Skip to contentSkip to conversation

PATCH In review [email protected] 1 participant 2 messages May 6, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Fix stm32f429's ltdc driver loading hang in ltdc clk enable. set clk_hw to the wrong offset of clks in stm32f4_rcc_register_pll, should be PLL_SAI

#1 lore raw

PATCH 4/4 clk: stm32f4: fix ltdc driver hang as clk set rate failed

From: dillon min <[email protected]>

should use PLL_SAI offset of clks , not PLL_VCO_SAI else can not get clk gate.

---
 drivers/clk/clk-stm32f4.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/clk/clk-stm32f4.c +4 -3
index 18117ce..bdebe05 100644
@@ -129,7 +129,8 @@ static const struct stm32f4_gate_data stm32f429_gates[] __initconst = {
 	{ STM32F4_RCC_APB2ENR, 20,	"spi5",		"apb2_div" },
 	{ STM32F4_RCC_APB2ENR, 21,	"spi6",		"apb2_div" },
 	{ STM32F4_RCC_APB2ENR, 22,	"sai1",		"apb2_div" },
-	{ STM32F4_RCC_APB2ENR, 26,	"ltdc",		"apb2_div" },
+	{ STM32F4_RCC_APB2ENR, 26,	"ltdc",		"apb2_div",
+		CLK_IGNORE_UNUSED },
 };
 
 static const struct stm32f4_gate_data stm32f469_gates[] __initconst = {
@@ -1754,10 +1755,10 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 	stm32f4_rcc_register_pll("vco_in", &data->pll_data[0],
 			&stm32f4_clk_lock);
 
-	clks[PLL_VCO_I2S] = stm32f4_rcc_register_pll("vco_in",
+	clks[PLL_I2S] = stm32f4_rcc_register_pll("vco_in",
 			&data->pll_data[1], &stm32f4_clk_lock);
 
-	clks[PLL_VCO_SAI] = stm32f4_rcc_register_pll("vco_in",
+	clks[PLL_SAI] = stm32f4_rcc_register_pll("vco_in",
 			&data->pll_data[2], &stm32f4_clk_lock);
 
 	for (n = 0; n < MAX_POST_DIV; n++) {
Signature · 1 line
2.7.4