dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema
PATCH 1/1 dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema
Convert the i.MX8QXP LPCG binding to DT schema format using json-schema.
Signed-off-by Anson Huang <[email protected]>
--- .../devicetree/bindings/clock/imx8qxp-lpcg.txt | 51 --------------- .../devicetree/bindings/clock/imx8qxp-lpcg.yaml | 72 ++++++++++++++++++++++ 2 files changed, 72 insertions(+), 51 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt create mode 100644 Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt deleted +0 -51
@@ -1,51 +0,0 @@ -* NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings - -The Low-Power Clock Gate (LPCG) modules contain a local programming -model to control the clock gates for the peripherals. An LPCG module -is used to locally gate the clocks for the associated peripheral. - -Note: -This level of clock gating is provided after the clocks are generated -by the SCU resources and clock controls. Thus even if the clock is -enabled by these control bits, it might still not be running based -on the base resource. - -Required properties: -- compatible: Should be one of: - "fsl,imx8qxp-lpcg-adma", - "fsl,imx8qxp-lpcg-conn", - "fsl,imx8qxp-lpcg-dc", - "fsl,imx8qxp-lpcg-dsp", - "fsl,imx8qxp-lpcg-gpu", - "fsl,imx8qxp-lpcg-hsio", - "fsl,imx8qxp-lpcg-img", - "fsl,imx8qxp-lpcg-lsio", - "fsl,imx8qxp-lpcg-vpu" -- reg: Address and length of the register set -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. -See the full list of clock IDs from: -include/dt-bindings/clock/imx8qxp-clock.h - -Examples: - -#include <dt-bindings/clock/imx8qxp-clock.h> - -conn_lpcg: clock-controller@5b200000 { - compatible = "fsl,imx8qxp-lpcg-conn"; - reg = <0x5b200000 0xb0000>; - #clock-cells = <1>; -}; - -usdhc1: mmc@5b010000 { - compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x5b010000 0x10000>; - clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_IPG_CLK>, - <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_PER_CLK>, - <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_HCLK>; - clock-names = "ipg", "per", "ahb"; -};
Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml new file +72 -0
72 lines not on this page · raw message
Signature · 1 line
2.7.4
Quoted 10 lines · Anson Huang
Convert the i.MX8QXP LPCG binding to DT schema format using json-schema.
Signed-off-by Anson Huang <[email protected]>--- .../devicetree/bindings/clock/imx8qxp-lpcg.txt | 51 --------------- .../devicetree/bindings/clock/imx8qxp-lpcg.yaml | 72 ++++++++++++++++++++++ 2 files changed, 72 insertions(+), 51 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt create mode 100644 Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
Applied, thanks!