mmc: sdhci-msm: Clear tuning done flag while hs400 tuning
Subsystems (4)
PATCH 1/1 mmc: sdhci-msm: Clear tuning done flag while hs400 tuning
Clear tuning_done flag while executing tuning to ensure vendor specific HS400 settings are applied properly when the controller is re-initialized in HS400 mode.
Without this, re-initialization of the qcom SDHC in HS400 mode fails while resuming the driver from runtime-suspend or system-suspend.
--- drivers/mmc/host/sdhci-msm.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/mmc/host/sdhci-msm.c +6 -0
@@ -1174,6 +1174,12 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode) msm_host->use_cdr = true;/* +* Clear tuning_done flag before tuning to ensure proper +* HS400 settings. +*/ + msm_host->tuning_done =0 ; + +/* * For HS400 tuning in HS200 timing requires: * - select MCLK/2 in VENDOR_SPEC * - program MCLK to 400MHz (or nearest supported) in GCC
Signature · 1 line
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
Quoted 11 lines · Veerabhadrarao Badiganti
Clear
tuning_doneflag while executing tuning to ensure vendor specific HS400 settings are applied properly when the controller is re-initialized in HS400 mode.Without this, re-initialization of the qcom SDHC in HS400 mode fails while resuming the driver from runtime-suspend or system-suspend.
Fixes ff06ce4 ("mmc: sdhci-msm: Add HS400 platform support")Signed-off-by Veerabhadrarao Badiganti <[email protected]>
Applied for next, thanks!
Kind regards
Uffe
Quoted 24 lines
--- drivers/mmc/host/sdhci-msm.c | 6 ++++++ 1 file changed, 6 insertions(+)drivers/mmc/host/sdhci-msm.c +6
-1@@ -1174,6 +1174,12 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode) msm_host->use_cdr = true;/* +* Clear tuning_done flag before tuning to ensure proper +* HS400 settings. +*/ + msm_host->tuning_done =0 ; + +/* * For HS400 tuning in HS200 timing requires: * - select MCLK/2 in VENDOR_SPEC * - program MCLK to 400MHz (or nearest supported) in GCC -- Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
Quoted 9 lines · Ulf Hansson
Quoted 7 lines · Veerabhadrarao Badiganti
Clear
tuning_doneflag while executing tuning to ensure vendor specific HS400 settings are applied properly when the controller is re-initialized in HS400 mode.Without this, re-initialization of the qcom SDHC in HS400 mode fails while resuming the driver from runtime-suspend or system-suspend.
Quoted 7 lines
Quoted 3 lines
Fixes ff06ce4 ("mmc: sdhci-msm: Add HS400 platform support")Signed-off-by Veerabhadrarao Badiganti <[email protected]>Applied for next, thanks!
Kind regards
Uffe
Thanks Ulf.
I see a mail on this patch, that SHA in the commit text should be 12 digit. Let me know if i have to re-post this patch by correcting it.
Quoted 24 lines
Quoted 24 lines
--- drivers/mmc/host/sdhci-msm.c | 6 ++++++ 1 file changed, 6 insertions(+)drivers/mmc/host/sdhci-msm.c +6
-1@@ -1174,6 +1174,12 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode) msm_host->use_cdr = true;/* +* Clear tuning_done flag before tuning to ensure proper +* HS400 settings. +*/ + msm_host->tuning_done =0 ; + +/* * For HS400 tuning in HS200 timing requires: * - select MCLK/2 in VENDOR_SPEC * - program MCLK to 400MHz (or nearest supported) in GCC -- Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project