brcmfmac: p2p fixes and the second connection support
cover brcmfmac: p2p fixes and the second connection support
This patch series addresses failures seen during p2p testing and adds the second p2p connection support.
Joseph Chuang (1):
brcmfmac: Fix P2P Group Formation failure via Go-neg method
Justin Li (1):
brcmfmac: Add P2P Action Frame retry delay to fix GAS Comeback
Response failure issue
Wright Feng (1):
brcmfmac: support the second p2p connection
.../net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 88 +++++++++++++++++++--- .../net/wireless/broadcom/brcm80211/brcmfmac/p2p.h | 9 ++- 2 files changed, 84 insertions(+), 13 deletions(-)
Signature · 1 line
2.1.0
PATCH 1/3 brcmfmac: support the second p2p connection
With RSDB feature, firmware is able to support two P2P-AGO or two P2P-GC at the same time. So we add the second p2p connection type to map to the second P2P connection bsscfg.
--- .../net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 56 ++++++++++++++++++---- .../net/wireless/broadcom/brcm80211/brcmfmac/p2p.h | 9 ++-- 2 files changed, 54 insertions(+), 11 deletions(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c +48 -8
@@ -17,6 +17,7 @@#include "fwil_types.h" #include "p2p.h" #include "cfg80211.h" +#include "feature.h" /* parameters used for p2p escan */ #define P2PAPI_SCAN_NPROBES 1
@@ -474,9 +475,13 @@ static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p, u8 *dev_addr)* BSSCFGs need to simultaneously co-exist, then this address must be * different from the P2P Device Address, but also locally administered. */ -memcpy (p2p->int_addr, p2p->dev_addr,ETH_ALEN ); - p2p->int_addr[0 ] |=0x02 ; - p2p->int_addr[4 ] ^=0x80 ; +memcpy (p2p->conn_int_addr, p2p->dev_addr,ETH_ALEN ); + p2p->conn_int_addr[0 ] |=0x02 ; + p2p->conn_int_addr[4 ] ^=0x80 ; + +memcpy (p2p->conn2_int_addr, p2p->dev_addr,ETH_ALEN ); + p2p->conn2_int_addr[0 ] |=0x02 ; + p2p->conn2_int_addr[4 ] ^=0x90 ; }/**
@@ -1994,7 +1999,7 @@ int brcmf_p2p_ifchange(struct brcmf_cfg80211_info *cfg, if_request.type =cpu_to_le16 ((u16 )if_type); if_request.chspec =cpu_to_le16 (chanspec); -memcpy (if_request.addr, p2p->int_addr,sizeof (if_request.addr)); +memcpy (if_request.addr, p2p->conn_int_addr,sizeof (if_request.addr));brcmf_cfg80211_arm_vif_event (cfg, vif); err = brcmf_fil_iovar_data_set(vif->ifp, "p2p_ifupd", &if_request,
@@ -2149,6 +2154,27 @@ static struct wireless_dev *brcmf_p2p_create_p2pdev(struct brcmf_p2p_info *p2p,return ERR_PTR (err); } +int brcmf_p2p_get_conn_idx (struct brcmf_cfg80211_info *cfg) +{ +int i; +struct brcmf_if *ifp =netdev_priv (cfg_to_ndev (cfg)); + +if (!ifp) +return -ENODEV ; + +for (i =P2PAPI_BSSCFG_CONNECTION ; i <P2PAPI_BSSCFG_MAX ; i++) { +if (!cfg->p2p.bss_idx[i].vif) { +if (i ==P2PAPI_BSSCFG_CONNECTION2 && + !(brcmf_feat_is_enabled (ifp,BRCMF_FEAT_RSDB ))) { +brcmf_err ("Multi p2p not supported" ); +return -EIO ; + } +return i; + } + } +return -EIO ; +} +/** * brcmf_p2p_add_vif() - create a new P2P virtual interface. *
@@ -2168,7 +2194,9 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name,struct brcmf_pub *drvr = cfg->pub;struct brcmf_cfg80211_vif *vif;enum brcmf_fil_p2p_if_types iftype; -int err; +int err =0 ; +int connidx; +u8 *p2p_intf_addr;if (brcmf_cfg80211_vif_event_armed (cfg))return ERR_PTR (-EBUSY );
@@ -2194,9 +2222,21 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name,return (struct wireless_dev *)vif;brcmf_cfg80211_arm_vif_event (cfg, vif); - err =brcmf_p2p_request_p2p_if (&cfg->p2p, ifp, cfg->p2p.int_addr, - iftype); + connidx =brcmf_p2p_get_conn_idx (cfg); + +if (connidx ==P2PAPI_BSSCFG_CONNECTION ) + p2p_intf_addr = cfg->p2p.conn_int_addr; +else if (connidx ==P2PAPI_BSSCFG_CONNECTION2 ) + p2p_intf_addr = cfg->p2p.conn2_int_addr; +else + err = -EINVAL ; + +if (!err) + err =brcmf_p2p_request_p2p_if (&cfg->p2p, ifp, + p2p_intf_addr, iftype); +if (err) { +brcmf_err ("request p2p interface failed\n" );brcmf_cfg80211_arm_vif_event (cfg,NULL ); goto fail; }
@@ -2228,7 +2268,7 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, goto fail; } - cfg->p2p.bss_idx[P2PAPI_BSSCFG_CONNECTION ].vif = vif; + cfg->p2p.bss_idx[connidx].vif = vif;/* Disable firmware roaming for P2P interface */ brcmf_fil_iovar_int_set (ifp,"roam_off" ,1 );if (iftype ==BRCMF_FIL_P2P_IF_GO ) {
drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h +6 -3
@@ -14,13 +14,15 @@ struct brcmf_cfg80211_info;* * @P2PAPI_BSSCFG_PRIMARY: maps to driver's primary bsscfg. * @P2PAPI_BSSCFG_DEVICE: maps to driver's P2P device discovery bsscfg. -* @P2PAPI_BSSCFG_CONNECTION: maps to driver's P2P connection bsscfg. +* @P2PAPI_BSSCFG_CONNECTION: maps to driver's 1st P2P connection bsscfg. +* @P2PAPI_BSSCFG_CONNECTION2: maps to driver's 2nd P2P connection bsscfg. * @P2PAPI_BSSCFG_MAX: used for range checking. */ enum p2p_bss_type {P2PAPI_BSSCFG_PRIMARY ,/* maps to driver's primary bsscfg */ P2PAPI_BSSCFG_DEVICE ,/* maps to driver's P2P device discovery bsscfg */ -P2PAPI_BSSCFG_CONNECTION ,/* maps to driver's P2P connection bsscfg */ +P2PAPI_BSSCFG_CONNECTION ,/* driver's 1st P2P connection bsscfg */ +P2PAPI_BSSCFG_CONNECTION2 ,/* driver's 2nd P2P connection bsscfg */ P2PAPI_BSSCFG_MAX };
@@ -119,7 +121,8 @@ struct brcmf_p2p_info {struct brcmf_cfg80211_info *cfg;unsigned long status;u8 dev_addr[ETH_ALEN ]; -u8 int_addr[ETH_ALEN ]; +u8 conn_int_addr[ETH_ALEN ]; +u8 conn2_int_addr[ETH_ALEN ];struct p2p_bss bss_idx[P2PAPI_BSSCFG_MAX ];struct timer_list listen_timer;u8 listen_channel;
Signature · 1 line
2.1.0
Re: [PATCH 1/3] brcmfmac: support the second p2p connection
Quoted 6 lines · Wright Feng
With RSDB feature, firmware is able to support two P2P-AGO or two P2P-GC at the same time. So we add the second p2p connection type to map to the second P2P connection bsscfg.
Signed-off-by Wright Feng <[email protected]>Signed-off-by Chi-hsien Lin <[email protected]>
3 patches applied to wireless-drivers-next.git, thanks.
babfd3caf356 brcmfmac: support the second p2p connection9c29da3f4e7e brcmfmac: Fix P2P Group Formation failure via Go-neg method 7f26cedfc9fd brcmfmac: Add P2P Action Frame retry delay to fix GAS Comeback Response failure issue
Signature · 3 lines
https://patchwork.kernel.org/patch/11525053/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
PATCH 2/3 brcmfmac: Fix P2P Group Formation failure via Go-neg method
In reply to Wright FengFrom: Joseph Chuang <[email protected]>
P2P group formation fails since either peer is not able to send go-neg confirm or dut is not able to send go-neg response. To fix this, retry limit should be increased and dwell time check should be added.
