dmaengine: mediatek-cqdma: add dt-bindings and remove redundant queue
Subsystems (4)
PATCH v4 1/1 dmaengine: mediatek-cqdma: add dt-bindings and remove redundant queue
This patch set adds document the devicetree bindings for MediaTek Command-Queue DMA controller, and remove redundant queue structure, add dma-channel-mask for DMA capability and fix compatible.
Changes since v3:
- fix dt_binding_check errors
Changes since v2:
- add devicetree bindings for MediaTek Command-Queue DMA controller
Changes since v1:
- remove redundant queue structure
- fix wrong description and tags in the earlier patch
- add dma-channel-mask for DMA capability
- fix compatible for common
PATCH v4 1/4 dt-bindings: dmaengine: Add MediaTek Command-Queue DMA controller bindings
Document the devicetree bindings for MediaTek Command-Queue DMA controller which could be found on MT6779 SoC or other similar Mediatek SoCs.
--- .../devicetree/bindings/dma/mtk-cqdma.yaml | 100 +++++++++++++++++++++ 1 file changed, 100 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/mtk-cqdma.yaml
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +100 -0
@@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/mtk-cqdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Command-Queue DMA controller Device Tree Binding + +maintainers: + - EastL <[email protected]> + +description: + MediaTek Command-Queue DMA controller (CQDMA) on Mediatek SoC + is dedicated to memory-to-memory transfer through queue based + descriptor management. + +properties: + "#dma-cells": + minimum: 1 + # Should be enough + maximum: 255 + description: + Used to provide DMA controller specific information. + + compatible: + const: mediatek,cqdma + + reg: + minItems: 1 + maxItems: 255 + + interrupts: + minItems: 1 + maxItems: 255 + + clocks: + maxItems: 1 + + clock-names: + const: cqdma + + dma-channel-mask: + description: + Bitmask of available DMA channels in ascending order that are + not reserved by firmware and are available to the + kernel. i.e. first channel corresponds to LSB. + The first item in the array is for channels 0-31, the second is for + channels 32-63, etc. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 1 + # Should be enough + maxItems: 255 + + dma-channels: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Number of DMA channels supported by the controller. + + dma-requests: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Number of DMA request signals supported by the controller. + +required: + - "#dma-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - dma-channel-mask + - dma-channels + - dma-requests + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt6779-clk.h> + cqdma: dma-controller@10212000 { + compatible = "mediatek,cqdma"; + reg = <0 0x10212000 0 0x80>, + <0 0x10212080 0 0x80>, + <0 0x10212100 0 0x80>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg_ao CLK_INFRA_CQ_DMA>; + clock-names = "cqdma"; + dma-channel-mask = <63>; + dma-channels = <3>; + dma-requests = <32>; + #dma-cells = <1>; + }; + +...
Signature · 1 line
1.9.1
Rob Herring
maintainerRe: [PATCH v4 1/4] dt-bindings: dmaengine: Add MediaTek Command-Queue DMA controller bindings
Quoted 4 lines · EastL
Document the devicetree bindings for MediaTek Command-Queue DMA controller which could be found on MT6779 SoC or other similar Mediatek SoCs.
Signed-off-by EastL <[email protected]>
Need a full name.
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml line 1
Quoted 12 lines
--- .../devicetree/bindings/dma/mtk-cqdma.yaml | 100 +++++++++++++++++++++ 1 file changed, 100 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/mtk-cqdma.yamlDocumentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +1
-0@@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0
Dual license new bindings:
(GPL-2.0-only OR BSD-2-Clause)
Quoted 5 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +5
-0+%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/mtk-cqdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# +
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml line 16
Quoted 10 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +10
-0+title: MediaTek Command-Queue DMA controller Device Tree Binding + +maintainers: + - EastL <[email protected]> + +description: + MediaTek Command-Queue DMA controller (CQDMA) on Mediatek SoC + is dedicated to memory-to-memory transfer through queue based + descriptor management. +
Need a $ref to dma-controller.yaml
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml line 26
Quoted 10 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +10
-0+properties: + "#dma-cells": + minimum: 1 + # Should be enough + maximum: 255 + description: + Used to provide DMA controller specific information. + + compatible: + const: mediatek,cqdma
Needs SoC specific compatible string(s).
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml line 30
Quoted 4 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +4
-0+ + reg: + minItems: 1 + maxItems: 255
You can have 255 register regions?
You need to define what each region is if more than 1.
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml line 34
Quoted 4 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +4
-0+ + interrupts: + minItems: 1 + maxItems: 255
255 interrupts?
Quoted 10 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +10
-0+ + clocks: + maxItems: 1 + + clock-names: + const: cqdma + + dma-channel-mask: + description: + Bitmask of available DMA channels in ascending order that are
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml line 54
Quoted 10 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +10
-0+ not reserved by firmware and are available to the + kernel. i.e. first channel corresponds to LSB. + The first item in the array is for channels 0-31, the second is for + channels 32-63, etc. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 1 + # Should be enough + maxItems: 255
This already has a definition in dma-common.yaml. Don't copy-n-paste it. Just add any constraints you have. Like what is the max number of channels?
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml line 64
Quoted 10 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +10
-0+ + dma-channels: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Number of DMA channels supported by the controller. + + dma-requests: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Number of DMA request signals supported by the controller.
Same comment on these 2.
Quoted 14 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +14
-0+ +required: + - "#dma-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - dma-channel-mask + - dma-channels + - dma-requests + +additionalProperties: false +
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml line 88
Quoted 10 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +10
-0+examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt6779-clk.h> + cqdma: dma-controller@10212000 { + compatible = "mediatek,cqdma"; + reg = <0 0x10212000 0 0x80>, + <0 0x10212080 0 0x80>, + <0 0x10212100 0 0x80>;
Examples default to 1 cell each for address and size.
