tools/bootconfig: Add boot-time tracing script
Masami Hiramatsu
maintainerv2 cover tools/bootconfig: Add boot-time tracing script
Hi,
This is the 2nd version of the series to introduce scripts for the boot-time tracing. In this version, I just updated 4/6 according to Steve's comment.
Previous series is here:
https://lkml.kernel.org/r/159704847064.175360.3292152056631660862.stgit@devnote2
Thank you,
---
Masami Hiramatsu (6):
tools/bootconfig: Show bootconfig compact tree from bootconfig file tools/bootconfig: Add list option
tools/bootconfig: Make all functions static
tools/bootconfig: Add a script to generate ftrace shell-command from bootconfig tools/bootconfig: Add a script to generates bootconfig from ftrace tools/bootconfig: Add --init option for bconf2ftrace.sh
MAINTAINERS | 1 tools/bootconfig/main.c | 147 +++++++++++++----- tools/bootconfig/scripts/bconf2ftrace.sh | 199 ++++++++++++++++++++++++ tools/bootconfig/scripts/ftrace.sh | 109 +++++++++++++ tools/bootconfig/scripts/ftrace2bconf.sh | 244 ++++++++++++++++++++++++++++++ tools/bootconfig/scripts/xbc.sh | 57 +++++++ 6 files changed, 715 insertions(+), 42 deletions(-) create mode 100755 tools/bootconfig/scripts/bconf2ftrace.sh create mode 100644 tools/bootconfig/scripts/ftrace.sh create mode 100755 tools/bootconfig/scripts/ftrace2bconf.sh create mode 100644 tools/bootconfig/scripts/xbc.sh
--
Masami Hiramatsu (Linaro) <[email protected]>
Masami Hiramatsu
maintainerPATCH v2 1/6 tools/bootconfig: Show bootconfig compact tree from bootconfig file
Show the bootconfig compact tree from the bootconfig file instead of an initrd if the given file has no magic number and is smaller than 32KB.
User can use this for checking the syntax error or output checking before applying the bootconfig to initrd.
--- tools/bootconfig/main.c | 81 ++++++++++++++++++++++++++++++++++------------- 1 file changed, 58 insertions(+), 23 deletions(-)
tools/bootconfig/main.c +58 -23
@@ -195,10 +195,55 @@ int load_xbc_from_initrd(int fd, char **buf)return size; } +static void show_xbc_error (const char *data,const char *msg,int pos) +{ +int lin =1 , col, i; + +if (pos <0 ) { +pr_err ("Error: %s.\n" , msg); +return ; + } + +/* Note that pos starts from 0 but lin and col should start from 1. */ + col = pos +1 ; +for (i =0 ; i < pos; i++) { +if (data[i] =='\n' ) { + lin++; + col = pos - i; + } + } +pr_err ("Parse Error: %s at %d:%d\n" , msg, lin, col); + +} + +static int init_xbc_with_error (char *buf,int len) +{ +char *copy =strdup (buf); +const char *msg; +int ret, pos; + +if (!copy) +return -ENOMEM ; + + ret =xbc_init (buf, &msg, &pos); +if (ret <0 ) +show_xbc_error (copy, msg, pos); +free (copy); + +return ret; +} +int show_xbc (const char *path) {int ret, fd;char *buf =NULL ; +struct stat st; + + ret =stat (path, &st); +if (ret <0 ) { +pr_err ("Failed to stat %s: %d\n" , path, -errno); +return -errno; + } fd =open (path,O_RDONLY );if (fd <0 ) {
@@ -207,14 +252,24 @@ int show_xbc(const char *path) } ret =load_xbc_from_initrd (fd, &buf); +close (fd);if (ret <0 ) {pr_err ("Failed to load a boot config from initrd: %d\n" , ret); goto out; } +/* Assume a bootconfig file if it is enough small */ +if (ret ==0 && st.st_size <=XBC_DATA_MAX ) { + ret =load_xbc_file (path, &buf); +if (ret <0 ) { +pr_err ("Failed to load a boot config: %d\n" , ret); + goto out; + } +if (init_xbc_with_error (buf, ret) <0 ) + goto out; + }xbc_show_compact_tree (); ret =0 ; out: -close (fd);free (buf);return ret;
@@ -251,27 +306,6 @@ int delete_xbc(const char *path)return ret; } -static void show_xbc_error (const char *data,const char *msg,int pos) -{ -int lin =1 , col, i; - -if (pos <0 ) { -pr_err ("Error: %s.\n" , msg); -return ; - } - -/* Note that pos starts from 0 but lin and col should start from 1. */ - col = pos +1 ; -for (i =0 ; i < pos; i++) { -if (data[i] =='\n' ) { - lin++; - col = pos - i; - } - } -pr_err ("Parse Error: %s at %d:%d\n" , msg, lin, col); - -} -int apply_xbc (const char *path,const char *xbc_path) {u32 size, csum;
@@ -352,11 +386,12 @@ int apply_xbc(const char *path, const char *xbc_path)int usage (void ) {printf ("Usage: bootconfig [OPTIONS] <INITRD>\n" +"Or bootconfig <CONFIG>\n" " Apply, delete or show boot config to initrd.\n" " Options:\n" " -a <config>: Apply boot config to initrd\n" " -d : Delete boot config file from initrd\n\n" -" If no option is given, show current applied boot config.\n" ); +" If no option is given, show the bootconfig in the given file.\n" );return -1 ; }
Masami Hiramatsu
maintainerPATCH v2 2/6 tools/bootconfig: Add list option
In reply to Masami HiramatsuAdd list option (-l) to show the bootconfig in the list style. This is same output of /proc/bootconfig. So users can check how their bootconfig will be shown in procfs. This will help them to write a user-space script to parse the /proc/bootconfig.
--- tools/bootconfig/main.c | 52 ++++++++++++++++++++++++++++++++++++----------- 1 file changed, 40 insertions(+), 12 deletions(-)
tools/bootconfig/main.c +40 -12
@@ -14,18 +14,19 @@#include <linux/kernel.h> #include <linux/bootconfig.h> -static int xbc_show_value (struct xbc_node *node) +static int xbc_show_value (struct xbc_node *node,bool semicolon) { -const char *val; +const char *val, *eol;char q;int i =0 ; + eol = semicolon ?";\n" :"\n" ;xbc_array_for_each_value (node, val) {if (strchr (val,'"' )) q ='\'' ;else q ='"' ; -printf ("%c%s%c%s" , q, val, q, node->next ?", " :";\n" ); +printf ("%c%s%c%s" , q, val, q, node->next ?", " : eol); i++; }return i;
@@ -53,7 +54,7 @@ static void xbc_show_compact_tree(void)continue ; }else if (cnode &&xbc_node_is_value (cnode)) {printf ("%s = " ,xbc_node_get_data (node)); -xbc_show_value (cnode); +xbc_show_value (cnode, true); }else {printf ("%s;\n" ,xbc_node_get_data (node)); }
@@ -77,6 +78,26 @@ static void xbc_show_compact_tree(void) } } +static void xbc_show_list (void ) +{ +char key[XBC_KEYLEN_MAX ]; +struct xbc_node *leaf; +const char *val; +int ret =0 ; + +xbc_for_each_key_value (leaf, val) { + ret =xbc_node_compose_key (leaf, key,XBC_KEYLEN_MAX ); +if (ret <0 ) +break ; +printf ("%s = " , key); +if (!val || val[0 ] =='\0' ) { +printf ("\"\"\n" ); +continue ; + } +xbc_show_value (xbc_node_get_child (leaf), false); + } +} +/* Simple real checksum */ int checksum (unsigned char *buf,int len) {
@@ -233,7 +254,7 @@ static int init_xbc_with_error(char *buf, int len)return ret; } -int show_xbc (const char *path) +int show_xbc (const char *path,bool list) {int ret, fd;char *buf =NULL ;
@@ -267,7 +288,10 @@ int show_xbc(const char *path)if (init_xbc_with_error (buf, ret) <0 ) goto out; } -xbc_show_compact_tree (); +if (list) +xbc_show_list (); +else +xbc_show_compact_tree (); ret =0 ; out:free (buf);
@@ -390,7 +414,8 @@ int usage(void)" Apply, delete or show boot config to initrd.\n" " Options:\n" " -a <config>: Apply boot config to initrd\n" -" -d : Delete boot config file from initrd\n\n" +" -d : Delete boot config file from initrd\n" +" -l : list boot config in initrd or file\n\n" " If no option is given, show the bootconfig in the given file.\n");return -1 ; }
@@ -399,10 +424,10 @@ int main(int argc, char **argv) {char *path =NULL ;char *apply =NULL ; -bool delete = false; +bool delete = false, list = false;int opt; -while ((opt =getopt (argc, argv,"hda:" )) !=-1 ) { +while ((opt =getopt (argc, argv,"hda:l" )) !=-1 ) {switch (opt) {case 'd' : delete = true;
@@ -410,14 +435,17 @@ int main(int argc, char **argv)case 'a' : apply = optarg;break ; +case 'l' : + list = true; +break ;case 'h' :default :return usage (); } } -if (apply && delete) { -pr_err ("Error: You can not specify both -a and -d at once.\n" ); +if ((apply && delete) || (delete && list) || (apply && list)) { +pr_err ("Error: You can give one of -a, -d or -l at once.\n" );return usage (); }
@@ -433,5 +461,5 @@ int main(int argc, char **argv)else if (delete)return delete_xbc (path); -return show_xbc (path); +return show_xbc (path, list); }
Masami Hiramatsu
maintainerPATCH v2 3/6 tools/bootconfig: Make all functions static
In reply to Masami HiramatsuMake all functions static except for main(). This is just a cleanup.
--- tools/bootconfig/main.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
tools/bootconfig/main.c +8 -8
@@ -99,7 +99,7 @@ static void xbc_show_list(void) }/* Simple real checksum */ -int checksum (unsigned char *buf,int len) +static int checksum (unsigned char *buf,int len) {int i, sum =0 ;
@@ -111,7 +111,7 @@ int checksum(unsigned char *buf, int len)#define PAGE_SIZE 4096 -int load_xbc_fd (int fd,char **buf,int size) +static int load_xbc_fd (int fd,char **buf,int size) {int ret;
@@ -128,7 +128,7 @@ int load_xbc_fd(int fd, char **buf, int size) }/* Return the read size or -errno */ -int load_xbc_file (const char *path,char **buf) +static int load_xbc_file (const char *path,char **buf) {struct stat stat;int fd, ret;
@@ -147,7 +147,7 @@ int load_xbc_file(const char *path, char **buf)return ret; } -int load_xbc_from_initrd (int fd,char **buf) +static int load_xbc_from_initrd (int fd,char **buf) {struct stat stat;int ret;
@@ -254,7 +254,7 @@ static int init_xbc_with_error(char *buf, int len)return ret; } -int show_xbc (const char *path,bool list) +static int show_xbc (const char *path,bool list) {int ret, fd;char *buf =NULL ;
@@ -299,7 +299,7 @@ int show_xbc(const char *path, bool list)return ret; } -int delete_xbc (const char *path) +static int delete_xbc (const char *path) {struct stat stat;int ret =0 , fd, size;
@@ -330,7 +330,7 @@ int delete_xbc(const char *path)return ret; } -int apply_xbc (const char *path,const char *xbc_path) +static int apply_xbc (const char *path,const char *xbc_path) {u32 size, csum;char *buf, *data;
@@ -407,7 +407,7 @@ int apply_xbc(const char *path, const char *xbc_path)return ret; } -int usage (void ) +static int usage (void ) {printf ("Usage: bootconfig [OPTIONS] <INITRD>\n" "Or bootconfig <CONFIG>\n"
Masami Hiramatsu
maintainerPATCH v2 4/6 tools/bootconfig: Add a script to generate ftrace shell-command from bootconfig
In reply to Masami HiramatsuAdd a bconf2ftrace.sh under tools/bootconfig/scripts which generates a shell script to setup boot-time trace from bootconfig file for testing the bootconfig.
bconf2ftrace.sh will take a bootconfig file (includes boot-time tracing) and convert it into a shell-script which is almost same as the boot-time tracer does.
If --apply option is given, it also tries to apply those command to the running kernel, which requires the root privilege (or sudo).
For example, if you just want to confirm the shell commands, save the output as below.
# bconf2ftrace.sh ftrace.bconf > ftrace.sh
Or, you can apply it directly.
# bconf2ftrace.sh --apply ftrace.bconf
Note that some boot-time tracing parameters under kernel.* are not able to set via tracefs nor procfs (e.g. tp_printk, traceoff_on_warning.), so those are ignored.
---
Changes in v2
- Check the XBC_TMPFILE is a normal file before remove it and clear XBC_TMPFILE after removed in xbc_cleanup().
--- MAINTAINERS | 1 tools/bootconfig/scripts/bconf2ftrace.sh | 189 ++++++++++++++++++++++++++++++ tools/bootconfig/scripts/xbc.sh | 57 +++++++++ 3 files changed, 247 insertions(+) create mode 100755 tools/bootconfig/scripts/bconf2ftrace.sh create mode 100644 tools/bootconfig/scripts/xbc.sh
MAINTAINERS +1 -0
@@ -6506,6 +6506,7 @@ F: fs/proc/bootconfig.c F: include/linux/bootconfig.h F: lib/bootconfig.c F: tools/bootconfig/* +F: tools/bootconfig/scripts/* EXYNOS DP DRIVER M: Jingoo Han <[email protected]>
tools/bootconfig/scripts/bconf2ftrace.sh new file +189 -0
189 lines not on this page · raw message
tools/bootconfig/scripts/xbc.sh new file +57 -0
57 lines not on this page · raw message
Masami Hiramatsu
maintainerPATCH v2 5/6 tools/bootconfig: Add a script to generates bootconfig from ftrace
In reply to Masami HiramatsuAdd a ftrace2bconf.sh under tools/bootconfig/scripts which generates a bootconfig file from the current ftrace settings.
To read the ftrace settings, ftrace2bconf.sh requires the root privilege (or sudo). The ftrace2bconf.sh will output the bootconfig to stdout and error messages to stderr, so usually you'll run it as
# ftrace2bconf.sh > ftrace.bconf
Note that some ftrace configurations are not supported. For example, function-call/callgraph trace/notrace settings are not supported because the wildcard has been expanded and lost in the ftrace anymore.
--- tools/bootconfig/scripts/ftrace2bconf.sh | 244 ++++++++++++++++++++++++++++++ 1 file changed, 244 insertions(+) create mode 100755 tools/bootconfig/scripts/ftrace2bconf.sh
tools/bootconfig/scripts/ftrace2bconf.sh new file +244 -0
@@ -0,0 +1,244 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-only + +usage() { + echo "Dump boot-time tracing bootconfig from ftrace" + echo "Usage: $0 [--debug] [ > BOOTCONFIG-FILE]" + exit 1 +} + +DEBUG= +while [ x"$1" != x ]; do + case "$1" in + "--debug") + DEBUG=$1;; + -*) + usage + ;; + esac + shift 1 +done + +if [ x"$DEBUG" != x ]; then + set -x +fi + +TRACEFS=`grep -m 1 -w tracefs /proc/mounts | cut -f 2 -d " "` +if [ -z "$TRACEFS" ]; then + if ! grep -wq debugfs /proc/mounts; then + echo "Error: No tracefs/debugfs was mounted." + exit 1 + fi + TRACEFS=`grep -m 1 -w debugfs /proc/mounts | cut -f 2 -d " "`/tracing + if [ ! -d $TRACEFS ]; then + echo "Error: ftrace is not enabled on this kernel." 1>&2 + exit 1 + fi +fi + +######## main ######### + +set -e + +emit_kv() { # key =|+= value + echo "$@" +} + +global_options() { + val=`cat $TRACEFS/max_graph_depth` + [ $val != 0 ] && emit_kv kernel.fgraph_max_depth = $val + if grep -qv "^#" $TRACEFS/set_graph_function $TRACEFS/set_graph_notrace ; then + cat 1>&2 << EOF +# WARN: kernel.fgraph_filters and kernel.fgraph_notrace are not supported, since the wild card expression was expanded and lost from memory. +EOF + fi +} + +kprobe_event_options() { + cat $TRACEFS/kprobe_events | while read p args; do + case $p in + r*) + cat 1>&2 << EOF +# WARN: A return probe found but it is not supported by bootconfig. Skip it. +EOF + continue;; + esac + p=${p#*:} + event=${p#*/} + group=${p%/*} + if [ $group != "kprobes" ]; then + cat 1>&2 << EOF +# WARN: kprobes group name $group is changed to "kprobes" for bootconfig. +EOF + fi + emit_kv $PREFIX.event.kprobes.$event.probes += $args + done +} + +synth_event_options() { + cat $TRACEFS/synthetic_events | while read event fields; do + emit_kv $PREFIX.event.synthetic.$event.fields = `echo $fields | sed "s/;/,/g"` + done +} + +# Variables resolver +DEFINED_VARS= +UNRESOLVED_EVENTS= + +defined_vars() { # event-dir + grep "^hist" $1/trigger | grep -o ':[a-zA-Z0-9]*=' +} +referred_vars() { + grep "^hist" $1/trigger | grep -o '$[a-zA-Z0-9]*' +} + +per_event_options() { # event-dir + evdir=$1 + # Check the special event which has no filter and no trigger + [ ! -f $evdir/filter ] && return + + if grep -q "^hist:" $evdir/trigger; then + # hist action can refer the undefined variables + __vars=`defined_vars $evdir` + for v in `referred_vars $evdir`; do + if echo $DEFINED_VARS $__vars | grep -vqw ${v#$}; then + # $v is not defined yet, defer it + UNRESOLVED_EVENTS="$UNRESOLVED_EVENTS $evdir" + return; + fi + done + DEFINED_VARS="$DEFINED_VARS "`defined_vars $evdir` + fi + grep -v "^#" $evdir/trigger | while read action active; do + emit_kv $PREFIX.event.$group.$event.actions += \'$action\' + done + + # enable is not checked; this is done by set_event in the instance. + val=`cat $evdir/filter` + if [ "$val" != "none" ]; then + emit_kv $PREFIX.event.$group.$event.filter = "$val" + fi +} + +retry_unresolved() { + unresolved=$UNRESOLVED_EVENTS + UNRESOLVED_EVENTS= + for evdir in $unresolved; do + event=${evdir##*/} + group=${evdir%/*}; group=${group##*/} + per_event_options $evdir + done +} + +event_options() { + # PREFIX and INSTANCE must be set + if [ $PREFIX = "ftrace" ]; then + # define the dynamic events + kprobe_event_options + synth_event_options + fi + for group in `ls $INSTANCE/events/` ; do + [ ! -d $INSTANCE/events/$group ] && continue + for event in `ls $INSTANCE/events/$group/` ;do + [ ! -d $INSTANCE/events/$group/$event ] && continue + per_event_options $INSTANCE/events/$group/$event + done + done + retry=0 + while [ $retry -lt 3 ]; do + retry_unresolved + retry=$((retry + 1)) + done + if [ "$UNRESOLVED_EVENTS" ]; then + cat 1>&2 << EOF +! ERROR: hist triggers in $UNRESOLVED_EVENTS use some undefined variables. +EOF + fi +} + +is_default_trace_option() { # option +grep -qw $1 << EOF +print-parent +nosym-offset +nosym-addr +noverbose +noraw +nohex +nobin +noblock +trace_printk +annotate +nouserstacktrace +nosym-userobj +noprintk-msg-only +context-info +nolatency-format +record-cmd +norecord-tgid +overwrite +nodisable_on_free +irq-info +markers +noevent-fork +nopause-on-trace +function-trace +nofunction-fork +nodisplay-graph +nostacktrace +notest_nop_accept +notest_nop_refuse +EOF +} + +instance_options() { # [instance-name] + if [ $# -eq 0 ]; then + PREFIX="ftrace" + INSTANCE=$TRACEFS + else + PREFIX="ftrace.instance.$1" + INSTANCE=$TRACEFS/instances/$1 + fi + val= + for i in `cat $INSTANCE/trace_options`; do + is_default_trace_option $i && continue + val="$val, $i" + done + [ "$val" ] && emit_kv $PREFIX.options = "${val#,}" + val="local" + for i in `cat $INSTANCE/trace_clock` ; do + [ "${i#*]}" ] && continue + i=${i%]}; val=${i#[} + done + [ $val != "local" ] && emit_kv $PREFIX.trace_clock = $val + val=`cat $INSTANCE/buffer_size_kb` + if echo $val | grep -vq "expanded" ; then + emit_kv $PREFIX.buffer_size = $val"KB" + fi + if grep -q "is allocated" $INSTANCE/snapshot ; then + emit_kv $PREFIX.alloc_snapshot + fi + val=`cat $INSTANCE/tracing_cpumask` + if [ `echo $val | sed -e s/f//g`x != x ]; then + emit_kv $PREFIX.cpumask = $val + fi + + val= + for i in `cat $INSTANCE/set_event`; do + val="$val, $i" + done + [ "$val" ] && emit_kv $PREFIX.events = "${val#,}" + val=`cat $INSTANCE/current_tracer` + [ $val != nop ] && emit_kv $PREFIX.tracer = $val + if grep -qv "^#" $INSTANCE/set_ftrace_filter $INSTANCE/set_ftrace_notrace; then + cat 1>&2 << EOF +# WARN: kernel.ftrace.filters and kernel.ftrace.notrace are not supported, since the wild card expression was expanded and lost from memory. +EOF + fi + event_options +} + +global_options +instance_options +for i in `ls $TRACEFS/instances` ; do + instance_options $i +done
Masami Hiramatsu
maintainerPATCH v2 6/6 tools/bootconfig: Add --init option for bconf2ftrace.sh
In reply to Masami HiramatsuSince the ftrace current setting may conflict with the new setting from bootconfig, add the --init option to initialize ftrace before setting for bconf2ftrace.sh.
E.g.
$ bconf2ftrace.sh --init boottrace.bconf
This initialization method copied from selftests/ftrace.
--- tools/bootconfig/scripts/bconf2ftrace.sh | 12 +++ tools/bootconfig/scripts/ftrace.sh | 109 ++++++++++++++++++++++++++++++ 2 files changed, 120 insertions(+), 1 deletion(-) create mode 100644 tools/bootconfig/scripts/ftrace.sh
tools/bootconfig/scripts/bconf2ftrace.sh +11 -1
@@ -3,8 +3,9 @@ usage() { echo "Ftrace boottime trace test tool" - echo "Usage: $0 [--apply] [--debug] BOOTCONFIG-FILE" + echo "Usage: $0 [--apply|--init] [--debug] BOOTCONFIG-FILE" echo " --apply: Test actual apply to tracefs (need sudo)" + echo " --init: Initialize ftrace before applying (imply --apply)" exit 1 }
@@ -13,12 +14,16 @@ usage() { BCONF= DEBUG= APPLY= +INIT= while [ x"$1" != x ]; do case "$1" in "--debug") DEBUG=$1;; "--apply") APPLY=$1;; + "--init") + APPLY=$1 + INIT=$1;; *) [ ! -f $1 ] && usage BCONF=$1;;
@@ -57,6 +62,11 @@ if [ -z "$TRACEFS" ]; then fi fi +if [ x"$INIT" != x ]; then + . `dirname $0`/ftrace.sh + (cd $TRACEFS; initialize_ftrace) +fi + . `dirname $0`/xbc.sh ######## main #########
tools/bootconfig/scripts/ftrace.sh new file +109 -0
109 lines not on this page · raw message
Masami Hiramatsu
maintainerHi Steve,
Can you also merge this series to tracing tree?
Thank you,
Quoted 37 lines · On Sat, 15 Aug 2020 23:01:00 +0900 Masami Hiramatsu <[email protected]> wrote:
Hi,
This is the 2nd version of the series to introduce scripts for the boot-time tracing. In this version, I just updated 4/6 according to Steve's comment.
Previous series is here:
https://lkml.kernel.org/r/159704847064.175360.3292152056631660862.stgit@devnote2Thank you,
---
Masami Hiramatsu (6):
tools/bootconfig: Show bootconfig compact tree from bootconfig filetools/bootconfig: Add list option
tools/bootconfig: Make all functions static
tools/bootconfig: Add a script to generate ftrace shell-command from bootconfigtools/bootconfig: Add a script to generates bootconfig from ftracetools/bootconfig: Add --init option forbconf2ftrace.shMAINTAINERS | 1 tools/bootconfig/main.c | 147 +++++++++++++----- tools/bootconfig/scripts/bconf2ftrace.sh | 199 ++++++++++++++++++++++++ tools/bootconfig/scripts/ftrace.sh | 109 +++++++++++++ tools/bootconfig/scripts/ftrace2bconf.sh | 244 ++++++++++++++++++++++++++++++ tools/bootconfig/scripts/xbc.sh | 57 +++++++ 6 files changed, 715 insertions(+), 42 deletions(-) create mode 100755 tools/bootconfig/scripts/bconf2ftrace.sh create mode 100644 tools/bootconfig/scripts/ftrace.sh create mode 100755 tools/bootconfig/scripts/ftrace2bconf.sh create mode 100644 tools/bootconfig/scripts/xbc.sh--
Masami Hiramatsu (Linaro) <[email protected]>
Signature · 1 line
Masami Hiramatsu <[email protected]>