ifcvf: move IRQ request/free to status change handlers
Subsystems (5)
PATCH v2 1/1 ifcvf: move IRQ request/free to status change handlers
This commit move IRQ request and free operations from probe() to VIRTIO status change handler to comply with VIRTIO spec.
VIRTIO spec 1.1, section 2.1.2 Device Requirements: Device Status Field The device MUST NOT consume buffers or send any used buffer notifications to the driver before DRIVER_OK.
---
changes from V1:
remove ifcvf_stop_datapath() in status == 0 handler, we don't need to do this twice; handle status == 0 after DRIVER_OK -> !DRIVER_OK handler (Jason Wang)
drivers/vdpa/ifcvf/ifcvf_main.c | 120 ++++++++++++++++++++++++---------------- 1 file changed, 73 insertions(+), 47 deletions(-)
drivers/vdpa/ifcvf/ifcvf_main.c +73 -47
@@ -28,6 +28,60 @@ static irqreturn_t ifcvf_intr_handler(int irq, void *arg)return IRQ_HANDLED ; } +static void ifcvf_free_irq_vectors (void *data) +{ +pci_free_irq_vectors (data); +} + +static void ifcvf_free_irq (struct ifcvf_adapter *adapter,int queues) +{ +struct pci_dev *pdev = adapter->pdev; +struct ifcvf_hw *vf = &adapter->vf; +int i; + + +for (i =0 ; i < queues; i++) +devm_free_irq (&pdev->dev, vf->vring[i].irq, &vf->vring[i]); + +ifcvf_free_irq_vectors (pdev); +} + +static int ifcvf_request_irq (struct ifcvf_adapter *adapter) +{ +struct pci_dev *pdev = adapter->pdev; +struct ifcvf_hw *vf = &adapter->vf; +int vector, i, ret, irq; + + ret =pci_alloc_irq_vectors (pdev,IFCVF_MAX_INTR , +IFCVF_MAX_INTR ,PCI_IRQ_MSIX ); +if (ret <0 ) { +IFCVF_ERR (pdev,"Failed to alloc IRQ vectors\n" ); +return ret; + } + +for (i =0 ; i <IFCVF_MAX_QUEUE_PAIRS *2 ; i++) { +snprintf (vf->vring[i].msix_name,256 ,"ifcvf[%s]-%d\n" , +pci_name (pdev), i); + vector = i +IFCVF_MSI_QUEUE_OFF ; + irq =pci_irq_vector (pdev, vector); + ret =devm_request_irq (&pdev->dev, irq, + ifcvf_intr_handler,0 , + vf->vring[i].msix_name, + &vf->vring[i]); +if (ret) { +IFCVF_ERR (pdev, +"Failed to request irq for vq %d\n" , i); +ifcvf_free_irq (adapter, i); + +return ret; + } + + vf->vring[i].irq = irq; + } + +return 0 ; +} +static int ifcvf_start_datapath (void *private) {struct ifcvf_hw *vf =ifcvf_private_to_vf (private);
@@ -118,17 +172,34 @@ static void ifcvf_vdpa_set_status(struct vdpa_device *vdpa_dev, u8 status) {struct ifcvf_adapter *adapter;struct ifcvf_hw *vf; +u8 status_old; +int ret; vf =vdpa_to_vf (vdpa_dev); adapter =dev_get_drvdata (vdpa_dev->dev.parent); + status_old =ifcvf_get_status (vf); -if (status ==0 ) { +if ((status_old &VIRTIO_CONFIG_S_DRIVER_OK ) && + !(status &VIRTIO_CONFIG_S_DRIVER_OK )) {ifcvf_stop_datapath (adapter); +ifcvf_free_irq (adapter,IFCVF_MAX_QUEUE_PAIRS *2 ); + } + +if (status ==0 ) {ifcvf_reset_vring (adapter);return ; } -if (status &VIRTIO_CONFIG_S_DRIVER_OK ) { +if ((status &VIRTIO_CONFIG_S_DRIVER_OK ) && + !(status_old &VIRTIO_CONFIG_S_DRIVER_OK )) { + ret =ifcvf_request_irq (adapter); +if (ret) { + status =ifcvf_get_status (vf); + status |=VIRTIO_CONFIG_S_FAILED ; +ifcvf_set_status (vf, status); +return ; + } +if (ifcvf_start_datapath (adapter) <0 ) IFCVF_ERR(adapter->pdev, "Failed to set ifcvf vdpa status %u\n",
@@ -284,38 +355,6 @@ static void ifcvf_vdpa_set_config_cb(struct vdpa_device *vdpa_dev, .set_config_cb = ifcvf_vdpa_set_config_cb, }; -static int ifcvf_request_irq (struct ifcvf_adapter *adapter) -{ -struct pci_dev *pdev = adapter->pdev; -struct ifcvf_hw *vf = &adapter->vf; -int vector, i, ret, irq; - - -for (i =0 ; i <IFCVF_MAX_QUEUE_PAIRS *2 ; i++) { -snprintf (vf->vring[i].msix_name,256 ,"ifcvf[%s]-%d\n" , -pci_name (pdev), i); - vector = i +IFCVF_MSI_QUEUE_OFF ; - irq =pci_irq_vector (pdev, vector); - ret =devm_request_irq (&pdev->dev, irq, - ifcvf_intr_handler,0 , - vf->vring[i].msix_name, - &vf->vring[i]); -if (ret) { -IFCVF_ERR (pdev, -"Failed to request irq for vq %d\n" , i); -return ret; - } - vf->vring[i].irq = irq; - } - -return 0 ; -} - -static void ifcvf_free_irq_vectors (void *data) -{ -pci_free_irq_vectors (data); -} -static int ifcvf_probe (struct pci_dev *pdev,const struct pci_device_id *id) {struct device *dev = &pdev->dev;
@@ -349,13 +388,6 @@ static int ifcvf_probe(struct pci_dev *pdev, const struct pci_device_id *id)return ret; } - ret =pci_alloc_irq_vectors (pdev,IFCVF_MAX_INTR , -IFCVF_MAX_INTR ,PCI_IRQ_MSIX ); -if (ret <0 ) { -IFCVF_ERR (pdev,"Failed to alloc irq vectors\n" ); -return ret; - } - ret =devm_add_action_or_reset (dev, ifcvf_free_irq_vectors, pdev);if (ret) { IFCVF_ERR(pdev,
@@ -379,12 +411,6 @@ static int ifcvf_probe(struct pci_dev *pdev, const struct pci_device_id *id) adapter->pdev = pdev; adapter->vdpa.dma_dev = &pdev->dev; - ret =ifcvf_request_irq (adapter); -if (ret) { -IFCVF_ERR (pdev,"Failed to request MSI-X irq\n" ); - goto err; - } - ret =ifcvf_init_hw (vf, pdev);if (ret) {IFCVF_ERR (pdev,"Failed to init IFCVF hw\n" );
Signature · 1 line
1.8.3.1
Quoted 6 lines · Zhu Lingshan
This commit move IRQ request and free operations from
probe()to VIRTIO status change handler to comply with VIRTIO spec.VIRTIO spec 1.1, section 2.1.2 Device Requirements: Device Status Field The device MUST NOT consume buffers or send any used buffer notifications to the driver before
DRIVER_OK.
This comment needs to be checked as I said previously. It's only needed if we're sure ifcvf can generate interrupt before DRIVER_OK.
Quoted 6 lines
Signed-off-by Zhu Lingshan <[email protected]>---
changes from V1:
removeifcvf_stop_datapath()in status == 0 handler, we don't need to do this twice; handle status == 0 afterDRIVER_OK-> !DRIVER_OK handler (Jason Wang)
Patch looks good to me, but with this patch ping cannot work on my machine. (It works without this patch).
Thanks
Quoted 172 lines
drivers/vdpa/ifcvf/ifcvf_main.c | 120 ++++++++++++++++++++++++---------------- 1 file changed, 73 insertions(+), 47 deletions(-)drivers/vdpa/ifcvf/ifcvf_main.c +73
-47@@ -28,6 +28,60 @@ static irqreturn_t ifcvf_intr_handler(int irq, void *arg)return IRQ_HANDLED ; } +static void ifcvf_free_irq_vectors (void *data) +{ +pci_free_irq_vectors (data); +} + +static void ifcvf_free_irq (struct ifcvf_adapter *adapter,int queues) +{ +struct pci_dev *pdev = adapter->pdev; +struct ifcvf_hw *vf = &adapter->vf; +int i; + + +for (i =0 ; i < queues; i++) +devm_free_irq (&pdev->dev, vf->vring[i].irq, &vf->vring[i]); + +ifcvf_free_irq_vectors (pdev); +} + +static int ifcvf_request_irq (struct ifcvf_adapter *adapter) +{ +struct pci_dev *pdev = adapter->pdev; +struct ifcvf_hw *vf = &adapter->vf; +int vector, i, ret, irq; + + ret =pci_alloc_irq_vectors (pdev,IFCVF_MAX_INTR , +IFCVF_MAX_INTR ,PCI_IRQ_MSIX ); +if (ret <0 ) { +IFCVF_ERR (pdev,"Failed to alloc IRQ vectors\n" ); +return ret; + } + +for (i =0 ; i <IFCVF_MAX_QUEUE_PAIRS *2 ; i++) { +snprintf (vf->vring[i].msix_name,256 ,"ifcvf[%s]-%d\n" , +pci_name (pdev), i); + vector = i +IFCVF_MSI_QUEUE_OFF ; + irq =pci_irq_vector (pdev, vector); + ret =devm_request_irq (&pdev->dev, irq, + ifcvf_intr_handler,0 , + vf->vring[i].msix_name, + &vf->vring[i]); +if (ret) { +IFCVF_ERR (pdev, +"Failed to request irq for vq %d\n" , i); +ifcvf_free_irq (adapter, i); + +return ret; + } + + vf->vring[i].irq = irq; + } + +return 0 ; +} +static int ifcvf_start_datapath (void *private) {struct ifcvf_hw *vf =ifcvf_private_to_vf (private);@@ -118,17 +172,34 @@ static void ifcvf_vdpa_set_status(struct vdpa_device *vdpa_dev, u8 status) {struct ifcvf_adapter *adapter;struct ifcvf_hw *vf; +u8 status_old; +int ret; vf =vdpa_to_vf (vdpa_dev); adapter =dev_get_drvdata (vdpa_dev->dev.parent); + status_old =ifcvf_get_status (vf); -if (status ==0 ) { +if ((status_old &VIRTIO_CONFIG_S_DRIVER_OK ) && + !(status &VIRTIO_CONFIG_S_DRIVER_OK )) {ifcvf_stop_datapath (adapter); +ifcvf_free_irq (adapter,IFCVF_MAX_QUEUE_PAIRS *2 ); + } + +if (status ==0 ) {ifcvf_reset_vring (adapter);return ; } -if (status &VIRTIO_CONFIG_S_DRIVER_OK ) { +if ((status &VIRTIO_CONFIG_S_DRIVER_OK ) && + !(status_old &VIRTIO_CONFIG_S_DRIVER_OK )) { + ret =ifcvf_request_irq (adapter); +if (ret) { + status =ifcvf_get_status (vf); + status |=VIRTIO_CONFIG_S_FAILED ; +ifcvf_set_status (vf, status); +return ; + } +if (ifcvf_start_datapath (adapter) <0 ) IFCVF_ERR(adapter->pdev, "Failed to set ifcvf vdpa status %u\n",@@ -284,38 +355,6 @@ static void ifcvf_vdpa_set_config_cb(struct vdpa_device *vdpa_dev, .set_config_cb = ifcvf_vdpa_set_config_cb, }; -static int ifcvf_request_irq (struct ifcvf_adapter *adapter) -{ -struct pci_dev *pdev = adapter->pdev; -struct ifcvf_hw *vf = &adapter->vf; -int vector, i, ret, irq; - - -for (i =0 ; i <IFCVF_MAX_QUEUE_PAIRS *2 ; i++) { -snprintf (vf->vring[i].msix_name,256 ,"ifcvf[%s]-%d\n" , -pci_name (pdev), i); - vector = i +IFCVF_MSI_QUEUE_OFF ; - irq =pci_irq_vector (pdev, vector); - ret =devm_request_irq (&pdev->dev, irq, - ifcvf_intr_handler,0 , - vf->vring[i].msix_name, - &vf->vring[i]); -if (ret) { -IFCVF_ERR (pdev, -"Failed to request irq for vq %d\n" , i); -return ret; - } - vf->vring[i].irq = irq; - } - -return 0 ; -} - -static void ifcvf_free_irq_vectors (void *data) -{ -pci_free_irq_vectors (data); -} -static int ifcvf_probe (struct pci_dev *pdev,const struct pci_device_id *id) {struct device *dev = &pdev->dev;@@ -349,13 +388,6 @@ static int ifcvf_probe(struct pci_dev *pdev, const struct pci_device_id *id)return ret; } - ret =pci_alloc_irq_vectors (pdev,IFCVF_MAX_INTR , -IFCVF_MAX_INTR ,PCI_IRQ_MSIX ); -if (ret <0 ) { -IFCVF_ERR (pdev,"Failed to alloc irq vectors\n" ); -return ret; - } - ret =devm_add_action_or_reset (dev, ifcvf_free_irq_vectors, pdev);if (ret) { IFCVF_ERR(pdev,@@ -379,12 +411,6 @@ static int ifcvf_probe(struct pci_dev *pdev, const struct pci_device_id *id) adapter->pdev = pdev; adapter->vdpa.dma_dev = &pdev->dev; - ret =ifcvf_request_irq (adapter); -if (ret) { -IFCVF_ERR (pdev,"Failed to request MSI-X irq\n" ); - goto err; - } - ret =ifcvf_init_hw (vf, pdev);if (ret) {IFCVF_ERR (pdev,"Failed to init IFCVF hw\n" );
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 24 lines · Lingshan
Quoted 21 lines · Jason Wang
Quoted 6 lines · Zhu Lingshan
This commit move IRQ request and free operations from
probe()to VIRTIO status change handler to comply with VIRTIO spec.VIRTIO spec 1.1, section 2.1.2 Device Requirements: Device Status Field The device MUST NOT consume buffers or send any used buffer notifications to the driver before
DRIVER_OK.This comment needs to be checked as I said previously. It's only needed if we're sure ifcvf can generate interrupt before
DRIVER_OK.Quoted 6 lines
Signed-off-by Zhu Lingshan <[email protected]>---
changes from V1:
removeifcvf_stop_datapath()in status == 0 handler, we don't need to do this twice; handle status == 0 afterDRIVER_OK-> !DRIVER_OK handler (Jason Wang)
Quoted 8 lines
Quoted 3 lines
Patch looks good to me, but with this patch ping cannot work on my machine. (It works without this patch).
Thanks
This is strange, it works on my machines, let's have a check offline.
Thanks,
BR
Zhu Lingshan
Note that I tested the patch with vhost-vpda.
Thanks.