Quoted 14 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +12
-0+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg_ao CLK_INFRA_CQ_DMA>; + clock-names = "cqdma"; + dma-channel-mask = <63>; + dma-channels = <3>; + dma-requests = <32>; + #dma-cells = <1>; + }; + +...Signature · 1 line
1.9.1
Re: [PATCH v4 1/4] dt-bindings: dmaengine: Add MediaTek Command-Queue DMA controller bindings
Quoted 7 lines · Rob Herring
Quoted 4 lines · EastL
Document the devicetree bindings for MediaTek Command-Queue DMA controller which could be found on MT6779 SoC or other similar Mediatek SoCs.
Signed-off-by EastL <[email protected]>Need a full name
OK
Quoted 17 lines
.
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml line 1
Quoted 12 lines
--- .../devicetree/bindings/dma/mtk-cqdma.yaml | 100 +++++++++++++++++++++ 1 file changed, 100 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/mtk-cqdma.yamlDocumentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +1
-0@@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0Dual license new bindings:
Quoted 1 line
(GPL-2.0-only OR BSD-2-Clause)
OK
Quoted 10 lines
Quoted 10 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +9
-0+%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/mtk-cqdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Command-Queue DMA controller Device Tree Binding + +maintainers: + - EastL <[email protected]>
Quoted 8 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml line 16
Quoted 6 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +6
-0+ +description: + MediaTek Command-Queue DMA controller (CQDMA) on Mediatek SoC + is dedicated to memory-to-memory transfer through queue based + descriptor management. +Need a $ref to
dma-controller.yaml
OK
Quoted 13 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml line 26
Quoted 11 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +10
-0+properties: + "#dma-cells": + minimum: 1 + # Should be enough + maximum: 255 + description: + Used to provide DMA controller specific information. + + compatible: + const: mediatek,cqdmaNeeds SoC specific compatible string(s).
OK
Quoted 7 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml line 30
Quoted 5 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +4
-0+ + reg: + minItems: 1 + maxItems: 255You can have 255 register regions?
No, I'll fix maxItems to 5
Quoted 9 lines
You need to define what each region is if more than 1.
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml line 34
Quoted 4 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +4
-0+ + interrupts: + minItems: 1 + maxItems: 255255 interrupts?
the same, 5 interripts.
Quoted 17 lines
Quoted 17 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +16
-0+ + clocks: + maxItems: 1 + + clock-names: + const: cqdma + + dma-channel-mask: + description: + Bitmask of available DMA channels in ascending order that are + not reserved by firmware and are available to the + kernel. i.e. first channel corresponds to LSB. + The first item in the array is for channels 0-31, the second is for + channels 32-63, etc. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array
Quoted 8 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml line 54
Quoted 4 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +4
-0+ items: + minItems: 1 + # Should be enough + maxItems: 255This already has a definition in
dma-common.yaml. Don't copy-n-paste it. Just add any constraints you have. Like what is the max number of channels?
OK, the max channel number is 5, I'll fix it on next version.
Quoted 13 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml line 64
Quoted 11 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +10
-0+ + dma-channels: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Number of DMA channels supported by the controller. + + dma-requests: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Number of DMA request signals supported by the controller.Same comment on these 2.
OK
Quoted 19 lines
Quoted 19 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +18
-0+ +required: + - "#dma-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - dma-channel-mask + - dma-channels + - dma-requests + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h>
Quoted 8 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml line 88
Quoted 6 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +6
-0+ #include <dt-bindings/clock/mt6779-clk.h> + cqdma: dma-controller@10212000 { + compatible = "mediatek,cqdma"; + reg = <0 0x10212000 0 0x80>, + <0 0x10212080 0 0x80>, + <0 0x10212100 0 0x80>;Examples default to 1 cell each for address and size.
OK
Quoted 15 lines
Quoted 15 lines
Documentation/devicetree/bindings/dma/mtk-cqdma.yaml new file +12
-0+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg_ao CLK_INFRA_CQ_DMA>; + clock-names = "cqdma"; + dma-channel-mask = <63>; + dma-channels = <3>; + dma-requests = <32>; + #dma-cells = <1>; + }; + +...Signature · 1 line
1.9.1
PATCH v4 2/4 dmaengine: mediatek-cqdma: remove redundant queue structure
In reply to EastLThis patch introduces active_vdec to indicate the virtual descriptor under processing by the CQDMA dmaengine, and simplify the control logic by removing redundant queue structure, tasklets, and completion management.
--- drivers/dma/mediatek/mtk-cqdma.c | 383 ++++++++++----------------------------- 1 file changed, 93 insertions(+), 290 deletions(-)
drivers/dma/mediatek/mtk-cqdma.c +93 -290
@@ -22,6 +22,7 @@#include <linux/of_dma.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/preempt.h> #include <linux/refcount.h> #include <linux/slab.h>
@@ -47,7 +48,6 @@#define MTK_CQDMA_SRC 0x1c#define MTK_CQDMA_DST 0x20#define MTK_CQDMA_LEN1 0x24 -#define MTK_CQDMA_LEN2 0x28#define MTK_CQDMA_SRC2 0x60#define MTK_CQDMA_DST2 0x64
@@ -69,45 +69,32 @@* descriptor (CVD) * @vd: An instance for struct virt_dma_desc * @len: The total data size device wants to move -* @residue: The remaining data size device will move * @dest: The destination address device wants to move to * @src: The source address device wants to move from * @ch: The pointer to the corresponding dma channel -* @node: The lise_head struct to build link-list for VDs -* @parent: The pointer to the parent CVD */ struct mtk_cqdma_vdesc {struct virt_dma_desc vd;size_t len; -size_t residue;dma_addr_t dest;dma_addr_t src;struct dma_chan *ch; - -struct list_head node; -struct mtk_cqdma_vdesc *parent; };/** * struct mtk_cqdma_pchan - The struct holding info describing physical * channel (PC) -* @queue: Queue for the PDs issued to this PC +* @active_vdesc: The pointer to the CVD which is under processing * @base: The mapped register I/O base of this PC * @irq: The IRQ that this PC are using * @refcnt: Track how many VCs are using this PC -* @tasklet: Tasklet for this PC * @lock: Lock protect agaisting multiple VCs access PC */ struct mtk_cqdma_pchan { -struct list_head queue; +struct mtk_cqdma_vdesc *active_vdesc;void __iomem *base;u32 irq; -refcount_t refcnt; - -struct tasklet_struct tasklet; - -/* lock to protect PC */ spinlock_t lock; };
@@ -116,14 +103,11 @@ struct mtk_cqdma_pchan {* channel (VC) * @vc: An instance for struct virt_dma_chan * @pc: The pointer to the underlying PC -* @issue_completion: The wait for all issued descriptors completited -* @issue_synchronize: Bool indicating channel synchronization starts */ struct mtk_cqdma_vchan {struct virt_dma_chan vc;struct mtk_cqdma_pchan *pc; -struct completion issue_completion; -bool issue_synchronize; +struct completion cmp; };/**
@@ -202,22 +186,22 @@ static void mtk_cqdma_vdesc_free(struct virt_dma_desc *vd)kfree (to_cqdma_vdesc (vd)); } -static int mtk_cqdma_poll_engine_done (struct mtk_cqdma_pchan *pc,bool atomic) +static int mtk_cqdma_poll_engine_done (struct mtk_cqdma_pchan *pc) {u32 status =0 ; -if (!atomic) +if (in_task ()) +return readl_poll_timeout_atomic (pc->base +MTK_CQDMA_EN , + status, + !(status &MTK_CQDMA_EN_BIT ), +MTK_CQDMA_USEC_POLL , +MTK_CQDMA_TIMEOUT_POLL ); +else return readl_poll_timeout (pc->base +MTK_CQDMA_EN , status, !(status &MTK_CQDMA_EN_BIT ),MTK_CQDMA_USEC_POLL ,MTK_CQDMA_TIMEOUT_POLL ); - -return readl_poll_timeout_atomic (pc->base +MTK_CQDMA_EN , - status, - !(status &MTK_CQDMA_EN_BIT ), -MTK_CQDMA_USEC_POLL , -MTK_CQDMA_TIMEOUT_POLL ); }static int mtk_cqdma_hard_reset (struct mtk_cqdma_pchan *pc)
@@ -225,20 +209,17 @@ static int mtk_cqdma_hard_reset(struct mtk_cqdma_pchan *pc)mtk_dma_set (pc,MTK_CQDMA_RESET ,MTK_CQDMA_HARD_RST_BIT );mtk_dma_clr (pc,MTK_CQDMA_RESET ,MTK_CQDMA_HARD_RST_BIT ); -return mtk_cqdma_poll_engine_done (pc, true); +return mtk_cqdma_poll_engine_done (pc); }static void mtk_cqdma_start (struct mtk_cqdma_pchan *pc,struct mtk_cqdma_vdesc *cvd) { -/* wait for the previous transaction done */ -if (mtk_cqdma_poll_engine_done (pc, true) <0 ) -dev_err (cqdma2dev (to_cqdma_dev (cvd->ch)),"cqdma wait transaction timeout\n" ); -/* warm reset the dma engine for the new transaction */ mtk_dma_set (pc,MTK_CQDMA_RESET ,MTK_CQDMA_WARM_RST_BIT ); -if (mtk_cqdma_poll_engine_done (pc, true) <0 ) -dev_err (cqdma2dev (to_cqdma_dev (cvd->ch)),"cqdma warm reset timeout\n" ); +if (mtk_cqdma_poll_engine_done (pc) <0 ) +dev_err (cqdma2dev (to_cqdma_dev (cvd->ch)), +"cqdma warm reset timeout\n" );/* setup the source */ mtk_dma_set (pc,MTK_CQDMA_SRC , cvd->src &MTK_CQDMA_ADDR_LIMIT );
@@ -257,7 +238,8 @@ static void mtk_cqdma_start(struct mtk_cqdma_pchan *pc,#endif /* setup the length */ -mtk_dma_set (pc,MTK_CQDMA_LEN1 , cvd->len); +mtk_dma_set (pc,MTK_CQDMA_LEN1 , (cvd->len <MTK_CQDMA_MAX_LEN ) ? + cvd->len :MTK_CQDMA_MAX_LEN );/* start dma engine */ mtk_dma_set (pc,MTK_CQDMA_EN ,MTK_CQDMA_EN_BIT );
