Skip to contentSkip to conversation

FAILED: patch "[PATCH] dt-bindings: power: supply: bq25890: Document required" failed to apply to 4.14-stable tree

PATCH [email protected] 1 participant 1 message Aug 19, 2020

Subsystems (3)
Stable branch Device tree bindings Power supply
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 0768e6e4934e239f1a7f8ba83150a7c46765bb3e Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <[email protected]>
Date: Wed, 17 Jun 2020 12:23:05 +0200
Subject: [PATCH] dt-bindings: power: supply: bq25890: Document required
interrupt

The driver requires interrupts (fails probe if it is not provided) so document this requirement in bindings.

Fixes 4aeae9cb0dad ("power_supply: Add support for TI BQ25890 charger chip")
Cc <[email protected]>
Signed-off-by Krzysztof Kozlowski <[email protected]>
Signed-off-by Sebastian Reichel <[email protected]>
Documentation/devicetree/bindings/power/supply/bq25890.txt +4 -0
index 51ecc756521f..3b4c69a7fa70 100644
@@ -10,6 +10,7 @@ Required properties:
     * "ti,bq25895"
     * "ti,bq25896"
 - reg: integer, i2c address of the device.
+- interrupts: interrupt line;
 - ti,battery-regulation-voltage: integer, maximum charging voltage (in uV);
 - ti,charge-current: integer, maximum charging current (in uA);
 - ti,termination-current: integer, charge will be terminated when current in

@@ -39,6 +40,9 @@ bq25890 {
 	compatible = "ti,bq25890";
 	reg = <0x6a>;
 
+	interrupt-parent = <&gpio1>;
+	interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+
 	ti,battery-regulation-voltage = <4200000>;
 	ti,charge-current = <1000000>;
 	ti,termination-current = <50000>;