Skip to contentSkip to conversation

scsi: ufs: Fix possible infinite loop in ufshcd_hold

PATCH Superseded Stanley Chu 3 participants 8 messages Jul 29, 2020 – Aug 7, 2020

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 scsi: ufs: Fix possible infinite loop in ufshcd_hold

In ufshcd_suspend(), after clk-gating is suspended and link is set as Hibern8 state, ufshcd_hold() is still possibly invoked before ufshcd_suspend() returns. For example, MediaTek's suspend vops may issue UIC commands which would call ufshcd_hold() during the command issuing flow.

Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled, then ufshcd_hold() may enter infinite loops because there is no clk-ungating work scheduled or pending. In this case, ufshcd_hold() shall just bypass, and keep the link as Hibern8 state.

---

Changes since v1:
- Fix return value: Use unique bool variable to get the result of flush_work(). Thcan prevent incorrect returned value, i.e., rc, if flush_work() returns true
- Fix commit message

---
 drivers/scsi/ufs/ufshcd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +4 -1
index 577cc0d7487f..acba2271c5d3 100644
@@ -1561,6 +1561,7 @@ static void ufshcd_ungate_work(struct work_struct *work)
 int ufshcd_hold(struct ufs_hba *hba, bool async)
 {
 	int rc = 0;
+	bool flush_result;
 	unsigned long flags;
 
 	if (!ufshcd_is_clkgating_allowed(hba))
@@ -1592,7 +1593,9 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
 				break;
 			}
 			spin_unlock_irqrestore(hba->host->host_lock, flags);
-			flush_work(&hba->clk_gating.ungate_work);
+			flush_result = flush_work(&hba->clk_gating.ungate_work);
+			if (hba->clk_gating.is_suspended && !flush_result)
+				goto out;
 			spin_lock_irqsave(hba->host->host_lock, flags);
 			goto start;
 		}
Signature · 1 line
2.18.0
#1 lore raw

Hi Stanley,

Quoted 11 lines · Stanley Chu

In ufshcd_suspend(), after clk-gating is suspended and link is set as Hibern8 state, ufshcd_hold() is still possibly invoked before ufshcd_suspend() returns. For example, MediaTek's suspend vops may issue UIC commands which would call ufshcd_hold() during the command issuing flow.

Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled, then ufshcd_hold() may enter infinite loops because there is no clk-ungating work scheduled or pending. In this case, ufshcd_hold() shall just bypass, and keep the link as Hibern8 state.

The infinite loop is expected as ufshcd_hold is called again after link is put to hibern8 state, so in QCOM's code, we never do this. The cap UFSHCD_CAP_HIBERN8_WITH_CLK_GATING means UIC link state must not be HIBERN8 after ufshcd_hold(async=false) returns.

Instead of bailing out from that loop, which makes the logic of ufshcd_hold and clk gating even more complex, how about removing ufshcd_hold/release from ufshcd_send_uic_cmd()? I think they are redundant and we should never send DME cmds if clocks/powers are not ready. I mean callers should make sure they are ready to send DME cmds (and only callers know when), but not leave that job to ufshcd_send_uic_cmd(). It is convenient to remove ufshcd_hold/ release from ufshcd_send_uic_cmd() as there are not many places sending DME cmds without holding the clocks, ufs_bsg.c is one. And I have tested my idea on my setup, it worked well for me. Another benefit is that it also allows us to use DME cmds in clk gating/ungating contexts if we need to in the future.

Please let me know your idea, thanks.

Can Guo.

Quoted 39 lines

---

Changes since v1:
- Fix return value: Use unique bool variable to get the result of flush_work(). Thcan prevent incorrect returned value, i.e., rc, if flush_work() returns true
- Fix commit message

---
 drivers/scsi/ufs/ufshcd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +1 -0
index 577cc0d7487f..acba2271c5d3 100644
@@ -1561,6 +1561,7 @@ static void ufshcd_ungate_work(struct work_struct 
 *work)
 int ufshcd_hold(struct ufs_hba *hba, bool async)
 {
 	int rc = 0;
+	bool flush_result;
 	unsigned long flags;
 
drivers/scsi/ufs/ufshcd.c +3 -1
 	if (!ufshcd_is_clkgating_allowed(hba))
@@ -1592,7 +1593,9 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
 				break;
 			}
 			spin_unlock_irqrestore(hba->host->host_lock, flags);
-			flush_work(&hba->clk_gating.ungate_work);
+			flush_result = flush_work(&hba->clk_gating.ungate_work);
+			if (hba->clk_gating.is_suspended && !flush_result)
+				goto out;
 			spin_lock_irqsave(hba->host->host_lock, flags);
 			goto start;
 		}
#2 lore raw

Hi Can,

Quoted 9 lines · Can Guo

Hi Stanley,

Quoted 6 lines · Stanley Chu

In ufshcd_suspend(), after clk-gating is suspended and link is set as Hibern8 state, ufshcd_hold() is still possibly invoked before ufshcd_suspend() returns. For example, MediaTek's suspend vops may issue UIC commands which would call ufshcd_hold() during the command issuing flow.

Quoted 8 lines
Quoted 5 lines

Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled, then ufshcd_hold() may enter infinite loops because there is no clk-ungating work scheduled or pending. In this case, ufshcd_hold() shall just bypass, and keep the link as Hibern8 state.

The infinite loop is expected as ufshcd_hold is called again after link is put to hibern8 state, so in QCOM's code, we never do this.

Sadly MediaTek have to do this to make our UniPro to enter low-power mode.

Quoted 2 lines

The cap UFSHCD_CAP_HIBERN8_WITH_CLK_GATING means UIC link state must not be HIBERN8 after ufshcd_hold(async=false) returns.

If driver is not in PM scenarios, e.g., suspended, above statement shall be always followed. But two obvious violations are existed,

1. In ufshcd_suspend(), link is set as HIBERN8 behind ufshcd_hold()
2. In ufshcd_resume(), link is set back as Active before ufshcd_release() is invoked

So as my understanding, special conditions are allowed in PM scenarios, and this is why "hba->clk_gating.is_suspended" is introduced. By this thought, I used "hba->clk_gating.is_suspended" in this patch as the mandatory condition to allow ufshcd_hold() usage in vendor suspend and resume callbacks.

Quoted 4 lines

Instead of bailing out from that loop, which makes the logic of ufshcd_hold and clk gating even more complex, how about removing ufshcd_hold/release from ufshcd_send_uic_cmd()? I think they are redundant and we should never send DME cmds if clocks/powers are

Quoted 9 lines

not ready. I mean callers should make sure they are ready to send DME cmds (and only callers know when), but not leave that job to ufshcd_send_uic_cmd(). It is convenient to remove ufshcd_hold/ release from ufshcd_send_uic_cmd() as there are not many places sending DME cmds without holding the clocks, ufs_bsg.c is one. And I have tested my idea on my setup, it worked well for me. Another benefit is that it also allows us to use DME cmds in clk gating/ungating contexts if we need to in the future.

Brilliant idea! But this may not solve problems if vendor callbacks need more than UIC commands in the future.

This simple patch could make all vendor operations on UFSHCI in PM callbacks possible with UFSHCD_CAP_HIBERN8_WITH_CLK_GATING enabled, and again, it allows those operations in PM scenarios only.

Quoted 3 lines

Please let me know your idea, thanks.

Can Guo.

Thanks,
Stanley Chu

Quoted 40 lines
Quoted 40 lines

---

Changes since v1:
- Fix return value: Use unique bool variable to get the result of flush_work(). Thcan prevent incorrect returned value, i.e., rc, if flush_work() returns true
- Fix commit message

---
 drivers/scsi/ufs/ufshcd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +1 -0
index 577cc0d7487f..acba2271c5d3 100644
@@ -1561,6 +1561,7 @@ static void ufshcd_ungate_work(struct work_struct 
 *work)
 int ufshcd_hold(struct ufs_hba *hba, bool async)
 {
 	int rc = 0;
+	bool flush_result;
 	unsigned long flags;
 
drivers/scsi/ufs/ufshcd.c +3 -1
 	if (!ufshcd_is_clkgating_allowed(hba))
@@ -1592,7 +1593,9 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
 				break;
 			}
 			spin_unlock_irqrestore(hba->host->host_lock, flags);
-			flush_work(&hba->clk_gating.ungate_work);
+			flush_result = flush_work(&hba->clk_gating.ungate_work);
+			if (hba->clk_gating.is_suspended && !flush_result)
+				goto out;
 			spin_lock_irqsave(hba->host->host_lock, flags);
 			goto start;
 		}
#3 lore raw

Hi Stanley,

Quoted 55 lines · Stanley Chu

Hi Can,

Quoted 9 lines · Can Guo

Hi Stanley,

Quoted 6 lines · Stanley Chu

In ufshcd_suspend(), after clk-gating is suspended and link is set as Hibern8 state, ufshcd_hold() is still possibly invoked before ufshcd_suspend() returns. For example, MediaTek's suspend vops may issue UIC commands which would call ufshcd_hold() during the command issuing flow.

