kbuild: reuse vmlinux.o in vmlinux_link
PATCH 1/1 kbuild: reuse vmlinux.o in vmlinux_link
Instead of linking all compilation units again each time vmlinux_link is called, reuse vmlinux.o from modpost_link.
With x86_64 allyesconfig, vmlinux_link is called three times and reusing vmlinux.o reduces the build time ~38 seconds on my system (59% reduction in the time spent in vmlinux_link).
--- scripts/link-vmlinux.sh | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
scripts/link-vmlinux.sh +1 -4
@@ -77,11 +77,8 @@ vmlinux_link() if [ "${SRCARCH}" != "um" ]; then objects="--whole-archive \ - ${KBUILD_VMLINUX_OBJS} \ + vmlinux.o \ --no-whole-archive \ - --start-group \ - ${KBUILD_VMLINUX_LIBS} \ - --end-group \ ${@}" ${LD} ${KBUILD_LDFLAGS} ${LDFLAGS_vmlinux} \
base-commit: b85051e755b0e9d6dd8f17ef1da083851b83287d
Signature · 1 line
2.27.0.rc0.183.gde8f92d652-goog
Quoted 6 lines · Sami Tolvanen
Instead of linking all compilation units again each time
vmlinux_linkis called, reuse vmlinux.o frommodpost_link.With
x86_64allyesconfig,vmlinux_linkis called three times and reusing vmlinux.o reduces the build time ~38 seconds on my system (59% reduction in the time spent invmlinux_link).
Nice! Any time savings at final link is a big cumulative win.
Quoted 12 lines
Signed-off-by Sami Tolvanen <[email protected]>--- scripts/link-vmlinux.sh | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)scripts/link-vmlinux.sh +0
-0@@ -77,11 +77,8 @@ vmlinux_link() if [ "${SRCARCH}" != "um" ]; then
scripts/link-vmlinux.sh vmlinux_link() · line 84
Quoted 10 lines
scripts/link-vmlinux.sh +1
-4objects="--whole-archive \ - ${KBUILD_VMLINUX_OBJS} \ + vmlinux.o \ --no-whole-archive \ - --start-group \ - ${KBUILD_VMLINUX_LIBS} \ - --end-group \ ${@}" ${LD} ${KBUILD_LDFLAGS} ${LDFLAGS_vmlinux} \
I think the "um" case can be updated as well too, yes?
Also, I think the comment above modpost_link() needs to be updated now to reflect the nature of how vmlinux.o gets used after this patch.
Signature · 1 line
Kees Cook
Quoted 32 lines · Kees Cook
Quoted 6 lines · Sami Tolvanen
Instead of linking all compilation units again each time
vmlinux_linkis called, reuse vmlinux.o frommodpost_link.With
x86_64allyesconfig,vmlinux_linkis called three times and reusing vmlinux.o reduces the build time ~38 seconds on my system (59% reduction in the time spent invmlinux_link).Nice! Any time savings at final link is a big cumulative win.
Quoted 21 lines
Signed-off-by Sami Tolvanen <[email protected]>--- scripts/link-vmlinux.sh | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)scripts/link-vmlinux.sh +1
-4@@ -77,11 +77,8 @@ vmlinux_link() if [ "${SRCARCH}" != "um" ]; then objects="--whole-archive \ - ${KBUILD_VMLINUX_OBJS} \ + vmlinux.o \ --no-whole-archive \ - --start-group \ - ${KBUILD_VMLINUX_LIBS} \ - --end-group \ ${@}"
Quoted 3 lines
scripts/link-vmlinux.sh vmlinux_link() · line 84
Quoted 1 line
scripts/link-vmlinux.sh +0
-0${LD} ${KBUILD_LDFLAGS} ${LDFLAGS_vmlinux} \I think the "um" case can be updated as well too, yes?
I agree.
I changed the um part, then ARCH=um build is successful.
