configs/rock_pi_n8: new defconfig
PATCH 1/1 configs/rock_pi_n8: new defconfig
Add initial support for RK3288 SOM based radxa rockpi-n8 target with below features:
- Custom U-Boot 2020.07-rc4
https://github.com/amarula/u-boot-amarula.git
branch rock-pi
- Custom Linux 5.7.0-rc1
https://github.com/amarula/linux-amarula.git
branch rockpi
- GPT partition layout is being used
- Default packages from buildroot
---
NOTE:
- patches for this target are submitted to Linux and u-boot mainline, once accepted and merged, we use mainline Linux and u-boot.
--- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/radxa/rockpi-n8/extlinux.conf | 4 +++ board/radxa/rockpi-n8/genimage.cfg | 39 ++++++++++++++++++++++++ board/radxa/rockpi-n8/post-build.sh | 5 +++ board/radxa/rockpi-n8/readme.txt | 61 +++++++++++++++++++++++++++++++++++++ configs/rock_pi_n8_defconfig | 49 +++++++++++++++++++++++++++++ 7 files changed, 161 insertions(+) create mode 100644 board/radxa/rockpi-n8/extlinux.conf create mode 100644 board/radxa/rockpi-n8/genimage.cfg create mode 100755 board/radxa/rockpi-n8/post-build.sh create mode 100644 board/radxa/rockpi-n8/readme.txt create mode 100644 configs/rock_pi_n8_defconfig
.gitlab-ci.yml +1 -0
@@ -324,6 +324,7 @@ roc_pc_rk3399_defconfig: { extends: .defconfig } rock64_defconfig: { extends: .defconfig } rockpro64_defconfig: { extends: .defconfig } rock_pi_4_defconfig: { extends: .defconfig } +rock_pi_n8_defconfig: { extends: .defconfig } rock_pi_n10_defconfig: { extends: .defconfig } roseapplepi_defconfig: { extends: .defconfig } s6lx9_microboard_defconfig: { extends: .defconfig }
DEVELOPERS +2 -0
@@ -2405,6 +2405,7 @@ F: board/friendlyarm/nanopc-t4 F: board/friendlyarm/nanopi-m4 F: board/orangepi/orangepi-rk3399 F: board/radxa/rockpi-4 +F: board/radxa/rockpi-n8 F: board/radxa/rockpi-n10 F: board/pine64/rockpro64 F: configs/nanopc_t4_defconfig
@@ -2412,6 +2413,7 @@ F: configs/nanopi_m4_defconfig F: configs/orangepi_rk3399_defconfig F: configs/roc_pc_rk3399_defconfig F: configs/rock_pi_4_defconfig +F: configs/rock_pi_n8_defconfig F: configs/rock_pi_n10_defconfig F: configs/rockpro64_defconfig F: package/arm-gnu-a-toolchain/
board/radxa/rockpi-n8/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label RK3399_ROCKPI_N8 linux + kernel /uImage + devicetree /rk3288-rock-pi-n8.dtb + append console=ttyS2,115200n8 root=/dev/mmcblk0p4 rw rootwait
board/radxa/rockpi-n8/genimage.cfg new file +39 -0
@@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "uImage", + "rk3288-rock-pi-n8.dtb", + "extlinux" + } + } + size = 112M +} + +image sdcard.img { + + hdimage { + gpt = true + } + + partition loader1 { + image = "idbloader.img" + offset = 32K + } + + partition loader2 { + image = "u-boot-dtb.img" + offset = 8M + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 16M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/radxa/rockpi-n8/post-build.sh new file +5 -0
@@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
board/radxa/rockpi-n8/readme.txt new file +61 -0
61 lines not on this page · raw message
configs/rock_pi_n8_defconfig new file +49 -0
49 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 1/1 configs/rock_pi_n8: new defconfig
Quoted 72 lines · Suniel Mahesh
Add initial support for RK3288 SOM based radxa rockpi-n8 target with below features:
- Custom U-Boot 2020.07-rc4
https://github.com/amarula/u-boot-amarula.git
branch rock-pi
- Custom Linux 5.7.0-rc1
https://github.com/amarula/linux-amarula.git
branch rockpi
- GPT partition layout is being used
- Default packages from buildrootSigned-off-by Suniel Mahesh <[email protected]>---
NOTE:
- patches for this target are submitted to Linux and u-boot mainline, once accepted and merged, we use mainline Linux and u-boot.--- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/radxa/rockpi-n8/extlinux.conf | 4 +++ board/radxa/rockpi-n8/genimage.cfg | 39 ++++++++++++++++++++++++ board/radxa/rockpi-n8/post-build.sh | 5 +++ board/radxa/rockpi-n8/readme.txt | 61 +++++++++++++++++++++++++++++++++++++ configs/rock_pi_n8_defconfig | 49 +++++++++++++++++++++++++++++ 7 files changed, 161 insertions(+) create mode 100644 board/radxa/rockpi-n8/extlinux.conf create mode 100644 board/radxa/rockpi-n8/genimage.cfg create mode 100755 board/radxa/rockpi-n8/post-build.sh create mode 100644 board/radxa/rockpi-n8/readme.txt create mode 100644 configs/rock_pi_n8_defconfig.gitlab-ci.yml +1
-0@@ -324,6 +324,7 @@ roc_pc_rk3399_defconfig: { extends: .defconfig } rock64_defconfig: { extends: .defconfig } rockpro64_defconfig: { extends: .defconfig } rock_pi_4_defconfig: { extends: .defconfig } +rock_pi_n8_defconfig: { extends: .defconfig } rock_pi_n10_defconfig: { extends: .defconfig } roseapplepi_defconfig: { extends: .defconfig } s6lx9_microboard_defconfig: { extends: .defconfig }DEVELOPERS +2
-0@@ -2405,6 +2405,7 @@ F: board/friendlyarm/nanopc-t4 F: board/friendlyarm/nanopi-m4 F: board/orangepi/orangepi-rk3399 F: board/radxa/rockpi-4 +F: board/radxa/rockpi-n8 F: board/radxa/rockpi-n10 F: board/pine64/rockpro64 F: configs/nanopc_t4_defconfig@@ -2412,6 +2413,7 @@ F: configs/nanopi_m4_defconfig F: configs/orangepi_rk3399_defconfig F: configs/roc_pc_rk3399_defconfig F: configs/rock_pi_4_defconfig +F: configs/rock_pi_n8_defconfig F: configs/rock_pi_n10_defconfig F: configs/rockpro64_defconfig F: package/arm-gnu-a-toolchain/board/radxa/rockpi-n8/extlinux.conf new file +0
-0
board/radxa/rockpi-n8/extlinux.conf line 4
Quoted 4 lines
board/radxa/rockpi-n8/extlinux.conf new file +4
-0@@ -0,0 +1,4 @@ +label RK3399_ROCKPI_N8 linux + kernel /uImage + devicetree /rk3288-rock-pi-n8.dtb + append console=ttyS2,115200n8 root=/dev/mmcblk0p4 rw rootwait
Better replace this root device into PARTUUID you can add GPT part ID for rootfs.
Quoted 33 lines
board/radxa/rockpi-n8/genimage.cfg new file +27
-0@@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "uImage", + "rk3288-rock-pi-n8.dtb", + "extlinux" + } + } + size = 112M +} + +image sdcard.img { + + hdimage { + gpt = true + } + + partition loader1 { + image = "idbloader.img" + offset = 32K + } + + partition loader2 { + image = "u-boot-dtb.img" + offset = 8M + } +
board/radxa/rockpi-n8/genimage.cfg line 37
Quoted 10 lines
board/radxa/rockpi-n8/genimage.cfg new file +10
-0+ partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 16M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4"
partid here.
PATCH 1/1 configs/rock_pi_n8: new defconfig
In reply to Suniel MaheshHello,
configs/rock_pi_n8_defconfig line 6
Quoted 12 lines · On Tue, 7 Jul 2020 10:28:07 +0530 Suniel Mahesh <[email protected]>…
configs/rock_pi_n8_defconfig new file +6
-0@@ -0,0 +1,49 @@ +# Architecture +BR2_arm=y +BR2_cortex_a17=y +BR2_ARM_FPU_NEON_VFPV4=y + +# Linux headers same as kernel, a 5.4 series
5.7 series
configs/rock_pi_n8_defconfig line 14
Quoted 6 lines
configs/rock_pi_n8_defconfig new file +6
-0+# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rock-pi"
This is a branch, we need a tag, or commit. Or better, an upstream version.
configs/rock_pi_n8_defconfig line 28
Quoted 5 lines
configs/rock_pi_n8_defconfig new file +5
-0+# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/amarula/linux-amarula.git" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rockpi"
Ditto: this is a branch, we need a tag or commit. Or better, an upstream version.
configs/rock_pi_n8_defconfig line 32
Quoted 4 lines
configs/rock_pi_n8_defconfig new file +4
-0+BR2_LINUX_KERNEL_USE_DEFCONFIG=y +BR2_LINUX_KERNEL_DEFCONFIG="multi_v7" +BR2_LINUX_KERNEL_UIMAGE=y +BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x02000000"
Why a uImage, with a modern U-Boot ? This doesn't make sense.
configs/rock_pi_n8_defconfig line 35
Quoted 3 lines
configs/rock_pi_n8_defconfig new file +3
-0+BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-rock-pi-n8" +BR2_LINUX_KERNEL_INSTALL_TARGET=y
This is useless since the kernel image is in a separate FAT filesystem.
configs/rock_pi_n8_defconfig line 39
Quoted 4 lines
configs/rock_pi_n8_defconfig new file +4
-0+ +# Filesystem +BR2_TARGET_GENERIC_HOSTNAME="rockpi-n8" +BR2_TARGET_GENERIC_ISSUE="Welcome to ROCKPI-N8..!!"
Drop the "..!!" at the end of this.
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH v2 1/1 configs/rock_pi_n8: new defconfig
Add initial support for RK3288 SOM based radxa rockpi-n8 target with below features:
- Custom U-Boot 2020.07-rc4
https://github.com/amarula/u-boot-amarula.git
commit: "ba120841bf40ebaed049d64bb4f980083a1cf6b7"
- Custom Linux 5.7.0-rc1
https://github.com/amarula/linux-amarula.git
commit: "5dcb0132685b07beb82065c5d7521e6c555c55b6"
- GPT partition layout is being used
- Default packages from buildroot
---
Changes for v2:
- As suggested by Thomas Pettazonni, replaced custom repo version with commit ID for both u-boot and Linux.
- Replaced legacy uImage with zImage
- cleanup's
- Will send a patch with upstream uboot and Linux once the patches are merged.
--- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/radxa/rockpi-n8/extlinux.conf | 4 +++ board/radxa/rockpi-n8/genimage.cfg | 39 ++++++++++++++++++++++++ board/radxa/rockpi-n8/post-build.sh | 5 +++ board/radxa/rockpi-n8/readme.txt | 61 +++++++++++++++++++++++++++++++++++++ configs/rock_pi_n8_defconfig | 46 ++++++++++++++++++++++++++++ 7 files changed, 158 insertions(+) create mode 100644 board/radxa/rockpi-n8/extlinux.conf create mode 100644 board/radxa/rockpi-n8/genimage.cfg create mode 100755 board/radxa/rockpi-n8/post-build.sh create mode 100644 board/radxa/rockpi-n8/readme.txt create mode 100644 configs/rock_pi_n8_defconfig
.gitlab-ci.yml +1 -0
@@ -323,6 +323,7 @@ riotboard_defconfig: { extends: .defconfig } roc_pc_rk3399_defconfig: { extends: .defconfig } rock64_defconfig: { extends: .defconfig } rock_pi_4_defconfig: { extends: .defconfig } +rock_pi_n8_defconfig: { extends: .defconfig } rock_pi_n10_defconfig: { extends: .defconfig } roseapplepi_defconfig: { extends: .defconfig } s6lx9_microboard_defconfig: { extends: .defconfig }
DEVELOPERS +2 -0
@@ -2418,9 +2418,11 @@ F: package/powertop/ N: Suniel Mahesh <[email protected]> F: board/firefly/ F: board/radxa/rockpi-4 +F: board/radxa/rockpi-n8 F: board/radxa/rockpi-n10 F: configs/roc_pc_rk3399_defconfig F: configs/rock_pi_4_defconfig +F: configs/rock_pi_n8_defconfig F: configs/rock_pi_n10_defconfig F: package/arm-gnu-a-toolchain/
board/radxa/rockpi-n8/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label RK3288_ROCKPI_N8 linux + kernel /zImage + devicetree /rk3288-rock-pi-n8.dtb + append console=ttyS2,115200n8 root=/dev/mmcblk0p4 rw rootwait
board/radxa/rockpi-n8/genimage.cfg new file +39 -0
@@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "zImage", + "rk3288-rock-pi-n8.dtb", + "extlinux" + } + } + size = 16M +} + +image sdcard.img { + + hdimage { + gpt = true + } + + partition loader1 { + image = "idbloader.img" + offset = 32K + } + + partition loader2 { + image = "u-boot-dtb.img" + offset = 8M + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 16M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/radxa/rockpi-n8/post-build.sh new file +5 -0
@@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
board/radxa/rockpi-n8/readme.txt new file +61 -0
61 lines not on this page · raw message
configs/rock_pi_n8_defconfig new file +46 -0
46 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v2 1/1 configs/rock_pi_n8: new defconfig
Hi Thomas and Buildroot Team,
Quoted 13 lines · Suniel Mahesh
Add initial support for RK3288 SOM based radxa rockpi-n8 target with below features:
- Custom U-Boot 2020.07-rc4
https://github.com/amarula/u-boot-amarula.git
commit: "ba120841bf40ebaed049d64bb4f980083a1cf6b7"
- Custom Linux 5.7.0-rc1
https://github.com/amarula/linux-amarula.git
commit: "5dcb0132685b07beb82065c5d7521e6c555c55b6"
- GPT partition layout is being used
- Default packages from buildrootSigned-off-by Suniel Mahesh <[email protected]>
Quoted 10 lines
---
Changes for v2:
- As suggested by Thomas Pettazonni, replaced custom repo version with commit ID for both u-boot and Linux.
- Replaced legacy uImage with zImage
- cleanup's
- Will send a patch with upstream uboot and Linux once the patches are merged.
---
Can you please review this patch and suggest for any changes required.
Regards
Suniel
.gitlab-ci.yml | 1 +
Quoted 238 lines
DEVELOPERS | 2 ++ board/radxa/rockpi-n8/extlinux.conf | 4 +++ board/radxa/rockpi-n8/genimage.cfg | 39 ++++++++++++++++++++++++ board/radxa/rockpi-n8/post-build.sh | 5 +++ board/radxa/rockpi-n8/readme.txt | 61 +++++++++++++++++++++++++++++++++++++ configs/rock_pi_n8_defconfig | 46 ++++++++++++++++++++++++++++ 7 files changed, 158 insertions(+) create mode 100644 board/radxa/rockpi-n8/extlinux.conf create mode 100644 board/radxa/rockpi-n8/genimage.cfg create mode 100755 board/radxa/rockpi-n8/post-build.sh create mode 100644 board/radxa/rockpi-n8/readme.txt create mode 100644 configs/rock_pi_n8_defconfig.gitlab-ci.yml +1
-0@@ -323,6 +323,7 @@ riotboard_defconfig: { extends: .defconfig } roc_pc_rk3399_defconfig: { extends: .defconfig } rock64_defconfig: { extends: .defconfig } rock_pi_4_defconfig: { extends: .defconfig } +rock_pi_n8_defconfig: { extends: .defconfig } rock_pi_n10_defconfig: { extends: .defconfig } roseapplepi_defconfig: { extends: .defconfig } s6lx9_microboard_defconfig: { extends: .defconfig }DEVELOPERS +2
-0@@ -2418,9 +2418,11 @@ F: package/powertop/ N: Suniel Mahesh <[email protected]> F: board/firefly/ F: board/radxa/rockpi-4 +F: board/radxa/rockpi-n8 F: board/radxa/rockpi-n10 F: configs/roc_pc_rk3399_defconfig F: configs/rock_pi_4_defconfig +F: configs/rock_pi_n8_defconfig F: configs/rock_pi_n10_defconfig F: package/arm-gnu-a-toolchain/board/radxa/rockpi-n8/extlinux.conf new file +4
-0@@ -0,0 +1,4 @@ +label RK3288_ROCKPI_N8 linux + kernel /zImage + devicetree /rk3288-rock-pi-n8.dtb + append console=ttyS2,115200n8 root=/dev/mmcblk0p4 rw rootwaitboard/radxa/rockpi-n8/genimage.cfg new file +39
-0@@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "zImage", + "rk3288-rock-pi-n8.dtb", + "extlinux" + } + } + size = 16M +} + +image sdcard.img { + + hdimage { + gpt = true + } + + partition loader1 { + image = "idbloader.img" + offset = 32K + } + + partition loader2 { + image = "u-boot-dtb.img" + offset = 8M + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 16M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}board/radxa/rockpi-n8/post-build.sh new file +5
-0@@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf
$BINARIES_DIR/extlinux/extlinux.confboard/radxa/rockpi-n8/readme.txt new file +50
-0@@ -0,0 +1,61 @@ +RADXA ROCKPI-N8 +================ +https://wiki.radxa.com/RockpiN8 + +Build: +====== + $ make rock_pi_n8_defconfig + $ make + +Files created in output directory +================================= + +output/images +. +??? boot.vfat +??? extlinux +??? idbloader.img +??? rk3288-rock-pi-n8.dtb +??? rootfs.ext2 +??? rootfs.ext4 -> rootfs.ext2 +??? rootfs.tar +??? sdcard.img +??? u-boot.bin +??? u-boot-dtb.bin +??? u-boot-dtb.img +??? zImage + +Creating bootable SD card: +========================== + +Simply invoke (as root) + +sudo dd if=output/images/sdcard.img of=/dev/sdX && sync + +Where X is your SD card device. + +Booting: +======== + +Serial console: +--------------- +RockPi-N8 has a 40-pin GPIO header. The pin layout is as follows: + +pin 6: gnd +pin 8: tx +pin 10: rx + +Baudrate for this board is 115200. + +The boot order on rockpi-n8 is emmc, sd. If emmc contains a valid Image,the board
board/radxa/rockpi-n8/readme.txt new file +11
-0+always boots from emmc. To boot from SD, erase emmc as per the guide: + +https://wiki.amarulasolutions.com/bsp/setup/rockchip/rk3399_emmc.html + +Login: +------ +Enter 'root' as login user, and the prompt is ready. + +wiki link: +---------- +https://wiki.amarulasolutions.com/bsp/rockchip/rk3288/rock-pi-n8.htmlconfigs/rock_pi_n8_defconfig new file +13
-0@@ -0,0 +1,46 @@ +# Architecture +BR2_arm=y +BR2_cortex_a17=y +BR2_ARM_FPU_NEON_VFPV4=y + +# Linux headers same as kernel, a 5.7 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_7=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git"
configs/rock_pi_n8_defconfig new file +14
-0+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="ba120841bf40ebaed049d64bb4f980083a1cf6b7" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock-pi-n8-rk3288" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y +BR2_TARGET_UBOOT_FORMAT_DTB_BIN=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/amarula/linux-amarula.git"
configs/rock_pi_n8_defconfig new file +19
-1+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="5dcb0132685b07beb82065c5d7521e6c555c55b6" +BR2_LINUX_KERNEL_USE_DEFCONFIG=y +BR2_LINUX_KERNEL_DEFCONFIG="multi_v7" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-rock-pi-n8" + +# Filesystem +BR2_TARGET_GENERIC_HOSTNAME="rockpi-n8" +BR2_TARGET_GENERIC_ISSUE="Welcome to ROCKPI-N8" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="64M" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/radxa/rockpi-n8/genimage.cfg" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/radxa/rockpi-n8/post-build.sh" --
Quoted 3 lines
2.7.4
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200803/074f9893/attachment.html>
PATCH v2 1/1 configs/rock_pi_n8: new defconfig
Hi Thomas and Buildroot Team,
Quoted 29 lines · Suniel Mahesh
Hi Thomas and Buildroot Team,
Quoted 14 lines · Suniel Mahesh
Add initial support for RK3288 SOM based radxa rockpi-n8 target with below features:
- Custom U-Boot 2020.07-rc4
https://github.com/amarula/u-boot-amarula.git
commit: "ba120841bf40ebaed049d64bb4f980083a1cf6b7"
- Custom Linux 5.7.0-rc1
https://github.com/amarula/linux-amarula.git
commit: "5dcb0132685b07beb82065c5d7521e6c555c55b6"
- GPT partition layout is being used
- Default packages from buildrootSigned-off-by Suniel Mahesh <[email protected]>Quoted 9 lines
---
Changes for v2:
- As suggested by Thomas Pettazonni, replaced custom repo version with commit ID for both u-boot and Linux.
