dt-bindings: fsl: Convert i.MX7ULP PM to json-schema
Subsystems (2)
PATCH 1/2 dt-bindings: fsl: Convert i.MX7ULP PM to json-schema
Convert the i.MX7ULP PM binding to DT schema format using json-schema.
Signed-off-by Anson Huang <[email protected]>
--- .../bindings/arm/freescale/fsl,imx7ulp-pm.txt | 23 ------------- .../bindings/arm/freescale/fsl,imx7ulp-pm.yaml | 40 ++++++++++++++++++++++ 2 files changed, 40 insertions(+), 23 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt deleted +0 -23
@@ -1,23 +0,0 @@ -Freescale i.MX7ULP Power Management Components ----------------------------------------------- - -The Multi-System Mode Controller (MSMC) is responsible for sequencing -the MCU into and out of all stop and run power modes. Specifically, it -monitors events to trigger transitions between power modes while -controlling the power, clocks, and memories of the MCU to achieve the -power consumption and functionality of that mode. - -The WFI or WFE instruction is used to invoke a Sleep, Deep Sleep or -Standby modes for either Cortex family. Run, Wait, and Stop are the -common terms used for the primary operating modes of Kinetis -microcontrollers. - -Required properties: -- compatible: Should be "fsl,imx7ulp-smc1". -- reg: Specifies base physical address and size of the register sets. - -Example: -smc1: smc1@40410000 { - compatible = "fsl,imx7ulp-smc1"; - reg = <0x40410000 0x1000>; -};
Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml new file +40 -0
@@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/freescale/fsl,imx7ulp-pm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX7ULP Power Management Components + +maintainers: + - A.s. Dong <[email protected]> + +description: | + The Multi-System Mode Controller (MSMC) is responsible for sequencing + the MCU into and out of all stop and run power modes. Specifically, it + monitors events to trigger transitions between power modes while + controlling the power, clocks, and memories of the MCU to achieve the + power consumption and functionality of that mode. + + The WFI or WFE instruction is used to invoke a Sleep, Deep Sleep or + Standby modes for either Cortex family. Run, Wait, and Stop are the + common terms used for the primary operating modes of Kinetis + microcontrollers. + +properties: + compatible: + const: fsl,imx7ulp-smc1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + smc1@40410000 { + compatible = "fsl,imx7ulp-smc1"; + reg = <0x40410000 0x1000>; + };
Signature · 1 line
2.7.4
PATCH 2/2 dt-bindings: fsl: Convert i.MX7ULP SIM to json-schema
Convert the i.MX7ULP SIM binding to DT schema format using json-schema.
Signed-off-by Anson Huang <[email protected]>
--- .../bindings/arm/freescale/fsl,imx7ulp-sim.txt | 16 ---------- .../bindings/arm/freescale/fsl,imx7ulp-sim.yaml | 36 ++++++++++++++++++++++ 2 files changed, 36 insertions(+), 16 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml
Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt deleted +0 -16
@@ -1,16 +0,0 @@ -Freescale i.MX7ULP System Integration Module ----------------------------------------------- -The system integration module (SIM) provides system control and chip configuration -registers. In this module, chip revision information is located in JTAG ID register, -and a set of registers have been made available in DGO domain for SW use, with the -objective to maintain its value between system resets. - -Required properties: -- compatible: Should be "fsl,imx7ulp-sim". -- reg: Specifies base physical address and size of the register sets. - -Example: -sim: sim@410a3000 { - compatible = "fsl,imx7ulp-sim", "syscon"; - reg = <0x410a3000 0x1000>; -};
Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml new file +36 -0
@@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/freescale/fsl,imx7ulp-sim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX7ULP System Integration Module + +maintainers: + - Anson Huang <[email protected]> + +description: | + The system integration module (SIM) provides system control and chip configuration + registers. In this module, chip revision information is located in JTAG ID register, + and a set of registers have been made available in DGO domain for SW use, with the + objective to maintain its value between system resets. + +properties: + compatible: + items: + - const: fsl,imx7ulp-sim + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + sim@410a3000 { + compatible = "fsl,imx7ulp-sim", "syscon"; + reg = <0x410a3000 0x1000>; + };
Signature · 1 line
2.7.4
Re: [PATCH 2/2] dt-bindings: fsl: Convert i.MX7ULP SIM to json-schema
Quoted 10 lines · Anson Huang
Convert the i.MX7ULP SIM binding to DT schema format using json-schema.
Signed-off-by Anson Huang <[email protected]>--- .../bindings/arm/freescale/fsl,imx7ulp-sim.txt | 16 ---------- .../bindings/arm/freescale/fsl,imx7ulp-sim.yaml | 36 ++++++++++++++++++++++ 2 files changed, 36 insertions(+), 16 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml
Applied, thanks!
Quoted 10 lines · Anson Huang
Convert the i.MX7ULP PM binding to DT schema format using json-schema.
Signed-off-by Anson Huang <[email protected]>--- .../bindings/arm/freescale/fsl,imx7ulp-pm.txt | 23 ------------- .../bindings/arm/freescale/fsl,imx7ulp-pm.yaml | 40 ++++++++++++++++++++++ 2 files changed, 40 insertions(+), 23 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
Applied, thanks!