Add frequency / voltage scaling support for IPQ6018 SoC
Subsystems (4)
v2 cover Add frequency / voltage scaling support for IPQ6018 SoC
IPQ6018 SoC uses the PMIC MP5496. SMPA2 and LDOA2 regulator of MP5496 controls the APSS and SDCC voltage scaling respectively. Add support for the same.
changes since V1:
- Moved YAML conversion to the last as per Mark's comments
Kathiravan T (6):
dt-bindings: soc: qcom: Add IPQ6018 compatible
soc: qcom: smd-rpm: Add IPQ6018 compatible
dt-bindings: regulator: add MP5496 regulator compatible
regulator: qcom_smd: Add MP5496 regulators
dt-bindings: soc: qcom: convert the SMD-RPM document to YAML schema
dt-bindings: regulator: convert QCOM SMD-RPM regulator document to
YAML schema
.../bindings/regulator/qcom,smd-rpm-regulator.txt | 320 --------------------- .../bindings/regulator/qcom,smd-rpm-regulator.yaml | 106 +++++++ .../devicetree/bindings/soc/qcom/qcom,smd-rpm.txt | 62 ---- .../devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml | 92 ++++++ drivers/regulator/qcom_smd-regulator.c | 34 +++ drivers/soc/qcom/smd-rpm.c | 1 + 6 files changed, 233 insertions(+), 382 deletions(-) delete mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
Signature · 1 line
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
PATCH v2 1/6 dt-bindings: soc: qcom: Add IPQ6018 compatible
This patch adds the dt-binding for the rpm on the Qualcomm IPQ6018 platform.
--- Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt +1 -0
@@ -20,6 +20,7 @@ resources. Value type: <string> Definition: must be one of: "qcom,rpm-apq8084" + "qcom,rpm-ipq6018" "qcom,rpm-msm8916" "qcom,rpm-msm8974" "qcom,rpm-msm8976"
Signature · 1 line
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
PATCH v2 2/6 soc: qcom: smd-rpm: Add IPQ6018 compatible
In reply to Kathiravan TThis patch adds a compatible for the rpm on the Qualcomm IPQ6018 platform.
--- drivers/soc/qcom/smd-rpm.c | 1 + 1 file changed, 1 insertion(+)
drivers/soc/qcom/smd-rpm.c +1 -0
@@ -230,6 +230,7 @@ static void qcom_smd_rpm_remove(struct rpmsg_device *rpdev)static const struct of_device_id qcom_smd_rpm_of_match[] = { { .compatible ="qcom,rpm-apq8084" }, + { .compatible ="qcom,rpm-ipq6018" }, { .compatible ="qcom,rpm-msm8916" }, { .compatible ="qcom,rpm-msm8974" }, { .compatible ="qcom,rpm-msm8976" },
Signature · 1 line
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
PATCH v2 3/6 dt-bindings: regulator: add MP5496 regulator compatible
In reply to Kathiravan TIPQ6018 uses the PMIC MP5496. Add the binding for the same.
--- Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt +1 -0
@@ -19,6 +19,7 @@ Regulator nodes are identified by their compatible: Usage: required Value type: <string> Definition: must be one of: + "qcom,rpm-mp5496-regulators" "qcom,rpm-pm8841-regulators" "qcom,rpm-pm8916-regulators" "qcom,rpm-pm8941-regulators"
Signature · 1 line
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
PATCH v2 4/6 regulator: qcom_smd: Add MP5496 regulators
In reply to Kathiravan TIPQ6018 SoC uses the PMIC MP5496. SMPA2 and LDOA2 regulator controls the APSS and SDCC voltage scaling respectively. Add support for the same.
