Skip to contentSkip to conversation

selftsts/ftrace: Add requires list for each test case

PATCH In review Masami Hiramatsu 3 participants 17 messages Jun 3, 2020 – Jun 19, 2020

Subsystems (2)
lore
Share & tools
lore

Masami Hiramatsu

author maintainer
#0 lore raw

v3 cover selftsts/ftrace: Add requires list for each test case

Hi,

Here is the 3rd version of the series of "requires:" list for simplifying and unifying requirement checks for each test case.

The previous version is here.

https://lkml.kernel.org/r/159108888259.42416.547252366885528860.stgit@devnote2

I've fixed a comment in the template file in this version.

In short, this series introduces "requires:" line instead of checking required ftrace interfaces in each test case.

The requires line supports following checks
- tracefs interface check: Check whether the given file or directory in the tracefs. (No suffix) [3/7],[4/7],[5/7]
- available tracer check: Check whether the given tracer is available (":tracer" suffix) [6/7]
- README feature check: Check whether the given string is in the README (":README" suffix) [7/7]

This series also includes the description line fix and unresolved -> unsupported change ([1/7] and [2/7]).

Since this series depends on following 2 commits,

commit 619ee76f5c9f ("selftests/ftrace: Return unsupported if no
error_log file") on Shuah's Kselftest tree
commit bea24f766efc ("selftests/ftrace: Distinguish between hist
and synthetic event checks") on Steven's Tracing tree

This can be applied on the tree which merged both of them. Also, you can get the series from the following.

git://git.kernel.org/pub/scm/linux/kernel/git/mhiramat/linux.git ftracetest-requires-v3

Thank you,

---

Masami Hiramatsu (7):
selftests/ftrace: Allow ":" in description selftests/ftrace: Return unsupported for the unconfigured features selftests/ftrace: Add "requires:" list support selftests/ftrace: Convert required interface checks into requires list selftests/ftrace: Convert check_filter_file() with requires list selftests/ftrace: Support ":tracer" suffix for requires selftests/ftrace: Support ":README" suffix for requires

 tools/testing/selftests/ftrace/ftracetest          |   11 ++++++-
 .../selftests/ftrace/test.d/00basic/snapshot.tc    |    3 +-
 .../selftests/ftrace/test.d/00basic/trace_pipe.tc  |    3 +-
 .../ftrace/test.d/direct/kprobe-direct.tc          |    6 +---
 .../ftrace/test.d/dynevent/add_remove_kprobe.tc    |    6 +---
 .../ftrace/test.d/dynevent/add_remove_synth.tc     |    5 +--
 .../ftrace/test.d/dynevent/clear_select_events.tc  |   11 +------
 .../ftrace/test.d/dynevent/generic_clear_event.tc  |    8 +----
 .../selftests/ftrace/test.d/event/event-enable.tc  |    6 +---
 .../selftests/ftrace/test.d/event/event-no-pid.tc  |   11 +------
 .../selftests/ftrace/test.d/event/event-pid.tc     |   11 +------
 .../ftrace/test.d/event/subsystem-enable.tc        |    6 +---
 .../ftrace/test.d/event/toplevel-enable.tc         |    6 +---
 .../ftrace/test.d/ftrace/fgraph-filter-stack.tc    |   14 +--------
 .../ftrace/test.d/ftrace/fgraph-filter.tc          |    8 +----
 .../ftrace/test.d/ftrace/func-filter-glob.tc       |    8 +----
 .../test.d/ftrace/func-filter-notrace-pid.tc       |   13 +-------
 .../ftrace/test.d/ftrace/func-filter-pid.tc        |   13 +-------
 .../ftrace/test.d/ftrace/func-filter-stacktrace.tc |    3 +-
 .../selftests/ftrace/test.d/ftrace/func_cpumask.tc |    6 +---
 .../ftrace/test.d/ftrace/func_event_triggers.tc    |    7 ++---
 .../ftrace/test.d/ftrace/func_mod_trace.tc         |    3 +-
 .../ftrace/test.d/ftrace/func_profile_stat.tc      |    3 +-
 .../ftrace/test.d/ftrace/func_profiler.tc          |   12 +-------
 .../ftrace/test.d/ftrace/func_set_ftrace_file.tc   |    6 ++--
 .../ftrace/test.d/ftrace/func_stack_tracer.tc      |    8 +----
 .../test.d/ftrace/func_traceonoff_triggers.tc      |    6 ++--
 .../ftrace/test.d/ftrace/tracing-error-log.tc      |   12 ++------
 tools/testing/selftests/ftrace/test.d/functions    |   28 ++++++++++++++----
 .../ftrace/test.d/instances/instance-event.tc      |    6 +---
 .../selftests/ftrace/test.d/instances/instance.tc  |    6 +---
 .../ftrace/test.d/kprobe/add_and_remove.tc         |    3 +-
 .../selftests/ftrace/test.d/kprobe/busy_check.tc   |    3 +-
 .../selftests/ftrace/test.d/kprobe/kprobe_args.tc  |    3 +-
 .../ftrace/test.d/kprobe/kprobe_args_comm.tc       |    3 +-
 .../ftrace/test.d/kprobe/kprobe_args_string.tc     |    3 +-
 .../ftrace/test.d/kprobe/kprobe_args_symbol.tc     |    3 +-
 .../ftrace/test.d/kprobe/kprobe_args_syntax.tc     |    5 +--
 .../ftrace/test.d/kprobe/kprobe_args_type.tc       |    5 +--
 .../ftrace/test.d/kprobe/kprobe_args_user.tc       |    4 +--
 .../ftrace/test.d/kprobe/kprobe_eventname.tc       |    3 +-
 .../ftrace/test.d/kprobe/kprobe_ftrace.tc          |    6 +---
 .../ftrace/test.d/kprobe/kprobe_module.tc          |    3 +-
 .../ftrace/test.d/kprobe/kprobe_multiprobe.tc      |    5 +--
 .../ftrace/test.d/kprobe/kprobe_syntax_errors.tc   |    5 +--
 .../ftrace/test.d/kprobe/kretprobe_args.tc         |    3 +-
 .../ftrace/test.d/kprobe/kretprobe_maxactive.tc    |    4 +--
 .../ftrace/test.d/kprobe/multiple_kprobes.tc       |    3 +-
 .../selftests/ftrace/test.d/kprobe/probepoint.tc   |    3 +-
 .../selftests/ftrace/test.d/kprobe/profile.tc      |    3 +-
 .../ftrace/test.d/kprobe/uprobe_syntax_errors.tc   |    5 +--
 .../ftrace/test.d/preemptirq/irqsoff_tracer.tc     |    4 +--
 tools/testing/selftests/ftrace/test.d/template     |    4 +++
 .../selftests/ftrace/test.d/tracer/wakeup.tc       |    6 +---
 .../selftests/ftrace/test.d/tracer/wakeup_rt.tc    |    6 +---
 .../inter-event/trigger-action-hist-xfail.tc       |   13 +-------
 .../inter-event/trigger-field-variable-support.tc  |   16 +---------
 .../trigger-inter-event-combined-hist.tc           |   16 +---------
 .../inter-event/trigger-multi-actions-accept.tc    |   16 +---------
 .../inter-event/trigger-onchange-action-hist.tc    |    8 +----
 .../inter-event/trigger-onmatch-action-hist.tc     |   16 +---------
 .../trigger-onmatch-onmax-action-hist.tc           |   16 +---------
 .../inter-event/trigger-onmax-action-hist.tc       |   16 +---------
 .../inter-event/trigger-snapshot-action-hist.tc    |   20 +------------
 .../trigger-synthetic-event-createremove.tc        |   11 +------
 .../inter-event/trigger-synthetic-event-syntax.tc  |   11 +------
 .../inter-event/trigger-trace-action-hist.tc       |   18 +-----------
 .../ftrace/test.d/trigger/trigger-eventonoff.tc    |   11 +------
 .../ftrace/test.d/trigger/trigger-filter.tc        |   11 +------
 .../ftrace/test.d/trigger/trigger-hist-mod.tc      |   16 +---------
 .../test.d/trigger/trigger-hist-syntax-errors.tc   |   18 +-----------
 .../ftrace/test.d/trigger/trigger-hist.tc          |   16 +---------
 .../ftrace/test.d/trigger/trigger-multihist.tc     |   16 +---------
 .../ftrace/test.d/trigger/trigger-snapshot.tc      |   16 +---------
 .../ftrace/test.d/trigger/trigger-stacktrace.tc    |   11 +------
 .../test.d/trigger/trigger-trace-marker-hist.tc    |   21 +-------------
 .../trigger/trigger-trace-marker-snapshot.tc       |   21 +-------------
 .../trigger-trace-marker-synthetic-kernel.tc       |   31 +-------------------
 .../trigger/trigger-trace-marker-synthetic.tc      |   26 +----------------
 .../ftrace/test.d/trigger/trigger-traceonoff.tc    |   11 +------
 80 files changed, 119 insertions(+), 633 deletions(-)

--
Masami Hiramatsu (Linaro) <[email protected]>

author maintainer
#1 lore raw

PATCH v3 1/7 selftests/ftrace: Allow ":" in description

Allow ":" in the description line. Currently if there is ":" in the test description line, the description is cut at that point, but that was unintended.

---
 tools/testing/selftests/ftrace/ftracetest |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/ftrace/ftracetest +1 -1
index a4605b5ee66d..d3f6652311ef 100755
@@ -263,7 +263,7 @@ CASENO=0
 
 testcase() { # testfile
   CASENO=$((CASENO+1))
-  desc=`grep "^#[ \t]*description:" $1 | cut -f2 -d:`
+  desc=`grep "^#[ \t]*description:" $1 | cut -f2- -d:`
   prlog -n "[$CASENO]$INSTANCE$desc"
 }
 
author maintainer
#2 lore raw

PATCH v3 2/7 selftests/ftrace: Return unsupported for the unconfigured features

In reply to Masami Hiramatsu

As same as other test cases, return unsupported if kprobe_events or argument access feature are not found.

There can be a new arch which does not port those features yet, and an older kernel which doesn't support it.
Those can not enable the features.

---
 .../ftrace/test.d/direct/kprobe-direct.tc          |    2 +-
 .../ftrace/test.d/kprobe/kprobe_args_user.tc       |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
tools/testing/selftests/ftrace/test.d/direct/kprobe-direct.tc +1 -1
index 801ecb63e84c..e95b744b23e4 100644
@@ -10,7 +10,7 @@ fi
 
 if [ ! -f kprobe_events ]; then
 	echo "No kprobe_events file -please build CONFIG_KPROBE_EVENTS"
-	exit_unresolved;
+	exit_unsupported;
 fi
 
 echo "Let the module run a little"
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_user.tc +1 -1
index 0f60087583d8..b41471f301ab 100644
@@ -4,7 +4,7 @@
 
 [ -f kprobe_events ] || exit_unsupported # this is configurable
 
-grep -q '\$arg<N>' README || exit_unresolved # depends on arch
+grep -q '\$arg<N>' README || exit_unsupported # depends on arch
 grep -A10 "fetcharg:" README | grep -q 'ustring' || exit_unsupported
 grep -A10 "fetcharg:" README | grep -q '\[u\]<offset>' || exit_unsupported
 
author maintainer
#3 lore raw

PATCH v3 3/7 selftests/ftrace: Add "requires:" list support

In reply to Masami Hiramatsu

Introduce "requires:" list to check required ftrace interface for each test. This will simplify the interface checking code and unify the error message. Another good point is, it can skip the ftrace initializing.

Note that this requires list must be written as a shell comment.

---
Changes in v3:
- Fixes a comment in template file.

---
 tools/testing/selftests/ftrace/ftracetest       |    8 +++++++-
 tools/testing/selftests/ftrace/test.d/functions |    9 +++++++++
 tools/testing/selftests/ftrace/test.d/template  |    1 +
 3 files changed, 17 insertions(+), 1 deletion(-)
tools/testing/selftests/ftrace/ftracetest +7 -1
index d3f6652311ef..cdf7940b6610 100755
@@ -267,6 +267,11 @@ testcase() { # testfile
   prlog -n "[$CASENO]$INSTANCE$desc"
 }
 
+checkreq() { # testfile
+  requires=`grep "^#[ \t]*requires:" $1 | cut -f2- -d:`
+  check_requires $requires
+}
+
 test_on_instance() { # testfile
   grep -q "^#[ \t]*flags:.*instance" $1
 }
@@ -356,7 +361,8 @@ trap 'SIG_RESULT=$XFAIL' $SIG_XFAIL
 
 __run_test() { # testfile
   # setup PID and PPID, $$ is not updated.
-  (cd $TRACING_DIR; read PID _ < /proc/self/stat; set -e; set -x; initialize_ftrace; . $1)
+  (cd $TRACING_DIR; read PID _ < /proc/self/stat; set -e; set -x;
+   checkreq $1; initialize_ftrace; . $1)
   [ $? -ne 0 ] && kill -s $SIG_FAIL $SIG_PID
 }
 
tools/testing/selftests/ftrace/test.d/functions +9 -0
index 697c77ef2e2b..5100eb1ada0f 100644
@@ -113,6 +113,15 @@ initialize_ftrace() { # Reset ftrace to initial-state
     enable_tracing
 }
 
+check_requires() { # Check required files
+    for i in $* ; do
+        if [ ! -e $i ]; then
+            echo "Required feature interface $i doesn't exist."
+            exit_unsupported
+        fi
+    done
+}
+
 LOCALHOST=127.0.0.1
 
 yield() {
tools/testing/selftests/ftrace/test.d/template +1 -0
index e1a5d14c4eaf..611423c4e75f 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: %HERE DESCRIBE WHAT THIS DOES%
+# requires: %HERE LIST THE REQUIRED FILES%
 # you have to add ".tc" extention for your testcase file
 # Note that all tests are run with "errexit" option.
 
author maintainer
#4 lore raw

PATCH v3 4/7 selftests/ftrace: Convert required interface checks into requires list

In reply to Masami Hiramatsu

Convert the required tracefs interface checking code with
requires: list.

---
Changes in v2: Fix trigger-onchange-action-hist.tc requires list.

---
 .../selftests/ftrace/test.d/00basic/snapshot.tc    |    3 +-
 .../selftests/ftrace/test.d/00basic/trace_pipe.tc  |    3 +-
 .../ftrace/test.d/direct/kprobe-direct.tc          |    6 +---
 .../ftrace/test.d/dynevent/add_remove_kprobe.tc    |    3 +-
 .../ftrace/test.d/dynevent/add_remove_synth.tc     |    3 +-
 .../ftrace/test.d/dynevent/clear_select_events.tc  |    6 +---
 .../ftrace/test.d/dynevent/generic_clear_event.tc  |    3 +-
 .../selftests/ftrace/test.d/event/event-enable.tc  |    6 +---
 .../selftests/ftrace/test.d/event/event-no-pid.tc  |   11 +------
 .../selftests/ftrace/test.d/event/event-pid.tc     |   11 +------
 .../ftrace/test.d/event/subsystem-enable.tc        |    6 +---
 .../ftrace/test.d/event/toplevel-enable.tc         |    6 +---
 .../ftrace/test.d/ftrace/fgraph-filter-stack.tc    |    7 +----
 .../test.d/ftrace/func-filter-notrace-pid.tc       |    6 +---
 .../ftrace/test.d/ftrace/func-filter-pid.tc        |    6 +---
 .../ftrace/test.d/ftrace/func_profile_stat.tc      |    3 +-
 .../ftrace/test.d/ftrace/func_profiler.tc          |    6 +---
 .../ftrace/test.d/ftrace/func_stack_tracer.tc      |    6 +---
 .../ftrace/test.d/ftrace/tracing-error-log.tc      |   12 ++------
 .../ftrace/test.d/instances/instance-event.tc      |    6 +---
 .../selftests/ftrace/test.d/instances/instance.tc  |    6 +---
 .../ftrace/test.d/kprobe/add_and_remove.tc         |    3 +-
 .../selftests/ftrace/test.d/kprobe/busy_check.tc   |    3 +-
 .../selftests/ftrace/test.d/kprobe/kprobe_args.tc  |    3 +-
 .../ftrace/test.d/kprobe/kprobe_args_comm.tc       |    3 +-
 .../ftrace/test.d/kprobe/kprobe_args_string.tc     |    3 +-
 .../ftrace/test.d/kprobe/kprobe_args_symbol.tc     |    3 +-
 .../ftrace/test.d/kprobe/kprobe_args_syntax.tc     |    3 +-
 .../ftrace/test.d/kprobe/kprobe_args_type.tc       |    3 +-
 .../ftrace/test.d/kprobe/kprobe_args_user.tc       |    3 +-
 .../ftrace/test.d/kprobe/kprobe_eventname.tc       |    3 +-
 .../ftrace/test.d/kprobe/kprobe_ftrace.tc          |    2 +
 .../ftrace/test.d/kprobe/kprobe_module.tc          |    3 +-
 .../ftrace/test.d/kprobe/kprobe_multiprobe.tc      |    3 +-
 .../ftrace/test.d/kprobe/kprobe_syntax_errors.tc   |    5 +--
 .../ftrace/test.d/kprobe/kretprobe_args.tc         |    3 +-
 .../ftrace/test.d/kprobe/kretprobe_maxactive.tc    |    2 +
 .../ftrace/test.d/kprobe/multiple_kprobes.tc       |    3 +-
 .../selftests/ftrace/test.d/kprobe/probepoint.tc   |    3 +-
 .../selftests/ftrace/test.d/kprobe/profile.tc      |    3 +-
 .../ftrace/test.d/kprobe/uprobe_syntax_errors.tc   |    5 +--
 .../inter-event/trigger-action-hist-xfail.tc       |   11 +------
 .../inter-event/trigger-field-variable-support.tc  |   16 +---------
 .../trigger-inter-event-combined-hist.tc           |   16 +---------
 .../inter-event/trigger-multi-actions-accept.tc    |   16 +---------
 .../inter-event/trigger-onchange-action-hist.tc    |    6 +---
 .../inter-event/trigger-onmatch-action-hist.tc     |   16 +---------
 .../trigger-onmatch-onmax-action-hist.tc           |   16 +---------
 .../inter-event/trigger-onmax-action-hist.tc       |   16 +---------
 .../inter-event/trigger-snapshot-action-hist.tc    |   16 +---------
 .../trigger-synthetic-event-createremove.tc        |   11 +------
 .../inter-event/trigger-synthetic-event-syntax.tc  |   11 +------
 .../inter-event/trigger-trace-action-hist.tc       |   16 +---------
 .../ftrace/test.d/trigger/trigger-eventonoff.tc    |   11 +------
 .../ftrace/test.d/trigger/trigger-filter.tc        |   11 +------
 .../ftrace/test.d/trigger/trigger-hist-mod.tc      |   16 +---------
 .../test.d/trigger/trigger-hist-syntax-errors.tc   |   18 +-----------
 .../ftrace/test.d/trigger/trigger-hist.tc          |   16 +---------
 .../ftrace/test.d/trigger/trigger-multihist.tc     |   16 +---------
 .../ftrace/test.d/trigger/trigger-snapshot.tc      |   16 +---------
 .../ftrace/test.d/trigger/trigger-stacktrace.tc    |   11 +------
 .../test.d/trigger/trigger-trace-marker-hist.tc    |   21 +-------------
 .../trigger/trigger-trace-marker-snapshot.tc       |   21 +-------------
 .../trigger-trace-marker-synthetic-kernel.tc       |   31 +-------------------
 .../trigger/trigger-trace-marker-synthetic.tc      |   26 +----------------
 .../ftrace/test.d/trigger/trigger-traceonoff.tc    |   11 +------
 66 files changed, 68 insertions(+), 511 deletions(-)
tools/testing/selftests/ftrace/test.d/00basic/snapshot.tc +1 -2
index 3b1f45e13a2e..13b4dabcf46e 100644
@@ -1,9 +1,8 @@
 #!/bin/sh
 # description: Snapshot and tracing setting
+# requires: snapshot
 # flags: instance
 
-[ ! -f snapshot ] && exit_unsupported
-
 echo "Set tracing off"
 echo 0 > tracing_on
 
tools/testing/selftests/ftrace/test.d/00basic/trace_pipe.tc +1 -2
index 5058fbcfd90f..435d07b13407 100644
@@ -1,10 +1,9 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: trace_pipe and trace_marker
+# requires: trace_marker
 # flags: instance
 
-[ ! -f trace_marker ] && exit_unsupported
-
 echo "test input 1" > trace_marker
 
 : "trace interface never consume the ring buffer"
tools/testing/selftests/ftrace/test.d/direct/kprobe-direct.tc +1 -5
index e95b744b23e4..e52e470a1f8f 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Test ftrace direct functions against kprobes
+# requires: kprobe_events
 
 rmmod ftrace-direct ||:
 if ! modprobe ftrace-direct ; then
@@ -8,11 +9,6 @@ if ! modprobe ftrace-direct ; then
   exit_unresolved;
 fi
 
-if [ ! -f kprobe_events ]; then
-	echo "No kprobe_events file -please build CONFIG_KPROBE_EVENTS"
-	exit_unsupported;
-fi
-
 echo "Let the module run a little"
 sleep 1
 
tools/testing/selftests/ftrace/test.d/dynevent/add_remove_kprobe.tc +1 -2
index c6d8387dbbb8..1a8c56b197a8 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Generic dynamic event - add/remove kprobe events
-
-[ -f dynamic_events ] || exit_unsupported
+# requires: dynamic_events
 
 grep -q "place: \[<module>:\]<symbol>" README || exit_unsupported
 grep -q "place (kretprobe): \[<module>:\]<symbol>" README || exit_unsupported
tools/testing/selftests/ftrace/test.d/dynevent/add_remove_synth.tc +1 -2
index 62b77b5941d0..f5018b3afb39 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Generic dynamic event - add/remove synthetic events
-
-[ -f dynamic_events ] || exit_unsupported
+# requires: dynamic_events
 
 grep -q "s:\[synthetic/\]" README || exit_unsupported
 
tools/testing/selftests/ftrace/test.d/dynevent/clear_select_events.tc +1 -5
index e0842109cb57..e2484445ddec 100644
@@ -1,17 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Generic dynamic event - selective clear (compatibility)
-
-[ -f dynamic_events ] || exit_unsupported
+# requires: dynamic_events kprobe_events synthetic_events
 
 grep -q "place: \[<module>:\]<symbol>" README || exit_unsupported
 grep -q "place (kretprobe): \[<module>:\]<symbol>" README || exit_unsupported
 
 grep -q "s:\[synthetic/\]" README || exit_unsupported
 
-[ -f synthetic_events ] || exit_unsupported
-[ -f kprobe_events ] || exit_unsupported
-
 echo 0 > events/enable
 echo > dynamic_events
 
tools/testing/selftests/ftrace/test.d/dynevent/generic_clear_event.tc +1 -2
index 901922e97878..e56cb60b4e56 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Generic dynamic event - generic clear event
-
-[ -f dynamic_events ] || exit_unsupported
+# requires: dynamic_events
 
 grep -q "place: \[<module>:\]<symbol>" README || exit_unsupported
 grep -q "place (kretprobe): \[<module>:\]<symbol>" README || exit_unsupported
tools/testing/selftests/ftrace/test.d/event/event-enable.tc +1 -5
index dfb0d5122f7b..cfe5bd2d4267 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event tracing - enable/disable with event level files
+# requires: set_event events/sched
 # flags: instance
 
 do_reset() {
@@ -13,11 +14,6 @@ fail() { #msg
     exit_fail
 }
 
-if [ ! -f set_event -o ! -d events/sched ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
 echo 'sched:sched_switch' > set_event
 
 yield
tools/testing/selftests/ftrace/test.d/event/event-no-pid.tc +1 -10
index f0f366f18d0c..e6eb78f0b954 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event tracing - restricts events based on pid notrace filtering
+# requires: set_event events/sched set_event_pid set_event_notrace_pid
 # flags: instance
 
 do_reset() {
@@ -56,16 +57,6 @@ enable_events() {
     echo 1 > tracing_on
 }
 
-if [ ! -f set_event -o ! -d events/sched ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f set_event_pid -o ! -f set_event_notrace_pid ]; then
-    echo "event pid notrace filtering is not supported"
-    exit_unsupported
-fi
-
 echo 0 > options/event-fork
 
 do_reset
tools/testing/selftests/ftrace/test.d/event/event-pid.tc +1 -10
index f9cb214220b1..7f5f97dffdc3 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event tracing - restricts events based on pid
+# requires: set_event set_event_pid events/sched
 # flags: instance
 
 do_reset() {
@@ -16,16 +17,6 @@ fail() { #msg
     exit_fail
 }
 
-if [ ! -f set_event -o ! -d events/sched ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f set_event_pid ]; then
-    echo "event pid filtering is not supported"
-    exit_unsupported
-fi
-
 echo 0 > options/event-fork
 
 echo 1 > events/sched/sched_switch/enable
tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc +1 -5
index 83a8c571e93a..b1ede6249866 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event tracing - enable/disable with subsystem level files
+# requires: set_event events/sched/enable
 # flags: instance
 
 do_reset() {
@@ -13,11 +14,6 @@ fail() { #msg
     exit_fail
 }
 
-if [ ! -f set_event -o ! -d events/sched ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
 echo 'sched:*' > set_event
 
 yield
tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc +1 -5
index 84d7bda08d2a..93c10ea42a68 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event tracing - enable/disable with top level files
+# requires: available_events set_event events/enable
 
 do_reset() {
     echo > set_event
@@ -12,11 +13,6 @@ fail() { #msg
     exit_fail
 }
 
-if [ ! -f available_events -o ! -f set_event -o ! -d events ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
 echo '*:*' > set_event
 
 yield
tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc +1 -6
index f59853857ad2..8dd22561d5b0 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function graph filters with stack tracer
+# requires: stack_trace
 
 # Make sure that function graph filtering works, and is not
 # affected by other tracers enabled (like stack tracer)
@@ -37,12 +38,6 @@ fi
 
 echo function_graph > current_tracer
 
-if [ ! -f stack_trace ]; then
-    echo "Stack tracer not configured"
-    do_reset
-    exit_unsupported;
-fi
-
 echo "Now testing with stack tracer"
 
 echo 1 > /proc/sys/kernel/stack_tracer_enabled
tools/testing/selftests/ftrace/test.d/ftrace/func-filter-notrace-pid.tc +1 -5
index 71db68a7975f..799cd1b9c42c 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function pid notrace filters
+# requires: set_ftrace_notrace_pid
 # flags: instance
 
 # Make sure that function pid matching filter with notrace works.
@@ -10,11 +11,6 @@ if ! grep -q function available_tracers; then
     exit_unsupported
 fi
 
-if [ ! -f set_ftrace_notrace_pid ]; then
-    echo "set_ftrace_notrace_pid not found? Is function tracer not set?"
-    exit_unsupported
-fi
-
 check_filter_file set_ftrace_filter
 
 do_function_fork=1
tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc +1 -5
index d58403c4b7cd..9497031913bb 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function pid filters
+# requires: set_ftrace_pid
 # flags: instance
 
 # Make sure that function pid matching filter works.
@@ -11,11 +12,6 @@ if ! grep -q function available_tracers; then
     exit_unsupported
 fi
 
-if [ ! -f set_ftrace_pid ]; then
-    echo "set_ftrace_pid not found? Is function tracer not set?"
-    exit_unsupported
-fi
-
 check_filter_file set_ftrace_filter
 
 do_function_fork=1
tools/testing/selftests/ftrace/test.d/ftrace/func_profile_stat.tc +1 -2
index 0d501058aa75..4daeffb02fd8 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function profiling
-
-[ ! -f function_profile_enabled ] && exit_unsupported
+# requires: function_profile_enabled
 
 : "Enable function profile"
 echo 1 > function_profile_enabled
tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc +1 -5
index a3dadb6b93b4..817d504f751c 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function profiler with function tracing
+# requires: function_profile_enabled
 
 # There was a bug after a rewrite of the ftrace infrastructure that
 # caused the function_profiler not to be able to run with the function
@@ -20,11 +21,6 @@ fi
 
 check_filter_file set_ftrace_filter
 
-if [ ! -f function_profile_enabled ]; then
-    echo "function_profile_enabled not found, function profiling enabled?"
-    exit_unsupported
-fi
-
 fail() { # mesg
     echo $1
     exit_fail
tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc +1 -5
index 51e9e80bc0e6..b3d78ef6c639 100644
@@ -1,13 +1,9 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - Max stack tracer
+# requires: stack_trace
 # Test the basic function of max-stack usage tracing
 
-if [ ! -f stack_trace ]; then
-  echo "Max stack tracer is not supported - please make CONFIG_STACK_TRACER=y"
-  exit_unsupported
-fi
-
 check_filter_file stack_trace_filter
 
 echo > stack_trace_filter
tools/testing/selftests/ftrace/test.d/ftrace/tracing-error-log.tc +3 -9
index 23465823532b..6c190620db47 100644
@@ -1,21 +1,15 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - test tracing error log support
+# event tracing is currently the only ftrace tracer that uses the
+# tracing error_log, hence this check
+# requires: set_event error_log
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-# event tracing is currently the only ftrace tracer that uses the
-# tracing error_log, hence this check
-if [ ! -f set_event ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-[ -f error_log ] || exit_unsupported
-
 ftrace_errlog_check 'event filter parse error' '((sig >= 10 && sig < 15) || dsig ^== 17) && comm != bash' 'events/signal/signal_generate/filter'
 
 exit 0
tools/testing/selftests/ftrace/test.d/instances/instance-event.tc +1 -5
index 4fa0f79144f4..0eb47fbb3f44 100644
@@ -1,11 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Test creation and deletion of trace instances while setting an event
-
-if [ ! -d instances ] ; then
-    echo "no instance directory with this kernel"
-    exit_unsupported;
-fi
+# requires: instances
 
 fail() { # mesg
     rmdir foo 2>/dev/null
tools/testing/selftests/ftrace/test.d/instances/instance.tc +1 -5
index b84651283bf3..607521d2592b 100644
@@ -1,11 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Test creation and deletion of trace instances
-
-if [ ! -d instances ] ; then
-    echo "no instance directory with this kernel"
-    exit_unsupported;
-fi
+# requires: instances
 
 fail() { # mesg
     rmdir x y z 2>/dev/null
tools/testing/selftests/ftrace/test.d/kprobe/add_and_remove.tc +1 -2
index bb1eb5a7c64e..eba858c21815 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobe dynamic event - adding and removing
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
 
 echo p:myevent _do_fork > kprobe_events
 grep myevent kprobe_events
tools/testing/selftests/ftrace/test.d/kprobe/busy_check.tc +1 -2
index 442c1a8c5edf..d10bf4f05bc8 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobe dynamic event - busy event check
-
-[ -f kprobe_events ] || exit_unsupported
+# requires: kprobe_events
 
 echo p:myevent _do_fork > kprobe_events
 test -d events/kprobes/myevent
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc +1 -2
index bcdecf80a8f1..61f2ac441aec 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobe dynamic event with arguments
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
 
 echo 'p:testprobe _do_fork $stack $stack0 +0($stack)' > kprobe_events
 grep testprobe kprobe_events | grep -q 'arg1=\$stack arg2=\$stack0 arg3=+0(\$stack)'
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_comm.tc +1 -2
index 15c1f70fcaf9..05aaeed6987f 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobe event with comm arguments
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
 
 grep -A1 "fetcharg:" README | grep -q "\$comm" || exit_unsupported # this is too old
 
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc +1 -2
index 46e7744f8358..b5fa05443b39 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobe event string type argument
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
 
 case `uname -m` in
 x86_64)
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_symbol.tc +1 -2
index 2b6dd33f9076..b8c75a3d003c 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobe event symbol argument
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
 
 SYMBOL="linux_proc_banner"
 
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc +1 -2
index 6f0f19953193..f06c1477f00f 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobe event argument syntax
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
 
 grep "x8/16/32/64" README > /dev/null || exit_unsupported # version issue
 
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc +1 -2
index 81490ecaaa92..d599d6f544d4 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobes event arguments with types
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
 
 grep "x8/16/32/64" README > /dev/null || exit_unsupported # version issue
 
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_user.tc +1 -2
index b41471f301ab..a9b3a788183f 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobe event user-memory access
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
 
 grep -q '\$arg<N>' README || exit_unsupported # depends on arch
 grep -A10 "fetcharg:" README | grep -q 'ustring' || exit_unsupported
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_eventname.tc +1 -2
index 3ff236719b6e..1f6981ef7afa 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobe event auto/manual naming
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
 
 :;: "Add an event on function without name" ;:
 
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc +1 -1
index df5072815b87..b7f8536438bd 100644
@@ -1,8 +1,8 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobe dynamic event with function tracer
+# requires: kprobe_events
 
-[ -f kprobe_events ] || exit_unsupported # this is configurable
 grep "function" available_tracers || exit_unsupported # this is configurable
 
 check_filter_file set_ftrace_filter
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc +1 -2
index d861bd776c5e..7e74ee11edf9 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobe dynamic event - probing module
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
 
 rmmod trace-printk ||:
 if ! modprobe trace-printk ; then
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_multiprobe.tc +1 -2
index 44494bac86d1..8205d588bed4 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Create/delete multiprobe on kprobe event
-
-[ -f kprobe_events ] || exit_unsupported
+# requires: kprobe_events
 
 grep -q "Create/append/" README || exit_unsupported
 
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc +1 -4
index eb0f4ab4e070..b4d834675e59 100644
@@ -1,10 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobe event parser error log check
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
-
-[ -f error_log ] || exit_unsupported
+# requires: kprobe_events error_log
 
 check_error() { # command-with-error-pos-by-^
     ftrace_errlog_check 'trace_kprobe' "$1" 'kprobe_events'
tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc +1 -2
index ac9ab4a12e53..523fde6d1aa5 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kretprobe dynamic event with arguments
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
 
 # Add new kretprobe event
 echo 'r:testprobe2 _do_fork $retval' > kprobe_events
tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_maxactive.tc +1 -1
index 8e05b178519a..0f96a45010d1 100644
@@ -1,8 +1,8 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kretprobe dynamic event with maxactive
+# requires: kprobe_events
 
-[ -f kprobe_events ] || exit_unsupported # this is configurable
 grep -q 'r\[maxactive\]' README || exit_unsupported # this is older version
 
 # Test if we successfully reject unknown messages
tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc +1 -2
index 6e3dbe5f96b7..312d23780096 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Register/unregister many kprobe events
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
 
 # ftrace fentry skip size depends on the machine architecture.
 # Currently HAVE_KPROBES_ON_FTRACE defined on x86 and powerpc64le
tools/testing/selftests/ftrace/test.d/kprobe/probepoint.tc +1 -2
index a902aa0aaabc..624269c8d534 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobe events - probe points
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
 
 TARGET_FUNC=tracefs_create_dir
 
tools/testing/selftests/ftrace/test.d/kprobe/profile.tc +1 -2
index 0384b525cdee..ff6c44adc8a0 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobe dynamic event - adding and removing
-
-[ -f kprobe_events ] || exit_unsupported # this is configurable
+# requires: kprobe_events
 
 ! grep -q 'myevent' kprobe_profile
 echo p:myevent _do_fork > kprobe_events
tools/testing/selftests/ftrace/test.d/kprobe/uprobe_syntax_errors.tc +1 -4
index 14229d5778a0..7b5b60c3c5a2 100644
@@ -1,10 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Uprobe event parser error log check
-
-[ -f uprobe_events ] || exit_unsupported # this is configurable
-
-[ -f error_log ] || exit_unsupported
+# requires: uprobe_events error_log
 
 check_error() { # command-with-error-pos-by-^
     ftrace_errlog_check 'trace_uprobe' "$1" 'uprobe_events'
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-action-hist-xfail.tc +1 -10
index 3f2aee115f6e..07093bbd9816 100644
@@ -1,22 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test inter-event histogram trigger expected fail actions
+# requires: set_event snapshot
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-if [ ! -f set_event ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f snapshot ]; then
-    echo "snapshot is not supported"
-    exit_unsupported
-fi
-
 grep -q "snapshot()" README || exit_unsupported # version issue
 
 echo "Test expected snapshot action failure"
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-field-variable-support.tc +1 -15
index e232059a8ab2..41119e0440e9 100644
@@ -1,27 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test field variable support
+# requires: set_event synthetic_events events/sched/sched_process_fork/hist
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-if [ ! -f set_event ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
-    echo "synthetic event is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
-    echo "hist trigger is not supported"
-    exit_unsupported
-fi
-
 echo "Test field variable support"
 
 echo 'wakeup_latency u64 lat; pid_t pid; int prio; char comm[16]' > synthetic_events
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc +1 -15
index 07cfcb8157b6..7449a4b8f1f9 100644
@@ -1,27 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test inter-event combined histogram trigger
+# requires: set_event synthetic_events events/sched/sched_process_fork/hist
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-if [ ! -f set_event ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
-    echo "synthetic event is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
-    echo "hist trigger is not supported"
-    exit_unsupported
-fi
-
 echo "Test create synthetic event"
 
 echo 'waking_latency  u64 lat pid_t pid' > synthetic_events
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-multi-actions-accept.tc +1 -15
index 73e413c2ca26..3ad6e3fd8ac9 100644
@@ -1,27 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test multiple actions on hist trigger
+# requires: set_event synthetic_events events/sched/sched_process_fork/hist
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-if [ ! -f set_event ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
-    echo "synthetic event is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
-    echo "hist trigger is not supported"
-    exit_unsupported
-fi
-
 echo "Test multiple actions on hist trigger"
 echo 'wakeup_latency u64 lat; pid_t pid' >> synthetic_events
 TRIGGER1=events/sched/sched_wakeup/trigger
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onchange-action-hist.tc +1 -5
index c80007aa9f86..2366a8f8f8f2 100644
@@ -1,17 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test inter-event histogram trigger onchange action
+# requires: set_event
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-if [ ! -f set_event ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
 grep -q "onchange(var)" README || exit_unsupported # version issue
 
 echo "Test onchange action"
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-action-hist.tc +1 -15
index ebe0ad827f9f..20e39471052e 100644
@@ -1,27 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test inter-event histogram trigger onmatch action
+# requires: set_event synthetic_events events/sched/sched_process_fork/hist
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-if [ ! -f set_event ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
-    echo "synthetic event is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
-    echo "hist trigger is not supported"
-    exit_unsupported
-fi
-
 echo "Test create synthetic event"
 
 echo 'wakeup_latency  u64 lat pid_t pid char comm[16]' > synthetic_events
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-onmax-action-hist.tc +1 -15
index 2a2ef767249e..f4b03ab7c287 100644
@@ -1,27 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test inter-event histogram trigger onmatch-onmax action
+# requires: set_event synthetic_events events/sched/sched_process_fork/hist
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-if [ ! -f set_event ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
-    echo "synthetic event is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
-    echo "hist trigger is not supported"
-    exit_unsupported
-fi
-
 echo "Test create synthetic event"
 
 echo 'wakeup_latency  u64 lat pid_t pid char comm[16]' > synthetic_events
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmax-action-hist.tc +1 -15
index 98d73bfb0296..71c9b5911c70 100644
@@ -1,27 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test inter-event histogram trigger onmax action
+# requires: set_event synthetic_events events/sched/sched_process_fork/hist
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-if [ ! -f set_event ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
-    echo "synthetic event is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
-    echo "hist trigger is not supported"
-    exit_unsupported
-fi
-
 echo "Test create synthetic event"
 
 echo 'wakeup_latency  u64 lat pid_t pid char comm[16]' > synthetic_events
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-snapshot-action-hist.tc +1 -15
index 01b01b9c4e07..2902a897255f 100644
@@ -1,27 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test inter-event histogram trigger snapshot action
+# requires: set_event snapshot events/sched/sched_process_fork/hist
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-if [ ! -f set_event ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
-    echo "hist trigger is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f snapshot ]; then
-    echo "snapshot is not supported"
-    exit_unsupported
-fi
-
 grep -q "onchange(var)" README || exit_unsupported # version issue
 
 grep -q "snapshot()" README || exit_unsupported # version issue
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-createremove.tc +1 -10
index df44b14724a4..a152b558b40a 100644
@@ -1,22 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test synthetic event create remove
+# requires: set_event synthetic_events
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-if [ ! -f set_event ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
-    echo "synthetic event is not supported"
-    exit_unsupported
-fi
-
 echo "Test create synthetic event"
 
 echo 'wakeup_latency  u64 lat pid_t pid char comm[16]' > synthetic_events
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-syntax.tc +1 -10
index 88e6c3f43006..59216f3cfb12 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test synthetic_events syntax parser
+# requires: set_event synthetic_events
 
 do_reset() {
     reset_trigger
@@ -14,16 +15,6 @@ fail() { #msg
     exit_fail
 }
 
-if [ ! -f set_event ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
-    echo "synthetic event is not supported"
-    exit_unsupported
-fi
-
 reset_tracer
 do_reset
 
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-trace-action-hist.tc +1 -15
index c3baa486aeb4..e2ef5268b7e9 100644
@@ -1,27 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test inter-event histogram trigger trace action
+# requires: set_event synthetic_events events/sched/sched_process_fork/hist
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-if [ ! -f set_event ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
-    echo "synthetic event is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
-    echo "hist trigger is not supported"
-    exit_unsupported
-fi
-
 grep -q "trace(<synthetic_event>" README || exit_unsupported # version issue
 
 echo "Test create synthetic event"
tools/testing/selftests/ftrace/test.d/trigger/trigger-eventonoff.tc +1 -10
index eddb51e1fbf7..c226acee74bf 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test event enable/disable trigger
+# requires: set_event events/sched/sched_process_fork/trigger
 # flags: instance
 
 fail() { #msg
@@ -8,16 +9,6 @@ fail() { #msg
     exit_fail
 }
 
-if [ ! -f set_event -o ! -d events/sched ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/trigger ]; then
-    echo "event trigger is not supported"
-    exit_unsupported
-fi
-
 FEATURE=`grep enable_event events/sched/sched_process_fork/trigger`
 if [ -z "$FEATURE" ]; then
     echo "event enable/disable trigger is not supported"
tools/testing/selftests/ftrace/test.d/trigger/trigger-filter.tc +1 -10
index 2dcc2296ebdd..d9a198cb0f81 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test trigger filter
+# requires: set_event events/sched/sched_process_fork/trigger
 # flags: instance
 
 fail() { #msg
@@ -8,16 +9,6 @@ fail() { #msg
     exit_fail
 }
 
-if [ ! -f set_event -o ! -d events/sched ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/trigger ]; then
-    echo "event trigger is not supported"
-    exit_unsupported
-fi
-
 echo "Test trigger filter"
 echo 1 > tracing_on
 echo 'traceoff if child_pid == 0' > events/sched/sched_process_fork/trigger
tools/testing/selftests/ftrace/test.d/trigger/trigger-hist-mod.tc +1 -15
index fab4431639d3..4562e13cb26b 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test histogram modifiers
+# requires: set_event events/sched/sched_process_fork/trigger events/sched/sched_process_fork/hist
 # flags: instance
 
 fail() { #msg
@@ -8,21 +9,6 @@ fail() { #msg
     exit_fail
 }
 
-if [ ! -f set_event -o ! -d events/sched ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/trigger ]; then
-    echo "event trigger is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
-    echo "hist trigger is not supported"
-    exit_unsupported
-fi
-
 echo "Test histogram with execname modifier"
 
 echo 'hist:keys=common_pid.execname' > events/sched/sched_process_fork/trigger
tools/testing/selftests/ftrace/test.d/trigger/trigger-hist-syntax-errors.tc +1 -17
index d44087a2f3d1..52cfe7828e8a 100644
@@ -1,23 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test histogram parser errors
-
-if [ ! -f set_event -o ! -d events/kmem ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/kmem/kmalloc/trigger ]; then
-    echo "event trigger is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/kmem/kmalloc/hist ]; then
-    echo "hist trigger is not supported"
-    exit_unsupported
-fi
-
-[ -f error_log ] || exit_unsupported
+# requires: set_event events/kmem/kmalloc/trigger events/kmem/kmalloc/hist error_log
 
 check_error() { # command-with-error-pos-by-^
     ftrace_errlog_check 'hist:kmem:kmalloc' "$1" 'events/kmem/kmalloc/trigger'
tools/testing/selftests/ftrace/test.d/trigger/trigger-hist.tc +1 -15
index 177e8d4c4744..0e490921c724 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test histogram trigger
+# requires: set_event events/sched/sched_process_fork/trigger events/sched/sched_process_fork/hist
 # flags: instance
 
 fail() { #msg
@@ -8,21 +9,6 @@ fail() { #msg
     exit_fail
 }
 
-if [ ! -f set_event -o ! -d events/sched ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/trigger ]; then
-    echo "event trigger is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
-    echo "hist trigger is not supported"
-    exit_unsupported
-fi
-
 echo "Test histogram basic tigger"
 
