Add new IGT test to validate crtc Dithering
PATCH 1/1 Add new IGT test to validate crtc Dithering
Even though feature Dithering is there since legacy, there is no specific IGT for this.
This patch will create New IGT for Dithering. And below is the truth table for CRTC Dithering.
|----------------|---------|-------------| | Frame buffer | Panel | Dithering | |----------------|---------|-------------| | 8 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 8 BPC | 8 BPC | No | |----------------|---------|-------------| | 8 BPC | 10 BPC | No | |----------------|---------|-------------| | 10 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 10 BPC | No | |----------------|---------|-------------| | 16 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 10 BPC | Yes | |----------------|---------|-------------|
--- tests/Makefile.sources | 1 + tests/kms_dither.c | 252 +++++++++++++++++++++++++++++++++++++++++ tests/meson.build | 1 + 3 files changed, 254 insertions(+) create mode 100644 tests/kms_dither.c
tests/Makefile.sources +1 -0
@@ -43,6 +43,7 @@ TESTS_progs = \ kms_cursor_crc \ kms_cursor_edge_walk \ kms_cursor_legacy \ + kms_dither \ kms_dp_aux_dev \ kms_dp_dsc \ kms_dp_tiled_display \
tests/kms_dither.c new file +252 -0
252 lines not on this page · raw message
tests/meson.build +1 -0
@@ -27,6 +27,7 @@ test_progs = [ 'kms_cursor_crc', 'kms_cursor_edge_walk', 'kms_cursor_legacy', + 'kms_dither', 'kms_dp_aux_dev', 'kms_dp_dsc', 'kms_dp_tiled_display',
Signature · 6 lines
2.20.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for Add new IGT test to validate crtc Dithering
== Series Details ==
== Series Details ==
Series: Add new IGT test to validate crtc Dithering
URL : https://patchwork.freedesktop.org/series/79661/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_8765 -> IGTPW_4778
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/index.html
Known issues
------------
Here are the changes found in IGTPW_4778 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_suspend@basic-s0:
- fi-tgl-u2: [PASS][1] -> [FAIL][2] ([i915#1888])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/fi-tgl-u2/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/fi-tgl-u2/igt@[email protected]
* igt@i915_pm_rpm@basic-pci-d3-state:
- fi-bsw-kefka: [PASS][3] -> [DMESG-WARN][4] ([i915#1982])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/fi-bsw-kefka/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/fi-bsw-kefka/igt@[email protected]
* igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic:
- fi-bsw-n3050: [PASS][5] -> [DMESG-WARN][6] ([i915#1982])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/fi-bsw-n3050/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/fi-bsw-n3050/igt@[email protected]
* igt@kms_flip@basic-flip-vs-wf_vblank@c-edp1:
- fi-icl-u2: [PASS][7] -> [DMESG-WARN][8] ([i915#1982])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/fi-icl-u2/igt@kms_flip@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/fi-icl-u2/igt@kms_flip@[email protected]
* igt@kms_frontbuffer_tracking@basic:
- fi-tgl-y: [PASS][9] -> [DMESG-WARN][10] ([i915#1982])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/fi-tgl-y/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/fi-tgl-y/igt@[email protected]
* igt@vgem_basic@debugfs:
- fi-tgl-y: [PASS][11] -> [DMESG-WARN][12] ([i915#402])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/fi-tgl-y/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/fi-tgl-y/igt@[email protected]
#### Possible fixes ####
* igt@i915_selftest@live@coherency:
- fi-gdg-551: [DMESG-FAIL][13] ([i915#1748]) -> [PASS][14]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/fi-gdg-551/igt@i915_selftest@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/fi-gdg-551/igt@i915_selftest@[email protected]
* igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy:
- fi-icl-u2: [DMESG-WARN][15] ([i915#1982]) -> [PASS][16] +1 similar issue
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/fi-icl-u2/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/fi-icl-u2/igt@[email protected]
* igt@kms_pipe_crc_basic@read-crc-pipe-a-frame-sequence:
- fi-tgl-u2: [DMESG-WARN][17] ([i915#402]) -> [PASS][18]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/fi-tgl-u2/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/fi-tgl-u2/igt@[email protected]
* igt@vgem_basic@create:
- fi-tgl-y: [DMESG-WARN][19] ([i915#402]) -> [PASS][20]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/fi-tgl-y/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/fi-tgl-y/igt@[email protected]
#### Warnings ####
* igt@i915_pm_rpm@basic-rte:
- fi-kbl-guc: [DMESG-FAIL][21] -> [SKIP][22] ([fdo#109271])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/fi-kbl-guc/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/fi-kbl-guc/igt@[email protected]
* igt@i915_pm_rpm@module-reload:
- fi-kbl-x1275: [DMESG-FAIL][23] ([i915#62]) -> [SKIP][24] ([fdo#109271])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/fi-kbl-x1275/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/fi-kbl-x1275/igt@[email protected]
* igt@kms_cursor_legacy@basic-flip-after-cursor-legacy:
- fi-kbl-x1275: [DMESG-WARN][25] ([i915#62] / [i915#92]) -> [DMESG-WARN][26] ([i915#62] / [i915#92] / [i915#95]) +3 similar issues
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/fi-kbl-x1275/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/fi-kbl-x1275/igt@[email protected]
* igt@kms_force_connector_basic@prune-stale-modes:
- fi-kbl-x1275: [DMESG-WARN][27] ([i915#62] / [i915#92] / [i915#95]) -> [DMESG-WARN][28] ([i915#62] / [i915#92]) +2 similar issues
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/fi-kbl-x1275/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/fi-kbl-x1275/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[i915#1748]: https://gitlab.freedesktop.org/drm/intel/issues/1748
[i915#1888]: https://gitlab.freedesktop.org/drm/intel/issues/1888
[i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
[i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402
[i915#62]: https://gitlab.freedesktop.org/drm/intel/issues/62
[i915#92]: https://gitlab.freedesktop.org/drm/intel/issues/92
[i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
Participating hosts (47 -> 40)
------------------------------
Missing (7): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper fi-bdw-samus
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_5740 -> IGTPW_4778
CI-20190529: 20190529
CI_DRM_8765: dfeec97e409151bf4ef70632e20b9251f2611267 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_4778: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/index.html
IGT_5740: 6663e3ab5f77add7077711c2b649caf2bd7903c4 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Testlist changes ==
+igt@kms_dither@fb-8bpc-vs-panel-6bpc
+igt@kms_dither@fb-8bpc-vs-panel-8bpc
+igt@kms_dither@fb-8bpc-vs-panel-10bpc
+igt@kms_dither@fb-10bpc-vs-panel-6bpc
+igt@kms_dither@fb-10bpc-vs-panel-8bpc
+igt@kms_dither@fb-10bpc-vs-panel-10bpc
+igt@kms_dither@fb-16bpc-vs-panel-6bpc
+igt@kms_dither@fb-16bpc-vs-panel-8bpc
+igt@kms_dither@fb-16bpc-vs-panel-10bpc
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ Fi.CI.IGT: failure for Add new IGT test to validate crtc Dithering
In reply to Bhanuprakash Modem== Series Details ==
== Series Details ==
Series: Add new IGT test to validate crtc Dithering
URL : https://patchwork.freedesktop.org/series/79661/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_8765_full -> IGTPW_4778_full
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with IGTPW_4778_full absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in IGTPW_4778_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/index.html
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_4778_full:
### IGT changes ###
#### Possible regressions ####
* {igt@kms_dither@fb-8bpc-vs-panel-6bpc} (NEW):
- shard-iclb: NOTRUN -> [SKIP][1] +7 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-iclb4/igt@[email protected]
* {igt@kms_dither@fb-8bpc-vs-panel-8bpc} (NEW):
- shard-tglb: NOTRUN -> [SKIP][2] +7 similar issues
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-tglb3/igt@[email protected]
* igt@kms_flip@2x-flip-vs-blocking-wf-vblank@ac-vga1-hdmi-a1:
- shard-hsw: [PASS][3] -> [INCOMPLETE][4]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-hsw6/igt@kms_flip@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-hsw8/igt@kms_flip@[email protected]
New tests
---------
New tests have been introduced between CI_DRM_8765_full and IGTPW_4778_full:
### New IGT tests (9) ###
* igt@kms_dither@fb-10bpc-vs-panel-10bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-10bpc-vs-panel-6bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-10bpc-vs-panel-8bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-16bpc-vs-panel-10bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-16bpc-vs-panel-6bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-16bpc-vs-panel-8bpc:
- Statuses :
- Exec time: [None] s
* igt@kms_dither@fb-8bpc-vs-panel-10bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0] s
* igt@kms_dither@fb-8bpc-vs-panel-6bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0] s
* igt@kms_dither@fb-8bpc-vs-panel-8bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
Known issues
------------
Here are the changes found in IGTPW_4778_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_create@madvise:
- shard-glk: [PASS][5] -> [DMESG-WARN][6] ([i915#118] / [i915#95])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-glk1/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-glk1/igt@[email protected]
* igt@i915_pm_dc@dc6-psr:
- shard-iclb: [PASS][7] -> [FAIL][8] ([i915#1899])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-iclb4/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-iclb5/igt@[email protected]
* igt@i915_pm_rc6_residency@rc6-idle:
- shard-hsw: [PASS][9] -> [WARN][10] ([i915#1519])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-hsw4/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-hsw8/igt@[email protected]
* igt@i915_selftest@mock@requests:
- shard-glk: [PASS][11] -> [INCOMPLETE][12] ([i915#2110])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-glk5/igt@i915_selftest@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-glk3/igt@i915_selftest@[email protected]
* igt@kms_frontbuffer_tracking@fbc-rgb101010-draw-pwrite:
- shard-tglb: [PASS][13] -> [DMESG-WARN][14] ([i915#1982])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-tglb2/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-tglb6/igt@[email protected]
* igt@kms_plane@plane-panning-bottom-right-pipe-b-planes:
- shard-hsw: [PASS][15] -> [TIMEOUT][16] ([i915#1958] / [i915#2119]) +1 similar issue
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-hsw2/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-hsw7/igt@[email protected]
- shard-snb: [PASS][17] -> [TIMEOUT][18] ([i915#1958] / [i915#2119]) +2 similar issues
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-snb4/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-snb5/igt@[email protected]
* igt@kms_psr2_su@frontbuffer:
- shard-tglb: [PASS][19] -> [SKIP][20] ([i915#1911])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-tglb3/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-tglb6/igt@[email protected]
* igt@kms_psr@psr2_sprite_plane_move:
- shard-iclb: [PASS][21] -> [SKIP][22] ([fdo#109441])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-iclb2/igt@kms_psr@psr2_sprite_plane_move.html
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-iclb5/igt@kms_psr@psr2_sprite_plane_move.html
* igt@kms_vblank@pipe-a-ts-continuation-suspend:
- shard-kbl: [PASS][23] -> [DMESG-WARN][24] ([i915#180]) +6 similar issues
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-kbl1/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-kbl6/igt@[email protected]
* igt@kms_vblank@pipe-b-query-forked-busy:
- shard-apl: [PASS][25] -> [DMESG-WARN][26] ([i915#1635] / [i915#1982]) +1 similar issue
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-apl3/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-apl4/igt@[email protected]
#### Possible fixes ####
* igt@gem_exec_balancer@bonded-early:
- shard-iclb: [FAIL][27] ([i915#926]) -> [PASS][28]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-iclb4/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-iclb4/igt@[email protected]
* igt@gem_exec_params@sol-reset-not-gen7:
- shard-snb: [TIMEOUT][29] ([i915#1958] / [i915#2119]) -> [PASS][30]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-snb5/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-snb6/igt@[email protected]
* igt@kms_big_fb@linear-64bpp-rotate-180:
- shard-glk: [DMESG-FAIL][31] ([i915#118] / [i915#95]) -> [PASS][32]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-glk8/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-glk6/igt@[email protected]
* igt@kms_cursor_edge_walk@pipe-b-256x256-bottom-edge:
- shard-glk: [DMESG-WARN][33] ([i915#1982]) -> [PASS][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-glk4/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-glk9/igt@[email protected]
* igt@kms_flip@flip-vs-suspend-interruptible@a-dp1:
- shard-kbl: [DMESG-WARN][35] ([i915#180]) -> [PASS][36] +3 similar issues
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-kbl1/igt@kms_flip@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-kbl2/igt@kms_flip@[email protected]
* igt@kms_flip@flip-vs-suspend-interruptible@c-hdmi-a1:
- shard-hsw: [INCOMPLETE][37] ([i915#2055]) -> [PASS][38]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-hsw2/igt@kms_flip@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-hsw4/igt@kms_flip@[email protected]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-indfb-draw-mmap-gtt:
- shard-apl: [DMESG-WARN][39] ([i915#1635] / [i915#1982]) -> [PASS][40]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-apl6/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-indfb-draw-mmap-gtt.html
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-apl6/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-indfb-draw-mmap-gtt.html
* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-pri-shrfb-draw-blt:
- shard-glk: [FAIL][41] ([i915#49]) -> [PASS][42]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-glk5/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-glk5/igt@[email protected]
* igt@kms_frontbuffer_tracking@psr-farfromfence:
- shard-tglb: [DMESG-WARN][43] ([i915#1982]) -> [PASS][44] +3 similar issues
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-tglb1/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-tglb7/igt@[email protected]
* igt@kms_psr@cursor_mmap_cpu:
- shard-tglb: [DMESG-WARN][45] ([i915#402]) -> [PASS][46]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-tglb3/igt@kms_psr@cursor_mmap_cpu.html
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-tglb6/igt@kms_psr@cursor_mmap_cpu.html
* igt@kms_psr@psr2_primary_mmap_gtt:
- shard-iclb: [SKIP][47] ([fdo#109441]) -> [PASS][48]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-iclb1/igt@kms_psr@psr2_primary_mmap_gtt.html
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-iclb2/igt@kms_psr@psr2_primary_mmap_gtt.html
* igt@kms_vblank@pipe-b-wait-forked-busy:
- shard-kbl: [DMESG-WARN][49] ([i915#62] / [i915#92]) -> [PASS][50] +3 similar issues
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-kbl6/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-kbl7/igt@[email protected]
* igt@perf@global-sseu-config:
- shard-hsw: [INCOMPLETE][51] ([i915#1958]) -> [PASS][52]
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-hsw8/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-hsw2/igt@[email protected]
#### Warnings ####
* igt@gem_exec_params@sol-reset-not-gen7:
- shard-hsw: [TIMEOUT][53] ([i915#1958] / [i915#2119]) -> [SKIP][54] ([fdo#109271]) +1 similar issue
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-hsw8/igt@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-hsw4/igt@[email protected]
* igt@i915_pm_dc@dc3co-vpb-simulation:
- shard-iclb: [SKIP][55] ([i915#658]) -> [SKIP][56] ([i915#588])
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-iclb8/igt@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-iclb2/igt@[email protected]
* igt@i915_pm_dc@dc6-psr:
- shard-tglb: [FAIL][57] ([i915#454]) -> [FAIL][58] ([i915#1899])
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-tglb6/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-tglb1/igt@[email protected]
* igt@kms_dp_dsc@basic-dsc-enable-edp:
- shard-iclb: [DMESG-WARN][59] ([i915#1226]) -> [SKIP][60] ([fdo#109349])
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-iclb2/igt@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-iclb1/igt@[email protected]
* igt@kms_flip@2x-flip-vs-panning-vs-hang:
- shard-snb: [SKIP][61] ([fdo#109271]) -> [TIMEOUT][62] ([i915#1958] / [i915#2119]) +1 similar issue
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-snb6/igt@[email protected]
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-snb5/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbcpsr-2p-scndscrn-spr-indfb-onoff:
- shard-hsw: [SKIP][63] ([fdo#109271]) -> [TIMEOUT][64] ([i915#1958] / [i915#2119])
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-hsw6/igt@[email protected]
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-hsw7/igt@[email protected]
* igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-indfb-draw-mmap-gtt:
- shard-snb: [TIMEOUT][65] ([i915#1958] / [i915#2119]) -> [SKIP][66] ([fdo#109271]) +1 similar issue
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-snb5/igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-indfb-draw-mmap-gtt.html
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-snb1/igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-indfb-draw-mmap-gtt.html
* igt@kms_psr2_su@frontbuffer:
- shard-iclb: [SKIP][67] ([fdo#109642] / [fdo#111068]) -> [SKIP][68] ([i915#1911])
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-iclb6/igt@[email protected]
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-iclb2/igt@[email protected]
* igt@runner@aborted:
- shard-apl: ([FAIL][69], [FAIL][70]) ([i915#1610] / [i915#1635] / [i915#2110]) -> [FAIL][71] ([i915#1635] / [i915#2110])
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-apl3/igt@[email protected]
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8765/shard-apl6/igt@[email protected]
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/shard-apl4/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109349]: https://bugs.freedesktop.org/show_bug.cgi?id=109349
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#109642]: https://bugs.freedesktop.org/show_bug.cgi?id=109642
[fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
[i915#118]: https://gitlab.freedesktop.org/drm/intel/issues/118
[i915#1226]: https://gitlab.freedesktop.org/drm/intel/issues/1226
[i915#1519]: https://gitlab.freedesktop.org/drm/intel/issues/1519
[i915#1610]: https://gitlab.freedesktop.org/drm/intel/issues/1610
[i915#1635]: https://gitlab.freedesktop.org/drm/intel/issues/1635
[i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
[i915#1899]: https://gitlab.freedesktop.org/drm/intel/issues/1899
[i915#1911]: https://gitlab.freedesktop.org/drm/intel/issues/1911
[i915#1958]: https://gitlab.freedesktop.org/drm/intel/issues/1958
[i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
[i915#2055]: https://gitlab.freedesktop.org/drm/intel/issues/2055
[i915#2110]: https://gitlab.freedesktop.org/drm/intel/issues/2110
[i915#2119]: https://gitlab.freedesktop.org/drm/intel/issues/2119
[i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402
[i915#454]: https://gitlab.freedesktop.org/drm/intel/issues/454
[i915#49]: https://gitlab.freedesktop.org/drm/intel/issues/49
[i915#588]: https://gitlab.freedesktop.org/drm/intel/issues/588
[i915#62]: https://gitlab.freedesktop.org/drm/intel/issues/62
[i915#658]: https://gitlab.freedesktop.org/drm/intel/issues/658
[i915#92]: https://gitlab.freedesktop.org/drm/intel/issues/92
[i915#926]: https://gitlab.freedesktop.org/drm/intel/issues/926
[i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
Participating hosts (10 -> 8)
------------------------------
Missing (2): pig-skl-6260u pig-glk-j5005
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_5740 -> IGTPW_4778
* Piglit: piglit_4509 -> None
CI-20190529: 20190529
CI_DRM_8765: dfeec97e409151bf4ef70632e20b9251f2611267 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_4778: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/index.html
IGT_5740: 6663e3ab5f77add7077711c2b649caf2bd7903c4 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4778/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Hi,
Quoted 19 lines · Bhanuprakash Modem
Even though feature Dithering is there since legacy, there is no specific IGT for this.
