Skip to contentSkip to conversation

riscv: Add KGDB and KDB support

PATCH New Vincent Chen 1 participant 7 messages Jun 1, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v5 cover riscv: Add KGDB and KDB support

This patch set implements required ports to enable RISC-V kernel to support KGDB and KDB features. Because there is no immediate value in the RISC-V trap instruction, the kernel cannot identify the purpose of each trap exception through the opcode. This makes the existing identification schemes in other architecture unsuitable for the RISC-V kernel. In order to solve this problem, this patch adds the kgdb_has_hit_break() to kgdb.c to help the RISC-V kernel identify the KGDB trap exception. In addition, the XML target description was introduced in this patch set to enable KGDB to report the contents of the $status, $cause and $badaddr registers.

This patchset has passed the kgdbts test suite provided by Linux kernel on HiFive unleashed board and QEMU.

Changes since v4:
1. Fix some compile warnings reported by linux kbuild test
2. Select ARCH_OPTIONAL_KERNEL_RWX to enable the kconfig prompt of CONFIG_STRICT_KERNEL_RWX

Changes since v3:
1. remove duplicate macro defition
2. Rename CONFIG_ARCH_SUPPORTS_GDB_XML to CONFIG_HAVE_ARCH_KGDB_QXFER_PKT in the description of patch 03/05.

Changes since v2:
1. Fix typos
2. Rename CONFIG_ARCH_SUPPORTS_GDB_XML to CONFIG_HAVE_ARCH_KGDB_QXFER_PKT
3. Add the prefix kgdb_ to the handler functions and arrays that handle "qxfer" packets

Changes since v1:
1. Replace the magic number with macro when filling the gdb_regs[].
2. Only support GDB XML packet instead of all query packets.
3. Move the macros used to parse instructions to parse_asm.h

Vincent Chen (6):
kgdb: Add kgdb_has_hit_break function
riscv: Add KGDB support
kgdb: enable arch to support XML packet support.
riscv: enable the Kconfig prompt of STRICT_KERNEL_RWX
riscv: Use the XML target descriptions to report 3 system registers
riscv: Add SW single-step support for KDB

 arch/riscv/Kconfig                 |   3 +
 arch/riscv/include/asm/gdb_xml.h   | 116 +++++++++++
 arch/riscv/include/asm/kdebug.h    |  12 ++
 arch/riscv/include/asm/kgdb.h      | 113 +++++++++++
 arch/riscv/include/asm/parse_asm.h | 219 +++++++++++++++++++++
 arch/riscv/kernel/Makefile         |   1 +
 arch/riscv/kernel/kgdb.c           | 392 +++++++++++++++++++++++++++++++++++++
 arch/riscv/kernel/traps.c          |   5 +
 include/linux/kgdb.h               |  12 ++
 kernel/debug/debug_core.c          |  12 ++
 kernel/debug/gdbstub.c             |  13 ++
 lib/Kconfig.kgdb                   |   5 +
 12 files changed, 903 insertions(+)
 create mode 100644 arch/riscv/include/asm/gdb_xml.h
 create mode 100644 arch/riscv/include/asm/kdebug.h
 create mode 100644 arch/riscv/include/asm/kgdb.h
 create mode 100644 arch/riscv/include/asm/parse_asm.h
 create mode 100644 arch/riscv/kernel/kgdb.c
Signature · 1 line
2.7.4
#1 lore raw

PATCH v5 1/6 kgdb: Add kgdb_has_hit_break function

The break instruction in RISC-V does not have an immediate value field, so the kernel cannot identify the purpose of each trap exception through the opcode. This makes the existing identification schemes in other architecture unsuitable for the RISC-V kernel. To solve this problem, this patch adds kgdb_has_hit_break(), which can help RISC-V kernel identify the KGDB trap exception.

---
 include/linux/kgdb.h      |  1 +
 kernel/debug/debug_core.c | 12 ++++++++++++
 2 files changed, 13 insertions(+)
include/linux/kgdb.h +1 -0
index b072aeb1fd78..03c64aa8ba36 100644
@@ -311,6 +311,7 @@ extern int kgdb_hex2mem(char *buf, char *mem, int count);
 
 extern int kgdb_isremovedbreak(unsigned long addr);
 extern void kgdb_schedule_breakpoint(void);
+extern int kgdb_has_hit_break(unsigned long addr);
 
 extern int
 kgdb_handle_exception(int ex_vector, int signo, int err_code,
kernel/debug/debug_core.c +12 -0
index 2b7c9b67931d..01bc3eea3d4d 100644
@@ -417,6 +417,18 @@ int kgdb_isremovedbreak(unsigned long addr)
 	return 0;
 }
 
+int kgdb_has_hit_break(unsigned long addr)
+{
+	int i;
+
+	for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
+		if (kgdb_break[i].state == BP_ACTIVE &&
+		    kgdb_break[i].bpt_addr == addr)
+			return 1;
+	}
+	return 0;
+}
+
 int dbg_remove_all_break(void)
 {
 	int error;
Signature · 1 line
2.7.4
#2 lore raw

PATCH v5 2/6 riscv: Add KGDB support

In reply to Vincent Chen

The skeleton of RISC-V KGDB port.

---
 arch/riscv/Kconfig              |   1 +
 arch/riscv/include/asm/kdebug.h |  12 +++
 arch/riscv/include/asm/kgdb.h   | 105 +++++++++++++++++++++
 arch/riscv/kernel/Makefile      |   1 +
 arch/riscv/kernel/kgdb.c        | 200 ++++++++++++++++++++++++++++++++++++++++
 arch/riscv/kernel/traps.c       |   5 +
 6 files changed, 324 insertions(+)
 create mode 100644 arch/riscv/include/asm/kdebug.h
 create mode 100644 arch/riscv/include/asm/kgdb.h
 create mode 100644 arch/riscv/kernel/kgdb.c
arch/riscv/Kconfig +1 -0
index a31e1a41913a..85c5c1829cc4 100644
@@ -68,6 +68,7 @@ config RISCV
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select HAVE_COPY_THREAD_TLS
 	select HAVE_ARCH_KASAN if MMU && 64BIT
+	select HAVE_ARCH_KGDB
 
 config ARCH_MMAP_RND_BITS_MIN
 	default 18 if 64BIT
arch/riscv/include/asm/kdebug.h new file +12 -0
new file mode 100644
index 000000000000..85ac00411f6e
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ASM_ARC_KDEBUG_H
+#define _ASM_ARC_KDEBUG_H
+
+enum die_val {
+	DIE_UNUSED,
+	DIE_TRAP,
+	DIE_OOPS
+};
+
+#endif
arch/riscv/include/asm/kgdb.h new file +105 -0

105 lines not on this page · raw message

arch/riscv/kernel/Makefile +1 -0
index d8bbd3207100..b355cf485671 100644
@@ -51,5 +51,6 @@ ifeq ($(CONFIG_RISCV_SBI), y)
 obj-$(CONFIG_SMP) += cpu_ops_sbi.o
 endif
 obj-$(CONFIG_HOTPLUG_CPU)	+= cpu-hotplug.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 
 clean:
arch/riscv/kernel/kgdb.c new file +200 -0

200 lines not on this page · raw message

arch/riscv/kernel/traps.c +5 -0
index 7f58fa53033f..5080fdf8c296 100644
@@ -147,6 +147,11 @@ asmlinkage __visible void do_trap_break(struct pt_regs *regs)
 {
 	if (user_mode(regs))
 		force_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *)regs->epc);
+#ifdef CONFIG_KGDB
+	else if (notify_die(DIE_TRAP, "EBREAK", regs, 0, regs->cause, SIGTRAP)
+								== NOTIFY_STOP)
+		return;
+#endif
 	else if (report_bug(regs->epc, regs) == BUG_TRAP_TYPE_WARN)
 		regs->epc += get_break_insn_length(regs->epc);
 	else
Signature · 1 line
2.7.4
#3 lore raw

PATCH v5 3/6 kgdb: enable arch to support XML packet support.

In reply to Vincent Chen

The XML packet could be supported by required architecture if the architecture defines CONFIG_HAVE_ARCH_KGDB_QXFER_PKT and implement its own kgdb_arch_handle_qxfer_pkt(). Except for the kgdb_arch_handle_qxfer_pkt(), the architecture also needs to record the feature supported by gdb stub into the kgdb_arch_gdb_stub_feature, and these features will be reported to host gdb when gdb stub receives the qSupported packet.

---
 include/linux/kgdb.h   | 11 +++++++++++
 kernel/debug/gdbstub.c | 13 +++++++++++++
 lib/Kconfig.kgdb       |  5 +++++
 3 files changed, 29 insertions(+)
include/linux/kgdb.h +11 -0
index 03c64aa8ba36..0e7a12c59f26 100644
@@ -177,6 +177,17 @@ kgdb_arch_handle_exception(int vector, int signo, int err_code,
 			   struct pt_regs *regs);
 
 /**
+ *	kgdb_arch_handle_qxfer_pkt - Handle architecture specific GDB XML
+ *				     packets.
+ *	@remcom_in_buffer: The buffer of the packet we have read.
+ *	@remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into.
+ */
+
+extern void
+kgdb_arch_handle_qxfer_pkt(char *remcom_in_buffer,
+			   char *remcom_out_buffer);
+
+/**
  *	kgdb_call_nmi_hook - Call kgdb_nmicallback() on the current CPU
  *	@ignored: This parameter is only here to match the prototype.
  *
kernel/debug/gdbstub.c +13 -0
index 4b280fc7dd67..a0617c883029 100644
@@ -792,6 +792,19 @@ static void gdb_cmd_query(struct kgdb_state *ks)
 		}
 		break;
 #endif
+#ifdef CONFIG_HAVE_ARCH_KGDB_QXFER_PKT
+	case 'S':
+		if (!strncmp(remcom_in_buffer, "qSupported:", 11))
+			strcpy(remcom_out_buffer, kgdb_arch_gdb_stub_feature);
+		break;
+	case 'X':
+		if (!strncmp(remcom_in_buffer, "qXfer:", 6))
+			kgdb_arch_handle_qxfer_pkt(remcom_in_buffer,
+						   remcom_out_buffer);
+		break;
+#endif
+	default:
+		break;
 	}
 }
 
lib/Kconfig.kgdb +5 -0
index 933680b59e2d..d7f70335efaf 100644
@@ -3,6 +3,11 @@
 config HAVE_ARCH_KGDB
 	bool
 
+# set if architecture has the its kgdb_arch_handle_qxfer_pkt
+# function to enable gdb stub to address XML packet sent from GDB.
+config HAVE_ARCH_KGDB_QXFER_PKT
+	bool
+
 menuconfig KGDB
 	bool "KGDB: kernel debugger"
 	depends on HAVE_ARCH_KGDB
Signature · 1 line
2.7.4
#4 lore raw

PATCH v5 4/6 riscv: enable the Kconfig prompt of STRICT_KERNEL_RWX

In reply to Vincent Chen

Due to lack of hardware breakpoint support, the kernel option CONFIG_STRICT_KERNEL_RWX should be disabled when using KGDB. However, CONFIG_STRICT_KERNEL_RWX is always enabled now. Therefore, select ARCH_OPTIONAL_KERNEL_RWX to enable the Kconfig prompt of CONFIG_STRICT_KERNEL_RWX so that user can turn it off.

---
 arch/riscv/Kconfig | 1 +
 1 file changed, 1 insertion(+)
arch/riscv/Kconfig +1 -0
index 85c5c1829cc4..c12d471280f7 100644
@@ -61,6 +61,7 @@ config RISCV
 	select ARCH_HAS_SET_DIRECT_MAP
 	select ARCH_HAS_SET_MEMORY
 	select ARCH_HAS_STRICT_KERNEL_RWX if MMU
+	select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
 	select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
 	select SPARSEMEM_STATIC if 32BIT
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
Signature · 1 line
2.7.4
#5 lore raw

PATCH v5 5/6 riscv: Use the XML target descriptions to report 3 system registers

In reply to Vincent Chen

The $status, $badaddr, and $cause registers belong to the thread context, so KGDB can obtain their contents from pt_regs in each trap. However, the sequential number of these registers in the gdb register list is far from the general-purpose registers. If riscv port uses the existing method to report these three registers, many trivial registers with sequence numbers in the middle of them will also be packaged to the reply packets. To solve this problem, the riscv port wants to introduce the GDB target description mechanism to customize the reported register list. By the list, the KGDB can ignore the intermediate registers and just reports the general-purpose registers and these three system registers.

---
 arch/riscv/Kconfig               |   1 +
 arch/riscv/include/asm/gdb_xml.h | 116 +++++++++++++++++++++++++++++++++++++++
 arch/riscv/include/asm/kgdb.h    |  10 +++-
 arch/riscv/kernel/kgdb.c         |  15 +++++
 4 files changed, 141 insertions(+), 1 deletion(-)
 create mode 100644 arch/riscv/include/asm/gdb_xml.h
arch/riscv/Kconfig +1 -0
index c12d471280f7..4f95c0ea24b1 100644
@@ -70,6 +70,7 @@ config RISCV
 	select HAVE_COPY_THREAD_TLS
 	select HAVE_ARCH_KASAN if MMU && 64BIT
 	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_KGDB_QXFER_PKT
 
 config ARCH_MMAP_RND_BITS_MIN
 	default 18 if 64BIT
arch/riscv/include/asm/gdb_xml.h new file +116 -0

116 lines not on this page · raw message

arch/riscv/include/asm/kgdb.h +9 -1
index a348efbf04d1..46677daf708b 100644
@@ -7,7 +7,7 @@
 
 #define GDB_SIZEOF_REG sizeof(unsigned long)
 
-#define DBG_MAX_REG_NUM (33)
+#define DBG_MAX_REG_NUM (36)
 #define NUMREGBYTES ((DBG_MAX_REG_NUM) * GDB_SIZEOF_REG)
 #define CACHE_FLUSH_IS_SAFE     1
 #define BUFMAX                  2048
@@ -64,6 +64,9 @@ static inline void arch_kgdb_breakpoint(void)
 #define DBG_REG_T5 "t5"
 #define DBG_REG_T6 "t6"
 #define DBG_REG_EPC "pc"
+#define DBG_REG_STATUS "sstatus"
+#define DBG_REG_BADADDR "stval"
+#define DBG_REG_CAUSE "scause"
 
 #define DBG_REG_ZERO_OFF 0
 #define DBG_REG_RA_OFF 1
@@ -101,5 +104,10 @@ static inline void arch_kgdb_breakpoint(void)
 #define DBG_REG_STATUS_OFF 33
 #define DBG_REG_BADADDR_OFF 34
 #define DBG_REG_CAUSE_OFF 35
+
+extern const char riscv_gdb_stub_feature[64];
+
+#define kgdb_arch_gdb_stub_feature riscv_gdb_stub_feature
+
 #endif
 #endif
arch/riscv/kernel/kgdb.c +15 -0
index e6b1f989f704..3b7276cadbe3 100644
@@ -10,6 +10,7 @@
 #include <linux/irqflags.h>
 #include <linux/string.h>
 #include <asm/cacheflush.h>
+#include <asm/gdb_xml.h>
 
 enum {
 	NOT_KGDB_BREAK = 0,
@@ -51,6 +52,9 @@ struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = {
 	{DBG_REG_T5, GDB_SIZEOF_REG, offsetof(struct pt_regs, t5)},
 	{DBG_REG_T6, GDB_SIZEOF_REG, offsetof(struct pt_regs, t6)},
 	{DBG_REG_EPC, GDB_SIZEOF_REG, offsetof(struct pt_regs, epc)},
+	{DBG_REG_STATUS, GDB_SIZEOF_REG, offsetof(struct pt_regs, status)},
+	{DBG_REG_BADADDR, GDB_SIZEOF_REG, offsetof(struct pt_regs, badaddr)},
+	{DBG_REG_CAUSE, GDB_SIZEOF_REG, offsetof(struct pt_regs, cause)},
 };
 
 char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
@@ -103,6 +107,17 @@ void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
 	regs->epc = pc;
 }
 
+void kgdb_arch_handle_qxfer_pkt(char *remcom_in_buffer,
+				char *remcom_out_buffer)
+{
+	if (!strncmp(remcom_in_buffer, gdb_xfer_read_target,
+		     sizeof(gdb_xfer_read_target)))
+		strcpy(remcom_out_buffer, riscv_gdb_stub_target_desc);
+	else if (!strncmp(remcom_in_buffer, gdb_xfer_read_cpuxml,
+			  sizeof(gdb_xfer_read_cpuxml)))
+		strcpy(remcom_out_buffer, riscv_gdb_stub_cpuxml);
+}
+
 static inline void kgdb_arch_update_addr(struct pt_regs *regs,
 					 char *remcom_in_buffer)
 {
Signature · 1 line
2.7.4
#6 lore raw

PATCH v5 6/6 riscv: Add SW single-step support for KDB

In reply to Vincent Chen

In KGDB, the GDB in the host is responsible for the single-step operation of the software. In other words, KGDB does not need to derive the next pc address when performing a software single-step operation. KGDB just inserts the break instruction at the indicated address according to the GDB instructions. This approach does not work in KDB because the GDB does not involve the KDB process. Therefore, this patch provides KDB a software single-step mechanism to use.

---
 arch/riscv/include/asm/parse_asm.h | 219 +++++++++++++++++++++++++++++++++++++
 arch/riscv/kernel/kgdb.c           | 179 +++++++++++++++++++++++++++++-
 2 files changed, 397 insertions(+), 1 deletion(-)
 create mode 100644 arch/riscv/include/asm/parse_asm.h
arch/riscv/include/asm/parse_asm.h new file +219 -0
new file mode 100644
index 000000000000..f36368de839f
@@ -0,0 +1,219 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 SiFive
+ */
+
+#include <linux/bits.h>
+
+/* The bit field of immediate value in I-type instruction */
+#define I_IMM_SIGN_OPOFF	31
+#define I_IMM_11_0_OPOFF	20
+#define I_IMM_SIGN_OFF		12
+#define I_IMM_11_0_OFF		0
+#define I_IMM_11_0_MASK		GENMASK(11, 0)
+
+/* The bit field of immediate value in J-type instruction */
+#define J_IMM_SIGN_OPOFF	31
+#define J_IMM_10_1_OPOFF	21
+#define J_IMM_11_OPOFF		20
+#define J_IMM_19_12_OPOFF	12
+#define J_IMM_SIGN_OFF		20
+#define J_IMM_10_1_OFF		1
+#define J_IMM_11_OFF		11
+#define J_IMM_19_12_OFF		12
+#define J_IMM_10_1_MASK		GENMASK(9, 0)
+#define J_IMM_11_MASK		GENMASK(0, 0)
+#define J_IMM_19_12_MASK	GENMASK(7, 0)
+
+/* The bit field of immediate value in B-type instruction */
+#define B_IMM_SIGN_OPOFF	31
+#define B_IMM_10_5_OPOFF	25
+#define B_IMM_4_1_OPOFF		8
+#define B_IMM_11_OPOFF		7
+#define B_IMM_SIGN_OFF		12
+#define B_IMM_10_5_OFF		5
+#define B_IMM_4_1_OFF		1
+#define B_IMM_11_OFF		11
+#define B_IMM_10_5_MASK		GENMASK(5, 0)
+#define B_IMM_4_1_MASK		GENMASK(3, 0)
+#define B_IMM_11_MASK		GENMASK(0, 0)
+
+/* The register offset in RVG instruction */
+#define RVG_RS1_OPOFF		15
+#define RVG_RS2_OPOFF		20
+#define RVG_RD_OPOFF		7
+
+/* The bit field of immediate value in RVC J instruction */
+#define RVC_J_IMM_SIGN_OPOFF	12
+#define RVC_J_IMM_4_OPOFF	11
+#define RVC_J_IMM_9_8_OPOFF	9
+#define RVC_J_IMM_10_OPOFF	8
+#define RVC_J_IMM_6_OPOFF	7
+#define RVC_J_IMM_7_OPOFF	6
+#define RVC_J_IMM_3_1_OPOFF	3
+#define RVC_J_IMM_5_OPOFF	2
+#define RVC_J_IMM_SIGN_OFF	11
+#define RVC_J_IMM_4_OFF		4
+#define RVC_J_IMM_9_8_OFF	8
+#define RVC_J_IMM_10_OFF	10
+#define RVC_J_IMM_6_OFF		6
+#define RVC_J_IMM_7_OFF		7
+#define RVC_J_IMM_3_1_OFF	1
+#define RVC_J_IMM_5_OFF		5
+#define RVC_J_IMM_4_MASK	GENMASK(0, 0)
+#define RVC_J_IMM_9_8_MASK	GENMASK(1, 0)
+#define RVC_J_IMM_10_MASK	GENMASK(0, 0)
+#define RVC_J_IMM_6_MASK	GENMASK(0, 0)
+#define RVC_J_IMM_7_MASK	GENMASK(0, 0)
+#define RVC_J_IMM_3_1_MASK	GENMASK(2, 0)
+#define RVC_J_IMM_5_MASK	GENMASK(0, 0)
+
+/* The bit field of immediate value in RVC B instruction */
+#define RVC_B_IMM_SIGN_OPOFF	12
+#define RVC_B_IMM_4_3_OPOFF	10
+#define RVC_B_IMM_7_6_OPOFF	5
+#define RVC_B_IMM_2_1_OPOFF	3
+#define RVC_B_IMM_5_OPOFF	2
+#define RVC_B_IMM_SIGN_OFF	8
+#define RVC_B_IMM_4_3_OFF	3
+#define RVC_B_IMM_7_6_OFF	6
+#define RVC_B_IMM_2_1_OFF	1
+#define RVC_B_IMM_5_OFF		5
+#define RVC_B_IMM_4_3_MASK	GENMASK(1, 0)
+#define RVC_B_IMM_7_6_MASK	GENMASK(1, 0)
+#define RVC_B_IMM_2_1_MASK	GENMASK(1, 0)
+#define RVC_B_IMM_5_MASK	GENMASK(0, 0)
+
+/* The register offset in RVC op=C0 instruction */
+#define RVC_C0_RS1_OPOFF	7
+#define RVC_C0_RS2_OPOFF	2
+#define RVC_C0_RD_OPOFF		2
+
+/* The register offset in RVC op=C1 instruction */
+#define RVC_C1_RS1_OPOFF	7
+#define RVC_C1_RS2_OPOFF	2
+#define RVC_C1_RD_OPOFF		7
+
+/* The register offset in RVC op=C2 instruction */
+#define RVC_C2_RS1_OPOFF	7
+#define RVC_C2_RS2_OPOFF	2
+#define RVC_C2_RD_OPOFF		7
+
+/* parts of opcode for RVG*/
+#define OPCODE_BRANCH		0x63
+#define OPCODE_JALR		0x67
+#define OPCODE_JAL		0x6f
+#define OPCODE_SYSTEM		0x73
+
+/* parts of opcode for RVC*/
+#define OPCODE_C_0		0x0
+#define OPCODE_C_1		0x1
+#define OPCODE_C_2		0x2
+
+/* parts of funct3 code for I, M, A extension*/
+#define FUNCT3_JALR		0x0
+#define FUNCT3_BEQ		0x0
+#define FUNCT3_BNE		0x1000
+#define FUNCT3_BLT		0x4000
+#define FUNCT3_BGE		0x5000
+#define FUNCT3_BLTU		0x6000
+#define FUNCT3_BGEU		0x7000
+
+/* parts of funct3 code for C extension*/
+#define FUNCT3_C_BEQZ		0xc000
+#define FUNCT3_C_BNEZ		0xe000
+#define FUNCT3_C_J		0xa000
+#define FUNCT3_C_JAL		0x2000
+#define FUNCT4_C_JR		0x8000
+#define FUNCT4_C_JALR		0xf000
+
+#define FUNCT12_SRET		0x10200000
+
+#define MATCH_JALR		(FUNCT3_JALR | OPCODE_JALR)
+#define MATCH_JAL		(OPCODE_JAL)
+#define MATCH_BEQ		(FUNCT3_BEQ | OPCODE_BRANCH)
+#define MATCH_BNE		(FUNCT3_BNE | OPCODE_BRANCH)
+#define MATCH_BLT		(FUNCT3_BLT | OPCODE_BRANCH)
+#define MATCH_BGE		(FUNCT3_BGE | OPCODE_BRANCH)
+#define MATCH_BLTU		(FUNCT3_BLTU | OPCODE_BRANCH)
+#define MATCH_BGEU		(FUNCT3_BGEU | OPCODE_BRANCH)
+#define MATCH_SRET		(FUNCT12_SRET | OPCODE_SYSTEM)
+#define MATCH_C_BEQZ		(FUNCT3_C_BEQZ | OPCODE_C_1)
+#define MATCH_C_BNEZ		(FUNCT3_C_BNEZ | OPCODE_C_1)
+#define MATCH_C_J		(FUNCT3_C_J | OPCODE_C_1)
+#define MATCH_C_JAL		(FUNCT3_C_JAL | OPCODE_C_1)
+#define MATCH_C_JR		(FUNCT4_C_JR | OPCODE_C_2)
+#define MATCH_C_JALR		(FUNCT4_C_JALR | OPCODE_C_2)
+
+#define MASK_JALR		0x707f
+#define MASK_JAL		0x7f
+#define MASK_C_JALR		0xf07f
+#define MASK_C_JR		0xf07f
+#define MASK_C_JAL		0xe003
+#define MASK_C_J		0xe003
+#define MASK_BEQ		0x707f
+#define MASK_BNE		0x707f
+#define MASK_BLT		0x707f
+#define MASK_BGE		0x707f
+#define MASK_BLTU		0x707f
+#define MASK_BGEU		0x707f
+#define MASK_C_BEQZ		0xe003
+#define MASK_C_BNEZ		0xe003
+#define MASK_SRET		0xffffffff
+
+#define __INSN_LENGTH_MASK	_UL(0x3)
+#define __INSN_LENGTH_GE_32	_UL(0x3)
+#define __INSN_OPCODE_MASK	_UL(0x7F)
+#define __INSN_BRANCH_OPCODE	_UL(OPCODE_BRANCH)
+
+/* Define a series of is_XXX_insn functions to check if the value INSN
+ * is an instance of instruction XXX.
+ */
+#define DECLARE_INSN(INSN_NAME, INSN_MATCH, INSN_MASK) \
+static inline bool is_ ## INSN_NAME ## _insn(long insn) \
+{ \
+	return (insn & (INSN_MASK)) == (INSN_MATCH); \
+}
+
+#define RV_IMM_SIGN(x) (-(((x) >> 31) & 1))
+#define RVC_IMM_SIGN(x) (-(((x) >> 12) & 1))
+#define RV_X(X, s, mask)  (((X) >> (s)) & (mask))
+#define RVC_X(X, s, mask) RV_X(X, s, mask)
+
+#define EXTRACT_JTYPE_IMM(x) \
+	({typeof(x) x_ = (x); \
+	(RV_X(x_, J_IMM_10_1_OPOFF, J_IMM_10_1_MASK) << J_IMM_10_1_OFF) | \
+	(RV_X(x_, J_IMM_11_OPOFF, J_IMM_11_MASK) << J_IMM_11_OFF) | \
+	(RV_X(x_, J_IMM_19_12_OPOFF, J_IMM_19_12_MASK) << J_IMM_19_12_OFF) | \
+	(RV_IMM_SIGN(x_) << J_IMM_SIGN_OFF); })
+
+#define EXTRACT_ITYPE_IMM(x) \
+	({typeof(x) x_ = (x); \
+	(RV_X(x_, I_IMM_11_0_OPOFF, I_IMM_11_0_MASK)) | \
+	(RV_IMM_SIGN(x_) << I_IMM_SIGN_OFF); })
+
+#define EXTRACT_BTYPE_IMM(x) \
+	({typeof(x) x_ = (x); \
+	(RV_X(x_, B_IMM_4_1_OPOFF, B_IMM_4_1_MASK) << B_IMM_4_1_OFF) | \
+	(RV_X(x_, B_IMM_10_5_OPOFF, B_IMM_10_5_MASK) << B_IMM_10_5_OFF) | \
+	(RV_X(x_, B_IMM_11_OPOFF, B_IMM_11_MASK) << B_IMM_11_OFF) | \
+	(RV_IMM_SIGN(x_) << B_IMM_SIGN_OFF); })
+
+#define EXTRACT_RVC_J_IMM(x) \
+	({typeof(x) x_ = (x); \
+	(RVC_X(x_, RVC_J_IMM_3_1_OPOFF, RVC_J_IMM_3_1_MASK) << RVC_J_IMM_3_1_OFF) | \
+	(RVC_X(x_, RVC_J_IMM_4_OPOFF, RVC_J_IMM_4_MASK) << RVC_J_IMM_4_OFF) | \
+	(RVC_X(x_, RVC_J_IMM_5_OPOFF, RVC_J_IMM_5_MASK) << RVC_J_IMM_5_OFF) | \
+	(RVC_X(x_, RVC_J_IMM_6_OPOFF, RVC_J_IMM_6_MASK) << RVC_J_IMM_6_OFF) | \
+	(RVC_X(x_, RVC_J_IMM_7_OPOFF, RVC_J_IMM_7_MASK) << RVC_J_IMM_7_OFF) | \
+	(RVC_X(x_, RVC_J_IMM_9_8_OPOFF, RVC_J_IMM_9_8_MASK) << RVC_J_IMM_9_8_OFF) | \
+	(RVC_X(x_, RVC_J_IMM_10_OPOFF, RVC_J_IMM_10_MASK) << RVC_J_IMM_10_OFF) | \
+	(RVC_IMM_SIGN(x_) << RVC_J_IMM_SIGN_OFF); })
+
+#define EXTRACT_RVC_B_IMM(x) \
+	({typeof(x) x_ = (x); \
+	(RVC_X(x_, RVC_B_IMM_2_1_OPOFF, RVC_B_IMM_2_1_MASK) << RVC_B_IMM_2_1_OFF) | \
+	(RVC_X(x_, RVC_B_IMM_4_3_OPOFF, RVC_B_IMM_4_3_MASK) << RVC_B_IMM_4_3_OFF) | \
+	(RVC_X(x_, RVC_B_IMM_5_OPOFF, RVC_B_IMM_5_MASK) << RVC_B_IMM_5_OFF) | \
+	(RVC_X(x_, RVC_B_IMM_7_6_OPOFF, RVC_B_IMM_7_6_MASK) << RVC_B_IMM_7_6_OFF) | \
+	(RVC_IMM_SIGN(x_) << RVC_B_IMM_SIGN_OFF); })
arch/riscv/kernel/kgdb.c +178 -1

216 lines not on this page · raw message

Signature · 1 line
2.7.4