arm64: dts: meson-khadas-vim3: add Khadas MCU nodes
Subsystems (2)
PATCH 1/1 arm64: dts: meson-khadas-vim3: add Khadas MCU nodes
Add the Khadas MCU node with active FAN thermal nodes for all the Khadas VIM3 variants.
Signed-off-by Neil Armstrong <[email protected]>
Reviewed-by Amit Kucheria <[email protected]>
---
Hi Kevin,
The bindings has been reviewed and merged by Lee,
could you apply this one via the amlogic tree ?
Thanks,
Neil
.../boot/dts/amlogic/meson-khadas-vim3.dtsi | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+)
arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +23 -0
@@ -183,6 +183,23 @@ hdmi-phandle = <&hdmi_tx>; }; +&cpu_thermal { + trips { + cpu_active: cpu-active { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + }; + + cooling-maps { + map { + trip = <&cpu_active>; + cooling-device = <&khadas_mcu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + &ext_mdio { external_phy: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */
@@ -222,6 +239,12 @@ pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>; pinctrl-names = "default"; + khadas_mcu: system-controller@18 { + compatible = "khadas,mcu"; + reg = <0x18>; + #cooling-cells = <2>; + }; + gpio_expander: gpio-controller@20 { compatible = "ti,tca6408"; reg = <0x20>;
Signature · 1 line
2.22.0
Quoted 2 lines · Neil Armstrong
Add the Khadas MCU node with active FAN thermal nodes for all the Khadas VIM3 variants.
Applied, thanks!
[1/1] arm64: dts: meson-khadas-vim3: add Khadas MCU nodes
commit: cabb1f3827109372dcb80081cc654eb54f997afc
Best regards,
Signature · 1 line
Kevin Hilman <[email protected]>
This patch was applied to khilman/linux-amlogic.git (refs/heads/for-next).
Hello:
This patch was applied to khilman/linux-amlogic.git (refs/heads/for-next).
Quoted 9 lines · On Mon, 13 Jul 2020 08:59:31 +0200 you wrote:
Add the Khadas MCU node with active FAN thermal nodes for all the Khadas VIM3 variants.
Signed-off-by Neil Armstrong <[email protected]>Reviewed-by Amit Kucheria <[email protected]>---
Hi Kevin,[...]
Here is a summary with links:
- arm64: dts: meson-khadas-vim3: add Khadas MCU nodes
https://git.kernel.org/khilman/linux-amlogic/c/cabb1f3827109372dcb80081cc654eb54f997afc
You are awesome, thank you!
Signature · 7 lines
Deet-doot-dot, I am a bot. https://korg.wiki.kernel.org/userdoc/pwbot _______________________________________________ linux-amlogic mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-amlogic