- Replaced legacy uImage with zImage
- cleanup's
- Will send a patch with upstream uboot and Linux once the patches are merged.
---
Quoted 4 lines
Can you please review this patch and suggest for any changes required.
Regards
Suniel
Can you please review this patch and suggest for any changes required.
Regards
Suniel
Quoted 231 lines
Quoted 231 lines
.gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/radxa/rockpi-n8/extlinux.conf | 4 +++ board/radxa/rockpi-n8/genimage.cfg | 39 ++++++++++++++++++++++++ board/radxa/rockpi-n8/post-build.sh | 5 +++ board/radxa/rockpi-n8/readme.txt | 61 +++++++++++++++++++++++++++++++++++++ configs/rock_pi_n8_defconfig | 46 ++++++++++++++++++++++++++++ 7 files changed, 158 insertions(+) create mode 100644 board/radxa/rockpi-n8/extlinux.conf create mode 100644 board/radxa/rockpi-n8/genimage.cfg create mode 100755 board/radxa/rockpi-n8/post-build.sh create mode 100644 board/radxa/rockpi-n8/readme.txt create mode 100644 configs/rock_pi_n8_defconfig.gitlab-ci.yml +1
-0@@ -323,6 +323,7 @@ riotboard_defconfig: { extends: .defconfig } roc_pc_rk3399_defconfig: { extends: .defconfig } rock64_defconfig: { extends: .defconfig } rock_pi_4_defconfig: { extends: .defconfig } +rock_pi_n8_defconfig: { extends: .defconfig } rock_pi_n10_defconfig: { extends: .defconfig } roseapplepi_defconfig: { extends: .defconfig } s6lx9_microboard_defconfig: { extends: .defconfig }DEVELOPERS +2
-0@@ -2418,9 +2418,11 @@ F: package/powertop/ N: Suniel Mahesh <[email protected]> F: board/firefly/ F: board/radxa/rockpi-4 +F: board/radxa/rockpi-n8 F: board/radxa/rockpi-n10 F: configs/roc_pc_rk3399_defconfig F: configs/rock_pi_4_defconfig +F: configs/rock_pi_n8_defconfig F: configs/rock_pi_n10_defconfig F: package/arm-gnu-a-toolchain/board/radxa/rockpi-n8/extlinux.conf new file +4
-0@@ -0,0 +1,4 @@ +label RK3288_ROCKPI_N8 linux + kernel /zImage + devicetree /rk3288-rock-pi-n8.dtb + append console=ttyS2,115200n8 root=/dev/mmcblk0p4 rw rootwaitboard/radxa/rockpi-n8/genimage.cfg new file +39
-0@@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "zImage", + "rk3288-rock-pi-n8.dtb", + "extlinux" + } + } + size = 16M +} + +image sdcard.img { + + hdimage { + gpt = true + } + + partition loader1 { + image = "idbloader.img" + offset = 32K + } + + partition loader2 { + image = "u-boot-dtb.img" + offset = 8M + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 16M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}board/radxa/rockpi-n8/post-build.sh new file +5
-0@@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.confboard/radxa/rockpi-n8/readme.txt new file +61
-0@@ -0,0 +1,61 @@ +RADXA ROCKPI-N8 +================ +https://wiki.radxa.com/RockpiN8 + +Build: +====== + $ make rock_pi_n8_defconfig + $ make + +Files created in output directory +================================= + +output/images +. +??? boot.vfat +??? extlinux +??? idbloader.img +??? rk3288-rock-pi-n8.dtb +??? rootfs.ext2 +??? rootfs.ext4 -> rootfs.ext2 +??? rootfs.tar +??? sdcard.img +??? u-boot.bin +??? u-boot-dtb.bin +??? u-boot-dtb.img +??? zImage + +Creating bootable SD card: +========================== + +Simply invoke (as root) + +sudo dd if=output/images/sdcard.img of=/dev/sdX && sync + +Where X is your SD card device. + +Booting: +======== + +Serial console: +--------------- +RockPi-N8 has a 40-pin GPIO header. The pin layout is as follows: + +pin 6: gnd +pin 8: tx +pin 10: rx + +Baudrate for this board is 115200. + +The boot order on rockpi-n8 is emmc, sd. If emmc contains a valid Image, the board +always boots from emmc. To boot from SD, erase emmc as per the guide: + +https://wiki.amarulasolutions.com/bsp/setup/rockchip/rk3399_emmc.html + +Login: +------ +Enter 'root' as login user, and the prompt is ready. + +wiki link: +---------- +https://wiki.amarulasolutions.com/bsp/rockchip/rk3288/rock-pi-n8.htmlconfigs/rock_pi_n8_defconfig new file +46
