powerpc/pseries: group lmb operation and memblock's
Subsystems (3)
PATCH v4 1/2 powerpc/pseries: group lmb operation and memblock's
This patch prepares for the incoming patch which swaps the order of KOBJ_ADD/REMOVE uevent and dt's updating.
The dt updating should come after lmb operations, and before __remove_memory()/__add_memory(). Accordingly, grouping all lmb operations before the memblock's.
To: [email protected]
---
v3 -> v4: improve commit log
arch/powerpc/platforms/pseries/hotplug-memory.c | 26 ++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-)
arch/powerpc/platforms/pseries/hotplug-memory.c +17 -9
@@ -355,7 +355,8 @@ static int dlpar_add_lmb(struct drmem_lmb *);static int dlpar_remove_lmb (struct drmem_lmb *lmb) {unsigned long block_sz; -int rc; +phys_addr_t base_addr; +int rc, nid;if (!lmb_is_removable (lmb))return -EINVAL ;
@@ -364,17 +365,19 @@ static int dlpar_remove_lmb(struct drmem_lmb *lmb)if (rc)return rc; + base_addr = lmb->base_addr; + nid = lmb->nid; block_sz =pseries_memory_block_size (); -__remove_memory (lmb->nid, lmb->base_addr, block_sz); - -/* Update memory regions for memory remove */ -memblock_remove (lmb->base_addr, block_sz); -invalidate_lmb_associativity_index (lmb);lmb_clear_nid (lmb); lmb->flags &= ~DRCONF_MEM_ASSIGNED ; +__remove_memory (nid, base_addr, block_sz); + +/* Update memory regions for memory remove */ +memblock_remove (base_addr, block_sz); +return 0 ; }
@@ -603,6 +606,8 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb) }lmb_set_nid (lmb); + lmb->flags |=DRCONF_MEM_ASSIGNED ; + block_sz =memory_block_size_bytes ();/* Add the memory */
@@ -614,11 +619,14 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb) rc =dlpar_online_lmb (lmb);if (rc) { -__remove_memory (lmb->nid, lmb->base_addr, block_sz); +int nid = lmb->nid; +phys_addr_t base_addr = lmb->base_addr; +invalidate_lmb_associativity_index (lmb);lmb_clear_nid (lmb); - }else { - lmb->flags |=DRCONF_MEM_ASSIGNED ; + lmb->flags &= ~DRCONF_MEM_ASSIGNED ; + +__remove_memory (nid, base_addr, block_sz); }return rc;
Signature · 7 lines
2.7.5 _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
PATCH v4 2/2 powerpc/pseries: update device tree before ejecting hotplug uevents
A bug is observed on pseries by taking the following steps on rhel:
-1. drmgr -c mem -r -q 5
-2. echo c > /proc/sysrq-trigger
And then, the failure looks like:
kdump: saving to /sysroot//var/crash/127.0.0.1-2020-01-16-02:06:14/
kdump: saving vmcore-dmesg.txt
kdump: saving vmcore-dmesg.txt complete
kdump: saving vmcore
Checking for memory holes : [ 0.0 %] / Checking for memory holes : [100.0 %] | Excluding unnecessary pages : [100.0 %] \ Copying data : [ 0.3 %] - eta: 38s[ 44.337636] hash-mmu: mm: Hashing failure ! EA=0x7fffba400000 access=0x8000000000000004 current=makedumpfile
[ 44.337663] hash-mmu: trap=0x300 vsid=0x13a109c ssize=1 base psize=2 psize 2 pte=0xc000000050000504 [ 44.337677] hash-mmu: mm: Hashing failure ! EA=0x7fffba400000 access=0x8000000000000004 current=makedumpfile [ 44.337692] hash-mmu: trap=0x300 vsid=0x13a109c ssize=1 base psize=2 psize 2 pte=0xc000000050000504 [ 44.337708] makedumpfile[469]: unhandled signal 7 at 00007fffba400000 nip 00007fffbbc4d7fc lr 000000011356ca3c code 2 [ 44.338548] Core dump to |/bin/false pipe failed
/lib/kdump-lib-initramfs.sh: line 98: 469 Bus error $CORE_COLLECTOR /proc/vmcore $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore-incomplete
kdump: saving vmcore failed
* Root cause *
After analyzing, it turns out that in the current implementation,
when hot-removing lmb, the KOBJ_REMOVE event ejects before the dt updating as the code __remove_memory() comes before drmem_update_dt().
So in kdump kernel, when read_from_oldmem() resorts to pSeries_lpar_hpte_insert() to install hpte, but fails with -2 due to non-exist pfn. And finally, low_hash_fault() raise SIGBUS to process, as it can be observed "Bus error"
From a viewpoint of listener and publisher, the publisher notifies the listener before data is ready. This introduces a problem where udev launches kexec-tools (due to KOBJ_REMOVE) and loads a stale dt before updating. And in capture kernel, makedumpfile will access the memory based on the stale dt info, and hit a SIGBUS error due to an un-existed lmb.
* Fix *
This bug is introduced by commit 063b8b1251fd ("powerpc/pseries/memory-hotplug: Only update DT once per memory DLPAR request"), which tried to combine all the dt updating into one.
To fix this issue, meanwhile not to introduce a quadratic runtime complexity by the model:
dlpar_memory_add_by_count
for_each_drmem_lmb <--
dlpar_add_lmb
drmem_update_dt(_v1|_v2)
for_each_drmem_lmb <--The dt should still be only updated once, and just before the last memory online/offline event is ejected to user space. Achieve this by tracing the num of lmb added or removed.
To: [email protected]
---
v3 -> v4: resolve a quadratic runtime complexity issue.
This series is applied on next-test branch
arch/powerpc/platforms/pseries/hotplug-memory.c | 88 ++++++++++++++++++------- 1 file changed, 66 insertions(+), 22 deletions(-)
arch/powerpc/platforms/pseries/hotplug-memory.c +66 -22
@@ -350,13 +350,13 @@ static bool lmb_is_removable(struct drmem_lmb *lmb)return true; } -static int dlpar_add_lmb (struct drmem_lmb *); +static int dlpar_add_lmb (struct drmem_lmb *lmb,bool dt_update); -static int dlpar_remove_lmb (struct drmem_lmb *lmb) +static int dlpar_remove_lmb (struct drmem_lmb *lmb,bool dt_update) {unsigned long block_sz;phys_addr_t base_addr; -int rc, nid; +int rc, ret, nid;if (!lmb_is_removable (lmb))return -EINVAL ;
@@ -372,6 +372,11 @@ static int dlpar_remove_lmb(struct drmem_lmb *lmb)invalidate_lmb_associativity_index (lmb);lmb_clear_nid (lmb); lmb->flags &= ~DRCONF_MEM_ASSIGNED ; +if (dt_update) { + ret =drmem_update_dt (); +if (ret) +pr_warn ("%s fail to update dt, but continue\n" , __func__); + }__remove_memory (nid, base_addr, block_sz);
@@ -387,6 +392,7 @@ static int dlpar_memory_remove_by_count(u32 lmbs_to_remove)int lmbs_removed =0 ;int lmbs_available =0 ;int rc; +bool dt_update = false;pr_info ("Attempting to hot-remove %d LMB(s)\n" , lmbs_to_remove);
@@ -409,7 +415,7 @@ static int dlpar_memory_remove_by_count(u32 lmbs_to_remove) }for_each_drmem_lmb (lmb) { - rc =dlpar_remove_lmb (lmb); + rc =dlpar_remove_lmb (lmb, dt_update);if (rc)continue ;
@@ -421,16 +427,27 @@ static int dlpar_memory_remove_by_count(u32 lmbs_to_remove) lmbs_removed++;if (lmbs_removed == lmbs_to_remove)break ; +/* combine dt updating */ +else if (lmbs_removed == lmbs_to_remove -1 ) + dt_update = true; }if (lmbs_removed != lmbs_to_remove) { +bool rollback_dt_update = false; +pr_err ("Memory hot-remove failed, adding LMB's back\n" );for_each_drmem_lmb (lmb) {if (!drmem_lmb_reserved (lmb))continue ; - rc =dlpar_add_lmb (lmb); +/* +* Even if dlpar_remove_lmb() fails to update dt, it is +* harmless to update dt here. +*/ +if (--lmbs_removed ==0 && dt_update) + rollback_dt_update = true; + rc =dlpar_add_lmb (lmb, rollback_dt_update);if (rc)pr_err ("Failed to add LMB back, drc index %x\n" , lmb->drc_index);
@@ -468,7 +485,7 @@ static int dlpar_memory_remove_by_index(u32 drc_index)for_each_drmem_lmb (lmb) {if (lmb->drc_index == drc_index) { lmb_found =1 ; - rc =dlpar_remove_lmb (lmb); + rc =dlpar_remove_lmb (lmb, true);if (!rc)dlpar_release_drc (lmb->drc_index);
@@ -493,6 +510,7 @@ static int dlpar_memory_remove_by_ic(u32 lmbs_to_remove, u32 drc_index)struct drmem_lmb *lmb, *start_lmb, *end_lmb;int lmbs_available =0 ;int rc; +bool dt_update = false;pr_info ("Attempting to hot-remove %u LMB(s) at %x\n" , lmbs_to_remove, drc_index);
@@ -519,7 +537,9 @@ static int dlpar_memory_remove_by_ic(u32 lmbs_to_remove, u32 drc_index)if (!(lmb->flags &DRCONF_MEM_ASSIGNED ))continue ; - rc =dlpar_remove_lmb (lmb); +if (lmb == end_lmb) + dt_update = true; + rc =dlpar_remove_lmb (lmb, dt_update);if (rc)break ;
@@ -527,14 +547,17 @@ static int dlpar_memory_remove_by_ic(u32 lmbs_to_remove, u32 drc_index) }if (rc) { -pr_err ("Memory indexed-count-remove failed, adding any removed LMBs\n" ); +bool rollback_dt_update = false; +pr_err ("Memory indexed-count-remove failed, adding any removed LMBs\n" );for_each_drmem_lmb_in_range (lmb, start_lmb, end_lmb) {if (!drmem_lmb_reserved (lmb))continue ; - - rc =dlpar_add_lmb (lmb); +/* Since in removing path, dt is only updated if lmb == end_lmb */ +if (lmb == end_lmb) + rollback_dt_update = true; + rc =dlpar_add_lmb (lmb, rollback_dt_update);if (rc)pr_err ("Failed to add LMB, drc index %x\n" , lmb->drc_index);
@@ -572,7 +595,7 @@ static inline int dlpar_memory_remove(struct pseries_hp_errorlog *hp_elog) {return -EOPNOTSUPP ; } -static int dlpar_remove_lmb (struct drmem_lmb *lmb) +static int dlpar_remove_lmb (struct drmem_lmb *lmb,bool dt_update) {return -EOPNOTSUPP ; }
@@ -591,10 +614,10 @@ static int dlpar_memory_remove_by_ic(u32 lmbs_to_remove, u32 drc_index) }#endif /* CONFIG_MEMORY_HOTREMOVE */ -static int dlpar_add_lmb (struct drmem_lmb *lmb) +static int dlpar_add_lmb (struct drmem_lmb *lmb,bool dt_update) {unsigned long block_sz; -int rc; +int rc, ret;if (lmb->flags &DRCONF_MEM_ASSIGNED )return -EINVAL ;
@@ -607,6 +630,11 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)lmb_set_nid (lmb); lmb->flags |=DRCONF_MEM_ASSIGNED ; +if (dt_update) { + ret =drmem_update_dt (); +if (ret) +pr_warn ("%s fail to update dt, but continue\n" , __func__); + } block_sz =memory_block_size_bytes ();
@@ -625,7 +653,11 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)invalidate_lmb_associativity_index (lmb);lmb_clear_nid (lmb); lmb->flags &= ~DRCONF_MEM_ASSIGNED ; - +if (dt_update) { + ret =drmem_update_dt (); +if (ret) +pr_warn ("%s fail to update dt during rollback, but continue\n" , __func__); + }__remove_memory (nid, base_addr, block_sz); }
@@ -638,6 +670,7 @@ static int dlpar_memory_add_by_count(u32 lmbs_to_add)int lmbs_available =0 ;int lmbs_added =0 ;int rc; +bool dt_update = false;pr_info ("Attempting to hot-add %d LMB(s)\n" , lmbs_to_add);
@@ -664,7 +697,7 @@ static int dlpar_memory_add_by_count(u32 lmbs_to_add)if (rc)continue ; - rc =dlpar_add_lmb (lmb); + rc =dlpar_add_lmb (lmb, dt_update);if (rc) {dlpar_release_drc (lmb->drc_index);continue ;
@@ -678,16 +711,23 @@ static int dlpar_memory_add_by_count(u32 lmbs_to_add) lmbs_added++;if (lmbs_added == lmbs_to_add)break ; +else if (lmbs_added == lmbs_to_add -1 ) + dt_update = true; }if (lmbs_added != lmbs_to_add) { +bool rollback_dt_update = false; +pr_err ("Memory hot-add failed, removing any added LMBs\n" );for_each_drmem_lmb (lmb) {if (!drmem_lmb_reserved (lmb))continue ; - rc =dlpar_remove_lmb (lmb); +if (--lmbs_added ==0 && dt_update) + rollback_dt_update = true; + + rc =dlpar_remove_lmb (lmb, rollback_dt_update);if (rc)pr_err ("Failed to remove LMB, drc index %x\n" , lmb->drc_index);
@@ -725,7 +765,7 @@ static int dlpar_memory_add_by_index(u32 drc_index) lmb_found =1 ; rc =dlpar_acquire_drc (lmb->drc_index);if (!rc) { - rc =dlpar_add_lmb (lmb); + rc =dlpar_add_lmb (lmb, true);if (rc)dlpar_release_drc (lmb->drc_index); }
@@ -751,6 +791,7 @@ static int dlpar_memory_add_by_ic(u32 lmbs_to_add, u32 drc_index)struct drmem_lmb *lmb, *start_lmb, *end_lmb;int lmbs_available =0 ;int rc; +bool dt_update = false;pr_info ("Attempting to hot-add %u LMB(s) at index %x\n" , lmbs_to_add, drc_index);
@@ -781,7 +822,9 @@ static int dlpar_memory_add_by_ic(u32 lmbs_to_add, u32 drc_index)if (rc)break ; - rc =dlpar_add_lmb (lmb); +if (lmb == end_lmb) + dt_update = true; + rc =dlpar_add_lmb (lmb, dt_update);if (rc) {dlpar_release_drc (lmb->drc_index);break ;
@@ -794,10 +837,14 @@ static int dlpar_memory_add_by_ic(u32 lmbs_to_add, u32 drc_index)pr_err ("Memory indexed-count-add failed, removing any added LMBs\n" );for_each_drmem_lmb_in_range (lmb, start_lmb, end_lmb) { +bool rollback_dt_update = false; +if (!drmem_lmb_reserved (lmb))continue ; - rc =dlpar_remove_lmb (lmb); +if (lmb == end_lmb) + rollback_dt_update = true; + rc =dlpar_remove_lmb (lmb, rollback_dt_update);if (rc)pr_err ("Failed to remove LMB, drc index %x\n" , lmb->drc_index);
@@ -877,9 +924,6 @@ int dlpar_memory(struct pseries_hp_errorlog *hp_elog)break ; } -if (!rc) - rc =drmem_update_dt (); -unlock_device_hotplug ();return rc; }
Signature · 7 lines
2.7.5 _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Re: [PATCHv4 2/2] powerpc/pseries: update device tree before ejecting hotplug uevents
Le 30/07/2020 à 15:33, Pingfan Liu a écrit :
Quoted 213 lines
A bug is observed on pseries by taking the following steps on rhel:
-1. drmgr -c mem -r -q 5
-2. echo c >/proc/sysrq-triggerAnd then, the failure looks like:
kdump: saving to /sysroot//var/crash/127.0.0.1-2020-01-16-02:06:14/
kdump: saving vmcore-dmesg.txt
kdump: saving vmcore-dmesg.txt complete
kdump: saving vmcore
Checking for memory holes : [ 0.0 %] / Checking for memory holes : [100.0 %] | Excluding unnecessary pages : [100.0 %] \ Copying data : [ 0.3 %] - eta: 38s[ 44.337636] hash-mmu: mm: Hashing failure ! EA=0x7fffba400000 access=0x8000000000000004 current=makedumpfile[ 44.337663] hash-mmu: trap=0x300 vsid=0x13a109c ssize=1 base psize=2 psize 2 pte=0xc000000050000504 [ 44.337677] hash-mmu: mm: Hashing failure ! EA=0x7fffba400000 access=0x8000000000000004 current=makedumpfile [ 44.337692] hash-mmu: trap=0x300 vsid=0x13a109c ssize=1 base psize=2 psize 2 pte=0xc000000050000504 [ 44.337708] makedumpfile[469]: unhandled signal 7 at 00007fffba400000 nip 00007fffbbc4d7fc lr 000000011356ca3c code 2 [ 44.338548] Core dump to |/bin/false pipe failed
/lib/kdump-lib-initramfs.sh: line 98: 469 Bus error $CORE_COLLECTOR/proc/vmcore$_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore-incomplete
kdump: saving vmcore failed* Root cause *
After analyzing, it turns out that in the current implementation,
when hot-removing lmb, theKOBJ_REMOVEevent ejects before the dt updating as the code__remove_memory()comes beforedrmem_update_dt().
So in kdump kernel, whenread_from_oldmem()resorts topSeries_lpar_hpte_insert()to install hpte, but fails with -2 due to non-exist pfn. And finally,low_hash_fault()raise SIGBUS to process, as it can be observed "Bus error"From a viewpoint of listener and publisher, the publisher notifies the
listener before data is ready. This introduces a problem where udev launches kexec-tools (due toKOBJ_REMOVE) and loads a stale dt before updating. And in capture kernel, makedumpfile will access the memory based on the stale dt info, and hit a SIGBUS error due to an un-existed lmb.* Fix *
This bug is introduced by commit063b8b1251fd("powerpc/pseries/memory-hotplug: Only update DT once per memory DLPAR request"), which tried to combine all the dt updating into one.To fix this issue, meanwhile not to introduce a quadratic runtime complexity by the model:
dlpar_memory_add_by_count for_each_drmem_lmb <-- dlpar_add_lmb drmem_update_dt(_v1|_v2) for_each_drmem_lmb <--The dt should still be only updated once, and just before the last memory online/offline event is ejected to user space. Achieve this by tracing the num of lmb added or removed.
Signed-off-by Pingfan Liu <[email protected]>Cc Michael Ellerman <[email protected]>Cc Hari Bathini <[email protected]>Cc Nathan Lynch <[email protected]>Cc Nathan Fontenot <[email protected]>To: [email protected]
---
v3 -> v4: resolve a quadratic runtime complexity issue.
This series is applied on next-test brancharch/powerpc/platforms/pseries/hotplug-memory.c | 88 ++++++++++++++++++------- 1 file changed, 66 insertions(+), 22 deletions(-)arch/powerpc/platforms/pseries/hotplug-memory.c +36
-13@@ -350,13 +350,13 @@ static bool lmb_is_removable(struct drmem_lmb *lmb)return true; } -static int dlpar_add_lmb (struct drmem_lmb *); +static int dlpar_add_lmb (struct drmem_lmb *lmb,bool dt_update); -static int dlpar_remove_lmb (struct drmem_lmb *lmb) +static int dlpar_remove_lmb (struct drmem_lmb *lmb,bool dt_update) {unsigned long block_sz;phys_addr_t base_addr; -int rc, nid; +int rc, ret, nid;if (!lmb_is_removable (lmb))return -EINVAL ;@@ -372,6 +372,11 @@ static int dlpar_remove_lmb(struct drmem_lmb *lmb)invalidate_lmb_associativity_index (lmb);lmb_clear_nid (lmb); lmb->flags &= ~DRCONF_MEM_ASSIGNED ; +if (dt_update) { + ret =drmem_update_dt (); +if (ret) +pr_warn ("%s fail to update dt, but continue\n" , __func__); + }__remove_memory (nid, base_addr, block_sz);@@ -387,6 +392,7 @@ static int dlpar_memory_remove_by_count(u32 lmbs_to_remove)int lmbs_removed =0 ;int lmbs_available =0 ;int rc; +bool dt_update = false;pr_info ("Attempting to hot-remove %d LMB(s)\n" , lmbs_to_remove);@@ -409,7 +415,7 @@ static int dlpar_memory_remove_by_count(u32 lmbs_to_remove) }for_each_drmem_lmb (lmb) { - rc =dlpar_remove_lmb (lmb); + rc =dlpar_remove_lmb (lmb, dt_update);if (rc)continue ;@@ -421,16 +427,27 @@ static int dlpar_memory_remove_by_count(u32 lmbs_to_remove) lmbs_removed++;if (lmbs_removed == lmbs_to_remove)break ; +/* combine dt updating */ +else if (lmbs_removed == lmbs_to_remove -1 ) + dt_update = true; }if (lmbs_removed != lmbs_to_remove) { +bool rollback_dt_update = false; +pr_err ("Memory hot-remove failed, adding LMB's back\n" );for_each_drmem_lmb (lmb) {if (!drmem_lmb_reserved (lmb))continue ; - rc =dlpar_add_lmb (lmb); +/* +* Even if dlpar_remove_lmb() fails to update dt, it is +* harmless to update dt here. +*/ +if (--lmbs_removed ==0 && dt_update) + rollback_dt_update = true; + rc =dlpar_add_lmb (lmb, rollback_dt_update);if (rc)pr_err ("Failed to add LMB back, drc index %x\n" , lmb->drc_index);@@ -468,7 +485,7 @@ static int dlpar_memory_remove_by_index(u32 drc_index)for_each_drmem_lmb (lmb) {if (lmb->drc_index == drc_index) { lmb_found =1 ; - rc =dlpar_remove_lmb (lmb); + rc =dlpar_remove_lmb (lmb, true);if (!rc)dlpar_release_drc (lmb->drc_index);@@ -493,6 +510,7 @@ static int dlpar_memory_remove_by_ic(u32 lmbs_to_remove, u32 drc_index)struct drmem_lmb *lmb, *start_lmb, *end_lmb;int lmbs_available =0 ;int rc; +bool dt_update = false;pr_info ("Attempting to hot-remove %u LMB(s) at %x\n" , lmbs_to_remove, drc_index);@@ -519,7 +537,9 @@ static int dlpar_memory_remove_by_ic(u32 lmbs_to_remove, u32 drc_index)if (!(lmb->flags &DRCONF_MEM_ASSIGNED ))continue ; - rc =dlpar_remove_lmb (lmb); +if (lmb == end_lmb) + dt_update = true; + rc =dlpar_remove_lmb (lmb, dt_update);if (rc)break ;@@ -527,14 +547,17 @@ static int dlpar_memory_remove_by_ic(u32 lmbs_to_remove, u32 drc_index) }if (rc) { -pr_err ("Memory indexed-count-remove failed, adding any removed LMBs\n" ); +bool rollback_dt_update = false; +pr_err ("Memory indexed-count-remove failed, adding any removed LMBs\n" );for_each_drmem_lmb_in_range (lmb, start_lmb, end_lmb) {if (!drmem_lmb_reserved (lmb))continue ; - - rc =dlpar_add_lmb (lmb); +/* Since in removing path, dt is only updated if lmb == end_lmb */ +if (lmb == end_lmb) + rollback_dt_update = true; + rc =dlpar_add_lmb (lmb, rollback_dt_update);if (rc)pr_err ("Failed to add LMB, drc index %x\n" , lmb->drc_index);@@ -572,7 +595,7 @@ static inline int dlpar_memory_remove(struct pseries_hp_errorlog *hp_elog) {return -EOPNOTSUPP ; } -static int dlpar_remove_lmb (struct drmem_lmb *lmb) +static int dlpar_remove_lmb (struct drmem_lmb *lmb,bool dt_update) {return -EOPNOTSUPP ; }@@ -591,10 +614,10 @@ static int dlpar_memory_remove_by_ic(u32 lmbs_to_remove, u32 drc_index) }#endif /* CONFIG_MEMORY_HOTREMOVE */ -static int dlpar_add_lmb (struct drmem_lmb *lmb) +static int dlpar_add_lmb (struct drmem_lmb *lmb,bool dt_update) {unsigned long block_sz; -int rc; +int rc, ret;if (lmb->flags &DRCONF_MEM_ASSIGNED )return -EINVAL ;
arch/powerpc/platforms/pseries/hotplug-memory.c static int dlpar_add_lmb(struct drmem_lmb *lmb) · line 639
Quoted 10 lines
arch/powerpc/platforms/pseries/hotplug-memory.c +5
-0@@ -607,6 +630,11 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)lmb_set_nid (lmb); lmb->flags |=DRCONF_MEM_ASSIGNED ; +if (dt_update) { + ret =drmem_update_dt (); +if (ret) +pr_warn ("%s fail to update dt, but continue\n" , __func__); + } block_sz =memory_block_size_bytes ();
In the case the call to __add_memory is failing, the flag DRCONF_MEM_ASSIGNED should be cleared as I mentioned in your previous patch. In addition to this, the DT should be updated, or the caller should manage that but that will be hard since it doesn't know where the error happened in this function.
Quoted 32 lines
arch/powerpc/platforms/pseries/hotplug-memory.c +7
-2@@ -625,7 +653,11 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)invalidate_lmb_associativity_index (lmb);lmb_clear_nid (lmb); lmb->flags &= ~DRCONF_MEM_ASSIGNED ; - +if (dt_update) { + ret =drmem_update_dt (); +if (ret) +pr_warn ("%s fail to update dt during rollback, but continue\n" , __func__); + }__remove_memory (nid, base_addr, block_sz); }@@ -638,6 +670,7 @@ static int dlpar_memory_add_by_count(u32 lmbs_to_add)int lmbs_available =0 ;int lmbs_added =0 ;int rc; +bool dt_update = false;pr_info ("Attempting to hot-add %d LMB(s)\n" , lmbs_to_add);@@ -664,7 +697,7 @@ static int dlpar_memory_add_by_count(u32 lmbs_to_add)if (rc)continue ; - rc =dlpar_add_lmb (lmb); + rc =dlpar_add_lmb (lmb, dt_update);if (rc) {dlpar_release_drc (lmb->drc_index);continue ;
arch/powerpc/platforms/pseries/hotplug-memory.c static int dlpar_memory_add_by_count(u32 lmbs_to_add) · line 715
Quoted 5 lines
arch/powerpc/platforms/pseries/hotplug-memory.c +2
-0@@ -678,16 +711,23 @@ static int dlpar_memory_add_by_count(u32 lmbs_to_add) lmbs_added++;if (lmbs_added == lmbs_to_add)break ; +else if (lmbs_added == lmbs_to_add -1 ) + dt_update = true;
In the case the number of LMB to add is 1, dt_update is never set to true, and the device tree is never updated. You need to set dt_update to true earlier in the loop block.
Quoted 4 lines
arch/powerpc/platforms/pseries/hotplug-memory.c +1
-0}if (lmbs_added != lmbs_to_add) { +bool rollback_dt_update = false;
arch/powerpc/platforms/pseries/hotplug-memory.c static int dlpar_memory_add_by_count(u32 lmbs_to_add) · line 728
Quoted 10 lines
arch/powerpc/platforms/pseries/hotplug-memory.c +3
-1+pr_err ("Memory hot-add failed, removing any added LMBs\n" );for_each_drmem_lmb (lmb) {if (!drmem_lmb_reserved (lmb))continue ; - rc =dlpar_remove_lmb (lmb); +if (--lmbs_added ==0 && dt_update) + rollback_dt_update = true;
That test may have to be review to deal with error during the last LMB addition, the DT may have been updated before __add_memory() is failing in dlpar_add_lmb(). In that case, lmbs_added == 0 and that branch is not covered. That's not an issue if dlpar_add_lmb() is handling that case (see my comment above).
Quoted 51 lines
arch/powerpc/platforms/pseries/hotplug-memory.c +12
-3+ + rc =dlpar_remove_lmb (lmb, rollback_dt_update);if (rc)pr_err ("Failed to remove LMB, drc index %x\n" , lmb->drc_index);@@ -725,7 +765,7 @@ static int dlpar_memory_add_by_index(u32 drc_index) lmb_found =1 ; rc =dlpar_acquire_drc (lmb->drc_index);if (!rc) { - rc =dlpar_add_lmb (lmb); + rc =dlpar_add_lmb (lmb, true);if (rc)dlpar_release_drc (lmb->drc_index); }@@ -751,6 +791,7 @@ static int dlpar_memory_add_by_ic(u32 lmbs_to_add, u32 drc_index)struct drmem_lmb *lmb, *start_lmb, *end_lmb;int lmbs_available =0 ;int rc; +bool dt_update = false;pr_info ("Attempting to hot-add %u LMB(s) at index %x\n" , lmbs_to_add, drc_index);@@ -781,7 +822,9 @@ static int dlpar_memory_add_by_ic(u32 lmbs_to_add, u32 drc_index)if (rc)break ; - rc =dlpar_add_lmb (lmb); +if (lmb == end_lmb) + dt_update = true; + rc =dlpar_add_lmb (lmb, dt_update);if (rc) {dlpar_release_drc (lmb->drc_index);break ;@@ -794,10 +837,14 @@ static int dlpar_memory_add_by_ic(u32 lmbs_to_add, u32 drc_index)pr_err ("Memory indexed-count-add failed, removing any added LMBs\n" );for_each_drmem_lmb_in_range (lmb, start_lmb, end_lmb) { +bool rollback_dt_update = false; +if (!drmem_lmb_reserved (lmb))continue ; - rc =dlpar_remove_lmb (lmb); +if (lmb == end_lmb) + rollback_dt_update = true; + rc =dlpar_remove_lmb (lmb, rollback_dt_update);if (rc)pr_err ("Failed to remove LMB, drc index %x\n" , lmb->drc_index);
arch/powerpc/platforms/pseries/hotplug-memory.c int dlpar_memory(struct pseries_hp_errorlog *hp_elog) · line 929
Quoted 9 lines
arch/powerpc/platforms/pseries/hotplug-memory.c +0
-3@@ -877,9 +924,6 @@ int dlpar_memory(struct pseries_hp_errorlog *hp_elog)break ; } -if (!rc) - rc =drmem_update_dt (); -unlock_device_hotplug ();return rc; }
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Re: [PATCHv4 2/2] powerpc/pseries: update device tree before ejecting hotplug uevents
Quoted 1 line · Laurent Dufour
[...]
Quoted 8 lines
Quoted 8 lines
lmb_set_nid(lmb); lmb->flags |= DRCONF_MEM_ASSIGNED;arch/powerpc/platforms/pseries/hotplug-memory.c +5
-0+if (dt_update) { + ret =drmem_update_dt (); +if (ret) +pr_warn ("%s fail to update dt, but continue\n" , __func__); + }
Quoted 4 lines
Quoted 1 line
block_sz = memory_block_size_bytes();In the case the call to
__add_memoryis failing, the flagDRCONF_MEM_ASSIGNEDshould be cleared as I mentioned in your previous patch. In addition to this,
Yes.
Quoted 2 lines
the DT should be updated, or the caller should manage that but that will be hard since it doesn't know where the error happened in this function.
Yeah, it is hard to manage it by caller, so just updating dt is a easier method.
Quoted 27 lines
Quoted 27 lines
arch/powerpc/platforms/pseries/hotplug-memory.c +6
-1@@ -625,7 +653,11 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)invalidate_lmb_associativity_index (lmb);lmb_clear_nid (lmb); lmb->flags &= ~DRCONF_MEM_ASSIGNED ; - +if (dt_update) { + ret =drmem_update_dt (); +if (ret) +pr_warn ("%s fail to update dt during rollback, but continue\n" , __func__); + }__remove_memory (nid, base_addr, block_sz); }@@ -638,6 +670,7 @@ static int dlpar_memory_add_by_count(u32 lmbs_to_add)int lmbs_available =0 ;int lmbs_added =0 ;int rc; +bool dt_update = false;pr_info ("Attempting to hot-add %d LMB(s)\n" , lmbs_to_add);@@ -664,7 +697,7 @@ static int dlpar_memory_add_by_count(u32 lmbs_to_add)if (rc)continue ;
Quoted 15 lines
arch/powerpc/platforms/pseries/hotplug-memory.c static int dlpar_memory_add_by_count(u32 lmbs_to_add) · line 715
Quoted 11 lines
arch/powerpc/platforms/pseries/hotplug-memory.c +3
-1- rc =dlpar_add_lmb (lmb); + rc =dlpar_add_lmb (lmb, dt_update);if (rc) {dlpar_release_drc (lmb->drc_index);continue ;@@ -678,16 +711,23 @@ static int dlpar_memory_add_by_count(u32 lmbs_to_add) lmbs_added++;if (lmbs_added == lmbs_to_add)break ; +else if (lmbs_added == lmbs_to_add -1 ) + dt_update = true;In the case the number of LMB to add is 1,
dt_updateis never set to true, and the device tree is never updated. You need to setdt_updateto true earlier in the loop block.
Oh, I will fix it in V5
Quoted 12 lines
Quoted 12 lines
arch/powerpc/platforms/pseries/hotplug-memory.c +2
-0}if (lmbs_added != lmbs_to_add) { +bool rollback_dt_update = false; +pr_err ("Memory hot-add failed, removing any added LMBs\n" );for_each_drmem_lmb (lmb) {if (!drmem_lmb_reserved (lmb))continue ;
Quoted 8 lines
arch/powerpc/platforms/pseries/hotplug-memory.c static int dlpar_memory_add_by_count(u32 lmbs_to_add) · line 728
Quoted 3 lines
arch/powerpc/platforms/pseries/hotplug-memory.c +2
-1- rc =dlpar_remove_lmb (lmb); +if (--lmbs_added ==0 && dt_update) + rollback_dt_update = true;That test may have to be review to deal with error during the last LMB addition, the DT may have been updated before
__add_memory()is failing indlpar_add_lmb(). In that case,lmbs_added== 0 and that branch is not covered. That's not an issue ifdlpar_add_lmb()is handling that case (see my comment above).
I will fix it in next version.
Thanks for your review.
Regards,
Pingfan
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
arch/powerpc/platforms/pseries/hotplug-memory.c static int dlpar_add_lmb(struct drmem_lmb *lmb) · line 613
Quoted 9 lines
arch/powerpc/platforms/pseries/hotplug-memory.c +2
-0@@ -603,6 +606,8 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb) }lmb_set_nid (lmb); + lmb->flags |=DRCONF_MEM_ASSIGNED ; + block_sz =memory_block_size_bytes ();/* Add the memory */
Since the lmb->flags is now set earlier, you should unset it in the case the call to __add_memory() fails, something like:
@@ -614,6 +614,7 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)
rc = __add_memory(lmb->nid, lmb->base_addr, block_sz); if (rc) {
invalidate_lmb_associativity_index(lmb);
+ lmb->flags &= ~DRCONF_MEM_ASSIGNED;
return rc;
}
Quoted 8 lines
arch/powerpc/platforms/pseries/hotplug-memory.c +3
-1@@ -614,11 +619,14 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb) rc =dlpar_online_lmb (lmb);if (rc) { -__remove_memory (lmb->nid, lmb->base_addr, block_sz); +int nid = lmb->nid; +phys_addr_t base_addr = lmb->base_addr; +
arch/powerpc/platforms/pseries/hotplug-memory.c static int dlpar_add_lmb(struct drmem_lmb *lmb) · line 632
Quoted 10 lines
arch/powerpc/platforms/pseries/hotplug-memory.c +3
-2invalidate_lmb_associativity_index (lmb);lmb_clear_nid (lmb); - }else { - lmb->flags |=DRCONF_MEM_ASSIGNED ; + lmb->flags &= ~DRCONF_MEM_ASSIGNED ; + +__remove_memory (nid, base_addr, block_sz); }return rc;
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Quoted 15 lines · Laurent Dufour
arch/powerpc/platforms/pseries/hotplug-memory.c static int dlpar_add_lmb(struct drmem_lmb *lmb) · line 613
Quoted 10 lines
arch/powerpc/platforms/pseries/hotplug-memory.c +2
-0@@ -603,6 +606,8 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb) }lmb_set_nid (lmb); + lmb->flags |=DRCONF_MEM_ASSIGNED ; + block_sz =memory_block_size_bytes ();/* Add the memory */ Since the
lmb->flagsis now set earlier, you should unset it in the case the call to__add_memory()fails, something like:
arch/powerpc/platforms/pseries/hotplug-memory.c static int dlpar_add_lmb(struct drmem_lmb *lmb) · line 617
Quoted 4 lines
arch/powerpc/platforms/pseries/hotplug-memory.c +1
-0@@ -614,6 +614,7 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb) rc =__add_memory (lmb->nid, lmb->base_addr, block_sz);if (rc) {invalidate_lmb_associativity_index (lmb); + lmb->flags &= ~DRCONF_MEM_ASSIGNED ;
You are right. I will fix it in V5.
Thanks,
Pingfan
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec