Skip to contentSkip to conversation

Linux 5.8.7

DISCUSSION Greg Kroah-Hartman 1 participant 2 messages Sep 5, 2020 Stable branch

lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

I'm announcing the release of the 5.8.7 kernel.

All users of the 5.8 kernel series must upgrade.

The updated 5.8.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-5.8.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary

thanks,

greg k-h

------------

 Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt |   32 ++++
 Makefile                                                       |    2 
 arch/arm64/boot/dts/nvidia/tegra186.dtsi                       |   20 +--
 arch/arm64/boot/dts/nvidia/tegra194.dtsi                       |   15 +-
 arch/arm64/boot/dts/nvidia/tegra210.dtsi                       |   20 +--
 arch/arm64/include/asm/kvm_asm.h                               |   43 ++++++
 arch/arm64/kernel/vmlinux.lds.S                                |    8 +
 arch/arm64/kvm/hyp/entry.S                                     |   15 +-
 arch/arm64/kvm/hyp/hyp-entry.S                                 |   65 ++++++----
 arch/arm64/kvm/hyp/switch.c                                    |   39 +++++-
 drivers/hid/hid-core.c                                         |   15 ++
 drivers/hid/hid-input.c                                        |    4 
 drivers/hid/hid-multitouch.c                                   |    2 
 drivers/media/v4l2-core/v4l2-ioctl.c                           |   50 ++++---
 drivers/mmc/host/sdhci-tegra.c                                 |    2 
 drivers/target/target_core_user.c                              |   11 +
 include/linux/hid.h                                            |   42 ++++--
 mm/gup.c                                                       |    2 
 net/netfilter/nft_set_rbtree.c                                 |   23 ++-
 net/wireless/nl80211.c                                         |    2 
 tools/perf/Documentation/perf-record.txt                       |    4 
 tools/perf/Documentation/perf-stat.txt                         |    4 
 tools/testing/selftests/x86/test_vsyscall.c                    |   22 +++
 23 files changed, 325 insertions(+), 117 deletions(-)

Andy Lutomirski (1):
selftests/x86/test_vsyscall: Improve the process_vm_readv() test

Bodo Stroesser (1):
scsi: target: tcmu: Optimize use of flush_dcache_page

Dave Hansen (1):
mm: fix pin vs. gup mismatch with gate pages

Greg Kroah-Hartman (1):

      Linux 5.8.7

James Morse (2):
KVM: arm64: Add kvm_extable for vaxorcism code
KVM: arm64: Survive synchronous exceptions caused by AT instructions

Johannes Berg (1):

      nl80211: fix NL80211_ATTR_HE_6GHZ_CAPABILITY usage

Kim Phillips (1):
perf record/stat: Explicitly call out event modifiers in the documentation

Marc Zyngier (2):
HID: core: Correctly handle ReportSize being zero
HID: core: Sanitize event code and type when mapping input

Peilin Ye (1):
media: media/v4l2-core: Fix kernel-infoleak in video_put_user()

Sowjanya Komatineni (6):
dt-bindings: mmc: tegra: Add tmclk for Tegra210 and later
arm64: tegra: Add missing timeout clock to Tegra194 SDMMC nodes
arm64: tegra: Add missing timeout clock to Tegra186 SDMMC nodes
arm64: tegra: Add missing timeout clock to Tegra210 SDMMC
sdhci: tegra: Remove SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK for Tegra210
sdhci: tegra: Remove SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK for Tegra186

Stefano Brivio (1):
netfilter: nft_set_rbtree: Handle outcomes of tree rotations in overlap detection

author maintainer
#1 lore raw
Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt +29 -3
index 2cf3affa1be7..96c0b1440c9c 100644
@@ -15,8 +15,15 @@ Required properties:
   - "nvidia,tegra210-sdhci": for Tegra210
   - "nvidia,tegra186-sdhci": for Tegra186
   - "nvidia,tegra194-sdhci": for Tegra194
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
+- clocks: For Tegra210, Tegra186 and Tegra194 must contain two entries.
+	  One for the module clock and one for the timeout clock.
+	  For all other Tegra devices, must contain a single entry for
+	  the module clock. See ../clocks/clock-bindings.txt for details.
+- clock-names: For Tegra210, Tegra186 and Tegra194 must contain the
+	       strings 'sdhci' and 'tmclk' to represent the module and
+	       the timeout clocks, respectively.
+	       For all other Tegra devices must contain the string 'sdhci'
+	       to represent the module clock.
 - resets : Must contain an entry for each entry in reset-names.
   See ../reset/reset.txt for details.
 - reset-names : Must include the following entries:
@@ -99,7 +106,7 @@ Optional properties for Tegra210, Tegra186 and Tegra194:
 
