Dynamic EU configuration of Slice/Sub-slice/EU
Subsystems (2)
v7 cover Dynamic EU configuration of Slice/Sub-slice/EU
drm/i915: Context aware user agnostic EU/Slice/Sub-slice control within kernel
This patch sets improves GPU power consumption on Linux kernel based OS such as Chromium OS, Ubuntu, etc. Following are the power savings.
Power savings on GLK-GT1 Bobba platform running on Chrome OS.
-----------------------------------------------| App /KPI | % Power Benefit (mW) | ------------------------|----------------------| Hangout Call- 20 minute | 1.8% | Youtube 4K VPB | 14.13% | WebGL Aquarium | 13.76% | Unity3D | 6.78% | | | ------------------------|----------------------| Chrome PLT | BatteryLife Improves | | by ~45 minute | -----------------------------------------------|
Power savings on KBL-GT3 running on Android and Ubuntu (Linux). -----------------------------------------------|
App /KPI | % Power Benefit (mW) |
|----------------------| | Android | Ubuntu | ------------------------|----------|-----------| 3D Mark (Ice storm) | 2.30% | N.A. | TRex On screen | 2.49% | 2.97% | Manhattan On screen | 3.11% | 4.90% | Carchase On Screen | N.A. | 5.06% | AnTuTu 6.1.4 | 3.42% | N.A. | SynMark2 | N.A. | 1.7% | -----------------------------------------------|
We have also observed GPU core residencies improves by 1.035%.
Technical Insights of the patch:
Current GPU configuration code for i915 does not allow us to change EU/Slice/Sub-slice configuration dynamically. Its done only once while context is created.
While particular graphics application is running, if we examine the command requests from user space, we observe that command density is not consistent. It means there is scope to change the graphics configuration dynamically even while context is running actively. This patch series proposes the solution to find the active pending load for all active context at given time and based on that, dynamically perform graphics configuration for each context.
The feature can be enabled using sysfs. We examine pending commands for a context in the queue, essentially, we intercept them before they are executed by GPU and we update context with required number of EUs.
For the prior one, empirical data to achieve best performance
in least power was considered. For the later one, we roughly categorized number of EUs logically based on platform. Now we compare number of pending commands with a particular threshold and then set number of EUs accordingly with update context. That threshold is also based on experiments & findings. If GPU is able to catch up with CPU, typically there are no pending commands, the EU config would remain unchanged there. In case there are more pending commands we reprogram context with higher number of EUs.
Ankit Navik (3):
drm/i915: Get active pending request for given context drm/i915: set optimum eu/slice/sub-slice configuration based on load
type
drm/i915: Predictive governor to control slice/subslice/eu
drivers/gpu/drm/i915/gem/i915_gem_context.c | 4 ++ drivers/gpu/drm/i915/gem/i915_gem_context_types.h | 37 +++++++++++ drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c | 2 + drivers/gpu/drm/i915/gt/intel_context_sseu.c | 2 + drivers/gpu/drm/i915/gt/intel_context_types.h | 2 + drivers/gpu/drm/i915/gt/intel_lrc.c | 79 ++++++++++++++++++++++- drivers/gpu/drm/i915/i915_drv.h | 5 ++ drivers/gpu/drm/i915/i915_sysfs.c | 32 +++++++++ drivers/gpu/drm/i915/intel_device_info.c | 55 +++++++++++++++- 9 files changed, 214 insertions(+), 4 deletions(-)
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v7 1/3 drm/i915: Get active pending request for given context
This patch gives us the active pending request count which is yet to be submitted to the GPU.
V2:
* Change 64-bit to atomic for request count. (Tvrtko Ursulin)
V3:
* Remove mutex for request count.
* Rebase.
* Fixes hitting underflow for predictive request. (Tvrtko Ursulin)
V4:
* Rebase.
V5:
* Rebase.
V6:
* Rebase.
V7:
* Rebase.
* Add GEM_BUG_ON for req_cnt.