--- drivers/regulator/qcom_smd-regulator.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)
drivers/regulator/qcom_smd-regulator.c +34 -0
@@ -198,6 +198,15 @@ static const struct regulator_ops rpm_bob_ops = { .set_voltage = rpm_reg_set_voltage, }; +static const struct regulator_ops rpm_mp5496_ops = { + .enable = rpm_reg_enable, + .disable = rpm_reg_disable, + .is_enabled = rpm_reg_is_enabled, + .list_voltage = regulator_list_voltage_linear_range, + + .set_voltage = rpm_reg_set_voltage, +}; +static const struct regulator_desc pma8084_hfsmps = { .linear_ranges = (struct linear_range []) {REGULATOR_LINEAR_RANGE (375000 ,0 ,95 ,12500 ),
@@ -595,6 +604,24 @@ static const struct regulator_desc pms405_pldo600 = { .ops = &rpm_smps_ldo_ops, }; +static const struct regulator_desc mp5496_smpa2 = { + .linear_ranges = (struct linear_range []) { +REGULATOR_LINEAR_RANGE (725000 ,0 ,27 ,12500 ), + }, + .n_linear_ranges =1 , + .n_voltages =28 , + .ops = &rpm_mp5496_ops, +}; + +static const struct regulator_desc mp5496_ldoa2 = { + .linear_ranges = (struct linear_range []) { +REGULATOR_LINEAR_RANGE (1800000 ,0 ,60 ,25000 ), + }, + .n_linear_ranges =1 , + .n_voltages =61 , + .ops = &rpm_mp5496_ops, +}; +struct rpm_regulator_data {const char *name;u32 type;
@@ -603,6 +630,12 @@ struct rpm_regulator_data {const char *supply; }; +static const struct rpm_regulator_data rpm_mp5496_regulators[] = { + {"s2" ,QCOM_SMD_RPM_SMPA ,2 , &mp5496_smpa2,"s2" }, + {"l2" ,QCOM_SMD_RPM_LDOA ,2 , &mp5496_ldoa2,"l2" }, + {} +}; +static const struct rpm_regulator_data rpm_pm8841_regulators[] = { {"s1" ,QCOM_SMD_RPM_SMPB ,1 , &pm8x41_hfsmps,"vdd_s1" }, {"s2" ,QCOM_SMD_RPM_SMPB ,2 , &pm8841_ftsmps,"vdd_s2" },
@@ -901,6 +934,7 @@ static const struct rpm_regulator_data rpm_pms405_regulators[] = { };static const struct of_device_id rpm_of_match[] = { + { .compatible ="qcom,rpm-mp5496-regulators" , .data = &rpm_mp5496_regulators }, { .compatible ="qcom,rpm-pm8841-regulators" , .data = &rpm_pm8841_regulators }, { .compatible ="qcom,rpm-pm8916-regulators" , .data = &rpm_pm8916_regulators }, { .compatible ="qcom,rpm-pm8941-regulators" , .data = &rpm_pm8941_regulators },
Signature · 1 line
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
PATCH v2 5/6 dt-bindings: soc: qcom: convert the SMD-RPM document to YAML schema
In reply to Kathiravan TConvert the qcom,smd-rpm.txt document to YAML schema
--- .../devicetree/bindings/soc/qcom/qcom,smd-rpm.txt | 63 --------------- .../devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml | 92 ++++++++++++++++++++++ 2 files changed, 92 insertions(+), 63 deletions(-) delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt deleted +0 -63
@@ -1,63 +0,0 @@ -Qualcomm Resource Power Manager (RPM) over SMD - -This driver is used to interface with the Resource Power Manager (RPM) found in -various Qualcomm platforms. The RPM allows each component in the system to vote -for state of the system resources, such as clocks, regulators and bus -frequencies. - -The SMD information for the RPM edge should be filled out. See qcom,smd.txt for -the required edge properties. All SMD related properties will reside within the -RPM node itself. - -= SUBDEVICES - -The RPM exposes resources to its subnodes. The rpm_requests node must be -present and this subnode may contain children that designate regulator -resources. - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,rpm-apq8084" - "qcom,rpm-ipq6018" - "qcom,rpm-msm8916" - "qcom,rpm-msm8974" - "qcom,rpm-msm8976" - "qcom,rpm-msm8998" - "qcom,rpm-sdm660" - "qcom,rpm-qcs404" - -- qcom,smd-channels: - Usage: required - Value type: <string> - Definition: must be "rpm_requests" - -Refer to Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt -for information on the regulator subnodes that can exist under the rpm_requests. - -Example: - - soc { - apcs: syscon@f9011000 { - compatible = "syscon"; - reg = <0xf9011000 0x1000>; - }; - }; - - smd { - compatible = "qcom,smd"; - - rpm { - interrupts = <0 168 1>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; - - rpm_requests { - compatible = "qcom,rpm-msm8974"; - qcom,smd-channels = "rpm_requests"; - - ... - }; - }; - };
Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml new file +92 -0
92 lines not on this page · raw message
Signature · 1 line
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Re: [PATCH V2 5/6] dt-bindings: soc: qcom: convert the SMD-RPM document to YAML schema
Quoted 10 lines · Kathiravan T
Convert the qcom,smd-rpm.txt document to YAML schema
Signed-off-by Kathiravan T <[email protected]>--- .../devicetree/bindings/soc/qcom/qcom,smd-rpm.txt | 63 --------------- .../devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml | 92 ++++++++++++++++++++++ 2 files changed, 92 insertions(+), 63 deletions(-) delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
PATCH v2 6/6 dt-bindings: regulator: convert QCOM SMD-RPM regulator document to YAML schema
In reply to Kathiravan TConvert qcom,smd-rpm-regulator.txt document to YAML schema
--- .../bindings/regulator/qcom,smd-rpm-regulator.txt | 321 --------------------- .../bindings/regulator/qcom,smd-rpm-regulator.yaml | 106 +++++++ 2 files changed, 106 insertions(+), 321 deletions(-) delete mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt deleted +0 -321
@@ -1,321 +0,0 @@ -QCOM SMD RPM REGULATOR - -The Qualcomm RPM over SMD regulator is modelled as a subdevice of the RPM. -Because SMD is used as the communication transport mechanism, the RPM resides as -a subnode of the SMD. As such, the SMD-RPM regulator requires that the SMD and -RPM nodes be present. - -Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt for -information pertaining to the SMD node. - -Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt for -information regarding the RPM node. - -== Regulator - -Regulator nodes are identified by their compatible: - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,rpm-mp5496-regulators" - "qcom,rpm-pm8841-regulators" - "qcom,rpm-pm8916-regulators" - "qcom,rpm-pm8941-regulators" - "qcom,rpm-pm8950-regulators" - "qcom,rpm-pm8994-regulators" - "qcom,rpm-pm8998-regulators" - "qcom,rpm-pma8084-regulators" - "qcom,rpm-pmi8994-regulators" - "qcom,rpm-pmi8998-regulators" - "qcom,rpm-pms405-regulators" - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_s6-supply: -- vdd_s7-supply: -- vdd_s8-supply: - Usage: optional (pm8841 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_l1_l2_l3-supply: -- vdd_l4_l5_l6-supply: -- vdd_l7-supply: -- vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18-supply: - Usage: optional (pm8916 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_s6-supply: -- vdd_l1_l19-supply: -- vdd_l2_l23-supply: -- vdd_l3-supply: -- vdd_l4_l5_l6_l7_l16-supply: -- vdd_l8_l11_l12_l17_l22-supply: -- vdd_l9_l10_l13_l14_l15_l18-supply: -- vdd_l20-supply: -- vdd_l21-supply: - Usage: optional (pm8950 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_l1_l3-supply: -- vdd_l2_lvs1_2_3-supply: -- vdd_l4_l11-supply: -- vdd_l5_l7-supply: -- vdd_l6_l12_l14_l15-supply: -- vdd_l8_l16_l18_l19-supply: -- vdd_l9_l10_l17_l22-supply: -- vdd_l13_l20_l23_l24-supply: -- vdd_l21-supply: -- vin_5vs-supply: - Usage: optional (pm8941 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_s6-supply: -- vdd_s7-supply: -- vdd_s8-supply: -- vdd_s9-supply: -- vdd_s10-supply: -- vdd_s11-supply: -- vdd_s12-supply: -- vdd_l1-supply: -- vdd_l2_l26_l28-supply: -- vdd_l3_l11-supply: -- vdd_l4_l27_l31-supply: -- vdd_l5_l7-supply: -- vdd_l6_l12_l32-supply: -- vdd_l5_l7-supply: -- vdd_l8_l16_l30-supply: -- vdd_l9_l10_l18_l22-supply: -- vdd_l9_l10_l18_l22-supply: -- vdd_l3_l11-supply: -- vdd_l6_l12_l32-supply: -- vdd_l13_l19_l23_l24-supply: -- vdd_l14_l15-supply: -- vdd_l14_l15-supply: -- vdd_l8_l16_l30-supply: -- vdd_l17_l29-supply: -- vdd_l9_l10_l18_l22-supply: -- vdd_l13_l19_l23_l24-supply: -- vdd_l20_l21-supply: -- vdd_l20_l21-supply: -- vdd_l9_l10_l18_l22-supply: -- vdd_l13_l19_l23_l24-supply: -- vdd_l13_l19_l23_l24-supply: -- vdd_l25-supply: -- vdd_l2_l26_l28-supply: -- vdd_l4_l27_l31-supply: -- vdd_l2_l26_l28-supply: -- vdd_l17_l29-supply: -- vdd_l8_l16_l30-supply: -- vdd_l4_l27_l31-supply: -- vdd_l6_l12_l32-supply: -- vdd_lvs1_2-supply: - Usage: optional (pm8994 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_bst_byp-supply: - Usage: optional (pmi8994 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_s6-supply: -- vdd_s7-supply: -- vdd_s8-supply: -- vdd_s9-supply: -- vdd_s10-supply: -- vdd_s11-supply: -- vdd_s12-supply: -- vdd_s13-supply: -- vdd_l1_l27-supply: -- vdd_l20_l24-supply: -- vdd_l26-supply: -- vdd_l2_l8_l17-supply: -- vdd_l3_l11-supply: -- vdd_l4_l5-supply: -- vdd_l6-supply: -- vdd_l7_l12_l14_l15-supply: -- vdd_l9-supply: -- vdd_l10_l23_l25-supply: -- vdd_l13_l19_l21-supply: -- vdd_l16_l28-supply: -- vdd_l18_l22-supply: -- vdd_lvs1_lvs2-supply: - Usage: optional (pmi8998 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_s6-supply: -- vdd_s7-supply: -- vdd_s8-supply: -- vdd_s9-supply: -- vdd_s10-supply: -- vdd_s11-supply: -- vdd_s12-supply: -- vdd_l1_l11-supply: -- vdd_l2_l3_l4_l27-supply: -- vdd_l5_l7-supply: -- vdd_l6_l12_l14_l15_l26-supply: -- vdd_l8-supply: -- vdd_l9_l10_l13_l20_l23_l24-supply: -- vdd_l16_l25-supply: -- vdd_l17-supply: -- vdd_l18-supply: -- vdd_l19-supply: -- vdd_l21-supply: -- vdd_l22-supply: - Usage: optional (pma8084 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_bob-supply: - Usage: optional (pmi8998 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_l1_l2-supply: -- vdd_l3_l8-supply: -- vdd_l4-supply: -- vdd_l5_l6-supply: -- vdd_l7-supply: -- vdd_l3_l8-supply: -- vdd_l9-supply: -- vdd_l10_l11_l12_l13-supply: - Usage: optional (pms405 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -The regulator node houses sub-nodes for each regulator within the device. Each -sub-node is identified using the node's name, with valid values listed for each -of the pmics below. - -pm8841: - s1, s2, s3, s4, s5, s6, s7, s8 - -pm8916: - s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, - l14, l15, l16, l17, l18 - -pm8941: - s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, - l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, - lvs3, 5vs1, 5vs2 - -pm8994: - s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5, - l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, - l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2 - -pm8998: - s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, s13, l1, l2, l3, l4, - l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, - l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2 - -pma8084: - s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5, - l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, - l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1 - -pmi8994: - s1, s2, s3, boost-bypass - -pmi8998: - bob - -pms405: - s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, - l13 - -The content of each sub-node is defined by the standard binding for regulators - -see regulator.txt. - -= EXAMPLE - - smd { - compatible = "qcom,smd"; - - rpm { - interrupts = <0 168 1>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; - - rpm_requests { - compatible = "qcom,rpm-msm8974"; - qcom,smd-channels = "rpm_requests"; - - pm8941-regulators { - compatible = "qcom,rpm-pm8941-regulators"; - vdd_l13_l20_l23_l24-supply = <&pm8941_boost>; - - pm8941_s3: s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8941_boost: s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - pm8941_l20: l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - }; - }; - }; - }; - };
Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml new file +106 -0
106 lines not on this page · raw message
Signature · 1 line
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Re: [PATCH V2 6/6] dt-bindings: regulator: convert QCOM SMD-RPM regulator document to YAML schema
Quoted 10 lines · Kathiravan T
Convert qcom,smd-rpm-regulator.txt document to YAML schema
Signed-off-by Kathiravan T <[email protected]>--- .../bindings/regulator/qcom,smd-rpm-regulator.txt | 321 --------------------- .../bindings/regulator/qcom,smd-rpm-regulator.yaml | 106 +++++++ 2 files changed, 106 insertions(+), 321 deletions(-) delete mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
Mark Brown
maintainerQuoted 8 lines · Kathiravan T
IPQ6018 SoC uses the PMIC MP5496. SMPA2 and LDOA2 regulator of MP5496 controls the APSS and SDCC voltage scaling respectively. Add support for the same.
changes since V1:
- Moved YAML conversion to the last as per Mark's comments[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[1/2] regulator: add MP5496 regulator compatible
commit: 93e39d096d7312e38cf502be4e516cff7acf34fa
[2/2] regulator: qcom_smd: Add MP5496 regulators
commit: 47894c859479a9e3472657c7acf2c7ba35778059All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Hi Bjorn, Can you help to review the below patches in this series?
dt-bindings: soc: qcom: Add IPQ6018 compatible
soc: qcom: smd-rpm: Add IPQ6018 compatible
Hi Rob, Can you help to review the YAML schema in this series?
Thanks,
Kathiravan T.
Quoted 28 lines · Kathiravan T
IPQ6018 SoC uses the PMIC MP5496. SMPA2 and LDOA2 regulator of MP5496 controls the APSS and SDCC voltage scaling respectively. Add support for the same.
changes since V1:
- Moved YAML conversion to the last as per Mark's commentsKathiravan T (6):
dt-bindings: soc: qcom: Add IPQ6018 compatible
soc: qcom: smd-rpm: Add IPQ6018 compatible
dt-bindings: regulator: add MP5496 regulator compatible
regulator:qcom_smd: Add MP5496 regulators
dt-bindings: soc: qcom: convert the SMD-RPM document to YAML schema
dt-bindings: regulator: convert QCOM SMD-RPM regulator document to
YAML schema.../bindings/regulator/qcom,smd-rpm-regulator.txt | 320 --------------------- .../bindings/regulator/qcom,smd-rpm-regulator.yaml | 106 +++++++ .../devicetree/bindings/soc/qcom/qcom,smd-rpm.txt | 62 ---- .../devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml | 92 ++++++ drivers/regulator/qcom_smd-regulator.c | 34 +++ drivers/soc/qcom/smd-rpm.c | 1 + 6 files changed, 233 insertions(+), 382 deletions(-)delete mode 100644
Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txtcreate mode 100644Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yamldelete mode 100644Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txtcreate mode 100644Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
Signature · 1 line
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation