i2c: i2c-cortina: added CAxxxx I2C support
PATCH v8 1/2 i2c: i2c-cortina: added CAxxxx I2C support
From: Arthur Li <[email protected]>
Add I2C controller support for Cortina Access CAxxxx SoCs
CA_I2C: DT binding for I2C controller
DT binding document for Cortina I2C driver
---
Changes in v8:
- No code change
- Split out individual driver from Cortina Package 2 patch series to help streamline acceptence into master
Changes in v7:
- Added additional description info in I2C KConfig
Changes in v6:
- Add I2C DT binding document
Changes in v4:
- Utilize standard I2C macros from <i2c.h>
- Return ETIMEDOUT in funcs that can timeout
- Return i2c_xfer_init() result to caller of i2c_read() if it fails within i2c_read() execution
- Fix misc. style guide conformance issues
- Use printf() to report i2c_xfer() runtime errors instead of debug()
MAINTAINERS | 4 + doc/device-tree-bindings/i2c/i2c-cortina.txt | 18 ++ drivers/i2c/Kconfig | 8 + drivers/i2c/Makefile | 1 + drivers/i2c/i2c-cortina.c | 346 +++++++++++++++++++++++++++ drivers/i2c/i2c-cortina.h | 84 +++++++ 6 files changed, 461 insertions(+) create mode 100644 doc/device-tree-bindings/i2c/i2c-cortina.txt create mode 100644 drivers/i2c/i2c-cortina.c create mode 100644 drivers/i2c/i2c-cortina.h
MAINTAINERS +4 -0
@@ -181,6 +181,8 @@ F: drivers/gpio/cortina_gpio.c F: drivers/watchdog/cortina_wdt.c F: drivers/serial/serial_cortina.c F: drivers/mmc/ca_dw_mmc.c +F: drivers/i2c/i2c-cortina.c +F: drivers/i2c/i2c-cortina.h ARM/CZ.NIC TURRIS MOX SUPPORT M: Marek Behun <[email protected]>
@@ -732,6 +734,8 @@ F: drivers/gpio/cortina_gpio.c F: drivers/watchdog/cortina_wdt.c F: drivers/serial/serial_cortina.c F: drivers/mmc/ca_dw_mmc.c +F: drivers/i2c/i2c-cortina.c +F: drivers/i2c/i2c-cortina.h MIPS MSCC M: Gregory CLEMENT <[email protected]>
doc/device-tree-bindings/i2c/i2c-cortina.txt new file +18 -0
@@ -0,0 +1,18 @@ +* I2C for Cortina platforms + +Required properties : +- compatible : Must be "cortina,ca-i2c" +- reg : Offset and length of the register set for the device + +Recommended properties : +- clock-frequency : desired I2C bus clock frequency in Hz. If not specified, + default value is 100000. Possible values are 100000, + 400000 and 1000000. + +Examples : + + i2c: i2c at f4329120 { + compatible = "cortina,ca-i2c"; + reg = <0x0 0xf4329120 0x28>; + clock-frequency = <400000>; + };
drivers/i2c/Kconfig +8 -0
@@ -93,6 +93,14 @@ config SYS_I2C_CADENCE Say yes here to select Cadence I2C Host Controller. This controller is e.g. used by Xilinx Zynq. +config SYS_I2C_CA + tristate "Cortina-Access I2C Controller" + depends on DM_I2C && CORTINA_PLATFORM + default n + help + Add support for the Cortina Access I2C host controller. + Say yes here to select Cortina-Access I2C Host Controller. + config SYS_I2C_DAVINCI bool "Davinci I2C Controller" depends on (ARCH_KEYSTONE || ARCH_DAVINCI)
drivers/i2c/Makefile +1 -0
@@ -12,6 +12,7 @@ obj-$(CONFIG_SYS_I2C) += i2c_core.o obj-$(CONFIG_SYS_I2C_ASPEED) += ast_i2c.o obj-$(CONFIG_SYS_I2C_AT91) += at91_i2c.o obj-$(CONFIG_SYS_I2C_CADENCE) += i2c-cdns.o +obj-$(CONFIG_SYS_I2C_CA) += i2c-cortina.o obj-$(CONFIG_SYS_I2C_DAVINCI) += davinci_i2c.o obj-$(CONFIG_SYS_I2C_DW) += designware_i2c.o ifdef CONFIG_DM_PCI
drivers/i2c/i2c-cortina.c new file +346 -0
346 lines not on this page · raw message
drivers/i2c/i2c-cortina.h new file +84 -0
84 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v8 2/2 board: presidio-asic: Add I2C support
Add I2C board support for Cortina Access Presidio Engineering Board
---
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v4: None
configs/cortina_presidio-asic-emmc_defconfig | 3 +++ 1 file changed, 3 insertions(+)
configs/cortina_presidio-asic-emmc_defconfig +3 -0
@@ -10,6 +10,7 @@ CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_R=y CONFIG_SYS_PROMPT="G3#" +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_WDT=y
@@ -24,6 +25,8 @@ CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" # CONFIG_NET is not set CONFIG_DM=y CONFIG_CORTINA_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CA=y CONFIG_DM_MMC=y CONFIG_MMC_DW=y CONFIG_MMC_DW_CORTINA=y
Signature · 1 line
2.7.4