Skip to contentSkip to conversation

led: led_cortina: Add CAxxx LED support

PATCH New Alex Nemirovsky 3 participants 5 messages Jul 1, 2020 – Aug 8, 2020 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH v9 1/2 led: led_cortina: Add CAxxx LED support

From: Jway Lin <[email protected]>

Add Cortina Access LED controller support for CAxxxx SOCs

Add head file fixed link error and remove unused flashing function

---

Changes in v9:
- Remove unused LED blink function
- Include log.h and linux/bitops.h to avoid compile warnings

Changes in v8:
- No code change
- Split out individual driver from Cortina Package 2 patch series to help streamline acceptence into master

Changes in v7:
- rename OFFSET to SHIFT from macros
- add additinal struct comments
- Reading the DT should really happen in the ofdata_to_platdata method

Changes in v4:
- remove unused macros
- remove cortina prefix from macros
- remove use BSS variable
- further cleanup to meet code style guidelines
- add additinal struct comments
- rename DT blink rate symbol

 MAINTAINERS               |   8 +-
 drivers/led/Kconfig       |   8 ++
 drivers/led/Makefile      |   1 +
 drivers/led/led_cortina.c | 298 ++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 314 insertions(+), 1 deletion(-)
 create mode 100644 drivers/led/led_cortina.c
MAINTAINERS +7 -1
index db8cecd..8867d14 100644
@@ -182,6 +182,9 @@ F:	drivers/gpio/cortina_gpio.c
 F:	drivers/watchdog/cortina_wdt.c
 F:	drivers/serial/serial_cortina.c
 F:	drivers/mmc/ca_dw_mmc.c
+F:	drivers/i2c/i2c-cortina.c
+F:	drivers/i2c/i2c-cortina.h
+F:	drivers/led/led_cortina.c
 
 ARM/CZ.NIC TURRIS MOX SUPPORT
 M:	Marek Behun <[email protected]>
@@ -738,6 +741,9 @@ F:	drivers/gpio/cortina_gpio.c
 F:	drivers/watchdog/cortina_wdt.c
 F:	drivers/serial/serial_cortina.c
 F:	drivers/mmc/ca_dw_mmc.c
+F:	drivers/i2c/i2c-cortina.c
+F:	drivers/i2c/i2c-cortina.h
+F:	drivers/led/led_cortina.c
 
 MIPS MSCC
 M:	Gregory CLEMENT <[email protected]>
@@ -830,7 +836,7 @@ S:	Maintained
 F:	arch/powerpc/
 
 POWERPC MPC8XX
-M:	Christophe Leroy <[email protected]>
+M:	Christophe Leroy <[email protected]>
 S:	Maintained
 T:	git https://gitlab.denx.de/u-boot/custodians/u-boot-mpc8xx.git
 F:	arch/powerpc/cpu/mpc8xx/
drivers/led/Kconfig +8 -0
index 6675934..cc87fbf 100644
@@ -35,6 +35,14 @@ config LED_BCM6858
 	  This option enables support for LEDs connected to the BCM6858
 	  HW has blinking capabilities and up to 32 LEDs can be controlled.
 
+config LED_CORTINA
+	bool "LED Support for Cortina Access CAxxxx SoCs"
+	depends on LED && (CORTINA_PLATFORM)
+	help
+	  This option enables support for LEDs connected to the Cortina
+	  Access CAxxxx SOCs.
+
+
 config LED_BLINK
 	bool "Support LED blinking"
 	depends on LED
drivers/led/Makefile +1 -0
index 3654dd3..8e3ae7f 100644
@@ -8,3 +8,4 @@ obj-$(CONFIG_LED_BCM6328) += led_bcm6328.o
 obj-$(CONFIG_LED_BCM6358) += led_bcm6358.o
 obj-$(CONFIG_LED_BCM6858) += led_bcm6858.o
 obj-$(CONFIG_$(SPL_)LED_GPIO) += led_gpio.o
+obj-$(CONFIG_LED_CORTINA) += led_cortina.o
drivers/led/led_cortina.c new file +298 -0

298 lines not on this page · raw message

Signature · 1 line
2.7.4
#1 lore raw

PATCH v9 2/2 board: presidio: add LED support

From: Jway Lin <[email protected]>

Add LED support for Cortina Access Presidio Engineering Board

CC Simon Glass <[email protected]>

---

(no changes since v4)

Changes in v4:
- rename DT blink rate symbol

 arch/arm/dts/ca-presidio-engboard.dts | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
arch/arm/dts/ca-presidio-engboard.dts +31 -0
index 40c93d7..eef433e 100644
@@ -64,4 +64,35 @@
 			spi-max-frequency = <108000000>;
 		};
 	};
+
+	leds: led-controller at f43200f0 {
+		compatible = "cortina,ca-leds";
+		reg = <0x0 0xf43200f0 0x40>;
+
+		cortina,blink-rate1 = <256>;
+		cortina,blink-rate2 = <512>;
+
+		led at 0 {
+			pin = <0>;
+			active-low;
+			blink-sel =<0>;
+			port = <0>;
+			off-event = <0>;
+			label = "led0";
+		};
+
+		led at 1 {
+			pin = <1>;
+			active-low;
+			blink-sel =<1>;
+			label = "led1";
+		};
+
+		led at 2 {
+			pin = <2>;
+			active-low;
+			label = "led2";
+		};
+
+	};
 };
Signature · 1 line
2.7.4
#2 lore raw

PATCH v9 2/2 board: presidio: add LED support

Quoted 9 lines · Alex Nemirovsky

From: Jway Lin <[email protected]>

Add LED support for Cortina Access Presidio Engineering Board

CC Simon Glass <[email protected]>

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200808/985d94c6/attachment.sig>
#3 lore raw

PATCH v9 1/2 led: led_cortina: Add CAxxx LED support

In reply to Alex Nemirovsky
Quoted 35 lines · Alex Nemirovsky

From: Jway Lin <[email protected]>

Add Cortina Access LED controller support for CAxxxx SOCs

Add head file fixed link error and remove unused flashing function

---

Changes in v9:
- Remove unused LED blink function
- Include log.h and linux/bitops.h to avoid compile warnings

Changes in v8:
- No code change
- Split out individual driver from Cortina Package 2 patch series to help streamline acceptence into master

Changes in v7:
- rename OFFSET to SHIFT from macros
- add additinal struct comments
- Reading the DT should really happen in the ofdata_to_platdata method

Changes in v4:
- remove unused macros
- remove cortina prefix from macros
- remove use BSS variable
- further cleanup to meet code style guidelines
- add additinal struct comments
- rename DT blink rate symbol

Quoted 6 lines
 MAINTAINERS               |   8 +-
 drivers/led/Kconfig       |   8 ++
 drivers/led/Makefile      |   1 +
 drivers/led/led_cortina.c | 298 ++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 314 insertions(+), 1 deletion(-)
 create mode 100644 drivers/led/led_cortina.c
#4 lore raw

PATCH v9 1/2 led: led_cortina: Add CAxxx LED support

In reply to Alex Nemirovsky
Quoted 10 lines · Alex Nemirovsky

From: Jway Lin <[email protected]>

Add Cortina Access LED controller support for CAxxxx SOCs

Add head file fixed link error and remove unused flashing function

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200808/786459fc/attachment.sig>