 echo 'hist:keys=parent_pid:vals=child_pid' > events/sched/sched_process_fork/trigger
tools/testing/selftests/ftrace/test.d/trigger/trigger-multihist.tc +1 -15
index 68ff3f45c720..7129b52da947 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test multiple histogram triggers
+# requires: set_event events/sched/sched_process_fork/trigger events/sched/sched_process_fork/hist
 # flags: instance
 
 fail() { #msg
@@ -8,21 +9,6 @@ fail() { #msg
     exit_fail
 }
 
-if [ ! -f set_event -o ! -d events/sched ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/trigger ]; then
-    echo "event trigger is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/hist ]; then
-    echo "hist trigger is not supported"
-    exit_unsupported
-fi
-
 echo "Test histogram multiple triggers"
 
 echo 'hist:keys=parent_pid:vals=child_pid' > events/sched/sched_process_fork/trigger
tools/testing/selftests/ftrace/test.d/trigger/trigger-snapshot.tc +1 -15
index ac738500d17f..33f5bdee387f 100644
@@ -1,27 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test snapshot-trigger
+# requires: set_event events/sched/sched_process_fork/trigger snapshot
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-if [ ! -f set_event -o ! -d events/sched ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/trigger ]; then
-    echo "event trigger is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f snapshot ]; then
-    echo "snapshot is not supported"
-    exit_unsupported
-fi
-
 FEATURE=`grep snapshot events/sched/sched_process_fork/trigger`
 if [ -z "$FEATURE" ]; then
     echo "snapshot trigger is not supported"
tools/testing/selftests/ftrace/test.d/trigger/trigger-stacktrace.tc +1 -10
index 398c05c4d2a7..1fe8e008b14f 100644
@@ -1,22 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test stacktrace-trigger
+# requires: set_event events/sched/sched_process_fork/trigger
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-if [ ! -f set_event -o ! -d events/sched ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/trigger ]; then
-    echo "event trigger is not supported"
-    exit_unsupported
-fi
-
 FEATURE=`grep stacktrace events/sched/sched_process_fork/trigger`
 if [ -z "$FEATURE" ]; then
     echo "stacktrace trigger is not supported"
tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-hist.tc +1 -20
index ab6bedb25736..c1e947864a71 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: trace_marker trigger - test histogram trigger
+# requires: set_event events/ftrace/print/trigger events/ftrace/print/hist
 # flags: instance
 
 fail() { #msg
@@ -8,26 +9,6 @@ fail() { #msg
     exit_fail
 }
 
-if [ ! -f set_event ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -d events/ftrace/print ]; then
-    echo "event trace_marker is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/ftrace/print/trigger ]; then
-    echo "event trigger is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/ftrace/print/hist ]; then
-    echo "hist trigger is not supported"
-    exit_unsupported
-fi
-
 echo "Test histogram trace_marker tigger"
 
 echo 'hist:keys=common_pid' > events/ftrace/print/trigger
tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-snapshot.tc +1 -20
index df246e505af7..9fa48b0da940 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: trace_marker trigger - test snapshot trigger
+# requires: set_event snapshot events/ftrace/print/trigger
 # flags: instance
 
 fail() { #msg
@@ -8,26 +9,6 @@ fail() { #msg
     exit_fail
 }
 
-if [ ! -f set_event ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f snapshot ]; then
-    echo "snapshot is not supported"
-    exit_unsupported
-fi
-
-if [ ! -d events/ftrace/print ]; then
-    echo "event trace_marker is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/ftrace/print/trigger ]; then
-    echo "event trigger is not supported"
-    exit_unsupported
-fi
-
 test_trace() {
     file=$1
     x=$2
tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-synthetic-kernel.tc +1 -30
index 18b4d1c2807e..531139f41e94 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: trace_marker trigger - test histogram with synthetic event against kernel event
+# requires: set_event synthetic_events events/sched/sched_waking events/ftrace/print/trigger events/ftrace/print/hist
 # flags:
 
 fail() { #msg
@@ -8,36 +9,6 @@ fail() { #msg
     exit_fail
 }
 
-if [ ! -f set_event ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
-    echo "synthetic events not supported"
-    exit_unsupported
-fi
-
-if [ ! -d events/ftrace/print ]; then
-    echo "event trace_marker is not supported"
-    exit_unsupported
-fi
-
-if [ ! -d events/sched/sched_waking ]; then
-    echo "event sched_waking is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/ftrace/print/trigger ]; then
-    echo "event trigger is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/ftrace/print/hist ]; then
-    echo "hist trigger is not supported"
-    exit_unsupported
-fi
-
 echo "Test histogram kernel event to trace_marker latency histogram trigger"
 
 echo 'latency u64 lat' > synthetic_events
tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-synthetic.tc +1 -25
index dd262d6d0db6..cc99cbb06d5e 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: trace_marker trigger - test histogram with synthetic event
+# requires: set_event synthetic_events events/ftrace/print/trigger events/ftrace/print/hist
 # flags:
 
 fail() { #msg
@@ -8,31 +9,6 @@ fail() { #msg
     exit_fail
 }
 
-if [ ! -f set_event ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f synthetic_events ]; then
-    echo "synthetic events not supported"
-    exit_unsupported
-fi
-
-if [ ! -d events/ftrace/print ]; then
-    echo "event trace_marker is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/ftrace/print/trigger ]; then
-    echo "event trigger is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/ftrace/print/hist ]; then
-    echo "hist trigger is not supported"
-    exit_unsupported
-fi
-
 echo "Test histogram trace_marker to trace_marker latency histogram trigger"
 
 echo 'latency u64 lat' > synthetic_events
tools/testing/selftests/ftrace/test.d/trigger/trigger-traceonoff.tc +1 -10
index d5d2dcbc9cab..9ca04678f4da 100644
@@ -1,22 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test traceon/off trigger
+# requires: set_event events/sched/sched_process_fork/trigger
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-if [ ! -f set_event -o ! -d events/sched ]; then
-    echo "event tracing is not supported"
-    exit_unsupported
-fi
-
-if [ ! -f events/sched/sched_process_fork/trigger ]; then
-    echo "event trigger is not supported"
-    exit_unsupported
-fi
-
 echo "Test traceoff trigger"
 echo 1 > tracing_on
 echo 'traceoff' > events/sched/sched_process_fork/trigger
maintainer
#5 lore raw

Re: [PATCH v3 4/7] selftests/ftrace: Convert required interface checks into requires list

Quoted 7 lines · Masami Hiramatsu

Convert the required tracefs interface checking code with
requires: list.

---
Changes in v2: Fix trigger-onchange-action-hist.tc requires list.

Masami,

This patch doesn't apply to linux-kselftest next

Patches 1-3 applied fine and this one failed. For now I will hold off on applying this series.

thanks,
-- Shuah

author maintainer
#6 lore raw

Re: [PATCH v3 4/7] selftests/ftrace: Convert required interface checks into requires list

Hi Shuah,

Quoted 9 lines · On Tue, 9 Jun 2020 14:41:27 -0600 Shuah Khan <[email protected]> wrote:
Quoted 7 lines · Masami Hiramatsu

Convert the required tracefs interface checking code with
requires: list.

---
Changes in v2: Fix trigger-onchange-action-hist.tc requires list.

Quoted 6 lines

Masami,

This patch doesn't apply to linux-kselftest next

Patches 1-3 applied fine and this one failed. For now I will hold off on applying this series.

Yes, there is another patch posted by Tom with his ftrace enhancement in tracing-next. Thus I commented on 0/7 as below.

----
Since this series depends on following 2 commits,

commit 619ee76f5c9f ("selftests/ftrace: Return unsupported if no
error_log file") on Shuah's Kselftest tree
commit bea24f766efc ("selftests/ftrace: Distinguish between hist
and synthetic event checks") on Steven's Tracing tree

This can be applied on the tree which merged both of them.
----

I'm not sure how do I handle it. It is OK just modifying this for linux-kselftest, but in that case we will need another patch after merged both.

IMHO, since the kselftest must run correctly on older kernel, (and ftracetest does) Tom's kselftest patch should be merged into linux-kselftest instead of tracing tree.

Steve, what would you think?

Thank you,

Signature · 1 line
Masami Hiramatsu <[email protected]>
maintainer
#7 lore raw

Re: [PATCH v3 4/7] selftests/ftrace: Convert required interface checks into requires list

Quoted 16 lines · Masami Hiramatsu

Hi Shuah,

Quoted 11 lines · On Tue, 9 Jun 2020 14:41:27 -0600 Shuah Khan <[email protected]> wrote:
Quoted 7 lines · Masami Hiramatsu

Convert the required tracefs interface checking code with
requires: list.

---
Changes in v2: Fix trigger-onchange-action-hist.tc requires list.

Masami,

Quoted 8 lines
Quoted 4 lines

This patch doesn't apply to linux-kselftest next

Patches 1-3 applied fine and this one failed. For now I will hold off on applying this series.

Yes, there is another patch posted by Tom with his ftrace enhancement in tracing-next. Thus I commented on 0/7 as below.

Sorry I made a note of it when I first looked at the series and missed that when I was applying patches.

Quoted 15 lines

----
Since this series depends on following 2 commits,

commit 619ee76f5c9f ("selftests/ftrace: Return unsupported if no
error_log file") on Shuah's Kselftest tree
commit bea24f766efc ("selftests/ftrace: Distinguish between hist
and synthetic event checks") on Steven's Tracing tree

This can be applied on the tree which merged both of them.
----

I'm not sure how do I handle it. It is OK just modifying this for linux-kselftest, but in that case we will need another patch after merged both.

Quoted 6 lines

IMHO, since the kselftest must run correctly on older kernel, (and ftracetest does) Tom's kselftest patch should be merged into linux-kselftest instead of tracing tree.

Steve, what would you think?

No worries. As far as kselftest tree is concrned, I can apply these after rc1 comes out with Tom's patch.

Or I can give Ack and Steve can take these through tracing tree.

thanks,
-- Shuah

maintainer
#8 lore raw

Re: [PATCH v3 4/7] selftests/ftrace: Convert required interface checks into requires list

Quoted 7 lines · On Wed, 10 Jun 2020 06:04:33 -0600 Shuah Khan <[email protected]> wrote:
Quoted 2 lines

Steve, what would you think?

No worries. As far as kselftest tree is concrned, I can apply these after rc1 comes out with Tom's patch.

Or I can give Ack and Steve can take these through tracing tree.

All my patches have already made it to Linus's tree. Perhaps cherry-pick the commit needed from Linus's tree (it shouldn't break anything when Linus pulls it). Just let Linus know what you did, and everything should be fine.

-- Steve

maintainer
#9 lore raw

Re: [PATCH v3 4/7] selftests/ftrace: Convert required interface checks into requires list

Quoted 9 lines · Steven Rostedt
Quoted 6 lines · On Wed, 10 Jun 2020 06:04:33 -0600 Shuah Khan <[email protected]> wrote:
Quoted 2 lines

Steve, what would you think?

No worries. As far as kselftest tree is concrned, I can apply these after rc1 comes out with Tom's patch.

Quoted 7 lines
Quoted 1 line

Or I can give Ack and Steve can take these through tracing tree.

All my patches have already made it to Linus's tree. Perhaps cherry-pick the commit needed from Linus's tree (it shouldn't break anything when Linus pulls it). Just let Linus know what you did, and everything should be fine.

