Skip to contentSkip to conversation

qed: Disable "MFW indication via attention" SPAM every 5 minutes

PATCH Applied Laurence Oberman 3 participants 3 messages Jul 14, 2020 – Jul 15, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 qed: Disable "MFW indication via attention" SPAM every 5 minutes

This is likely firmware causing this but its starting to annoy customers. Change the message level to verbose to prevent the spam.
Note that this seems to only show up with ISCSI enabled on the HBA via the qedi driver.

---
 drivers/net/ethernet/qlogic/qed/qed_int.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/qlogic/qed/qed_int.c +2 -1
index b7b974f..d853eb9 100644
@@ -1193,7 +1193,8 @@ static int qed_int_attentions(struct qed_hwfn *p_hwfn)
 			index, attn_bits, attn_acks, asserted_bits,
 			deasserted_bits, p_sb_attn_sw->known_attn);
 	} else if (asserted_bits == 0x100) {
-		DP_INFO(p_hwfn, "MFW indication via attention\n");
+		DP_VERBOSE(p_hwfn, NETIF_MSG_INTR,
+			   "MFW indication via attention\n");
 	} else {
 		DP_VERBOSE(p_hwfn, NETIF_MSG_INTR,
 			   "MFW indication [deassertion]\n");
Signature · 1 line
1.8.3.1
maintainer Applied
#1 lore raw

From: Laurence Oberman <[email protected]>
Date: Tue, 14 Jul 2020 18:08:05 -0400

Quoted 6 lines

This is likely firmware causing this but its starting to annoy customers. Change the message level to verbose to prevent the spam.
Note that this seems to only show up with ISCSI enabled on the HBA via the qedi driver.

Applied, thanks.

Acked-by on v1 1/1
#2 lore raw
In reply to Laurence Oberman
Quoted 9 lines

----------------------------------------------------------------------
This is likely firmware causing this but its starting to annoy customers. Change the message level to verbose to prevent the spam.
Note that this seems to only show up with ISCSI enabled on the HBA via the

qedi driver.

Thanks for handling this, Laurence, we actually had the same fix in out of tree driver recently, just missed upstreaming it.