@@ -265,30 +247,17 @@ static void mtk_cqdma_start(struct mtk_cqdma_pchan *pc,static void mtk_cqdma_issue_vchan_pending (struct mtk_cqdma_vchan *cvc) { -struct virt_dma_desc *vd, *vd2; +struct virt_dma_desc *vd;struct mtk_cqdma_pchan *pc = cvc->pc; -struct mtk_cqdma_vdesc *cvd; -bool trigger_engine = false;lockdep_assert_held (&cvc->vc.lock);lockdep_assert_held (&pc->lock); -list_for_each_entry_safe (vd, vd2, &cvc->vc.desc_issued, node) { -/* need to trigger dma engine if PC's queue is empty */ -if (list_empty (&pc->queue)) - trigger_engine = true; - - cvd =to_cqdma_vdesc (vd); - -/* add VD into PC's queue */ -list_add_tail (&cvd->node, &pc->queue); - -/* start the dma engine */ -if (trigger_engine) -mtk_cqdma_start (pc, cvd); + vd =vchan_next_desc (&cvc->vc); -/* remove VD from list desc_issued */ -list_del (&vd->node); +if (vd && !pc->active_vdesc) { + pc->active_vdesc =to_cqdma_vdesc (vd); +mtk_cqdma_start (pc, pc->active_vdesc); } }
@@ -298,100 +267,55 @@ static void mtk_cqdma_issue_vchan_pending(struct mtk_cqdma_vchan *cvc)*/ static bool mtk_cqdma_is_vchan_active (struct mtk_cqdma_vchan *cvc) { -struct mtk_cqdma_vdesc *cvd; - -list_for_each_entry (cvd, &cvc->pc->queue, node) -if (cvc ==to_cqdma_vchan (cvd->ch)) -return true; - -return false; +return (!cvc->pc->active_vdesc) ? false : + (cvc ==to_cqdma_vchan (cvc->pc->active_vdesc->ch)); } -/* -* return the pointer of the CVD that is just consumed by the PC -*/ -static struct mtk_cqdma_vdesc -*mtk_cqdma_consume_work_queue (struct mtk_cqdma_pchan *pc) +static void mtk_cqdma_complete_vdesc (struct mtk_cqdma_pchan *pc) {struct mtk_cqdma_vchan *cvc; -struct mtk_cqdma_vdesc *cvd, *ret =NULL ; - -/* consume a CVD from PC's queue */ - cvd =list_first_entry_or_null (&pc->queue, - struct mtk_cqdma_vdesc, node); -if (unlikely (!cvd || !cvd->parent)) -return NULL ; +struct mtk_cqdma_vdesc *cvd; +struct virt_dma_desc *vd; +size_t tlen; + cvd = pc->active_vdesc; cvc =to_cqdma_vchan (cvd->ch); - ret = cvd; - -/* update residue of the parent CVD */ - cvd->parent->residue -= cvd->len; -/* delete CVD from PC's queue */ -list_del (&cvd->node); + tlen = (cvd->len <MTK_CQDMA_MAX_LEN ) ? cvd->len :MTK_CQDMA_MAX_LEN ; + cvd->len -= tlen; + cvd->src += tlen; + cvd->dest += tlen;spin_lock (&cvc->vc.lock); -/* check whether all the child CVDs completed */ -if (!cvd->parent->residue) { -/* add the parent VD into list desc_completed */ -vchan_cookie_complete (&cvd->parent->vd); +/* check whether the VD completed */ +if (!cvd->len) { +/* delete VD from desc_issued */ +list_del (&cvd->vd.node); -/* setup completion if this VC is under synchronization */ -if (cvc->issue_synchronize && !mtk_cqdma_is_vchan_active (cvc)) { -complete (&cvc->issue_completion); - cvc->issue_synchronize = false; - } - } - -spin_unlock (&cvc->vc.lock); +/* add the VD into list desc_completed */ +vchan_cookie_complete (&cvd->vd); -/* start transaction for next CVD in the queue */ - cvd =list_first_entry_or_null (&pc->queue, - struct mtk_cqdma_vdesc, node); -if (cvd) -mtk_cqdma_start (pc, cvd); - -return ret; -} - -static void mtk_cqdma_tasklet_cb (unsigned long data) -{ -struct mtk_cqdma_pchan *pc = (struct mtk_cqdma_pchan *)data; -struct mtk_cqdma_vdesc *cvd =NULL ; -unsigned long flags; - -spin_lock_irqsave (&pc->lock, flags); -/* consume the queue */ - cvd =mtk_cqdma_consume_work_queue (pc); -spin_unlock_irqrestore (&pc->lock, flags); - -/* submit the next CVD */ -if (cvd) { -dma_run_dependencies (&cvd->vd.tx); - -/* -* free child CVD after completion. -* the parent CVD would be freeed with desc_free by user. -*/ -if (cvd->parent != cvd) -kfree (cvd); +/* get the next active VD */ + vd =vchan_next_desc (&cvc->vc); + pc->active_vdesc = (!vd) ?NULL :to_cqdma_vdesc (vd); } -/* re-enable interrupt before leaving tasklet */ -enable_irq (pc->irq); +/* start the next transaction */ +if (pc->active_vdesc) +mtk_cqdma_start (pc, pc->active_vdesc); + +spin_unlock (&cvc->vc.lock); }static irqreturn_t mtk_cqdma_irq (int irq,void *devid) {struct mtk_cqdma_device *cqdma = devid;irqreturn_t ret =IRQ_NONE ; -bool schedule_tasklet = false;u32 i;/* clear interrupt flags for each PC */ -for (i =0 ; i < cqdma->dma_channels; ++i, schedule_tasklet = false) { +for (i =0 ; i < cqdma->dma_channels; ++i) {spin_lock (&cqdma->pc[i]->lock);if (mtk_dma_read (cqdma->pc[i],MTK_CQDMA_INT_FLAG ) &MTK_CQDMA_INT_FLAG_BIT ) {
@@ -399,72 +323,21 @@ static irqreturn_t mtk_cqdma_irq(int irq, void *devid)mtk_dma_clr (cqdma->pc[i],MTK_CQDMA_INT_FLAG ,MTK_CQDMA_INT_FLAG_BIT ); - schedule_tasklet = true; +mtk_cqdma_complete_vdesc (cqdma->pc[i]); + ret =IRQ_HANDLED ; }spin_unlock (&cqdma->pc[i]->lock); - -if (schedule_tasklet) { -/* disable interrupt */ -disable_irq_nosync (cqdma->pc[i]->irq); - -/* schedule the tasklet to handle the transactions */ -tasklet_schedule (&cqdma->pc[i]->tasklet); - } }return ret; } -static struct virt_dma_desc *mtk_cqdma_find_active_desc (struct dma_chan *c, -dma_cookie_t cookie) -{ -struct mtk_cqdma_vchan *cvc =to_cqdma_vchan (c); -struct virt_dma_desc *vd; -unsigned long flags; - -spin_lock_irqsave (&cvc->pc->lock, flags); -list_for_each_entry (vd, &cvc->pc->queue, node) -if (vd->tx.cookie == cookie) { -spin_unlock_irqrestore (&cvc->pc->lock, flags); -return vd; - } -spin_unlock_irqrestore (&cvc->pc->lock, flags); - -list_for_each_entry (vd, &cvc->vc.desc_issued, node) -if (vd->tx.cookie == cookie) -return vd; - -return NULL ; -} -static enum dma_status mtk_cqdma_tx_status (struct dma_chan *c,dma_cookie_t cookie,struct dma_tx_state *txstate) { -struct mtk_cqdma_vchan *cvc =to_cqdma_vchan (c); -struct mtk_cqdma_vdesc *cvd; -struct virt_dma_desc *vd; -enum dma_status ret; -unsigned long flags; -size_t bytes =0 ; - - ret =dma_cookie_status (c, cookie, txstate); -if (ret ==DMA_COMPLETE || !txstate) -return ret; - -spin_lock_irqsave (&cvc->vc.lock, flags); - vd =mtk_cqdma_find_active_desc (c, cookie); -spin_unlock_irqrestore (&cvc->vc.lock, flags); - -if (vd) { - cvd =to_cqdma_vdesc (vd); - bytes = cvd->residue; - } - -dma_set_residue (txstate, bytes); - -return ret; +return dma_cookie_status (c, cookie, txstate); }static void mtk_cqdma_issue_pending (struct dma_chan *c)
@@ -473,13 +346,17 @@ static void mtk_cqdma_issue_pending(struct dma_chan *c)unsigned long pc_flags;unsigned long vc_flags; -/* acquire PC's lock before VS's lock for lock dependency in tasklet */ +/* acquire PC's lock before VC's lock for lock dependency in ISR */ spin_lock_irqsave (&cvc->pc->lock, pc_flags);spin_lock_irqsave (&cvc->vc.lock, vc_flags); +init_completion (&cvc->cmp); +if (vchan_issue_pending (&cvc->vc))mtk_cqdma_issue_vchan_pending (cvc); +complete (&cvc->cmp); +spin_unlock_irqrestore (&cvc->vc.lock, vc_flags);spin_unlock_irqrestore (&cvc->pc->lock, pc_flags); }
@@ -488,125 +365,50 @@ static void mtk_cqdma_issue_pending(struct dma_chan *c) mtk_cqdma_prep_dma_memcpy(struct dma_chan *c, dma_addr_t dest, dma_addr_t src, size_t len, unsigned long flags) { - struct mtk_cqdma_vdesc **cvd; -struct dma_async_tx_descriptor *tx =NULL , *prev_tx =NULL ; -size_t i, tlen, nr_vd; - -/* -* In the case that trsanction length is larger than the -* DMA engine supports, a single memcpy transaction needs -* to be separated into several DMA transactions. -* Each DMA transaction would be described by a CVD, -* and the first one is referred as the parent CVD, -* while the others are child CVDs. -* The parent CVD's tx descriptor is the only tx descriptor -* returned to the DMA user, and it should not be completed -* until all the child CVDs completed. -*/ - nr_vd =DIV_ROUND_UP (len,MTK_CQDMA_MAX_LEN ); - cvd =kcalloc (nr_vd,sizeof (*cvd),GFP_NOWAIT ); + struct mtk_cqdma_vdesc *cvd; + + cvd =kzalloc (sizeof (*cvd),GFP_NOWAIT );if (!cvd)return NULL ; -for (i =0 ; i < nr_vd; ++i) { - cvd[i] =kzalloc (sizeof (*cvd[i]),GFP_NOWAIT ); -if (!cvd[i]) { -for (; i >0 ; --i) -kfree (cvd[i -1 ]); -return NULL ; - } - -/* setup dma channel */ - cvd[i]->ch = c; - -/* setup sourece, destination, and length */ - tlen = (len >MTK_CQDMA_MAX_LEN ) ?MTK_CQDMA_MAX_LEN : len; - cvd[i]->len = tlen; - cvd[i]->src = src; - cvd[i]->dest = dest; - -/* setup tx descriptor */ - tx =vchan_tx_prep (to_virt_chan (c), &cvd[i]->vd, flags); - tx->next =NULL ; +/* setup dma channel */ + cvd->ch = c; -if (!i) { - cvd[0 ]->residue = len; - }else { - prev_tx->next = tx; - cvd[i]->residue = tlen; - } - - cvd[i]->parent = cvd[0 ]; - -/* update the src, dest, len, prev_tx for the next CVD */ - src += tlen; - dest += tlen; - len -= tlen; - prev_tx = tx; - } +/* setup sourece, destination, and length */ + cvd->len = len; + cvd->src = src; + cvd->dest = dest; -return &cvd[0 ]->vd.tx; +return vchan_tx_prep (to_virt_chan (c), &cvd->vd, flags); } -static void mtk_cqdma_free_inactive_desc (struct dma_chan *c) -{ -struct virt_dma_chan *vc =to_virt_chan (c); -unsigned long flags; -LIST_HEAD (head); - -/* -* set desc_allocated, desc_submitted, -* and desc_issued as the candicates to be freed -*/ -spin_lock_irqsave (&vc->lock, flags); -list_splice_tail_init (&vc->desc_allocated, &head); -list_splice_tail_init (&vc->desc_submitted, &head); -list_splice_tail_init (&vc->desc_issued, &head); -spin_unlock_irqrestore (&vc->lock, flags); - -/* free descriptor lists */ -vchan_dma_desc_free_list (vc, &head); -} - -static void mtk_cqdma_free_active_desc (struct dma_chan *c) +static int mtk_cqdma_terminate_all (struct dma_chan *c) {struct mtk_cqdma_vchan *cvc =to_cqdma_vchan (c); -bool sync_needed = false; +struct virt_dma_chan *vc =to_virt_chan (c);unsigned long pc_flags;unsigned long vc_flags; +LIST_HEAD (head); + +/* wait for the VC to be inactive */ +if (!wait_for_completion_timeout (&cvc->cmp,msecs_to_jiffies (3000 ))) +return -EAGAIN ;/* acquire PC's lock first due to lock dependency in dma ISR */ spin_lock_irqsave (&cvc->pc->lock, pc_flags);spin_lock_irqsave (&cvc->vc.lock, vc_flags); -/* synchronization is required if this VC is active */ -if (mtk_cqdma_is_vchan_active (cvc)) { - cvc->issue_synchronize = true; - sync_needed = true; - } +/* get VDs from lists */ +vchan_get_all_descriptors (vc, &head); + +/* free all the VDs */ +vchan_dma_desc_free_list (vc, &head);spin_unlock_irqrestore (&cvc->vc.lock, vc_flags);spin_unlock_irqrestore (&cvc->pc->lock, pc_flags); -/* waiting for the completion of this VC */ -if (sync_needed) -wait_for_completion (&cvc->issue_completion); - -/* free all descriptors in list desc_completed */ vchan_synchronize (&cvc->vc); -WARN_ONCE (!list_empty (&cvc->vc.desc_completed), -"Desc pending still in list desc_completed\n" ); -} - -static int mtk_cqdma_terminate_all (struct dma_chan *c) -{ -/* free descriptors not processed yet by hardware */ -mtk_cqdma_free_inactive_desc (c); - -/* free descriptors being processed by hardware */ -mtk_cqdma_free_active_desc (c); -return 0 ; }
@@ -618,7 +420,7 @@ static int mtk_cqdma_alloc_chan_resources(struct dma_chan *c)u32 i, min_refcnt =U32_MAX , refcnt;unsigned long flags; -/* allocate PC with the minimun refcount */ +/* allocate PC with the minimum refcount */ for (i =0 ; i < cqdma->dma_channels; ++i) { refcnt =refcount_read (&cqdma->pc[i]->refcnt);if (refcnt < min_refcnt) {
@@ -671,8 +473,9 @@ static void mtk_cqdma_free_chan_resources(struct dma_chan *c)mtk_dma_set (cvc->pc,MTK_CQDMA_FLUSH ,MTK_CQDMA_FLUSH_BIT );/* wait for the completion of flush operation */ -if (mtk_cqdma_poll_engine_done (cvc->pc, true) <0 ) -dev_err (cqdma2dev (to_cqdma_dev (c)),"cqdma flush timeout\n" ); +if (mtk_cqdma_poll_engine_done (cvc->pc) <0 ) +dev_err (cqdma2dev (to_cqdma_dev (c)), +"cqdma flush timeout\n" );/* clear the flush bit and interrupt flag */ mtk_dma_clr (cvc->pc,MTK_CQDMA_FLUSH ,MTK_CQDMA_FLUSH_BIT );
@@ -816,10 +619,18 @@ static int mtk_cqdma_probe(struct platform_device *pdev)if (!cqdma->pc[i])return -ENOMEM ; -INIT_LIST_HEAD (&cqdma->pc[i]->queue); + cqdma->pc[i]->active_vdesc =NULL ;spin_lock_init (&cqdma->pc[i]->lock);refcount_set (&cqdma->pc[i]->refcnt,0 ); - cqdma->pc[i]->base =devm_platform_ioremap_resource (pdev, i); + + res =platform_get_resource (pdev,IORESOURCE_MEM , i); +if (!res) { +dev_err (&pdev->dev,"No mem resource for %s\n" , +dev_name (&pdev->dev)); +return -EINVAL ; + } + + cqdma->pc[i]->base =devm_ioremap_resource (&pdev->dev, res);if (IS_ERR (cqdma->pc[i]->base))return PTR_ERR (cqdma->pc[i]->base);
@@ -852,7 +663,6 @@ static int mtk_cqdma_probe(struct platform_device *pdev) vc = &cqdma->vc[i]; vc->vc.desc_free = mtk_cqdma_vdesc_free;vchan_init (&vc->vc, dd); -init_completion (&vc->issue_completion); } err =dma_async_device_register (dd);
@@ -876,11 +686,6 @@ static int mtk_cqdma_probe(struct platform_device *pdev)platform_set_drvdata (pdev, cqdma); -/* initialize tasklet for each PC */ -for (i =0 ; i < cqdma->dma_channels; ++i) -tasklet_init (&cqdma->pc[i]->tasklet, mtk_cqdma_tasklet_cb, - (unsigned long )cqdma->pc[i]); -dev_info (&pdev->dev,"MediaTek CQDMA driver registered\n" );return 0 ;
@@ -915,8 +720,6 @@ static int mtk_cqdma_remove(struct platform_device *pdev)/* Waits for any pending IRQ handlers to complete */ synchronize_irq (cqdma->pc[i]->irq); - -tasklet_kill (&cqdma->pc[i]->tasklet); }/* disable hardware */
Signature · 5 lines
1.9.1 _______________________________________________ Linux-mediatek mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-mediatek
PATCH v4 3/4 dmaengine: mediatek-cqdma: fix compatible
In reply to EastLThis patch fixes mediatek-cqdma compatible to common.
--- drivers/dma/mediatek/mtk-cqdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/dma/mediatek/mtk-cqdma.c +1 -1
@@ -544,7 +544,7 @@ static void mtk_cqdma_hw_deinit(struct mtk_cqdma_device *cqdma) }static const struct of_device_id mtk_cqdma_match[] = { - { .compatible ="mediatek,mt6765-cqdma" }, + { .compatible ="mediatek,cqdma" }, {/* sentinel */ } };MODULE_DEVICE_TABLE (of, mtk_cqdma_match);
Signature · 1 line
1.9.1
Matthias Brugger
maintainerRe: [PATCH v4 3/4] dmaengine: mediatek-cqdma: fix compatible
Quoted 12 lines · EastL
This patch fixes mediatek-cqdma compatible to common.