Quoted 5 lines
Also, I think the comment above
modpost_link()needs to be updated now to reflect the nature of how vmlinux.o gets used after this patch.--
Kees Cook
Signature · 2 lines
Best Regards Masahiro Yamada
Quoted 6 lines · Sami Tolvanen
Instead of linking all compilation units again each time
vmlinux_linkis called, reuse vmlinux.o frommodpost_link.With
x86_64allyesconfig,vmlinux_linkis called three times and reusing vmlinux.o reduces the build time ~38 seconds on my system (59% reduction in the time spent invmlinux_link).
BTW, I'll see this most in that it knocks about 6% off my "I changed 1 .c file and now I'm rebuilding" workflow time (which is obviously dominated by linking), from 25 seconds to 23.5 seconds. And since most of those seconds are spent staring at the build, it feels like a lot more. ;)
Signature · 1 line
Kees Cook
Quoted 31 lines · Sami Tolvanen
Instead of linking all compilation units again each time
vmlinux_linkis called, reuse vmlinux.o frommodpost_link.With
x86_64allyesconfig,vmlinux_linkis called three times and reusing vmlinux.o reduces the build time ~38 seconds on my system (59% reduction in the time spent invmlinux_link).Signed-off-by Sami Tolvanen <[email protected]>--- scripts/link-vmlinux.sh | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)scripts/link-vmlinux.sh +1
-4@@ -77,11 +77,8 @@ vmlinux_link() if [ "${SRCARCH}" != "um" ]; then objects="--whole-archive \ - ${KBUILD_VMLINUX_OBJS} \ + vmlinux.o \ --no-whole-archive \ - --start-group \ - ${KBUILD_VMLINUX_LIBS} \ - --end-group \ ${@}" ${LD} ${KBUILD_LDFLAGS} ${LDFLAGS_vmlinux} \
Quoted 4 lines
base-commit:
b85051e755b0e9d6dd8f17ef1da083851b83287d--
2.27.0.rc0.183.gde8f92d652-goog
I like this patch irrespective of CLANG_LTO, but
unfortunately, my build test failed.
ARCH=powerpc failed to build as follows:
MODPOST vmlinux.o
MODINFO modules.builtin.modinfo
GEN modules.builtin
LD .tmp_vmlinux.kallsyms1
vmlinux.o:(__ftr_alt_97+0x20): relocation truncated to fit:R_PPC64_REL14 against `.text'+4b1c vmlinux.o:(__ftr_alt_97+0x164): relocation truncated to fit:R_PPC64_REL14 against `.text'+1cf78 vmlinux.o:(__ftr_alt_97+0x288): relocation truncated to fit:R_PPC64_REL14 against `.text'+1dac4 vmlinux.o:(__ftr_alt_97+0x2f0): relocation truncated to fit:R_PPC64_REL14 against `.text'+1e254
make: *** [Makefile:1125: vmlinux] Error 1
I used powerpc-linux-gcc
available at
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/
Build command:
make -j24 ARCH=powerpc CROSS_COMPILE=powerpc-linux- defconfig all
Could you check it please?
I will apply it to my test branch.
Perhaps, 0-day bot may find more failure cases.
--
Best Regards
Masahiro Yamada
+ Michael, and PPC ML.
They may know something about the reason of failure.
Quoted 84 lines · Masahiro Yamada
Quoted 31 lines · Sami Tolvanen
Instead of linking all compilation units again each time
vmlinux_linkis called, reuse vmlinux.o frommodpost_link.With
x86_64allyesconfig,vmlinux_linkis called three times and reusing vmlinux.o reduces the build time ~38 seconds on my system (59% reduction in the time spent invmlinux_link).Signed-off-by Sami Tolvanen <[email protected]>--- scripts/link-vmlinux.sh | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)scripts/link-vmlinux.sh +1
-4@@ -77,11 +77,8 @@ vmlinux_link() if [ "${SRCARCH}" != "um" ]; then objects="--whole-archive \ - ${KBUILD_VMLINUX_OBJS} \ + vmlinux.o \ --no-whole-archive \ - --start-group \ - ${KBUILD_VMLINUX_LIBS} \ - --end-group \ ${@}" ${LD} ${KBUILD_LDFLAGS} ${LDFLAGS_vmlinux} \Quoted 4 lines
base-commit:
b85051e755b0e9d6dd8f17ef1da083851b83287d--
2.27.0.rc0.183.gde8f92d652-googI like this patch irrespective of
CLANG_LTO, but
unfortunately, my build test failed.ARCH=powerpc failed to build as follows:
MODPOST vmlinux.o
MODINFO modules.builtin.modinfo
GEN modules.builtin
LD .tmp_vmlinux.kallsyms1
vmlinux.o:(__ftr_alt_97+0x20): relocation truncated to fit:R_PPC64_REL14against `.text'+4b1c vmlinux.o:(__ftr_alt_97+0x164): relocation truncated to fit:R_PPC64_REL14against `.text'+1cf78 vmlinux.o:(__ftr_alt_97+0x288): relocation truncated to fit:R_PPC64_REL14against `.text'+1dac4 vmlinux.o:(__ftr_alt_97+0x2f0): relocation truncated to fit:R_PPC64_REL14against `.text'+1e254
make: *** [Makefile:1125: vmlinux] Error 1I used powerpc-linux-gcc
available at
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/Build command:
make -j24 ARCH=powerpc CROSS_COMPILE=powerpc-linux- defconfig all
Could you check it please?
I will apply it to my test branch.
Perhaps, 0-day bot may find more failure cases.--
Best Regards
Masahiro Yamada
Signature · 2 lines
Best Regards Masahiro Yamada
Excerpts from Masahiro Yamada's message of May 23, 2020 3:44 am:
Quoted 3 lines
+ Michael, and PPC ML.
They may know something about the reason of failure.
Because the linker can't put branch stubs within object code sections, so when you incrementally link them too large, the linker can't resolve branches into other object files.
This is why we added incremental linking in the first place. I suppose it could be made conditional for platforms that can use this optimization.
What'd be really nice is if we could somehow build and link kallsyms without relinking everything twice, and if we could do section mismatch analysis without making that vmlinux.o as well. I had a few ideas but not enough time to do much work on it.
Thanks,
Nick
Quoted 94 lines · Masahiro Yamada
Quoted 84 lines · Sami Tolvanen
Quoted 31 lines
Instead of linking all compilation units again each time
vmlinux_linkis called, reuse vmlinux.o frommodpost_link.With
x86_64allyesconfig,vmlinux_linkis called three times and reusing vmlinux.o reduces the build time ~38 seconds on my system (59% reduction in the time spent invmlinux_link).Signed-off-by Sami Tolvanen <[email protected]>--- scripts/link-vmlinux.sh | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)scripts/link-vmlinux.sh +1
-4@@ -77,11 +77,8 @@ vmlinux_link() if [ "${SRCARCH}" != "um" ]; then objects="--whole-archive \ - ${KBUILD_VMLINUX_OBJS} \ + vmlinux.o \ --no-whole-archive \ - --start-group \ - ${KBUILD_VMLINUX_LIBS} \ - --end-group \ ${@}" ${LD} ${KBUILD_LDFLAGS} ${LDFLAGS_vmlinux} \Quoted 4 lines
base-commit:
b85051e755b0e9d6dd8f17ef1da083851b83287d--
2.27.0.rc0.183.gde8f92d652-googI like this patch irrespective of
CLANG_LTO, but
unfortunately, my build test failed.ARCH=powerpc failed to build as follows:
MODPOST vmlinux.o
MODINFO modules.builtin.modinfo
GEN modules.builtin
LD .tmp_vmlinux.kallsyms1
vmlinux.o:(__ftr_alt_97+0x20): relocation truncated to fit:R_PPC64_REL14against `.text'+4b1c vmlinux.o:(__ftr_alt_97+0x164): relocation truncated to fit:R_PPC64_REL14against `.text'+1cf78 vmlinux.o:(__ftr_alt_97+0x288): relocation truncated to fit:R_PPC64_REL14against `.text'+1dac4 vmlinux.o:(__ftr_alt_97+0x2f0): relocation truncated to fit:R_PPC64_REL14against `.text'+1e254
make: *** [Makefile:1125: vmlinux] Error 1I used powerpc-linux-gcc
available at
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/Build command:
make -j24 ARCH=powerpc CROSS_COMPILE=powerpc-linux- defconfig all
Could you check it please?