--- drivers/gpu/drm/i915/gem/i915_gem_context.c | 1 + drivers/gpu/drm/i915/gem/i915_gem_context_types.h | 5 +++++ drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c | 2 ++ drivers/gpu/drm/i915/gt/intel_lrc.c | 9 +++++++++ 4 files changed, 17 insertions(+)
drivers/gpu/drm/i915/gem/i915_gem_context.c +1 -0
@@ -879,6 +879,7 @@ i915_gem_create_context(struct drm_i915_private *i915, unsigned int flags) }trace_i915_context_create (ctx); +atomic_set (&ctx->req_cnt,0 );return ctx; }
drivers/gpu/drm/i915/gem/i915_gem_context_types.h +5 -0
@@ -171,6 +171,11 @@ struct i915_gem_context {*/ struct radix_tree_root handles_vma; +/** req_cnt: tracks the pending commands, based on which we decide to +* go for low/medium/high load configuration of the GPU. +*/ +atomic_t req_cnt; +/** * @name: arbitrary name, used for user debug *
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c +2 -0
@@ -2565,6 +2565,8 @@ i915_gem_do_execbuffer(struct drm_device *dev,if (batch->private)intel_engine_pool_mark_active (batch->private, eb.request); +atomic_inc (&eb.gem_context->req_cnt); +trace_i915_request_queue (eb.request, eb.batch_flags); err =eb_submit (&eb, batch); err_request:
drivers/gpu/drm/i915/gt/intel_lrc.c +9 -0
@@ -2143,6 +2143,8 @@ static void execlists_dequeue(struct intel_engine_cs *engine) }if (__i915_request_submit (rq)) { +struct i915_gem_context *ctx; +if (!merge) { *port =execlists_schedule_in (last, port - execlists->pending); port++;
@@ -2158,6 +2160,13 @@ static void execlists_dequeue(struct intel_engine_cs *engine) submit = true; last = rq; + + ctx =rcu_dereference_protected ( + rq->context->gem_context, true); + +GEM_BUG_ON (atomic_read (&ctx->req_cnt)); +if (atomic_read (&ctx->req_cnt) >0 ) +atomic_dec (&ctx->req_cnt); } }
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v7 2/3 drm/i915: set optimum eu/slice/sub-slice configuration based on load type
In reply to Ankit NavikThis patch will select optimum eu/slice/sub-slice configuration based on type of load (low, medium, high) as input.
Based on our readings and experiments we have predefined set of optimum configuration for each platform(CHT, KBL). i915_gem_context_set_load_type will select optimum configuration from pre-defined optimum configuration table(opt_config).
It also introduce flag update_render_config which can set by any governor.
v2:
* Move static optimum_config to device init time.
* Rename function to appropriate name, fix data types and patch ordering.
* Rename prev_load_type to pending_load_type. (Tvrtko Ursulin)
v3:
* Add safe guard check in i915_gem_context_set_load_type.
* Rename struct from optimum_config to i915_sseu_optimum_config to avoid namespace clashes.
* Reduces memcpy for space efficient.
* Rebase.
* Improved commit message. (Tvrtko Ursulin)
v4:
* Move optimum config table to file scope. (Tvrtko Ursulin)
v5:
* Adds optimal table of slice/sub-slice/EU for Gen 9 GT1.
* Rebase.
v6:
* Rebase.
* Fix warnings.
v7:
* Fix return conditions.
* Remove i915_gem_context_set_load_type and move logic to __execlists_update_reg_state. (Tvrtko Ursulin)
--- drivers/gpu/drm/i915/gem/i915_gem_context.c | 3 + drivers/gpu/drm/i915/gem/i915_gem_context_types.h | 32 +++++++++++ drivers/gpu/drm/i915/gt/intel_context_sseu.c | 2 + drivers/gpu/drm/i915/gt/intel_context_types.h | 2 + drivers/gpu/drm/i915/gt/intel_lrc.c | 70 ++++++++++++++++++++++- drivers/gpu/drm/i915/i915_drv.h | 5 ++ drivers/gpu/drm/i915/intel_device_info.c | 55 +++++++++++++++++- 7 files changed, 165 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/gem/i915_gem_context.c +3 -0
@@ -880,6 +880,9 @@ i915_gem_create_context(struct drm_i915_private *i915, unsigned int flags)trace_i915_context_create (ctx);atomic_set (&ctx->req_cnt,0 ); + ctx->slice_cnt =hweight8 (RUNTIME_INFO (i915)->sseu.slice_mask); + ctx->subslice_cnt =hweight8 (RUNTIME_INFO (i915)->sseu.subslice_mask[0 ]); + ctx->eu_cnt =RUNTIME_INFO (i915)->sseu.eu_per_subslice;return ctx; }
drivers/gpu/drm/i915/gem/i915_gem_context_types.h +32 -0
@@ -46,6 +46,19 @@ struct i915_gem_engines_iter {const struct i915_gem_engines *engines; }; +enum gem_load_type { +LOAD_TYPE_LOW , +LOAD_TYPE_MEDIUM , +LOAD_TYPE_HIGH , +LOAD_TYPE_LAST +}; + +struct i915_sseu_optimum_config { +u8 slice; +u8 subslice; +u8 eu; +}; +/** * struct i915_gem_context - client state *
@@ -155,6 +168,25 @@ struct i915_gem_context {*/ atomic_t active_count; +/** slice_cnt: used to set the # of slices to be enabled. */ +u8 slice_cnt; + +/** subslice_cnt: used to set the # of subslices to be enabled. */ +u8 subslice_cnt; + +/** eu_cnt: used to set the # of eu to be enabled. */ +u8 eu_cnt; + +/** load_type: The designated load_type (high/medium/low) for a given +* number of pending commands in the command queue. +*/ +enum gem_load_type load_type; + +/** pending_load_type: The earlier load type that the GPU was configured +* for (high/medium/low). +*/ +enum gem_load_type pending_load_type; +/** * @hang_timestamp: The last time(s) this context caused a GPU hang */
drivers/gpu/drm/i915/gt/intel_context_sseu.c +2 -0
@@ -84,6 +84,8 @@ intel_context_reconfigure_sseu(struct intel_context *ce,if (ret)return ret; + ce->user_sseu = true; +/* Nothing to do if unmodified. */ if (!memcmp (&ce->sseu, &sseu,sizeof (sseu))) goto unlock;
drivers/gpu/drm/i915/gt/intel_context_types.h +2 -0
@@ -93,6 +93,8 @@ struct intel_context {const struct intel_context_ops *ops; +bool user_sseu; +/** sseu: Control eu/slice partitioning */ struct intel_sseu sseu; };
drivers/gpu/drm/i915/gt/intel_lrc.c +68 -2
102 lines not on this page · raw message
drivers/gpu/drm/i915/i915_drv.h +5 -0
@@ -926,6 +926,11 @@ struct drm_i915_private {/* protects panel power sequencer state */ struct mutex pps_mutex; +/* optimal slice/subslice/EU configration state */ +struct i915_sseu_optimum_config *opt_config; + +bool predictive_load_enable; +unsigned int fsb_freq, mem_freq, is_ddr3;unsigned int skl_preferred_vco_freq;unsigned int max_cdclk_freq;
drivers/gpu/drm/i915/intel_device_info.c +53 -2
71 lines not on this page · raw message
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
kbuild test robot
build botRe: [Intel-gfx] [PATCH v7 2/3] drm/i915: set optimum eu/slice/sub-slice configuration based on load type
Thank you for the patch! Perhaps something to improve:
Hi Ankit,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on drm-intel/for-linux-next]
[also build test WARNING on drm-tip/drm-tip next-20200316]
[cannot apply to v5.6-rc6]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
url: https://github.com/0day-ci/linux/commits/Ankit-Navik/Dynamic-EU-configuration-of-Slice-Sub-slice-EU/20200317-070836 base: git://anongit.freedesktop.org/drm-intel for-linux-next config: i386-allyesconfig (attached as .config) compiler: gcc-7 (Debian 7.5.0-5) 7.5.0 reproduce: # save the attached .config to linux build tree make ARCH=i386
If you fix the issue, kindly add following tag
All warnings (new ones prefixed by >>):
drivers/gpu/drm/i915/intel_device_info.c: In function 'intel_device_info_runtime_init':
>> drivers/gpu/drm/i915/intel_device_info.c:1061:24: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
dev_priv->opt_config = chv_config;
^
drivers/gpu/drm/i915/intel_device_info.c:1073:25: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
dev_priv->opt_config = glk_gt1_config;
^
drivers/gpu/drm/i915/intel_device_info.c:1078:25: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
dev_priv->opt_config = kbl_gt2_config;
^
drivers/gpu/drm/i915/intel_device_info.c:1083:25: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
dev_priv->opt_config = kbl_gt3_config;
^vim +/const +1061 drivers/gpu/drm/i915/intel_device_info.c
929
930 /**
931 * intel_device_info_runtime_init - initialize runtime info
932 * @dev_priv: the i915 device
933 *
934 * Determine various intel_device_info fields at runtime.
935 *
936 * Use it when either:
937 * - it's judged too laborious to fill n static structures with the limit
938 * when a simple if statement does the job,
939 * - run-time checks (eg read fuse/strap registers) are needed.
940 *
941 * This function needs to be called:
942 * - after the MMIO has been setup as we are reading registers,
943 * - after the PCH has been detected,
944 * - before the first usage of the fields it can tweak.
945 */
946 void intel_device_info_runtime_init(struct drm_i915_private *dev_priv)
947 {
948 struct intel_device_info *info = mkwrite_device_info(dev_priv);
949 struct intel_runtime_info *runtime = RUNTIME_INFO(dev_priv);
950 enum pipe pipe;
951
952 if (INTEL_GEN(dev_priv) >= 10) {
953 for_each_pipe(dev_priv, pipe)
954 runtime->num_scalers[pipe] = 2;
955 } else if (IS_GEN(dev_priv, 9)) {
956 runtime->num_scalers[PIPE_A] = 2;
957 runtime->num_scalers[PIPE_B] = 2;
958 runtime->num_scalers[PIPE_C] = 1;
959 }
960
961 BUILD_BUG_ON(BITS_PER_TYPE(intel_engine_mask_t) < I915_NUM_ENGINES);
962
963 if (INTEL_GEN(dev_priv) >= 11)
964 for_each_pipe(dev_priv, pipe)
965 runtime->num_sprites[pipe] = 6;
966 else if (IS_GEN(dev_priv, 10) || IS_GEMINILAKE(dev_priv))
967 for_each_pipe(dev_priv, pipe)
968 runtime->num_sprites[pipe] = 3;
969 else if (IS_BROXTON(dev_priv)) {
970 /*
971 * Skylake and Broxton currently don't expose the topmost plane as its
972 * use is exclusive with the legacy cursor and we only want to expose
973 * one of those, not both. Until we can safely expose the topmost plane
974 * as a DRM_PLANE_TYPE_CURSOR with all the features exposed/supported,
975 * we don't expose the topmost plane at all to prevent ABI breakage
976 * down the line.
977 */
978
979 runtime->num_sprites[PIPE_A] = 2;
980 runtime->num_sprites[PIPE_B] = 2;
981 runtime->num_sprites[PIPE_C] = 1;
982 } else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
983 for_each_pipe(dev_priv, pipe)
984 runtime->num_sprites[pipe] = 2;
985 } else if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv)) {
986 for_each_pipe(dev_priv, pipe)
987 runtime->num_sprites[pipe] = 1;
988 }
989
990 if (HAS_DISPLAY(dev_priv) && IS_GEN_RANGE(dev_priv, 7, 8) &&
991 HAS_PCH_SPLIT(dev_priv)) {
992 u32 fuse_strap = I915_READ(FUSE_STRAP);
993 u32 sfuse_strap = I915_READ(SFUSE_STRAP);
994
995 /*
996 * SFUSE_STRAP is supposed to have a bit signalling the display
997 * is fused off. Unfortunately it seems that, at least in
998 * certain cases, fused off display means that PCH display
999 * reads don't land anywhere. In that case, we read 0s.
1000 *
1001 * On CPT/PPT, we can detect this case as SFUSE_STRAP_FUSE_LOCK
1002 * should be set when taking over after the firmware.
1003 */
1004 if (fuse_strap & ILK_INTERNAL_DISPLAY_DISABLE ||
1005 sfuse_strap & SFUSE_STRAP_DISPLAY_DISABLED ||
1006 (HAS_PCH_CPT(dev_priv) &&
1007 !(sfuse_strap & SFUSE_STRAP_FUSE_LOCK))) {
1008 drm_info(&dev_priv->drm,
1009 "Display fused off, disabling\n");
1010 info->pipe_mask = 0;
1011 } else if (fuse_strap & IVB_PIPE_C_DISABLE) {
1012 drm_info(&dev_priv->drm, "PipeC fused off\n");
1013 info->pipe_mask &= ~BIT(PIPE_C);
1014 }
1015 } else if (HAS_DISPLAY(dev_priv) && INTEL_GEN(dev_priv) >= 9) {
1016 u32 dfsm = I915_READ(SKL_DFSM);
1017 u8 enabled_mask = info->pipe_mask;
1018
1019 if (dfsm & SKL_DFSM_PIPE_A_DISABLE)
1020 enabled_mask &= ~BIT(PIPE_A);
1021 if (dfsm & SKL_DFSM_PIPE_B_DISABLE)
1022 enabled_mask &= ~BIT(PIPE_B);
1023 if (dfsm & SKL_DFSM_PIPE_C_DISABLE)
1024 enabled_mask &= ~BIT(PIPE_C);
1025 if (INTEL_GEN(dev_priv) >= 12 &&
1026 (dfsm & TGL_DFSM_PIPE_D_DISABLE))
1027 enabled_mask &= ~BIT(PIPE_D);
1028
1029 /*
1030 * At least one pipe should be enabled and if there are
1031 * disabled pipes, they should be the last ones, with no holes
1032 * in the mask.
1033 */
1034 if (enabled_mask == 0 || !is_power_of_2(enabled_mask + 1))
1035 drm_err(&dev_priv->drm,
1036 "invalid pipe fuse configuration: enabled_mask=0x%x\n",
1037 enabled_mask);
1038 else
1039 info->pipe_mask = enabled_mask;
1040
1041 if (dfsm & SKL_DFSM_DISPLAY_HDCP_DISABLE)
1042 info->display.has_hdcp = 0;
1043
1044 if (dfsm & SKL_DFSM_DISPLAY_PM_DISABLE)
1045 info->display.has_fbc = 0;
1046
1047 if (INTEL_GEN(dev_priv) >= 11 && (dfsm & ICL_DFSM_DMC_DISABLE))
1048 info->display.has_csr = 0;
1049
1050 if (INTEL_GEN(dev_priv) >= 10 &&
1051 (dfsm & CNL_DFSM_DISPLAY_DSC_DISABLE))
1052 info->display.has_dsc = 0;
1053 }
1054
1055 /* Initialize slice/subslice/EU info */
1056 if (IS_HASWELL(dev_priv))
1057 hsw_sseu_info_init(dev_priv);
1058 else if (IS_CHERRYVIEW(dev_priv)) {
1059 cherryview_sseu_info_init(dev_priv);
1060 BUILD_BUG_ON(ARRAY_SIZE(chv_config) != LOAD_TYPE_LAST);
> 1061 dev_priv->opt_config = chv_config; 1062 }
1063 else if (IS_BROADWELL(dev_priv))
1064 bdw_sseu_info_init(dev_priv);
1065 else if (IS_GEN(dev_priv, 9)) {
1066 gen9_sseu_info_init(dev_priv);
1067
1068 switch (info->gt) {
1069 default: /* fall through */
1070 case 1:
1071 BUILD_BUG_ON(ARRAY_SIZE(glk_gt1_config) !=
1072 LOAD_TYPE_LAST);
1073 dev_priv->opt_config = glk_gt1_config;
1074 break;
1075 case 2:
1076 BUILD_BUG_ON(ARRAY_SIZE(kbl_gt2_config) !=
1077 LOAD_TYPE_LAST);
1078 dev_priv->opt_config = kbl_gt2_config;
1079 break;
1080 case 3:
1081 BUILD_BUG_ON(ARRAY_SIZE(kbl_gt3_config) !=
1082 LOAD_TYPE_LAST);
1083 dev_priv->opt_config = kbl_gt3_config;
1084 break;
1085 }
1086 }
1087 else if (IS_GEN(dev_priv, 10))
1088 gen10_sseu_info_init(dev_priv);
1089 else if (IS_GEN(dev_priv, 11))
1090 gen11_sseu_info_init(dev_priv);
1091 else if (INTEL_GEN(dev_priv) >= 12)
1092 gen12_sseu_info_init(dev_priv);
1093
1094 if (IS_GEN(dev_priv, 6) && intel_vtd_active()) {
1095 drm_info(&dev_priv->drm,
1096 "Disabling ppGTT for VT-d support\n");
1097 info->ppgtt_type = INTEL_PPGTT_NONE;
1098 }
1099
1100 runtime->rawclk_freq = intel_read_rawclk(dev_priv);
1101 drm_dbg(&dev_priv->drm, "rawclk rate: %d kHz\n", runtime->rawclk_freq);
1102
1103 /* Initialize command stream timestamp frequency */
1104 runtime->cs_timestamp_frequency_khz =
1105 read_timestamp_frequency(dev_priv);
1106 if (runtime->cs_timestamp_frequency_khz) {
1107 runtime->cs_timestamp_period_ns =
1108 div_u64(1e6, runtime->cs_timestamp_frequency_khz);
1109 drm_dbg(&dev_priv->drm,
1110 "CS timestamp wraparound in %lldms\n",
1111 div_u64(mul_u32_u32(runtime->cs_timestamp_period_ns,
1112 S32_MAX),
1113 USEC_PER_SEC));
1114 }
1115 }
1116
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
PATCH v7 3/3 drm/i915: Predictive governor to control slice/subslice/eu
In reply to Ankit NavikLoad classification is used for predictive governor to control eu/slice/subslice based on workloads.
sysfs is provided to enable/disable the feature
V2:
* Fix code style.
* Move predictive_load_timer into a drm_i915_private structure.
* Make generic function to set optimum config. (Tvrtko Ursulin)
V3:
* Rebase.
* Fix race condition for predictive load set.
* Add slack to start hrtimer for more power efficient. (Tvrtko Ursulin)
V4:
* Fix data type and initialization of mutex to protect predictive load state.
* Move predictive timer init to i915_gem_init_early. (Tvrtko Ursulin)
* Move debugfs to kernel parameter.
V5:
* Rebase.
* Remove mutex for pred_timer
V6:
* Rebase.
* Fix warnings.
V7:
* Drop timer and move logic to __execlists_update_reg_state. (Tvrtko Ursulin)
* Remove kernel boot param and make it to sysfs entry. (Jani Nikula)
--- drivers/gpu/drm/i915/i915_sysfs.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+)
drivers/gpu/drm/i915/i915_sysfs.c +32 -0
@@ -433,12 +433,43 @@ static ssize_t gt_min_freq_mhz_store(struct device *kdev,return ret ?: count; } +static ssize_t deu_enable_show (struct device *kdev,struct device_attribute *attr,char *buf) +{ +struct drm_i915_private *i915 =kdev_minor_to_i915 (kdev); + +return snprintf (buf,PAGE_SIZE ,"%u\n" , i915->predictive_load_enable); +} + +static ssize_t deu_enable_store (struct device *kdev, +struct device_attribute *attr, +const char *buf, +size_t count) +{ +struct drm_i915_private *i915 =kdev_minor_to_i915 (kdev); +ssize_t ret; +u32 val; + + ret =kstrtou32 (buf,0 , &val); +if (ret) +return ret; + +/* Check invalid values */ +if (val !=0 && val !=1 ) + ret = -EINVAL ; + + i915->predictive_load_enable = val; + +return count; +} +static DEVICE_ATTR_RO (gt_act_freq_mhz);static DEVICE_ATTR_RO (gt_cur_freq_mhz);static DEVICE_ATTR_RW (gt_boost_freq_mhz);static DEVICE_ATTR_RW (gt_max_freq_mhz);static DEVICE_ATTR_RW (gt_min_freq_mhz); +static DEVICE_ATTR_RW (deu_enable); +static DEVICE_ATTR_RO (vlv_rpe_freq_mhz);static ssize_t gt_rp_mhz_show (struct device *kdev,struct device_attribute *attr,char *buf);
@@ -474,6 +505,7 @@ static const struct attribute * const gen6_attrs[] = { &dev_attr_gt_RP0_freq_mhz.attr, &dev_attr_gt_RP1_freq_mhz.attr, &dev_attr_gt_RPn_freq_mhz.attr, + &dev_attr_deu_enable.attr, NULL, };
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI[Intel-gfx] ✗ Fi.CI.BUILD: failure for Dynamic EU configuration of Slice/Sub-slice/EU (rev7)
In reply to Ankit Navik== Series Details ==
== Series Details ==
Series: Dynamic EU configuration of Slice/Sub-slice/EU (rev7)
URL : https://patchwork.freedesktop.org/series/69980/
State : failure
== Summary ==
CALL scripts/checksyscalls.sh
CALL scripts/atomic/check-atomics.sh
DESCEND objtool
CHK include/generated/compile.h
CC [M] drivers/gpu/drm/i915/intel_device_info.odrivers/gpu/drm/i915/intel_device_info.c: In function ‘intel_device_info_runtime_init’:drivers/gpu/drm/i915/intel_device_info.c:1061:24: error: assignment discards ‘const’ qualifier from pointer target type [-Werror=discarded-qualifiers]
dev_priv->opt_config = chv_config;
^
drivers/gpu/drm/i915/intel_device_info.c:1073:25: error: assignment discards ‘const’ qualifier from pointer target type [-Werror=discarded-qualifiers]
dev_priv->opt_config = glk_gt1_config;
^
drivers/gpu/drm/i915/intel_device_info.c:1078:25: error: assignment discards ‘const’ qualifier from pointer target type [-Werror=discarded-qualifiers]
dev_priv->opt_config = kbl_gt2_config;
^
drivers/gpu/drm/i915/intel_device_info.c:1083:25: error: assignment discards ‘const’ qualifier from pointer target type [-Werror=discarded-qualifiers]
dev_priv->opt_config = kbl_gt3_config;
^cc1: all warnings being treated as errorsscripts/Makefile.build:267: recipe for target 'drivers/gpu/drm/i915/intel_device_info.o' failed make[4]: *** [drivers/gpu/drm/i915/intel_device_info.o] Error 1 scripts/Makefile.build:505: recipe for target 'drivers/gpu/drm/i915' failed make[3]: *** [drivers/gpu/drm/i915] Error 2scripts/Makefile.build:505: recipe for target 'drivers/gpu/drm' failed
make[2]: *** [drivers/gpu/drm] Error 2scripts/Makefile.build:505: recipe for target 'drivers/gpu' failed
make[1]: *** [drivers/gpu] Error 2
Makefile:1683: recipe for target 'drivers' failed
make: *** [drivers] Error 2
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx