Skip to contentSkip to conversation

net: stmmac: don't attach interface until resume finishes

PATCH Applied Leon Yu 2 participants 2 messages May 22, 2020 – May 23, 2020

Subsystems (4)
lore
Share & tools
lore

Leon Yu

author
#0 lore raw

PATCH 1/1 net: stmmac: don't attach interface until resume finishes

Commit 14b41a2959fb ("net: stmmac: Delete txtimer in suspend") was the first attempt to fix a race between mod_timer() and setup_timer() during stmmac_resume(). However the issue still exists as the commit only addressed half of the issue.

Same race can still happen as stmmac_resume() re-attaches interface way too early - even before hardware is fully initialized. Worse, doing so allows network traffic to restart and stmmac_tx_timer_arm() being called in the middle of stmmac_resume(), which re-init tx timers in stmmac_init_coalesce(). timer_list will be corrupted and system crashes as a result of race between mod_timer() and setup_timer().

  systemd--1995    2.... 552950018us : stmmac_suspend: 4994
  ksoftirq-9       0..s2 553123133us : stmmac_tx_timer_arm: 2276
  systemd--1995    0.... 553127896us : stmmac_resume: 5101
  systemd--320     7...2 553132752us : stmmac_tx_timer_arm: 2276
  (sd-exec-1999    5...2 553135204us : stmmac_tx_timer_arm: 2276
  ---------------------------------
  pc : run_timer_softirq+0x468/0x5e0
  lr : run_timer_softirq+0x570/0x5e0
  Call trace:
   run_timer_softirq+0x468/0x5e0
   __do_softirq+0x124/0x398
   irq_exit+0xd8/0xe0
   __handle_domain_irq+0x6c/0xc0
   gic_handle_irq+0x60/0xb0
   el1_irq+0xb8/0x180
   arch_cpu_idle+0x38/0x230
   default_idle_call+0x24/0x3c
   do_idle+0x1e0/0x2b8
   cpu_startup_entry+0x28/0x48
   secondary_start_kernel+0x1b4/0x208

Fix this by deferring netif_device_attach() to the end of stmmac_resume().

---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +2 -2
index a999d6b33a64..1f319c9cee46 100644
@@ -5190,8 +5190,6 @@ int stmmac_resume(struct device *dev)
 			return ret;
 	}
 
-	netif_device_attach(ndev);
-
 	mutex_lock(&priv->lock);
 
 	stmmac_reset_queues_param(priv);
@@ -5218,6 +5216,8 @@ int stmmac_resume(struct device *dev)
 
 	phylink_mac_change(priv->phylink, true);
 
+	netif_device_attach(ndev);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(stmmac_resume);
Signature · 1 line
2.7.4
maintainer Applied
#1 lore raw

From: Leon Yu <[email protected]>
Date: Fri, 22 May 2020 23:29:43 +0800

Quoted 33 lines

Commit 14b41a2959fb ("net: stmmac: Delete txtimer in suspend") was the first attempt to fix a race between mod_timer() and setup_timer() during stmmac_resume(). However the issue still exists as the commit only addressed half of the issue.

Same race can still happen as stmmac_resume() re-attaches interface way too early - even before hardware is fully initialized. Worse, doing so allows network traffic to restart and stmmac_tx_timer_arm() being called in the middle of stmmac_resume(), which re-init tx timers in stmmac_init_coalesce(). timer_list will be corrupted and system crashes as a result of race between mod_timer() and setup_timer().

  systemd--1995    2.... 552950018us : stmmac_suspend: 4994
  ksoftirq-9       0..s2 553123133us : stmmac_tx_timer_arm: 2276
  systemd--1995    0.... 553127896us : stmmac_resume: 5101
  systemd--320     7...2 553132752us : stmmac_tx_timer_arm: 2276
  (sd-exec-1999    5...2 553135204us : stmmac_tx_timer_arm: 2276
  ---------------------------------
  pc : run_timer_softirq+0x468/0x5e0
  lr : run_timer_softirq+0x570/0x5e0
  Call trace:
   run_timer_softirq+0x468/0x5e0
   __do_softirq+0x124/0x398
   irq_exit+0xd8/0xe0
   __handle_domain_irq+0x6c/0xc0
   gic_handle_irq+0x60/0xb0
   el1_irq+0xb8/0x180
   arch_cpu_idle+0x38/0x230
   default_idle_call+0x24/0x3c
   do_idle+0x1e0/0x2b8
   cpu_startup_entry+0x28/0x48
   secondary_start_kernel+0x1b4/0x208
Quoted 4 lines

Fix this by deferring netif_device_attach() to the end of stmmac_resume().

Applied, thank you.