 Example:
 sdhci@700b0000 {
-	compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+	compatible = "nvidia,tegra124-sdhci";
 	reg = <0x0 0x700b0000 0x0 0x200>;
 	interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 	clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
@@ -115,3 +122,22 @@ sdhci@700b0000 {
 	nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
 	status = "disabled";
 };
+
+sdhci@700b0000 {
+	compatible = "nvidia,tegra210-sdhci";
+	reg = <0x0 0x700b0000 0x0 0x200>;
+	interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
+		 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+	clock-names = "sdhci", "tmclk";
+	resets = <&tegra_car 14>;
+	reset-names = "sdhci";
+	pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+	pinctrl-0 = <&sdmmc1_3v3>;
+	pinctrl-1 = <&sdmmc1_1v8>;
+	nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+	nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+	nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+	nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+	status = "disabled";
+};
Makefile +1 -1
index 5cf35650373b..5081bd85af29 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 8
-SUBLEVEL = 6
+SUBLEVEL = 7
 EXTRAVERSION =
 NAME = Kleptomaniac Octopus
 
arch/arm64/boot/dts/nvidia/tegra186.dtsi +12 -8
index 58100fb9cd8b..93236febd327 100644
@@ -331,8 +331,9 @@ sdmmc1: sdhci@3400000 {
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03400000 0x0 0x10000>;
 		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&bpmp TEGRA186_CLK_SDMMC1>;
-		clock-names = "sdhci";
+		clocks = <&bpmp TEGRA186_CLK_SDMMC1>,
+			 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+		clock-names = "sdhci", "tmclk";
 		resets = <&bpmp TEGRA186_RESET_SDMMC1>;
 		reset-names = "sdhci";
 		iommus = <&smmu TEGRA186_SID_SDMMC1>;
@@ -357,8 +358,9 @@ sdmmc2: sdhci@3420000 {
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03420000 0x0 0x10000>;
 		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&bpmp TEGRA186_CLK_SDMMC2>;
-		clock-names = "sdhci";
+		clocks = <&bpmp TEGRA186_CLK_SDMMC2>,
+			 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+		clock-names = "sdhci", "tmclk";
 		resets = <&bpmp TEGRA186_RESET_SDMMC2>;
 		reset-names = "sdhci";
 		iommus = <&smmu TEGRA186_SID_SDMMC2>;
@@ -378,8 +380,9 @@ sdmmc3: sdhci@3440000 {
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03440000 0x0 0x10000>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&bpmp TEGRA186_CLK_SDMMC3>;
-		clock-names = "sdhci";
+		clocks = <&bpmp TEGRA186_CLK_SDMMC3>,
+			 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+		clock-names = "sdhci", "tmclk";
 		resets = <&bpmp TEGRA186_RESET_SDMMC3>;
 		reset-names = "sdhci";
 		iommus = <&smmu TEGRA186_SID_SDMMC3>;
@@ -401,8 +404,9 @@ sdmmc4: sdhci@3460000 {
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03460000 0x0 0x10000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&bpmp TEGRA186_CLK_SDMMC4>;
-		clock-names = "sdhci";
+		clocks = <&bpmp TEGRA186_CLK_SDMMC4>,
+			 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+		clock-names = "sdhci", "tmclk";
 		assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC4>,
 				  <&bpmp TEGRA186_CLK_PLLC4_VCO>;
 		assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>;
arch/arm64/boot/dts/nvidia/tegra194.dtsi +9 -6
index 4bc187a4eacd..980a8500b4b2 100644
@@ -453,8 +453,9 @@ sdmmc1: sdhci@3400000 {
 			compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci";
 			reg = <0x03400000 0x10000>;
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bpmp TEGRA194_CLK_SDMMC1>;
-			clock-names = "sdhci";
+			clocks = <&bpmp TEGRA194_CLK_SDMMC1>,
+				 <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
 			resets = <&bpmp TEGRA194_RESET_SDMMC1>;
 			reset-names = "sdhci";
 			nvidia,pad-autocal-pull-up-offset-3v3-timeout =
@@ -475,8 +476,9 @@ sdmmc3: sdhci@3440000 {
 			compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci";
 			reg = <0x03440000 0x10000>;
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bpmp TEGRA194_CLK_SDMMC3>;
-			clock-names = "sdhci";
+			clocks = <&bpmp TEGRA194_CLK_SDMMC3>,
+				 <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
 			resets = <&bpmp TEGRA194_RESET_SDMMC3>;
 			reset-names = "sdhci";
 			nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
@@ -498,8 +500,9 @@ sdmmc4: sdhci@3460000 {
 			compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci";
 			reg = <0x03460000 0x10000>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bpmp TEGRA194_CLK_SDMMC4>;
-			clock-names = "sdhci";
+			clocks = <&bpmp TEGRA194_CLK_SDMMC4>,
+				 <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
 			assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC4>,
 					  <&bpmp TEGRA194_CLK_PLLC4>;
 			assigned-clock-parents =
arch/arm64/boot/dts/nvidia/tegra210.dtsi +12 -8
index 08655081f72d..04f3a2d4990d 100644
@@ -1180,8 +1180,9 @@ sdhci@700b0000 {
 		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0000 0x0 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
-		clock-names = "sdhci";
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
+			 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+		clock-names = "sdhci", "tmclk";
 		resets = <&tegra_car 14>;
 		reset-names = "sdhci";
 		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
@@ -1208,8 +1209,9 @@ sdhci@700b0200 {
 		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0200 0x0 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA210_CLK_SDMMC2>;
-		clock-names = "sdhci";
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC2>,
+			 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+		clock-names = "sdhci", "tmclk";
 		resets = <&tegra_car 9>;
 		reset-names = "sdhci";
 		pinctrl-names = "sdmmc-1v8-drv";
@@ -1225,8 +1227,9 @@ sdhci@700b0400 {
 		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0400 0x0 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA210_CLK_SDMMC3>;
-		clock-names = "sdhci";
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC3>,
+			 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+		clock-names = "sdhci", "tmclk";
 		resets = <&tegra_car 69>;
 		reset-names = "sdhci";
 		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
@@ -1248,8 +1251,9 @@ sdhci@700b0600 {
 		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0600 0x0 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA210_CLK_SDMMC4>;
-		clock-names = "sdhci";
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+			 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+		clock-names = "sdhci", "tmclk";
 		resets = <&tegra_car 15>;
 		reset-names = "sdhci";
 		pinctrl-names = "sdmmc-3v3-drv", "sdmmc-1v8-drv";
arch/arm64/include/asm/kvm_asm.h +43 -0

55 lines not on this page · raw message

arch/arm64/kernel/vmlinux.lds.S +8 -0
index 5423ffe0a987..1417a9042d13 100644
@@ -21,6 +21,13 @@ ENTRY(_text)
 
 jiffies = jiffies_64;
 
+
+#define HYPERVISOR_EXTABLE					\
+	. = ALIGN(SZ_8);					\
+	__start___kvm_ex_table = .;				\
+	*(__kvm_ex_table)					\
+	__stop___kvm_ex_table = .;
+
 #define HYPERVISOR_TEXT					\
 	/*						\
 	 * Align to 4 KB so that			\
@@ -36,6 +43,7 @@ jiffies = jiffies_64;
 	__hyp_idmap_text_end = .;			\
 	__hyp_text_start = .;				\
 	*(.hyp.text)					\
+	HYPERVISOR_EXTABLE				\
 	__hyp_text_end = .;
 
 #define IDMAP_TEXT					\
arch/arm64/kvm/hyp/entry.S +9 -6
index 90186cf6473e..c2e6da356408 100644
@@ -198,20 +198,23 @@ alternative_endif
 	// This is our single instruction exception window. A pending
 	// SError is guaranteed to occur at the earliest when we unmask
 	// it, and at the latest just after the ISB.
-	.global	abort_guest_exit_start
 abort_guest_exit_start:
 
 	isb
 
-	.global	abort_guest_exit_end
 abort_guest_exit_end:
 
 	msr	daifset, #4	// Mask aborts
+	ret
+
+	_kvm_extable	abort_guest_exit_start, 9997f
+	_kvm_extable	abort_guest_exit_end, 9997f
+9997:
+	msr	daifset, #4	// Mask aborts
+	mov	x0, #(1 << ARM_EXIT_WITH_SERROR_BIT)
 
-	// If the exception took place, restore the EL1 exception
-	// context so that we can report some information.
-	// Merge the exception code with the SError pending bit.
-	tbz	x0, #ARM_EXIT_WITH_SERROR_BIT, 1f
+	// restore the EL1 exception context so that we can report some
+	// information. Merge the exception code with the SError pending bit.
 	msr	elr_el2, x2
 	msr	esr_el2, x3
 	msr	spsr_el2, x4
arch/arm64/kvm/hyp/hyp-entry.S +41 -24

87 lines not on this page · raw message

arch/arm64/kvm/hyp/switch.c +35 -4
index 9270b14157b5..ba225e09aaf1 100644
@@ -14,6 +14,7 @@
 
 #include <asm/barrier.h>
 #include <asm/cpufeature.h>
+#include <asm/extable.h>
 #include <asm/kprobes.h>
 #include <asm/kvm_asm.h>
 #include <asm/kvm_emulate.h>
@@ -24,6 +25,9 @@
 #include <asm/processor.h>
 #include <asm/thread_info.h>
 
+extern struct exception_table_entry __start___kvm_ex_table;
+extern struct exception_table_entry __stop___kvm_ex_table;
+
 /* Check whether the FP regs were dirtied while in the host-side run loop: */
 static bool __hyp_text update_fp_enabled(struct kvm_vcpu *vcpu)
 {
@@ -299,10 +303,10 @@ static bool __hyp_text __translate_far_to_hpfar(u64 far, u64 *hpfar)
 	 * saved the guest context yet, and we may return early...
 	 */
 	par = read_sysreg(par_el1);
-	asm volatile("at s1e1r, %0" : : "r" (far));
-	isb();
-
-	tmp = read_sysreg(par_el1);
+	if (!__kvm_at("s1e1r", far))
+		tmp = read_sysreg(par_el1);
+	else
+		tmp = SYS_PAR_EL1_F; /* back to the guest */
 	write_sysreg(par, par_el1);
 
 	if (unlikely(tmp & SYS_PAR_EL1_F))
@@ -934,3 +938,30 @@ void __hyp_text __noreturn hyp_panic(struct kvm_cpu_context *host_ctxt)
 
 	unreachable();
 }
+
+asmlinkage void __hyp_text kvm_unexpected_el2_exception(void)
+{
+	unsigned long addr, fixup;
+	struct kvm_cpu_context *host_ctxt;
+	struct exception_table_entry *entry, *end;
+	unsigned long elr_el2 = read_sysreg(elr_el2);
+
+	entry = hyp_symbol_addr(__start___kvm_ex_table);
+	end = hyp_symbol_addr(__stop___kvm_ex_table);
+	host_ctxt = &__hyp_this_cpu_ptr(kvm_host_data)->host_ctxt;
+
+	while (entry < end) {
+		addr = (unsigned long)&entry->insn + entry->insn;
+		fixup = (unsigned long)&entry->fixup + entry->fixup;
+
+		if (addr != elr_el2) {
+			entry++;
+			continue;
+		}
+
+		write_sysreg(fixup, elr_el2);
+		return;
+	}
+
+	hyp_panic(host_ctxt);
+}
drivers/hid/hid-core.c +13 -2
index 359616e3efbb..d2ecc9c45255 100644
@@ -1597,6 +1597,17 @@ static void hid_output_field(const struct hid_device *hid,
 	}
 }
 
+/*
+ * Compute the size of a report.
+ */
+static size_t hid_compute_report_size(struct hid_report *report)
+{
+	if (report->size)
+		return ((report->size - 1) >> 3) + 1;
+
+	return 0;
+}
+
 /*
  * Create a report. 'data' has to be allocated using
  * hid_alloc_report_buf() so that it has proper size.
@@ -1609,7 +1620,7 @@ void hid_output_report(struct hid_report *report, __u8 *data)
 	if (report->id > 0)
 		*data++ = report->id;
 
-	memset(data, 0, ((report->size - 1) >> 3) + 1);
+	memset(data, 0, hid_compute_report_size(report));
 	for (n = 0; n < report->maxfield; n++)
 		hid_output_field(report->device, report->field[n], data);
 }
@@ -1739,7 +1750,7 @@ int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, u32 size,
 		csize--;
 	}
 
-	rsize = ((report->size - 1) >> 3) + 1;
+	rsize = hid_compute_report_size(report);
 
 	if (report_enum->numbered && rsize >= HID_MAX_BUFFER_SIZE)
 		rsize = HID_MAX_BUFFER_SIZE - 1;
drivers/hid/hid-input.c +4 -0
index e8641ce677e4..e3d475f4baf6 100644
@@ -1132,6 +1132,10 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 	}
 
 mapped:
+	/* Mapping failed, bail out */
+	if (!bit)
+		return;
+
 	if (device->driver->input_mapped &&
 	    device->driver->input_mapped(device, hidinput, field, usage,
 					 &bit, &max) < 0) {
drivers/hid/hid-multitouch.c +2 -0
index 3f94b4954225..e3152155c4b8 100644
@@ -856,6 +856,8 @@ static int mt_touch_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 			code = BTN_0  + ((usage->hid - 1) & HID_USAGE);
 
 		hid_map_usage(hi, usage, bit, max, EV_KEY, code);
+		if (!*bit)
+			return -1;
 		input_set_capability(hi->input, EV_KEY, code);
 		return 1;
 
drivers/media/v4l2-core/v4l2-ioctl.c +27 -23

62 lines not on this page · raw message

drivers/mmc/host/sdhci-tegra.c +0 -2
index 3a372ab3d12e..db1a8d1c96b3 100644
@@ -1409,7 +1409,6 @@ static const struct sdhci_ops tegra210_sdhci_ops = {
 
 static const struct sdhci_pltfm_data sdhci_tegra210_pdata = {
 	.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
-		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
 		  SDHCI_QUIRK_SINGLE_POWER_WRITE |
 		  SDHCI_QUIRK_NO_HISPD_BIT |
 		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
@@ -1447,7 +1446,6 @@ static const struct sdhci_ops tegra186_sdhci_ops = {
 
 static const struct sdhci_pltfm_data sdhci_tegra186_pdata = {
 	.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
-		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
 		  SDHCI_QUIRK_SINGLE_POWER_WRITE |
 		  SDHCI_QUIRK_NO_HISPD_BIT |
 		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
drivers/target/target_core_user.c +7 -4
index 9ab960cc39b6..0209bc23e631 100644
@@ -676,8 +676,10 @@ static void scatter_data_area(struct tcmu_dev *udev,
 		from = kmap_atomic(sg_page(sg)) + sg->offset;
 		while (sg_remaining > 0) {
 			if (block_remaining == 0) {
-				if (to)
+				if (to) {
+					flush_dcache_page(page);
 					kunmap_atomic(to);
+				}
 
 				block_remaining = DATA_BLOCK_SIZE;
 				dbi = tcmu_cmd_get_dbi(tcmu_cmd);
@@ -722,7 +724,6 @@ static void scatter_data_area(struct tcmu_dev *udev,
 				memcpy(to + offset,
 				       from + sg->length - sg_remaining,
 				       copy_bytes);
-				tcmu_flush_dcache_range(to, copy_bytes);
 			}
 
 			sg_remaining -= copy_bytes;
@@ -731,8 +732,10 @@ static void scatter_data_area(struct tcmu_dev *udev,
 		kunmap_atomic(from - sg->offset);
 	}
 
-	if (to)
+	if (to) {
+		flush_dcache_page(page);
 		kunmap_atomic(to);
+	}
 }
 
 static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd,
@@ -778,13 +781,13 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd,
 				dbi = tcmu_cmd_get_dbi(cmd);
 				page = tcmu_get_block_page(udev, dbi);
 				from = kmap_atomic(page);
+				flush_dcache_page(page);
 			}
 			copy_bytes = min_t(size_t, sg_remaining,
 					block_remaining);
 			if (read_len < copy_bytes)
 				copy_bytes = read_len;
 			offset = DATA_BLOCK_SIZE - block_remaining;
-			tcmu_flush_dcache_range(from, copy_bytes);
 			memcpy(to + sg->length - sg_remaining, from + offset,
 					copy_bytes);
 
include/linux/hid.h +29 -13

70 lines not on this page · raw message

mm/gup.c +1 -1
index 6f47697f8fb0..0d8d76f10ac6 100644
@@ -843,7 +843,7 @@ static int get_gate_page(struct mm_struct *mm, unsigned long address,
 			goto unmap;
 		*page = pte_page(*pte);
 	}
-	if (unlikely(!try_get_page(*page))) {
+	if (unlikely(!try_grab_page(*page, gup_flags))) {
 		ret = -ENOMEM;
 		goto unmap;
 	}
net/netfilter/nft_set_rbtree.c +14 -9
index b6aad3fc46c3..b85ce6f0c0a6 100644
@@ -238,21 +238,27 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set,
 	 *
 	 * b1. _ _ __>|  !_ _ __|  (insert end before existing start)
 	 * b2. _ _ ___|  !_ _ _>|  (insert end after existing start)
-	 * b3. _ _ ___! >|_ _ __|  (insert start after existing end)
+	 * b3. _ _ ___! >|_ _ __|  (insert start after existing end, as a leaf)
+	 *            '--' no nodes falling in this range
+	 * b4.          >|_ _   !  (insert start before existing start)
 	 *
 	 * Case a3. resolves to b3.:
 	 * - if the inserted start element is the leftmost, because the '0'
 	 *   element in the tree serves as end element
-	 * - otherwise, if an existing end is found. Note that end elements are
-	 *   always inserted after corresponding start elements.
+	 * - otherwise, if an existing end is found immediately to the left. If
+	 *   there are existing nodes in between, we need to further descend the
+	 *   tree before we can conclude the new start isn't causing an overlap
+	 *
+	 * or to b4., which, preceded by a3., means we already traversed one or
+	 * more existing intervals entirely, from the right.
 	 *
 	 * For a new, rightmost pair of elements, we'll hit cases b3. and b2.,
 	 * in that order.
 	 *
 	 * The flag is also cleared in two special cases:
 	 *
-	 * b4. |__ _ _!|<_ _ _   (insert start right before existing end)
-	 * b5. |__ _ >|!__ _ _   (insert end right after existing start)
+	 * b5. |__ _ _!|<_ _ _   (insert start right before existing end)
+	 * b6. |__ _ >|!__ _ _   (insert end right after existing start)
 	 *
 	 * which always happen as last step and imply that no further
 	 * overlapping is possible.
@@ -272,7 +278,7 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set,
 			if (nft_rbtree_interval_start(new)) {
 				if (nft_rbtree_interval_end(rbe) &&
 				    nft_set_elem_active(&rbe->ext, genmask) &&
-				    !nft_set_elem_expired(&rbe->ext))
+				    !nft_set_elem_expired(&rbe->ext) && !*p)
 					overlap = false;
 			} else {
 				overlap = nft_rbtree_interval_end(rbe) &&
@@ -288,10 +294,9 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set,
 					  nft_set_elem_active(&rbe->ext,
 							      genmask) &&
 					  !nft_set_elem_expired(&rbe->ext);
-			} else if (nft_rbtree_interval_end(rbe) &&
-				   nft_set_elem_active(&rbe->ext, genmask) &&
+			} else if (nft_set_elem_active(&rbe->ext, genmask) &&
 				   !nft_set_elem_expired(&rbe->ext)) {
-				overlap = true;
+				overlap = nft_rbtree_interval_end(rbe);
 			}
 		} else {
 			if (nft_rbtree_interval_end(rbe) &&
net/wireless/nl80211.c +1 -1
index 7fbca0854265..279c87a2a523 100644
@@ -6010,7 +6010,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 
 	if (info->attrs[NL80211_ATTR_HE_6GHZ_CAPABILITY])
 		params.he_6ghz_capa =
-			nla_data(info->attrs[NL80211_ATTR_HE_CAPABILITY]);
+			nla_data(info->attrs[NL80211_ATTR_HE_6GHZ_CAPABILITY]);
 
 	if (info->attrs[NL80211_ATTR_AIRTIME_WEIGHT])
 		params.airtime_weight =
tools/perf/Documentation/perf-record.txt +4 -0
index fa8a5fcd27ab..950e4ad21374 100644
@@ -33,6 +33,10 @@ OPTIONS
         - a raw PMU event (eventsel+umask) in the form of rNNN where NNN is a
 	  hexadecimal event descriptor.
 
+        - a symbolic or raw PMU event followed by an optional colon
+	  and a list of event modifiers, e.g., cpu-cycles:p.  See the
+	  linkperf:perf-list[1] man page for details on event modifiers.
+
 	- a symbolically formed PMU event like 'pmu/param1=0x3,param2/' where
 	  'param1', 'param2', etc are defined as formats for the PMU in
 	  /sys/bus/event_source/devices/<pmu>/format/*.
tools/perf/Documentation/perf-stat.txt +4 -0
index b029ee728a0b..c8209467076b 100644
@@ -39,6 +39,10 @@ report::
 	- a raw PMU event (eventsel+umask) in the form of rNNN where NNN is a
 	  hexadecimal event descriptor.
 
+        - a symbolic or raw PMU event followed by an optional colon
+	  and a list of event modifiers, e.g., cpu-cycles:p.  See the
+	  linkperf:perf-list[1] man page for details on event modifiers.
+
 	- a symbolically formed event like 'pmu/param1=0x3,param2/' where
 	  param1 and param2 are defined as formats for the PMU in
 	  /sys/bus/event_source/devices/<pmu>/format/*
tools/testing/selftests/x86/test_vsyscall.c +20 -2
index c41f24b517f4..65c141ebfbbd 100644
@@ -462,6 +462,17 @@ static int test_vsys_x(void)
 	return 0;
 }
 
+/*
+ * Debuggers expect ptrace() to be able to peek at the vsyscall page.
+ * Use process_vm_readv() as a proxy for ptrace() to test this.  We
+ * want it to work in the vsyscall=emulate case and to fail in the
+ * vsyscall=xonly case.
+ *
+ * It's worth noting that this ABI is a bit nutty.  write(2) can't
+ * read from the vsyscall page on any kernel version or mode.  The
+ * fact that ptrace() ever worked was a nice courtesy of old kernels,
+ * but the code to support it is fairly gross.
+ */
 static int test_process_vm_readv(void)
 {
 #ifdef __x86_64__
@@ -477,8 +488,12 @@ static int test_process_vm_readv(void)
 	remote.iov_len = 4096;
 	ret = process_vm_readv(getpid(), &local, 1, &remote, 1, 0);
 	if (ret != 4096) {
-		printf("[OK]\tprocess_vm_readv() failed (ret = %d, errno = %d)\n", ret, errno);
-		return 0;
+		/*
+		 * We expect process_vm_readv() to work if and only if the
+		 * vsyscall page is readable.
+		 */
+		printf("[%s]\tprocess_vm_readv() failed (ret = %d, errno = %d)\n", vsyscall_map_r ? "FAIL" : "OK", ret, errno);
+		return vsyscall_map_r ? 1 : 0;
 	}
 
 	if (vsyscall_map_r) {
@@ -488,6 +503,9 @@ static int test_process_vm_readv(void)
 			printf("[FAIL]\tIt worked but returned incorrect data\n");
 			return 1;
 		}
+	} else {
+		printf("[FAIL]\tprocess_rm_readv() succeeded, but it should have failed in this configuration\n");
+		return 1;
 	}
 #endif