This patch will create New IGT for Dithering. And below is the truth table for CRTC Dithering.
|----------------|---------|-------------| | Frame buffer | Panel | Dithering | |----------------|---------|-------------| | 8 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 8 BPC | 8 BPC | No | |----------------|---------|-------------| | 8 BPC | 10 BPC | No | |----------------|---------|-------------| | 10 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 8 BPC | Yes | |----------------|---------|-------------|
Quoted 9 lines
| 10 BPC | 10 BPC | No | |----------------|---------|-------------| | 16 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 10 BPC | Yes | |----------------|---------|-------------|
Add the test name in the subject.
tests/kms_dither: <explanation>
Quoted 41 lines
Cc Swati Sharma <[email protected]>Cc Karthik B S <[email protected]>Cc Uma Shankar <[email protected]>Cc Pankaj Bharadiya <[email protected]>Signed-off-by Bhanuprakash Modem <[email protected]>--- tests/Makefile.sources | 1 + tests/kms_dither.c | 252 +++++++++++++++++++++++++++++++++++++++++ tests/meson.build | 1 + 3 files changed, 254 insertions(+)create mode 100644
tests/kms_dither.ctests/Makefile.sources +1
-0@@ -43,6 +43,7 @@ TESTS_progs = \ kms_cursor_crc \ kms_cursor_edge_walk \ kms_cursor_legacy \ + kms_dither \ kms_dp_aux_dev \ kms_dp_dsc \ kms_dp_tiled_display \tests/kms_dither.c new file +11
-0@@ -0,0 +1,252 @@ +/* +* Copyright © 2020 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person obtaining a +* copy of this software and associated documentation files (the "Software"), +* to deal in the Software without restriction, including without limitation +* the rights to use, copy, modify, merge, publish, distribute, sublicense, +* and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice (including the next
tests/kms_dither.c line 21
Quoted 10 lines
tests/kms_dither.c new file +10
-0+* paragraph) shall be included in all copies or substantial portions of the +* Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR +* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, +* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +* OTHER DEALINGS IN THE SOFTWARE.
You can mention the author here.
Quoted 114 lines
tests/kms_dither.c new file +114
-0+*/ + +#include "igt.h" +#include <fcntl.h> +#include <termios.h> +#include <unistd.h> + +IGT_TEST_DESCRIPTION ("Test Dithering block status" ); + +/* Connector BPC */ +#define IGT_CONNECTOR_BPC_6 6 +#define IGT_CONNECTOR_BPC_8 8 +#define IGT_CONNECTOR_BPC_10 10 +#define IGT_CONNECTOR_BPC_12 12 + +/* Framebuffer BPC */ +#define IGT_FRAME_BUFFER_BPC_8 8 +#define IGT_FRAME_BUFFER_BPC_10 10 +#define IGT_FRAME_BUFFER_BPC_16 16 + +/* Test flags. */ +enum { +TEST_NONE =1 <<0 , +TEST_SUSPEND =1 <<1 , +}; + +/* Common test data. */ +typedef struct data { +igt_display_t display; +igt_plane_t *primary; +igt_output_t *output; +igt_pipe_t *pipe; +drmModeModeInfo *mode; +enum pipe pipe_id; +int drm_fd; +}data_t ; + +/* Prepare test data. */ +static void prepare_test (data_t *data,igt_output_t *output,enum pipe pipe) +{ +igt_display_t *display = &data->display; + + data->pipe_id = pipe; + data->pipe = &data->display.pipes[data->pipe_id]; +igt_assert (data->pipe); + +igt_display_reset (display); + + data->output = output; +igt_assert (data->output); + + data->mode =igt_output_get_mode (data->output); +igt_assert (data->mode); + + data->primary = +igt_pipe_get_plane_type (data->pipe,DRM_PLANE_TYPE_PRIMARY ); + +igt_output_set_pipe (data->output, data->pipe_id); +} + +/* Returns the current state of dithering from the crtc debugfs. */ +static bool get_dither_state (data_t *data) +{ +char buf[256 ]; +char crtc_name[7 ]; +char *start_loc; +int fd, res; +unsigned int status; + +snprintf (crtc_name,7 ,"crtc-%d" , data->pipe_id); + fd =igt_debugfs_open (data->drm_fd, crtc_name,O_RDONLY ); +igt_assert (fd >=0 ); + + res =igt_debugfs_simple_read (fd,"dither" , buf,sizeof (buf)); +igt_require (res >0 ); +close (fd); + +igt_assert (start_loc =strstr (buf,"Dither: " )); +igt_assert_eq (sscanf (start_loc,"Dither: %u" , &status),1 ); + +return !!status; +} + +/* Returns the current and maximum bpc from the connector debugfs. */ +static unsigned int get_output_bpc (data_t *data,igt_output_t *output) +{ +char buf[256 ]; +char *start_loc; +int fd, res; +unsigned int max_bpc; + + fd =igt_debugfs_connector_dir (data->drm_fd, output->name,O_RDONLY ); +igt_assert (fd >=0 ); + + res =igt_debugfs_simple_read (fd,"output_bpc" , buf,sizeof (buf)); + +igt_require (res >0 ); + +close (fd); + +igt_assert (start_loc =strstr (buf,"Maximum: " )); +igt_assert_eq (sscanf (start_loc,"Maximum: %u" , &max_bpc),1 ); + +return max_bpc; +} + +static void test_dithering_on_output (data_t *data,igt_output_t *output, +int fb_bpc,int fb_format,int output_bpc, +uint32_t flags) +{ +igt_display_t *display = &data->display; +enum pipe pipe; +igt_fb_t fb; +int ret;
tests/kms_dither.c line 145
Quoted 10 lines
tests/kms_dither.c new file +10
-0+bool enabled; + +for_each_pipe (display, pipe) { +if (!igt_pipe_connector_valid (pipe, output)) +continue ; + +igt_info ("Dithering test execution on %s PIPE_%s\n" , + output->name,kmstest_pipe_name (pipe)); +prepare_test (data, output, pipe); +
Can we move the igt_create_fb outside the loop?
Seems redundant inside the loop as we're not changing anything here.
Any particular reason we're using 512x512 for fb?
If so, should it be a macro?
Quoted 13 lines
tests/kms_dither.c new file +13
-0+ ret =igt_create_fb (data->drm_fd,512 ,512 , fb_format, +LOCAL_DRM_FORMAT_MOD_NONE , + &fb); +igt_assert (ret); + +igt_plane_set_fb (data->primary, &fb); +igt_plane_set_size (data->primary, data->mode->hdisplay, data->mode->vdisplay); +igt_output_set_prop_value (data->output,IGT_CONNECTOR_MAX_BPC , output_bpc); +igt_display_commit2 (display, display->is_atomic ?COMMIT_ATOMIC :COMMIT_LEGACY ); + +/* Check the status of Dithering block +* If fb_bpc is greater than output_bpc, Dithering should be Enabled +* else Disabled
tests/kms_dither.c line 168
Quoted 10 lines
tests/kms_dither.c new file +10
-0+*/ + enabled =get_dither_state (data); +if (fb_bpc > output_bpc) +igt_assert_f (enabled,"(fb_%dbpc > output_%dbpc): Dither should be enabled\n" , + fb_bpc, output_bpc); +else +igt_assert_f (!enabled,"(fb_%dbpc <= output_%dbpc): Dither should be disabled\n" , + fb_bpc, output_bpc); + +igt_plane_set_fb (data->primary,NULL );
Sorry for the nitpick, but I would prefer to use PIPE_NONE here than PIPE_ANY, as it looks like PIPE_ANY is deprecated. Shouldn't matter either way :)
Quoted 12 lines
tests/kms_dither.c new file +12
-0+igt_output_set_pipe (output,PIPE_ANY ); +igt_display_commit2 (display, display->is_atomic ?COMMIT_ATOMIC :COMMIT_LEGACY ); +igt_remove_fb (data->drm_fd, &fb); + } +return ; +} + +/* Returns true if an output supports max bpc property. */ +static bool has_max_bpc (igt_output_t *output) +{ +return igt_output_has_prop (output,IGT_CONNECTOR_MAX_BPC ) && +igt_output_get_prop (output,IGT_CONNECTOR_MAX_BPC );
tests/kms_dither.c line 190
Quoted 10 lines
tests/kms_dither.c new file +10
-0+} + +static void +run_dither_test (data_t *data,int fb_bpc,int fb_format,int output_bpc, +uint32_t flags) +{ +igt_output_t *output; +unsigned int max_bpc; +int valid_outputs =0 ; +
It would be better if we can use dynamic subtests here for pipe-output combinations.
