i2c: t210: Add VI_I2C clock source support
Subsystems (3)
PATCH 1/1 i2c: t210: Add VI_I2C clock source support
From: Tom Warren <[email protected]>
Fix VI_I2C clock source type. Will be needed by VI_I2C driver. Also added use of INTERNAL_ID macro in two places, needed to keep the id returned to 8 bits.
Signed-off-by Tom Warren <[email protected]>
--- arch/arm/mach-tegra/tegra210/clock.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/mach-tegra/tegra210/clock.c +4 -4
@@ -1,6 +1,6 @@// SPDX-License-Identifier: GPL-2.0+ /* -* (C) Copyright 2013-2015 +* (C) Copyright 2013-2020 * NVIDIA Corporation <www.nvidia.com> */
@@ -333,7 +333,7 @@ static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {TYPE (PERIPHC_DMIC3 ,CLOCK_TYPE_NONE ),TYPE (PERIPHC_APE ,CLOCK_TYPE_NONE ),TYPE (PERIPHC_QSPI ,CLOCK_TYPE_PC01C00_C42C41TC40 ), -TYPE (PERIPHC_VI_I2C ,CLOCK_TYPE_NONE ), +TYPE (PERIPHC_VI_I2C ,CLOCK_TYPE_PC2CC3M_T16 ),TYPE (PERIPHC_USB2_HSIC_TRK ,CLOCK_TYPE_NONE ), TYPE(PERIPHC_PEX_SATA_USB_RX_BYP, CLOCK_TYPE_NONE),
@@ -739,7 +739,7 @@ int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,if (!clock_periph_id_isvalid (periph_id))return -1 ; - internal_id = periph_id_to_internal_id[periph_id]; + internal_id =INTERNAL_ID (periph_id_to_internal_id[periph_id]);if (!periphc_internal_id_isvalid (internal_id))return -1 ;
@@ -765,7 +765,7 @@ enum clock_id get_periph_clock_id(enum periph_id periph_id, int source)if (!clock_periph_id_isvalid (periph_id))return CLOCK_ID_NONE ; - internal_id = periph_id_to_internal_id[periph_id]; + internal_id =INTERNAL_ID (periph_id_to_internal_id[periph_id]);if (!periphc_internal_id_isvalid (internal_id))return CLOCK_ID_NONE ;
Signature · 9 lines
1.8.2.1.610.g562af5b ----------------------------------------------------------------------------------- This email message is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. -----------------------------------------------------------------------------------