Signed-off-by EastL <[email protected]>--- drivers/dma/mediatek/mtk-cqdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/dma/mediatek/mtk-cqdma.c +0
-0
drivers/dma/mediatek/mtk-cqdma.c static void mtk_cqdma_hw_deinit(struct mtk_cqdma_device *cqdma) · line 547
Quoted 5 lines
drivers/dma/mediatek/mtk-cqdma.c +1
-1@@ -544,7 +544,7 @@ static void mtk_cqdma_hw_deinit(struct mtk_cqdma_device *cqdma) }static const struct of_device_id mtk_cqdma_match[] = { - { .compatible ="mediatek,mt6765-cqdma" }, + { .compatible ="mediatek,cqdma" },
We can't just delete and old compatible. If other cqdma IP blocks are the same as mt6795, we should instead add entries in the binding description with fallback compatible. For example for mt6779 the DTS would look like this:
compatible = "mediatek,mt6779-cqdma", "mediatek,mt6765-cqdma";
This way we the kernel will take care to bind the device against the driver with mt7665-cqdma, but leaves us the posibillity to add any changes to the driver in the future if we find some bugs/features for mt6779 that are not present in mt6765.
Regards,
Matthias
Quoted 4 lines
drivers/dma/mediatek/mtk-cqdma.c +0
-0{/* sentinel */ } };MODULE_DEVICE_TABLE (of, mtk_cqdma_match);
Re: [PATCH v4 3/4] dmaengine: mediatek-cqdma: fix compatible
Quoted 25 lines · Matthias Brugger
Quoted 12 lines · EastL
This patch fixes mediatek-cqdma compatible to common.
Signed-off-by EastL <[email protected]>--- drivers/dma/mediatek/mtk-cqdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/dma/mediatek/mtk-cqdma.c +0
-0drivers/dma/mediatek/mtk-cqdma.c static void mtk_cqdma_hw_deinit(struct mtk_cqdma_device *cqdma) · line 547
Quoted 5 lines
drivers/dma/mediatek/mtk-cqdma.c +1
-1@@ -544,7 +544,7 @@ static void mtk_cqdma_hw_deinit(struct mtk_cqdma_device *cqdma) }static const struct of_device_id mtk_cqdma_match[] = { - { .compatible ="mediatek,mt6765-cqdma" }, + { .compatible ="mediatek,cqdma" },We can't just delete and old compatible. If other cqdma IP blocks are the same as mt6795, we should instead add entries in the binding description with fallback compatible. For example for mt6779 the DTS would look like this:
compatible = "mediatek,mt6779-cqdma", "mediatek,mt6765-cqdma";
Quoted 11 lines
This way we the kernel will take care to bind the device against the driver with mt7665-cqdma, but leaves us the posibillity to add any changes to the driver in the future if we find some bugs/features for mt6779 that are not present in mt6765.
Regards,
MatthiasQuoted 4 lines
drivers/dma/mediatek/mtk-cqdma.c +0
-0{/* sentinel */ } };MODULE_DEVICE_TABLE (of, mtk_cqdma_match);
OK, Can I add a common compatible? Like this
static const struct of_device_id mtk_cqdma_match[] = { { .compatible = "mediatek,mt6765-cqdma" },
{ .compatible = "mediatek,common-cqdma" },
Regards,
EastL
PATCH v4 4/4 dmaengine: mediatek-cqdma: add dma mask for capability
In reply to EastLThis patch add dma mask for capability.
--- drivers/dma/mediatek/mtk-cqdma.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
drivers/dma/mediatek/mtk-cqdma.c +13 -0
@@ -117,6 +117,7 @@ struct mtk_cqdma_vchan {* @clk: The clock that device internal is using * @dma_requests: The number of VCs the device supports to * @dma_channels: The number of PCs the device supports to +* @dma_mask: A mask for DMA capability * @vc: The pointer to all available VCs * @pc: The pointer to all the underlying PCs */
@@ -126,6 +127,7 @@ struct mtk_cqdma_device {u32 dma_requests;u32 dma_channels; +u32 dma_mask;struct mtk_cqdma_vchan *vc;struct mtk_cqdma_pchan **pc; };
@@ -549,6 +551,7 @@ static void mtk_cqdma_hw_deinit(struct mtk_cqdma_device *cqdma) };MODULE_DEVICE_TABLE (of, mtk_cqdma_match); +static u64 cqdma_dmamask;static int mtk_cqdma_probe (struct platform_device *pdev) {struct mtk_cqdma_device *cqdma;
@@ -607,6 +610,16 @@ static int mtk_cqdma_probe(struct platform_device *pdev) cqdma->dma_channels =MTK_CQDMA_NR_PCHANS ; } +if (pdev->dev.of_node &&of_property_read_u32 (pdev->dev.of_node, +"dma-channel-mask" , + &cqdma->dma_mask)) { +dev_info (&pdev->dev, +"Using 0 as missing dma-channel-mask property\n" ); + }else { + cqdma_dmamask =DMA_BIT_MASK (cqdma->dma_mask); + pdev->dev.dma_mask = &cqdma_dmamask; + } + cqdma->pc =devm_kcalloc (&pdev->dev, cqdma->dma_channels,sizeof (*cqdma->pc),GFP_KERNEL );if (!cqdma->pc)
Signature · 1 line
1.9.1
Matthias Brugger
maintainerRe: [PATCH v4 4/4] dmaengine: mediatek-cqdma: add dma mask for capability
Quoted 3 lines · EastL
This patch add dma mask for capability.
Change-Id: I31f4622f9541d769702029532e5f5f185815dda2
No Change-Id in the commit message please.
Quoted 34 lines
Signed-off-by EastL <[email protected]>--- drivers/dma/mediatek/mtk-cqdma.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)drivers/dma/mediatek/mtk-cqdma.c +3
-0@@ -117,6 +117,7 @@ struct mtk_cqdma_vchan {* @clk: The clock that device internal is using * @dma_requests: The number of VCs the device supports to * @dma_channels: The number of PCs the device supports to +* @dma_mask: A mask for DMA capability * @vc: The pointer to all available VCs * @pc: The pointer to all the underlying PCs */ @@ -126,6 +127,7 @@ struct mtk_cqdma_device {u32 dma_requests;u32 dma_channels; +u32 dma_mask;struct mtk_cqdma_vchan *vc;struct mtk_cqdma_pchan **pc; };@@ -549,6 +551,7 @@ static void mtk_cqdma_hw_deinit(struct mtk_cqdma_device *cqdma) };MODULE_DEVICE_TABLE (of, mtk_cqdma_match); +static u64 cqdma_dmamask;static int mtk_cqdma_probe (struct platform_device *pdev) {struct mtk_cqdma_device *cqdma;
drivers/dma/mediatek/mtk-cqdma.c static int mtk_cqdma_probe(struct platform_device *pdev) · line 615
Quoted 6 lines
drivers/dma/mediatek/mtk-cqdma.c +3
-0@@ -607,6 +610,16 @@ static int mtk_cqdma_probe(struct platform_device *pdev) cqdma->dma_channels =MTK_CQDMA_NR_PCHANS ; } +if (pdev->dev.of_node &&of_property_read_u32 (pdev->dev.of_node, +"dma-channel-mask" , + &cqdma->dma_mask)) {
I'd prefer:
if (pdev->dev.of_node)
ret = of_property_read_u32(pdev->dev.of_node,
"dma-channel-mask",
&cqdma->dma_mask))
if (ret) {
dev_warn(&pdev->dev,
"Using 0 as missing dma-channel-mask
property\n");
cqdma->dma_mask = 0;
}drivers/dma/mediatek/mtk-cqdma.c static int mtk_cqdma_probe(struct platform_device *pdev) · line 617
Quoted 2 lines
drivers/dma/mediatek/mtk-cqdma.c +2
-0+dev_info (&pdev->dev, +"Using 0 as missing dma-channel-mask property\n" );
dev_warn should be OK.
drivers/dma/mediatek/mtk-cqdma.c static int mtk_cqdma_probe(struct platform_device *pdev) · line 620
Quoted 3 lines
drivers/dma/mediatek/mtk-cqdma.c +3
-0+ }else { + cqdma_dmamask =DMA_BIT_MASK (cqdma->dma_mask); + pdev->dev.dma_mask = &cqdma_dmamask;
if (dma_set_mask(&pdev->dev,
DMA_BIT_MASK(cqdma->dma_mask)) {
/* error out */
}Quoted 6 lines
drivers/dma/mediatek/mtk-cqdma.c +2
-0+ } + cqdma->pc =devm_kcalloc (&pdev->dev, cqdma->dma_channels,sizeof (*cqdma->pc),GFP_KERNEL );if (!cqdma->pc)
Re: [PATCH v4 4/4] dmaengine: mediatek-cqdma: add dma mask for capability
Quoted 67 lines · Matthias Brugger
Quoted 3 lines · EastL
This patch add dma mask for capability.
Change-Id: I31f4622f9541d769702029532e5f5f185815dda2
No Change-Id in the commit message please.
Quoted 34 lines
Signed-off-by EastL <[email protected]>--- drivers/dma/mediatek/mtk-cqdma.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)drivers/dma/mediatek/mtk-cqdma.c +3
-0@@ -117,6 +117,7 @@ struct mtk_cqdma_vchan {* @clk: The clock that device internal is using * @dma_requests: The number of VCs the device supports to * @dma_channels: The number of PCs the device supports to +* @dma_mask: A mask for DMA capability * @vc: The pointer to all available VCs * @pc: The pointer to all the underlying PCs */ @@ -126,6 +127,7 @@ struct mtk_cqdma_device {u32 dma_requests;u32 dma_channels; +u32 dma_mask;struct mtk_cqdma_vchan *vc;struct mtk_cqdma_pchan **pc; };@@ -549,6 +551,7 @@ static void mtk_cqdma_hw_deinit(struct mtk_cqdma_device *cqdma) };MODULE_DEVICE_TABLE (of, mtk_cqdma_match); +static u64 cqdma_dmamask;static int mtk_cqdma_probe (struct platform_device *pdev) {struct mtk_cqdma_device *cqdma;drivers/dma/mediatek/mtk-cqdma.c static int mtk_cqdma_probe(struct platform_device *pdev) · line 615
Quoted 6 lines
drivers/dma/mediatek/mtk-cqdma.c +3
-0@@ -607,6 +610,16 @@ static int mtk_cqdma_probe(struct platform_device *pdev) cqdma->dma_channels =MTK_CQDMA_NR_PCHANS ; } +if (pdev->dev.of_node &&of_property_read_u32 (pdev->dev.of_node, +"dma-channel-mask" , + &cqdma->dma_mask)) {I'd prefer:
if (
pdev->dev.of_node)ret = of_property_read_u32(pdev->dev.of_node, "dma-channel-mask", &cqdma->dma_mask)) if (ret) { dev_warn(&pdev->dev, "Using 0 as missing dma-channel-mask property\n"); cqdma->dma_mask = 0; }drivers/dma/mediatek/mtk-cqdma.c static int mtk_cqdma_probe(struct platform_device *pdev) · line 617
Quoted 2 lines
drivers/dma/mediatek/mtk-cqdma.c +2
-0+dev_info (&pdev->dev, +"Using 0 as missing dma-channel-mask property\n" );
dev_warnshould be OK.
Quoted 9 lines
drivers/dma/mediatek/mtk-cqdma.c static int mtk_cqdma_probe(struct platform_device *pdev) · line 620
Quoted 3 lines
drivers/dma/mediatek/mtk-cqdma.c +3
-0+ }else { + cqdma_dmamask =DMA_BIT_MASK (cqdma->dma_mask); + pdev->dev.dma_mask = &cqdma_dmamask;if (dma_set_mask(&pdev->dev,
DMA_BIT_MASK(cqdma->dma_mask)) { /* error out */ }
OK, I'll fix it on next version.
Quoted 6 lines
Quoted 6 lines
drivers/dma/mediatek/mtk-cqdma.c +2
-0+ } + cqdma->pc =devm_kcalloc (&pdev->dev, cqdma->dma_channels,sizeof (*cqdma->pc),GFP_KERNEL );if (!cqdma->pc)