Quoted 44 lines
tests/kms_dither.c new file +44
-0+for_each_connected_output (&data->display, output) { +if (!has_max_bpc (output)) +continue ; + + max_bpc =get_output_bpc (data, output); +if (max_bpc < output_bpc) +continue ; + +test_dithering_on_output (data, output, fb_bpc, fb_format, output_bpc, flags); + valid_outputs++; + } + +igt_require_f (valid_outputs,"No connector found with MAX BPC connector property. (or) " +"No connector found with Max Panel BPC (%d) >= %d.\n" , + max_bpc, output_bpc); +} + +igt_main +{ +struct { +int bpc; +int format; + } fb_formats[] = { + {IGT_FRAME_BUFFER_BPC_8 ,DRM_FORMAT_RGB888 }, + {IGT_FRAME_BUFFER_BPC_10 ,DRM_FORMAT_XRGB2101010 }, + {IGT_FRAME_BUFFER_BPC_16 ,DRM_FORMAT_XRGB16161616F }, + }; +int output_bpc[] = { +IGT_CONNECTOR_BPC_6 , +IGT_CONNECTOR_BPC_8 , +IGT_CONNECTOR_BPC_10 + }; +int i, j; +data_t data = {0 }; + + igt_fixture { + data.drm_fd =drm_open_driver_master (DRIVER_INTEL ); +kmstest_set_vt_graphics_mode (); + +igt_display_require (&data.display, data.drm_fd); +igt_display_require_output (&data.display); + } + +for (i =0 ; i <ARRAY_SIZE (fb_formats); i++) {
tests/kms_dither.c line 244
Quoted 10 lines
tests/kms_dither.c new file +10
-0+for (j =0 ; j <ARRAY_SIZE (output_bpc); j++) { +igt_describe_f ("Framebuffer BPC:%d, Panel BPC:%d, Expected Dither:%s\n" , + fb_formats[i].bpc, output_bpc[j], + (fb_formats[i].bpc > output_bpc[j]) ?"Enable" :"Disable" ); + + igt_subtest_f("FB-%dBPC-Vs-Panel-%dBPC", fb_formats[i].bpc, output_bpc[j]) + run_dither_test(&data, + fb_formats[i].bpc, + fb_formats[i].format, + output_bpc[j],
TEST_SUSPEND looks like is unused? Do we plan to add subtests for this?
Thanks,Karthik.B.S
Quoted 14 lines
tests/kms_dither.c new file +8
-0+ TEST_NONE); + } + } + + igt_fixture { +igt_display_fini (&data.display); + } +}tests/meson.build +0
-0
tests/meson.build test_progs = [ · line 33
Quoted 7 lines
tests/meson.build +1
-0@@ -27,6 +27,7 @@ test_progs = [ 'kms_cursor_crc', 'kms_cursor_edge_walk', 'kms_cursor_legacy', + 'kms_dither', 'kms_dp_aux_dev', 'kms_dp_dsc', 'kms_dp_tiled_display',
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 41 lines
-----Original Message-----
From: B S, Karthik <[email protected]>
Sent: Tuesday, July 21, 2020 4:50 PM
To: Modem, Bhanuprakash <[email protected]>; igt- [email protected]
Cc: Sharma, Swati2 <[email protected]>; Shankar, Uma <[email protected]>; Laxminarayan Bharadiya, Pankaj <[email protected]>
Subject: Re: [PATCH i-g-t] Add new IGT test to validate crtc DitheringHi,
Quoted 19 lines · Bhanuprakash Modem
Even though feature Dithering is there since legacy, there is no specific IGT for this.
This patch will create New IGT for Dithering. And below is the truth table for CRTC Dithering.
|----------------|---------|-------------| | Frame buffer | Panel | Dithering | |----------------|---------|-------------| | 8 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 8 BPC | 8 BPC | No | |----------------|---------|-------------| | 8 BPC | 10 BPC | No | |----------------|---------|-------------| | 10 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 8 BPC | Yes | |----------------|---------|-------------|Quoted 9 lines
| 10 BPC | 10 BPC | No | |----------------|---------|-------------| | 16 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 10 BPC | Yes | |----------------|---------|-------------|
Quoted 2 lines
Add the test name in the subject.
tests/kms_dither: <explanation>
[Bhanu] Done
Quoted 57 lines
Quoted 30 lines
Cc Swati Sharma <[email protected]>Cc Karthik B S <[email protected]>Cc Uma Shankar <[email protected]>Cc Pankaj Bharadiya <[email protected]>Signed-off-by Bhanuprakash Modem <[email protected]>--- tests/Makefile.sources | 1 + tests/kms_dither.c | 252 +++++++++++++++++++++++++++++++++++++++++ tests/meson.build | 1 + 3 files changed, 254 insertions(+)create mode 100644
tests/kms_dither.ctests/Makefile.sources +1
-0@@ -43,6 +43,7 @@ TESTS_progs = \ kms_cursor_crc \ kms_cursor_edge_walk \ kms_cursor_legacy \ + kms_dither \ kms_dp_aux_dev \ kms_dp_dsc \ kms_dp_tiled_display \tests/kms_dither.c new file +0
-0tests/kms_dither.c line 4
Quoted 4 lines
tests/kms_dither.c new file +4
-0@@ -0,0 +1,252 @@ +/* +* Copyright © 2020 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person obtaining a
tests/kms_dither.c line 5
Quoted 1 line
tests/kms_dither.c new file +1
-0+* copy of this software and associated documentation files (the "Software"),
tests/kms_dither.c line 6
Quoted 1 line
tests/kms_dither.c new file +1
-0+* to deal in the Software without restriction, including without limitation
tests/kms_dither.c line 7
Quoted 1 line
tests/kms_dither.c new file +1
-0+* the rights to use, copy, modify, merge, publish, distribute, sublicense,
tests/kms_dither.c line 8
Quoted 1 line
tests/kms_dither.c new file +1
-0+* and/or sell copies of the Software, and to permit persons to whom the
tests/kms_dither.c
Quoted 3 lines
tests/kms_dither.c new file +3
-0+* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice (including the next
tests/kms_dither.c line 12
Quoted 1 line
tests/kms_dither.c new file +1
-0+* paragraph) shall be included in all copies or substantial portions of the
tests/kms_dither.c
Quoted 3 lines
tests/kms_dither.c new file +3
-0+* Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
tests/kms_dither.c line 16
Quoted 1 line
tests/kms_dither.c new file +1
-0+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
tests/kms_dither.c line 17
Quoted 1 line
tests/kms_dither.c new file +1
-0+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
Quoted 8 lines
tests/kms_dither.c line 18
Quoted 1 line
tests/kms_dither.c new file +1
-0+* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
tests/kms_dither.c line 19
Quoted 1 line
tests/kms_dither.c new file +1
-0+* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
tests/kms_dither.c line 20
Quoted 1 line
tests/kms_dither.c new file +1
-0+* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
tests/kms_dither.c line 21
Quoted 1 line
tests/kms_dither.c new file +1
-0+* OTHER DEALINGS IN THE SOFTWARE. You can mention the author here.
[Bhanu] Done
Quoted 110 lines
Quoted 29 lines
tests/kms_dither.c new file +29
-0+*/ + +#include "igt.h" +#include <fcntl.h> +#include <termios.h> +#include <unistd.h> + +IGT_TEST_DESCRIPTION ("Test Dithering block status" ); + +/* Connector BPC */ +#define IGT_CONNECTOR_BPC_6 6 +#define IGT_CONNECTOR_BPC_8 8 +#define IGT_CONNECTOR_BPC_10 10 +#define IGT_CONNECTOR_BPC_12 12 + +/* Framebuffer BPC */ +#define IGT_FRAME_BUFFER_BPC_8 8 +#define IGT_FRAME_BUFFER_BPC_10 10 +#define IGT_FRAME_BUFFER_BPC_16 16 + +/* Test flags. */ +enum { +TEST_NONE =1 <<0 , +TEST_SUSPEND =1 <<1 , +}; + +/* Common test data. */ +typedef struct data { + igt_display_t display;tests/kms_dither.c
Quoted 10 lines
tests/kms_dither.c new file +10
-0+igt_plane_t *primary; +igt_output_t *output; +igt_pipe_t *pipe; +drmModeModeInfo *mode; +enum pipe pipe_id; +int drm_fd; +} data_t; + +/* Prepare test data. */ +static void prepare_test(data_t *data, igt_output_t *output, enum pipepipe)
Quoted 43 lines
tests/kms_dither.c new file +43
-0+{ +igt_display_t *display = &data->display; + + data->pipe_id = pipe; + data->pipe = &data->display.pipes[data->pipe_id]; +igt_assert (data->pipe); + +igt_display_reset (display); + + data->output = output; +igt_assert (data->output); + + data->mode =igt_output_get_mode (data->output); +igt_assert (data->mode); + + data->primary = +igt_pipe_get_plane_type (data->pipe,DRM_PLANE_TYPE_PRIMARY ); + +igt_output_set_pipe (data->output, data->pipe_id); +} + +/* Returns the current state of dithering from the crtc debugfs. */ +static bool get_dither_state (data_t *data) +{ +char buf[256 ]; +char crtc_name[7 ]; +char *start_loc; +int fd, res; +unsigned int status; + +snprintf (crtc_name,7 ,"crtc-%d" , data->pipe_id); + fd =igt_debugfs_open (data->drm_fd, crtc_name,O_RDONLY ); +igt_assert (fd >=0 ); + + res =igt_debugfs_simple_read (fd,"dither" , buf,sizeof (buf)); +igt_require (res >0 ); +close (fd); + +igt_assert (start_loc =strstr (buf,"Dither: " )); +igt_assert_eq (sscanf (start_loc,"Dither: %u" , &status),1 ); + +return !!status; +}tests/kms_dither.c
Quoted 10 lines
tests/kms_dither.c new file +10
-0+ +/* Returns the current and maximum bpc from the connector debugfs. */ +static unsigned int get_output_bpc (data_t *data,igt_output_t *output) +{ +char buf[256 ]; +char *start_loc; +int fd, res; +unsigned int max_bpc; + + fd = igt_debugfs_connector_dir(data->drm_fd, output->name,
O_RDONLY);Quoted 5 lines
tests/kms_dither.c new file +5
-0+igt_assert (fd >=0 ); + + res =igt_debugfs_simple_read (fd,"output_bpc" , buf,sizeof (buf)); + +igt_require (res >0 );tests/kms_dither.c
Quoted 10 lines
tests/kms_dither.c new file +10
-0+ +close (fd); + +igt_assert (start_loc =strstr (buf,"Maximum: " )); +igt_assert_eq (sscanf (start_loc,"Maximum: %u" , &max_bpc),1 ); + +return max_bpc; +} + +static void test_dithering_on_output(data_t *data, igt_output_t*output,
Quoted 9 lines
tests/kms_dither.c line 137
Quoted 9 lines
tests/kms_dither.c new file +9
-0+ int fb_bpc, int fb_format, int output_bpc, + uint32_t flags) +{ + igt_display_t *display = &data->display; +enum pipe pipe; +igt_fb_t fb; +int ret; +bool enabled; +
[Bhanu] This loop should move to caller in case of dynamic subtests for pipe-output combos
Quoted 10 lines
tests/kms_dither.c line 145
Quoted 8 lines
tests/kms_dither.c new file +8
-0+for_each_pipe (display, pipe) { +if (!igt_pipe_connector_valid (pipe, output)) +continue ; + +igt_info ("Dithering test execution on %s PIPE_%s\n" , + output->name,kmstest_pipe_name (pipe)); +prepare_test (data, output, pipe); +Can we move the
igt_create_fboutside the loop?
Seems redundant inside the loop as we're not changing anything here.
[Bhanu] Done
Quoted 3 lines
Any particular reason we're using 512x512 for fb?
If so, should it be a macro?
[Bhanu] There is no particular reason, will update.
Quoted 26 lines
tests/kms_dither.c
Quoted 9 lines
tests/kms_dither.c new file +7
-0+ ret =igt_create_fb (data->drm_fd,512 ,512 , fb_format, +LOCAL_DRM_FORMAT_MOD_NONE , + &fb); +igt_assert (ret); + +igt_plane_set_fb (data->primary, &fb); + igt_plane_set_size(data->primary, data->mode->hdisplay, data-
mode->vdisplay);tests/kms_dither.c new file +1
-0+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC,
output_bpc);tests/kms_dither.c
Quoted 1 line
tests/kms_dither.c new file +1
-0+ igt_display_commit2(display, display->is_atomic ? COMMIT_ATOMIC:
COMMIT_LEGACY);tests/kms_dither.c
Quoted 3 lines
tests/kms_dither.c new file +3
-0+ +/* Check the status of Dithering block +* If fb_bpc is greater than output_bpc, Dithering should be Enabled
tests/kms_dither.c
Quoted 5 lines
tests/kms_dither.c new file +5
-0+* else Disabled +*/ + enabled =get_dither_state (data); +if (fb_bpc > output_bpc) + igt_assert_f(enabled, "(fb_%dbpc > output_%dbpc): Dithershould be enabled\n",
tests/kms_dither.c
Quoted 3 lines
tests/kms_dither.c new file +3
-0+ fb_bpc, output_bpc); + else + igt_assert_f(!enabled, "(fb_%dbpc <= output_%dbpc):Dither should be disabled\n",
Quoted 6 lines
tests/kms_dither.c line 168
Quoted 3 lines
tests/kms_dither.c new file +3
-0+ fb_bpc, output_bpc); + +igt_plane_set_fb (data->primary,NULL );Sorry for the nitpick, but I would prefer to use
PIPE_NONEhere thanPIPE_ANY, as it looks likePIPE_ANYis deprecated. Shouldn't matter either way :)
[Bhanu] Done
Quoted 18 lines
tests/kms_dither.c
Quoted 2 lines
tests/kms_dither.c new file +2
-0+igt_output_set_pipe (output,PIPE_ANY ); + igt_display_commit2(display, display->is_atomic ? COMMIT_ATOMIC:
COMMIT_LEGACY);Quoted 4 lines
tests/kms_dither.c new file +4
-0+igt_remove_fb (data->drm_fd, &fb); + } +return ; +}tests/kms_dither.c
Quoted 10 lines
tests/kms_dither.c new file +10
-0+ +/* Returns true if an output supports max bpc property. */ +static bool has_max_bpc (igt_output_t *output) +{ +return igt_output_has_prop (output,IGT_CONNECTOR_MAX_BPC ) && +igt_output_get_prop (output,IGT_CONNECTOR_MAX_BPC ); +} + +static void +run_dither_test(data_t *data, int fb_bpc, int fb_format, int
output_bpc,
Quoted 8 lines
tests/kms_dither.c line 190
Quoted 6 lines
tests/kms_dither.c new file +6
-0+ uint32_t flags) +{ +igt_output_t *output; +unsigned int max_bpc; +int valid_outputs =0 ; +It would be better if we can use dynamic subtests here for pipe-output combinations.
[Bhanu] That’s good idea
Quoted 17 lines
tests/kms_dither.c
Quoted 9 lines
tests/kms_dither.c new file +9
-0+for_each_connected_output (&data->display, output) { +if (!has_max_bpc (output)) +continue ; + + max_bpc =get_output_bpc (data, output); +if (max_bpc < output_bpc) +continue ; + + test_dithering_on_output(data, output, fb_bpc, fb_format,
output_bpc, flags);tests/kms_dither.c
Quoted 4 lines
tests/kms_dither.c new file +4
-0+ valid_outputs++; + } + + igt_require_f(valid_outputs, "No connector found with MAX BPCconnector property. (or) "
tests/kms_dither.c
Quoted 1 line
tests/kms_dither.c new file +1
-0+ "No connector found with Max Panel BPC (%d) >=%d.\n",
Quoted 9 lines
tests/kms_dither.c line 213
Quoted 9 lines
tests/kms_dither.c new file +9
-0+ max_bpc, output_bpc); +} + +igt_main +{ +struct { +int bpc; +int format; + } fb_formats[] = {
[Bhanu] @Shankar, Uma Are these formats are good to go?
Quoted 27 lines
Quoted 13 lines
tests/kms_dither.c new file +13
-0+ { IGT_FRAME_BUFFER_BPC_8, DRM_FORMAT_RGB888 }, + { IGT_FRAME_BUFFER_BPC_10, DRM_FORMAT_XRGB2101010 }, + { IGT_FRAME_BUFFER_BPC_16, DRM_FORMAT_XRGB16161616F }, + }; +int output_bpc[] = { +IGT_CONNECTOR_BPC_6 , +IGT_CONNECTOR_BPC_8 , +IGT_CONNECTOR_BPC_10 + }; +int i, j; +data_t data = {0 }; + + igt_fixture {tests/kms_dither.c
Quoted 10 lines
tests/kms_dither.c new file +10
-0+ data.drm_fd =drm_open_driver_master (DRIVER_INTEL ); +kmstest_set_vt_graphics_mode (); + +igt_display_require (&data.display, data.drm_fd); +igt_display_require_output (&data.display); + } + +for (i =0 ; i <ARRAY_SIZE (fb_formats); i++) { +for (j =0 ; j <ARRAY_SIZE (output_bpc); j++) { + igt_describe_f("Framebuffer BPC:%d, Panel BPC:%d,Expected Dither:%s\n",
tests/kms_dither.c
Quoted 2 lines
tests/kms_dither.c new file +2
-0+ fb_formats[i].bpc, output_bpc[j], + (fb_formats[i].bpc > output_bpc[j]) ?"Enable": "Disable");
Quoted 8 lines
tests/kms_dither.c
Quoted 2 lines
tests/kms_dither.c new file +2
-0+ + igt_subtest_f("FB-%dBPC-Vs-Panel-%dBPC",fb_formats[i].bpc, output_bpc[j])
tests/kms_dither.c line 244
Quoted 4 lines
tests/kms_dither.c new file +4
-0+ run_dither_test(&data, + fb_formats[i].bpc, + fb_formats[i].format, + output_bpc[j],
TEST_SUSPENDlooks like is unused? Do we plan to add subtests for this?
[Bhanu] We may need to add suspend/resume tests.
Quoted 16 lines
Thanks,
Karthik.B.SQuoted 13 lines
tests/kms_dither.c new file +8
-0+ TEST_NONE); + } + } + + igt_fixture { +igt_display_fini (&data.display); + } +}tests/meson.build +0
-0@@ -27,6 +27,7 @@ test_progs = [
Quoted 8 lines
tests/meson.build test_progs = [ · line 33
Quoted 8 lines
tests/meson.build +1
-0'kms_cursor_crc', 'kms_cursor_edge_walk', 'kms_cursor_legacy', + 'kms_dither', 'kms_dp_aux_dev', 'kms_dp_dsc', 'kms_dp_tiled_display',
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 1/1 tests/kms_dither: Add new IGT test to validate crtc Dithering
In reply to Bhanuprakash ModemEven though feature Dithering is there since legacy, there is no specific IGT for this.
This patch will create New IGT for Dithering. And below is the truth table for CRTC Dithering.
|----------------|---------|-------------| | Frame buffer | Panel | Dithering | |----------------|---------|-------------| | 8 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 8 BPC | 8 BPC | No | |----------------|---------|-------------| | 8 BPC | 10 BPC | No | |----------------|---------|-------------| | 10 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 10 BPC | No | |----------------|---------|-------------| | 16 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 10 BPC | Yes | |----------------|---------|-------------|
v2:
* Fix commit message (Karthik)
* Add file author (Karthik)
* Dynamic subtests for pipe-output combinations (Karthik)
* Update deprecated pipe name (Karthik)
* Remove redundant fb creation logic (Karthik)
--- tests/Makefile.sources | 1 + tests/kms_dither.c | 257 +++++++++++++++++++++++++++++++++++++++++ tests/meson.build | 1 + 3 files changed, 259 insertions(+) create mode 100644 tests/kms_dither.c
tests/Makefile.sources +1 -0
@@ -43,6 +43,7 @@ TESTS_progs = \ kms_cursor_crc \ kms_cursor_edge_walk \ kms_cursor_legacy \ + kms_dither \ kms_dp_aux_dev \ kms_dp_dsc \ kms_dp_tiled_display \
tests/kms_dither.c new file +257 -0
257 lines not on this page · raw message
tests/meson.build +1 -0
@@ -27,6 +27,7 @@ test_progs = [ 'kms_cursor_crc', 'kms_cursor_edge_walk', 'kms_cursor_legacy', + 'kms_dither', 'kms_dp_aux_dev', 'kms_dp_dsc', 'kms_dp_tiled_display',
Signature · 6 lines
2.20.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t] tests/kms_dither: Add new IGT test to validate crtc Dithering
Hi,
Please find my review comments inline.
Quoted 2 lines · Bhanuprakash Modem
Even though feature Dithering is there since legacy, there is no specific IGT for this.
Can you please give little bit intro about dithering?
Quoted 4 lines
This patch will create New IGT for Dithering. And below is the truth table for CRTC Dithering.
It will be nice if you can explain logic behind following truth table here? Like you mentioned
"If fb BPC is greater than the panel BPC, driver should enable dithering else disable."
Quoted 13 lines
|----------------|---------|-------------| | Frame buffer | Panel | Dithering | |----------------|---------|-------------| | 8 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 8 BPC | 8 BPC | No | |----------------|---------|-------------| | 8 BPC | 10 BPC | No | |----------------|---------|-------------| | 10 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 8 BPC | Yes | |----------------|---------|-------------|
Quoted 8 lines
| 10 BPC | 10 BPC | No | |----------------|---------|-------------| | 16 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 10 BPC | Yes | |----------------|---------|-------------|
Also why are we missing 12BPC FB?
Quoted 53 lines
v2:
* Fix commit message (Karthik)
* Add file author (Karthik)
* Dynamic subtests for pipe-output combinations (Karthik)
* Update deprecated pipe name (Karthik)
* Remove redundant fb creation logic (Karthik)Cc Swati Sharma <[email protected]>Cc Karthik B S <[email protected]>Cc Uma Shankar <[email protected]>Cc Pankaj Bharadiya <[email protected]>Signed-off-by Bhanuprakash Modem <[email protected]>--- tests/Makefile.sources | 1 + tests/kms_dither.c | 257 +++++++++++++++++++++++++++++++++++++++++ tests/meson.build | 1 + 3 files changed, 259 insertions(+)create mode 100644
tests/kms_dither.ctests/Makefile.sources +1
-0@@ -43,6 +43,7 @@ TESTS_progs = \ kms_cursor_crc \ kms_cursor_edge_walk \ kms_cursor_legacy \ + kms_dither \ kms_dp_aux_dev \ kms_dp_dsc \ kms_dp_tiled_display \tests/kms_dither.c new file +15
-0@@ -0,0 +1,257 @@ +/* +* Copyright © 2020 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person obtaining a +* copy of this software and associated documentation files (the "Software"), +* to deal in the Software without restriction, including without limitation +* the rights to use, copy, modify, merge, publish, distribute, sublicense, +* and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice (including the next +* paragraph) shall be included in all copies or substantial portions of the +* Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
tests/kms_dither.c line 25
Quoted 10 lines
tests/kms_dither.c new file +10
-0+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR +* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, +* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +* OTHER DEALINGS IN THE SOFTWARE. +* +* Authors: +* Bhanuprakash Modem <[email protected]> +*
Extra \n?
Quoted 9 lines
tests/kms_dither.c new file +9
-0+*/ + +#include "igt.h" +#include <fcntl.h> +#include <termios.h> +#include <unistd.h> + +IGT_TEST_DESCRIPTION ("Test Dithering block status" ); +
tests/kms_dither.c line 44
Quoted 10 lines
tests/kms_dither.c new file +10
-0+/* Connector BPC */ +#define IGT_CONNECTOR_BPC_6 6 +#define IGT_CONNECTOR_BPC_8 8 +#define IGT_CONNECTOR_BPC_10 10 +#define IGT_CONNECTOR_BPC_12 12 + +/* Framebuffer BPC */ +#define IGT_FRAME_BUFFER_BPC_8 8 +#define IGT_FRAME_BUFFER_BPC_10 10 +#define IGT_FRAME_BUFFER_BPC_16 16
Should 12 bpc FB be added?
Quoted 56 lines
tests/kms_dither.c new file +56
-0+ +/* Test flags. */ +enum { +TEST_NONE =1 <<0 , +TEST_SUSPEND =1 <<1 , +}; + +/* Common test data. */ +typedef struct data { +igt_display_t display; +igt_plane_t *primary; +igt_output_t *output; +igt_pipe_t *pipe; +drmModeModeInfo *mode; +enum pipe pipe_id; +int drm_fd; +igt_fb_t fb; +}data_t ; + +/* Prepare test data. */ +static void prepare_test (data_t *data,igt_output_t *output,enum pipe pipe) +{ +igt_display_t *display = &data->display; + + data->pipe_id = pipe; + data->pipe = &data->display.pipes[data->pipe_id]; +igt_assert (data->pipe); + +igt_display_reset (display); + + data->output = output; +igt_assert (data->output); + + data->mode =igt_output_get_mode (data->output); +igt_assert (data->mode); + + data->primary = +igt_pipe_get_plane_type (data->pipe,DRM_PLANE_TYPE_PRIMARY ); + +igt_output_set_pipe (data->output, data->pipe_id); +} + +/* Returns the current state of dithering from the crtc debugfs. */ +static bool get_dither_state (data_t *data) +{ +char buf[256 ]; +char crtc_name[7 ]; +char *start_loc; +int fd, res; +unsigned int status; + +snprintf (crtc_name,7 ,"crtc-%d" , data->pipe_id); + fd =igt_debugfs_open (data->drm_fd, crtc_name,O_RDONLY ); +igt_assert (fd >=0 ); + + res =igt_debugfs_simple_read (fd,"dither" , buf,sizeof (buf));
tests/kms_dither.c line 110
Quoted 10 lines
tests/kms_dither.c new file +10
-0+igt_require (res >0 ); +close (fd); + +igt_assert (start_loc =strstr (buf,"Dither: " )); +igt_assert_eq (sscanf (start_loc,"Dither: %u" , &status),1 ); + +return !!status; +} + +/* Returns the current and maximum bpc from the connector debugfs. */
Func is not returning current bpc only max_bpc is getting returned. Correct comment.
Quoted 43 lines
tests/kms_dither.c new file +43
-0+static unsigned int get_output_bpc (data_t *data,igt_output_t *output) +{ +char buf[256 ]; +char *start_loc; +int fd, res; +unsigned int max_bpc; + + fd =igt_debugfs_connector_dir (data->drm_fd, output->name,O_RDONLY ); +igt_assert (fd >=0 ); + + res =igt_debugfs_simple_read (fd,"output_bpc" , buf,sizeof (buf)); + +igt_require (res >0 ); + +close (fd); + +igt_assert (start_loc =strstr (buf,"Maximum: " )); +igt_assert_eq (sscanf (start_loc,"Maximum: %u" , &max_bpc),1 ); + +return max_bpc; +} + +static void test_dithering (data_t *data,enum pipe pipe, +igt_output_t *output,int fb_bpc, +int output_bpc,uint32_t flags) +{ +igt_display_t *display = &data->display; +bool enabled; + +igt_info ("Dithering test execution on %s PIPE_%s\n" , + output->name,kmstest_pipe_name (pipe)); +prepare_test (data, output, pipe); + +igt_plane_set_fb (data->primary, &data->fb); +igt_plane_set_size (data->primary, data->mode->hdisplay, data->mode->vdisplay); +igt_output_set_prop_value (data->output,IGT_CONNECTOR_MAX_BPC , output_bpc); +igt_display_commit2 (display, display->is_atomic ?COMMIT_ATOMIC :COMMIT_LEGACY ); + +/* Check the status of Dithering block +* If fb_bpc is greater than output_bpc, Dithering should be Enabled +* else Disabled +*/ + enabled =get_dither_state (data);
tests/kms_dither.c line 163
Quoted 10 lines
tests/kms_dither.c new file +10
-0+if (fb_bpc > output_bpc) +igt_assert_f (enabled,"(fb_%dbpc > output_%dbpc): Dither should be enabled\n" , + fb_bpc, output_bpc); +else +igt_assert_f (!enabled,"(fb_%dbpc <= output_%dbpc): Dither should be disabled\n" , + fb_bpc, output_bpc); + +igt_plane_set_fb (data->primary,NULL ); +igt_output_set_pipe (output,PIPE_NONE ); +igt_display_commit2 (display, display->is_atomic ?COMMIT_ATOMIC :COMMIT_LEGACY );
Insert a \n here.
Quoted 53 lines
tests/kms_dither.c new file +53
-0+return ; +} + +/* Returns true if an output supports max bpc property. */ +static bool has_max_bpc (igt_output_t *output) +{ +return igt_output_has_prop (output,IGT_CONNECTOR_MAX_BPC ) && +igt_output_get_prop (output,IGT_CONNECTOR_MAX_BPC ); +} + +static void +run_dither_test (data_t *data,int fb_bpc,int fb_format,int output_bpc, +uint32_t flags) +{ +igt_output_t *output; +igt_display_t *display = &data->display; +enum pipe pipe; +unsigned int max_bpc; +int valid_outputs =0 ; + +for_each_connected_output (display, output) { +if (!has_max_bpc (output)) +continue ; + + max_bpc =get_output_bpc (data, output); +if (max_bpc < output_bpc) +continue ; + +igt_assert (igt_create_fb (data->drm_fd,512 ,512 , fb_format, +LOCAL_DRM_FORMAT_MOD_NONE , + &data->fb) + ); +for_each_pipe (display, pipe) { + igt_dynamic_f("connector-%s-pipe-%s", output->name, kmstest_pipe_name(pipe)) { +if (!igt_pipe_connector_valid (pipe, output)) +continue ; +test_dithering (data, pipe, output, fb_bpc, output_bpc, flags); + } + } +igt_remove_fb (data->drm_fd, &data->fb); + + valid_outputs++; + } + +igt_require_f (valid_outputs,"No connector found with MAX BPC connector property. (or) " +"No connector found with Max Panel BPC (%d) >= %d.\n" , + max_bpc, output_bpc); +} + +igt_main +{ +struct { +int bpc;
tests/kms_dither.c line 227
Quoted 10 lines
tests/kms_dither.c new file +10
-0+int format; + } fb_formats[] = { + { IGT_FRAME_BUFFER_BPC_8, DRM_FORMAT_RGB888 }, + { IGT_FRAME_BUFFER_BPC_10, DRM_FORMAT_XRGB2101010 }, + { IGT_FRAME_BUFFER_BPC_16, DRM_FORMAT_XRGB16161616F }, + } > + int output_bpc[] = { + IGT_CONNECTOR_BPC_6, + IGT_CONNECTOR_BPC_8, + IGT_CONNECTOR_BPC_10 + };
Should these strucs be defined outside igt_main()?
Quoted 35 lines
tests/kms_dither.c new file +29
-0+int i, j; +data_t data = {0 }; + + igt_fixture { + data.drm_fd =drm_open_driver_master (DRIVER_INTEL ); +kmstest_set_vt_graphics_mode (); + +igt_display_require (&data.display, data.drm_fd); +igt_display_require_output (&data.display); + } + +for (i =0 ; i <ARRAY_SIZE (fb_formats); i++) { +for (j =0 ; j <ARRAY_SIZE (output_bpc); j++) { +igt_describe_f ("Framebuffer BPC:%d, Panel BPC:%d, Expected Dither:%s\n" , + fb_formats[i].bpc, output_bpc[j], + (fb_formats[i].bpc > output_bpc[j]) ? "Enable": "Disable"); > + + igt_subtest_with_dynamic_f("FB-%dBPC-Vs-Panel-%dBPC", fb_formats[i].bpc, output_bpc[j]) +run_dither_test (&data, + fb_formats[i].bpc, + fb_formats[i].format, + output_bpc[j], +TEST_NONE ); + } + } + + igt_fixture { +igt_display_fini (&data.display); + } +}tests/meson.build +0
-0
tests/meson.build test_progs = [ · line 33
Quoted 7 lines
tests/meson.build +1
-0@@ -27,6 +27,7 @@ test_progs = [ 'kms_cursor_crc', 'kms_cursor_edge_walk', 'kms_cursor_legacy', + 'kms_dither', 'kms_dp_aux_dev', 'kms_dp_dsc', 'kms_dp_tiled_display',
Overall it looks good. However on CI tests are getting skipped. Can you please get IGT+Kernel patches tested together?
Signature · 5 lines
~Swati Sharma _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t] tests/kms_dither: Add new IGT test to validate crtc Dithering
Quoted 54 lines
-----Original Message-----
From: Sharma, Swati2 <[email protected]>
Sent: Wednesday, July 22, 2020 8:45 PM
To: Modem, Bhanuprakash <[email protected]>; igt- [email protected]
Cc: B S, Karthik <[email protected]>; Shankar, Uma <[email protected]>; Laxminarayan Bharadiya, Pankaj <[email protected]>
Subject: Re: [PATCH i-g-t] tests/kms_dither: Add new IGT test to validate crtc DitheringHi,
Please find my review comments inline.
Quoted 2 lines · Bhanuprakash Modem
Even though feature Dithering is there since legacy, there is no specific IGT for this.
Can you please give little bit intro about dithering?
Quoted 4 lines
This patch will create New IGT for Dithering. And below is the truth table for CRTC Dithering.
It will be nice if you can explain logic behind following truth table here?
Like you mentioned
"If fb BPC is greater than the panel BPC, driver should enable dithering else disable."Quoted 13 lines
|----------------|---------|-------------| | Frame buffer | Panel | Dithering | |----------------|---------|-------------| | 8 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 8 BPC | 8 BPC | No | |----------------|---------|-------------| | 8 BPC | 10 BPC | No | |----------------|---------|-------------| | 10 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 8 BPC | Yes | |----------------|---------|-------------|Quoted 8 lines
| 10 BPC | 10 BPC | No | |----------------|---------|-------------| | 16 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 10 BPC | Yes | |----------------|---------|-------------|
Quoted 1 line
Also why are we missing 12BPC FB?
[Bhanu] I think 12 BPC format is not available for RGB.
Quoted 93 lines
Quoted 39 lines
v2:
* Fix commit message (Karthik)
* Add file author (Karthik)
* Dynamic subtests for pipe-output combinations (Karthik)
* Update deprecated pipe name (Karthik)
* Remove redundant fb creation logic (Karthik)Cc Swati Sharma <[email protected]>Cc Karthik B S <[email protected]>Cc Uma Shankar <[email protected]>Cc Pankaj Bharadiya <[email protected]>Signed-off-by Bhanuprakash Modem <[email protected]>--- tests/Makefile.sources | 1 + tests/kms_dither.c | 257 +++++++++++++++++++++++++++++++++++++++++ tests/meson.build | 1 + 3 files changed, 259 insertions(+)create mode 100644
tests/kms_dither.ctests/Makefile.sources +1
-0@@ -43,6 +43,7 @@ TESTS_progs = \ kms_cursor_crc \ kms_cursor_edge_walk \ kms_cursor_legacy \ + kms_dither \ kms_dp_aux_dev \ kms_dp_dsc \ kms_dp_tiled_display \tests/kms_dither.c new file +0
-0tests/kms_dither.c line 4
Quoted 4 lines
tests/kms_dither.c new file +4
-0@@ -0,0 +1,257 @@ +/* +* Copyright © 2020 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person obtaining a
tests/kms_dither.c line 5
Quoted 1 line
tests/kms_dither.c new file +1
-0+* copy of this software and associated documentation files (the "Software"),
tests/kms_dither.c line 6
Quoted 1 line
tests/kms_dither.c new file +1
-0+* to deal in the Software without restriction, including without limitation
tests/kms_dither.c line 7
Quoted 1 line
tests/kms_dither.c new file +1
-0+* the rights to use, copy, modify, merge, publish, distribute, sublicense,
tests/kms_dither.c line 8
Quoted 1 line
tests/kms_dither.c new file +1
-0+* and/or sell copies of the Software, and to permit persons to whom the
tests/kms_dither.c
Quoted 3 lines
tests/kms_dither.c new file +3
-0+* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice (including the next
tests/kms_dither.c line 12
Quoted 1 line
tests/kms_dither.c new file +1
-0+* paragraph) shall be included in all copies or substantial portions of the
tests/kms_dither.c
Quoted 3 lines
tests/kms_dither.c new file +3
-0+* Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
tests/kms_dither.c line 16
Quoted 1 line
tests/kms_dither.c new file +1
-0+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
tests/kms_dither.c line 17
Quoted 1 line
tests/kms_dither.c new file +1
-0+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
tests/kms_dither.c line 18
Quoted 1 line
tests/kms_dither.c new file +1
-0+* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
tests/kms_dither.c line 19
Quoted 1 line
tests/kms_dither.c new file +1
-0+* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
tests/kms_dither.c line 20
Quoted 1 line
tests/kms_dither.c new file +1
-0+* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
tests/kms_dither.c line 25
Quoted 5 lines
tests/kms_dither.c new file +5
-0+* OTHER DEALINGS IN THE SOFTWARE. +* +* Authors: +* Bhanuprakash Modem <[email protected]> +* Extra \n?