I will apply it to my test branch.
Perhaps, 0-day bot may find more failure cases.--
Best Regards
Masahiro YamadaSignature · 2 lines
Best Regards Masahiro Yamada
Hi Nicholas,
(+CC: Sam Ravnborg)
Quoted 9 lines · Nicholas Piggin
Excerpts from Masahiro Yamada's message of May 23, 2020 3:44 am:
Quoted 3 lines
+ Michael, and PPC ML.
They may know something about the reason of failure.
Because the linker can't put branch stubs within object code sections, so when you incrementally link them too large, the linker can't resolve branches into other object files.
Ah, you are right.
So, this is a problem not only for PPC
but also for ARM (both 32 and 64 bit), etc.
ARM needs to insert a veneer to jump far.
Prior to thin archive, we could not compile
ARCH=arm allyesconfig becausedrivers/built-in.o was too large.
This patch gets us back to the too large
incremental object situation.
With my quick compile-testing,
ARCH=arm allyesconfig
and ARCH=arm64 allyesconfig are broken.
Quoted 8 lines
This is why we added incremental linking in the first place. I suppose it could be made conditional for platforms that can use this optimization.
What'd be really nice is if we could somehow build and link kallsyms without relinking everything twice, and if we could do section mismatch analysis without making that vmlinux.o as well. I had a few ideas but not enough time to do much work on it.
Right, kallsyms links 3 times. (not twice)
Hmm, I think Sami's main motivation is Clang LTO.
LTO is very time-consuming.
So, the android common kernel implements Clang LTO in the pre modpost stage:
1) LTO against vmlinux.o
2) modpost against vmlinux.o
3) Link vmlinux.o + kallsyms into vmlinux
(this requires linking 3 times)
If we move LTO to 3), we need to do LTO 3 times.
And, this was how GCC LTO was implemented in 2014, (then rejected by Linus).
How to do modpost without making vmlinux.o ?
In old days, the section mismatch analysis was done against the final vmlinux.
85bd2fddd68e757da8e1af98f857f61a3c9ce647 changed
it to run modpost for individual .o files.
Then, 741f98fe298a73c9d47ed53703c1279a29718581
introduced vmlinux.o to use it for modpost.
The following two commits.
I did not fully understand the background, though.
I CC'ed Sam in case he may add some comments.
commit 85bd2fddd68e757da8e1af98f857f61a3c9ce647
Author: Sam Ravnborg <[email protected]> Date: Mon Feb 26 15:33:52 2007 +0100
kbuild: fix section mismatch check for vmlinux
vmlinux does not contain relocation entries which is used by the section mismatch checks. Reported by: Atsushi Nemoto <[email protected]>
Use the individual objects as inputs to overcome this limitation.
In modpost check the .o files and skip non-ELF files.
commit 741f98fe298a73c9d47ed53703c1279a29718581
Author: Sam Ravnborg <[email protected]> Date: Tue Jul 17 10:54:06 2007 +0200
kbuild: do section mismatch check on full vmlinux
Previously we did do the check on the .o files used to link vmlinux but that failed to find questionable references across the .o files.
Create a dedicated vmlinux.o file used only for section mismatch checks that uses the defualt linker script so section does not get renamed.
