mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support
Subsystems (2)
PATCH v2 1/2 mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support
From: Jason Li <[email protected]>
Supports all CAxxxx SoCs which support a parallel nand controller. It should be noted that some CAxxxx Soc also support an separate SPI serial NAND controller.
This driver only supports the parallel NAND controller. A different driver supports the SPI NAND interface controller.
---
Changes in v2:
- Cleanup code style to pass checkpatch.pl
MAINTAINERS | 2 + drivers/mtd/nand/raw/Kconfig | 31 + drivers/mtd/nand/raw/Makefile | 1 + drivers/mtd/nand/raw/ca_nand.c | 4942 ++++++++++++++++++++++++++++++++++++++++ drivers/mtd/nand/raw/ca_nand.h | 3899 +++++++++++++++++++++++++++++++ 5 files changed, 8875 insertions(+) create mode 100644 drivers/mtd/nand/raw/ca_nand.c create mode 100644 drivers/mtd/nand/raw/ca_nand.h
MAINTAINERS +2 -0
@@ -181,6 +181,8 @@ F: drivers/gpio/cortina_gpio.c F: drivers/watchdog/cortina_wdt.c F: drivers/serial/serial_cortina.c F: drivers/mmc/ca_dw_mmc.c +F: drivers/mtd/nand/raw/ca_nand.c +F: drivers/mtd/nand/raw/ca_nand.h ARM/CZ.NIC TURRIS MOX SUPPORT M: Marek Behun <[email protected]>
drivers/mtd/nand/raw/Kconfig +31 -0
@@ -102,6 +102,37 @@ config NAND_BRCMNAND_63158 help Enable support for broadcom nand driver on bcm63158. +config NAND_CORTINA + tristate "Support Cortina-Access Parallel NAND cntlr." + select SYS_NAND_SELF_INIT + help + This enables the parallel RAW NAND driver for the + Cortina-Access CAxxxx Family of SoCs. + +config NAND_CORTINA_ECC_LEVEL + int "Cortina-Access Parallel Nand driver HW ECC algorithm" + default 3 + range 0 5 + depends on NAND_CORTINA + help + NAND Flash ECC algorithm. Value range from 0 to 5. + The default value is 3. + + 0: Hamming algorithm. Correct 3 bad bits in 256 btyes. + 1: Hamming algorithm. Correct 3 bad bits in 512 btyes. + 2: BCH algorithm. Correct 8 bad bits in 1K btyes. + 3: BCH algorithm. Correct 16 bad bits in 1K btyes. + 4: BCH algorithm. Correct 24 bad bits in 1K btyes. + 5: BCH algorithm. Correct 40 bad bits in 1K btyes. + +config NAND_CORTINA_ECC_HW_BCH + bool + default y + depends on NAND_CORTINA_ECC_LEVEL=2 \ + || NAND_CORTINA_ECC_LEVEL=3 \ + || NAND_CORTINA_ECC_LEVEL=4 \ + || NAND_CORTINA_ECC_LEVEL=5 + config NAND_DAVINCI bool "Support TI Davinci NAND controller" help
drivers/mtd/nand/raw/Makefile +1 -0
@@ -42,6 +42,7 @@ obj-$(CONFIG_NAND_ECC_BCH) += nand_bch.o obj-$(CONFIG_NAND_ATMEL) += atmel_nand.o obj-$(CONFIG_NAND_ARASAN) += arasan_nfc.o obj-$(CONFIG_NAND_BRCMNAND) += brcmnand/ +obj-$(CONFIG_NAND_CORTINA) += ca_nand.o obj-$(CONFIG_NAND_DAVINCI) += davinci_nand.o obj-$(CONFIG_NAND_DENALI) += denali.o obj-$(CONFIG_NAND_DENALI_DT) += denali_dt.o
drivers/mtd/nand/raw/ca_nand.c new file +4942 -0
2,948 lines not on this page · raw message
drivers/mtd/nand/raw/ca_nand.h new file +3899 -0
3,899 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.7.4
Part of the diff is not shown here. View the raw message.
PATCH v2 2/2 board: presidio-asic: Add RAW Parallel NAND support
Add Parallel NAND CAxxxx support to Cortina Access Presidio Engineering Board support
---
Changes in v2: None
configs/cortina_presidio-asic-bch16_defconfig | 35 ++++++++++++++++++++++++++ configs/cortina_presidio-asic-bch24_defconfig | 36 +++++++++++++++++++++++++++ configs/cortina_presidio-asic-bch40_defconfig | 36 +++++++++++++++++++++++++++ configs/cortina_presidio-asic-bch8_defconfig | 36 +++++++++++++++++++++++++++ include/configs/presidio_asic.h | 15 +++++++++++ 5 files changed, 158 insertions(+) create mode 100644 configs/cortina_presidio-asic-bch16_defconfig create mode 100644 configs/cortina_presidio-asic-bch24_defconfig create mode 100644 configs/cortina_presidio-asic-bch40_defconfig create mode 100644 configs/cortina_presidio-asic-bch8_defconfig
configs/cortina_presidio-asic-bch16_defconfig new file +35 -0
@@ -0,0 +1,35 @@ +CONFIG_ARM=y +# CONFIG_SYS_ARCH_TIMER is not set +CONFIG_TARGET_PRESIDIO_ASIC=y +CONFIG_SYS_TEXT_BASE=0x04000000 +CONFIG_ENV_SIZE=0x20000 +CONFIG_ENV_OFFSET=0x400000 +CONFIG_DM_GPIO=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_IDENT_STRING="Presidio-SoC" +CONFIG_SHOW_BOOT_PROGRESS=y +CONFIG_BOOTDELAY=3 +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SYS_PROMPT="G3#" +CONFIG_CMD_NAND=y +CONFIG_CMD_WDT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_SMC=y +CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" +CONFIG_ENV_IS_IN_NAND=y +# CONFIG_NET is not set +CONFIG_DM=y +CONFIG_CORTINA_GPIO=y +# CONFIG_MMC is not set +CONFIG_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_NAND_CORTINA=y +CONFIG_DM_SERIAL=y +CONFIG_CORTINA_UART=y +CONFIG_WDT=y +CONFIG_WDT_CORTINA=y
configs/cortina_presidio-asic-bch24_defconfig new file +36 -0
@@ -0,0 +1,36 @@ +CONFIG_ARM=y +# CONFIG_SYS_ARCH_TIMER is not set +CONFIG_TARGET_PRESIDIO_ASIC=y +CONFIG_SYS_TEXT_BASE=0x04000000 +CONFIG_ENV_SIZE=0x20000 +CONFIG_ENV_OFFSET=0x400000 +CONFIG_DM_GPIO=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_IDENT_STRING="Presidio-SoC" +CONFIG_SHOW_BOOT_PROGRESS=y +CONFIG_BOOTDELAY=3 +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SYS_PROMPT="G3#" +CONFIG_CMD_NAND=y +CONFIG_CMD_WDT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_SMC=y +CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" +CONFIG_ENV_IS_IN_NAND=y +# CONFIG_NET is not set +CONFIG_DM=y +CONFIG_CORTINA_GPIO=y +# CONFIG_MMC is not set +CONFIG_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_NAND_CORTINA=y +CONFIG_NAND_CORTINA_ECC_LEVEL=4 +CONFIG_DM_SERIAL=y +CONFIG_CORTINA_UART=y +CONFIG_WDT=y +CONFIG_WDT_CORTINA=y
configs/cortina_presidio-asic-bch40_defconfig new file +36 -0
@@ -0,0 +1,36 @@ +CONFIG_ARM=y +# CONFIG_SYS_ARCH_TIMER is not set +CONFIG_TARGET_PRESIDIO_ASIC=y +CONFIG_SYS_TEXT_BASE=0x04000000 +CONFIG_ENV_SIZE=0x20000 +CONFIG_ENV_OFFSET=0x400000 +CONFIG_DM_GPIO=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_IDENT_STRING="Presidio-SoC" +CONFIG_SHOW_BOOT_PROGRESS=y +CONFIG_BOOTDELAY=3 +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SYS_PROMPT="G3#" +CONFIG_CMD_NAND=y +CONFIG_CMD_WDT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_SMC=y +CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" +CONFIG_ENV_IS_IN_NAND=y +# CONFIG_NET is not set +CONFIG_DM=y +CONFIG_CORTINA_GPIO=y +# CONFIG_MMC is not set +CONFIG_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_NAND_CORTINA=y +CONFIG_NAND_CORTINA_ECC_LEVEL=5 +CONFIG_DM_SERIAL=y +CONFIG_CORTINA_UART=y +CONFIG_WDT=y +CONFIG_WDT_CORTINA=y
configs/cortina_presidio-asic-bch8_defconfig new file +36 -0
@@ -0,0 +1,36 @@ +CONFIG_ARM=y +# CONFIG_SYS_ARCH_TIMER is not set +CONFIG_TARGET_PRESIDIO_ASIC=y +CONFIG_SYS_TEXT_BASE=0x04000000 +CONFIG_ENV_SIZE=0x20000 +CONFIG_ENV_OFFSET=0x400000 +CONFIG_DM_GPIO=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_IDENT_STRING="Presidio-SoC" +CONFIG_SHOW_BOOT_PROGRESS=y +CONFIG_BOOTDELAY=3 +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SYS_PROMPT="G3#" +CONFIG_CMD_NAND=y +CONFIG_CMD_WDT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_SMC=y +CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" +CONFIG_ENV_IS_IN_NAND=y +# CONFIG_NET is not set +CONFIG_DM=y +CONFIG_CORTINA_GPIO=y +# CONFIG_MMC is not set +CONFIG_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_NAND_CORTINA=y +CONFIG_NAND_CORTINA_ECC_LEVEL=2 +CONFIG_DM_SERIAL=y +CONFIG_CORTINA_UART=y +CONFIG_WDT=y +CONFIG_WDT_CORTINA=y
include/configs/presidio_asic.h +15 -0
@@ -32,6 +32,8 @@#define CONFIG_SYS_TIMER_BASE 0xf4321000 +#define GLOBAL_SOFTWARE2 0xf43200c4 +/* Use external clock source */ #define PRESIDIO_APB_CLK 125000000#define CORTINA_PER_IO_FREQ PRESIDIO_APB_CLK
@@ -68,4 +70,17 @@#define CONFIG_SYS_MAXARGS 64#define CONFIG_EXTRA_ENV_SETTINGS "silent=y\0" +/* Macros for Flash */ +#define CORTINA_FLASH_CTRL_BASE 0xf4324000 +#define CORTINA_DMA_GLB_BASE 0xf7001000 +#define CORTINA_DMA_SSP_BASE 0xf7001a00 +#define CONFIG_SYS_FLASH_BASE 0xe0000000 + +#ifdef CONFIG_NAND_CORTINA +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_MAX_CHIPS 1 +#define CONFIG_SYS_NAND_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#endif +#endif /* __PRESIDIO_ASIC_H */
Signature · 1 line
2.7.4