usb: xhci: add debugfs support for ep with stream
Subsystems (2)
PATCH v2 1/1 usb: xhci: add debugfs support for ep with stream
To show the trb ring of streams, use the exsiting ring files of bulk ep to show trb ring of one specific stream ID, which stream ID's trb ring will be shown, is controlled by a new debugfs file stream_id, this is to avoid to create a large number of dir for every allocate stream IDs, another debugfs file stream_context_array is created to show all the allocated stream context array entries.
---
chanages for v2:
- Drop stream files remove, the stream files will be removed with ep dir removal, keep the ep but only remove streams actually does not make sense in current code.
- Use the new_ring for show_ring pointer for non-zero ep.
drivers/usb/host/xhci-debugfs.c | 112 +++++++++++++++++++++++++++++++++++++++- drivers/usb/host/xhci-debugfs.h | 10 ++++ drivers/usb/host/xhci.c | 1 + 3 files changed, 122 insertions(+), 1 deletion(-)
drivers/usb/host/xhci-debugfs.c +111 -1
@@ -450,9 +450,14 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci,if (!epriv)return ; +if (dev->eps[ep_index].ring) + epriv->show_ring = dev->eps[ep_index].ring; +else + epriv->show_ring = dev->eps[ep_index].new_ring; +snprintf (epriv->name,sizeof (epriv->name),"ep%02d" , ep_index); epriv->root =xhci_debugfs_create_ring_dir (xhci, - &dev->eps[ep_index].ring, + &epriv->show_ring, epriv->name, spriv->root); spriv->eps[ep_index] = epriv;
@@ -474,6 +479,111 @@ void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci,kfree (epriv); } +static int xhci_stream_id_show (struct seq_file *s,void *unused) +{ +struct xhci_ep_priv *epriv = s->private; + +if (!epriv->stream_info) +return -EPERM ; + +seq_printf (s,"Supported stream IDs are 1 ~ %d, trb ring to be shown is for stream id %d\n" , + epriv->stream_info->num_streams -1 , epriv->stream_id); + +return 0 ; +} + +static int xhci_stream_id_open (struct inode *inode,struct file *file) +{ +return single_open (file, xhci_stream_id_show, inode->i_private); +} + +static ssize_t xhci_stream_id_write (struct file *file,const char __user *ubuf, +size_t count,loff_t *ppos) +{ +struct seq_file *s = file->private_data; +struct xhci_ep_priv *epriv = s->private; +int ret; +u16 stream_id;/* MaxPStreams + 1 <= 16 */ + +if (!epriv->stream_info) +return -EPERM ; + +/* Decimal number */ + ret =kstrtou16_from_user (ubuf, count,10 , &stream_id); +if (ret) +return ret; + +if (stream_id ==0 || stream_id >= epriv->stream_info->num_streams) +return -EINVAL ; + + epriv->stream_id = stream_id; + epriv->show_ring = epriv->stream_info->stream_rings[stream_id]; + +return count; +} + +static const struct file_operations stream_id_fops = { + .open = xhci_stream_id_open, + .write = xhci_stream_id_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int xhci_stream_context_array_show (struct seq_file *s,void *unused) +{ +struct xhci_ep_priv *epriv = s->private; +struct xhci_stream_ctx *stream_ctx; +dma_addr_t dma; +int id; + +if (!epriv->stream_info) +return -EPERM ; + +seq_printf (s,"Allocated %d streams and %d stream context array entries\n" , + epriv->stream_info->num_streams, + epriv->stream_info->num_stream_ctxs); + +for (id =0 ; id < epriv->stream_info->num_stream_ctxs; id++) { + stream_ctx = epriv->stream_info->stream_ctx_array + id; + dma = epriv->stream_info->ctx_array_dma + id *16 ; +if (id < epriv->stream_info->num_streams) +seq_printf (s,"%pad stream id %d deq %016llx\n" , &dma, + id,le64_to_cpu (stream_ctx->stream_ring)); +else +seq_printf (s,"%pad stream context entry not used deq %016llx\n" , + &dma,le64_to_cpu (stream_ctx->stream_ring)); + } + +return 0 ; +} +DEFINE_SHOW_ATTRIBUTE (xhci_stream_context_array); + +void xhci_debugfs_create_stream_files (struct xhci_hcd *xhci, +struct xhci_virt_device *dev, +int ep_index) +{ +struct xhci_slot_priv *spriv = dev->debugfs_private; +struct xhci_ep_priv *epriv; + +if (!spriv || !spriv->eps[ep_index] || + !dev->eps[ep_index].stream_info) +return ; + + epriv = spriv->eps[ep_index]; + epriv->stream_info = dev->eps[ep_index].stream_info; + +/* Show trb ring of stream ID 1 by default */ + epriv->stream_id =1 ; + epriv->show_ring = epriv->stream_info->stream_rings[1 ]; +debugfs_create_file ("stream_id" ,0644 , + epriv->root, epriv, + &stream_id_fops); +debugfs_create_file ("stream_context_array" ,0444 , + epriv->root, epriv, + &xhci_stream_context_array_fops); +} +void xhci_debugfs_create_slot (struct xhci_hcd *xhci,int slot_id) {struct xhci_slot_priv *priv;
drivers/usb/host/xhci-debugfs.h +10 -0
@@ -91,6 +91,9 @@ struct xhci_file_map {struct xhci_ep_priv {char name[DEBUGFS_NAMELEN ];struct dentry *root; +struct xhci_stream_info *stream_info; +struct xhci_ring *show_ring; +unsigned int stream_id; };struct xhci_slot_priv {
@@ -113,6 +116,9 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci,void xhci_debugfs_remove_endpoint (struct xhci_hcd *xhci,struct xhci_virt_device *virt_dev,int ep_index); +void xhci_debugfs_create_stream_files (struct xhci_hcd *xhci, +struct xhci_virt_device *virt_dev, +int ep_index);#else static inline void xhci_debugfs_init (struct xhci_hcd *xhci) { }static inline void xhci_debugfs_exit (struct xhci_hcd *xhci) { }
@@ -128,6 +134,10 @@ static inline void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, int ep_index) { } +static inline void +xhci_debugfs_create_stream_files(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + int ep_index) { }#endif /* CONFIG_DEBUG_FS */ #endif /* __LINUX_XHCI_DEBUGFS_H */
drivers/usb/host/xhci.c +1 -0
@@ -3529,6 +3529,7 @@ static int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,xhci_dbg (xhci,"Slot %u ep ctx %u now has streams.\n" , udev->slot_id, ep_index); vdev->eps[ep_index].ep_state |=EP_HAS_STREAMS ; +xhci_debugfs_create_stream_files (xhci, vdev, ep_index); }xhci_free_command (xhci, config_cmd);spin_unlock_irqrestore (&xhci->lock, flags);
Signature · 1 line
2.7.4
Hi
Quoted 201 lines
-----Original Message-----
From: Jun Li <[email protected]>
Sent: Thursday, July 16, 2020 8:40 PM
To: [email protected]
