Skip to contentSkip to conversation

remoteproc updates for v5.7

GIT PULL Applied Bjorn Andersson 6 participants 7 messages Apr 2, 2020 – Apr 16, 2020 Remote processor (remoteproc)

lore
Share & tools
lore
#0 lore raw

The following changes since commit bb6d3fb354c5ee8d6bde2d576eb7220ea09862b9:

Linux 5.6-rc1 (2020-02-09 16:08:48 -0800)

are available in the Git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc.git tags/rproc-v5.7

for you to fetch changes up to a7084c3d47c4aaedcca217ce87b7b5b5fe3cfa35:

remoteproc/omap: Switch to SPDX license identifiers (2020-03-25 22:29:51 -0700)

----------------------------------------------------------------
remoteproc updates for v5.7

This introduces a range of improvements to the OMAP remoeteproc driver; among other things adding devicetree, suspend/resume and watchdog support, and adds support the remoteprocs in the DRA7xx SoC.

It introduces support for 64-bit firmware, extends the ELF loader to support this and fixes for a number of race conditions in the recovery handling.

It introduces a generic mechanism to allow remoteproc drivers to sync state with remote processors during a panic, and uses this to prepare Qualcomm remote processors for post mortem analysis.

Finally it introduces fixes to cleanly recover from crashes in the modem firmware on production Qualcomm devices.

----------------------------------------------------------------
Ahmad Fatoum (1):
remoteproc: stm32: demote warning about optional property absence

Alex Elder (3):
remoteproc: re-check state in rproc_trigger_recovery()
remoteproc: remoteproc debugfs file fixes
remoteproc: return error for bad "recovery" debugfs input

Arnaud Pouliquen (1):
remoteproc: fix kernel-doc warnings

Bjorn Andersson (6):
remoteproc: qcom_q6v5_mss: Don't reassign mpss region on shutdown
remoteproc: qcom_q6v5_mss: Validate each segment during loading
remoteproc: Traverse rproc_list under RCU read lock
remoteproc: Introduce "panic" callback in ops
remoteproc: qcom: q6v5: Add common panic handler
remoteproc: qcom: Introduce panic handler for PAS and ADSP

Clement Leger (8):
remoteproc: Use size_t type for len in da_to_va
remoteproc: Use size_t instead of int for rproc_mem_entry len
remoteproc: Use u64 type for boot_addr
remoteproc: Add elf helpers to access elf64 and elf32 fields
remoteproc: Rename rproc_elf_sanity_check for elf32
remoteproc: Add elf64 support in elf loader
remoteproc: Allow overriding only sanity_check
remoteproc: Adapt coredump to generate correct elf type

Nathan Chancellor (1):
remoteproc/mediatek: Use size_t type for len in scp_da_to_va

Nikita Shubin (1):
remoteproc: Fix NULL pointer dereference in rproc_virtio_notify

Sibi Sankar (1):
remoteproc: qcom_q6v5_mss: Reload the mba region on coredump

Suman Anna (14):
dt-bindings: remoteproc: Add OMAP remoteproc bindings remoteproc/omap: Add device tree support remoteproc/omap: Add a sanity check for DSP boot address alignment remoteproc/omap: Add support to parse internal memories from DT remoteproc/omap: Add the rproc ops .da_to_va() implementation remoteproc/omap: Initialize and assign reserved memory node remoteproc/omap: Add support for DRA7xx remote processors remoteproc/omap: Check for undefined mailbox messages remoteproc/omap: Request a timer(s) for remoteproc usage remoteproc/omap: Add support for system suspend/resume remoteproc/omap: Add support for runtime auto-suspend/resume remoteproc/omap: Report device exceptions and trigger recovery remoteproc/omap: Add watchdog functionality for remote processors remoteproc/omap: Switch to SPDX license identifiers

