Skip to contentSkip to conversation

Bluetooth: hci_qca: Bug fixes for SSR

PATCH In review Venkata Lakshmi Narayana Gubba 2 participants 2 messages Jul 11, 2020 – Jul 13, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Bluetooth: hci_qca: Bug fixes for SSR

1.During SSR for command time out if BT SoC goes to inresponsive state, power cycling of BT SoC was not happening.Given the fix by sending hw error event to reset the BT SoC.

2.If SSR is triggered then ignore the transmit data requests to BT SoC until SSR is completed.

---
 drivers/bluetooth/hci_qca.c | 40 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 36 insertions(+), 4 deletions(-)
drivers/bluetooth/hci_qca.c +36 -4
index 7e39546..bfebefa 100644
@@ -72,7 +72,8 @@ enum qca_flags {
 	QCA_DROP_VENDOR_EVENT,
 	QCA_SUSPENDING,
 	QCA_MEMDUMP_COLLECTION,
-	QCA_HW_ERROR_EVENT
+	QCA_HW_ERROR_EVENT,
+	QCA_SSR_TRIGGERED
 };
 
 enum qca_capabilities {
@@ -854,6 +855,13 @@ static int qca_enqueue(struct hci_uart *hu, struct sk_buff *skb)
 	BT_DBG("hu %p qca enq skb %p tx_ibs_state %d", hu, skb,
 	       qca->tx_ibs_state);
 
+	if (test_bit(QCA_SSR_TRIGGERED, &qca->flags)) {
+		/* As SSR is in progress,Ignore the packets */
+		bt_dev_dbg(hu->hdev, "SSR is in progress");
+		kfree_skb(skb);
+		return 0;
+	}
+
 	/* Prepend skb with frame type */
 	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
 
@@ -1123,6 +1131,7 @@ static int qca_controller_memdump_event(struct hci_dev *hdev,
 	struct hci_uart *hu = hci_get_drvdata(hdev);
 	struct qca_data *qca = hu->priv;
 
+	set_bit(QCA_SSR_TRIGGERED, &qca->flags);
 	skb_queue_tail(&qca->rx_memdump_q, skb);
 	queue_work(qca->workqueue, &qca->ctrl_memdump_evt);
 
@@ -1481,6 +1490,7 @@ static void qca_hw_error(struct hci_dev *hdev, u8 code)
 	struct hci_uart *hu = hci_get_drvdata(hdev);
 	struct qca_data *qca = hu->priv;
 
+	set_bit(QCA_SSR_TRIGGERED, &qca->flags);
 	set_bit(QCA_HW_ERROR_EVENT, &qca->flags);
 	bt_dev_info(hdev, "mem_dump_status: %d", qca->memdump_state);
 
@@ -1529,10 +1539,30 @@ static void qca_cmd_timeout(struct hci_dev *hdev)
 	struct hci_uart *hu = hci_get_drvdata(hdev);
 	struct qca_data *qca = hu->priv;
 
-	if (qca->memdump_state == QCA_MEMDUMP_IDLE)
+	set_bit(QCA_SSR_TRIGGERED, &qca->flags);
+	if (qca->memdump_state == QCA_MEMDUMP_IDLE) {
+		set_bit(QCA_MEMDUMP_COLLECTION, &qca->flags);
 		qca_send_crashbuffer(hu);
-	else
-		bt_dev_info(hdev, "Dump collection is in process");
+		qca_wait_for_dump_collection(hdev);
+	} else if (qca->memdump_state == QCA_MEMDUMP_COLLECTING) {
+		/* Let us wait here until memory dump collected or
+		 * memory dump timer expired.
+		 */
+		bt_dev_info(hdev, "waiting for dump to complete");
+		qca_wait_for_dump_collection(hdev);
+	}
+
+	mutex_lock(&qca->hci_memdump_lock);
+	if (qca->memdump_state != QCA_MEMDUMP_COLLECTED) {
+		qca->memdump_state = QCA_MEMDUMP_TIMEOUT;
+		if (!test_bit(QCA_HW_ERROR_EVENT, &qca->flags)) {
+			/* Inject hw error event to reset the device
+			 * and driver.
+			 */
+			hci_reset_dev(hu->hdev);
+		}
+	}
+	mutex_unlock(&qca->hci_memdump_lock);
 }
 
 static int qca_wcn3990_init(struct hci_uart *hu)
@@ -1643,6 +1673,8 @@ static int qca_setup(struct hci_uart *hu)
 	if (ret)
 		return ret;
 
+	clear_bit(QCA_SSR_TRIGGERED, &qca->flags);
+
 	if (qca_is_wcn399x(soc_type)) {
 		set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
 
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation
maintainer
#1 lore raw

Hi Venkata,

Quoted 11 lines

1.During SSR for command time out if BT SoC goes to inresponsive state, power cycling of BT SoC was not happening.Given the fix by sending hw error event to reset the BT SoC.

2.If SSR is triggered then ignore the transmit data requests to BT SoC until SSR is completed.

---
drivers/bluetooth/hci_qca.c | 40 ++++++++++++++++++++++++++++++++++++----

1 file changed, 36 insertions(+), 4 deletions(-)

patch has been applied to bluetooth-next tree.

Regards

Marcel