Good to know. I will get these in.

thanks,
-- Shuah

author maintainer
#10 lore raw

Re: [PATCH v3 4/7] selftests/ftrace: Convert required interface checks into requires list

Quoted 12 lines · On Thu, 11 Jun 2020 06:03:50 -0600 Shuah Khan <[email protected]> wrote:
Quoted 11 lines · Steven Rostedt
Quoted 7 lines · On Wed, 10 Jun 2020 06:04:33 -0600 Shuah Khan <[email protected]> wrote:
Quoted 2 lines

Steve, what would you think?

No worries. As far as kselftest tree is concrned, I can apply these after rc1 comes out with Tom's patch.

Or I can give Ack and Steve can take these through tracing tree.

Quoted 7 lines
Quoted 5 lines

All my patches have already made it to Linus's tree. Perhaps cherry-pick the commit needed from Linus's tree (it shouldn't break anything when Linus pulls it). Just let Linus know what you did, and everything should be fine.

Good to know. I will get these in.

Thanks Shuah and Steve!

Signature · 1 line
Masami Hiramatsu <[email protected]>
maintainer
#11 lore raw

Re: [PATCH v3 4/7] selftests/ftrace: Convert required interface checks into requires list

In reply to Shuah Khan
Quoted 11 lines · Shuah Khan
Quoted 10 lines · Steven Rostedt
Quoted 6 lines · On Wed, 10 Jun 2020 06:04:33 -0600 Shuah Khan <[email protected]> wrote:
Quoted 1 line

Steve, what would you think?

No worries. As far as kselftest tree is concrned, I can apply these after rc1 comes out with Tom's patch.

Or I can give Ack and Steve can take these through tracing tree.

Quoted 8 lines
Quoted 5 lines

All my patches have already made it to Linus's tree. Perhaps cherry-pick the commit needed from Linus's tree (it shouldn't break anything when Linus pulls it). Just let Linus know what you did, and everything should be fine.

Good to know. I will get these in.

I applied all 7 patches to linux-kselftest next for my second update. I saw a couple of merge problems with 4/7 patch even when I applied it on top of with Tom's patch.

I resolved them and amended the commit message to indicate the merge. It is straight forward. Please check for sanity.

thanks,
-- Shuah

author maintainer
#12 lore raw

Re: [PATCH v3 4/7] selftests/ftrace: Convert required interface checks into requires list

Hi Shuah,

Quoted 18 lines · On Tue, 16 Jun 2020 10:48:12 -0600 Shuah Khan <[email protected]> wrote:
Quoted 17 lines · Shuah Khan
Quoted 15 lines · Steven Rostedt
Quoted 6 lines · On Wed, 10 Jun 2020 06:04:33 -0600 Shuah Khan <[email protected]> wrote:
Quoted 1 line

Steve, what would you think?

No worries. As far as kselftest tree is concrned, I can apply these after rc1 comes out with Tom's patch.

Or I can give Ack and Steve can take these through tracing tree.

All my patches have already made it to Linus's tree. Perhaps cherry-pick the commit needed from Linus's tree (it shouldn't break anything when Linus pulls it). Just let Linus know what you did, and everything should be fine.

Quoted 6 lines
Quoted 2 lines

Good to know. I will get these in.

I applied all 7 patches to linux-kselftest next for my second update. I saw a couple of merge problems with 4/7 patch even when I applied it on top of with Tom's patch.

Oh, I might miss something.

Quoted 3 lines

I resolved them and amended the commit message to indicate the merge. It is straight forward. Please check for sanity.

Yes, I confirmed that the merge looks good, and also test ran out without any error. :)

Thank you!

Quoted 3 lines

thanks,
-- Shuah

Signature · 1 line
Masami Hiramatsu <[email protected]>
maintainer
#13 lore raw

Re: [PATCH v3 4/7] selftests/ftrace: Convert required interface checks into requires list

Quoted 30 lines · Masami Hiramatsu

Hi Shuah,

Quoted 18 lines · On Tue, 16 Jun 2020 10:48:12 -0600 Shuah Khan <[email protected]> wrote:
Quoted 17 lines · Shuah Khan
Quoted 15 lines · Steven Rostedt
Quoted 6 lines · On Wed, 10 Jun 2020 06:04:33 -0600 Shuah Khan <[email protected]> wrote:
Quoted 1 line

Steve, what would you think?

No worries. As far as kselftest tree is concrned, I can apply these after rc1 comes out with Tom's patch.

Or I can give Ack and Steve can take these through tracing tree.

All my patches have already made it to Linus's tree. Perhaps cherry-pick the commit needed from Linus's tree (it shouldn't break anything when Linus pulls it). Just let Linus know what you did, and everything should be fine.

Quoted 6 lines
Quoted 2 lines

Good to know. I will get these in.

I applied all 7 patches to linux-kselftest next for my second update. I saw a couple of merge problems with 4/7 patch even when I applied it on top of with Tom's patch.

Quoted 9 lines

Oh, I might miss something.

Quoted 3 lines

I resolved them and amended the commit message to indicate the merge. It is straight forward. Please check for sanity.

Yes, I confirmed that the merge looks good, and also test ran out without any error. :)

Thanks for confirming. Pull request going out today.

thanks,
-- Shuah

author maintainer
#14 lore raw

PATCH v3 5/7 selftests/ftrace: Convert check_filter_file() with requires list

In reply to Masami Hiramatsu

Since check_filter_file() is basically checking the filter tracefs file, we can convert it into requires list.

---
 .../ftrace/test.d/ftrace/fgraph-filter-stack.tc    |    4 +---
 .../ftrace/test.d/ftrace/fgraph-filter.tc          |    3 +--
 .../ftrace/test.d/ftrace/func-filter-glob.tc       |    3 +--
 .../test.d/ftrace/func-filter-notrace-pid.tc       |    4 +---
 .../ftrace/test.d/ftrace/func-filter-pid.tc        |    4 +---
 .../ftrace/test.d/ftrace/func-filter-stacktrace.tc |    3 +--
 .../ftrace/test.d/ftrace/func_event_triggers.tc    |    7 +++----
 .../ftrace/test.d/ftrace/func_mod_trace.tc         |    3 +--
 .../ftrace/test.d/ftrace/func_profiler.tc          |    4 +---
 .../ftrace/test.d/ftrace/func_set_ftrace_file.tc   |    6 +++---
 .../ftrace/test.d/ftrace/func_stack_tracer.tc      |    4 +---
 .../test.d/ftrace/func_traceonoff_triggers.tc      |    6 +++---
 tools/testing/selftests/ftrace/test.d/functions    |    7 -------
 .../ftrace/test.d/kprobe/kprobe_ftrace.tc          |    4 +---
 14 files changed, 19 insertions(+), 43 deletions(-)
tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc +1 -3
index 8dd22561d5b0..62af263fa75e 100644
@@ -1,7 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function graph filters with stack tracer
-# requires: stack_trace
+# requires: stack_trace set_ftrace_filter
 
 # Make sure that function graph filtering works, and is not
 # affected by other tracers enabled (like stack tracer)
@@ -11,8 +11,6 @@ if ! grep -q function_graph available_tracers; then
     exit_unsupported
 fi
 
-check_filter_file set_ftrace_filter
-
 do_reset() {
     if [ -e /proc/sys/kernel/stack_tracer_enabled ]; then
 	    echo 0 > /proc/sys/kernel/stack_tracer_enabled
tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc +1 -2
index d610f47edd90..56a86a2fc8ba 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function graph filters
+# requires: set_ftrace_filter
 
 # Make sure that function graph filtering works
 
@@ -9,8 +10,6 @@ if ! grep -q function_graph available_tracers; then
     exit_unsupported
 fi
 
-check_filter_file set_ftrace_filter
-
 fail() { # msg
     echo $1
     exit_fail
tools/testing/selftests/ftrace/test.d/ftrace/func-filter-glob.tc +1 -2
index 28936f434ee5..ac3e4d35f181 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function glob filters
+# requires: set_ftrace_filter
 
 # Make sure that function glob matching filter works.
 
@@ -9,8 +10,6 @@ if ! grep -q function available_tracers; then
     exit_unsupported
 fi
 
-check_filter_file set_ftrace_filter
-
 disable_tracing
 clear_trace
 
tools/testing/selftests/ftrace/test.d/ftrace/func-filter-notrace-pid.tc +1 -3
index 799cd1b9c42c..b7e18d30104a 100644
@@ -1,7 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function pid notrace filters
-# requires: set_ftrace_notrace_pid
+# requires: set_ftrace_notrace_pid set_ftrace_filter
 # flags: instance
 
 # Make sure that function pid matching filter with notrace works.
@@ -11,8 +11,6 @@ if ! grep -q function available_tracers; then
     exit_unsupported
 fi
 
-check_filter_file set_ftrace_filter
-
 do_function_fork=1
 
 if [ ! -f options/function-fork ]; then
tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc +1 -3
index 9497031913bb..53ec48a92f39 100644
@@ -1,7 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function pid filters
-# requires: set_ftrace_pid
+# requires: set_ftrace_pid set_ftrace_filter
 # flags: instance
 
 # Make sure that function pid matching filter works.
@@ -12,8 +12,6 @@ if ! grep -q function available_tracers; then
     exit_unsupported
 fi
 
-check_filter_file set_ftrace_filter
-
 do_function_fork=1
 
 if [ ! -f options/function-fork ]; then
tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc +1 -2
index b2aff786c1a2..0f41e441c203 100644
@@ -1,10 +1,9 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - stacktrace filter command
+# requires: set_ftrace_filter
 # flags: instance
 
-check_filter_file set_ftrace_filter
-
 echo _do_fork:stacktrace >> set_ftrace_filter
 
 grep -q "_do_fork:stacktrace:unlimited" set_ftrace_filter
tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc +3 -4
index e9b1fd534e96..3145b0f1835c 100644
@@ -3,15 +3,14 @@
 # description: ftrace - test for function event triggers
 # flags: instance
 #
+# The triggers are set within the set_ftrace_filter file
+# requires: set_ftrace_filter
+#
 # Ftrace allows to add triggers to functions, such as enabling or disabling
 # tracing, enabling or disabling trace events, or recording a stack trace
 # within the ring buffer.
 #
 # This test is designed to test event triggers
-#
-
-# The triggers are set within the set_ftrace_filter file
-check_filter_file set_ftrace_filter
 
 do_reset() {
     reset_ftrace_filter
tools/testing/selftests/ftrace/test.d/ftrace/func_mod_trace.tc +1 -2
index 1a4b4a442d33..37c8feb9078b 100644
@@ -1,8 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function trace on module
-
-check_filter_file set_ftrace_filter
+# requires: set_ftrace_filter
 
 : "mod: allows to filter a non exist function"
 echo 'non_exist_func:mod:non_exist_module' > set_ftrace_filter
tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc +1 -3
index 817d504f751c..8b487daaaf68 100644
@@ -1,7 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function profiler with function tracing
-# requires: function_profile_enabled
+# requires: function_profile_enabled set_ftrace_filter
 
 # There was a bug after a rewrite of the ftrace infrastructure that
 # caused the function_profiler not to be able to run with the function
@@ -19,8 +19,6 @@ if ! grep -q function_graph available_tracers; then
     exit_unsupported;
 fi
 
