arm64: dts: qcom: sc7180: Add bandwidth votes for eMMC and SDcard
Subsystems (5)
Device tree bindings Arm Qualcomm mailing list MMC, SD and SDIO Arm Qualcomm support +1 more subsystems
PATCH v3 1/1 arm64: dts: qcom: sc7180: Add bandwidth votes for eMMC and SDcard
From: Pradeep P V K <[email protected]>
Add the bandwidth domain supporting performance state and the corresponding OPP tables for the sdhc device on sc7180.
Signed-off-by Pradeep P V K <[email protected]>
Signed-off-by Shaik Sajida Bhanu <[email protected]>
---
This change is depends on the below patch series:
https://lore.kernel.org/patchwork/patch/1278294/
Change since V2:
- Included tag in the of innerconnect-cells for sdhc nodes in-tune with https://lore.kernel.org/patchwork/patch/1278294/
Changes since V1:
- Included Pradeep Pragalapati signoff.
- Removed dependency patch list as those patches already merged on linux-next.
--- arch/arm64/boot/dts/qcom/sc7180.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
arch/arm64/boot/dts/qcom/sc7180.dtsi +15 -0
@@ -684,6 +684,9 @@ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; clock-names = "core", "iface"; + interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&sdhc1_opp_table>;
@@ -704,11 +707,15 @@ opp-100000000 { opp-hz = /bits/ 64 <100000000>; required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <100000 100000>; + opp-avg-kBps = <100000 50000>; }; opp-384000000 { opp-hz = /bits/ 64 <384000000>; required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <600000 900000>; + opp-avg-kBps = <261438 300000>; }; }; };
@@ -2476,6 +2483,10 @@ clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; clock-names = "core", "iface"; + + interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&sdhc2_opp_table>;
@@ -2489,11 +2500,15 @@ opp-100000000 { opp-hz = /bits/ 64 <100000000>; required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <160000 100000>; + opp-avg-kBps = <80000 50000>; }; opp-202000000 { opp-hz = /bits/ 64 <202000000>; required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <200000 120000>; + opp-avg-kBps = <100000 60000>; }; }; };
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation