bnxt_en: Bug fixes.
Michael Chan
maintainercover bnxt_en: Bug fixes.
5 bug fix patches covering an indexing bug for priority counters, memory leak when retrieving DCB ETS settings, error path return code, proper disabling of PCI before freeing context memory, and proper ring accounting in error path.
Please also apply these to -stable. Thanks.
Edwin Peer (1):
bnxt_en: fix memory leaks in bnxt_dcbnl_ieee_getets()
Michael Chan (3):
bnxt_en: Fix Priority Bytes and Packets counters in ethtool -S.
bnxt_en: Return error if bnxt_alloc_ctx_mem() fails.
bnxt_en: Free context memory after disabling PCI in probe error path.
Vasundhara Volam (1):
bnxt_en: Reset rings if ring reservation fails during open()
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 28 ++++++++++++++++------- drivers/net/ethernet/broadcom/bnxt/bnxt.h | 2 +- drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c | 15 ++++++++---- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 8 +++---- 4 files changed, 35 insertions(+), 18 deletions(-)
Signature · 1 line
2.5.1
Michael Chan
maintainerPATCH 1/5 bnxt_en: Fix Priority Bytes and Packets counters in ethtool -S.
There is an indexing bug in determining these ethtool priority counters. Instead of using the queue ID to index, we need to normalize by modulo 10 to get the index. This index is then used to obtain the proper CoS queue counter. Rename bp->pri2cos to bp->pri2cos_idx to make this more clear.
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 10 +++++++++- drivers/net/ethernet/broadcom/bnxt/bnxt.h | 2 +- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 8 ++++---- 3 files changed, 14 insertions(+), 6 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +9 -1
@@ -7406,14 +7406,22 @@ static int bnxt_hwrm_port_qstats_ext(struct bnxt *bp) pri2cos = &resp2->pri0_cos_queue_id;for (i =0 ; i <8 ; i++) {u8 queue_id = pri2cos[i]; +u8 queue_idx; +/* Per port queue IDs start from 0, 10, 20, etc */ + queue_idx = queue_id %10 ; +if (queue_idx >BNXT_MAX_QUEUE ) { + bp->pri2cos_valid = false; + goto qstats_done; + }for (j =0 ; j < bp->max_q; j++) {if (bp->q_ids[j] == queue_id) - bp->pri2cos[i] = j; + bp->pri2cos_idx[i] = queue_idx; } } bp->pri2cos_valid =1 ; } +qstats_done:mutex_unlock (&bp->hwrm_cmd_lock);return rc; }
drivers/net/ethernet/broadcom/bnxt/bnxt.h +1 -1
@@ -1716,7 +1716,7 @@ struct bnxt {u16 fw_rx_stats_ext_size;u16 fw_tx_stats_ext_size;u16 hw_ring_stats_size; -u8 pri2cos[8 ]; +u8 pri2cos_idx[8 ];u8 pri2cos_valid;u16 hwrm_max_req_len;
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +4 -4
@@ -589,25 +589,25 @@ static void bnxt_get_ethtool_stats(struct net_device *dev,if (bp->pri2cos_valid) {for (i =0 ; i <8 ; i++, j++) {long n = bnxt_rx_bytes_pri_arr[i].base_off + - bp->pri2cos[i]; + bp->pri2cos_idx[i]; buf[j] =le64_to_cpu (*(rx_port_stats_ext + n)); }for (i =0 ; i <8 ; i++, j++) {long n = bnxt_rx_pkts_pri_arr[i].base_off + - bp->pri2cos[i]; + bp->pri2cos_idx[i]; buf[j] =le64_to_cpu (*(rx_port_stats_ext + n)); }for (i =0 ; i <8 ; i++, j++) {long n = bnxt_tx_bytes_pri_arr[i].base_off + - bp->pri2cos[i]; + bp->pri2cos_idx[i]; buf[j] =le64_to_cpu (*(tx_port_stats_ext + n)); }for (i =0 ; i <8 ; i++, j++) {long n = bnxt_tx_pkts_pri_arr[i].base_off + - bp->pri2cos[i]; + bp->pri2cos_idx[i]; buf[j] =le64_to_cpu (*(tx_port_stats_ext + n)); }
Signature · 1 line
2.5.1
Michael Chan
maintainerPATCH 2/5 bnxt_en: fix memory leaks in bnxt_dcbnl_ieee_getets()
In reply to Michael ChanFrom: Edwin Peer <[email protected]>
The allocated ieee_ets structure goes out of scope without being freed, leaking memory. Appropriate result codes should be returned so that callers do not rely on invalid data passed by reference.
Also cache the ETS config retrieved from the device so that it doesn't need to be freed. The balance of the code was clearly written with the intent of having the results of querying the hardware cached in the device structure. The commensurate store was evidently missed though.
--- drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c +10 -5
@@ -479,24 +479,26 @@ static int bnxt_dcbnl_ieee_getets(struct net_device *dev, struct ieee_ets *ets) {struct bnxt *bp =netdev_priv (dev);struct ieee_ets *my_ets = bp->ieee_ets; +int rc; ets->ets_cap = bp->max_tc;if (!my_ets) { -int rc; -if (bp->dcbx_cap &DCB_CAP_DCBX_HOST )return 0 ; my_ets =kzalloc (sizeof (*my_ets),GFP_KERNEL );if (!my_ets) -return 0 ; +return -ENOMEM ; rc =bnxt_hwrm_queue_cos2bw_qcfg (bp, my_ets);if (rc) -return 0 ; + goto error; rc =bnxt_hwrm_queue_pri2cos_qcfg (bp, my_ets);if (rc) -return 0 ; + goto error; + +/* cache result */ + bp->ieee_ets = my_ets; } ets->cbs = my_ets->cbs;
@@ -505,6 +507,9 @@ static int bnxt_dcbnl_ieee_getets(struct net_device *dev, struct ieee_ets *ets)memcpy (ets->tc_tsa, my_ets->tc_tsa,sizeof (ets->tc_tsa));memcpy (ets->prio_tc, my_ets->prio_tc,sizeof (ets->prio_tc));return 0 ; +error: +kfree (my_ets); +return rc; }static int bnxt_dcbnl_ieee_setets (struct net_device *dev,struct ieee_ets *ets)
Signature · 1 line
2.5.1
Michael Chan
maintainerPATCH 3/5 bnxt_en: Return error if bnxt_alloc_ctx_mem() fails.
In reply to Michael ChanThe current code ignores the return value from bnxt_hwrm_func_backing_store_cfg(), causing the driver to proceed in the init path even when this vital firmware call has failed. Fix it by propagating the error code to the caller.
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +4 -4
@@ -6880,12 +6880,12 @@ static int bnxt_alloc_ctx_mem(struct bnxt *bp) } ena |=FUNC_BACKING_STORE_CFG_REQ_DFLT_ENABLES ; rc =bnxt_hwrm_func_backing_store_cfg (bp, ena); -if (rc) +if (rc) {netdev_err (bp->dev,"Failed configuring context mem, rc = %d.\n" , rc); -else - ctx->flags |=BNXT_CTX_FLAG_INITED ; - +return rc; + } + ctx->flags |=BNXT_CTX_FLAG_INITED ;return 0 ; }
Signature · 1 line
2.5.1
Michael Chan
maintainerPATCH 4/5 bnxt_en: Free context memory after disabling PCI in probe error path.
In reply to Michael ChanOther shutdown code paths will always disable PCI first to shutdown DMA before freeing context memory. Do the same sequence in the error path of probe to be safe and consistent.
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +3 -3
@@ -11970,12 +11970,12 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)bnxt_hwrm_func_drv_unrgtr (bp);bnxt_free_hwrm_short_cmd_req (bp);bnxt_free_hwrm_resources (bp); -bnxt_free_ctx_mem (bp); -kfree (bp->ctx); - bp->ctx =NULL ;kfree (bp->fw_health); bp->fw_health =NULL ;bnxt_cleanup_pci (bp); +bnxt_free_ctx_mem (bp); +kfree (bp->ctx); + bp->ctx =NULL ; init_err_free:free_netdev (dev);
Signature · 1 line
2.5.1
Michael Chan
maintainerPATCH 5/5 bnxt_en: Reset rings if ring reservation fails during open()
In reply to Michael ChanFrom: Vasundhara Volam <[email protected]>
If ring counts are not reset when ring reservation fails, bnxt_init_dflt_ring_mode() will not be called again to reinitialise IRQs when open() is called and results in system crash as napi will also be not initialised. This patch fixes it by resetting the ring counts.
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +4 -0
@@ -11677,6 +11677,10 @@ static int bnxt_set_dflt_rings(struct bnxt *bp, bool sh) bp->rx_nr_rings++; bp->cp_nr_rings++; } +if (rc) { + bp->tx_nr_rings =0 ; + bp->rx_nr_rings =0 ; + }return rc; }
Signature · 1 line
2.5.1
Quoted 6 lines · On Sun, 22 Mar 2020 16:40:00 -0400 Michael Chan wrote:
5 bug fix patches covering an indexing bug for priority counters, memory leak when retrieving DCB ETS settings, error path return code, proper disabling of PCI before freeing context memory, and proper ring accounting in error path.
Please also apply these to -stable. Thanks.
From: Michael Chan <[email protected]>
Date: Sun, 22 Mar 2020 16:40:00 -0400
Quoted 4 lines
5 bug fix patches covering an indexing bug for priority counters, memory leak when retrieving DCB ETS settings, error path return code, proper disabling of PCI before freeing context memory, and proper ring accounting in error path.
Series applied.
Quoted 1 line
Please also apply these to -stable. Thanks.
Queued up, thanks.