Cc: [email protected]; [email protected]; dl-linux-imx <[email protected]>
Subject: [PATCH v2] usb: xhci: add debugfs support for ep with streamTo show the trb ring of streams, use the exsiting ring files of bulk ep to show trb ring of one specific stream ID, which stream ID's trb ring will be shown, is controlled by a new debugfs file
stream_id, this is to avoid to create a large number of dir for every allocate stream IDs, another debugfs filestream_context_arrayis created to show all the allocated stream context array entries.Signed-off-by Li Jun <[email protected]>---
chanages for v2:(quoted diff) +0
-2- Drop stream files remove, the stream files will be removed with ep dir removal, keep the ep but only remove streams actually does not make sense in current code. - Use the new_ring for show_ring pointer for non-zero ep. drivers/usb/host/xhci-debugfs.c | 112 +++++++++++++++++++++++++++++++++++++++- drivers/usb/host/xhci-debugfs.h | 10 ++++ drivers/usb/host/xhci.c | 1 + 3 files changed, 122 insertions(+), 1 deletion(-)drivers/usb/host/xhci-debugfs.c +108
-1@@ -450,9 +450,14 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci,if (!epriv)return ; +if (dev->eps[ep_index].ring) + epriv->show_ring = dev->eps[ep_index].ring; +else + epriv->show_ring = dev->eps[ep_index].new_ring; +snprintf (epriv->name,sizeof (epriv->name),"ep%02d" , ep_index); epriv->root =xhci_debugfs_create_ring_dir (xhci, - &dev->eps[ep_index].ring, + &epriv->show_ring, epriv->name, spriv->root); spriv->eps[ep_index] = epriv;@@ -474,6 +479,111 @@ void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci,kfree (epriv); } +static int xhci_stream_id_show (struct seq_file *s,void *unused) { +struct xhci_ep_priv *epriv = s->private; + +if (!epriv->stream_info) +return -EPERM ; + + seq_printf(s, "Supported stream IDs are 1 ~ %d, trb ring to be shown is for stream id %d\n", + epriv->stream_info->num_streams - 1, epriv->stream_id); + +return 0 ; +} + +static int xhci_stream_id_open (struct inode *inode,struct file *file) +{ +return single_open (file, xhci_stream_id_show, inode->i_private); } + +static ssize_t xhci_stream_id_write (struct file *file,const char __user *ubuf, +size_t count,loff_t *ppos) +{ +struct seq_file *s = file->private_data; +struct xhci_ep_priv *epriv = s->private; +int ret; +u16 stream_id;/* MaxPStreams + 1 <= 16 */ + +if (!epriv->stream_info) +return -EPERM ; + +/* Decimal number */ + ret =kstrtou16_from_user (ubuf, count,10 , &stream_id); +if (ret) +return ret; + +if (stream_id ==0 || stream_id >= epriv->stream_info->num_streams) +return -EINVAL ; + + epriv->stream_id = stream_id; + epriv->show_ring = epriv->stream_info->stream_rings[stream_id]; + +return count; +} + +static const struct file_operations stream_id_fops = { + .open = xhci_stream_id_open, + .write = xhci_stream_id_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int xhci_stream_context_array_show (struct seq_file *s,void +*unused) { +struct xhci_ep_priv *epriv = s->private; +struct xhci_stream_ctx *stream_ctx; +dma_addr_t dma; +int id; + +if (!epriv->stream_info) +return -EPERM ; + +seq_printf (s,"Allocated %d streams and %d stream context array entries\n" , + epriv->stream_info->num_streams, + epriv->stream_info->num_stream_ctxs); + +for (id =0 ; id < epriv->stream_info->num_stream_ctxs; id++) { + stream_ctx = epriv->stream_info->stream_ctx_array + id; + dma = epriv->stream_info->ctx_array_dma + id *16 ; +if (id < epriv->stream_info->num_streams) +seq_printf (s,"%pad stream id %d deq %016llx\n" , &dma, + id,le64_to_cpu (stream_ctx->stream_ring)); +else +seq_printf (s,"%pad stream context entry not used deq %016llx\n" , + &dma,le64_to_cpu (stream_ctx->stream_ring)); + } + +return 0 ; +} +DEFINE_SHOW_ATTRIBUTE (xhci_stream_context_array); + +void xhci_debugfs_create_stream_files (struct xhci_hcd *xhci, +struct xhci_virt_device *dev, +int ep_index) +{ +struct xhci_slot_priv *spriv = dev->debugfs_private; +struct xhci_ep_priv *epriv; + +if (!spriv || !spriv->eps[ep_index] || + !dev->eps[ep_index].stream_info) +return ; + + epriv = spriv->eps[ep_index]; + epriv->stream_info = dev->eps[ep_index].stream_info; + +/* Show trb ring of stream ID 1 by default */ + epriv->stream_id =1 ; + epriv->show_ring = epriv->stream_info->stream_rings[1 ]; +debugfs_create_file ("stream_id" ,0644 , + epriv->root, epriv, + &stream_id_fops); +debugfs_create_file ("stream_context_array" ,0444 , + epriv->root, epriv, + &xhci_stream_context_array_fops); } +void xhci_debugfs_create_slot (struct xhci_hcd *xhci,int slot_id) {struct xhci_slot_priv *priv;drivers/usb/host/xhci-debugfs.h +6
-0@@ -91,6 +91,9 @@ struct xhci_file_map { struct xhci_ep_priv {char name[DEBUGFS_NAMELEN ];struct dentry *root; +struct xhci_stream_info *stream_info; +struct xhci_ring *show_ring; +unsigned int stream_id; };struct xhci_slot_priv {@@ -113,6 +116,9 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci, void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, int ep_index); +void xhci_debugfs_create_stream_files (struct xhci_hcd *xhci, +struct xhci_virt_device *virt_dev, +int ep_index);#else static inline void xhci_debugfs_init(struct xhci_hcd *xhci) { } static inline void
xhci_debugfs_exit(struct xhci_hcd *xhci){ } @@ -128,6 +134,10 @@ static inline void xhci_debugfs_remove_endpoint(structxhci_hcd*xhci,drivers/usb/host/xhci-debugfs.h +4
-0struct xhci_virt_device *virt_dev, int ep_index) { } +static inline void +xhci_debugfs_create_stream_files (struct xhci_hcd *xhci, +struct xhci_virt_device *virt_dev, +int ep_index) { }#endif /* CONFIG_DEBUG_FS */ #endif /* __LINUX_XHCI_DEBUGFS_H */ drivers/usb/host/xhci.c index renamed from drivers/usb/host/xhci.c +0
-0bee5dec..2d6584c 100644
drivers/usb/host/xhci.c +1
-0@@ -3529,6 +3529,7 @@ static int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,xhci_dbg (xhci,"Slot %u ep ctx %u now has streams.\n" , udev->slot_id, ep_index); vdev->eps[ep_index].ep_state |=EP_HAS_STREAMS ; +xhci_debugfs_create_stream_files (xhci, vdev, ep_index); }xhci_free_command (xhci, config_cmd);
Quoted 3 lines
spin_unlock_irqrestore(&xhci->lock, flags);
--
2.7.4
A gentle ping...
Thanks
Li Jun
Quoted 53 lines · Jun Li
Hi
Quoted 51 lines
-----Original Message-----
From: Jun Li <[email protected]>
Sent: Thursday, July 16, 2020 8:40 PM
To: [email protected]
Cc: [email protected]; [email protected]; dl-linux-imx <[email protected]>
Subject: [PATCH v2] usb: xhci: add debugfs support for ep with streamTo show the trb ring of streams, use the exsiting ring files of bulk ep to show trb ring of one specific stream ID, which stream ID's trb ring will be shown, is controlled by a new debugfs file
stream_id, this is to avoid to create a large number of dir for every allocate stream IDs, another debugfs filestream_context_arrayis created to show all the allocated stream context array entries.Signed-off-by Li Jun <[email protected]>---
chanages for v2:(quoted diff) +0
-2- Drop stream files remove, the stream files will be removed with ep dir removal, keep the ep but only remove streams actually does not make sense in current code. - Use the new_ring for show_ring pointer for non-zero ep. drivers/usb/host/xhci-debugfs.c | 112 +++++++++++++++++++++++++++++++++++++++- drivers/usb/host/xhci-debugfs.h | 10 ++++ drivers/usb/host/xhci.c | 1 + 3 files changed, 122 insertions(+), 1 deletion(-)drivers/usb/host/xhci-debugfs.c +6
-1@@ -450,9 +450,14 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci,if (!epriv)return ; +if (dev->eps[ep_index].ring) + epriv->show_ring = dev->eps[ep_index].ring; +else + epriv->show_ring = dev->eps[ep_index].new_ring; +snprintf (epriv->name,sizeof (epriv->name),"ep%02d" , ep_index); epriv->root =xhci_debugfs_create_ring_dir (xhci, - &dev->eps[ep_index].ring, + &epriv->show_ring, epriv->name, spriv->root); spriv->eps[ep_index] = epriv;@@ -474,6 +479,111 @@ void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci,kfree (epriv); }
Quoted 8 lines
drivers/usb/host/xhci-debugfs.c void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci,
Quoted 8 lines
drivers/usb/host/xhci-debugfs.c +7
-0+static int xhci_stream_id_show(struct seq_file *s, void *unused) { + struct xhci_ep_priv *epriv = s->private; + + if (!epriv->stream_info) + return -EPERM; + + seq_printf(s, "Supported stream IDs are 1 ~ %d, trb ring to be shown is for stream id %d\n",
Minor change, but maybe something shorter like:
"Show stream ID %d trb ring, supported [1 - %d]
Quoted 139 lines
Quoted 139 lines
drivers/usb/host/xhci-debugfs.c +95
-0+ epriv->stream_info->num_streams - 1, epriv->stream_id); + +return 0 ; +} + +static int xhci_stream_id_open (struct inode *inode,struct file *file) +{ +return single_open (file, xhci_stream_id_show, inode->i_private); } + +static ssize_t xhci_stream_id_write (struct file *file,const char __user *ubuf, +size_t count,loff_t *ppos) +{ +struct seq_file *s = file->private_data; +struct xhci_ep_priv *epriv = s->private; +int ret; +u16 stream_id;/* MaxPStreams + 1 <= 16 */ + +if (!epriv->stream_info) +return -EPERM ; + +/* Decimal number */ + ret =kstrtou16_from_user (ubuf, count,10 , &stream_id); +if (ret) +return ret; + +if (stream_id ==0 || stream_id >= epriv->stream_info->num_streams) +return -EINVAL ; + + epriv->stream_id = stream_id; + epriv->show_ring = epriv->stream_info->stream_rings[stream_id]; + +return count; +} + +static const struct file_operations stream_id_fops = { + .open = xhci_stream_id_open, + .write = xhci_stream_id_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int xhci_stream_context_array_show (struct seq_file *s,void +*unused) { +struct xhci_ep_priv *epriv = s->private; +struct xhci_stream_ctx *stream_ctx; +dma_addr_t dma; +int id; + +if (!epriv->stream_info) +return -EPERM ; + +seq_printf (s,"Allocated %d streams and %d stream context array entries\n" , + epriv->stream_info->num_streams, + epriv->stream_info->num_stream_ctxs); + +for (id =0 ; id < epriv->stream_info->num_stream_ctxs; id++) { + stream_ctx = epriv->stream_info->stream_ctx_array + id; + dma = epriv->stream_info->ctx_array_dma + id *16 ; +if (id < epriv->stream_info->num_streams) +seq_printf (s,"%pad stream id %d deq %016llx\n" , &dma, + id,le64_to_cpu (stream_ctx->stream_ring)); +else +seq_printf (s,"%pad stream context entry not used deq %016llx\n" , + &dma,le64_to_cpu (stream_ctx->stream_ring)); + } + +return 0 ; +} +DEFINE_SHOW_ATTRIBUTE (xhci_stream_context_array); + +void xhci_debugfs_create_stream_files (struct xhci_hcd *xhci, +struct xhci_virt_device *dev, +int ep_index) +{ +struct xhci_slot_priv *spriv = dev->debugfs_private; +struct xhci_ep_priv *epriv; + +if (!spriv || !spriv->eps[ep_index] || + !dev->eps[ep_index].stream_info) +return ; + + epriv = spriv->eps[ep_index]; + epriv->stream_info = dev->eps[ep_index].stream_info; + +/* Show trb ring of stream ID 1 by default */ + epriv->stream_id =1 ; + epriv->show_ring = epriv->stream_info->stream_rings[1 ]; +debugfs_create_file ("stream_id" ,0644 , + epriv->root, epriv, + &stream_id_fops); +debugfs_create_file ("stream_context_array" ,0444 , + epriv->root, epriv, + &xhci_stream_context_array_fops); } +void xhci_debugfs_create_slot (struct xhci_hcd *xhci,int slot_id) {struct xhci_slot_priv *priv;drivers/usb/host/xhci-debugfs.h +6
-0@@ -91,6 +91,9 @@ struct xhci_file_map { struct xhci_ep_priv {char name[DEBUGFS_NAMELEN ];struct dentry *root; +struct xhci_stream_info *stream_info; +struct xhci_ring *show_ring; +unsigned int stream_id; };struct xhci_slot_priv {@@ -113,6 +116,9 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci, void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, int ep_index); +void xhci_debugfs_create_stream_files (struct xhci_hcd *xhci, +struct xhci_virt_device *virt_dev, +int ep_index);#else static inline void xhci_debugfs_init(struct xhci_hcd *xhci) { } static inline void
xhci_debugfs_exit(struct xhci_hcd *xhci){ } @@ -128,6 +134,10 @@ static inline void xhci_debugfs_remove_endpoint(structxhci_hcd*xhci,drivers/usb/host/xhci-debugfs.h +4
-0struct xhci_virt_device *virt_dev, int ep_index) { } +static inline void +xhci_debugfs_create_stream_files (struct xhci_hcd *xhci, +struct xhci_virt_device *virt_dev, +int ep_index) { }#endif /* CONFIG_DEBUG_FS */ #endif /* __LINUX_XHCI_DEBUGFS_H */ drivers/usb/host/xhci.c index renamed from drivers/usb/host/xhci.c +0
-0bee5dec..2d6584c 100644
drivers/usb/host/xhci.c +0
-0@@ -3529,6 +3529,7 @@ static int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,xhci_dbg (xhci,"Slot %u ep ctx %u now has streams.\n" , udev->slot_id, ep_index); vdev->eps[ep_index].ep_state |=EP_HAS_STREAMS ;
Quoted 8 lines
Quoted 6 lines
drivers/usb/host/xhci.c +1
-0+xhci_debugfs_create_stream_files (xhci, vdev, ep_index); }xhci_free_command (xhci, config_cmd);
spin_unlock_irqrestore(&xhci->lock, flags);
--
2.7.4A gentle ping...
Looks good to me, If you approve I'll make the above change. It will take some time to actually test it, I haven't got a UAS or other stream supporting usb device in my current location.
Adding to queue to get some automated testing done on it.
-Mathias
Quoted 66 lines
-----Original Message-----
From: Mathias Nyman <[email protected]>
Sent: Monday, August 17, 2020 7:48 PM
To: Jun Li <[email protected]>; [email protected]
Cc: [email protected]; [email protected]; dl-linux-imx <[email protected]>
Subject: Re: [PATCH v2] usb: xhci: add debugfs support for ep with streamQuoted 15 lines · Jun Li
Hi
Quoted 13 lines
-----Original Message-----
From: Jun Li <[email protected]>
Sent: Thursday, July 16, 2020 8:40 PM
To: [email protected]
Cc: [email protected]; [email protected]; dl-linux-imx <[email protected]>
Subject: [PATCH v2] usb: xhci: add debugfs support for ep with streamTo show the trb ring of streams, use the exsiting ring files of bulk ep to show trb ring of one specific stream ID, which stream ID's trb ring will be shown, is controlled by a new debugfs file
stream_id, this is to avoid to create a large number of dir for every allocate stream IDs, another debugfs filestream_context_arrayis created to show allthe allocated stream context array entries.
Quoted 39 lines
Quoted 39 lines
Signed-off-by Li Jun <[email protected]>---
chanages for v2:(quoted diff) +1
-2- Drop stream files remove, the stream files will be removed with ep dir removal, keep the ep but only remove streams actually does not make sense in current code. - Use the new_ring for show_ring pointer for non-zero ep. drivers/usb/host/xhci-debugfs.c | 112 +++++++++++++++++++++++++++++++++++++++- drivers/usb/host/xhci-debugfs.h | 10 ++++ drivers/usb/host/xhci.c | 1 + 3 files changed, 122 insertions(+), 1 deletion(-)(quoted diff) +0
-0
b/drivers/usb/host/xhci-debugfs.cindex 65d8de4..708585c 100644drivers/usb/host/xhci-debugfs.c +6
-1@@ -450,9 +450,14 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci,if (!epriv)return ; +if (dev->eps[ep_index].ring) + epriv->show_ring = dev->eps[ep_index].ring; +else + epriv->show_ring = dev->eps[ep_index].new_ring; +snprintf (epriv->name,sizeof (epriv->name),"ep%02d" , ep_index); epriv->root =xhci_debugfs_create_ring_dir (xhci, - &dev->eps[ep_index].ring, + &epriv->show_ring, epriv->name, spriv->root); spriv->eps[ep_index] = epriv;@@ -474,6 +479,111 @@ void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci,kfree (epriv); }
Quoted 12 lines
Quoted 9 lines
drivers/usb/host/xhci-debugfs.c void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci,
Quoted 9 lines
drivers/usb/host/xhci-debugfs.c +8
-0+static int xhci_stream_id_show(struct seq_file *s, void *unused) { + struct xhci_ep_priv *epriv = s->private; + + if (!epriv->stream_info) + return -EPERM; + + seq_printf(s, "Supported stream IDs are 1 ~ %d, trb ring to be +shown is for stream id %d\n",Minor change, but maybe something shorter like:
"Show stream ID %d trb ring, supported [1 - %d]
Looks better, thanks.
Quoted 150 lines
Quoted 11 lines
drivers/usb/host/xhci-debugfs.c void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci,
Quoted 11 lines
drivers/usb/host/xhci-debugfs.c +10
-0+ epriv->stream_info->num_streams - 1, epriv->stream_id); + +return 0 ; +} + +static int xhci_stream_id_open (struct inode *inode,struct file +*file) { +return single_open (file, xhci_stream_id_show, inode->i_private); } + +static ssize_t xhci_stream_id_write(struct file *file, const char __user*ubuf,
Quoted 98 lines
Quoted 98 lines
drivers/usb/host/xhci-debugfs.c +84
-0+ size_t count, loff_t *ppos) { + struct seq_file *s = file->private_data; +struct xhci_ep_priv *epriv = s->private; +int ret; +u16 stream_id;/* MaxPStreams + 1 <= 16 */ + +if (!epriv->stream_info) +return -EPERM ; + +/* Decimal number */ + ret =kstrtou16_from_user (ubuf, count,10 , &stream_id); +if (ret) +return ret; + +if (stream_id ==0 || stream_id >= epriv->stream_info->num_streams) +return -EINVAL ; + + epriv->stream_id = stream_id; + epriv->show_ring = epriv->stream_info->stream_rings[stream_id]; + +return count; +} + +static const struct file_operations stream_id_fops = { + .open = xhci_stream_id_open, + .write = xhci_stream_id_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int xhci_stream_context_array_show (struct seq_file *s,void +*unused) { +struct xhci_ep_priv *epriv = s->private; +struct xhci_stream_ctx *stream_ctx; +dma_addr_t dma; +int id; + +if (!epriv->stream_info) +return -EPERM ; + +seq_printf (s,"Allocated %d streams and %d stream context array entries\n" , + epriv->stream_info->num_streams, + epriv->stream_info->num_stream_ctxs); + +for (id =0 ; id < epriv->stream_info->num_stream_ctxs; id++) { + stream_ctx = epriv->stream_info->stream_ctx_array + id; + dma = epriv->stream_info->ctx_array_dma + id *16 ; +if (id < epriv->stream_info->num_streams) +seq_printf (s,"%pad stream id %d deq %016llx\n" , &dma, + id,le64_to_cpu (stream_ctx->stream_ring)); +else +seq_printf (s,"%pad stream context entry not used deq %016llx\n" , + &dma,le64_to_cpu (stream_ctx->stream_ring)); + } + +return 0 ; +} +DEFINE_SHOW_ATTRIBUTE (xhci_stream_context_array); + +void xhci_debugfs_create_stream_files (struct xhci_hcd *xhci, +struct xhci_virt_device *dev, +int ep_index) +{ +struct xhci_slot_priv *spriv = dev->debugfs_private; +struct xhci_ep_priv *epriv; + +if (!spriv || !spriv->eps[ep_index] || + !dev->eps[ep_index].stream_info) +return ; + + epriv = spriv->eps[ep_index]; + epriv->stream_info = dev->eps[ep_index].stream_info; + +/* Show trb ring of stream ID 1 by default */ + epriv->stream_id =1 ; + epriv->show_ring = epriv->stream_info->stream_rings[1 ]; +debugfs_create_file ("stream_id" ,0644 , + epriv->root, epriv, + &stream_id_fops); +debugfs_create_file ("stream_context_array" ,0444 , + epriv->root, epriv, + &xhci_stream_context_array_fops); } +void xhci_debugfs_create_slot (struct xhci_hcd *xhci,int slot_id) {struct xhci_slot_priv *priv;(quoted diff) +0
-0
b/drivers/usb/host/xhci-debugfs.hindex f7a4e24..f3348da 100644drivers/usb/host/xhci-debugfs.h +3
-0@@ -91,6 +91,9 @@ struct xhci_file_map { struct xhci_ep_priv {char name[DEBUGFS_NAMELEN ];struct dentry *root; +struct xhci_stream_info *stream_info; +struct xhci_ring *show_ring; +unsigned int stream_id; };Quoted 12 lines
Quoted 10 lines
drivers/usb/host/xhci-debugfs.h +3
-0struct xhci_slot_priv {@@ -113,6 +116,9 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci, void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, int ep_index); +void xhci_debugfs_create_stream_files (struct xhci_hcd *xhci, +struct xhci_virt_device *virt_dev, +int ep_index);#else static inline void xhci_debugfs_init (struct xhci_hcd *xhci) { }Quoted 2 lines
static inline void
xhci_debugfs_exit(struct xhci_hcd *xhci){ } @@ -128,6 +134,10 @@ static inline void xhci_debugfs_remove_endpoint(struct
xhci_hcd*xhci,Quoted 18 lines
Quoted 18 lines
drivers/usb/host/xhci-debugfs.h +4
-0struct xhci_virt_device *virt_dev, int ep_index) { } +static inline void +xhci_debugfs_create_stream_files (struct xhci_hcd *xhci, +struct xhci_virt_device *virt_dev, +int ep_index) { }#endif /* CONFIG_DEBUG_FS */ #endif /* __LINUX_XHCI_DEBUGFS_H */ drivers/usb/host/xhci.c index renamed from drivers/usb/host/xhci.c +0
-0bee5dec..2d6584c 100644
drivers/usb/host/xhci.c +0
-0@@ -3529,6 +3529,7 @@ static int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,xhci_dbg (xhci,"Slot %u ep ctx %u now has streams.\n" , udev->slot_id, ep_index); vdev->eps[ep_index].ep_state |=EP_HAS_STREAMS ;Quoted 8 lines
Quoted 6 lines
drivers/usb/host/xhci.c +1
-0+xhci_debugfs_create_stream_files (xhci, vdev, ep_index); }xhci_free_command (xhci, config_cmd);
spin_unlock_irqrestore(&xhci->lock, flags);
--
2.7.4A gentle ping...
Quoted 1 line
Looks good to me, If you approve I'll make the above change.
Above change is fine for me.
Quoted 4 lines
It will take some time to actually test it, I haven't got a UAS or other stream supporting usb device in my current location.
Adding to queue to get some automated testing done on it.
Thanks
Li Jun
Quoted 4 lines
-Mathias
Quoted 50 lines · Jun Li
Quoted 50 lines
-----Original Message-----
From: Mathias Nyman <[email protected]>
Sent: Monday, August 17, 2020 7:48 PM
To: Jun Li <[email protected]>; [email protected]
Cc: [email protected]; [email protected]; dl-linux-imx <[email protected]>
Subject: Re: [PATCH v2] usb: xhci: add debugfs support for ep with streamQuoted 15 lines · Jun Li
Hi
Quoted 13 lines
-----Original Message-----
From: Jun Li <[email protected]>
Sent: Thursday, July 16, 2020 8:40 PM
To: [email protected]
Cc: [email protected]; [email protected]; dl-linux-imx <[email protected]>
Subject: [PATCH v2] usb: xhci: add debugfs support for ep with streamTo show the trb ring of streams, use the exsiting ring files of bulk ep to show trb ring of one specific stream ID, which stream ID's trb ring will be shown, is controlled by a new debugfs file
stream_id, this is to avoid to create a large number of dir for every allocate stream IDs, another debugfs filestream_context_arrayis created to show allthe allocated stream context array entries.
Quoted 23 lines
Quoted 23 lines
Signed-off-by Li Jun <[email protected]>---
chanages for v2:(quoted diff) +1
-2- Drop stream files remove, the stream files will be removed with ep dir removal, keep the ep but only remove streams actually does not make sense in current code. - Use the new_ring for show_ring pointer for non-zero ep. drivers/usb/host/xhci-debugfs.c | 112 +++++++++++++++++++++++++++++++++++++++- drivers/usb/host/xhci-debugfs.h | 10 ++++ drivers/usb/host/xhci.c | 1 + 3 files changed, 122 insertions(+), 1 deletion(-)(quoted diff) +0
-0
b/drivers/usb/host/xhci-debugfs.cindex 65d8de4..708585c 100644drivers/usb/host/xhci-debugfs.c +0
-0@@ -450,9 +450,14 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci,if (!epriv)return ;
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
drivers/usb/host/xhci-debugfs.c void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci, · line 457
Quoted 5 lines
drivers/usb/host/xhci-debugfs.c +5
-0+if (dev->eps[ep_index].ring) + epriv->show_ring = dev->eps[ep_index].ring; +else + epriv->show_ring = dev->eps[ep_index].new_ring; +
Ran some tests and the I suspect the above code causes issues.
If an endpoint is dropped and added back the above code will store the old ring in epriv->show_ring as we have both a .ring and .new_ring present at that moment. Soon after this the old ring pointed to by .ring will be freed, and .ring = .new_ring will be set.
Old code showed whatever ring buffer eps[i].ring pointer pointed to when the sysfs file was read, (as we saved the address, &eps[i].ring). I see now that it in theory it had a small gap before .ring = .new_ring was set where user could read the ring buffer and .ring would still be a NULL pointer. That needs to be fixed as well.
I still like the old way of using double pointer more.
xhci driver will also dig out the current ring from eps[i].ring, so I think we should as well.
(in stream case it would be &ep->stream_info->stream_rings[stream_id])
-Mathias
Quoted 72 lines
-----Original Message-----
From: Mathias Nyman <[email protected]>
Sent: Monday, August 31, 2020 9:11 PM
To: Jun Li <[email protected]>; [email protected]
Cc: [email protected]; [email protected]; dl-linux-imx <[email protected]>
Subject: Re: [PATCH v2] usb: xhci: add debugfs support for ep with streamQuoted 53 lines · Jun Li
Quoted 53 lines
-----Original Message-----
From: Mathias Nyman <[email protected]>
Sent: Monday, August 17, 2020 7:48 PM
To: Jun Li <[email protected]>; [email protected]
Cc: [email protected]; [email protected]; dl-linux-imx <[email protected]>
Subject: Re: [PATCH v2] usb: xhci: add debugfs support for ep with streamQuoted 17 lines · Jun Li
Hi
Quoted 15 lines
-----Original Message-----
From: Jun Li <[email protected]>
Sent: Thursday, July 16, 2020 8:40 PM
To: [email protected]
Cc: [email protected]; [email protected]; dl-linux-imx <[email protected]>
Subject: [PATCH v2] usb: xhci: add debugfs support for ep with streamTo show the trb ring of streams, use the exsiting ring files of bulk ep to show trb ring of one specific stream ID, which stream ID's trb ring will be shown, is controlled by a new debugfs file
stream_id, this is to avoid to create a large number of dir for every allocate stream IDs, another debugfs filestream_context_arrayis created to show allthe allocated stream context array entries.
Quoted 23 lines
Quoted 23 lines
Signed-off-by Li Jun <[email protected]>---
chanages for v2:(quoted diff) +1
-2- Drop stream files remove, the stream files will be removed with ep dir removal, keep the ep but only remove streams actually does not make sense in current code. - Use the new_ring for show_ring pointer for non-zero ep. drivers/usb/host/xhci-debugfs.c | 112 +++++++++++++++++++++++++++++++++++++++- drivers/usb/host/xhci-debugfs.h | 10 ++++ drivers/usb/host/xhci.c | 1 + 3 files changed, 122 insertions(+), 1 deletion(-)(quoted diff) +0
-0
b/drivers/usb/host/xhci-debugfs.cindex 65d8de4..708585c 100644drivers/usb/host/xhci-debugfs.c +0
-0@@ -450,9 +450,14 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci,if (!epriv)return ;Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
drivers/usb/host/xhci-debugfs.c void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci, · line 457
Quoted 5 lines
drivers/usb/host/xhci-debugfs.c +5
-0+if (dev->eps[ep_index].ring) + epriv->show_ring = dev->eps[ep_index].ring; +else + epriv->show_ring = dev->eps[ep_index].new_ring; +Ran some tests and the I suspect the above code causes issues.
Quoted 4 lines
If an endpoint is dropped and added back the above code will store the old ring in
epriv->show_ringas we have both a .ring and .new_ring present at that moment. Soon after this the old ring pointed to by .ring will be freed, and .ring = .new_ring will be set.
Yes, in this case, eps[ep_index].ring still keeps the old ring address, but eps[ep_index].new_ring is pointing to the new/correct ring, my patch will store the old ring address.
Quoted 6 lines
Old code showed whatever ring buffer eps[i].ring pointer pointed ,to when the sysfs file was read, (as we saved the address, &eps[i].ring). I see now that it in theory it had a small gap before .ring = .new_ring was set where user could read the ring buffer and .ring would still be a NULL pointer.
That needs to be fixed as well.
Yes, also in above drop-then-add-back case the old code eps[i].ring still points to the old ring.
So considering we are creating debugfs file for ep before .ring = .new_ring;
.new_ring = NULL;
A solution of firstly check .new_ring seems can resolve the problems here:
if (dev->eps[ep_index].new_ring)
/* For first add of EP; or drop-then-add-back EP */ epriv->show_ring = dev->eps[ep_index].new_ring; else /* For EP0 */ epriv->show_ring = dev->eps[ep_index].ring;
Quoted 5 lines
I still like the old way of using double pointer more.
xhci driver will also dig out the current ring from eps[i].ring, so I think we should as well.
(in stream case it would be &ep->stream_info->stream_rings[stream_id])
stream case should no problem as it is epriv->show_ring = ep->stream_info->stream_rings[stream_id];
thanks
Li Jun
Quoted 2 lines
-Mathias
Hi
Quoted 26 lines
Quoted 16 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
(quoted diff) +0
-0
b/drivers/usb/host/xhci-debugfs.cindex 65d8de4..708585c 100644drivers/usb/host/xhci-debugfs.c +0
-0@@ -450,9 +450,14 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci,if (!epriv)return ;Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
drivers/usb/host/xhci-debugfs.c void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci, · line 457
Quoted 5 lines
drivers/usb/host/xhci-debugfs.c +5
-0+if (dev->eps[ep_index].ring) + epriv->show_ring = dev->eps[ep_index].ring; +else + epriv->show_ring = dev->eps[ep_index].new_ring; +Ran some tests and the I suspect the above code causes issues.
Quoted 4 lines
If an endpoint is dropped and added back the above code will store the old ring in
epriv->show_ringas we have both a .ring and .new_ring present at that moment. Soon after this the old ring pointed to by .ring will be freed, and .ring = .new_ring will be set.Yes, in this case, eps[ep_index].ring still keeps the old ring address, but eps[ep_index].new_ring is pointing to the new/correct ring, my patch will store the old ring address.
Quoted 1 line
Quoted 8 lines
Quoted 5 lines
Old code showed whatever ring buffer eps[i].ring pointer pointed ,to when the sysfs file was read, (as we saved the address, &eps[i].ring). I see now that it in theory it had a small gap before .ring = .new_ring was set where user could read the ring buffer and .ring would still be a NULL pointer.
That needs to be fixed as well.Yes, also in above drop-then-add-back case the old code eps[i].ring still points to the old ring.
yes, but only until for a short while until .ring = .new_ring is set.
Quoted 5 lines
So considering we are creating debugfs file for ep before .ring = .new_ring;
.new_ring = NULL;
Quoted 9 lines
A solution of firstly check .new_ring seems can resolve the problems here:
if (dev->eps[ep_index].new_ring)
/* For first add of EP; or drop-then-add-back EP */ epriv->show_ring = dev->eps[ep_index].new_ring; else /* For EP0 */ epriv->show_ring = dev->eps[ep_index].ring;
I think this debugfs code is just called too early. It shouldn't need to check new_ring pointer at all.
I wrote a fix that changes the order and makes sure endpoint is enabled and ring pointer is set correctly before we call xhci_debugfs_create_endpoint()
I think this streams support should be added on top of that
Quoted 8 lines
Quoted 5 lines
I still like the old way of using double pointer more.
xhci driver will also dig out the current ring from eps[i].ring, so I think we should as well.
(in stream case it would be &ep->stream_info->stream_rings[stream_id])stream case should no problem as it is
epriv->show_ring= ep->stream_info->stream_rings[stream_id];
Sounds good
-Mathias
Quoted 71 lines
-----Original Message-----
From: Mathias Nyman <[email protected]>
Sent: Wednesday, September 2, 2020 8:41 PM
To: Jun Li <[email protected]>; [email protected]
Cc: [email protected]; [email protected]; dl-linux-imx <[email protected]>
Subject: Re: [PATCH v2] usb: xhci: add debugfs support for ep with streamHi
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
drivers/usb/host/xhci-debugfs.c void xhci_debugfs_create_endpoint(struct xhci_hcd
Quoted 5 lines
(quoted diff) +0
-0
b/drivers/usb/host/xhci-debugfs.cindex 65d8de4..708585c 100644drivers/usb/host/xhci-debugfs.c +0
-0@@ -450,9 +450,14 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd*xhci,
Quoted 11 lines
Quoted 11 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/usb/host/xhci-debugfs.c void xhci_debugfs_create_endpoint(struct xhci_hcd · line 457
Quoted 8 lines
drivers/usb/host/xhci-debugfs.c +5
-0if (!epriv)return ; +if (dev->eps[ep_index].ring) + epriv->show_ring = dev->eps[ep_index].ring; +else + epriv->show_ring = dev->eps[ep_index].new_ring; +Ran some tests and the I suspect the above code causes issues.
Quoted 2 lines
Quoted 2 lines
If an endpoint is dropped and added back the above code will store the old ring in
epriv->show_ringas we have both a .ring and .new_ring presentat that moment.
Quoted 12 lines
Quoted 2 lines
Soon after this the old ring pointed to by .ring will be freed, and .ring = .new_ring will be set.
Yes, in this case, eps[ep_index].ring still keeps the old ring address, but eps[ep_index].new_ring is pointing to the new/correct ring, my patch will store the old ring address.
Quoted 5 lines
Old code showed whatever ring buffer eps[i].ring pointer pointed ,to when the sysfs file was read, (as we saved the address, &eps[i].ring). I see now that it in theory it had a small gap before .ring = .new_ring was set where user could read the ring buffer and .ring would
still be a NULL pointer.
Quoted 4 lines
Quoted 1 line
That needs to be fixed as well.
Yes, also in above drop-then-add-back case the old code eps[i].ring still points to the old ring.
yes, but only until for a short while until .ring = .new_ring is set.
Quoted 4 lines
So considering we are creating debugfs file for ep before .ring = .new_ring; .new_ring = NULL;
Quoted 8 lines
A solution of firstly check .new_ring seems can resolve the problems here:
if (dev->eps[ep_index].new_ring)
/* For first add of EP; or drop-then-add-back EP */ epriv->show_ring = dev->eps[ep_index].new_ring; else /* For EP0 */ epriv->show_ring = dev->eps[ep_index].ring;I think this debugfs code is just called too early. It shouldn't need to check
new_ringpointer at all.I wrote a fix that changes the order and makes sure endpoint is enabled and ring pointer is set correctly before we call
xhci_debugfs_create_endpoint()
Quoted 6 lines
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit.kernel.o
rg%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Fmnyman%2Fxhci.git%2Fcommit%2F%3Fh%3Dfo r-usb-linus%26id%3Dcf99aef5624a592fd4f3374c7060bfa1a65f15df&data=02%7C01%7 Cjun.li%40nxp.com%7C73e4663a6f6641fbb8b308d84f3d021a%7C686ea1d3bc2b4c6fa92cd99 c5c301635%7C0%7C0%7C637346470803922895&sdata=i4DfCW8EVUSAWnzb8Ql4jPjAOD5wp tfbaMrO8vKvtDc%3D&reserved=0
This is a good place for non-zero Eps, but does not cover ep0.
Li Jun
Quoted 15 lines
I think this streams support should be added on top of that
Quoted 9 lines
Quoted 6 lines
I still like the old way of using double pointer more. xhci driver will also dig out the current ring from eps[i].ring, so I think we should as well.
(in stream case it would be &ep->stream_info->stream_rings[stream_id])stream case should no problem as it is
epriv->show_ring= ep->stream_info->stream_rings[stream_id];Sounds good
-Mathias
Quoted 6 lines
Quoted 6 lines
I think this debugfs code is just called too early. It shouldn't need to check
new_ringpointer at all.I wrote a fix that changes the order and makes sure endpoint is enabled and ring pointer is set correctly before we call
xhci_debugfs_create_endpoint()
Quoted 9 lines
Quoted 6 lines
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit.kernel.o
rg%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Fmnyman%2Fxhci.git%2Fcommit%2F%3Fh%3Dfo r-usb-linus%26id%3Dcf99aef5624a592fd4f3374c7060bfa1a65f15df&data=02%7C01%7 Cjun.li%40nxp.com%7C73e4663a6f6641fbb8b308d84f3d021a%7C686ea1d3bc2b4c6fa92cd99 c5c301635%7C0%7C0%7C637346470803922895&sdata=i4DfCW8EVUSAWnzb8Ql4jPjAOD5wp tfbaMrO8vKvtDc%3D&reserved=0This is a good place for non-zero Eps, but does not cover ep0.
ep0 is special, it's not touched in these add/drop endpoint or check bandwidth functions.
ep0 ring is allocated earlier during slot creation in xhci_alloc_virt_device()
...
/* Allocate endpoint 0 ring */
dev->eps[0].ring = xhci_ring_alloc(xhci, 2, 1, TYPE_CTRL, 0, flags);
and for debugfs ep00 is added manually together with the slot xhci_debugfs_create_slot()
...
xhci_debugfs_create_ring_dir(xhci, &dev->eps[0].ring, "ep00", priv->root);
So regarding ep0 the change should be ok.
-Mathias
Quoted 40 lines
-----Original Message-----
From: Mathias Nyman <[email protected]>
Sent: Thursday, September 3, 2020 3:24 PM
To: Jun Li <[email protected]>; [email protected]
Cc: [email protected]; [email protected]; dl-linux-imx <[email protected]>
Subject: Re: [PATCH v2] usb: xhci: add debugfs support for ep with streamQuoted 19 lines
Quoted 7 lines
I think this debugfs code is just called too early. It shouldn't need to check
new_ringpointer at all.I wrote a fix that changes the order and makes sure endpoint is enabled and ring pointer is set correctly before we call
xhci_debugfs_create_endpoint()Quoted 11 lines
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit
.kernel.o rg%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Fmnyman%2Fxhci.git%2Fcommit%2F %3Fh%3Dfo r-usb-linus%26id%3Dcf99aef5624a592fd4f3374c7060bfa1a65f15df&data= 02%7C01%7 Cjun.li%40nxp.com%7C73e4663a6f6641fbb8b308d84f3d021a%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637346470803922895&sdata=i4DfCW8EVUSAWnzb8Ql4 jPjAOD5wp
tfbaMrO8vKvtDc%3D&reserved=0Quoted 2 lines
This is a good place for non-zero Eps, but does not cover ep0.
ep0 is special, it's not touched in these add/drop endpoint or check bandwidth functions.
ep0 ring is allocated earlier during slot creation in
xhci_alloc_virt_device()
...
/* Allocate endpoint 0 ring */
dev->eps[0].ring =xhci_ring_alloc(xhci, 2, 1, TYPE_CTRL, 0, flags);
Quoted 6 lines
and for debugfs ep00 is added manually together with the slot
xhci_debugfs_create_slot()
...
xhci_debugfs_create_ring_dir(xhci, &dev->eps[0].ring, "ep00", priv->root);So regarding ep0 the change should be ok.
Sorry, I forgot debugfs of ep0 is created via xhci_debugfs_create_slot().
Then I think your change is OK, also I gave a test with my stream/UAS device on top of your patch and it can work fine.
Do you need I post a new version of my patch(to remove touch of .new_ring)?
Thanks
Li Jun
Quoted 2 lines
-Mathias
Quoted 45 lines · Jun Li
Quoted 45 lines
-----Original Message-----
From: Mathias Nyman <[email protected]>
Sent: Thursday, September 3, 2020 3:24 PM
To: Jun Li <[email protected]>; [email protected]
Cc: [email protected]; [email protected]; dl-linux-imx <[email protected]>
Subject: Re: [PATCH v2] usb: xhci: add debugfs support for ep with streamQuoted 19 lines
Quoted 7 lines
I think this debugfs code is just called too early. It shouldn't need to check
new_ringpointer at all.I wrote a fix that changes the order and makes sure endpoint is enabled and ring pointer is set correctly before we call
xhci_debugfs_create_endpoint()Quoted 11 lines
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit
.kernel.o rg%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Fmnyman%2Fxhci.git%2Fcommit%2F %3Fh%3Dfo r-usb-linus%26id%3Dcf99aef5624a592fd4f3374c7060bfa1a65f15df&data= 02%7C01%7 Cjun.li%40nxp.com%7C73e4663a6f6641fbb8b308d84f3d021a%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637346470803922895&sdata=i4DfCW8EVUSAWnzb8Ql4 jPjAOD5wp
tfbaMrO8vKvtDc%3D&reserved=0Quoted 2 lines
This is a good place for non-zero Eps, but does not cover ep0.
ep0 is special, it's not touched in these add/drop endpoint or check bandwidth functions.
ep0 ring is allocated earlier during slot creation in
xhci_alloc_virt_device()
...
/* Allocate endpoint 0 ring */
dev->eps[0].ring =xhci_ring_alloc(xhci, 2, 1, TYPE_CTRL, 0, flags);and for debugfs ep00 is added manually together with the slot
xhci_debugfs_create_slot()
...
xhci_debugfs_create_ring_dir(xhci, &dev->eps[0].ring, "ep00", priv->root);
Quoted 8 lines
Quoted 1 line
So regarding ep0 the change should be ok.
Sorry, I forgot debugfs of ep0 is created via
xhci_debugfs_create_slot().Then I think your change is OK, also I gave a test with my stream/UAS device on top of your patch and it can work fine.
Do you need I post a new version of my
patch(to remove touch of .new_ring)?
If you could yes, and also change to a double pointer:
struct xhci_ep_priv {
...+ struct xhci_ring **show_ring;
};
And modify other places this change affects, such as:epriv->show_ring = &dev->eps[ep_index].ring;
-Mathias
Quoted 77 lines
-----Original Message-----
From: Mathias Nyman <[email protected]>
Sent: Thursday, September 3, 2020 5:39 PM
To: Jun Li <[email protected]>; [email protected]
Cc: [email protected]; [email protected]; dl-linux-imx <[email protected]>
Subject: Re: [PATCH v2] usb: xhci: add debugfs support for ep with streamQuoted 53 lines · Jun Li
Quoted 53 lines
-----Original Message-----
From: Mathias Nyman <[email protected]>
Sent: Thursday, September 3, 2020 3:24 PM
To: Jun Li <[email protected]>; [email protected]
Cc: [email protected]; [email protected]; dl-linux-imx <[email protected]>
Subject: Re: [PATCH v2] usb: xhci: add debugfs support for ep with streamQuoted 24 lines
Quoted 7 lines
I think this debugfs code is just called too early. It shouldn't need to check
new_ringpointer at all.I wrote a fix that changes the order and makes sure endpoint is enabled and ring pointer is set correctly before we call
xhci_debugfs_create_endpoint()Quoted 16 lines
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fg
it
.kernel.o rg%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Fmnyman%2Fxhci.git%2Fcommit% 2F
%3Fh%3Dfo r-usb-linus%26id%3Dcf99aef5624a592fd4f3374c7060bfa1a65f15df&dat a=
02%7C01%7 Cjun.li%40nxp.com%7C73e4663a6f6641fbb8b308d84f3d021a%7C686ea1d3bc2b 4c6fa92cd99c5c301635%7C0%7C0%7C637346470803922895&sdata=i4DfCW8EVUSAWnzb8Q l4
jPjAOD5wp
tfbaMrO8vKvtDc%3D&reserved=0Quoted 2 lines
This is a good place for non-zero Eps, but does not cover ep0.
ep0 is special, it's not touched in these add/drop endpoint or check bandwidth functions.
ep0 ring is allocated earlier during slot creation in
xhci_alloc_virt_device()
...
/* Allocate endpoint 0 ring */
dev->eps[0].ring = xhci_ring_alloc(xhci, 2, 1,TYPE_CTRL, 0,
flags);and for debugfs ep00 is added manually together with the slot
xhci_debugfs_create_slot()
...
xhci_debugfs_create_ring_dir(xhci, &dev->eps[0].ring, "ep00",priv->root);Quoted 8 lines
Quoted 1 line
So regarding ep0 the change should be ok.
Sorry, I forgot debugfs of ep0 is created via
xhci_debugfs_create_slot().Then I think your change is OK, also I gave a test with my stream/UAS device on top of your patch and it can work fine.
Do you need I post a new version of my
patch(to remove touch of .new_ring)?If you could yes, and also change to a double pointer:
struct xhci_ep_priv { ...
Review
Quoted 1 line
(quoted diff) +1
-0+ struct xhci_ring **show_ring;
With current: struct xhci_ring *show_ring;
As I use one trb file to show different trb rings for one EP, so I need get the addr of trb ring pointed by show_ring(which can be updated).
If I change it to be **show_ring, then I am passing the addr of dev->eps[i].ring to debugfs so I can't use show_ring's update value when show trb, makes me not easy to get the addr of target trb ring.
Thanks
Li Jun
Quoted 6 lines
};
And modify other places this change affects, such as:
epriv->show_ring= &dev->eps[ep_index].ring;-Mathias
Quoted 83 lines · Jun Li
Quoted 77 lines
-----Original Message-----
From: Mathias Nyman <[email protected]>
Sent: Thursday, September 3, 2020 5:39 PM
To: Jun Li <[email protected]>; [email protected]
Cc: [email protected]; [email protected]; dl-linux-imx <[email protected]>
Subject: Re: [PATCH v2] usb: xhci: add debugfs support for ep with streamQuoted 53 lines · Jun Li
Quoted 53 lines
-----Original Message-----
From: Mathias Nyman <[email protected]>
Sent: Thursday, September 3, 2020 3:24 PM
To: Jun Li <[email protected]>; [email protected]
Cc: [email protected]; [email protected]; dl-linux-imx <[email protected]>
Subject: Re: [PATCH v2] usb: xhci: add debugfs support for ep with streamQuoted 24 lines
Quoted 7 lines
I think this debugfs code is just called too early. It shouldn't need to check
new_ringpointer at all.I wrote a fix that changes the order and makes sure endpoint is enabled and ring pointer is set correctly before we call
xhci_debugfs_create_endpoint()Quoted 16 lines
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fg
it
.kernel.o rg%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Fmnyman%2Fxhci.git%2Fcommit% 2F
%3Fh%3Dfo r-usb-linus%26id%3Dcf99aef5624a592fd4f3374c7060bfa1a65f15df&dat a=
02%7C01%7 Cjun.li%40nxp.com%7C73e4663a6f6641fbb8b308d84f3d021a%7C686ea1d3bc2b 4c6fa92cd99c5c301635%7C0%7C0%7C637346470803922895&sdata=i4DfCW8EVUSAWnzb8Q l4
jPjAOD5wp
tfbaMrO8vKvtDc%3D&reserved=0Quoted 2 lines
This is a good place for non-zero Eps, but does not cover ep0.
ep0 is special, it's not touched in these add/drop endpoint or check bandwidth functions.
ep0 ring is allocated earlier during slot creation in
xhci_alloc_virt_device()
...
/* Allocate endpoint 0 ring */
dev->eps[0].ring = xhci_ring_alloc(xhci, 2, 1,TYPE_CTRL, 0,
flags);and for debugfs ep00 is added manually together with the slot
xhci_debugfs_create_slot()
...
xhci_debugfs_create_ring_dir(xhci, &dev->eps[0].ring, "ep00",priv->root);Quoted 8 lines
Quoted 1 line
So regarding ep0 the change should be ok.
Sorry, I forgot debugfs of ep0 is created via
xhci_debugfs_create_slot().Then I think your change is OK, also I gave a test with my stream/UAS device on top of your patch and it can work fine.
Do you need I post a new version of my
patch(to remove touch of .new_ring)?If you could yes, and also change to a double pointer:
struct xhci_ep_priv { ...Review
Quoted 1 line
(quoted diff) +1
-0+ struct xhci_ring **show_ring;With current: struct
xhci_ring*show_ring;
As I use one trb file to show different trb rings for one EP, so I need get the addr of trb ring pointed byshow_ring(which can be updated).
Quoted 3 lines
If I change it to be **show_ring, then I am passing the addr of dev->eps[i].ring to debugfs so I can't use show_ring's update value when show trb, makes me not easy to get the addr of target trb ring.
Right, ok, lets not use the douple pointer. We just have to trust epriv->show_ring is up to date.
-Mathias