arm: add support for SoC S5P4418
Subsystems (7)
v4 cover arm: add support for SoC S5P4418
This patch adds support for SAMSUNG's/NEXELL's ARM Cortex-A9 based S5P4418 SoC, especially FriendlyARM's NanoPi2 and NanoPC-T2 boards. It is based on the following FriendlyARM's U-Boot version:
https://github.com/friendlyarm/u-boot/tree/nanopi2-v2016.01.
Main changes in relation to nanopi2-v2016.01:
- Cosmetic changes due to patman warnings/errors.
- MMC and Video drivers changed to DM.
- Configs reworked (e.g. "CONFIG_..." moved from s5p4418_nanopi2.h to s5p4418_nanopi2_defconfig)
- SPL related files are not included.
- MACH_TYPE_S5P4418 is not defined/used anymore.
- arch/arm/mach-nexell/include/mach/boot0.h added to generate the NSIH (Nexell System Information Header), substitudes tools/nexell.
- board/s5p4418/ renamed to board/friendlyarm/
- Only the NanoPi2 and NanoPC-T2 boards are supported yet because I do only have the NanoPC-T2 board to test the code (this board uses the NanoPi2 code).
- USB is not supported yet.
- pinctrl-driver/dt is used for mmc and i2c now instead of configuring the I/O-pins in the drivers.
- '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar).
- livetree API (dev_read_...) is used instead of fdt one (fdt...).
The patch-series has been checked by buildman (all arm boards and two m68k boards = M5235EVB):
buildman --step 0 -b master arm
buildman --step 0 -b master M5235EVB
There have been no new warnings or errors.
Changes in v4:
- cosmetic changes in nx_i2c.c: if-else block simplified, defines used for constant values.
Changes in v3:
- arch/arm/mach-nexell/Kconfig: "NEXELL_COMMON" removed, has not been used at all. NEXELL_ARMV7_COMMON and NEXELL_ARMV8_COMMON removed, has been used only in the Kconfig at ARCH_S5P4418 and ARCH_S5P6818. Used "select ..."-statements moved appropriately.
Missing helps added.
- arch/arm/mach-nexell/timer.c: '#include <log.h>' inserted because it has been removed from common.h.
- '#ifdef...' changed to 'if (IS_ENABLED(CONFIG...))' where possible because of appropriate warnings of patman.
- Changed to livetree API as proposed by patman:
fdtdec_get_int() --> dev_read_s32_default()
fdt_getprop() --> dev_read_string()
- pinctrl-driver/dt is used now instead of configuring the i2c I/O-pins in the i2c-driver.
- drivers/i2c/nx_i2c.c: '#include <log.h>' inserted because it has been removed from common.h.
- Changed to livetree API as proposed by patman:
fdtdec_get_int() --> dev_read_s32_default()
- nexell_dw_mmc_dm.c renamed (back) to nexell_dw_mmc.c
- pinctrl-driver/dt is used now instead of configuring the mmc I/O-pins in the mmc-driver.
- nexell_dwmmc_ofdata_to_platdata() reworked, i.e. valid default values are used now (where possible) and the appropriate if-blocks have been removed.
- "nexell," removed from dt-properties, e.g. "nexell,bus-width" changed to "bus-width".
- new dt-property "mmcboost" is used now instead of "CONFIG_BOOST_MMC" which was not defined anywhere.
- Boot error "Loading Environment from MMC... *** Warning - No block device, using default environment" after updating local repository. Bugfix in drivers/mmc/nexell_dw_mmc.c: "#include <clk.h>" changed to "#include <asm/arch/clk.h>". This Bug showed up now because of the commit "dm: clk: add stub when CONFIG_CLK is deactivated" where include/clk.h has been changed.
- drivers/mmc/nexell_dw_mmc.c: '#include <log.h>' inserted because it has been removed from common.h.
- Kconfig: Missing helps added.
- Changed to livetree API as proposed by patman:
fdt_stringlist_count() --> dev_read_string_count() fdt_stringlist_get() --> dev_read_string_index() fdtdec_get_int() --> dev_read_s32_default()
- doc/device-tree-bindings/pinctrl/nexell,s5pxx18-pinctrl.txt added.
- Handling of Configs for LCD backlight control reworked because (among others) not setting CONFIG_S5P4418_ONEWIRE and/or CONFIG_PWM_NX has caused errors when compiling board/friendlyarm/nanopi2/onewire.c.
- pwm.h: () around macro argument x added to avoid precedence issues.
- drivers/video/nexell/s5pxx18_dp_hdmi.c: '#include <log.h>' and '#include <linux/delay.h>' inserted because it has been removed from common.h.
- drivers/video/nexell_display.c: '#include <command.h>' inserted because '#include <image.h>' (includes command.h) has been removed from common.h.
- Changed to livetree API as proposed by patman:
fdtdec_get_int() --> ofnode_read_s32_default()
for (node = ...) --> ofnode_for_each_subnode()
fdt_get_name() --> ofnode_get_name()
fdt_getprop() --> dev_read_string()
- nx_display_probe() removed, nx_display_dev_probe_uclass() renamed to nx_display_probe().
- dts: pinctrl is supported now, therefore s5p4418-pinctrl.dtsi added, mmc- and i2c-entries extended appropriately. New mmc-property "mmcboost" added.
- Handling of Configs for LCD backlight control reworked because (among others) not setting CONFIG_S5P4418_ONEWIRE and/or CONFIG_PWM_NX has caused errors when compiling board/friendlyarm/nanopi2/onewire.c.
- arch/arm/cpu/armv7/s5p4418/cpu.c: '#include <linux/delay.h>' inserted because it has been removed from common.h.
- board/friendlyarm/nanopi2/board.c: Several includes inserted because some includes have been removed from common.h.
- Several initialisations of static variables to 0 removed because of appropriate errors of patman.
- CONFIG_SYS_RESERVE_MEM_SIZE removed, has not been used anymore
- s5p4418_nanopi2_defconfig: "CONFIG_PINCTRL=y" added because pinctrl is supported now. "CONFIG_EFI_LOADER=n" removed (there have been boot errors "efi_runtime_relocate: Unknown relocation type 0" at a previous U-Boot Version without this). "CONFIG_DM_I2C_GPIO=y" removed because I2C-peripherial is used (Nexell I2C driver). Some configs moved down for cosmetic reason.
- Handling of Configs for LCD backlight control reworked because (among others) not setting CONFIG_S5P4418_ONEWIRE and/or CONFIG_PWM_NX has caused errors when compiling board/friendlyarm/nanopi2/onewire.c.
- CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END, CONFIG_CMDLINE_TAG and CONFIG_CMD_BMP moved from s5p4418_nanopi2.h to s5p4418_nanopi2_defconfig.
- "#undef CONFIG_CMD_IMLS" removed in s5p4418_nanopi2.h
Changes in v2:
- arch/arm/mach-nexell/serial.c removed because this is for the UARTs of the S5P6818 SoC which is not supported yet. S5P4418 UARTs are different, here the (existing) PL011-code is used.
- line '... += spl/' in in arch/arm/mach-nexell/Makefile deleted, this change has already been stated in the commit message but was missing nethertheless.
- commit "i2c: mmc: add nexell driver (gpio, i2c, mmc, pwm)" splitted into separate commits for gpio, i2c, mmc, pwm.
- cosmetic: line "obj-$(CONFIG_NX_GPIO) += nx_gpio.o" in drivers/gpio/Makefile moved up.
- several Bugfixes in nx_i2c.c.
- the i2c-driver has been for s5p6818 only. Code extended approriately in order s5p4418 is also working.
- "probe_chip" added to the i2c-driver.
- doc/device-tree-bindings/i2c/nx_i2c.txt added.
- Since drivers/pwm/pwm-nexell.c is an adapted version of s5p-common/pwm.c an appropriately changed version of s5p-common/pwm.c is used now. Therefore arch/arm/mach-s5pc1xx/include/mach/pwm.h copied to arch/arm/mach-nexell/include/mach and s5p-common/Makefile changed appropriately.
- i2c: "nexell,s5pxx18-i2c"-driver is used now instead of "i2c-gpio". i2c0 and i2c1 added. I.e. dts files changed appropriately.
- dts: gmac-, ehci- and dwc2otg-entries removed because the appropriate functionality is not supported yet.
- s5p4418-pinctrl.dtsi removed because there is no pinctrl-driver available.
- "obj-$(CONFIG_ARCH_NEXELL) += s5p-common/" added to arch/arm/cpu/armv7/Makefile since s5p-common/pwm.c is used now instead of drivers/pwm/pwm-nexell.c.
- cosmetic: additional GPL license text removed, SPDX-License-Identifier is enough. Furthermore file path removed (two files).
- USB related configs removed because USB is not supported yet.
- CONFIG_CMD_MEMTEST moved from s5p4418_nanopi2.h to s5p4418_nanopi2_defconfig.
- MAINTAINERS: "F: drivers/pwm/pwm-nexell*" deleted because arch/arm/cpu/armv7/s5p-common/pwm.c is used now. Furthermore double line "F: drivers/video/nexell/" deleted.
Stefan Bosch (14):
arm: add mach-nexell (header files)
arm: add mach-nexell (all files except header files)
gpio: add nexell driver
i2c: add nexell driver
mmc: add nexell driver
pinctrl: add nexell driver
pwm: add driver for nexell
video: add nexell video driver (soc: displaytop)
video: add nexell video driver (soc: mlc, mipi)
video: add nexell video driver (soc: lvds, hdmi)
video: add nexell video driver (soc: dpc, makefile)
video: add nexell video driver (display/video driver)
arm: add support for SoC s5p4418 (cpu) / nanopi2 board
arm: add (default) config for nanopi2 board
MAINTAINERS | 17 + arch/arm/Kconfig | 7 + arch/arm/Makefile | 1 + arch/arm/cpu/armv7/Makefile | 2 + arch/arm/cpu/armv7/s5p-common/Makefile | 13 +- arch/arm/cpu/armv7/s5p-common/pwm.c | 57 +- arch/arm/cpu/armv7/s5p4418/Makefile | 6 + arch/arm/cpu/armv7/s5p4418/cpu.c | 121 ++ arch/arm/dts/Makefile | 3 + arch/arm/dts/s5p4418-nanopi2.dts | 110 ++ arch/arm/dts/s5p4418-pinctrl.dtsi | 135 ++ arch/arm/dts/s5p4418.dtsi | 170 ++ arch/arm/mach-nexell/Kconfig | 58 + arch/arm/mach-nexell/Makefile | 13 + arch/arm/mach-nexell/clock.c | 869 +++++++++ arch/arm/mach-nexell/cmd_boot_linux.c | 144 ++ arch/arm/mach-nexell/config.mk | 11 + arch/arm/mach-nexell/include/mach/boot0.h | 40 + arch/arm/mach-nexell/include/mach/clk.h | 24 + arch/arm/mach-nexell/include/mach/display.h | 273 +++ arch/arm/mach-nexell/include/mach/display_dev.h | 37 + arch/arm/mach-nexell/include/mach/ehci.h | 106 ++ arch/arm/mach-nexell/include/mach/gpio.h | 17 + arch/arm/mach-nexell/include/mach/mipi_display.h | 215 +++ arch/arm/mach-nexell/include/mach/nexell.h | 352 ++++ arch/arm/mach-nexell/include/mach/nx_gpio.h | 103 ++ arch/arm/mach-nexell/include/mach/pwm.h | 54 + arch/arm/mach-nexell/include/mach/reset.h | 19 + arch/arm/mach-nexell/include/mach/sec_reg.h | 15 + arch/arm/mach-nexell/include/mach/tieoff.h | 423 +++++ arch/arm/mach-nexell/nx_gpio.c | 352 ++++ arch/arm/mach-nexell/nx_sec_reg.c | 82 + arch/arm/mach-nexell/reg-call.S | 23 + arch/arm/mach-nexell/reset.c | 33 + arch/arm/mach-nexell/tieoff.c | 107 ++ arch/arm/mach-nexell/timer.c | 299 ++++ board/friendlyarm/Kconfig | 37 + board/friendlyarm/nanopi2/Kconfig | 12 + board/friendlyarm/nanopi2/MAINTAINERS | 7 + board/friendlyarm/nanopi2/Makefile | 7 + board/friendlyarm/nanopi2/board.c | 575 ++++++ board/friendlyarm/nanopi2/hwrev.c | 108 ++ board/friendlyarm/nanopi2/hwrev.h | 15 + board/friendlyarm/nanopi2/lcds.c | 697 ++++++++ board/friendlyarm/nanopi2/nxp-fb.h | 94 + board/friendlyarm/nanopi2/onewire.c | 307 ++++ board/friendlyarm/nanopi2/onewire.h | 15 + configs/s5p4418_nanopi2_defconfig | 147 ++ doc/README.s5p4418 | 63 + doc/device-tree-bindings/i2c/nx_i2c.txt | 28 + .../pinctrl/nexell,s5pxx18-pinctrl.txt | 78 + drivers/gpio/Kconfig | 9 + drivers/gpio/Makefile | 1 + drivers/gpio/nx_gpio.c | 250 +++ drivers/i2c/Kconfig | 9 + drivers/i2c/Makefile | 1 + drivers/i2c/nx_i2c.c | 626 +++++++ drivers/mmc/Kconfig | 8 + drivers/mmc/Makefile | 1 + drivers/mmc/nexell_dw_mmc.c | 237 +++ drivers/pinctrl/Kconfig | 1 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/nexell/Kconfig | 18 + drivers/pinctrl/nexell/Makefile | 7 + drivers/pinctrl/nexell/pinctrl-nexell.c | 66 + drivers/pinctrl/nexell/pinctrl-nexell.h | 68 + drivers/pinctrl/nexell/pinctrl-s5pxx18.c | 220 +++ drivers/pinctrl/nexell/pinctrl-s5pxx18.h | 53 + drivers/video/Kconfig | 10 + drivers/video/Makefile | 1 + drivers/video/nexell/Kconfig | 27 + drivers/video/nexell/Makefile | 12 + drivers/video/nexell/s5pxx18_dp.c | 341 ++++ drivers/video/nexell/s5pxx18_dp_hdmi.c | 545 ++++++ drivers/video/nexell/s5pxx18_dp_lvds.c | 274 +++ drivers/video/nexell/s5pxx18_dp_mipi.c | 677 +++++++ drivers/video/nexell/s5pxx18_dp_rgb.c | 69 + drivers/video/nexell/soc/Makefile | 11 + drivers/video/nexell/soc/s5pxx18_soc_disptop.c | 185 ++ drivers/video/nexell/soc/s5pxx18_soc_disptop.h | 385 ++++ drivers/video/nexell/soc/s5pxx18_soc_disptop_clk.c | 309 ++++ drivers/video/nexell/soc/s5pxx18_soc_disptop_clk.h | 59 + drivers/video/nexell/soc/s5pxx18_soc_disptype.h | 23 + drivers/video/nexell/soc/s5pxx18_soc_dpc.c | 1569 +++++++++++++++++ drivers/video/nexell/soc/s5pxx18_soc_dpc.h | 444 +++++ drivers/video/nexell/soc/s5pxx18_soc_hdmi.c | 50 + drivers/video/nexell/soc/s5pxx18_soc_hdmi.h | 488 +++++ drivers/video/nexell/soc/s5pxx18_soc_lvds.c | 278 +++ drivers/video/nexell/soc/s5pxx18_soc_lvds.h | 83 + drivers/video/nexell/soc/s5pxx18_soc_mipi.c | 580 ++++++ drivers/video/nexell/soc/s5pxx18_soc_mipi.h | 291 +++ drivers/video/nexell/soc/s5pxx18_soc_mlc.c | 1861 ++++++++++++++++++++ drivers/video/nexell/soc/s5pxx18_soc_mlc.h | 429 +++++ drivers/video/nexell_display.c | 651 +++++++ include/configs/s5p4418_nanopi2.h | 257 +++ 95 files changed, 17981 insertions(+), 5 deletions(-) create mode 100644 arch/arm/cpu/armv7/s5p4418/Makefile create mode 100644 arch/arm/cpu/armv7/s5p4418/cpu.c create mode 100644 arch/arm/dts/s5p4418-nanopi2.dts create mode 100644 arch/arm/dts/s5p4418-pinctrl.dtsi create mode 100644 arch/arm/dts/s5p4418.dtsi create mode 100644 arch/arm/mach-nexell/Kconfig create mode 100644 arch/arm/mach-nexell/Makefile create mode 100644 arch/arm/mach-nexell/clock.c create mode 100644 arch/arm/mach-nexell/cmd_boot_linux.c create mode 100644 arch/arm/mach-nexell/config.mk create mode 100644 arch/arm/mach-nexell/include/mach/boot0.h create mode 100644 arch/arm/mach-nexell/include/mach/clk.h create mode 100644 arch/arm/mach-nexell/include/mach/display.h create mode 100644 arch/arm/mach-nexell/include/mach/display_dev.h create mode 100644 arch/arm/mach-nexell/include/mach/ehci.h create mode 100644 arch/arm/mach-nexell/include/mach/gpio.h create mode 100644 arch/arm/mach-nexell/include/mach/mipi_display.h create mode 100644 arch/arm/mach-nexell/include/mach/nexell.h create mode 100644 arch/arm/mach-nexell/include/mach/nx_gpio.h create mode 100644 arch/arm/mach-nexell/include/mach/pwm.h create mode 100644 arch/arm/mach-nexell/include/mach/reset.h create mode 100644 arch/arm/mach-nexell/include/mach/sec_reg.h create mode 100644 arch/arm/mach-nexell/include/mach/tieoff.h create mode 100644 arch/arm/mach-nexell/nx_gpio.c create mode 100644 arch/arm/mach-nexell/nx_sec_reg.c create mode 100644 arch/arm/mach-nexell/reg-call.S create mode 100644 arch/arm/mach-nexell/reset.c create mode 100644 arch/arm/mach-nexell/tieoff.c create mode 100644 arch/arm/mach-nexell/timer.c create mode 100644 board/friendlyarm/Kconfig create mode 100644 board/friendlyarm/nanopi2/Kconfig create mode 100644 board/friendlyarm/nanopi2/MAINTAINERS create mode 100644 board/friendlyarm/nanopi2/Makefile create mode 100644 board/friendlyarm/nanopi2/board.c create mode 100644 board/friendlyarm/nanopi2/hwrev.c create mode 100644 board/friendlyarm/nanopi2/hwrev.h create mode 100644 board/friendlyarm/nanopi2/lcds.c create mode 100644 board/friendlyarm/nanopi2/nxp-fb.h create mode 100644 board/friendlyarm/nanopi2/onewire.c create mode 100644 board/friendlyarm/nanopi2/onewire.h create mode 100644 configs/s5p4418_nanopi2_defconfig create mode 100644 doc/README.s5p4418 create mode 100644 doc/device-tree-bindings/i2c/nx_i2c.txt create mode 100644 doc/device-tree-bindings/pinctrl/nexell,s5pxx18-pinctrl.txt create mode 100644 drivers/gpio/nx_gpio.c create mode 100644 drivers/i2c/nx_i2c.c create mode 100644 drivers/mmc/nexell_dw_mmc.c create mode 100644 drivers/pinctrl/nexell/Kconfig create mode 100644 drivers/pinctrl/nexell/Makefile create mode 100644 drivers/pinctrl/nexell/pinctrl-nexell.c create mode 100644 drivers/pinctrl/nexell/pinctrl-nexell.h create mode 100644 drivers/pinctrl/nexell/pinctrl-s5pxx18.c create mode 100644 drivers/pinctrl/nexell/pinctrl-s5pxx18.h create mode 100644 drivers/video/nexell/Kconfig create mode 100644 drivers/video/nexell/Makefile create mode 100644 drivers/video/nexell/s5pxx18_dp.c create mode 100644 drivers/video/nexell/s5pxx18_dp_hdmi.c create mode 100644 drivers/video/nexell/s5pxx18_dp_lvds.c create mode 100644 drivers/video/nexell/s5pxx18_dp_mipi.c create mode 100644 drivers/video/nexell/s5pxx18_dp_rgb.c create mode 100644 drivers/video/nexell/soc/Makefile create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_disptop.c create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_disptop.h create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_disptop_clk.c create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_disptop_clk.h create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_disptype.h create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_dpc.c create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_dpc.h create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_hdmi.c create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_hdmi.h create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_lvds.c create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_lvds.h create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_mipi.c create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_mipi.h create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_mlc.c create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_mlc.h create mode 100644 drivers/video/nexell_display.c create mode 100644 include/configs/s5p4418_nanopi2.h
Signature · 1 line
1.9.1
PATCH v4 1/14 arm: add mach-nexell (header files)
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- DM_VIDEO support (display_dev.h).
- boot0.h added, handles NSIH --> tools/nexell obsolete.
- gpio.h: Include-path to errno.h changed.
---
(no changes since v2)
Changes in v2:
- cosmetic: additional GPL license text removed, SPDX-License-Identifier is enough.
arch/arm/mach-nexell/include/mach/boot0.h | 40 +++ arch/arm/mach-nexell/include/mach/clk.h | 24 ++ arch/arm/mach-nexell/include/mach/display.h | 273 +++++++++++++++ arch/arm/mach-nexell/include/mach/display_dev.h | 37 ++ arch/arm/mach-nexell/include/mach/ehci.h | 106 ++++++ arch/arm/mach-nexell/include/mach/gpio.h | 17 + arch/arm/mach-nexell/include/mach/mipi_display.h | 215 ++++++++++++ arch/arm/mach-nexell/include/mach/nexell.h | 352 +++++++++++++++++++ arch/arm/mach-nexell/include/mach/nx_gpio.h | 103 ++++++ arch/arm/mach-nexell/include/mach/reset.h | 19 + arch/arm/mach-nexell/include/mach/sec_reg.h | 15 + arch/arm/mach-nexell/include/mach/tieoff.h | 423 +++++++++++++++++++++++ 12 files changed, 1624 insertions(+) create mode 100644 arch/arm/mach-nexell/include/mach/boot0.h create mode 100644 arch/arm/mach-nexell/include/mach/clk.h create mode 100644 arch/arm/mach-nexell/include/mach/display.h create mode 100644 arch/arm/mach-nexell/include/mach/display_dev.h create mode 100644 arch/arm/mach-nexell/include/mach/ehci.h create mode 100644 arch/arm/mach-nexell/include/mach/gpio.h create mode 100644 arch/arm/mach-nexell/include/mach/mipi_display.h create mode 100644 arch/arm/mach-nexell/include/mach/nexell.h create mode 100644 arch/arm/mach-nexell/include/mach/nx_gpio.h create mode 100644 arch/arm/mach-nexell/include/mach/reset.h create mode 100644 arch/arm/mach-nexell/include/mach/sec_reg.h create mode 100644 arch/arm/mach-nexell/include/mach/tieoff.h
arch/arm/mach-nexell/include/mach/boot0.h new file +40 -0
@@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0+ +* +* NSIH (Nexell System Information Header) for FriendlyArm nanopi2 board +* +* The NSIH (first 512 Bytes of u-boot.bin) is necessary for the +* 2nd-Bootloader to get information like load address of U-Boot. +* +* 0x400 must be added to CONFIG_SYS_TEXT_BASE to have the actual load and +* start address because 2nd-Bootloader loads with an offset of 0x400 +* (NSIH + 0x200 bytes are not loaded into RAM). +* +* It has been tested / is working with the following 2nd-Bootloader: +* "BL1 by Nexell V1.0.0-gd551e13 [Built on 2018-01-25 16:58:29]" +* +* (C) Copyright 2020 Stefan Bosch <[email protected]> +*/ + +#ifndef __BOOT0_H +#define __BOOT0_H + +ARM_VECTORS + .space 0x30 + .word (_end - _start) +20 *1024 /* 0x50: load size +* (bin + 20k for DTB) */ + .space 0x4 + .word CONFIG_SYS_TEXT_BASE + 0x400 /* 0x58: load address */ + .word 0x00000000 + .word CONFIG_SYS_TEXT_BASE + 0x400 /* 0x60: start address */ + .space 0x198 + .byte 'N' /* 0x1FC: "NSIH" signature */ + .byte 'S' + .byte 'I' + .byte 'H' + + /* The NSIH + 0x200 bytes are omitted by the 2nd-Bootloader */ + .space 0x200 +_start: + ARM_VECTORS + +#endif /* __BOOT0_H */
arch/arm/mach-nexell/include/mach/clk.h new file +24 -0
@@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0+ +* +* (C) Copyright 2016 Nexell +* Hyunseok, Jung <[email protected]> +*/ + +#ifndef __ASM_ARM_ARCH_CLK_H_ +#define __ASM_ARM_ARCH_CLK_H_ + +struct clk { +unsigned long rate; +}; + +void clk_init (void ); + +struct clk *clk_get (const char *id); +void clk_put (struct clk *clk); +unsigned long clk_get_rate (struct clk *clk); +long clk_round_rate (struct clk *clk,unsigned long rate); +int clk_set_rate (struct clk *clk,unsigned long rate); +int clk_enable (struct clk *clk); +void clk_disable (struct clk *clk); + +#endif
arch/arm/mach-nexell/include/mach/display.h new file +273 -0
273 lines not on this page · raw message
arch/arm/mach-nexell/include/mach/display_dev.h new file +37 -0
@@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0+ +* +* Copyright (C) 2016 Nexell Co., Ltd. +* +* Author: junghyun, kim <[email protected]> +*/ + +#ifndef _NX__DISPLAY_DEV_H_ +#define _NX__DISPLAY_DEV_H_ + +#if definedCONFIG_VIDEO || definedCONFIG_DM_VIDEO +#include <video_fb.h> +#elif definedCONFIG_LCD +#include <lcd.h> +#endif + +struct nx_display_dev { +#if definedCONFIG_VIDEO || definedCONFIG_DM_VIDEO +GraphicDevice graphic_device; +#elif definedCONFIG_LCD +vidinfo_t *panel_info; +#endif +unsigned long base; +int module; +struct dp_sync_info sync; +struct dp_ctrl_info ctrl; +struct dp_plane_top top; +struct dp_plane_info planes[DP_PLANS_NUM ]; +int dev_type; +void *device; +struct dp_plane_info *fb_plane; +unsigned int depth;/* byte per pixel */ +unsigned int fb_addr; +unsigned int fb_size; +}; + +#endif
arch/arm/mach-nexell/include/mach/ehci.h new file +106 -0
106 lines not on this page · raw message
arch/arm/mach-nexell/include/mach/gpio.h new file +17 -0
@@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0+ +* +* (C) Copyright 2016 Nexell +* DeokJin, Lee <[email protected]> +*/ + +#ifndef __ASM_ARCH_NEXELL_GPIO_H +#define __ASM_ARCH_NEXELL_GPIO_H + +#include <asm/io.h> +#include <linux/errno.h> + +#define PIN_BASE 0 + +#define MAX_GPIO_BANKS 5 + +#endif /* __ASM_ARCH_NEXELL_GPIO_H */
arch/arm/mach-nexell/include/mach/mipi_display.h new file +215 -0
215 lines not on this page · raw message
arch/arm/mach-nexell/include/mach/nexell.h new file +352 -0
352 lines not on this page · raw message
arch/arm/mach-nexell/include/mach/nx_gpio.h new file +103 -0
103 lines not on this page · raw message
arch/arm/mach-nexell/include/mach/reset.h new file +19 -0
@@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0+ +* +* (C) Copyright 2016 Nexell +* Youngbok, Park <[email protected]> +*/ + +#ifndef __NEXELL_RESET__ +#define __NEXELL_RESET__ + +#define NUMBER_OF_RESET_MODULE_PIN 69 + +enum rstcon { +RSTCON_ASSERT =0UL , +RSTCON_NEGATE =1UL +}; + +void nx_rstcon_setrst (u32 rstindex,enum rstcon status); + +#endif /* __NEXELL_RESET__ */
arch/arm/mach-nexell/include/mach/sec_reg.h new file +15 -0
@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ +* +* (C) Copyright 2016 Nexell +* Youngbok, Park <[email protected]> +*/ + +#define NEXELL_L2C_SEC_ID 0 +#define NEXELL_MALI_SEC_ID 2 +#define NEXELL_MIPI_SEC_ID 4 +#define NEXELL_TOFF_SEC_ID 6 + +int write_sec_reg_by_id (void __iomem *reg,int val,int id); +int read_sec_reg_by_id (void __iomem *reg,int id); +int read_sec_reg (void __iomem *reg); +int write_sec_reg (void __iomem *reg,int val);
arch/arm/mach-nexell/include/mach/tieoff.h new file +423 -0
423 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v4 1/14 arm: add mach-nexell (header files)
Quoted 6 lines · Stefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
-DM_VIDEOsupport (display_dev.h).
-boot0.hadded, handles NSIH -->tools/nexellobsolete.
-gpio.h: Include-path toerrno.hchanged.Signed-off-by Stefan Bosch <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200729/30c21977/attachment.sig>
PATCH v4 2/14 arm: add mach-nexell (all files except header files)
In reply to Stefan BoschChanges in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- SPL not supported yet --> no spl-directory in arch/arm/mach-nexell. Appropriate line in Makefile removed.