The vmlinux.o may later be used as part of the the final link of vmlinux but for now it is used fo section mismatch only.
For a defconfig build this is instant but for an allyesconfig this add two minutes to a full build (that anyways takes ~2 hours).
Quoted 98 lines
Thanks,
NickQuoted 94 lines · Masahiro Yamada
Quoted 77 lines · Sami Tolvanen
Quoted 31 lines
Instead of linking all compilation units again each time
vmlinux_linkis called, reuse vmlinux.o frommodpost_link.With
x86_64allyesconfig,vmlinux_linkis called three times and reusing vmlinux.o reduces the build time ~38 seconds on my system (59% reduction in the time spent invmlinux_link).Signed-off-by Sami Tolvanen <[email protected]>--- scripts/link-vmlinux.sh | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)scripts/link-vmlinux.sh +1
-4@@ -77,11 +77,8 @@ vmlinux_link() if [ "${SRCARCH}" != "um" ]; then objects="--whole-archive \ - ${KBUILD_VMLINUX_OBJS} \ + vmlinux.o \ --no-whole-archive \ - --start-group \ - ${KBUILD_VMLINUX_LIBS} \ - --end-group \ ${@}" ${LD} ${KBUILD_LDFLAGS} ${LDFLAGS_vmlinux} \Quoted 4 lines
base-commit:
b85051e755b0e9d6dd8f17ef1da083851b83287d--
2.27.0.rc0.183.gde8f92d652-googI like this patch irrespective of
CLANG_LTO, but
unfortunately, my build test failed.ARCH=powerpc failed to build as follows:
MODPOST vmlinux.o
MODINFO modules.builtin.modinfo
GEN modules.builtin
LD .tmp_vmlinux.kallsyms1
vmlinux.o:(__ftr_alt_97+0x20): relocation truncated to fit:R_PPC64_REL14against `.text'+4b1c vmlinux.o:(__ftr_alt_97+0x164): relocation truncated to fit:R_PPC64_REL14against `.text'+1cf78 vmlinux.o:(__ftr_alt_97+0x288): relocation truncated to fit:R_PPC64_REL14against `.text'+1dac4 vmlinux.o:(__ftr_alt_97+0x2f0): relocation truncated to fit:R_PPC64_REL14against `.text'+1e254
make: *** [Makefile:1125: vmlinux] Error 1I used powerpc-linux-gcc
available at
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/Build command:
make -j24 ARCH=powerpc CROSS_COMPILE=powerpc-linux- defconfig all
Could you check it please?
Quoted 7 lines
I will apply it to my test branch.
Perhaps, 0-day bot may find more failure cases.--
Best Regards
Masahiro Yamada--
Best Regards
Masahiro Yamada
--
Best Regards
Masahiro Yamada
Hi Masahiro.
Quoted 55 lines · Masahiro Yamada
Hi Nicholas,
(+CC: Sam Ravnborg)Quoted 9 lines · Nicholas Piggin
Excerpts from Masahiro Yamada's message of May 23, 2020 3:44 am:
Quoted 3 lines
+ Michael, and PPC ML.
They may know something about the reason of failure.
Because the linker can't put branch stubs within object code sections, so when you incrementally link them too large, the linker can't resolve branches into other object files.
Ah, you are right.
So, this is a problem not only for PPC but also for ARM (both 32 and 64 bit), etc.
ARM needs to insert a veneer to jump far.
Prior to thin archive, we could not compile ARCH=arm allyesconfig because
drivers/built-in.owas too large.This patch gets us back to the too large incremental object situation.
With my quick compile-testing, ARCH=arm allyesconfig
and ARCH=arm64 allyesconfig are broken.Quoted 8 lines
This is why we added incremental linking in the first place. I suppose it could be made conditional for platforms that can use this optimization.
What'd be really nice is if we could somehow build and link kallsyms without relinking everything twice, and if we could do section mismatch analysis without making that vmlinux.o as well. I had a few ideas but not enough time to do much work on it.
Right, kallsyms links 3 times. (not twice)
Hmm, I think Sami's main motivation is Clang LTO.
LTO is very time-consuming.
So, the android common kernel implements Clang LTO in the pre modpost stage:
Quoted 6 lines
1) LTO against vmlinux.o
2) modpost against vmlinux.o
3) Link vmlinux.o + kallsyms into vmlinux (this requires linking 3 times)
We have kallsyms we had to link three times because the linking increased the object a little in size so symbols did not match. The last time was added more or less only to check that we did have stable symbol addresses.
All this predates LTO stuff which we only introduced later.
The reason for doing modpost on vmlinux.o was that we had cases where everything in drivers/ was fine but there was section mismatch references from arch/* to drivers/*
This is back when there were much more drivers in arch/ than what we have today.
And back then we also had much more to check ad we had cPU hotplug that could really cause section mismatches - this is no longer the case which is a good thing.
...
Quoted 16 lines
The following two commits.
I did not fully understand the background, though.I CC'ed Sam in case he may add some comments.
commit
85bd2fddd68e757da8e1af98f857f61a3c9ce647Author: Sam Ravnborg <[email protected]> Date: Mon Feb 26 15:33:52 2007 +0100kbuild: fix section mismatch check for vmlinux
vmlinux does not contain relocation entries which is used by the section mismatch checks. Reported by: Atsushi Nemoto <[email protected]>
Quoted 5 lines
Use the individual objects as inputs to overcome this limitation.
In modpost check the .o files and skip non-ELF files.Signed-off-by Sam Ravnborg <[email protected]>
So we checked vmlinx - but vmlinx did have too much stripped away. so in reality nothing was checked.
To allow the warnings to be as precise as possible move the checks out to the indovidual .o files.
Sometimes the names was mangled a little so if warnigns was only reported on vmlinx level in could be difficult to track down the offender.
This would then also do the check on .o files that had all the relocation symbols rtequired.
Quoted 13 lines
commit
741f98fe298a73c9d47ed53703c1279a29718581Author: Sam Ravnborg <[email protected]> Date: Tue Jul 17 10:54:06 2007 +0200kbuild: do section mismatch check on full vmlinux
Previously we did do the check on the .o files used to link vmlinux but that failed to find questionable references across the .o files.
Create a dedicated vmlinux.o file used only for section mismatch checks that uses the defualt linker script so section does not get renamed.
Quoted 6 lines
The vmlinux.o may later be used as part of the the final link of vmlinux but for now it is used fo section mismatch only.
For a defconfig build this is instant but for an allyesconfig this add two minutes to a full build (that anyways takes ~2 hours).Signed-off-by Sam Ravnborg <[email protected]>
But when we introduced check of the individual .o fiules we missed when the references spanned outside the .o files as explained previously. So included a link of vmlinx.o that did NOT drop the relocations so we could use it to check for the remaining section mismatch warnings.
Remember - back when we started this we had many hundred warnings and it was a fight to keep that number low.
But we also wanted to report as much as possible.
There was back then several discussions if this was really worth the effort. How much was gained from discarding the memory where the section mismatch warnigns was triggered.
In other words - how about just keeping the init code in memory so there were no illegal references anymore.
That is something that is maybe worth to consiuder again as we have even less memory we save by throwing away the init code.
But I think this is a topic for another mail thread.
Sam
Hi Sam,
Thanks for the comments.
Quoted 63 lines · Sam Ravnborg
Hi Masahiro.
Quoted 59 lines · Masahiro Yamada
Hi Nicholas,
(+CC: Sam Ravnborg)Quoted 9 lines · Nicholas Piggin
Excerpts from Masahiro Yamada's message of May 23, 2020 3:44 am:
Quoted 3 lines
+ Michael, and PPC ML.
They may know something about the reason of failure.
Because the linker can't put branch stubs within object code sections, so when you incrementally link them too large, the linker can't resolve branches into other object files.
Ah, you are right.
So, this is a problem not only for PPC but also for ARM (both 32 and 64 bit), etc.
ARM needs to insert a veneer to jump far.
Prior to thin archive, we could not compile ARCH=arm allyesconfig because
drivers/built-in.owas too large.This patch gets us back to the too large incremental object situation.
With my quick compile-testing, ARCH=arm allyesconfig
and ARCH=arm64 allyesconfig are broken.Quoted 8 lines
This is why we added incremental linking in the first place. I suppose it could be made conditional for platforms that can use this optimization.
What'd be really nice is if we could somehow build and link kallsyms without relinking everything twice, and if we could do section mismatch analysis without making that vmlinux.o as well. I had a few ideas but not enough time to do much work on it.
Right, kallsyms links 3 times. (not twice)
Hmm, I think Sami's main motivation is Clang LTO.
LTO is very time-consuming.
So, the android common kernel implements Clang LTO in the pre modpost stage:1) LTO against vmlinux.o
2) modpost against vmlinux.o
Quoted 7 lines
Quoted 2 lines
3) Link vmlinux.o + kallsyms into vmlinux (this requires linking 3 times)
We have kallsyms we had to link three times because the linking increased the object a little in size so symbols did not match. The last time was added more or less only to check that we did have stable symbol addresses.
Usually vmlinux_link is invoked 3 times if CONFIG_KALLSYMS=y.
(kallsyms_step 1, kallsyms_step 2, and final vmlinux_link)
If the elf size does not match after kallsyms_step 2, kallsyms_step 3 is invoked.
So, 4 times including the extra check pass.
If CONFIG_DEBUG_INFO_BTF=y, vmlinux_link is invoked one more time.
So, linked 5 times at most.
Quoted 77 lines
All this predates LTO stuff which we only introduced later.
The reason for doing modpost on vmlinux.o was that we had cases where everything in
drivers/was fine but there was section mismatch references fromarch/*todrivers/*
This is back when there were much more drivers inarch/than what we have today.
And back then we also had much more to check ad we had cPU hotplug that could really cause section mismatches - this is no longer the case which is a good thing....
Quoted 16 lines
The following two commits.
I did not fully understand the background, though.I CC'ed Sam in case he may add some comments.
commit
85bd2fddd68e757da8e1af98f857f61a3c9ce647Author: Sam Ravnborg <[email protected]> Date: Mon Feb 26 15:33:52 2007 +0100kbuild: fix section mismatch check for vmlinux
vmlinux does not contain relocation entries which is used by the section mismatch checks. Reported by: Atsushi Nemoto <[email protected]>
Quoted 5 lines
Use the individual objects as inputs to overcome this limitation.
In modpost check the .o files and skip non-ELF files.Signed-off-by Sam Ravnborg <[email protected]>So we checked vmlinx - but vmlinx did have too much stripped away. so in reality nothing was checked.
To allow the warnings to be as precise as possible move the checks out to the indovidual .o files.
Sometimes the names was mangled a little so if warnigns was only reported on vmlinx level in could be difficult to track down the offender.
This would then also do the check on .o files that had all the relocation symbols rtequired.Quoted 13 lines
commit
741f98fe298a73c9d47ed53703c1279a29718581Author: Sam Ravnborg <[email protected]> Date: Tue Jul 17 10:54:06 2007 +0200kbuild: do section mismatch check on full vmlinux
Previously we did do the check on the .o files used to link vmlinux but that failed to find questionable references across the .o files.
Create a dedicated vmlinux.o file used only for section mismatch checks that uses the defualt linker script so section does not get renamed.Quoted 6 lines
The vmlinux.o may later be used as part of the the final link of vmlinux but for now it is used fo section mismatch only.