-check_filter_file set_ftrace_filter
-
 fail() { # mesg
     echo $1
     exit_fail
tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc +3 -3
index 70bad441fa7d..e96e279e0533 100644
@@ -2,6 +2,9 @@
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - test reading of set_ftrace_filter
 #
+# The triggers are set within the set_ftrace_filter file
+# requires: set_ftrace_filter
+#
 # The set_ftrace_filter file of ftrace is used to list functions as well as
 # triggers (probes) attached to functions. The code to read this file is not
 # straight forward and has had various bugs in the past. This test is designed
@@ -9,9 +12,6 @@
 # file in various ways (cat vs dd).
 #
 
-# The triggers are set within the set_ftrace_filter file
-check_filter_file set_ftrace_filter
-
 fail() { # mesg
     echo $1
     exit_fail
tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc +1 -3
index b3d78ef6c639..61264e422699 100644
@@ -1,11 +1,9 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - Max stack tracer
-# requires: stack_trace
+# requires: stack_trace stack_trace_filter
 # Test the basic function of max-stack usage tracing
 
-check_filter_file stack_trace_filter
-
 echo > stack_trace_filter
 echo 0 > stack_max_size
 echo 1 > /proc/sys/kernel/stack_tracer_enabled
tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc +3 -3
index 3ed173f2944a..aee22289536b 100644
@@ -3,6 +3,9 @@
 # description: ftrace - test for function traceon/off triggers
 # flags: instance
 #
+# The triggers are set within the set_ftrace_filter file
+# requires: set_ftrace_filter
+#
 # Ftrace allows to add triggers to functions, such as enabling or disabling
 # tracing, enabling or disabling trace events, or recording a stack trace
 # within the ring buffer.
@@ -10,9 +13,6 @@
 # This test is designed to test enabling and disabling tracing triggers
 #
 
-# The triggers are set within the set_ftrace_filter file
-check_filter_file set_ftrace_filter
-
 fail() { # mesg
     echo $1
     exit_fail
tools/testing/selftests/ftrace/test.d/functions +0 -7
index 5100eb1ada0f..cd2756c77ed9 100644
@@ -1,10 +1,3 @@
-check_filter_file() { # check filter file introduced by dynamic ftrace
-    if [ ! -f "$1" ]; then
-        echo "$1 not found? Is dynamic ftrace not set?"
-        exit_unsupported
-    fi
-}
-
 clear_trace() { # reset trace output
     echo > trace
 }
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc +1 -3
index b7f8536438bd..9a983df5ae17 100644
@@ -1,12 +1,10 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobe dynamic event with function tracer
-# requires: kprobe_events
+# requires: kprobe_events stack_trace_filter
 
 grep "function" available_tracers || exit_unsupported # this is configurable
 
-check_filter_file set_ftrace_filter
-
 # prepare
 echo nop > current_tracer
 echo _do_fork > set_ftrace_filter
author maintainer
#15 lore raw

PATCH v3 6/7 selftests/ftrace: Support ":tracer" suffix for requires

In reply to Masami Hiramatsu

Add ":tracer" suffix support for the requires list, so that the testcase can list up the required tracer (e.g. function) to the requires list.

For example, if the testcase requires function_graph tracer, it can write requires list as below instead of checking available_tracers.

# requires: function_graph:tracer

---
Changes in v3:
- Update template according to the previous change in the series.

---
 .../ftrace/test.d/ftrace/fgraph-filter-stack.tc    |    7 +------
 .../ftrace/test.d/ftrace/fgraph-filter.tc          |    7 +------
 .../ftrace/test.d/ftrace/func-filter-glob.tc       |    7 +------
 .../test.d/ftrace/func-filter-notrace-pid.tc       |    7 +------
 .../ftrace/test.d/ftrace/func-filter-pid.tc        |    7 +------
 .../selftests/ftrace/test.d/ftrace/func_cpumask.tc |    6 +-----
 .../ftrace/test.d/ftrace/func_profiler.tc          |    6 +-----
 tools/testing/selftests/ftrace/test.d/functions    |   10 ++++++++--
 .../ftrace/test.d/kprobe/kprobe_ftrace.tc          |    4 +---
 .../ftrace/test.d/preemptirq/irqsoff_tracer.tc     |    4 +---
 tools/testing/selftests/ftrace/test.d/template     |    3 ++-
 .../selftests/ftrace/test.d/tracer/wakeup.tc       |    6 +-----
 .../selftests/ftrace/test.d/tracer/wakeup_rt.tc    |    6 +-----
 13 files changed, 21 insertions(+), 59 deletions(-)
tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc +1 -6
index 62af263fa75e..cf3ea42b12b0 100644
@@ -1,16 +1,11 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function graph filters with stack tracer
-# requires: stack_trace set_ftrace_filter
+# requires: stack_trace set_ftrace_filter function_graph:tracer
 
 # Make sure that function graph filtering works, and is not
 # affected by other tracers enabled (like stack tracer)
 
-if ! grep -q function_graph available_tracers; then
-    echo "no function graph tracer configured"
-    exit_unsupported
-fi
-
 do_reset() {
     if [ -e /proc/sys/kernel/stack_tracer_enabled ]; then
 	    echo 0 > /proc/sys/kernel/stack_tracer_enabled
tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc +1 -6
index 56a86a2fc8ba..b3ccdaec2a61 100644
@@ -1,15 +1,10 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function graph filters
-# requires: set_ftrace_filter
+# requires: set_ftrace_filter function_graph:tracer
 
 # Make sure that function graph filtering works
 
-if ! grep -q function_graph available_tracers; then
-    echo "no function graph tracer configured"
-    exit_unsupported
-fi
-
 fail() { # msg
     echo $1
     exit_fail
tools/testing/selftests/ftrace/test.d/ftrace/func-filter-glob.tc +1 -6
index ac3e4d35f181..4b994b6df5ac 100644
@@ -1,15 +1,10 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function glob filters
-# requires: set_ftrace_filter
+# requires: set_ftrace_filter function:tracer
 
 # Make sure that function glob matching filter works.
 
-if ! grep -q function available_tracers; then
-    echo "no function tracer configured"
-    exit_unsupported
-fi
-
 disable_tracing
 clear_trace
 
tools/testing/selftests/ftrace/test.d/ftrace/func-filter-notrace-pid.tc +1 -6
index b7e18d30104a..acb17ce543d2 100644
@@ -1,16 +1,11 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function pid notrace filters
-# requires: set_ftrace_notrace_pid set_ftrace_filter
+# requires: set_ftrace_notrace_pid set_ftrace_filter function:tracer
 # flags: instance
 
 # Make sure that function pid matching filter with notrace works.
 
-if ! grep -q function available_tracers; then
-    echo "no function tracer configured"
-    exit_unsupported
-fi
-
 do_function_fork=1
 
 if [ ! -f options/function-fork ]; then
tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc +1 -6
index 53ec48a92f39..9f0a9687c773 100644
@@ -1,17 +1,12 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function pid filters
-# requires: set_ftrace_pid set_ftrace_filter
+# requires: set_ftrace_pid set_ftrace_filter function:tracer
 # flags: instance
 
 # Make sure that function pid matching filter works.
 # Also test it on an instance directory
 
-if ! grep -q function available_tracers; then
-    echo "no function tracer configured"
-    exit_unsupported
-fi
-
 do_function_fork=1
 
 if [ ! -f options/function-fork ]; then
tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc +1 -5
index 71fa3f49e35e..0c6cf7725110 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function trace with cpumask
+# requires: function:tracer
 
 if ! which nproc ; then
   nproc() {
@@ -15,11 +16,6 @@ if [ $NP -eq 1 ] ;then
   exit_unresolved
 fi
 
-if ! grep -q "function" available_tracers ; then
-  echo "Function trace is not enabled"
-  exit_unsupported
-fi
-
 ORIG_CPUMASK=`cat tracing_cpumask`
 
 do_reset() {
tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc +1 -5
index 8b487daaaf68..1dbd766c0cd2 100644
@@ -1,7 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: ftrace - function profiler with function tracing
-# requires: function_profile_enabled set_ftrace_filter
+# requires: function_profile_enabled set_ftrace_filter function_graph:tracer
 
 # There was a bug after a rewrite of the ftrace infrastructure that
 # caused the function_profiler not to be able to run with the function
@@ -14,10 +14,6 @@
 # This test triggers those bugs on those kernels.
 #
 # We need function_graph and profiling to to run this test
-if ! grep -q function_graph available_tracers; then
-    echo "no function graph tracer configured"
-    exit_unsupported;
-fi
 
 fail() { # mesg
     echo $1
tools/testing/selftests/ftrace/test.d/functions +8 -2
index cd2756c77ed9..35de6bc9613b 100644
@@ -106,9 +106,15 @@ initialize_ftrace() { # Reset ftrace to initial-state
     enable_tracing
 }
 
-check_requires() { # Check required files
+check_requires() { # Check required files and tracers
     for i in $* ; do
-        if [ ! -e $i ]; then
+        t=${i%:tracer}
+        if [ $t != $i ]; then
+            if ! grep -wq $t available_tracers ; then
+                echo "Required tracer $t is not configured."
+                exit_unsupported
+            fi
+        elif [ ! -e $i ]; then
             echo "Required feature interface $i doesn't exist."
             exit_unsupported
         fi
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc +1 -3
index 9a983df5ae17..81d8b58c03bc 100644
@@ -1,9 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobe dynamic event with function tracer
-# requires: kprobe_events stack_trace_filter
-
-grep "function" available_tracers || exit_unsupported # this is configurable
+# requires: kprobe_events stack_trace_filter function:tracer
 
 # prepare
 echo nop > current_tracer
tools/testing/selftests/ftrace/test.d/preemptirq/irqsoff_tracer.tc +1 -3
index 2b82c80edf69..22bff122b933 100644
@@ -1,6 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: test for the preemptirqsoff tracer
+# requires: preemptoff:tracer irqsoff:tracer
 
 MOD=preemptirq_delay_test
 
@@ -27,9 +28,6 @@ unres() { #msg
 modprobe $MOD || unres "$MOD module not available"
 rmmod $MOD
 
-grep -q "preemptoff" available_tracers || unsup "preemptoff tracer not enabled"
-grep -q "irqsoff" available_tracers || unsup "irqsoff tracer not enabled"
-
 reset_tracer
 
 # Simulate preemptoff section for half a second couple of times
tools/testing/selftests/ftrace/test.d/template +2 -1
index 611423c4e75f..b1c2f1920897 100644
@@ -1,7 +1,8 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: %HERE DESCRIBE WHAT THIS DOES%
-# requires: %HERE LIST THE REQUIRED FILES%
+# requires: %HERE LIST THE REQUIRED FILES OR TRACERS%
+# The required tracer needs :tracer suffix, e.g. function:tracer
 # you have to add ".tc" extention for your testcase file
 # Note that all tests are run with "errexit" option.
 
tools/testing/selftests/ftrace/test.d/tracer/wakeup.tc +1 -5
index b0893d7edda3..11be10e1bf96 100644
@@ -1,17 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Test wakeup tracer
+# requires: wakeup:tracer
 
 if ! which chrt ; then
   echo "chrt is not found. This test requires nice command."
   exit_unresolved
 fi
 
-if ! grep -wq "wakeup" available_tracers ; then
-  echo "wakeup tracer is not supported"
-  exit_unsupported
-fi
-
 echo wakeup > current_tracer
 echo 1 > tracing_on
 echo 0 > tracing_max_latency
tools/testing/selftests/ftrace/test.d/tracer/wakeup_rt.tc +1 -5
index b9b6669a623b..3a77198b3c69 100644
@@ -1,17 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Test wakeup RT tracer
+# requires: wakeup_rt:tracer
 
 if ! which chrt ; then
   echo "chrt is not found. This test requires chrt command."
   exit_unresolved
 fi
 
-if ! grep -wq "wakeup_rt" available_tracers ; then
-  echo "wakeup_rt tracer is not supported"
-  exit_unsupported
-fi
-
 echo wakeup_rt > current_tracer
 echo 1 > tracing_on
 echo 0 > tracing_max_latency
author maintainer
#16 lore raw

PATCH v3 7/7 selftests/ftrace: Support ":README" suffix for requires

In reply to Masami Hiramatsu

Add ":README" suffix support for the requires list, so that the testcase can list up the required string for README file to the requires list.

Note that the required string is treated as a fixed string, instead of regular expression. Also, the testcase can specify a string containing spaces with quotes. E.g.

# requires: "place: [<module>:]<symbol>":README

---
Changes in v3:
- Update template according to the previous change in the series.
Changes in v2:
- Convert README check in kprobe/kprobe_args_user.tc

---
 tools/testing/selftests/ftrace/ftracetest          |    3 ++-
 .../ftrace/test.d/dynevent/add_remove_kprobe.tc    |    5 +----
 .../ftrace/test.d/dynevent/add_remove_synth.tc     |    4 +---
 .../ftrace/test.d/dynevent/clear_select_events.tc  |    7 +------
 .../ftrace/test.d/dynevent/generic_clear_event.tc  |    7 +------
 tools/testing/selftests/ftrace/test.d/functions    |    8 +++++++-
 .../ftrace/test.d/kprobe/kprobe_args_syntax.tc     |    4 +---
 .../ftrace/test.d/kprobe/kprobe_args_type.tc       |    4 +---
 .../ftrace/test.d/kprobe/kprobe_args_user.tc       |    3 +--
 .../ftrace/test.d/kprobe/kprobe_multiprobe.tc      |    4 +---
 .../ftrace/test.d/kprobe/kretprobe_maxactive.tc    |    4 +---
 tools/testing/selftests/ftrace/test.d/template     |    4 +++-
 .../inter-event/trigger-action-hist-xfail.tc       |    4 +---
 .../inter-event/trigger-onchange-action-hist.tc    |    4 +---
 .../inter-event/trigger-snapshot-action-hist.tc    |    6 +-----
 .../inter-event/trigger-trace-action-hist.tc       |    4 +---
 16 files changed, 25 insertions(+), 50 deletions(-)
tools/testing/selftests/ftrace/ftracetest +2 -1
index cdf7940b6610..8ec1922e974e 100755
@@ -269,7 +269,8 @@ testcase() { # testfile
 
 checkreq() { # testfile
   requires=`grep "^#[ \t]*requires:" $1 | cut -f2- -d:`
-  check_requires $requires
+  # Use eval to pass quoted-patterns correctly.
+  eval check_requires "$requires"
 }
 
 test_on_instance() { # testfile
tools/testing/selftests/ftrace/test.d/dynevent/add_remove_kprobe.tc +1 -4
index 1a8c56b197a8..68550f97d3c3 100644
@@ -1,10 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Generic dynamic event - add/remove kprobe events
-# requires: dynamic_events
-
-grep -q "place: \[<module>:\]<symbol>" README || exit_unsupported
-grep -q "place (kretprobe): \[<module>:\]<symbol>" README || exit_unsupported
+# requires: dynamic_events "place: [<module>:]<symbol>":README "place (kretprobe): [<module>:]<symbol>":README
 
 echo 0 > events/enable
 echo > dynamic_events
tools/testing/selftests/ftrace/test.d/dynevent/add_remove_synth.tc +1 -3
index f5018b3afb39..2b94611e1a28 100644
@@ -1,9 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Generic dynamic event - add/remove synthetic events
-# requires: dynamic_events
-
-grep -q "s:\[synthetic/\]" README || exit_unsupported
+# requires: dynamic_events "s:[synthetic/]":README
 
 echo 0 > events/enable
 echo > dynamic_events
tools/testing/selftests/ftrace/test.d/dynevent/clear_select_events.tc +1 -6
index e2484445ddec..c969be9eb7de 100644
@@ -1,12 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Generic dynamic event - selective clear (compatibility)
-# requires: dynamic_events kprobe_events synthetic_events
-
-grep -q "place: \[<module>:\]<symbol>" README || exit_unsupported
-grep -q "place (kretprobe): \[<module>:\]<symbol>" README || exit_unsupported
-
-grep -q "s:\[synthetic/\]" README || exit_unsupported
+# requires: dynamic_events kprobe_events synthetic_events "place: [<module>:]<symbol>":README "place (kretprobe): [<module>:]<symbol>":README "s:[synthetic/]":README
 
 echo 0 > events/enable
 echo > dynamic_events
tools/testing/selftests/ftrace/test.d/dynevent/generic_clear_event.tc +1 -6
index e56cb60b4e56..16d543eaac88 100644
@@ -1,12 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Generic dynamic event - generic clear event
-# requires: dynamic_events
-
-grep -q "place: \[<module>:\]<symbol>" README || exit_unsupported
-grep -q "place (kretprobe): \[<module>:\]<symbol>" README || exit_unsupported
-
-grep -q "s:\[synthetic/\]" README || exit_unsupported
+# requires: dynamic_events "place: [<module>:]<symbol>":README "place (kretprobe): [<module>:]<symbol>":README "s:[synthetic/]":README
 
 echo 0 > events/enable
 echo > dynamic_events
tools/testing/selftests/ftrace/test.d/functions +7 -1
index 35de6bc9613b..c5dec55b7d95 100644
@@ -107,13 +107,19 @@ initialize_ftrace() { # Reset ftrace to initial-state
 }
 
 check_requires() { # Check required files and tracers
-    for i in $* ; do
+    for i in "$@" ; do
+        r=${i%:README}
         t=${i%:tracer}
         if [ $t != $i ]; then
             if ! grep -wq $t available_tracers ; then
                 echo "Required tracer $t is not configured."
                 exit_unsupported
             fi
+        elif [ $r != $i ]; then
+            if ! grep -Fq "$r" README ; then
+                echo "Required feature pattern \"$r\" is not in README."
+                exit_unsupported
+            fi
         elif [ ! -e $i ]; then
             echo "Required feature interface $i doesn't exist."
             exit_unsupported
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc +1 -3
index f06c1477f00f..474ca1a9a088 100644
@@ -1,9 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobe event argument syntax
-# requires: kprobe_events
-
-grep "x8/16/32/64" README > /dev/null || exit_unsupported # version issue
+# requires: kprobe_events "x8/16/32/64":README
 
 PROBEFUNC="vfs_read"
 GOODREG=
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc +1 -3
index d599d6f544d4..0610e0b5587c 100644
@@ -1,9 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobes event arguments with types
-# requires: kprobe_events
-
-grep "x8/16/32/64" README > /dev/null || exit_unsupported # version issue
+# requires: kprobe_events "x8/16/32/64":README
 
 gen_event() { # Bitsize
   echo "p:testprobe _do_fork \$stack0:s$1 \$stack0:u$1 \$stack0:x$1 \$stack0:b4@4/$1"
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_user.tc +1 -2
index a9b3a788183f..a30a9c07290d 100644
@@ -1,9 +1,8 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kprobe event user-memory access
-# requires: kprobe_events
+# requires: kprobe_events '$arg<N>':README
 
-grep -q '\$arg<N>' README || exit_unsupported # depends on arch
 grep -A10 "fetcharg:" README | grep -q 'ustring' || exit_unsupported
 grep -A10 "fetcharg:" README | grep -q '\[u\]<offset>' || exit_unsupported
 
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_multiprobe.tc +1 -3
index 8205d588bed4..366b7e1b6718 100644
@@ -1,9 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Create/delete multiprobe on kprobe event
-# requires: kprobe_events
-
-grep -q "Create/append/" README || exit_unsupported
+# requires: kprobe_events "Create/append/":README
 
 # Choose 2 symbols for target
 SYM1=_do_fork
tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_maxactive.tc +1 -3
index 0f96a45010d1..4f0b268c1233 100644
@@ -1,9 +1,7 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: Kretprobe dynamic event with maxactive
-# requires: kprobe_events
-
-grep -q 'r\[maxactive\]' README || exit_unsupported # this is older version
+# requires: kprobe_events 'r[maxactive]':README
 
 # Test if we successfully reject unknown messages
 if echo 'a:myprobeaccept inet_csk_accept' > kprobe_events; then false; else true; fi
tools/testing/selftests/ftrace/test.d/template +3 -1
index b1c2f1920897..2cd8947edf72 100644
@@ -1,8 +1,10 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: %HERE DESCRIBE WHAT THIS DOES%
-# requires: %HERE LIST THE REQUIRED FILES OR TRACERS%
+# requires: %HERE LIST THE REQUIRED FILES, TRACERS OR README-STRINGS%
 # The required tracer needs :tracer suffix, e.g. function:tracer
+# The required README string needs :README suffix, e.g. "x8/16/32/64":README
+# and the README string is treated as a fixed-string instead of regexp pattern.
 # you have to add ".tc" extention for your testcase file
 # Note that all tests are run with "errexit" option.
 
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-action-hist-xfail.tc +1 -3
index 07093bbd9816..1590d6bfb857 100644
@@ -1,15 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test inter-event histogram trigger expected fail actions
-# requires: set_event snapshot
+# requires: set_event snapshot "snapshot()":README
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-grep -q "snapshot()" README || exit_unsupported # version issue
-
 echo "Test expected snapshot action failure"
 
 echo 'hist:keys=comm:onmatch(sched.sched_wakeup).snapshot()' >> events/sched/sched_waking/trigger && exit_fail
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onchange-action-hist.tc +1 -3
index 2366a8f8f8f2..adaabb873ed4 100644
@@ -1,15 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test inter-event histogram trigger onchange action
-# requires: set_event
+# requires: set_event "onchange(var)":README
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-grep -q "onchange(var)" README || exit_unsupported # version issue
-
 echo "Test onchange action"
 
 echo 'hist:keys=comm:newprio=prio:onchange($newprio).save(comm,prio) if comm=="ping"' >> events/sched/sched_waking/trigger
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-snapshot-action-hist.tc +1 -5
index 2902a897255f..67fa328b830f 100644
@@ -1,17 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test inter-event histogram trigger snapshot action
-# requires: set_event snapshot events/sched/sched_process_fork/hist
+# requires: set_event snapshot events/sched/sched_process_fork/hist "onchange(var)":README "snapshot()":README
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-grep -q "onchange(var)" README || exit_unsupported # version issue
-
-grep -q "snapshot()" README || exit_unsupported # version issue
-
 echo "Test snapshot action"
 
 echo 1 > events/sched/enable
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-trace-action-hist.tc +1 -3
index e2ef5268b7e9..c126d2350a6d 100644
@@ -1,15 +1,13 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test inter-event histogram trigger trace action
-# requires: set_event synthetic_events events/sched/sched_process_fork/hist
+# requires: set_event synthetic_events events/sched/sched_process_fork/hist "trace(<synthetic_event>":README
 
 fail() { #msg
     echo $1
     exit_fail
 }
 
-grep -q "trace(<synthetic_event>" README || exit_unsupported # version issue
-
 echo "Test create synthetic event"
 
 echo 'wakeup_latency  u64 lat pid_t pid char comm[16]' > synthetic_events