- clock.c: 'section(".data")' added to declaration of clk_periphs[] and core_hz.
- Kconfig: Changes to have a structure like in mach-bcm283x/Kconfig, e.g. "config ..." entries moved from other Kconfig.
- timer.c: 'section(".data")' added to declaration of timestamp and lastdec.
- arch/arm/mach-nexell/serial.c removed because this is for the UARTs of the S5P6818 SoC which is not supported yet. S5P4418 UARTs are different, here the (existing) PL011-code is used.
- '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar).
---
(no changes since v3)
Changes in v3:
- arch/arm/mach-nexell/Kconfig: "NEXELL_COMMON" removed, has not been used at all. NEXELL_ARMV7_COMMON and NEXELL_ARMV8_COMMON removed, has been used only in the Kconfig at ARCH_S5P4418 and ARCH_S5P6818. Used "select ..."-statements moved appropriately. Missing helps added.
- arch/arm/mach-nexell/timer.c: '#include <log.h>' inserted because it has been removed from common.h.
- '#ifdef...' changed to 'if (IS_ENABLED(CONFIG...))' where possible because of appropriate warnings of patman.
Changes in v2:
- arch/arm/mach-nexell/serial.c removed because this is for the UARTs of the S5P6818 SoC which is not supported yet. S5P4418 UARTs are different, here the (existing) PL011-code is used.
- line '... += spl/' in in arch/arm/mach-nexell/Makefile deleted, this change has already been stated in the commit message but was missing nethertheless.
arch/arm/Kconfig | 7 + arch/arm/Makefile | 1 + arch/arm/mach-nexell/Kconfig | 58 +++ arch/arm/mach-nexell/Makefile | 13 + arch/arm/mach-nexell/clock.c | 869 ++++++++++++++++++++++++++++++++++ arch/arm/mach-nexell/cmd_boot_linux.c | 144 ++++++ arch/arm/mach-nexell/config.mk | 11 + arch/arm/mach-nexell/nx_gpio.c | 352 ++++++++++++++ arch/arm/mach-nexell/nx_sec_reg.c | 82 ++++ arch/arm/mach-nexell/reg-call.S | 23 + arch/arm/mach-nexell/reset.c | 33 ++ arch/arm/mach-nexell/tieoff.c | 107 +++++ arch/arm/mach-nexell/timer.c | 299 ++++++++++++ 13 files changed, 1999 insertions(+) create mode 100644 arch/arm/mach-nexell/Kconfig create mode 100644 arch/arm/mach-nexell/Makefile create mode 100644 arch/arm/mach-nexell/clock.c create mode 100644 arch/arm/mach-nexell/cmd_boot_linux.c create mode 100644 arch/arm/mach-nexell/config.mk create mode 100644 arch/arm/mach-nexell/nx_gpio.c create mode 100644 arch/arm/mach-nexell/nx_sec_reg.c create mode 100644 arch/arm/mach-nexell/reg-call.S create mode 100644 arch/arm/mach-nexell/reset.c create mode 100644 arch/arm/mach-nexell/tieoff.c create mode 100644 arch/arm/mach-nexell/timer.c
arch/arm/Kconfig +7 -0
@@ -901,6 +901,11 @@ config ARCH_MX5 select CPU_V7A imply MXC_GPIO +config ARCH_NEXELL + bool "Nexell S5P4418/S5P6818 SoC" + select ENABLE_ARM_SOC_BOOT0_HOOK + select DM + config ARCH_OWL bool "Actions Semi OWL SoCs" select DM
@@ -1858,6 +1863,8 @@ source "arch/arm/cpu/armv8/Kconfig" source "arch/arm/mach-imx/Kconfig" +source "arch/arm/mach-nexell/Kconfig" + source "board/bosch/shc/Kconfig" source "board/bosch/guardian/Kconfig" source "board/CarMediaLab/flea3/Kconfig"
arch/arm/Makefile +1 -0
@@ -65,6 +65,7 @@ machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx machine-$(CONFIG_ARCH_MEDIATEK) += mediatek machine-$(CONFIG_ARCH_MESON) += meson machine-$(CONFIG_ARCH_MVEBU) += mvebu +machine-$(CONFIG_ARCH_NEXELL) += nexell machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 machine-$(CONFIG_ARCH_ORION5X) += orion5x machine-$(CONFIG_ARCH_OWL) += owl
arch/arm/mach-nexell/Kconfig new file +58 -0
58 lines not on this page · raw message
arch/arm/mach-nexell/Makefile new file +13 -0
@@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2016 Nexell +# Hyunseok, Jung <[email protected]> + +obj-y += clock.o +obj-y += timer.o +obj-y += reset.o +obj-y += nx_gpio.o +obj-y += tieoff.o +obj-$(CONFIG_ARCH_S5P4418) += reg-call.o +obj-$(CONFIG_ARCH_S5P4418) += nx_sec_reg.o +obj-$(CONFIG_CMD_BOOTL) += cmd_boot_linux.o
arch/arm/mach-nexell/clock.c new file +869 -0
869 lines not on this page · raw message
arch/arm/mach-nexell/cmd_boot_linux.c new file +144 -0
144 lines not on this page · raw message
arch/arm/mach-nexell/config.mk new file +11 -0
@@ -0,0 +1,11 @@ +# +# (C) Copyright 2016 Nexell +# junghyun kim<[email protected]> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +SOCDIR=CPUDIR/$(VENDOR) +MACHDIR=$(patsubst %,arch/arm/mach-%,$(machine-y)) + +LDPPFLAGS += -DMACHDIR=$(MACHDIR) -DSOCDIR=$(SOCDIR)
arch/arm/mach-nexell/nx_gpio.c new file +352 -0
352 lines not on this page · raw message
arch/arm/mach-nexell/nx_sec_reg.c new file +82 -0
82 lines not on this page · raw message
arch/arm/mach-nexell/reg-call.S new file +23 -0
@@ -0,0 +1,23 @@ +#include <asm-offsets.h> +#include <config.h> +#include <linux/linkage.h> + +#define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF) +#define __opcode_to_mem_arm(x) ___opcode_identity32(x) +#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x) + +#define ___opcode_identity32(x) ((u32)(x)) +#define ___inst_arm(x) .long x +#define __inst_arm(x) ___inst_arm(___asm_opcode_to_mem_arm(x)) + +#define __inst_arm_thumb32(arm_opcode, thumb_opcode) __inst_arm(arm_opcode) + +#define __SMC(imm4) __inst_arm_thumb32( \ + 0xE1600070 | (((imm4) & 0xF) << 0), \ + 0xF7F08000 | (((imm4) & 0xF) << 16) \ +) + +ENTRY(__invoke_nexell_fn_smc) + __SMC(0) + bx lr +ENDPROC(__invoke_nexell_fn_smc)
arch/arm/mach-nexell/reset.c new file +33 -0
@@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* (C) Copyright 2016 Nexell +* Youngbok, Park <[email protected]> +*/ + +/* +*FIXME : Not support device tree & reset control driver. +* will remove after support device tree & reset control driver. +*/ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/nexell.h> +#include <asm/arch/reset.h> + +struct nx_rstcon_registerset { +u32 regrst[(NUMBER_OF_RESET_MODULE_PIN +31 ) >>5 ]; +}; + +static struct nx_rstcon_registerset *nx_rstcon = + (struct nx_rstcon_registerset *)PHY_BASEADDR_RSTCON ; + +void nx_rstcon_setrst (u32 rstindex,enum rstcon status) +{ +u32 regnum, bitpos, curstat; + + regnum = rstindex >>5 ; + curstat = (u32 )readl (&nx_rstcon->regrst[regnum]); + bitpos = rstindex &0x1f ; + curstat &= ~(1UL << bitpos); + curstat |= (status &0x01 ) << bitpos; +writel (curstat, &nx_rstcon->regrst[regnum]); +}
arch/arm/mach-nexell/tieoff.c new file +107 -0
107 lines not on this page · raw message
arch/arm/mach-nexell/timer.c new file +299 -0
299 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v4 2/14 arm: add mach-nexell (all files except header files)
Quoted 15 lines · Stefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- SPL not supported yet --> no spl-directory inarch/arm/mach-nexell. Appropriate line inMakefileremoved.
-clock.c: 'section(".data")' added to declaration of clk_periphs[] andcore_hz.
-Kconfig: Changes to have a structure like in mach-bcm283x/Kconfig, e.g. "config ..." entries moved from otherKconfig.
-timer.c: 'section(".data")' added to declaration of timestamp and lastdec.
-arch/arm/mach-nexell/serial.cremoved because this is for the UARTs of the S5P6818 SoC which is not supported yet. S5P4418 UARTs are different, here the (existing) PL011-code is used.
- '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar).
Quoted 1 line
Signed-off-by Stefan Bosch <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200729/26f127b6/attachment.sig>
PATCH v4 3/14 gpio: add nexell driver
In reply to Stefan BoschChanges in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- livetree API (dev_read_...) is used instead of fdt one (fdt...).
---
(no changes since v3)
Changes in v3:
- Changed to livetree API as proposed by patman:
fdtdec_get_int() --> dev_read_s32_default()
fdt_getprop() --> dev_read_string()
Changes in v2:
- commit "i2c: mmc: add nexell driver (gpio, i2c, mmc, pwm)" splitted into separate commits for gpio, i2c, mmc, pwm.
- cosmetic: line "obj-$(CONFIG_NX_GPIO) += nx_gpio.o" in drivers/gpio/Makefile moved up.
drivers/gpio/Kconfig | 9 ++ drivers/gpio/Makefile | 1 + drivers/gpio/nx_gpio.c | 250 +++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 260 insertions(+) create mode 100644 drivers/gpio/nx_gpio.c
drivers/gpio/Kconfig +9 -0
@@ -438,4 +438,13 @@ config MT7621_GPIO help Say yes here to support MediaTek MT7621 compatible GPIOs. +config NX_GPIO + bool "Nexell GPIO driver" + depends on DM_GPIO + help + Support GPIO access on Nexell SoCs. The GPIOs are arranged into + a number of banks (different for each SoC type) each with 32 GPIOs. + The GPIOs for a device are defined in the device tree with one node + for each bank. + endmenu
drivers/gpio/Makefile +1 -0
@@ -64,4 +64,5 @@ obj-$(CONFIG_$(SPL_)PCF8575_GPIO) += pcf8575_gpio.o obj-$(CONFIG_PM8916_GPIO) += pm8916_gpio.o obj-$(CONFIG_MT7621_GPIO) += mt7621_gpio.o obj-$(CONFIG_MSCC_SGPIO) += mscc_sgpio.o +obj-$(CONFIG_NX_GPIO) += nx_gpio.o obj-$(CONFIG_SIFIVE_GPIO) += sifive-gpio.o
drivers/gpio/nx_gpio.c new file +250 -0
250 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v4 3/14 gpio: add nexell driver
Quoted 4 lines · Stefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- livetree API (dev_read_...) is used instead of fdt one (fdt...).Signed-off-by Stefan Bosch <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200729/c758fb36/attachment.sig>
PATCH v4 4/14 i2c: add nexell driver
In reply to Stefan BoschChanges in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- i2c/nx_i2c.c: Some adaptions mainly because of changes in "struct udevice".
- several Bugfixes in nx_i2c.c.
- the driver has been for s5p6818 only. Code extended appropriately in order s5p4418 is also working.
- "probe_chip" added.
- pinctrl-driver/dt is used instead of configuring the i2c I/O-pins in the i2c-driver.
- '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar).
- livetree API (dev_read_...) is used instead of fdt one (fdt...).
---
Changes in v4:
- cosmetic changes in nx_i2c.c: if-else block simplified, defines used for constant values.
Changes in v3:
- pinctrl-driver/dt is used now instead of configuring the i2c I/O-pins in the i2c-driver.
- drivers/i2c/nx_i2c.c: '#include <log.h>' inserted because it has been removed from common.h.
- '#ifdef...' changed to 'if (IS_ENABLED(CONFIG...))' where possible because of appropriate warnings of patman.
- Changed to livetree API as proposed by patman:
fdtdec_get_int() --> dev_read_s32_default()
Changes in v2:
- commit "i2c: mmc: add nexell driver (gpio, i2c, mmc, pwm)" splitted into separate commits for gpio, i2c, mmc, pwm.
- several Bugfixes in nx_i2c.c.
- the i2c-driver has been for s5p6818 only. Code extended approriately in order s5p4418 is also working.
- "probe_chip" added to the i2c-driver.
- doc/device-tree-bindings/i2c/nx_i2c.txt added.
doc/device-tree-bindings/i2c/nx_i2c.txt | 28 ++ drivers/i2c/Kconfig | 9 + drivers/i2c/Makefile | 1 + drivers/i2c/nx_i2c.c | 626 ++++++++++++++++++++++++++++++++ 4 files changed, 664 insertions(+) create mode 100644 doc/device-tree-bindings/i2c/nx_i2c.txt create mode 100644 drivers/i2c/nx_i2c.c
doc/device-tree-bindings/i2c/nx_i2c.txt new file +28 -0
@@ -0,0 +1,28 @@ +I2C controller embedded in Nexell's/Samsung's SoC S5P4418 and S5P6818 + +Driver: +- drivers/i2c/nx_i2c.c + +Required properties: +- #address-cells = <1>; +- #size-cells = <0>; +- compatible = "nexell,s5pxx18-i2c"; +- reg = <i2c_base 0x100>; + Where i2c_base has to be the base address of the i2c-register set. + I2C0: 0xc00a4000 + I2C1: 0xc00a5000 + I2C2: 0xc00a6000 + +Optional properties: +- clock-frequency: Desired I2C bus frequency in Hz, default value is 100000. +- i2c-sda-delay-ns (S5P6818 only): SDA delay in ns, default value is 0. +- Child nodes conforming to i2c bus binding. + +Example: + i2c0:i2c at c00a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nexell,s5pxx18-i2c"; + reg = <0xc00a4000 0x100>; + clock-frequency = <400000>; + };
drivers/i2c/Kconfig +9 -0
@@ -325,6 +325,15 @@ config SYS_MXC_I2C8_SLAVE MXC I2C8 Slave endif +config SYS_I2C_NEXELL + bool "Nexell I2C driver" + depends on DM_I2C + help + Add support for the Nexell I2C driver. This is used with various + Nexell parts such as S5Pxx18 series SoCs. All chips + have several I2C ports and all are provided, controlled by the + device tree. + config SYS_I2C_OMAP24XX bool "TI OMAP2+ I2C driver" depends on ARCH_OMAP2PLUS || ARCH_K3
drivers/i2c/Makefile +1 -0
@@ -27,6 +27,7 @@ obj-$(CONFIG_SYS_I2C_LPC32XX) += lpc32xx_i2c.o obj-$(CONFIG_SYS_I2C_MESON) += meson_i2c.o obj-$(CONFIG_SYS_I2C_MVTWSI) += mvtwsi.o obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o +obj-$(CONFIG_SYS_I2C_NEXELL) += nx_i2c.o obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o obj-$(CONFIG_SYS_I2C_RCAR_I2C) += rcar_i2c.o obj-$(CONFIG_SYS_I2C_RCAR_IIC) += rcar_iic.o
drivers/i2c/nx_i2c.c new file +626 -0
626 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v4 4/14 i2c: add nexell driver
Quoted 13 lines · Stefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
-i2c/nx_i2c.c: Some adaptions mainly because of changes in "struct udevice".
