s390x: css: pong, channel subsystem test device
v3 cover s390x: css: pong, channel subsystem test device
This patch series presents a device to test the channel subsystem.
Currently the pong device does the following:
- on PONG_WRITE requests:
read the CCW buffer, expect a string with an integer in the buffer. store the integer in a variable initialy initialized to zero.
- on PONG_READ requests:
Store the value of the variable + 1 as a string in a buffer send back the buffer
- defines a Control Unit property of type CCW_PONG_CU_TYPE for the guest to recognize the PONG device when using a SENSE_ID command.
Pierre Morel (1):
s390x: css: pong, channel subsystem test device
default-configs/s390x-softmmu.mak | 1 + hw/s390x/Kconfig | 3 + hw/s390x/Makefile.objs | 1 + hw/s390x/ccw-pong.c | 134 ++++++++++++++++++++++++++++++ include/hw/s390x/pong.h | 48 +++++++++++ 5 files changed, 187 insertions(+) create mode 100644 hw/s390x/ccw-pong.c create mode 100644 include/hw/s390x/pong.h
Signature · 17 lines
2.25.1 Changelog: from v2 to v3 - rebase to devel - use device_class_set_props() from v1 to v2 - use ccw_dstream_xxx_buf (Connie) - adding a cu_type property - testing the ccw.count - conditional compiling for TEST_DEVICES (Connie, Thomas) - suppress the device categorie (Connie ?) - adding write callback and some funny protocol
PATCH v3 1/1 s390x: css: pong, channel subsystem test device
This is a test device for channel subsystem.
Most of the CSS instructions are handled by the common code.
The PONG_READ and PONG_WRITE CCW commands allow to test the SSCH instruction with both read and write commands.
It is also possible to define the Control Unit type with the cu_type property.
Currently only the kvm-unit-test css test uses the PONG device.
--- default-configs/s390x-softmmu.mak | 1 + hw/s390x/Kconfig | 3 + hw/s390x/Makefile.objs | 1 + hw/s390x/ccw-pong.c | 134 ++++++++++++++++++++++++++++++ include/hw/s390x/pong.h | 48 +++++++++++ 5 files changed, 187 insertions(+) create mode 100644 hw/s390x/ccw-pong.c create mode 100644 include/hw/s390x/pong.h
default-configs/s390x-softmmu.mak +1 -0
@@ -7,6 +7,7 @@ #CONFIG_VFIO_CCW=n #CONFIG_VIRTIO_PCI=n #CONFIG_WDT_DIAG288=n +#CONFIG_CCW_TESTDEV=n # Boards: #
hw/s390x/Kconfig +3 -0
@@ -10,3 +10,6 @@ config S390_CCW_VIRTIO select SCLPCONSOLE select VIRTIO_CCW select MSI_NONBROKEN + +config CCW_TESTDEV + default y if TEST_DEVICES
hw/s390x/Makefile.objs +1 -0
@@ -35,3 +35,4 @@ obj-$(CONFIG_KVM) += pv.o obj-y += s390-ccw.o obj-y += ap-device.o obj-y += ap-bridge.o +obj-y += ccw-pong.o
hw/s390x/ccw-pong.c new file +134 -0
134 lines not on this page · raw message
include/hw/s390x/pong.h new file +48 -0
48 lines not on this page · raw message
Signature · 1 line
2.25.1