For a defconfig build this is instant but for an allyesconfig this add two minutes to a full build (that anyways takes ~2 hours).Signed-off-by Sam Ravnborg <[email protected]>But when we introduced check of the individual .o fiules we missed when the references spanned outside the .o files as explained previously. So included a link of vmlinx.o that did NOT drop the relocations so we could use it to check for the remaining section mismatch warnings.
Remember - back when we started this we had many hundred warnings and it was a fight to keep that number low.
But we also wanted to report as much as possible.
Quoted 8 lines
There was back then several discussions if this was really worth the effort. How much was gained from discarding the memory where the section mismatch warnigns was triggered.
In other words - how about just keeping the init code in memory so there were no illegal references anymore.
That is something that is maybe worth to consiuder again as we have even less memory we save by throwing away the init code.
But I think this is a topic for another mail thread.
I am not sure if we want to go as far as stop doing __init. I want to reuse memory after initialization.
Anyway, the section mismatch checks highly rely on REL or RELA.
The REL(A) sections do not exist in the final vmlinux, or is useless at least. So, it does not work for most of architectures.
If we use individual .o files, modpost cannot check function calls to a different object file.
So, the conclusion is we definitely need vmlinux.o for section mismatch checks.
--
Best Regards
Masahiro Yamada
Quoted 28 lines · Masahiro Yamada
Hi Nicholas,
(+CC: Sam Ravnborg)Quoted 9 lines · Nicholas Piggin
Excerpts from Masahiro Yamada's message of May 23, 2020 3:44 am:
Quoted 3 lines
+ Michael, and PPC ML.
They may know something about the reason of failure.
Because the linker can't put branch stubs within object code sections, so when you incrementally link them too large, the linker can't resolve branches into other object files.
Ah, you are right.
So, this is a problem not only for PPC
but also for ARM (both 32 and 64 bit), etc.ARM needs to insert a veneer to jump far.
Prior to thin archive, we could not compile
ARCH=arm allyesconfig becausedrivers/built-in.owas too large.
Quoted 6 lines
This patch gets us back to the too large
incremental object situation.With my quick compile-testing,
ARCH=arm allyesconfig
and ARCH=arm64 allyesconfig are broken.
Thanks for looking into this! Clang doesn't appear to have this issue with LTO because it always enables both -ffunction-sections and -fdata-sections. I confirmed that -ffunction-sections also fixes arm64 allyesconfig with this patch. While I'm fine with reusing vmlinux.o only with LTO, how would you feel about enabling -ffunction-sections in the kernel by default?
Sami
Quoted 37 lines · Sami Tolvanen
Quoted 28 lines · Masahiro Yamada
Hi Nicholas,
(+CC: Sam Ravnborg)Quoted 9 lines · Nicholas Piggin
Excerpts from Masahiro Yamada's message of May 23, 2020 3:44 am:
Quoted 3 lines
+ Michael, and PPC ML.
They may know something about the reason of failure.
Because the linker can't put branch stubs within object code sections, so when you incrementally link them too large, the linker can't resolve branches into other object files.
Ah, you are right.
So, this is a problem not only for PPC
but also for ARM (both 32 and 64 bit), etc.ARM needs to insert a veneer to jump far.
Prior to thin archive, we could not compile
ARCH=arm allyesconfig becausedrivers/built-in.owas too large.Quoted 6 lines
This patch gets us back to the too large
incremental object situation.With my quick compile-testing,
ARCH=arm allyesconfig
and ARCH=arm64 allyesconfig are broken.
Quoted 6 lines
Thanks for looking into this! Clang doesn't appear to have this issue with LTO because it always enables both -ffunction-sections and -fdata-sections. I confirmed that -ffunction-sections also fixes arm64 allyesconfig with this patch. While I'm fine with reusing vmlinux.o only with LTO, how would you feel about enabling -ffunction-sections in the kernel by default?
I am OK if it works.
Please do compile tests for some architectures. (especially, ARCH=powerpc defconfig, and ARCH=arm(64) allyesconfig)
Thank you.
Signature · 2 lines
Best Regards Masahiro Yamada