- several Bugfixes innx_i2c.c.
- the driver has been for s5p6818 only. Code extended appropriately in order s5p4418 is also working.
- "probe_chip" added.
- pinctrl-driver/dt is used instead of configuring the i2c I/O-pins in the i2c-driver.
- '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar).
- livetree API (dev_read_...) is used instead of fdt one (fdt...).
Quoted 1 line
Signed-off-by Stefan Bosch <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200729/810fe968/attachment.sig>
PATCH v4 5/14 mmc: add nexell driver
In reply to Stefan BoschChanges in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- driver changed to DM.
- pinctrl-driver/dt is used now instead of configuring the mmc I/O-pins in the mmc-driver.
- nexell_dwmmc_ofdata_to_platdata() reworked, i.e. valid default values are used now (where possible) and the appropriate if-blocks have been removed.
- new dt-property "mmcboost" is used now instead of "CONFIG_BOOST_MMC" which was not defined anywhere.
---
(no changes since v3)
Changes in v3:
- nexell_dw_mmc_dm.c renamed (back) to nexell_dw_mmc.c
- pinctrl-driver/dt is used now instead of configuring the mmc I/O-pins in the mmc-driver.
- nexell_dwmmc_ofdata_to_platdata() reworked, i.e. valid default values are used now (where possible) and the appropriate if-blocks have been removed.
- "nexell," removed from dt-properties, e.g. "nexell,bus-width" changed to "bus-width".
- new dt-property "mmcboost" is used now instead of "CONFIG_BOOST_MMC" which was not defined anywhere.
- Boot error "Loading Environment from MMC... *** Warning - No block device, using default environment" after updating local repository. Bugfix in drivers/mmc/nexell_dw_mmc.c: "#include <clk.h>" changed to "#include <asm/arch/clk.h>". This Bug showed up now because of the commit "dm: clk: add stub when CONFIG_CLK is deactivated" where include/clk.h has been changed.
- drivers/mmc/nexell_dw_mmc.c: '#include <log.h>' inserted because it has been removed from common.h.
Changes in v2:
- commit "i2c: mmc: add nexell driver (gpio, i2c, mmc, pwm)" splitted into separate commits for gpio, i2c, mmc, pwm.
drivers/mmc/Kconfig | 8 ++ drivers/mmc/Makefile | 1 + drivers/mmc/nexell_dw_mmc.c | 237 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 246 insertions(+) create mode 100644 drivers/mmc/nexell_dw_mmc.c
drivers/mmc/Kconfig +8 -0
@@ -264,6 +264,14 @@ config MMC_DW_SNPS This selects support for Synopsys DesignWare Memory Card Interface driver extensions used in various Synopsys ARC devboards. +config NEXELL_DWMMC + bool "Nexell SD/MMC controller support" + depends on ARCH_NEXELL + depends on MMC_DW + depends on DM_MMC + depends on PINCTRL_NEXELL + default y + config MMC_MESON_GX bool "Meson GX EMMC controller support" depends on DM_MMC && BLK && ARCH_MESON
drivers/mmc/Makefile +1 -0
@@ -44,6 +44,7 @@ obj-$(CONFIG_SH_MMCIF) += sh_mmcif.o obj-$(CONFIG_SH_SDHI) += sh_sdhi.o obj-$(CONFIG_STM32_SDMMC2) += stm32_sdmmc2.o obj-$(CONFIG_JZ47XX_MMC) += jz_mmc.o +obj-$(CONFIG_NEXELL_DWMMC) += nexell_dw_mmc.o # SDHCI obj-$(CONFIG_MMC_SDHCI) += sdhci.o
drivers/mmc/nexell_dw_mmc.c new file +237 -0
237 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v4 5/14 mmc: add nexell driver
Quoted 11 lines · Stefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- driver changed to DM.
- pinctrl-driver/dt is used now instead of configuring the mmc I/O-pins in the mmc-driver.
-nexell_dwmmc_ofdata_to_platdata()reworked, i.e. valid default values are used now (where possible) and the appropriate if-blocks have been removed.
- new dt-property "mmcboost" is used now instead of "CONFIG_BOOST_MMC" which was not defined anywhere.Signed-off-by Stefan Bosch <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200729/1b03a8d6/attachment.sig>
PATCH v4 6/14 pinctrl: add nexell driver
In reply to Stefan BoschChanges in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- livetree API (dev_read_...) is used instead of fdt one (fdt...).
- doc/device-tree-bindings/pinctrl/nexell,s5pxx18-pinctrl.txt added.
---
(no changes since v3)
Changes in v3:
- Kconfig: Missing helps added.
- Changed to livetree API as proposed by patman:
fdt_stringlist_count() --> dev_read_string_count() fdt_stringlist_get() --> dev_read_string_index() fdtdec_get_int() --> dev_read_s32_default()
- doc/device-tree-bindings/pinctrl/nexell,s5pxx18-pinctrl.txt added.
.../pinctrl/nexell,s5pxx18-pinctrl.txt | 78 ++++++++ drivers/pinctrl/Kconfig | 1 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/nexell/Kconfig | 18 ++ drivers/pinctrl/nexell/Makefile | 7 + drivers/pinctrl/nexell/pinctrl-nexell.c | 66 +++++++ drivers/pinctrl/nexell/pinctrl-nexell.h | 68 +++++++ drivers/pinctrl/nexell/pinctrl-s5pxx18.c | 220 +++++++++++++++++++++ drivers/pinctrl/nexell/pinctrl-s5pxx18.h | 53 +++++ 9 files changed, 512 insertions(+) create mode 100644 doc/device-tree-bindings/pinctrl/nexell,s5pxx18-pinctrl.txt create mode 100644 drivers/pinctrl/nexell/Kconfig create mode 100644 drivers/pinctrl/nexell/Makefile create mode 100644 drivers/pinctrl/nexell/pinctrl-nexell.c create mode 100644 drivers/pinctrl/nexell/pinctrl-nexell.h create mode 100644 drivers/pinctrl/nexell/pinctrl-s5pxx18.c create mode 100644 drivers/pinctrl/nexell/pinctrl-s5pxx18.h
doc/device-tree-bindings/pinctrl/nexell,s5pxx18-pinctrl.txt new file +78 -0
@@ -0,0 +1,78 @@ +Binding for Nexell s5pxx18 pin cotroller +======================================== + +Nexell's ARM bases SoC's integrates a GPIO and Pin mux/config hardware +controller. It controls the input/output settings on the available pads/pins +and also provides ability to multiplex and configure the output of various +on-chip controllers onto these pads. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + + +Required properties: + - compatible: "nexell,s5pxx18-pinctrl" + - reg: should be register base and length as documented in the datasheet + - interrupts: interrupt specifier for the controller over gpio and alive pins + +Example: +pinctrl_0: pinctrl at c0010000 { + compatible = "nexell,s5pxx18-pinctrl"; + reg = <0xc0010000 0xf000>; + u-boot,dm-pre-reloc; +}; + +Nexell's pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters. + + Child nodes must be set at least one of the following settings: + - pins = Select pins for using this function. + - pin-function = Select the function for use in a selected pin. + - pin-pull = Pull up/down configuration. + - pin-strength = Drive strength configuration. + + Valid values for nexell,pins are: + "gpioX-N" : X in {A,B,C,D,E}, N in {0-31} + Valid values for nexell,pin-function are: + "N" : N in {0-3}. + This setting means that the value is different for each pin. + Please refer to datasheet. + Valid values for nexell,pin-pull are: + "N" : 0 - Down, 1 - Up, 2 - Off + Valid values for nexell,pin-strength are: + "N" : 0,1,2,3 + + +Example: + - pin settings + mmc0_clk: mmc0-clk { + pins = "gpioa-29"; + pin-function = <1>; + pin-pull = <2>; + pin-strength = <2>; + }; + + mmc0_cmd: mmc0-cmd { + pins = "gpioa-31"; + pin-function = <1>; + pin-pull = <2>; + pin-strength = <1>; + }; + + mmc0_bus4: mmc0-bus-width4 { + pins = "gpiob-1, gpiob-3, gpiob-5, gpiob-7"; + pin-function = <1>; + pin-pull = <2>; + pin-strength = <1>; + }; + + - used by client devices + mmc0:mmc at ... { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_clk>, <&mmc0_cmd>, <&mmc0_bus4>; + ... + };
drivers/pinctrl/Kconfig +1 -0
@@ -294,6 +294,7 @@ source "drivers/pinctrl/meson/Kconfig" source "drivers/pinctrl/mscc/Kconfig" source "drivers/pinctrl/mtmips/Kconfig" source "drivers/pinctrl/mvebu/Kconfig" +source "drivers/pinctrl/nexell/Kconfig" source "drivers/pinctrl/nxp/Kconfig" source "drivers/pinctrl/renesas/Kconfig" source "drivers/pinctrl/rockchip/Kconfig"
drivers/pinctrl/Makefile +1 -0
@@ -21,6 +21,7 @@ obj-$(CONFIG_PINCTRL_MESON) += meson/ obj-$(CONFIG_PINCTRL_MTK) += mediatek/ obj-$(CONFIG_PINCTRL_MSCC) += mscc/ obj-$(CONFIG_ARCH_MVEBU) += mvebu/ +obj-$(CONFIG_ARCH_NEXELL) += nexell/ obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o obj-$(CONFIG_PINCTRL_STI) += pinctrl-sti.o obj-$(CONFIG_PINCTRL_STM32) += pinctrl_stm32.o
drivers/pinctrl/nexell/Kconfig new file +18 -0
@@ -0,0 +1,18 @@ +if ARCH_NEXELL + +config PINCTRL_NEXELL + bool "Nexell pinctrl driver" + help + Support of pin multiplexing and pin configuration for Nexell + SoCs. + +config PINCTRL_NEXELL_S5PXX18 + bool "Nexell s5pxx18 SoC pinctrl driver" + default y if ARCH_S5P4418 || ARCH_S5P6818 + depends on ARCH_NEXELL && PINCTRL_FULL + select PINCTRL_NEXELL + help + Support of pin multiplexing and pin configuration for S5P4418 + and S5P6818 SoC. + +endif
drivers/pinctrl/nexell/Makefile new file +7 -0
@@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2016 Nexell +# Bongyu, KOO <[email protected]> + +obj-$(CONFIG_PINCTRL_NEXELL) += pinctrl-nexell.o +obj-$(CONFIG_PINCTRL_NEXELL_S5PXX18) += pinctrl-s5pxx18.o
drivers/pinctrl/nexell/pinctrl-nexell.c new file +66 -0
66 lines not on this page · raw message
drivers/pinctrl/nexell/pinctrl-nexell.h new file +68 -0
68 lines not on this page · raw message
drivers/pinctrl/nexell/pinctrl-s5pxx18.c new file +220 -0
220 lines not on this page · raw message
drivers/pinctrl/nexell/pinctrl-s5pxx18.h new file +53 -0
53 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v4 6/14 pinctrl: add nexell driver
Quoted 5 lines · Stefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- livetree API (dev_read_...) is used instead of fdt one (fdt...).
-doc/device-tree-bindings/pinctrl/nexell,s5pxx18-pinctrl.txtadded.Signed-off-by Stefan Bosch <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200729/a8543f8a/attachment.sig>
PATCH v4 7/14 pwm: add driver for nexell
In reply to Stefan BoschChanges in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- Since drivers/pwm/pwm-nexell.c is an adapted version of s5p-common/pwm.c an appropriately changed version of s5p-common/pwm.c is used instead. Therefore arch/arm/mach-s5pc1xx/include/mach/pwm.h copied to arch/arm/mach-nexell/include/mach and s5p-common/Makefile changed appropriately.
- '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar).
---
(no changes since v3)
Changes in v3:
- Handling of Configs for LCD backlight control reworked because (among others) not setting CONFIG_S5P4418_ONEWIRE and/or CONFIG_PWM_NX has caused errors when compiling board/friendlyarm/nanopi2/onewire.c.
- pwm.h: () around macro argument x added to avoid precedence issues.
- '#ifdef...' changed to 'if (IS_ENABLED(CONFIG...))' where possible because of appropriate warnings of patman.
Changes in v2:
- commit "i2c: mmc: add nexell driver (gpio, i2c, mmc, pwm)" splitted into separate commits for gpio, i2c, mmc, pwm.
- Since drivers/pwm/pwm-nexell.c is an adapted version of s5p-common/pwm.c an appropriately changed version of s5p-common/pwm.c is used now. Therefore arch/arm/mach-s5pc1xx/include/mach/pwm.h copied to arch/arm/mach-nexell/include/mach and s5p-common/Makefile changed appropriately.
arch/arm/cpu/armv7/s5p-common/Makefile | 13 +++++--- arch/arm/cpu/armv7/s5p-common/pwm.c | 57 ++++++++++++++++++++++++++++++++- arch/arm/mach-nexell/include/mach/pwm.h | 54 +++++++++++++++++++++++++++++++ 3 files changed, 119 insertions(+), 5 deletions(-) create mode 100644 arch/arm/mach-nexell/include/mach/pwm.h
arch/arm/cpu/armv7/s5p-common/Makefile +9 -4
@@ -3,9 +3,14 @@ # Copyright (C) 2009 Samsung Electronics # Minkyu Kang <[email protected]> -obj-y += cpu_info.o +ifdef CONFIG_ARCH_NEXELL +obj-$(CONFIG_PWM_NX) += pwm.o +obj-$(CONFIG_S5P4418_ONEWIRE) += pwm.o +else +obj-y += cpu_info.o ifndef CONFIG_SPL_BUILD -obj-y += timer.o -obj-y += sromc.o -obj-$(CONFIG_PWM) += pwm.o +obj-y += timer.o +obj-y += sromc.o +obj-$(CONFIG_PWM) += pwm.o +endif endif
arch/arm/cpu/armv7/s5p-common/pwm.c +56 -1
112 lines not on this page · raw message
arch/arm/mach-nexell/include/mach/pwm.h new file +54 -0
54 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v4 7/14 pwm: add driver for nexell
Quoted 10 lines · Stefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- Sincedrivers/pwm/pwm-nexell.cis an adapted version ofs5p-common/pwm.can appropriately changed version ofs5p-common/pwm.cis used instead. Thereforearch/arm/mach-s5pc1xx/include/mach/pwm.hcopied toarch/arm/mach-nexell/include/machand s5p-common/Makefile changed appropriately.
