powerpc/perf: Add documentation around use of "ppc_set_pmu_inuse" in PMU core-book3s
PATCH v2 1/1 powerpc/perf: Add documentation around use of "ppc_set_pmu_inuse" in PMU core-book3s
From: Madhavan Srinivasan <[email protected]>
"pmcregs_in_use" flag is part of lppaca (Virtual Process Area), which is used to indicate whether Performance Monitoring Unit (PMU) and PMU sprs are in-use and whether should it be saved/restored by hypervisor. ppc_set_pmu_inuse() is used to set/unset the VPA flag "pmcregs_in_use". "pmcregs_in_use" flag is set in "power_pmu_enable" via ppc_set_pmu_inuse(1) and it is unset when there are no active events (n_events == 0 condition).
Patch here adds documentation on the ppc_set_pmu_inuse() usage.
Signed-off-by Madhavan Srinivasan <[email protected]>
Signed-off-by Athira Rajeev <[email protected]>
---
Changes in v2:
- Corrected the patch author information
arch/powerpc/perf/core-book3s.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/powerpc/perf/core-book3s.c +10 -0
@@ -1285,6 +1285,11 @@ static void power_pmu_enable(struct pmu *pmu) goto out;if (cpuhw->n_events ==0 ) { +/* +* Indicate PMU not in-use to Hypervisor. +* We end-up here via "ctx_sched_out()" from common code and +* "power_pmu_del()". +*/ ppc_set_pmu_inuse (0 ); goto out; }
@@ -1341,6 +1346,11 @@ static void power_pmu_enable(struct pmu *pmu)* Write the new configuration to MMCR* with the freeze * bit set and set the hardware events to their initial values. * Then unfreeze the events. +* ppc_set_pmu_inuse(1): "power_pmu_enable" will unset the +* "pmcregs_in_use" flag when a previous profiling/sampling session +* is completed and un-setting of flag will notify the Hypervisor to +* drop save/restore of PMU sprs. Now that PMU need to be enabled, first +* set the "pmcregs_in_use" flag in VPA. */ ppc_set_pmu_inuse (1 );mtspr (SPRN_MMCRA , cpuhw->mmcr[2 ] & ~MMCRA_SAMPLE_ENABLE );
Signature · 1 line
1.8.3.1