arm64: defconfig: Enable various configs for TI platforms
cover arm64: defconfig: Enable various configs for TI platforms
This patch series enables various config options needed by TI Platform.
bloat-o-meter reports after this change add/remove: 4/0 grow/shrink: 2/0 up/down: 1592/0 (1592) [...]
Total: Before=27997071, After=27998663, chg +0.01%
Aradhya Bhatia (1):
arm64: defconfig: Enable PWM drivers for TI ECAP
Hari Nagalla (1):
arm64: defconfig: enable TI OMAP2 mailbox and K3 remote proc drivers
Jayesh Choudhary (1):
arm64: defconfig: Enable SND_SOC_J721E_EVM for audio support
Judith Mendez (1):
arm64: defconfig: Enable MCAN driver
MD Danish Anwar (1):
arm64: defconfig: Enable DP83869 Driver
Udit Kumar (2):
arm64: defconfig: Enable UFS config
arm64: defconfig: Enable K3 RTI Watchdog
arch/arm64/configs/defconfig | 13 +++++++++++++ 1 file changed, 13 insertions(+)
Signature · 1 line
2.34.1
PATCH 1/7 arm64: defconfig: Enable PWM drivers for TI ECAP
From: Aradhya Bhatia <[email protected]>
TI's K3 SoCs uses the Enhanced high resolution PWM (EHRPWM) and the Enhanced Capture (ECAP) modules for generating PWM signals, which are used in various applications.
One such example is controlling the backlight power of the display panels connected to the am642, am65 iot2050 EVMs boards.
This patch enables TI ECAP to be built as module.
--- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
@@ -1356,6 +1356,7 @@ CONFIG_PWM_SAMSUNG=y CONFIG_PWM_SL28CPLD=m CONFIG_PWM_SUN4I=m CONFIG_PWM_TEGRA=m +CONFIG_PWM_TIECAP=m CONFIG_PWM_TIEHRPWM=m CONFIG_PWM_VISCONTI=m CONFIG_SL28CPLD_INTC=y
Signature · 1 line
2.34.1
PATCH 2/7 arm64: defconfig: enable TI OMAP2 mailbox and K3 remote proc drivers
In reply to Udit KumarFrom: Hari Nagalla <[email protected]>
Enable TI OMAP2 mailbox driver. This driver is used in TI K3 platforms as well for communications with remote processors.
Also enable Cortex R5 and TI DSP (C66x,C71x) remote proc drivers as modules.
Needed by AM64, J7200,J721E and J784S4 platforms.
--- arch/arm64/configs/defconfig | 3 +++ 1 file changed, 3 insertions(+)
arch/arm64/configs/defconfig +3 -0
@@ -1230,6 +1230,7 @@ CONFIG_TEGRA186_TIMER=y CONFIG_RENESAS_OSTM=y CONFIG_ARM_MHU=y CONFIG_IMX_MBOX=y +CONFIG_OMAP2PLUS_MBOX=m CONFIG_PLATFORM_MHU=y CONFIG_BCM2835_MBOX=y CONFIG_QCOM_APCS_IPC=y
@@ -1242,6 +1243,8 @@ CONFIG_MTK_IOMMU=y CONFIG_QCOM_IOMMU=y CONFIG_REMOTEPROC=y CONFIG_IMX_REMOTEPROC=y +CONFIG_TI_K3_R5_REMOTEPROC=m +CONFIG_TI_K3_DSP_REMOTEPROC=m CONFIG_MTK_SCP=m CONFIG_QCOM_Q6V5_ADSP=m CONFIG_QCOM_Q6V5_MSS=m
Signature · 1 line
2.34.1
PATCH 3/7 arm64: defconfig: Enable DP83869 Driver
In reply to Udit KumarFrom: MD Danish Anwar <[email protected]>
Enable GPIO multiplexer and DP83869 driver to support selection of second PHY for AM64x EVM.
--- arch/arm64/configs/defconfig | 2 ++ 1 file changed, 2 insertions(+)
arch/arm64/configs/defconfig +2 -0
@@ -375,6 +375,7 @@ CONFIG_AT803X_PHY=y CONFIG_REALTEK_PHY=y CONFIG_ROCKCHIP_PHY=y CONFIG_DP83867_PHY=y +CONFIG_DP83869_PHY=m CONFIG_DP83TD510_PHY=y CONFIG_VITESSE_PHY=y CONFIG_CAN_FLEXCAN=m
@@ -1445,6 +1446,7 @@ CONFIG_FPGA_REGION=m CONFIG_OF_FPGA_REGION=m CONFIG_TEE=y CONFIG_OPTEE=y +CONFIG_MUX_GPIO=m CONFIG_MUX_MMIO=y CONFIG_SLIMBUS=m CONFIG_SLIM_QCOM_CTRL=m
Signature · 1 line
2.34.1
PATCH 4/7 arm64: defconfig: Enable SND_SOC_J721E_EVM for audio support
In reply to Udit KumarFrom: Jayesh Choudhary <[email protected]>
Enable CONFIG_SND_SOC_J721E_EVM which is required to enable audio in J721E Platform.
--- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
@@ -928,6 +928,7 @@ CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m CONFIG_SND_SOC_PCM3168A_I2C=m CONFIG_SND_SOC_RT5640=m +CONFIG_SND_SOC_J721E_EVM=m CONFIG_SND_SOC_RT5659=m CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m CONFIG_SND_SOC_SIMPLE_MUX=m
Signature · 1 line
2.34.1
Re: [PATCH 4/7] arm64: defconfig: Enable SND_SOC_J721E_EVM for audio support
Quoted 9 lines · Udit Kumar
From: Jayesh Choudhary <[email protected]>
Enable
CONFIG_SND_SOC_J721E_EVMwhich is required to enable audio in J721E Platform.Signed-off-by Jayesh Choudhary <[email protected]>Signed-off-by Vignesh Raghavendra <[email protected]>Signed-off-by Udit Kumar <[email protected]>---
Do not enable configs one-by-one. Squash most of your patches.
Best regards,
Krzysztof
PATCH 5/7 arm64: defconfig: Enable MCAN driver
In reply to Udit KumarFrom: Judith Mendez <[email protected]>
Enable CAN_M_CAN and CAN_M_CAN_PLATFORM to be built as modules by default.
CAN is used in AM68 SK, J721E EVM, J721S2, AM642 AM642-Phyboards.
--- arch/arm64/configs/defconfig | 2 ++ 1 file changed, 2 insertions(+)
arch/arm64/configs/defconfig +2 -0
@@ -180,6 +180,8 @@ CONFIG_NET_ACT_GATE=m CONFIG_QRTR_SMD=m CONFIG_QRTR_TUN=m CONFIG_CAN=m +CONFIG_CAN_M_CAN=m +CONFIG_CAN_M_CAN_PLATFORM=m CONFIG_BT=m CONFIG_BT_HIDP=m # CONFIG_BT_LE is not set
Signature · 1 line
2.34.1
Re: [PATCH 5/7] arm64: defconfig: Enable MCAN driver
Hi Udit,
Quoted 19 lines · Udit Kumar
From: Judith Mendez <[email protected]>
Enable
CAN_M_CANandCAN_M_CAN_PLATFORMto be built as modules by default.
CAN is used in AM68 SK, J721E EVM, J721S2, AM642 AM642-Phyboards.Signed-off-by Judith Mendez <[email protected]>Signed-off-by Vignesh Raghavendra <[email protected]>Signed-off-by Udit Kumar <[email protected]>--- arch/arm64/configs/defconfig | 2 ++ 1 file changed, 2 insertions(+)arch/arm64/configs/defconfig +0
-0
arch/arm64/configs/defconfig CONFIG_NET_ACT_GATE=m · line 187
Quoted 8 lines
arch/arm64/configs/defconfig +2
-0@@ -180,6 +180,8 @@ CONFIG_NET_ACT_GATE=m CONFIG_QRTR_SMD=m CONFIG_QRTR_TUN=m CONFIG_CAN=m +CONFIG_CAN_M_CAN=m +CONFIG_CAN_M_CAN_PLATFORM=m CONFIG_BT=m CONFIG_BT_HIDP=m # CONFIG_BT_LE is not set
Was about to send this patch as well. Thanks for sending!
~ Judith
PATCH 6/7 arm64: defconfig: Enable UFS config
In reply to Udit KumarThis patch enables UFS BSG device node.
Also enable CDNS and TI UFS drivers as modules, needed for UFS feature on TI platform J721E EVM .
--- arch/arm64/configs/defconfig | 3 +++ 1 file changed, 3 insertions(+)
arch/arm64/configs/defconfig +3 -0
@@ -1052,10 +1052,13 @@ CONFIG_MMC_SDHCI_XENON=y CONFIG_MMC_SDHCI_AM654=y CONFIG_MMC_OWL=y CONFIG_SCSI_UFSHCD=y +CONFIG_SCSI_UFS_BSG=y CONFIG_SCSI_UFSHCD_PLATFORM=y +CONFIG_SCSI_UFS_CDNS_PLATFORM=m CONFIG_SCSI_UFS_QCOM=m CONFIG_SCSI_UFS_HISI=y CONFIG_SCSI_UFS_RENESAS=m +CONFIG_SCSI_UFS_TI_J721E=m CONFIG_SCSI_UFS_EXYNOS=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y
Signature · 1 line
2.34.1
PATCH 7/7 arm64: defconfig: Enable K3 RTI Watchdog
In reply to Udit KumarTI's K3 SOC Family has RTI (Real Time Interrupt) watchdog timer.
This patch enables TI RTI watchdog driver to be built as module.
RTI watchdog are supported on AM62, AM62A, AM64, AM65, J721E and J7200 TI SOC.
--- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
@@ -690,6 +690,7 @@ CONFIG_UNIPHIER_WATCHDOG=y CONFIG_PM8916_WATCHDOG=m CONFIG_BCM2835_WDT=y CONFIG_BCM7038_WDT=m +CONFIG_K3_RTI_WATCHDOG=m CONFIG_MFD_ALTERA_SYSMGR=y CONFIG_MFD_BD9571MWV=y CONFIG_MFD_AXP20X_I2C=y
Signature · 1 line
2.34.1
Quoted 6 lines · Udit Kumar
This patch series enables various config options needed by TI Platform.
bloat-o-meter reports after this change add/remove: 4/0 grow/shrink: 2/0 up/down: 1592/0 (1592) [...]
Total: Before=27997071, After=27998663, chg +0.01%
This all look good to me, I assume Nishanth or Vignesh will pick them up into their git tree and send them to [email protected] in their coming pull requests.
Arnd