--- .../net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 28 ++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c +26 -2
@@ -60,7 +60,7 @@#define P2P_AF_MIN_DWELL_TIME 100#define P2P_AF_MED_DWELL_TIME 400#define P2P_AF_LONG_DWELL_TIME 1000 -#define P2P_AF_TX_MAX_RETRY 1 +#define P2P_AF_TX_MAX_RETRY 5#define P2P_AF_MAX_WAIT_TIME msecs_to_jiffies(2000)#define P2P_INVALID_CHANNEL -1#define P2P_CHANNEL_SYNC_RETRY 5
@@ -93,6 +93,9 @@#define P2PSD_ACTION_ID_GAS_CRESP 0x0d/* GAS Comback Response AF */ #define BRCMF_P2P_DISABLE_TIMEOUT msecs_to_jiffies(500) + +/* Mask for retry counter of custom dwell time */ +#define CUSTOM_RETRY_MASK 0xff000000/** * struct brcmf_p2p_disc_st_le - set discovery state in firmware. *
@@ -1645,6 +1648,17 @@ static s32 brcmf_p2p_pub_af_tx(struct brcmf_cfg80211_info *cfg,return err; } +static bool brcmf_p2p_check_dwell_overflow (s32 requested_dwell, +unsigned long dwell_jiffies) +{ +if ((requested_dwell &CUSTOM_RETRY_MASK ) && + (jiffies_to_msecs (jiffies - dwell_jiffies) > + (requested_dwell & ~CUSTOM_RETRY_MASK ))) { +brcmf_err ("Action frame TX retry time over dwell time!\n" ); +return true; + } +return false; +}/** * brcmf_p2p_send_action_frame() - send action frame . *
@@ -1669,6 +1683,10 @@ bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg,s32 tx_retry;s32 extra_listen_time;uint delta_ms; +unsigned long dwell_jiffies =0 ; +bool dwell_overflow = false; + +s32 requested_dwell = af_params->dwell_time; action_frame = &af_params->action_frame; action_frame_len =le16_to_cpu (action_frame->len);
@@ -1780,12 +1798,18 @@ bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg,/* update channel */ af_params->channel =cpu_to_le32 (afx_hdl->peer_chan); } + dwell_jiffies = jiffies; + dwell_overflow =brcmf_p2p_check_dwell_overflow (requested_dwell, + dwell_jiffies); tx_retry =0 ;while (!p2p->block_gon_req_tx && - (ack == false) && (tx_retry <P2P_AF_TX_MAX_RETRY )) { + (!ack) && (tx_retry <P2P_AF_TX_MAX_RETRY ) && + !dwell_overflow) { ack = !brcmf_p2p_tx_action_frame (p2p, af_params); tx_retry++; + dwell_overflow =brcmf_p2p_check_dwell_overflow (requested_dwell, + dwell_jiffies); }if (ack == false) { bphy_err(drvr, "Failed to send Action Frame(retry %d)\n",
Signature · 1 line
2.1.0
PATCH 3/3 brcmfmac: Add P2P Action Frame retry delay to fix GAS Comeback Response failure issue
In reply to Wright FengFrom: Justin Li <[email protected]>
It was observed that P2P Cert. 5.1.19: DEVUT responds to Service Discovery request failed due to DUT did not send GAS Comeback Response after receiving request from test bed P2P peer. To fix this issue, we need to add P2P Action Frame retry delay to enhance P2P connection under VSDB and noisy environment, since the peer can be in other channels under VSDB.
--- drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c +4 -0
@@ -66,6 +66,7 @@#define P2P_CHANNEL_SYNC_RETRY 5#define P2P_AF_FRM_SCAN_MAX_WAIT msecs_to_jiffies(450)#define P2P_DEFAULT_SLEEP_TIME_VSDB 200 +#define P2P_AF_RETRY_DELAY_TIME 40/* WiFi P2P Public Action Frame OUI Subtypes */ #define P2P_PAF_GON_REQ 0/* Group Owner Negotiation Req */
@@ -1806,6 +1807,9 @@ bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg,while (!p2p->block_gon_req_tx && (!ack) && (tx_retry <P2P_AF_TX_MAX_RETRY ) && !dwell_overflow) { +if (af_params->channel) +msleep (P2P_AF_RETRY_DELAY_TIME ); + ack = !brcmf_p2p_tx_action_frame (p2p, af_params); tx_retry++; dwell_overflow = brcmf_p2p_check_dwell_overflow(requested_dwell,
Signature · 1 line
2.1.0