-1@@ -0,0 +1,46 @@ +# Architecture +BR2_arm=y +BR2_cortex_a17=y +BR2_ARM_FPU_NEON_VFPV4=y + +# Linux headers same as kernel, a 5.7 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_7=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="ba120841bf40ebaed049d64bb4f980083a1cf6b7" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock-pi-n8-rk3288" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y +BR2_TARGET_UBOOT_FORMAT_DTB_BIN=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/amarula/linux-amarula.git" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="5dcb0132685b07beb82065c5d7521e6c555c55b6" +BR2_LINUX_KERNEL_USE_DEFCONFIG=y +BR2_LINUX_KERNEL_DEFCONFIG="multi_v7" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-rock-pi-n8" + +# Filesystem +BR2_TARGET_GENERIC_HOSTNAME="rockpi-n8" +BR2_TARGET_GENERIC_ISSUE="Welcome to ROCKPI-N8" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="64M" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/radxa/rockpi-n8/genimage.cfg" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/radxa/rockpi-n8/post-build.sh" --2.7.4
PATCH v2 1/1 configs/rock_pi_n8: new defconfig
In reply to Suniel MaheshHello,
I have applied to next, after a few changes. See below for some comments.
Quoted 9 lines · On Fri, 17 Jul 2020 17:20:34 +0530 Suniel Mahesh <[email protected]>…
Add initial support for RK3288 SOM based radxa rockpi-n8 target with below features:
- Custom U-Boot 2020.07-rc4 https://github.com/amarula/u-boot-amarula.git commit: "ba120841bf40ebaed049d64bb4f980083a1cf6b7" - Custom Linux 5.7.0-rc1 https://github.com/amarula/linux-amarula.git commit: "5dcb0132685b07beb82065c5d7521e6c555c55b6"
Could you do a round of update on the defconfigs you've added recently and try to use non-rc versions of U-Boot/Linux ? And preferably upstream U-Boot/Linux versions instead of Amarula ones.
Quoted 1 line
.gitlab-ci.yml | 1 +
Changing the .gitlab-ci.yml is no longer needed (but it was back when you created this patch, so this is just FYI).
configs/rock_pi_n8_defconfig line 32
Quoted 9 lines
configs/rock_pi_n8_defconfig new file +9
-0+# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/amarula/linux-amarula.git" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="5dcb0132685b07beb82065c5d7521e6c555c55b6" +BR2_LINUX_KERNEL_USE_DEFCONFIG=y +BR2_LINUX_KERNEL_DEFCONFIG="multi_v7" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-rock-pi-n8"
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
was missing here.
configs/rock_pi_n8_defconfig line 39
Quoted 7 lines
configs/rock_pi_n8_defconfig new file +7
-0+ +# Filesystem +BR2_TARGET_GENERIC_HOSTNAME="rockpi-n8" +BR2_TARGET_GENERIC_ISSUE="Welcome to ROCKPI-N8" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="64M"
This was not needed, our default of 60 MB is fine.
configs/rock_pi_n8_defconfig line 43
Quoted 4 lines
configs/rock_pi_n8_defconfig new file +4
-0+BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y
This was apparently not needed, since you're now using a zImage.
Appplied with those changes. Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com