ARM: dts: imx: imx6qdl-gw: add Gateworks System Controller
Subsystems (2)
PATCH 1/1 ARM: dts: imx: imx6qdl-gw: add Gateworks System Controller
Add Gateworks System Controller support to Gateworks Ventana boards:
- add dt bindings for GSC mfd driver and hwmon driver for ADC's and fan controllers.
- add dt bindings for gpio-keys driver for push-button and interrupt events from the GSC.
--- arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 152 +++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 158 ++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 164 +++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 166 ++++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 146 ++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 152 +++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 140 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 164 +++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 139 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 140 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 141 ++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 159 +++++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 146 +++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 152 ++++++++++++++++++++++++++++++- 14 files changed, 2062 insertions(+), 57 deletions(-)
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +145 -7
@@ -19,6 +19,53 @@ bootargs = "console=ttymxc1,115200"; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <256>; /* BTN_0 */ + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <257>; /* BTN_1 */ + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <258>; /* BTN_2 */ + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <259>; /* BTN_3 */ + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <260>; /* BTN_4 */ + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <261>; /* BTN_5 */ + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";
@@ -102,6 +149,103 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>;
@@ -126,13 +270,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>;
@@ -387,6 +524,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */ >; };
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +151 -7
182 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +157 -7
188 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +159 -7
190 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw551x.dtsi +139 -7
170 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw552x.dtsi +145 -7
176 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw553x.dtsi +139 -1
162 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw560x.dtsi +157 -7
188 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5903.dtsi +138 -1
155 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5904.dtsi +139 -1
162 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5907.dtsi +139 -2
163 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5910.dtsi +158 -1
175 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5912.dtsi +145 -1
162 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5913.dtsi +151 -1
168 lines not on this page · raw message
Signature · 7 lines
2.7.4 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 29 lines · Tim Harvey
Add Gateworks System Controller support to Gateworks Ventana boards:
- add dt bindings for GSC mfd driver and hwmon driver for ADC's and fan controllers.
- add dt bindings for gpio-keys driver for push-button and interrupt events from the GSC.Signed-off-by Tim Harvey <[email protected]>--- arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 152 +++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 158 ++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 164 +++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 166 ++++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 146 ++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 152 +++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 140 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 164 +++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 139 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 140 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 141 ++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 159 +++++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 146 +++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 152 ++++++++++++++++++++++++++++++- 14 files changed, 2062 insertions(+), 57 deletions(-)arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +0
-0
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi line 27
Quoted 9 lines
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +6
-0@@ -19,6 +19,53 @@ bootargs = "console=ttymxc1,115200"; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb {
We recommend to use hyphen than underscore in name name.
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi line 30
Quoted 3 lines
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +3
-0+ label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <256>; /* BTN_0 */
Use defines from include/dt-bindings/input/linux-event-codes.h, you can drop the comments then.
Shawn
Quoted 2,504 lines
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +136
-7+ }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <257>; /* BTN_1 */ + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <258>; /* BTN_2 */ + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <259>; /* BTN_3 */ + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <260>; /* BTN_4 */ + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <261>; /* BTN_5 */ + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -102,6 +149,103 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>;@@ -126,13 +270,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>;@@ -387,6 +524,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */ >; };arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +151
-7@@ -28,6 +28,53 @@ default-brightness-level = <7>; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <256>; /* BTN_0 */ + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <257>; /* BTN_1 */ + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <258>; /* BTN_2 */ + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <259>; /* BTN_3 */ + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <260>; /* BTN_4 */ + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <261>; /* BTN_5 */ + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -165,6 +212,109 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + + channel@29 { + gw,mode = <1>; + reg = <0x29>; + label = "vdd_an1"; + }; + }; + }; + + gsc_gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>;@@ -189,13 +339,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>;@@ -504,6 +647,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; };arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +157
-7@@ -28,6 +28,53 @@ default-brightness-level = <7>; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <256>; /* BTN_0 */ + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <257>; /* BTN_1 */ + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <258>; /* BTN_2 */ + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <259>; /* BTN_3 */ + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <260>; /* BTN_4 */ + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <261>; /* BTN_5 */ + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -158,6 +205,115 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + + channel@26 { + gw,mode = <1>; + reg = <0x26>; + label = "vdd_gps"; + }; + + channel@29 { + gw,mode = <1>; + reg = <0x29>; + label = "vdd_an1"; + }; + }; + }; + + gsc_gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>;@@ -182,13 +338,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>;@@ -486,6 +635,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; };arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +159
-7@@ -29,6 +29,53 @@ default-brightness-level = <7>; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <256>; /* BTN_0 */ + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <257>; /* BTN_1 */ + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <258>; /* BTN_2 */ + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <259>; /* BTN_3 */ + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <260>; /* BTN_4 */ + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <261>; /* BTN_5 */ + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -195,6 +242,117 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + + channel@26 { + gw,mode = <1>; + reg = <0x26>; + label = "vdd_gps"; + }; + }; + + fan-controller@2c { + compatible = "gw,gsc-fan"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2c>; + }; + }; + + gsc_gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>;@@ -219,13 +377,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>;@@ -571,6 +722,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; };arch/arm/boot/dts/imx6qdl-gw551x.dtsi +139
-7@@ -63,6 +63,53 @@ bootargs = "console=ttymxc1,115200"; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <256>; /* BTN_0 */ + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <257>; /* BTN_1 */ + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <258>; /* BTN_2 */ + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <259>; /* BTN_3 */ + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <260>; /* BTN_4 */ + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <261>; /* BTN_5 */ + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -167,6 +214,97 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8a"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0b"; + }; + }; + }; + + gsc_gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>;@@ -191,13 +329,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>;@@ -464,6 +595,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; };arch/arm/boot/dts/imx6qdl-gw552x.dtsi +145
-7@@ -20,6 +20,53 @@ bootargs = "console=ttymxc1,115200"; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <256>; /* BTN_0 */ + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <257>; /* BTN_1 */ + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <258>; /* BTN_2 */ + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <259>; /* BTN_3 */ + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <260>; /* BTN_4 */ + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <261>; /* BTN_5 */ + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -92,6 +139,103 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>;@@ -116,13 +260,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>;@@ -305,6 +442,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; };arch/arm/boot/dts/imx6qdl-gw553x.dtsi +139
-1@@ -61,6 +61,53 @@ stdout-path = &uart2; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <256>; /* BTN_0 */ + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <257>; /* BTN_1 */ + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <258>; /* BTN_2 */ + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <259>; /* BTN_3 */ + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <260>; /* BTN_4 */ + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <261>; /* BTN_5 */ + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -130,11 +177,101 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio: pca9555@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8a"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0b"; + }; + + channel@26 { + gw,mode = <1>; + reg = <0x26>; + label = "vdd_an1"; + }; + }; + }; + + gsc_gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom1: eeprom@50 {@@ -428,6 +565,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; };arch/arm/boot/dts/imx6qdl-gw560x.dtsi +157
-7@@ -88,6 +88,53 @@ default-on; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <256>; /* BTN_0 */ + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <257>; /* BTN_1 */ + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <258>; /* BTN_2 */ + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <259>; /* BTN_3 */ + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <260>; /* BTN_4 */ + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <261>; /* BTN_5 */ + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -243,6 +290,115 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + + channel@26 { + gw,mode = <1>; + reg = <0x26>; + label = "vdd_gps"; + }; + + channel@29 { + gw,mode = <1>; + reg = <0x29>; + label = "vdd_an2"; + }; + }; + }; + + gsc_gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>;@@ -267,13 +423,6 @@ pagesize = <16>; }; - pca9555: gpio@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - ds1672: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>;@@ -608,6 +757,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; };arch/arm/boot/dts/imx6qdl-gw5903.dtsi +138
-1@@ -71,6 +71,53 @@ default-brightness-level = <100>; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <256>; /* BTN_0 */ + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <257>; /* BTN_1 */ + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <258>; /* BTN_2 */ + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <259>; /* BTN_3 */ + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <260>; /* BTN_4 */ + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <261>; /* BTN_5 */ + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -183,11 +230,101 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pca9555: gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom1: eeprom@50 {arch/arm/boot/dts/imx6qdl-gw5904.dtsi +139
-1@@ -68,6 +68,53 @@ default-brightness-level = <7>; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <256>; /* BTN_0 */ + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <257>; /* BTN_1 */ + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <258>; /* BTN_2 */ + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <259>; /* BTN_3 */ + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <260>; /* BTN_4 */ + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <261>; /* BTN_5 */ + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -205,11 +252,101 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pca9555: gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom1: eeprom@50 {@@ -503,6 +640,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */ >; };arch/arm/boot/dts/imx6qdl-gw5907.dtsi +139
-2@@ -19,6 +19,53 @@ stdout-path = &uart2; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <256>; /* BTN_0 */ + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <257>; /* BTN_1 */ + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <258>; /* BTN_2 */ + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <259>; /* BTN_3 */ + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <260>; /* BTN_4 */ + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <261>; /* BTN_5 */ + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -102,11 +149,101 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom@50 {@@ -133,7 +270,7 @@ pagesize = <16>; }; - rtc@68 { + ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; };arch/arm/boot/dts/imx6qdl-gw5910.dtsi +158
-1@@ -22,6 +22,53 @@ reg = <0x10000000 0x20000000>; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <256>; /* BTN_0 */ + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <257>; /* BTN_1 */ + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <258>; /* BTN_2 */ + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <259>; /* BTN_3 */ + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <260>; /* BTN_4 */ + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <261>; /* BTN_5 */ + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -111,11 +158,121 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vdd_vin"; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <800000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vdd_5p0"; + gw,voltage-divider-ohms = <22100 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_3p0"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_arm"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_soc"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_1p5"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_1p8"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_1p0"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@9c { + gw,mode = <2>; + reg = <0x9c>; + label = "vdd_an1"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gsc_gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom@50 {arch/arm/boot/dts/imx6qdl-gw5912.dtsi +145
-1@@ -20,6 +20,53 @@ stdout-path = &uart2; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <256>; /* BTN_0 */ + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <257>; /* BTN_1 */ + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <258>; /* BTN_2 */ + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <259>; /* BTN_3 */ + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <260>; /* BTN_4 */ + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <261>; /* BTN_5 */ + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -106,11 +153,108 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + + fan-controller@a { + #address-cells = <1>; + #size-cells = <0>; + compatible = "gw,gsc-fan"; + reg = <0x0a>; + }; + }; + + gsc_gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom@50 {arch/arm/boot/dts/imx6qdl-gw5913.dtsi +151
-1@@ -19,6 +19,53 @@ stdout-path = &uart2; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <256>; /* BTN_0 */ + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <257>; /* BTN_1 */ + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <258>; /* BTN_2 */ + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <259>; /* BTN_3 */ + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <260>; /* BTN_4 */ + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <261>; /* BTN_5 */ + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -87,11 +134,114 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vdd_vin"; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <800000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vdd_5p0"; + gw,voltage-divider-ohms = <22100 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_arm"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_soc"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_1p5"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_1p0"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_3p0"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_an1"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gsc_gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom@50 {Signature · 1 line
2.7.4
PATCH v2 1/1 ARM: dts: imx6qdl-gw: add Gateworks System Controller support
In reply to Tim HarveyAdd Gateworks System Controller support to Gateworks Ventana boards:
- add dt bindings for GSC mfd driver and hwmon driver for ADC's and fan controllers.
- add dt bindings for gpio-keys driver for push-button and interrupt events
---
v2:
- use keycode bindings from linux-event-codes.h
- fix gw5910/gw5913 vdd_bat ADC mode (these boards use 16bit pre-scaled ADC)
--- arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 153 +++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 159 ++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 165 +++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 167 ++++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 147 ++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 153 +++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 141 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 164 +++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 140 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 141 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 142 ++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 160 +++++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 147 +++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 153 ++++++++++++++++++++++++++++++- 14 files changed, 2075 insertions(+), 57 deletions(-)
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +146 -7
@@ -4,6 +4,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> / { /* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@ bootargs = "console=ttymxc1,115200"; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";
@@ -102,6 +150,103 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>;
@@ -126,13 +271,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>;
@@ -387,6 +525,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */ >; };
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +152 -7
189 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +158 -7
195 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +160 -7
197 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw551x.dtsi +140 -7
177 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw552x.dtsi +146 -7
183 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw553x.dtsi +140 -1
169 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw560x.dtsi +157 -7
188 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5903.dtsi +139 -1
162 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5904.dtsi +140 -1
169 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5907.dtsi +140 -2
170 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5910.dtsi +159 -1
182 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5912.dtsi +146 -1
169 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5913.dtsi +152 -1
175 lines not on this page · raw message
Signature · 7 lines
2.7.4 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v2] ARM: dts: imx6qdl-gw: add Gateworks System Controller support
Quoted 41 lines · Tim Harvey
Add Gateworks System Controller support to Gateworks Ventana boards:
- add dt bindings for GSC mfd driver and hwmon driver for ADC's and fan controllers.
- add dt bindings for gpio-keys driver for push-button and interrupt eventsSigned-off-by Tim Harvey <[email protected]>---
v2:
- use keycode bindings fromlinux-event-codes.h
- fix gw5910/gw5913vdd_batADC mode (these boards use 16bit pre-scaled ADC)--- arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 153 +++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 159 ++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 165 +++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 167 ++++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 147 ++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 153 +++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 141 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 164 +++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 140 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 141 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 142 ++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 160 +++++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 147 +++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 153 ++++++++++++++++++++++++++++++- 14 files changed, 2075 insertions(+), 57 deletions(-)arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +1
-0@@ -4,6 +4,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> / { /* these are used by bootloader for disabling nodes */
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi line 23
Quoted 4 lines
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +1
-0@@ -19,6 +20,53 @@ bootargs = "console=ttymxc1,115200"; }; + gpio_keys {
We use hyphen instead of underscore in node name.
Shawn
Quoted 2,608 lines
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +144
-7+ compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -102,6 +150,103 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>;@@ -126,13 +271,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>;@@ -387,6 +525,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */ >; };arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +152
-7@@ -4,6 +4,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> / { /* these are used by bootloader for disabling nodes */@@ -28,6 +29,53 @@ default-brightness-level = <7>; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -165,6 +213,109 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + + channel@29 { + gw,mode = <1>; + reg = <0x29>; + label = "vdd_an1"; + }; + }; + }; + + gsc_gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>;@@ -189,13 +340,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>;@@ -504,6 +648,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; };arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +158
-7@@ -4,6 +4,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> / { /* these are used by bootloader for disabling nodes */@@ -28,6 +29,53 @@ default-brightness-level = <7>; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -158,6 +206,115 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + + channel@26 { + gw,mode = <1>; + reg = <0x26>; + label = "vdd_gps"; + }; + + channel@29 { + gw,mode = <1>; + reg = <0x29>; + label = "vdd_an1"; + }; + }; + }; + + gsc_gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>;@@ -182,13 +339,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>;@@ -486,6 +636,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; };arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +160
-7@@ -4,6 +4,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/sound/fsl-imx-audmux.h> / {@@ -29,6 +30,53 @@ default-brightness-level = <7>; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -195,6 +243,117 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + + channel@26 { + gw,mode = <1>; + reg = <0x26>; + label = "vdd_gps"; + }; + }; + + fan-controller@2c { + compatible = "gw,gsc-fan"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2c>; + }; + }; + + gsc_gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>;@@ -219,13 +378,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>;@@ -571,6 +723,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; };arch/arm/boot/dts/imx6qdl-gw551x.dtsi +140
-7@@ -47,6 +47,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/media/tda1997x.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/sound/fsl-imx-audmux.h> / {@@ -63,6 +64,53 @@ bootargs = "console=ttymxc1,115200"; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -167,6 +215,97 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8a"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0b"; + }; + }; + }; + + gsc_gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>;@@ -191,13 +330,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>;@@ -464,6 +596,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; };arch/arm/boot/dts/imx6qdl-gw552x.dtsi +146
-7@@ -4,6 +4,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> / { /* these are used by bootloader for disabling nodes */@@ -20,6 +21,53 @@ bootargs = "console=ttymxc1,115200"; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -92,6 +140,103 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>;@@ -116,13 +261,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>;@@ -305,6 +443,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; };arch/arm/boot/dts/imx6qdl-gw553x.dtsi +140
-1@@ -46,6 +46,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> / { /* these are used by bootloader for disabling nodes */@@ -61,6 +62,53 @@ stdout-path = &uart2; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -130,11 +178,101 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio: pca9555@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8a"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0b"; + }; + + channel@26 { + gw,mode = <1>; + reg = <0x26>; + label = "vdd_an1"; + }; + }; + }; + + gsc_gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom1: eeprom@50 {@@ -428,6 +566,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; };arch/arm/boot/dts/imx6qdl-gw560x.dtsi +157
-7@@ -88,6 +88,53 @@ default-on; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -243,6 +290,115 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + + channel@26 { + gw,mode = <1>; + reg = <0x26>; + label = "vdd_gps"; + }; + + channel@29 { + gw,mode = <1>; + reg = <0x29>; + label = "vdd_an2"; + }; + }; + }; + + gsc_gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>;@@ -267,13 +423,6 @@ pagesize = <16>; }; - pca9555: gpio@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - ds1672: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>;@@ -608,6 +757,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; };arch/arm/boot/dts/imx6qdl-gw5903.dtsi +139
-1@@ -46,6 +46,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> / { chosen {@@ -71,6 +72,53 @@ default-brightness-level = <100>; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -183,11 +231,101 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pca9555: gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom1: eeprom@50 {arch/arm/boot/dts/imx6qdl-gw5904.dtsi +140
-1@@ -46,6 +46,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> / { /* these are used by bootloader for disabling nodes */@@ -68,6 +69,53 @@ default-brightness-level = <7>; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -205,11 +253,101 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pca9555: gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom1: eeprom@50 {@@ -503,6 +641,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */ >; };arch/arm/boot/dts/imx6qdl-gw5907.dtsi +140
-2@@ -4,6 +4,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> / { /* these are used by bootloader for disabling nodes */@@ -19,6 +20,53 @@ stdout-path = &uart2; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -102,11 +150,101 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom@50 {@@ -133,7 +271,7 @@ pagesize = <16>; }; - rtc@68 { + ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; };arch/arm/boot/dts/imx6qdl-gw5910.dtsi +159
-1@@ -4,6 +4,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> / { /* these are used by bootloader for disabling nodes */@@ -22,6 +23,53 @@ reg = <0x10000000 0x20000000>; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -111,11 +159,121 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <3>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vdd_vin"; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <800000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vdd_5p0"; + gw,voltage-divider-ohms = <22100 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_3p0"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_arm"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_soc"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_1p5"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_1p8"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_1p0"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@9c { + gw,mode = <2>; + reg = <0x9c>; + label = "vdd_an1"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gsc_gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom@50 {arch/arm/boot/dts/imx6qdl-gw5912.dtsi +146
-1@@ -4,6 +4,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> / { /* these are used by bootloader for disabling nodes */@@ -20,6 +21,53 @@ stdout-path = &uart2; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -106,11 +154,108 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + + fan-controller@a { + #address-cells = <1>; + #size-cells = <0>; + compatible = "gw,gsc-fan"; + reg = <0x0a>; + }; + }; + + gsc_gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom@50 {arch/arm/boot/dts/imx6qdl-gw5913.dtsi +152
-1@@ -4,6 +4,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> / { /* these are used by bootloader for disabling nodes */@@ -19,6 +20,53 @@ stdout-path = &uart2; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user_pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key_erased { + label = "key-erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom_wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch_hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";@@ -87,11 +135,114 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <3>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vdd_vin"; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <800000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vdd_5p0"; + gw,voltage-divider-ohms = <22100 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_arm"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_soc"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_1p5"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_1p0"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_3p0"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_an1"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gsc_gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom@50 {Signature · 1 line
2.7.4
PATCH v3 1/1 ARM: dts: imx6qdl-gw: add Gateworks System Controller support
In reply to Tim HarveyAdd Gateworks System Controller support to Gateworks Ventana boards:
- add dt bindings for GSC mfd driver and hwmon driver for ADC's and fan controllers.
- add dt bindings for gpio-keys driver for push-button and interrupt events
---
v3:
- change underscore to hyphen in node names
- use generic node name for gsc_gpio nodes
v2:
- use keycode bindings from linux-event-codes.h
- fix gw5910 vdd_bat adc mode
- fix gw5913 vdd_bat adc mode
--- arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 153 +++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 159 ++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 165 +++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 167 ++++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 147 ++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 153 +++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 141 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 164 +++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 140 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 141 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 142 ++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 160 +++++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 147 +++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 153 ++++++++++++++++++++++++++++++- 14 files changed, 2075 insertions(+), 57 deletions(-)
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +146 -7
@@ -4,6 +4,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> / { /* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@ bootargs = "console=ttymxc1,115200"; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";
@@ -102,6 +150,103 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>;
@@ -126,13 +271,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>;
@@ -387,6 +525,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */ >; };
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +152 -7
189 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +158 -7
195 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +160 -7
197 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw551x.dtsi +140 -7
177 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw552x.dtsi +146 -7
183 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw553x.dtsi +140 -1
169 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw560x.dtsi +157 -7
188 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5903.dtsi +139 -1
162 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5904.dtsi +140 -1
169 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5907.dtsi +140 -2
170 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5910.dtsi +159 -1
182 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5912.dtsi +146 -1
169 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5913.dtsi +152 -1
175 lines not on this page · raw message
Signature · 1 line
2.7.4
Shawn Guo
AppliedRe: [PATCH v3] ARM: dts: imx6qdl-gw: add Gateworks System Controller support
Quoted 6 lines · Tim Harvey
Add Gateworks System Controller support to Gateworks Ventana boards:
- add dt bindings for GSC mfd driver and hwmon driver for ADC's and fan controllers.
- add dt bindings for gpio-keys driver for push-button and interrupt eventsSigned-off-by Tim Harvey <[email protected]>
Applied, thanks.
Re: [PATCH v3] ARM: dts: imx6qdl-gw: add Gateworks System Controller support
In reply to Tim HarveyQuoted 6 lines · Tim Harvey
Add Gateworks System Controller support to Gateworks Ventana boards:
- add dt bindings for GSC mfd driver and hwmon driver for ADC's and fan controllers.
- add dt bindings for gpio-keys driver for push-button and interrupt eventsSigned-off-by Tim Harvey <[email protected]>
It causes DTC warnings like below.
../arch/arm/boot/dts/imx6qdl-gw5912.dtsi:248.4-17: Warning (reg_format): /soc/bus@2100000/i2c@21a0000/gsc@20/fan-controller@a:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 0) arch/arm/boot/dts/imx6dl-gw5912.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'arch/arm/boot/dts/imx6dl-gw5912.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'arch/arm/boot/dts/imx6dl-gw5912.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
../arch/arm/boot/dts/imx6qdl-gw5912.dtsi:244.20-249.5: Warning (avoid_default_addr_size): /soc/bus@2100000/i2c@21a0000/gsc@20/fan-controller@a: Relying on default #address-cells value
Patch dropped.
PATCH v4 1/1 ARM: dts: imx6qdl-gw: add Gateworks System Controller support
In reply to Tim HarveyAdd Gateworks System Controller support to Gateworks Ventana boards:
- add dt bindings for GSC mfd driver and hwmon driver for ADC's and fan controllers.
- add dt bindings for gpio-keys driver for push-button and interrupt events
---
v4:
- add missing #address-cells to gw5912 gsc node to address dtc warning
v3:
- change underscore to hyphen in node names
- use generic node name for gsc_gpio nodes
v2:
- use keycode bindings from linux-event-codes.h
- fix gw5910 vdd_bat adc mode
- fix gw5913 vdd_bat adc mode
--- arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 153 +++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 159 ++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 165 +++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 167 ++++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 147 ++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 153 +++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 141 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 164 +++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 140 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 141 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 142 ++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 160 +++++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 148 +++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 153 ++++++++++++++++++++++++++++++- 14 files changed, 2076 insertions(+), 57 deletions(-)
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +146 -7
@@ -4,6 +4,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> / { /* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@ bootargs = "console=ttymxc1,115200"; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";
@@ -102,6 +150,103 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>;
@@ -126,13 +271,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>;
@@ -387,6 +525,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */ >; };
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +152 -7
189 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +158 -7
195 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +160 -7
197 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw551x.dtsi +140 -7
177 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw552x.dtsi +146 -7
183 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw553x.dtsi +140 -1
169 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw560x.dtsi +157 -7
188 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5903.dtsi +139 -1
162 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5904.dtsi +140 -1
169 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5907.dtsi +140 -2
170 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5910.dtsi +159 -1
182 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5912.dtsi +147 -1
170 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw5913.dtsi +152 -1
175 lines not on this page · raw message
Signature · 1 line
2.7.4
Shawn Guo
AppliedRe: [PATCH v4] ARM: dts: imx6qdl-gw: add Gateworks System Controller support
Quoted 6 lines · Tim Harvey
Add Gateworks System Controller support to Gateworks Ventana boards:
- add dt bindings for GSC mfd driver and hwmon driver for ADC's and fan controllers.
- add dt bindings for gpio-keys driver for push-button and interrupt eventsSigned-off-by Tim Harvey <[email protected]>
Applied, thanks.