Tero Kristo (1):
remoteproc/omap: Remove the platform_data header

 .../bindings/remoteproc/ti,omap-remoteproc.yaml    |  324 ++++++
 Documentation/remoteproc.txt                       |    2 +-
 drivers/remoteproc/Kconfig                         |   14 +-
 drivers/remoteproc/imx_rproc.c                     |   11 +-
 drivers/remoteproc/keystone_remoteproc.c           |    4 +-
 drivers/remoteproc/mtk_scp.c                       |    2 +-
 drivers/remoteproc/omap_remoteproc.c               | 1200 +++++++++++++++++++-
 drivers/remoteproc/omap_remoteproc.h               |   50 +-
 drivers/remoteproc/qcom_q6v5.c                     |   20 +
 drivers/remoteproc/qcom_q6v5.h                     |    1 +
 drivers/remoteproc/qcom_q6v5_adsp.c                |   10 +-
 drivers/remoteproc/qcom_q6v5_mss.c                 |  133 ++-
 drivers/remoteproc/qcom_q6v5_pas.c                 |   10 +-
 drivers/remoteproc/qcom_q6v5_wcss.c                |    2 +-
 drivers/remoteproc/qcom_wcnss.c                    |    2 +-
 drivers/remoteproc/remoteproc_core.c               |  161 ++-
 drivers/remoteproc/remoteproc_debugfs.c            |   16 +-
 drivers/remoteproc/remoteproc_elf_helpers.h        |   96 ++
 drivers/remoteproc/remoteproc_elf_loader.c         |  189 ++-
 drivers/remoteproc/remoteproc_internal.h           |   16 +-
 drivers/remoteproc/remoteproc_virtio.c             |    8 +
 drivers/remoteproc/st_remoteproc.c                 |    4 +-
 drivers/remoteproc/st_slim_rproc.c                 |    6 +-
 drivers/remoteproc/stm32_rproc.c                   |    4 +-
 drivers/remoteproc/wkup_m3_rproc.c                 |    4 +-
 include/linux/platform_data/remoteproc-omap.h      |   51 -
 include/linux/remoteproc.h                         |   16 +-
 27 files changed, 2080 insertions(+), 276 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
 create mode 100644 drivers/remoteproc/remoteproc_elf_helpers.h
 delete mode 100644 include/linux/platform_data/remoteproc-omap.h
merge bot Merged
#1 lore raw
The pull request you sent on Wed, 1 Apr 2020 18:08:12 -0700:

The pull request you sent on Wed, 1 Apr 2020 18:08:12 -0700:

Quoted 1 line

https://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc.git tags/rproc-v5.7

has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/c6570114316fbbce4ac5f970578adaf3cbf07ec3

Thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.wiki.kernel.org/userdoc/prtracker
#2 lore raw

PATCH 1/1 remoteproc/omap: Fix set_load call in omap_rproc_request_timer

In reply to Bjorn Andersson

When building arm allyesconfig:

drivers/remoteproc/omap_remoteproc.c:174:44: error: too many arguments to function call, expected 2, have 3

        timer->timer_ops->set_load(timer->odt, 0, 0);
        ~~~~~~~~~~~~~~~~~~~~~~~~~~                ^

1 error generated.

This is due to commit 02e6d546e3bd ("clocksource/drivers/timer-ti-dm:
Enable autoreload in set_pwm") in the clockevents tree interacting with commit e28edc571925 ("remoteproc/omap: Request a timer(s) for remoteproc usage") from the rpmsg tree.

This should have been fixed during the merge of the remoteproc tree since it happened after the clockevents tree merge; however, it does not look like my email was noticed by either maintainer and I did not pay attention when the pull was sent since I was on CC.

Fixes c6570114316f ("Merge tag 'rproc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc")
---
 drivers/remoteproc/omap_remoteproc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/remoteproc/omap_remoteproc.c +1 -1
index cdb546f7232e..6955fab0a78b 100644
@@ -171,7 +171,7 @@ static int omap_rproc_request_timer(struct device *dev, struct device_node *np,
 	}
 
 	/* clean counter, remoteproc code will set the value */
-	timer->timer_ops->set_load(timer->odt, 0, 0);
+	timer->timer_ops->set_load(timer->odt, 0);
 
 	return 0;
 }
Signature · 1 line
2.26.0
Acked-by on v1 1/1
#3 lore raw

Re: [PATCH] remoteproc/omap: Fix set_load call in omap_rproc_request_timer

Quoted 1 line · Nathan Chancellor

When building arm allyesconfig:

Thanks, Nathan. Also throws up with omap2plus_defconfig.

Quoted 12 lines

drivers/remoteproc/omap_remoteproc.c:174:44: error: too many arguments to function call, expected 2, have 3

        timer->timer_ops->set_load(timer->odt, 0, 0);
        ~~~~~~~~~~~~~~~~~~~~~~~~~~                ^

1 error generated.

This is due to commit 02e6d546e3bd ("clocksource/drivers/timer-ti-dm:
Enable autoreload in set_pwm") in the clockevents tree interacting with commit e28edc571925 ("remoteproc/omap: Request a timer(s) for remoteproc usage") from the rpmsg tree.

Quoted 8 lines

This should have been fixed during the merge of the remoteproc tree since it happened after the clockevents tree merge; however, it does not look like my email was noticed by either maintainer and I did not pay attention when the pull was sent since I was on CC.

Fixes c6570114316f ("Merge tag 'rproc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc")
Quoted 18 lines
---
 drivers/remoteproc/omap_remoteproc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/remoteproc/omap_remoteproc.c +1 -1
index cdb546f7232e..6955fab0a78b 100644
@@ -171,7 +171,7 @@ static int omap_rproc_request_timer(struct device *dev, struct device_node *np,
 	}
 
 	/* clean counter, remoteproc code will set the value */
-	timer->timer_ops->set_load(timer->odt, 0, 0);
+	timer->timer_ops->set_load(timer->odt, 0);
 
 	return 0;
 }
#4 lore raw

Re: [PATCH] remoteproc/omap: Fix set_load call in omap_rproc_request_timer

In reply to Nathan Chancellor
Quoted 10 lines · Nathan Chancellor

This is due to commit 02e6d546e3bd ("clocksource/drivers/timer-ti-dm:
Enable autoreload in set_pwm") in the clockevents tree interacting with commit e28edc571925 ("remoteproc/omap: Request a timer(s) for remoteproc usage") from the rpmsg tree.

This should have been fixed during the merge of the remoteproc tree since it happened after the clockevents tree merge; however, it does not look like my email was noticed by either maintainer and I did not pay attention when the pull was sent since I was on CC.

Thanks, I've taken this patch directly into my tree since it was my merge that screwed up.

Linus

#5 lore raw

Re: [PATCH] remoteproc/omap: Fix set_load call in omap_rproc_request_timer

Quoted 8 lines · Linus Torvalds
Quoted 6 lines · Nathan Chancellor

This is due to commit 02e6d546e3bd ("clocksource/drivers/timer-ti-dm:
Enable autoreload in set_pwm") in the clockevents tree interacting with commit e28edc571925 ("remoteproc/omap: Request a timer(s) for remoteproc usage") from the rpmsg tree.

Quoted 8 lines
Quoted 4 lines

This should have been fixed during the merge of the remoteproc tree since it happened after the clockevents tree merge; however, it does not look like my email was noticed by either maintainer and I did not pay attention when the pull was sent since I was on CC.

Thanks, I've taken this patch directly into my tree since it was my merge that screwed up.

Thanks Nathan, Suman and Linus.

#6 lore raw

Re: [PATCH] remoteproc/omap: Fix set_load call in omap_rproc_request_timer

In reply to Nathan Chancellor
This patch was applied to andersson/remoteproc.git (refs/heads/for-next).

Hello:

This patch was applied to andersson/remoteproc.git (refs/heads/for-next).

Quoted 9 lines · On Thu, 2 Apr 2020 18:31:35 -0700 you wrote:

When building arm allyesconfig:

drivers/remoteproc/omap_remoteproc.c:174:44: error: too many arguments to function call, expected 2, have 3

        timer->timer_ops->set_load(timer->odt, 0, 0);
        ~~~~~~~~~~~~~~~~~~~~~~~~~~                ^

1 error generated.

[...]

Here is a summary with links:
- remoteproc/omap: Fix set_load call in omap_rproc_request_timer

    https://git.kernel.org/andersson/remoteproc/c/e6d05acd57013114977ec77a131fe79d2f542774

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.wiki.kernel.org/userdoc/pwbot