Skip to contentSkip to conversation

Calculate SDRAM size for Actions OWL SoCs

PATCH Superseded Amit Singh Tomar 1 participant 3 messages May 9, 2020

Subsystems (3)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v3 cover Calculate SDRAM size for Actions OWL SoCs

Realized that sent the wrong version(v2) that has typos and didn't get compile for S900. Just fixed this in v3.

Sorry for the noise.
----------------------------------------------------------------------

This small series allows us to calculate SDRAM size instead of guessing it.

Patch (1/2) is re-worked to support S900 SoC along with S700.

These changes have been tested on S700 based Cubieboard7-lite board, and it would be great if this can be tested on S900.

Amit Singh Tomar (2):
Actions: OWL: Calculate SDRAM size
arm: actions: remove "CONFIG_SYS_SDRAM_SIZE" for Actions Owl Semi SoCs

 arch/arm/mach-owl/soc.c      | 27 ++++++++++++++++++++++++++-
 include/configs/owl-common.h |  1 -
 2 files changed, 26 insertions(+), 2 deletions(-)
Signature · 1 line
2.7.4
#1 lore raw

PATCH v3 1/2 Actions: OWL: Calculate SDRAM size

Calculate the SDRAM size from DDR capacity register registers instead of using hard-coded value. This is quite useful to get correct size on differnt boards based on Actions OWL family of SoCs (S700 and S900).

There is no documentation available that talks about DDR registers, and this is very much taken from vendor source.

This commit lets Linux boot on Cubieboard7-lite(based on S700).

---
Changes since v2:

	* Fixed the variable name so that it can compile
	  for S900.	

Changes since v1:
* added support for S900
* updated the commit message to reflect common OWL support.

---
 arch/arm/mach-owl/soc.c | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)
arch/arm/mach-owl/soc.c +26 -1
index 409cbd319f20..2b2b0226cdb2 100644
@@ -13,15 +13,40 @@
 #include <asm/mach-types.h>
 #include <asm/psci.h>
 
+#define DMM_INTERLEAVE_BASE             (0xe0290020)
+#define DMM_INTERLEAVE_PER_CH_CFG       (DMM_INTERLEAVE_BASE +  0x08)
+#define DMM_MASTER_READ_TO              (DMM_INTERLEAVE_BASE +  0x48)
+
 DECLARE_GLOBAL_DATA_PTR;
 
+unsigned int get_owl_ram_size(void)
+{
+	__maybe_unused unsigned int val, cap, channel, channel_num;
+
+	/* ddr capacity register initialized by ddr driver
+	 * in early bootloader
+	 */
+#if defined(CONFIG_MACH_S700)
+	val = (readl(DMM_INTERLEAVE_PER_CH_CFG) >> 8) & 0x7;
+	cap =  (val + 1) * 256;
+#elif defined(CONFIG_MACH_S900)
+	channel_num = (readl(DMM_INTERLEAVE_BASE) >> 24) & 0xf;
+	channel = (channel_num >= 3) ? 1 : 0;
+	val = (readl(DMM_MASTER_READ_TO)) & 0xf;
+	cap = ((val + 1) << channel) * 256;
+#endif
+
+	return cap;
+}
+
 /*
  * dram_init - sets uboots idea of sdram size
  */
 int dram_init(void)
 {
-	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+	gd->ram_size = get_owl_ram_size() * 1024 * 1024;
 	return 0;
+
 }
 
 /* This is called after dram_init() so use get_ram_size result */
Signature · 1 line
2.7.4
#2 lore raw

PATCH v3 2/2 arm: actions: remove "CONFIG_SYS_SDRAM_SIZE" for Actions Owl Semi SoCs

In reply to Amit Singh Tomar

Now that, we calculate SDRAM size by reading DDR registers, "CONFIG_SYS_SDRAM_SIZE" is no more needed.

This commit removes "CONFIG_SYS_SDRAM_SIZE" from common configuration file.

---
* No change from previous versions.

---
 include/configs/owl-common.h | 1 -
 1 file changed, 1 deletion(-)
include/configs/owl-common.h +0 -1
index f77a5fa4c114..7634578f856d 100644
@@ -12,7 +12,6 @@
 
 /* SDRAM Definitions */
 #define CONFIG_SYS_SDRAM_BASE		0x0
-#define CONFIG_SYS_SDRAM_SIZE		0x80000000
 
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY		(24000000)	/* 24MHz */
Signature · 1 line
2.7.4