- '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar).Signed-off-by Stefan Bosch <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200729/af16f533/attachment.sig>
PATCH v4 8/14 video: add nexell video driver (soc: displaytop)
In reply to Stefan BoschLow level functions for DisplayTop (Display Topology).
---
(no changes since v1)
drivers/video/nexell/soc/s5pxx18_soc_disptop.c | 185 ++++++++++ drivers/video/nexell/soc/s5pxx18_soc_disptop.h | 385 +++++++++++++++++++++ drivers/video/nexell/soc/s5pxx18_soc_disptop_clk.c | 309 +++++++++++++++++ drivers/video/nexell/soc/s5pxx18_soc_disptop_clk.h | 59 ++++ drivers/video/nexell/soc/s5pxx18_soc_disptype.h | 23 ++ 5 files changed, 961 insertions(+) create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_disptop.c create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_disptop.h create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_disptop_clk.c create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_disptop_clk.h create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_disptype.h
drivers/video/nexell/soc/s5pxx18_soc_disptop.c new file +185 -0
@@ -0,0 +1,185 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2016 Nexell Co., Ltd. +* +* Author: junghyun, kim <[email protected]> +*/ + +#include <linux/types.h> +#include <linux/io.h> + +#include "s5pxx18_soc_disptop.h" + +static struct { +struct nx_disp_top_register_set *pregister; +} __g_module_variables = {NULL , }; + +int nx_disp_top_initialize (void ) +{ +static int binit; +u32 i; + +if (binit ==0 ) { +for (i =0 ; i <NUMBER_OF_DISPTOP_MODULE ; i++) + __g_module_variables.pregister =NULL ; + binit =1 ; + } +return 1 ; +} + +u32 nx_disp_top_get_number_of_module (void ) +{ +return NUMBER_OF_DISPTOP_MODULE ; +} + +u32 nx_disp_top_get_physical_address (void ) +{ +static const u32 physical_addr[] =PHY_BASEADDR_DISPTOP_LIST ; + +return (u32)(physical_addr[0 ] +PHY_BASEADDR_DISPLAYTOP_MODULE_OFFSET ); +} + +u32 nx_disp_top_get_size_of_register_set (void ) +{ +return sizeof (struct nx_disp_top_register_set ); +} + +void nx_disp_top_set_base_address (void *base_address) +{ + __g_module_variables.pregister = + (struct nx_disp_top_register_set *)base_address; +} + +void *nx_disp_top_get_base_address (void ) +{ +return (void *)__g_module_variables.pregister; +} + +void nx_disp_top_set_resconvmux (int benb,u32 sel) +{ + registerstruct nx_disp_top_register_set *pregister; +u32 regvalue; + + pregister = __g_module_variables.pregister; + regvalue = (benb <<31 ) | (sel <<0 ); +writel ((u32 )regvalue, &pregister->resconv_mux_ctrl); +} + +void nx_disp_top_set_hdmimux (int benb,u32 sel) +{ + registerstruct nx_disp_top_register_set *pregister; +u32 regvalue; + + pregister = __g_module_variables.pregister; + regvalue = (benb <<31 ) | (sel <<0 ); +writel ((u32 )regvalue, &pregister->interconv_mux_ctrl); +} + +void nx_disp_top_set_mipimux (int benb,u32 sel) +{ + registerstruct nx_disp_top_register_set *pregister; +u32 regvalue; + + pregister = __g_module_variables.pregister; + regvalue = (benb <<31 ) | (sel <<0 ); +writel ((u32 )regvalue, &pregister->mipi_mux_ctrl); +} + +void nx_disp_top_set_lvdsmux (int benb,u32 sel) +{ + registerstruct nx_disp_top_register_set *pregister; +u32 regvalue; + + pregister = __g_module_variables.pregister; + regvalue = (benb <<31 ) | (sel <<0 ); +writel ((u32 )regvalue, &pregister->lvds_mux_ctrl); +} + +void nx_disp_top_set_primary_mux (u32 sel) +{ + registerstruct nx_disp_top_register_set *pregister; + + pregister = __g_module_variables.pregister; +writel ((u32 )sel, &pregister->tftmpu_mux); +} + +void nx_disp_top_hdmi_set_vsync_start (u32 sel) +{ + registerstruct nx_disp_top_register_set *pregister; + + pregister = __g_module_variables.pregister; +writel ((u32 )sel, &pregister->hdmisyncctrl0); +} + +void nx_disp_top_hdmi_set_vsync_hsstart_end (u32 start,u32 end) +{ + registerstruct nx_disp_top_register_set *pregister; + + pregister = __g_module_variables.pregister; +writel ((u32)(end <<16 ) | (start <<0 ), &pregister->hdmisyncctrl3); +} + +void nx_disp_top_hdmi_set_hactive_start (u32 sel) +{ + registerstruct nx_disp_top_register_set *pregister; + + pregister = __g_module_variables.pregister; +writel ((u32 )sel, &pregister->hdmisyncctrl1); +} + +void nx_disp_top_hdmi_set_hactive_end (u32 sel) +{ + registerstruct nx_disp_top_register_set *pregister; + + pregister = __g_module_variables.pregister; +writel ((u32 )sel, &pregister->hdmisyncctrl2); +} + +void nx_disp_top_set_hdmifield (u32 enable,u32 init_val,u32 vsynctoggle, +u32 hsynctoggle,u32 vsyncclr,u32 hsyncclr, +u32 field_use,u32 muxsel) +{ + registerstruct nx_disp_top_register_set *pregister; +u32 regvalue; + + pregister = __g_module_variables.pregister; + regvalue = ((enable &0x01 ) <<0 ) | ((init_val &0x01 ) <<1 ) | + ((vsynctoggle &0x3fff ) <<2 ) | + ((hsynctoggle &0x3fff ) <<17 ); +writel (regvalue, &pregister->hdmifieldctrl); + regvalue = ((field_use &0x01 ) <<31 ) | ((muxsel &0x01 ) <<30 ) | + ((hsyncclr) <<15 ) | ((vsyncclr) <<0 ); +writel (regvalue, &pregister->greg0); +} + +void nx_disp_top_set_padclock (u32 mux_index,u32 padclk_cfg) +{ + registerstruct nx_disp_top_register_set *pregister; +u32 regvalue; + + pregister = __g_module_variables.pregister; + regvalue =readl (&pregister->greg1); +if (padmux_secondary_mlc == mux_index) { + regvalue = regvalue & (~(0x7 <<3 )); + regvalue = regvalue | (padclk_cfg <<3 ); + }else if (padmux_resolution_conv == mux_index) { + regvalue = regvalue & (~(0x7 <<6 )); + regvalue = regvalue | (padclk_cfg <<6 ); + }else { + regvalue = regvalue & (~(0x7 <<0 )); + regvalue = regvalue | (padclk_cfg <<0 ); + } +writel (regvalue, &pregister->greg1); +} + +void nx_disp_top_set_lcdif_enb (int enb) +{ + registerstruct nx_disp_top_register_set *pregister; +u32 regvalue; + + pregister = __g_module_variables.pregister; + regvalue =readl (&pregister->greg1); + regvalue = regvalue & (~(0x1 <<9 )); + regvalue = regvalue | ((enb &0x1 ) <<9 ); +writel (regvalue, &pregister->greg1); +}
drivers/video/nexell/soc/s5pxx18_soc_disptop.h new file +385 -0
385 lines not on this page · raw message
drivers/video/nexell/soc/s5pxx18_soc_disptop_clk.c new file +309 -0
309 lines not on this page · raw message
drivers/video/nexell/soc/s5pxx18_soc_disptop_clk.h new file +59 -0
59 lines not on this page · raw message
drivers/video/nexell/soc/s5pxx18_soc_disptype.h new file +23 -0
@@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0+ +* +* Copyright (C) 2016 Nexell Co., Ltd. +* +* Author: junghyun, kim <[email protected]> +*/ + +#ifndef _S5PXX18_SOC_DISP_TYPE_H_ +#define _S5PXX18_SOC_DISP_TYPE_H_ + +/* clock control types */ +enum nx_pclkmode { + nx_pclkmode_dynamic =0UL , + nx_pclkmode_always =1UL +}; + +enum nx_bclkmode { + nx_bclkmode_disable =0UL , + nx_bclkmode_dynamic =2UL , + nx_bclkmode_always =3UL +}; + +#endif
Signature · 1 line
1.9.1
PATCH v4 8/14 video: add nexell video driver (soc: displaytop)
Quoted 3 lines · Stefan Bosch
Low level functions for DisplayTop (Display Topology).
Signed-off-by Stefan Bosch <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200729/b166354d/attachment.sig>
PATCH v4 9/14 video: add nexell video driver (soc: mlc, mipi)
In reply to Stefan BoschLow level functions for MLC (Multi Layer Control) and MIPI (Mobile Industry Processor Interface).
---
(no changes since v1)
drivers/video/nexell/soc/s5pxx18_soc_mipi.c | 580 +++++++++ drivers/video/nexell/soc/s5pxx18_soc_mipi.h | 291 +++++ drivers/video/nexell/soc/s5pxx18_soc_mlc.c | 1861 +++++++++++++++++++++++++++ drivers/video/nexell/soc/s5pxx18_soc_mlc.h | 429 ++++++ 4 files changed, 3161 insertions(+) create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_mipi.c create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_mipi.h create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_mlc.c create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_mlc.h
drivers/video/nexell/soc/s5pxx18_soc_mipi.c new file +580 -0
@@ -0,0 +1,580 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2016 Nexell Co., Ltd. +* +* Author: junghyun, kim <[email protected]> +*/ + +#include <linux/types.h> +#include <linux/io.h> + +#include "s5pxx18_soc_disptop.h" +#include "s5pxx18_soc_mipi.h" + +static struct nx_mipi_register_set *__g_pregister[NUMBER_OF_MIPI_MODULE ]; + +int nx_mipi_smoke_test (u32 module_index) +{ + registerstruct nx_mipi_register_set *pregister; + + pregister = __g_pregister[module_index]; + +if (pregister->csis_config_ch0 !=0x000000FC ) +return false; + +if (pregister->dsim_intmsk !=0xB337FFFF ) +return false; + +writel (0xDEADC0DE , &pregister->csis_dphyctrl); +writel (0xFFFFFFFF , &pregister->csis_ctrl2); +writel (0xDEADC0DE , &pregister->dsim_msync); + +if (pregister->csis_dphyctrl !=0xDE80001E ) +return false; + +if ((pregister->csis_ctrl2 & (~1 )) !=0xEEE00010 ) +return false; + +if (pregister->dsim_msync !=0xDE80C0DE ) +return false; + +return true; +} + +void nx_mipi_set_base_address (u32 module_index,void *base_address) +{ + __g_pregister[module_index] = + (struct nx_mipi_register_set *)base_address; +} + +void *nx_mipi_get_base_address (u32 module_index) +{ +return (void *)__g_pregister[module_index]; +} + +u32 nx_mipi_get_physical_address (u32 module_index) +{ +const u32 physical_addr[] =PHY_BASEADDR_MIPI_LIST ; + +return physical_addr[module_index]; +} + +#define __nx_mipi_valid_dsi_intmask__ \ + (~((1 << 26) | (1 << 23) | (1 << 22) | (1 << 19))) + +void nx_mipi_set_interrupt_enable (u32 module_index,u32 int_num,int enable) +{ + registerstruct nx_mipi_register_set *pregister; + registeru32 regvalue; + + pregister = __g_pregister[module_index]; +if (int_num <32 ) { + regvalue = pregister->csis_intmsk; + regvalue &= ~(1ul << int_num); + regvalue |= (u32 )enable << int_num; +writel (regvalue, &pregister->csis_intmsk); + }else { + regvalue = pregister->dsim_intmsk; + regvalue &= ~(1ul << (int_num -32 )); + regvalue |= (u32 )enable << (int_num -32 ); +writel (regvalue, &pregister->dsim_intmsk); + } +} + +int nx_mipi_get_interrupt_enable (u32 module_index,u32 int_num) +{ +if (int_num <32 ) +return (int )((__g_pregister[module_index]->csis_intmsk >> + int_num) &0x01 ); +else +return (int )((__g_pregister[module_index]->dsim_intmsk >> + (int_num -32 )) &0x01 ); +} + +int nx_mipi_get_interrupt_pending (u32 module_index,u32 int_num) +{ + registerstruct nx_mipi_register_set *pregister; + registeru32 regvalue; +int ret; + + pregister = __g_pregister[module_index]; +if (int_num <32 ) { + regvalue = pregister->csis_intmsk; + regvalue &= pregister->csis_intsrc; + ret = (int )((regvalue >> int_num) &0x01 ); + }else { + regvalue = pregister->dsim_intmsk; + regvalue &= pregister->dsim_intsrc; + ret = (int )((regvalue >> (int_num -32 )) &0x01 ); + } + +return ret; +} + +void nx_mipi_clear_interrupt_pending (u32 module_index,u32 int_num) +{ + registerstruct nx_mipi_register_set *pregister; + + pregister = __g_pregister[module_index]; +if (int_num <32 ) +writel (1ul << int_num, &pregister->csis_intsrc); +else +writel (1ul << (int_num -32 ), &pregister->dsim_intsrc); +} + +void nx_mipi_set_interrupt_enable_all (u32 module_index,int enable) +{ + registerstruct nx_mipi_register_set *pregister; + + pregister = __g_pregister[module_index]; +if (enable) +writel (__nx_mipi_valid_dsi_intmask__, &pregister->dsim_intmsk); +else +writel (0 , &pregister->dsim_intmsk); +} + +int nx_mipi_get_interrupt_enable_all (u32 module_index) +{ +if (__g_pregister[module_index]->csis_intmsk) +return true; + +if (__g_pregister[module_index]->dsim_intmsk) +return true; + +return false; +} + +int nx_mipi_get_interrupt_pending_all (u32 module_index) +{ + registerstruct nx_mipi_register_set *pregister; + registeru32 regvalue; + + pregister = __g_pregister[module_index]; + regvalue = pregister->csis_intmsk; + regvalue &= pregister->csis_intsrc; + +if (regvalue) +return true; + + regvalue = pregister->dsim_intmsk; + regvalue &= pregister->dsim_intsrc; + +if (regvalue) +return true; + +return false; +} + +void nx_mipi_clear_interrupt_pending_all (u32 module_index) +{ + registerstruct nx_mipi_register_set *pregister; + + pregister = __g_pregister[module_index]; +writel (__nx_mipi_valid_dsi_intmask__, &pregister->dsim_intsrc); +} + +int32_t nx_mipi_get_interrupt_pending_number (u32 module_index) +{ + registerstruct nx_mipi_register_set *pregister; + registeru32 regvalue; +int i; + + pregister = __g_pregister[module_index]; + regvalue = pregister->csis_intmsk; + regvalue &= pregister->csis_intsrc; +if (regvalue !=0 ) { +for (i =0 ; i <32 ; i++) { +if (regvalue &1ul ) +return i; + regvalue >>=1 ; + } + } + + regvalue = pregister->dsim_intmsk; + regvalue &= pregister->dsim_intsrc; +if (regvalue !=0 ) { +for (i =0 ; i <32 ; i++) { +if (regvalue &1ul ) +return i +32 ; + regvalue >>=1 ; + } + } +return -1 ; +} + +#define writereg (regname, mask, value) \ + regvalue = pregister->(regname); \ + regvalue = (regvalue & (~(mask))) | (value); \ + writel(regvalue, &pregister->(regname)) + +void nx_mipi_dsi_get_status (u32 module_index,u32 *pulps,u32 *pstop, +u32 *pispllstable,u32 *pisinreset, +u32 *pisbackward,u32 *pishsclockready) +{ + registerstruct nx_mipi_register_set *pregister; + registeru32 regvalue; + + pregister = __g_pregister[module_index]; + regvalue = pregister->dsim_status; +if (pulps) { + *pulps =0 ; +if (regvalue & (1 <<4 )) + *pulps |= (1 <<0 ); +if (regvalue & (1 <<5 )) + *pulps |= (1 <<1 ); +if (regvalue & (1 <<6 )) + *pulps |= (1 <<2 ); +if (regvalue & (1 <<7 )) + *pulps |= (1 <<3 ); +if (regvalue & (1 <<9 )) + *pulps |= (1 <<4 ); + } + +if (pstop) { + *pstop =0 ; +if (regvalue & (1 <<0 )) + *pstop |= (1 <<0 ); +if (regvalue & (1 <<1 )) + *pstop |= (1 <<1 ); +if (regvalue & (1 <<2 )) + *pstop |= (1 <<2 ); +if (regvalue & (1 <<3 )) + *pstop |= (1 <<3 ); +if (regvalue & (1 <<8 )) + *pstop |= (1 <<4 ); + } + +if (pispllstable) + *pispllstable = (regvalue >>31 ) &1 ; + +if (pisinreset) + *pisinreset = ((regvalue >>20 ) &1 ) ?0 :1 ; + +if (pisbackward) + *pisbackward = (regvalue >>16 ) &1 ; + +if (pishsclockready) + *pishsclockready = (regvalue >>10 ) &1 ; +} + +void nx_mipi_dsi_software_reset (u32 module_index) +{ + registerstruct nx_mipi_register_set *pregister; + + pregister = __g_pregister[module_index]; + +writel (0x00010001 , &pregister->dsim_swrst); + +while (0 != (readl (&pregister->dsim_status) & (1 <<20 ))) + ; + +writel (0x00000000 , &pregister->dsim_swrst); +} + +void nx_mipi_dsi_set_clock (u32 module_index,int enable_txhsclock, +int use_external_clock,int enable_byte_clock, +int enable_escclock_clock_lane, +int enable_escclock_data_lane0, +int enable_escclock_data_lane1, +int enable_escclock_data_lane2, +int enable_escclock_data_lane3, +int enable_escprescaler,u32 escprescalervalue) +{ + registerstruct nx_mipi_register_set *pregister; + registeru32 regvalue; + + pregister = __g_pregister[module_index]; + regvalue =0 ; + regvalue |= (enable_txhsclock <<31 ); + regvalue |= (use_external_clock <<27 ); + regvalue |= (enable_byte_clock <<24 ); + regvalue |= (enable_escclock_clock_lane <<19 ); + regvalue |= (enable_escclock_data_lane0 <<20 ); + regvalue |= (enable_escclock_data_lane1 <<21 ); + regvalue |= (enable_escclock_data_lane2 <<22 ); + regvalue |= (enable_escclock_data_lane3 <<23 ); + regvalue |= (enable_escprescaler <<28 ); + regvalue |= escprescalervalue; + +writel (regvalue, &pregister->dsim_clkctrl); +} + +void nx_mipi_dsi_set_timeout (u32 module_index,u32 bta_tout,u32 lpdrtout) +{ + registerstruct nx_mipi_register_set *pregister; + registeru32 regvalue; + + pregister = __g_pregister[module_index]; + regvalue =0 ; + regvalue |= (bta_tout <<16 ); + regvalue |= (lpdrtout <<0 ); + +writel (regvalue, &pregister->dsim_timeout); +} + +void nx_mipi_dsi_set_config_video_mode (u32 module_index, +int enable_auto_flush_main_display_fifo, +int enable_auto_vertical_count, +int enable_burst, +enum nx_mipi_dsi_syncmode sync_mode, +int enable_eo_tpacket, +int enable_hsync_end_packet, +int enable_hfp,int enable_hbp, +int enable_hsa, +u32 number_of_virtual_channel, +enum nx_mipi_dsi_format format, +u32 number_of_words_in_hfp, +u32 number_of_words_in_hbp, +u32 number_of_words_in_hsync, +u32 number_of_lines_in_vfp, +u32 number_of_lines_in_vbp, +u32 number_of_lines_in_vsync, +u32 number_of_lines_in_command_allow) +{ + registerstruct nx_mipi_register_set *pregister; + registeru32 regvalue; +u32 newvalue; + + pregister = __g_pregister[module_index]; + newvalue = (1 <<25 ); + newvalue |= ((1 - enable_auto_flush_main_display_fifo) <<29 ); + newvalue |= (enable_auto_vertical_count <<24 ); + newvalue |= (enable_burst <<26 ); + newvalue |= (sync_mode <<27 ); + newvalue |= ((1 - enable_eo_tpacket) <<28 ); + newvalue |= (enable_hsync_end_packet <<23 ); + newvalue |= ((1 - enable_hfp) <<22 ); + newvalue |= ((1 - enable_hbp) <<21 ); + newvalue |= ((1 - enable_hsa) <<20 ); + newvalue |= (number_of_virtual_channel <<18 ); + newvalue |= (format <<12 ); + +writereg (dsim_config,0xFFFFFF00 , newvalue); + + newvalue = (number_of_lines_in_command_allow <<28 ); + newvalue |= (number_of_lines_in_vfp <<16 ); + newvalue |= (number_of_lines_in_vbp <<0 ); + +writel (newvalue, &pregister->dsim_mvporch); + + newvalue = (number_of_words_in_hfp <<16 ); + newvalue |= (number_of_words_in_hbp <<0 ); + +writel (newvalue, &pregister->dsim_mhporch); + + newvalue = (number_of_words_in_hsync <<0 ); + newvalue |= (number_of_lines_in_vsync <<22 ); + +writel (newvalue, &pregister->dsim_msync); +} + +void nx_mipi_dsi_set_config_command_mode (u32 module_index, +int + enable_auto_flush_main_display_fifo, +int enable_eo_tpacket, +u32 number_of_virtual_channel, +enum nx_mipi_dsi_format format) +{ + registerstruct nx_mipi_register_set *pregister; + registeru32 regvalue; +u32 newvalue; + + pregister = __g_pregister[module_index]; + newvalue = (0 <<25 ); + newvalue |= (enable_auto_flush_main_display_fifo <<29 ); + newvalue |= (enable_eo_tpacket <<28 ); + newvalue |= (number_of_virtual_channel <<18 ); + newvalue |= (format <<12 ); +writereg (dsim_config,0xFFFFFF00 , newvalue); +} + +void nx_mipi_dsi_set_escape_mode (u32 module_index,u32 stop_state_count, +int force_stop_state,int force_bta, +enum nx_mipi_dsi_lpmode cmdin_lp, +enum nx_mipi_dsi_lpmode txinlp) +{ + registerstruct nx_mipi_register_set *pregister; + registeru32 regvalue; +u32 newvalue; + + pregister = __g_pregister[module_index]; + newvalue = (stop_state_count <<21 ); + newvalue |= (force_stop_state <<20 ); + newvalue |= (force_bta <<16 ); + newvalue |= (cmdin_lp <<7 ); + newvalue |= (txinlp <<6 ); +writereg (dsim_escmode,0xFFFFFFC0 , newvalue); +} + +void nx_mipi_dsi_set_escape_lp (u32 module_index, +enum nx_mipi_dsi_lpmode cmdin_lp, +enum nx_mipi_dsi_lpmode txinlp) +{ + registerstruct nx_mipi_register_set *pregister; + registeru32 regvalue; +u32 newvalue =0 ; + + pregister = __g_pregister[module_index]; + newvalue |= (cmdin_lp <<7 ); + newvalue |= (txinlp <<6 ); +writereg (dsim_escmode,0xC0 , newvalue); +} + +void nx_mipi_dsi_remote_reset_trigger (u32 module_index) +{ + registerstruct nx_mipi_register_set *pregister; + registeru32 regvalue; +u32 newvalue; + + pregister = __g_pregister[module_index]; + newvalue = (1 <<4 ); +writereg (dsim_escmode, (1 <<4 ), newvalue); + +while (readl (&pregister->dsim_escmode) & (1 <<4 )) + ; +} + +void nx_mipi_dsi_set_ulps (u32 module_index,int ulpsclocklane,int ulpsdatalane) +{ + registerstruct nx_mipi_register_set *pregister; + registeru32 regvalue; + + pregister = __g_pregister[module_index]; + regvalue = pregister->dsim_escmode; + +if (ulpsclocklane) { + regvalue &= ~(1 <<0 ); + regvalue |= (1 <<1 ); + }else { + regvalue |= (1 <<0 ); + } + +if (ulpsdatalane) { + regvalue &= ~(1 <<2 ); + regvalue |= (1 <<3 ); + }else { + regvalue |= (1 <<2 ); + } + +writel (regvalue, &pregister->dsim_escmode); + +if (ulpsclocklane) +while ((1 <<9 ) == + (readl (&pregister->dsim_status) & (1 <<9 ))) + ; +else +while (0 != (readl (&pregister->dsim_status) & (1 <<9 ))) + ; + +if (ulpsdatalane) +while ((15 <<4 ) == + (readl (&pregister->dsim_status) & (15 <<4 ))) + ; +else +while (0 != (readl (&pregister->dsim_status) & (15 <<4 ))) + ; + +if (!ulpsclocklane) + regvalue &= (3 <<0 ); + +if (!ulpsdatalane) + regvalue |= (3 <<2 ); + +writel (regvalue, &pregister->dsim_escmode); +} + +void nx_mipi_dsi_set_size (u32 module_index,u32 width,u32 height) +{ + registerstruct nx_mipi_register_set *pregister; + registeru32 regvalue; +u32 newvalue; + + pregister = __g_pregister[module_index]; + newvalue = (height <<16 ); + newvalue |= (width <<0 ); +writereg (dsim_mdresol,0x0FFFFFFF , newvalue); +} + +void nx_mipi_dsi_set_enable (u32 module_index,int enable) +{ + registerstruct nx_mipi_register_set *pregister; + registeru32 regvalue; + + pregister = __g_pregister[module_index]; +writereg (dsim_mdresol, (1 <<31 ), (enable <<31 )); +} + +void nx_mipi_dsi_set_phy (u32 module_index,u32 number_of_data_lanes, +int enable_clock_lane,int enable_data_lane0, +int enable_data_lane1,int enable_data_lane2, +int enable_data_lane3,int swap_clock_lane, +int swap_data_lane) +{ + registerstruct nx_mipi_register_set *pregister; + registeru32 regvalue; +u32 newvalue; + + pregister = __g_pregister[module_index]; + newvalue = (number_of_data_lanes <<5 ); + newvalue |= (enable_clock_lane <<0 ); + newvalue |= (enable_data_lane0 <<1 ); + newvalue |= (enable_data_lane1 <<2 ); + newvalue |= (enable_data_lane2 <<3 ); + newvalue |= (enable_data_lane3 <<4 ); +writereg (dsim_config,0xFF , newvalue); + newvalue = (swap_clock_lane <<1 ); + newvalue |= (swap_data_lane <<0 ); +writereg (dsim_phyacchr1,0x3 , newvalue); +} + +void nx_mipi_dsi_set_pll (u32 module_index,int enable,u32 pllstabletimer, +u32 m_pllpms,u32 m_bandctl,u32 m_dphyctl, +u32 b_dphyctl) +{ + registerstruct nx_mipi_register_set *pregister; + registeru32 regvalue; +u32 newvalue; + + pregister = __g_pregister[module_index]; +if (!enable) { + newvalue = (enable <<23 ); + newvalue |= (m_pllpms <<1 ); + newvalue |= (m_bandctl <<24 ); +writereg (dsim_pllctrl,0x0FFFFFFF , newvalue); + } + +writel (m_dphyctl, &pregister->dsim_phyacchr); +writel (pllstabletimer, &pregister->dsim_plltmr); +writel ((b_dphyctl <<9 ), &pregister->dsim_phyacchr1); + +if (enable) { + newvalue = (enable <<23 ); + newvalue |= (m_pllpms <<1 ); + newvalue |= (m_bandctl <<24 ); +writereg (dsim_pllctrl,0x0FFFFFFF , newvalue); + } +} + +void nx_mipi_dsi_write_pkheader (u32 module_index,u32 data) +{ + registerstruct nx_mipi_register_set *pregister; + + pregister = __g_pregister[module_index]; +writel (data, &pregister->dsim_pkthdr); +} + +void nx_mipi_dsi_write_payload (u32 module_index,u32 data) +{ + registerstruct nx_mipi_register_set *pregister; + + pregister = __g_pregister[module_index]; +writel (data, &pregister->dsim_payload); +} + +u32 nx_mipi_dsi_read_fifo_status (u32 module_index) +{ + registerstruct nx_mipi_register_set *pregister; + + pregister = __g_pregister[module_index]; +return readl (&pregister->dsim_fifoctrl); +}
drivers/video/nexell/soc/s5pxx18_soc_mipi.h new file +291 -0
291 lines not on this page · raw message
drivers/video/nexell/soc/s5pxx18_soc_mlc.c new file +1861 -0
1,861 lines not on this page · raw message
drivers/video/nexell/soc/s5pxx18_soc_mlc.h new file +429 -0
268 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.9.1
Part of the diff is not shown here. View the raw message.
PATCH v4 9/14 video: add nexell video driver (soc: mlc, mipi)
Quoted 4 lines · Stefan Bosch
Low level functions for MLC (Multi Layer Control) and MIPI (Mobile Industry Processor Interface).
Signed-off-by Stefan Bosch <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200729/d8e1c4ff/attachment.sig>
PATCH v4 10/14 video: add nexell video driver (soc: lvds, hdmi)
In reply to Stefan BoschLow level functions for LVDS and HDMI display interfaces.
---
(no changes since v1)
drivers/video/nexell/soc/s5pxx18_soc_hdmi.c | 50 +++ drivers/video/nexell/soc/s5pxx18_soc_hdmi.h | 488 ++++++++++++++++++++++++++++ drivers/video/nexell/soc/s5pxx18_soc_lvds.c | 278 ++++++++++++++++ drivers/video/nexell/soc/s5pxx18_soc_lvds.h | 83 +++++ 4 files changed, 899 insertions(+) create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_hdmi.c create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_hdmi.h create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_lvds.c create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_lvds.h
drivers/video/nexell/soc/s5pxx18_soc_hdmi.c new file +50 -0
@@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2016 Nexell Co., Ltd. +* +* Author: junghyun, kim <[email protected]> +*/ + +#include <linux/types.h> +#include <linux/io.h> + +#include "s5pxx18_soc_hdmi.h" + +static u32 *hdmi_base_addr; + +u32 nx_hdmi_get_reg (u32 module_index,u32 offset) +{ +u32 *reg_addr; +u32 regvalue; + + reg_addr = hdmi_base_addr + (offset /sizeof (u32)); + regvalue =readl ((u32 *)reg_addr); + +return regvalue; +} + +void nx_hdmi_set_reg (u32 module_index,u32 offset,u32 regvalue) +{ +s64 offset_new = (s64)((int32_t )offset); +u32 *reg_addr; + + reg_addr = hdmi_base_addr + (offset_new /sizeof (u32)); +writel (regvalue, (u32 *)reg_addr); +} + +void nx_hdmi_set_base_address (u32 module_index,void *base_address) +{ + hdmi_base_addr = (u32 *)base_address; +} + +void *nx_hdmi_get_base_address (u32 module_index) +{ +return (u32 *)hdmi_base_addr; +} + +u32 nx_hdmi_get_physical_address (u32 module_index) +{ +const u32 physical_addr[] =PHY_BASEADDR_HDMI_LIST ; + +return physical_addr[module_index]; +}
drivers/video/nexell/soc/s5pxx18_soc_hdmi.h new file +488 -0
488 lines not on this page · raw message
drivers/video/nexell/soc/s5pxx18_soc_lvds.c new file +278 -0
278 lines not on this page · raw message
drivers/video/nexell/soc/s5pxx18_soc_lvds.h new file +83 -0
83 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v4 10/14 video: add nexell video driver (soc: lvds, hdmi)
Quoted 3 lines · Stefan Bosch
Low level functions for LVDS and HDMI display interfaces.
Signed-off-by Stefan Bosch <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200729/3ed86fc0/attachment.sig>
PATCH v4 11/14 video: add nexell video driver (soc: dpc, makefile)
In reply to Stefan BoschLow level functions for DPC (Display Controller) and Makefile for all nexell video low level functions.
---
(no changes since v1)
drivers/video/nexell/soc/Makefile | 11 + drivers/video/nexell/soc/s5pxx18_soc_dpc.c | 1569 ++++++++++++++++++++++++++++ drivers/video/nexell/soc/s5pxx18_soc_dpc.h | 444 ++++++++ 3 files changed, 2024 insertions(+) create mode 100644 drivers/video/nexell/soc/Makefile create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_dpc.c create mode 100644 drivers/video/nexell/soc/s5pxx18_soc_dpc.h
drivers/video/nexell/soc/Makefile new file +11 -0
@@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2016 Nexell +# Junghyun, kim<[email protected]> + +obj-$(CONFIG_VIDEO_NX) += s5pxx18_soc_dpc.o s5pxx18_soc_mlc.o \ + s5pxx18_soc_disptop.o s5pxx18_soc_disptop_clk.o + +obj-$(CONFIG_VIDEO_NX_LVDS) += s5pxx18_soc_lvds.o +obj-$(CONFIG_VIDEO_NX_MIPI) += s5pxx18_soc_mipi.o +obj-$(CONFIG_VIDEO_NX_HDMI) += s5pxx18_soc_hdmi.o
drivers/video/nexell/soc/s5pxx18_soc_dpc.c new file +1569 -0
1,569 lines not on this page · raw message
drivers/video/nexell/soc/s5pxx18_soc_dpc.h new file +444 -0
444 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v4 11/14 video: add nexell video driver (soc: dpc, makefile)
Quoted 4 lines · Stefan Bosch
Low level functions for DPC (Display Controller) and
Makefilefor all nexell video low level functions.Signed-off-by Stefan Bosch <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200729/f4a95a02/attachment.sig>
PATCH v4 12/14 video: add nexell video driver (display/video driver)
In reply to Stefan BoschChanges in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- nexell_display.c: Changed to DM, CONFIG_FB_ADDR can not be used anymore because framebuffer is allocated by video_reserve() in video-uclass.c. Therefore code changed appropriately.
- '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar).
- livetree API (dev_read_...) is used instead of fdt one (fdt...).
---
(no changes since v3)
Changes in v3:
- drivers/video/nexell/s5pxx18_dp_hdmi.c: '#include <log.h>' and '#include <linux/delay.h>' inserted because it has been removed from common.h.
- drivers/video/nexell_display.c: '#include <command.h>' inserted because '#include <image.h>' (includes command.h) has been removed from common.h.
- '#ifdef...' changed to 'if (IS_ENABLED(CONFIG...))' where possible because of appropriate warnings of patman.
- Changed to livetree API as proposed by patman:
fdtdec_get_int() --> ofnode_read_s32_default()
for (node = ...) --> ofnode_for_each_subnode()
fdt_get_name() --> ofnode_get_name()
fdt_getprop() --> dev_read_string()
- nx_display_probe() removed, nx_display_dev_probe_uclass() renamed to nx_display_probe().
drivers/video/Kconfig | 10 + drivers/video/Makefile | 1 + drivers/video/nexell/Kconfig | 27 ++ drivers/video/nexell/Makefile | 12 + drivers/video/nexell/s5pxx18_dp.c | 341 +++++++++++++++++ drivers/video/nexell/s5pxx18_dp_hdmi.c | 545 ++++++++++++++++++++++++++ drivers/video/nexell/s5pxx18_dp_lvds.c | 274 +++++++++++++ drivers/video/nexell/s5pxx18_dp_mipi.c | 677 +++++++++++++++++++++++++++++++++ drivers/video/nexell/s5pxx18_dp_rgb.c | 69 ++++ drivers/video/nexell_display.c | 651 +++++++++++++++++++++++++++++++ 10 files changed, 2607 insertions(+) create mode 100644 drivers/video/nexell/Kconfig create mode 100644 drivers/video/nexell/Makefile create mode 100644 drivers/video/nexell/s5pxx18_dp.c create mode 100644 drivers/video/nexell/s5pxx18_dp_hdmi.c create mode 100644 drivers/video/nexell/s5pxx18_dp_lvds.c create mode 100644 drivers/video/nexell/s5pxx18_dp_mipi.c create mode 100644 drivers/video/nexell/s5pxx18_dp_rgb.c create mode 100644 drivers/video/nexell_display.c
drivers/video/Kconfig +10 -0
@@ -572,6 +572,16 @@ source "drivers/video/bridge/Kconfig" source "drivers/video/imx/Kconfig" +config VIDEO_NX + bool "Enable video support on Nexell SoC" + depends on ARCH_S5P6818 || ARCH_S5P4418 + help + Nexell SoC supports many video output options including eDP and + HDMI. This option enables this support which can be used on devices + which have an eDP display connected. + +source "drivers/video/nexell/Kconfig" + config VIDEO bool "Enable legacy video support" depends on !DM_VIDEO
drivers/video/Makefile +1 -0
@@ -61,6 +61,7 @@ obj-${CONFIG_VIDEO_MIPI_DSI} += mipi_dsi.o obj-$(CONFIG_VIDEO_MVEBU) += mvebu_lcd.o obj-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o obj-$(CONFIG_VIDEO_MXS) += mxsfb.o videomodes.o +obj-$(CONFIG_VIDEO_NX) += nexell_display.o videomodes.o nexell/ obj-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o obj-$(CONFIG_VIDEO_DSI_HOST_SANDBOX) += sandbox_dsi_host.o obj-$(CONFIG_VIDEO_SANDBOX_SDL) += sandbox_sdl.o
drivers/video/nexell/Kconfig new file +27 -0
@@ -0,0 +1,27 @@ +if VIDEO_NX + +menu "LCD select" + +config VIDEO_NX_RGB + bool "RGB LCD" + help + Support for RGB lcd output. + +config VIDEO_NX_LVDS + bool "LVDS LCD" + help + Support for LVDS lcd output. + +config VIDEO_NX_MIPI + bool "MiPi" + help + Support for MiPi lcd output. + +config VIDEO_NX_HDMI + bool "HDMI" + help + Support for hdmi output. + +endmenu + +endif
drivers/video/nexell/Makefile new file +12 -0
@@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2016 Nexell +# Junghyun, kim<[email protected]> + +obj-$(CONFIG_VIDEO_NX) += s5pxx18_dp.o +obj-$(CONFIG_VIDEO_NX) += soc/ + +obj-$(CONFIG_VIDEO_NX_RGB) += s5pxx18_dp_rgb.o +obj-$(CONFIG_VIDEO_NX_LVDS) += s5pxx18_dp_lvds.o +obj-$(CONFIG_VIDEO_NX_MIPI) += s5pxx18_dp_mipi.o +obj-$(CONFIG_VIDEO_NX_HDMI) += s5pxx18_dp_hdmi.o
drivers/video/nexell/s5pxx18_dp.c new file +341 -0
341 lines not on this page · raw message
drivers/video/nexell/s5pxx18_dp_hdmi.c new file +545 -0
545 lines not on this page · raw message
drivers/video/nexell/s5pxx18_dp_lvds.c new file +274 -0
274 lines not on this page · raw message
drivers/video/nexell/s5pxx18_dp_mipi.c new file +677 -0
677 lines not on this page · raw message
drivers/video/nexell/s5pxx18_dp_rgb.c new file +69 -0
69 lines not on this page · raw message
drivers/video/nexell_display.c new file +651 -0
651 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v4 12/14 video: add nexell video driver (display/video driver)
Quoted 9 lines · Stefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
-nexell_display.c: Changed to DM,CONFIG_FB_ADDRcan not be used anymore because framebuffer is allocated byvideo_reserve()invideo-uclass.c. Therefore code changed appropriately.
- '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar).
- livetree API (dev_read_...) is used instead of fdt one (fdt...).Signed-off-by Stefan Bosch <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200729/eb8c4362/attachment.sig>
PATCH v4 13/14 arm: add support for SoC s5p4418 (cpu) / nanopi2 board
In reply to Stefan BoschChanges in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- SPL not supported yet --> no spl-dir in arch/arm/cpu/armv7/s5p4418/. Appropriate line in Makefile removed.
- cpu.c: '#include <cpu_func.h>' added.
- arch/arm/cpu/armv7/s5p4418/u-boot.lds removed, is not required anylonger.
- "obj-$(CONFIG_ARCH_NEXELL) += s5p-common/" added to arch/arm/cpu/armv7/Makefile since s5p-common/pwm.c is used instead of drivers/pwm/pwm-nexell.c.
- s5p4418.dtsi: '#include "../../../include/generated/autoconf.h"' removed, is not necessary, error at out-of-tree building. '#ifdef CONFIG_CPU_NXP4330'-blocks (2x) removed. Some minor changes regarding mmc. 'u-boot,dm-pre-reloc' added to dp0 because of added DM_VIDEO support.
- board/s5p4418/ renamed to board/friendlyarm/
- All s5p4418-boards except nanopi2 removed because there is no possibility to test the other boards.
- Kconfig: Changes to have a structure like mach-bcm283x (RaspberryPi), e.g. "config ..." entries moved from/to other Kconfig.
- "CONFIG_" removed from several s5p4418/nanopi2 specific defines because the appropriate values do not need to be configurable.
- nanopi2/board.c: All getenv(), getenv_ulong(), setenv() and saveenv() renamed to env_get(), env_get_ulong(), env_set() and env_save(), respectively. MACH_TYPE_S5P4418 is not defined anymore, therefore appropriate code removed (not necessary for DT-kernels).
- nanopi2/onewire.c: All crc8() renamed to crc8_ow() because crc8() is already defined in lib/crc8.c (with different parameters).
- dts: "nexell,s5pxx18-i2c" used instead of "i2c-gpio", i2c0 and i2c1 added. gmac-, ehci- and dwc2otg-entries removed because the appropriate functionality is not supported yet. New mmc-property "mmcboost" added.
s5p4418-pinctrl.dtsi: gmac-entries removed, mmc- and i2c-entries added.
- '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar).
---
(no changes since v3)
Changes in v3:
- dts: pinctrl is supported now, therefore s5p4418-pinctrl.dtsi added, mmc- and i2c-entries extended appropriately. New mmc-property "mmcboost" added.
- Handling of Configs for LCD backlight control reworked because (among others) not setting CONFIG_S5P4418_ONEWIRE and/or CONFIG_PWM_NX has caused errors when compiling board/friendlyarm/nanopi2/onewire.c.
- arch/arm/cpu/armv7/s5p4418/cpu.c: '#include <linux/delay.h>' inserted because it has been removed from common.h.
- board/friendlyarm/nanopi2/board.c: Several includes inserted because some includes have been removed from common.h.
- '#ifdef...' changed to 'if (IS_ENABLED(CONFIG...))' where possible because of appropriate warnings of patman.
- Several initialisations of static variables to 0 removed because of appropriate errors of patman.
Changes in v2:
- i2c: "nexell,s5pxx18-i2c"-driver is used now instead of "i2c-gpio". i2c0 and i2c1 added. I.e. dts files changed appropriately.
- dts: gmac-, ehci- and dwc2otg-entries removed because the appropriate functionality is not supported yet.
- s5p4418-pinctrl.dtsi removed because there is no pinctrl-driver available.
- "obj-$(CONFIG_ARCH_NEXELL) += s5p-common/" added to arch/arm/cpu/armv7/Makefile since s5p-common/pwm.c is used now instead of drivers/pwm/pwm-nexell.c.
- cosmetic: additional GPL license text removed, SPDX-License-Identifier is enough. Furthermore file path removed (two files).
arch/arm/cpu/armv7/Makefile | 2 + arch/arm/cpu/armv7/s5p4418/Makefile | 6 + arch/arm/cpu/armv7/s5p4418/cpu.c | 121 ++++++ arch/arm/dts/Makefile | 3 + arch/arm/dts/s5p4418-nanopi2.dts | 110 ++++++ arch/arm/dts/s5p4418-pinctrl.dtsi | 135 +++++++ arch/arm/dts/s5p4418.dtsi | 170 +++++++++ board/friendlyarm/Kconfig | 37 ++ board/friendlyarm/nanopi2/Kconfig | 12 + board/friendlyarm/nanopi2/MAINTAINERS | 7 + board/friendlyarm/nanopi2/Makefile | 7 + board/friendlyarm/nanopi2/board.c | 575 ++++++++++++++++++++++++++++ board/friendlyarm/nanopi2/hwrev.c | 108 ++++++ board/friendlyarm/nanopi2/hwrev.h | 15 + board/friendlyarm/nanopi2/lcds.c | 697 ++++++++++++++++++++++++++++++++++ board/friendlyarm/nanopi2/nxp-fb.h | 94 +++++ board/friendlyarm/nanopi2/onewire.c | 307 +++++++++++++++ board/friendlyarm/nanopi2/onewire.h | 15 + 18 files changed, 2421 insertions(+) create mode 100644 arch/arm/cpu/armv7/s5p4418/Makefile create mode 100644 arch/arm/cpu/armv7/s5p4418/cpu.c create mode 100644 arch/arm/dts/s5p4418-nanopi2.dts create mode 100644 arch/arm/dts/s5p4418-pinctrl.dtsi create mode 100644 arch/arm/dts/s5p4418.dtsi create mode 100644 board/friendlyarm/Kconfig create mode 100644 board/friendlyarm/nanopi2/Kconfig create mode 100644 board/friendlyarm/nanopi2/MAINTAINERS create mode 100644 board/friendlyarm/nanopi2/Makefile create mode 100644 board/friendlyarm/nanopi2/board.c create mode 100644 board/friendlyarm/nanopi2/hwrev.c create mode 100644 board/friendlyarm/nanopi2/hwrev.h create mode 100644 board/friendlyarm/nanopi2/lcds.c create mode 100644 board/friendlyarm/nanopi2/nxp-fb.h create mode 100644 board/friendlyarm/nanopi2/onewire.c create mode 100644 board/friendlyarm/nanopi2/onewire.h
arch/arm/cpu/armv7/Makefile +2 -0
@@ -42,3 +42,5 @@ obj-$(CONFIG_RMOBILE) += rmobile/ obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/ obj-$(CONFIG_ARCH_SUNXI) += sunxi/ obj-$(CONFIG_VF610) += vf610/ +obj-$(CONFIG_ARCH_S5P4418) += s5p4418/ +obj-$(CONFIG_ARCH_NEXELL) += s5p-common/
arch/arm/cpu/armv7/s5p4418/Makefile new file +6 -0
@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2016 Nexell +# Hyunseok, Jung <[email protected]> + +obj-y += cpu.o
arch/arm/cpu/armv7/s5p4418/cpu.c new file +121 -0
121 lines not on this page · raw message
arch/arm/dts/Makefile +3 -0
@@ -142,6 +142,9 @@ dtb-$(CONFIG_ROCKCHIP_RV1108) += \ rv1108-elgin-r1.dtb \ rv1108-evb.dtb +dtb-$(CONFIG_ARCH_S5P4418) += \ + s5p4418-nanopi2.dtb + dtb-$(CONFIG_ARCH_MESON) += \ meson-gxbb-nanopi-k2.dtb \ meson-gxbb-odroidc2.dtb \
arch/arm/dts/s5p4418-nanopi2.dts new file +110 -0
110 lines not on this page · raw message
arch/arm/dts/s5p4418-pinctrl.dtsi new file +135 -0
135 lines not on this page · raw message
arch/arm/dts/s5p4418.dtsi new file +170 -0
170 lines not on this page · raw message
board/friendlyarm/Kconfig new file +37 -0
@@ -0,0 +1,37 @@ +choice + prompt "LCD backlight control" + optional + default S5P4418_ONEWIRE + +config S5P4418_ONEWIRE + bool "I2C / 1-Wire" + help + This enables LCD-Backlight control for FriendlyARM LCD-panels. + I2C is used if available, otherwise 1-Wire is used. + +config PWM_NX + bool "PWM" + help + This enables LCD-Backlight control via PWM. +endchoice + +config ROOT_DEV + int "ROOT_DEV" + help + Environment variable rootdev is set to this value if env. var. firstboot + does not exist. Otherwise rootdev is set to the MMC boot device. rootdev + determines (together with env. var. bootpart) where the OS (linux) is + booted from. + +config BOOT_PART + int "BOOT_PART" + help + Environment variable bootpart is set to this value. bootpart determines + (together with env. var. rootdev) where the OS (linux) is booted from. + +config ROOT_PART + int "ROOT_PART" + help + Environment variable rootpart is set to this value. + +source "board/friendlyarm/nanopi2/Kconfig"
board/friendlyarm/nanopi2/Kconfig new file +12 -0
@@ -0,0 +1,12 @@ +if TARGET_NANOPI2 + +config SYS_BOARD + default "nanopi2" + +config SYS_VENDOR + default "friendlyarm" + +config SYS_CONFIG_NAME + default "s5p4418_nanopi2" + +endif
board/friendlyarm/nanopi2/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +NANOPI2 BOARD +NANOPC-T2 BOARD +M: Stefan Bosch <[email protected]> +S: Maintained +F: board/s5p4418/nanopi2/ +F: include/configs/s5p4418_nanopi2.h +F: configs/s5p4418_nanopi2_defconfig
board/friendlyarm/nanopi2/Makefile new file +7 -0
@@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2016 Nexell +# Hyunseok, Jung <[email protected]> + +obj-y := board.o hwrev.o lcds.o +obj-$(CONFIG_S5P4418_ONEWIRE) += onewire.o
board/friendlyarm/nanopi2/board.c new file +575 -0
575 lines not on this page · raw message
board/friendlyarm/nanopi2/hwrev.c new file +108 -0
108 lines not on this page · raw message
board/friendlyarm/nanopi2/hwrev.h new file +15 -0
@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ +* +* Copyright (C) Guangzhou FriendlyARM Computer Tech. Co., Ltd. +* (http://www.friendlyarm.com) +*/ + +#ifndef __BD_HW_REV_H__ +#define __BD_HW_REV_H__ + +extern void bd_hwrev_init (void ); +extern void bd_base_rev_init (void ); +extern u32 get_board_rev (void ); +extern const char *get_board_name (void ); + +#endif /* __BD_HW_REV_H__ */
board/friendlyarm/nanopi2/lcds.c new file +697 -0
697 lines not on this page · raw message
board/friendlyarm/nanopi2/nxp-fb.h new file +94 -0
94 lines not on this page · raw message
board/friendlyarm/nanopi2/onewire.c new file +307 -0
307 lines not on this page · raw message
board/friendlyarm/nanopi2/onewire.h new file +15 -0
@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ +* +* Copyright (C) Guangzhou FriendlyARM Computer Tech. Co., Ltd. +* (http://www.friendlyarm.com) +*/ + +#ifndef __ONE_WIRE_H__ +#define __ONE_WIRE_H__ + +extern void onewire_init (void ); +extern int onewire_get_info (unsigned char *lcd,unsigned short *fw_ver); +extern int onewire_get_lcd_id (void ); +extern int onewire_set_backlight (int brightness); + +#endif /* __ONE_WIRE_H__ */
Signature · 1 line
1.9.1
PATCH v4 13/14 arm: add support for SoC s5p4418 (cpu) / nanopi2 board
Quoted 36 lines · Stefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- SPL not supported yet --> no spl-dir inarch/arm/cpu/armv7/s5p4418/. Appropriate line inMakefileremoved.
-cpu.c: '#include <cpu_func.h>' added.
-arch/arm/cpu/armv7/s5p4418/u-boot.ldsremoved, is not required anylonger.
- "obj-$(CONFIG_ARCH_NEXELL) += s5p-common/" added toarch/arm/cpu/armv7/Makefilesinces5p-common/pwm.cis used instead ofdrivers/pwm/pwm-nexell.c.
-s5p4418.dtsi: '#include "../../../include/generated/autoconf.h"' removed, is not necessary, error at out-of-tree building. '#ifdef CONFIG_CPU_NXP4330'-blocks (2x) removed. Some minor changes regarding mmc. 'u-boot,dm-pre-reloc' added to dp0 because of addedDM_VIDEOsupport.
- board/s5p4418/ renamed to board/friendlyarm/
- All s5p4418-boards except nanopi2 removed because there is no possibility to test the other boards.
-Kconfig: Changes to have a structure like mach-bcm283x (RaspberryPi), e.g. "config ..." entries moved from/to otherKconfig.
- "CONFIG_" removed from several s5p4418/nanopi2 specific defines because the appropriate values do not need to be configurable.
-nanopi2/board.c: Allgetenv(),getenv_ulong(),setenv()andsaveenv()renamed toenv_get(),env_get_ulong(),env_set()andenv_save(), respectively.MACH_TYPE_S5P4418is not defined anymore, therefore appropriate code removed (not necessary for DT-kernels).
-nanopi2/onewire.c: Allcrc8()renamed tocrc8_ow()becausecrc8()is already defined inlib/crc8.c(with different parameters).
- dts: "nexell,s5pxx18-i2c" used instead of "i2c-gpio", i2c0 and i2c1 added. gmac-, ehci- and dwc2otg-entries removed because the appropriate functionality is not supported yet. New mmc-property "mmcboost" added.
s5p4418-pinctrl.dtsi: gmac-entries removed, mmc- and i2c-entries added.
- '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar).
Quoted 1 line
Signed-off-by Stefan Bosch <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200729/e7e774b8/attachment.sig>
PATCH v4 14/14 arm: add (default) config for nanopi2 board
In reply to Stefan BoschChanges in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- Configuration changed, mainly several "CONFIG_..." moved from s5p4418_nanopi2.h to s5p4418_nanopi2_defconfig and USB related configs removed because USB is not supported yet.
- s5p4418_nanopi2.h: "CONFIG_" removed from several s5p4418/nanopi2 specific defines because the appropriate values do not need to be configurable.
- pinctrl is supported now, therefore "CONFIG_PINCTRL=y" added to s5p4418_nanopi2_defconfig.
---
(no changes since v3)
Changes in v3:
- CONFIG_SYS_RESERVE_MEM_SIZE removed, has not been used anymore
- s5p4418_nanopi2_defconfig: "CONFIG_PINCTRL=y" added because pinctrl is supported now. "CONFIG_EFI_LOADER=n" removed (there have been boot errors "efi_runtime_relocate: Unknown relocation type 0" at a previous U-Boot Version without this). "CONFIG_DM_I2C_GPIO=y" removed because I2C-peripherial is used (Nexell I2C driver). Some configs moved down for cosmetic reason.
- Handling of Configs for LCD backlight control reworked because (among others) not setting CONFIG_S5P4418_ONEWIRE and/or CONFIG_PWM_NX has caused errors when compiling board/friendlyarm/nanopi2/onewire.c.
- CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END, CONFIG_CMDLINE_TAG and CONFIG_CMD_BMP moved from s5p4418_nanopi2.h to s5p4418_nanopi2_defconfig.
- "#undef CONFIG_CMD_IMLS" removed in s5p4418_nanopi2.h
Changes in v2:
- USB related configs removed because USB is not supported yet.
- CONFIG_CMD_MEMTEST moved from s5p4418_nanopi2.h to s5p4418_nanopi2_defconfig.
- MAINTAINERS: "F: drivers/pwm/pwm-nexell*" deleted because arch/arm/cpu/armv7/s5p-common/pwm.c is used now. Furthermore double line "F: drivers/video/nexell/" deleted.
MAINTAINERS | 17 +++ configs/s5p4418_nanopi2_defconfig | 147 ++++++++++++++++++++++ doc/README.s5p4418 | 63 ++++++++++ include/configs/s5p4418_nanopi2.h | 257 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 484 insertions(+) create mode 100644 configs/s5p4418_nanopi2_defconfig create mode 100644 doc/README.s5p4418 create mode 100644 include/configs/s5p4418_nanopi2.h
MAINTAINERS +17 -0
@@ -270,6 +270,23 @@ F: arch/arm/mach-at91/ F: board/atmel/ F: drivers/misc/microchip_flexcom.c +ARM NEXELL S5P4418 +M: Stefan Bosch <[email protected]> +S: Maintained +F: arch/arm/cpu/armv7/s5p4418/ +F: arch/arm/dts/s5p4418* +F: arch/arm/mach-nexell/ +F: board/friendlyarm/ +F: configs/s5p4418_nanopi2_defconfig +F: doc/README.s5p4418 +F: drivers/gpio/nx_gpio.c +F: drivers/i2c/nx_i2c.c +F: drivers/mmc/nexell_dw_mmc_dm.c +F: drivers/pinctrl/nexell/ +F: drivers/video/nexell/ +F: drivers/video/nexell_display.c +F: include/configs/s5p4418_nanopi2.h + ARM OWL M: Manivannan Sadhasivam <[email protected]> S: Maintained
configs/s5p4418_nanopi2_defconfig new file +147 -0
147 lines not on this page · raw message
doc/README.s5p4418 new file +63 -0
63 lines not on this page · raw message
include/configs/s5p4418_nanopi2.h new file +257 -0
257 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v4 14/14 arm: add (default) config for nanopi2 board
Quoted 11 lines · Stefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- Configuration changed, mainly several "CONFIG_..." moved froms5p4418_nanopi2.htos5p4418_nanopi2_defconfigand USB related configs removed because USB is not supported yet.
-s5p4418_nanopi2.h: "CONFIG_" removed from several s5p4418/nanopi2 specific defines because the appropriate values do not need to be configurable.
- pinctrl is supported now, therefore "CONFIG_PINCTRL=y" added tos5p4418_nanopi2_defconfig.
Quoted 1 line
Signed-off-by Stefan Bosch <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200729/d705c055/attachment.sig>