Quoted 8 lines
Quoted 5 lines

Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled, then ufshcd_hold() may enter infinite loops because there is no clk-ungating work scheduled or pending. In this case, ufshcd_hold() shall just bypass, and keep the link as Hibern8 state.

The infinite loop is expected as ufshcd_hold is called again after link is put to hibern8 state, so in QCOM's code, we never do this.

Sadly MediaTek have to do this to make our UniPro to enter low-power mode.

Quoted 2 lines

The cap UFSHCD_CAP_HIBERN8_WITH_CLK_GATING means UIC link state must not be HIBERN8 after ufshcd_hold(async=false) returns.

If driver is not in PM scenarios, e.g., suspended, above statement shall be always followed. But two obvious violations are existed,

1. In ufshcd_suspend(), link is set as HIBERN8 behind ufshcd_hold()
2. In ufshcd_resume(), link is set back as Active before ufshcd_release() is invoked

So as my understanding, special conditions are allowed in PM scenarios, and this is why "hba->clk_gating.is_suspended" is introduced. By this thought, I used "hba->clk_gating.is_suspended" in this patch as the mandatory condition to allow ufshcd_hold() usage in vendor suspend and resume callbacks.

Quoted 4 lines

Instead of bailing out from that loop, which makes the logic of ufshcd_hold and clk gating even more complex, how about removing ufshcd_hold/release from ufshcd_send_uic_cmd()? I think they are redundant and we should never send DME cmds if clocks/powers are

Quoted 9 lines

not ready. I mean callers should make sure they are ready to send DME cmds (and only callers know when), but not leave that job to ufshcd_send_uic_cmd(). It is convenient to remove ufshcd_hold/ release from ufshcd_send_uic_cmd() as there are not many places sending DME cmds without holding the clocks, ufs_bsg.c is one. And I have tested my idea on my setup, it worked well for me. Another benefit is that it also allows us to use DME cmds in clk gating/ungating contexts if we need to in the future.

Quoted 7 lines

Brilliant idea! But this may not solve problems if vendor callbacks need more than UIC commands in the future.

This simple patch could make all vendor operations on UFSHCI in PM callbacks possible with UFSHCD_CAP_HIBERN8_WITH_CLK_GATING enabled, and again, it allows those operations in PM scenarios only.

Other than UIC cmds, I can only think of device manangement cmds (like query). If device management cmds come into the way in the future, we fix it as well. I mean that is the right thing to do in my opinion - just like we don't call pm_runtime_get_sync() in ufshcd_send_uic_cmd().

I can understand that you want a simple/quick fix to get it work for you once for all, but from my point of view, debugging clk gating/ungating really takes huge efforts sometime (I've spent a lot of time on it). Some flash vendors also use it in their own driver widely which makes some failure scenes even harder to undertand/debug. So the first thing comes to my head is that we should avoid making it more complex or giving it more exceptions.

From functionality point of view, it looks ok to me. It is just that I cannot predict it won't cause new problems since the clk gating/ungating sequeces are like magic in some use cases sometime.

Thanks,

Can Guo.

Quoted 47 lines
Quoted 3 lines

Please let me know your idea, thanks.

Can Guo.

Thanks,
Stanley Chu

Quoted 40 lines
Quoted 40 lines

---

Changes since v1:
- Fix return value: Use unique bool variable to get the result of flush_work(). Thcan prevent incorrect returned value, i.e., rc, if flush_work() returns true
- Fix commit message

---
 drivers/scsi/ufs/ufshcd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +1 -0
index 577cc0d7487f..acba2271c5d3 100644
@@ -1561,6 +1561,7 @@ static void ufshcd_ungate_work(struct work_struct
 *work)
 int ufshcd_hold(struct ufs_hba *hba, bool async)
 {
 	int rc = 0;
+	bool flush_result;
 	unsigned long flags;
 
drivers/scsi/ufs/ufshcd.c +3 -1
 	if (!ufshcd_is_clkgating_allowed(hba))
@@ -1592,7 +1593,9 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
 				break;
 			}
 			spin_unlock_irqrestore(hba->host->host_lock, flags);
-			flush_work(&hba->clk_gating.ungate_work);
+			flush_result = flush_work(&hba->clk_gating.ungate_work);
+			if (hba->clk_gating.is_suspended && !flush_result)
+				goto out;
 			spin_lock_irqsave(hba->host->host_lock, flags);
 			goto start;
 		}
#4 lore raw

Hi Can,

Quoted 88 lines · Can Guo

Hi Stanley,

Quoted 56 lines · Stanley Chu

Hi Can,

Quoted 9 lines · Can Guo

Hi Stanley,

Quoted 6 lines · Stanley Chu

In ufshcd_suspend(), after clk-gating is suspended and link is set as Hibern8 state, ufshcd_hold() is still possibly invoked before ufshcd_suspend() returns. For example, MediaTek's suspend vops may issue UIC commands which would call ufshcd_hold() during the command issuing flow.

Quoted 8 lines
Quoted 5 lines

Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled, then ufshcd_hold() may enter infinite loops because there is no clk-ungating work scheduled or pending. In this case, ufshcd_hold() shall just bypass, and keep the link as Hibern8 state.

The infinite loop is expected as ufshcd_hold is called again after link is put to hibern8 state, so in QCOM's code, we never do this.

Sadly MediaTek have to do this to make our UniPro to enter low-power mode.

Quoted 2 lines

The cap UFSHCD_CAP_HIBERN8_WITH_CLK_GATING means UIC link state must not be HIBERN8 after ufshcd_hold(async=false) returns.

If driver is not in PM scenarios, e.g., suspended, above statement shall
be always followed. But two obvious violations are existed,

1. In ufshcd_suspend(), link is set as HIBERN8 behind ufshcd_hold()
2. In ufshcd_resume(), link is set back as Active before ufshcd_release() is invoked

So as my understanding, special conditions are allowed in PM scenarios, and this is why "hba->clk_gating.is_suspended" is introduced. By this thought, I used "hba->clk_gating.is_suspended" in this patch as the mandatory condition to allow ufshcd_hold() usage in vendor suspend and resume callbacks.

Quoted 4 lines

Instead of bailing out from that loop, which makes the logic of ufshcd_hold and clk gating even more complex, how about removing ufshcd_hold/release from ufshcd_send_uic_cmd()? I think they are redundant and we should never send DME cmds if clocks/powers are

Quoted 9 lines

not ready. I mean callers should make sure they are ready to send DME cmds (and only callers know when), but not leave that job to ufshcd_send_uic_cmd(). It is convenient to remove ufshcd_hold/ release from ufshcd_send_uic_cmd() as there are not many places sending DME cmds without holding the clocks, ufs_bsg.c is one. And I have tested my idea on my setup, it worked well for me. Another benefit is that it also allows us to use DME cmds in clk gating/ungating contexts if we need to in the future.

Quoted 8 lines

Brilliant idea! But this may not solve problems if vendor callbacks need
more than UIC commands in the future.

This simple patch could make all vendor operations on UFSHCI in PM callbacks possible with UFSHCD_CAP_HIBERN8_WITH_CLK_GATING enabled, and again, it allows those operations in PM scenarios only.

Other than UIC cmds, I can only think of device manangement cmds (like query).
If device management cmds come into the way in the future, we fix it as well.
I mean that is the right thing to do in my opinion - just like we don't call
pm_runtime_get_sync() in ufshcd_send_uic_cmd().

I can understand that you want a simple/quick fix to get it work for you once
for all, but from my point of view, debugging clk gating/ungating really takes
huge efforts sometime (I've spent a lot of time on it). Some flash vendors also
use it in their own driver widely which makes some failure scenes even harder to
undertand/debug. So the first thing comes to my head is that we should avoid
making it more complex or giving it more exceptions.

Quoted 5 lines

From functionality point of view, it looks ok to me. It is just that I
cannot
predict it won't cause new problems since the clk gating/ungating sequeces are
like magic in some use cases sometime.

Thanks for the functionality review.

I totally understand what you mentioned above about the clk-gating debugging because we also spent lots of time for issue analysis.

I just finished some fault injection for this patch in our platform, the results are fine.

The active window of this patch is limited: Starting from ufshcd_link_state_transition() in ufshcd_suspend to ufshcd_vops_resume() in ufshcd_resume() because the link is back to LINKUP state in MediaTek resume callback. So I was focus on injecting errors in our callbacks between this period and most of injected fails triggered host and device reset flow.

For example,
Suspend: UniPro PowerDownControl timeout
Resume: hba_enable timeout
Resume: UniPro PowerDownControl timeout
Resume: HIBERN8 Exit timeout

Hope these tests can ease your concerns.

Thanks,
Stanley Chu

Quoted 52 lines

Thanks,

Can Guo.

Quoted 47 lines
Quoted 3 lines

Please let me know your idea, thanks.

Can Guo.

Thanks,
Stanley Chu

Quoted 40 lines
Quoted 40 lines

---

Changes since v1:
- Fix return value: Use unique bool variable to get the result of flush_work(). Thcan prevent incorrect returned value, i.e., rc, if flush_work() returns true
- Fix commit message

---
 drivers/scsi/ufs/ufshcd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +1 -0
index 577cc0d7487f..acba2271c5d3 100644
@@ -1561,6 +1561,7 @@ static void ufshcd_ungate_work(struct work_struct
 *work)
 int ufshcd_hold(struct ufs_hba *hba, bool async)
 {
 	int rc = 0;
+	bool flush_result;
 	unsigned long flags;
 
drivers/scsi/ufs/ufshcd.c +3 -1
 	if (!ufshcd_is_clkgating_allowed(hba))
@@ -1592,7 +1593,9 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
 				break;
 			}
 			spin_unlock_irqrestore(hba->host->host_lock, flags);
-			flush_work(&hba->clk_gating.ungate_work);
+			flush_result = flush_work(&hba->clk_gating.ungate_work);
+			if (hba->clk_gating.is_suspended && !flush_result)
+				goto out;
 			spin_lock_irqsave(hba->host->host_lock, flags);
 			goto start;
 		}
#5 lore raw

Hi Avri,

Would you have any suggestions for this patch?

We need this patch to enable UFSHCD_CAP_HIBERN8_WITH_CLK_GATING in MediaTek platform.

Thanks a lot,

Stanley Chu

Quoted 163 lines · Stanley Chu

Hi Can,

Quoted 88 lines · Can Guo

Hi Stanley,

Quoted 56 lines · Stanley Chu

Hi Can,

Quoted 9 lines · Can Guo

Hi Stanley,

Quoted 6 lines · Stanley Chu

In ufshcd_suspend(), after clk-gating is suspended and link is set as Hibern8 state, ufshcd_hold() is still possibly invoked before ufshcd_suspend() returns. For example, MediaTek's suspend vops may issue UIC commands which would call ufshcd_hold() during the command issuing flow.

Quoted 8 lines
Quoted 5 lines

Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled, then ufshcd_hold() may enter infinite loops because there is no clk-ungating work scheduled or pending. In this case, ufshcd_hold() shall just bypass, and keep the link as Hibern8 state.

The infinite loop is expected as ufshcd_hold is called again after link is put to hibern8 state, so in QCOM's code, we never do this.

Sadly MediaTek have to do this to make our UniPro to enter low-power mode.

Quoted 2 lines

The cap UFSHCD_CAP_HIBERN8_WITH_CLK_GATING means UIC link state must not be HIBERN8 after ufshcd_hold(async=false) returns.

If driver is not in PM scenarios, e.g., suspended, above statement shall
be always followed. But two obvious violations are existed,

1. In ufshcd_suspend(), link is set as HIBERN8 behind ufshcd_hold()
2. In ufshcd_resume(), link is set back as Active before ufshcd_release() is invoked

So as my understanding, special conditions are allowed in PM scenarios, and this is why "hba->clk_gating.is_suspended" is introduced. By this thought, I used "hba->clk_gating.is_suspended" in this patch as the mandatory condition to allow ufshcd_hold() usage in vendor suspend and resume callbacks.

Quoted 4 lines

Instead of bailing out from that loop, which makes the logic of ufshcd_hold and clk gating even more complex, how about removing ufshcd_hold/release from ufshcd_send_uic_cmd()? I think they are redundant and we should never send DME cmds if clocks/powers are

Quoted 9 lines

not ready. I mean callers should make sure they are ready to send DME cmds (and only callers know when), but not leave that job to ufshcd_send_uic_cmd(). It is convenient to remove ufshcd_hold/ release from ufshcd_send_uic_cmd() as there are not many places sending DME cmds without holding the clocks, ufs_bsg.c is one. And I have tested my idea on my setup, it worked well for me. Another benefit is that it also allows us to use DME cmds in clk gating/ungating contexts if we need to in the future.

Quoted 8 lines

Brilliant idea! But this may not solve problems if vendor callbacks need
more than UIC commands in the future.

This simple patch could make all vendor operations on UFSHCI in PM callbacks possible with UFSHCD_CAP_HIBERN8_WITH_CLK_GATING enabled, and again, it allows those operations in PM scenarios only.

Other than UIC cmds, I can only think of device manangement cmds (like query).
If device management cmds come into the way in the future, we fix it as well.
I mean that is the right thing to do in my opinion - just like we don't call
pm_runtime_get_sync() in ufshcd_send_uic_cmd().

I can understand that you want a simple/quick fix to get it work for you once
for all, but from my point of view, debugging clk gating/ungating really takes
huge efforts sometime (I've spent a lot of time on it). Some flash vendors also
use it in their own driver widely which makes some failure scenes even harder to
undertand/debug. So the first thing comes to my head is that we should avoid
making it more complex or giving it more exceptions.

Quoted 5 lines

From functionality point of view, it looks ok to me. It is just that I
cannot
predict it won't cause new problems since the clk gating/ungating sequeces are
like magic in some use cases sometime.

Thanks for the functionality review.

I totally understand what you mentioned above about the clk-gating debugging because we also spent lots of time for issue analysis.

I just finished some fault injection for this patch in our platform, the results are fine.

The active window of this patch is limited: Starting from ufshcd_link_state_transition() in ufshcd_suspend to ufshcd_vops_resume() in ufshcd_resume() because the link is back to LINKUP state in MediaTek resume callback. So I was focus on injecting errors in our callbacks between this period and most of injected fails triggered host and device reset flow.

For example,
Suspend: UniPro PowerDownControl timeout
Resume: hba_enable timeout
Resume: UniPro PowerDownControl timeout
Resume: HIBERN8 Exit timeout

Hope these tests can ease your concerns.

Thanks,
Stanley Chu

Quoted 40 lines

Thanks,

Can Guo.

Quoted 35 lines
Quoted 3 lines

Please let me know your idea, thanks.

Can Guo.

Thanks,
Stanley Chu

Quoted 28 lines
Quoted 28 lines

---

Changes since v1:
- Fix return value: Use unique bool variable to get the result of flush_work(). Thcan prevent incorrect returned value, i.e., rc, if flush_work() returns true
- Fix commit message

---
 drivers/scsi/ufs/ufshcd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +1 -0
index 577cc0d7487f..acba2271c5d3 100644
@@ -1561,6 +1561,7 @@ static void ufshcd_ungate_work(struct work_struct
 *work)
 int ufshcd_hold(struct ufs_hba *hba, bool async)
 {
 	int rc = 0;
+	bool flush_result;
 	unsigned long flags;
 
Quoted 13 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
drivers/scsi/ufs/ufshcd.c +0 -0
 	if (!ufshcd_is_clkgating_allowed(hba))
@@ -1592,7 +1593,9 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
 				break;
 			}
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

drivers/scsi/ufs/ufshcd.c int ufshcd_hold(struct ufs_hba *hba, bool async) · line 1601

Quoted 8 lines
drivers/scsi/ufs/ufshcd.c +3 -1
 			spin_unlock_irqrestore(hba->host->host_lock, flags);
-			flush_work(&hba->clk_gating.ungate_work);
+			flush_result = flush_work(&hba->clk_gating.ungate_work);
+			if (hba->clk_gating.is_suspended && !flush_result)
+				goto out;
 			spin_lock_irqsave(hba->host->host_lock, flags);
 			goto start;
 		}

_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Reviewed-by
#6 lore raw
Quoted 11 lines

Hi Avri,

Would you have any suggestions for this patch?

We need this patch to enable UFSHCD_CAP_HIBERN8_WITH_CLK_GATING in MediaTek platform.

Thanks a lot,

Stanley Chu

Let's use it for now as a short-term WA.
Please work with Can on a proper fix that will utilize his idea to remove ufshcd_hold/release From ufshcd_send_uic_cmd, as you are both in agreement that this should work as the long term solution.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek

#7 lore raw

Hi Avri,

Quoted 17 lines · Avri Altman
Quoted 10 lines

Hi Avri,

Would you have any suggestions for this patch?

We need this patch to enable UFSHCD_CAP_HIBERN8_WITH_CLK_GATING in MediaTek platform.

Thanks a lot,

Stanley Chu

Let's use it for now as a short-term WA.
Please work with Can on a proper fix that will utilize his idea to remove ufshcd_hold/release From ufshcd_send_uic_cmd, as you are both in agreement that this should work as the long term solution.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 3 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

Thanks!

I will continue with the long term solution with Can.

BTW, this mail seems not showing up in LKML or Patchwork, just reply this mail with removing "[SPAM]" keyword in title.

Thanks,
Stanley Chu