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Quoted 24 lines · Lingshan
Quoted 21 lines · Jason Wang
Quoted 6 lines · Zhu Lingshan
This commit move IRQ request and free operations from
probe()to VIRTIO status change handler to comply with VIRTIO spec.VIRTIO spec 1.1, section 2.1.2 Device Requirements: Device Status Field The device MUST NOT consume buffers or send any used buffer notifications to the driver before
DRIVER_OK.This comment needs to be checked as I said previously. It's only needed if we're sure ifcvf can generate interrupt before
DRIVER_OK.Quoted 6 lines
Signed-off-by Zhu Lingshan <[email protected]>---
changes from V1:
removeifcvf_stop_datapath()in status == 0 handler, we don't need to do this twice; handle status == 0 afterDRIVER_OK-> !DRIVER_OK handler (Jason Wang)
Quoted 8 lines
Quoted 3 lines
Patch looks good to me, but with this patch ping cannot work on my machine. (It works without this patch).
Thanks
This is strange, it works on my machines, let's have a check offline.
Thanks,
BR
Zhu Lingshan
I give it a try with virito-vpda and a tiny userspace. Either works.
So it could be an issue of qemu codes.
Let's wait for Cindy to test if it really works.
Thanks
Hi ,Jason
It works ok in the latest version of qemu vdpa code , So I think the patch is ok.
Thanks
Cindy
Quoted 50 lines · Jason Wang
Quoted 30 lines · Lingshan
Quoted 27 lines · Jason Wang
Quoted 6 lines · Zhu Lingshan
This commit move IRQ request and free operations from
probe()to VIRTIO status change handler to comply with VIRTIO spec.VIRTIO spec 1.1, section 2.1.2 Device Requirements: Device Status Field The device MUST NOT consume buffers or send any used buffer notifications to the driver before
DRIVER_OK.This comment needs to be checked as I said previously. It's only needed if we're sure ifcvf can generate interrupt before
DRIVER_OK.Quoted 8 lines
Signed-off-by Zhu Lingshan <[email protected]>---
changes from V1:
removeifcvf_stop_datapath()in status == 0 handler, we don't need to do this
twice; handle status == 0 afterDRIVER_OK-> !DRIVER_OK handler (Jason Wang)Patch looks good to me, but with this patch ping cannot work on my machine. (It works without this patch).
Quoted 6 lines
Quoted 1 line
Thanks
This is strange, it works on my machines, let's have a check offline.
Thanks,
BR
Zhu LingshanI give it a try with virito-vpda and a tiny userspace. Either works.
So it could be an issue of qemu codes.
Let's wait for Cindy to test if it really works.
Thanks
Jason Wang
Acked-byQuoted 5 lines · Cindy Lu
Hi ,Jason
It works ok in the latest version of qemu vdpa code , So I think the patch is ok.
Thanks
Cindy
Thanks for the testing, (btw, we'd better not do top posting when discuss in the community).
So,
Quoted 44 lines · Jason Wang
Quoted 43 lines · Lingshan
Quoted 25 lines · Jason Wang
Quoted 23 lines · Zhu Lingshan
Quoted 6 lines
This commit move IRQ request and free operations from
probe()to VIRTIO status change handler to comply with VIRTIO spec.VIRTIO spec 1.1, section 2.1.2 Device Requirements: Device Status Field The device MUST NOT consume buffers or send any used buffer notifications to the driver before
DRIVER_OK.This comment needs to be checked as I said previously. It's only needed if we're sure ifcvf can generate interrupt before
DRIVER_OK.Quoted 7 lines
Signed-off-by Zhu Lingshan <[email protected]>---
changes from V1:
removeifcvf_stop_datapath()in status == 0 handler, we don't need to do this
twice; handle status == 0 afterDRIVER_OK-> !DRIVER_OK handler (Jason Wang)Patch looks good to me, but with this patch ping cannot work on my machine. (It works without this patch).
Quoted 6 lines
Quoted 1 line
Thanks
This is strange, it works on my machines, let's have a check offline.
Thanks,
BR
Zhu LingshanI give it a try with virito-vpda and a tiny userspace. Either works.
So it could be an issue of qemu codes.
Let's wait for Cindy to test if it really works.
Thanks