Quoted 13 lines
tests/kms_dither.c new file +13
-0+*/ + +#include "igt.h" +#include <fcntl.h> +#include <termios.h> +#include <unistd.h> + +IGT_TEST_DESCRIPTION ("Test Dithering block status" ); + +/* Connector BPC */ +#define IGT_CONNECTOR_BPC_6 6 +#define IGT_CONNECTOR_BPC_8 8 +#define IGT_CONNECTOR_BPC_10 10
Quoted 8 lines
tests/kms_dither.c line 44
Quoted 6 lines
tests/kms_dither.c new file +6
-0+#define IGT_CONNECTOR_BPC_12 12 + +/* Framebuffer BPC */ +#define IGT_FRAME_BUFFER_BPC_8 8 +#define IGT_FRAME_BUFFER_BPC_10 10 +#define IGT_FRAME_BUFFER_BPC_16 16Should 12 bpc FB be added?
[Bhanu] 12 bpc format is not there in RGB, shall we rename these macros like IGT_RGB_FRAME_BUFFER_BPC_8 etc..?
Quoted 197 lines
Quoted 12 lines
tests/kms_dither.c new file +11
-0+ +/* Test flags. */ +enum { +TEST_NONE =1 <<0 , +TEST_SUSPEND =1 <<1 , +}; + +/* Common test data. */ +typedef struct data { + igt_display_t display; + igt_plane_t *primary;tests/kms_dither.c
Quoted 10 lines
tests/kms_dither.c new file +10
-0+igt_output_t *output; +igt_pipe_t *pipe; +drmModeModeInfo *mode; +enum pipe pipe_id; +int drm_fd; +igt_fb_t fb; +} data_t; + +/* Prepare test data. */ +static void prepare_test(data_t *data, igt_output_t *output, enum pipepipe)
Quoted 35 lines
tests/kms_dither.c new file +35
-0+{ +igt_display_t *display = &data->display; + + data->pipe_id = pipe; + data->pipe = &data->display.pipes[data->pipe_id]; +igt_assert (data->pipe); + +igt_display_reset (display); + + data->output = output; +igt_assert (data->output); + + data->mode =igt_output_get_mode (data->output); +igt_assert (data->mode); + + data->primary = +igt_pipe_get_plane_type (data->pipe,DRM_PLANE_TYPE_PRIMARY ); + +igt_output_set_pipe (data->output, data->pipe_id); +} + +/* Returns the current state of dithering from the crtc debugfs. */ +static bool get_dither_state (data_t *data) +{ +char buf[256 ]; +char crtc_name[7 ]; +char *start_loc; +int fd, res; +unsigned int status; + +snprintf (crtc_name,7 ,"crtc-%d" , data->pipe_id); + fd =igt_debugfs_open (data->drm_fd, crtc_name,O_RDONLY ); +igt_assert (fd >=0 ); + + res =igt_debugfs_simple_read (fd,"dither" , buf,sizeof (buf));tests/kms_dither.c line 110
Quoted 10 lines
tests/kms_dither.c new file +10
-0+igt_require (res >0 ); +close (fd); + +igt_assert (start_loc =strstr (buf,"Dither: " )); +igt_assert_eq (sscanf (start_loc,"Dither: %u" , &status),1 ); + +return !!status; +} + +/* Returns the current and maximum bpc from the connector debugfs. */ Func is not returning current bpc only
max_bpcis getting returned. Correct comment.tests/kms_dither.c
Quoted 8 lines
tests/kms_dither.c new file +8
-0+static unsigned int get_output_bpc (data_t *data,igt_output_t *output) +{ +char buf[256 ]; +char *start_loc; +int fd, res; +unsigned int max_bpc; + + fd = igt_debugfs_connector_dir(data->drm_fd, output->name,
O_RDONLY);Quoted 28 lines
tests/kms_dither.c new file +27
-0+igt_assert (fd >=0 ); + + res =igt_debugfs_simple_read (fd,"output_bpc" , buf,sizeof (buf)); + +igt_require (res >0 ); + +close (fd); + +igt_assert (start_loc =strstr (buf,"Maximum: " )); +igt_assert_eq (sscanf (start_loc,"Maximum: %u" , &max_bpc),1 ); + +return max_bpc; +} + +static void test_dithering (data_t *data,enum pipe pipe, +igt_output_t *output,int fb_bpc, +int output_bpc,uint32_t flags) +{ +igt_display_t *display = &data->display; +bool enabled; + +igt_info ("Dithering test execution on %s PIPE_%s\n" , + output->name,kmstest_pipe_name (pipe)); +prepare_test (data, output, pipe); + +igt_plane_set_fb (data->primary, &data->fb); + igt_plane_set_size(data->primary, data->mode->hdisplay, data->mode-vdisplay);
tests/kms_dither.c
Quoted 1 line
tests/kms_dither.c new file +1
-0+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC,
output_bpc);tests/kms_dither.c
Quoted 1 line
tests/kms_dither.c new file +1
-0+ igt_display_commit2(display, display->is_atomic ? COMMIT_ATOMIC :
COMMIT_LEGACY);tests/kms_dither.c
Quoted 8 lines
tests/kms_dither.c new file +8
-0+ +/* Check the status of Dithering block +* If fb_bpc is greater than output_bpc, Dithering should be Enabled +* else Disabled +*/ + enabled =get_dither_state (data); +if (fb_bpc > output_bpc) + igt_assert_f(enabled, "(fb_%dbpc > output_%dbpc): Dither shouldbe enabled\n",
tests/kms_dither.c
Quoted 3 lines
tests/kms_dither.c new file +3
-0+ fb_bpc, output_bpc); + else + igt_assert_f(!enabled, "(fb_%dbpc <= output_%dbpc): Dithershould be disabled\n",
tests/kms_dither.c
Quoted 5 lines
tests/kms_dither.c new file +5
-0+ fb_bpc, output_bpc); + +igt_plane_set_fb (data->primary,NULL ); +igt_output_set_pipe (output,PIPE_NONE ); + igt_display_commit2(display, display->is_atomic ? COMMIT_ATOMIC :
COMMIT_LEGACY);Insert a \n here.
tests/kms_dither.c
Quoted 12 lines
tests/kms_dither.c new file +12
-0+return ; +} + +/* Returns true if an output supports max bpc property. */ +static bool has_max_bpc (igt_output_t *output) +{ +return igt_output_has_prop (output,IGT_CONNECTOR_MAX_BPC ) && +igt_output_get_prop (output,IGT_CONNECTOR_MAX_BPC ); +} + +static void +run_dither_test(data_t *data, int fb_bpc, int fb_format, int
output_bpc,Quoted 12 lines
tests/kms_dither.c new file +12
-0+ uint32_t flags) +{ +igt_output_t *output; +igt_display_t *display = &data->display; +enum pipe pipe; +unsigned int max_bpc; +int valid_outputs =0 ; + +for_each_connected_output (display, output) { +if (!has_max_bpc (output)) +continue ; +tests/kms_dither.c
Quoted 10 lines
tests/kms_dither.c new file +10
-0+ max_bpc =get_output_bpc (data, output); +if (max_bpc < output_bpc) +continue ; + +igt_assert (igt_create_fb (data->drm_fd,512 ,512 , fb_format, +LOCAL_DRM_FORMAT_MOD_NONE , + &data->fb) + ); +for_each_pipe (display, pipe) { + igt_dynamic_f("connector-%s-pipe-%s", output->name,
kmstest_pipe_name(pipe)) {tests/kms_dither.c
Quoted 3 lines
tests/kms_dither.c new file +3
-0+if (!igt_pipe_connector_valid (pipe, output)) +continue ; + test_dithering(data, pipe, output, fb_bpc,
output_bpc, flags);tests/kms_dither.c
Quoted 8 lines
tests/kms_dither.c new file +8
-0+ } + } +igt_remove_fb (data->drm_fd, &data->fb); + + valid_outputs++; + } + + igt_require_f(valid_outputs, "No connector found with MAX BPCconnector property. (or) "
tests/kms_dither.c
Quoted 1 line
tests/kms_dither.c new file +1
-0+ "No connector found with Max Panel BPC (%d) >=%d.\n",
Quoted 11 lines
tests/kms_dither.c new file +11
-0+ max_bpc, output_bpc); +} + +igt_main +{ +struct { +int bpc; +int format; + } fb_formats[] = { + {IGT_FRAME_BUFFER_BPC_8 ,DRM_FORMAT_RGB888 }, + {IGT_FRAME_BUFFER_BPC_10 ,DRM_FORMAT_XRGB2101010 },
Quoted 8 lines
tests/kms_dither.c line 227
Quoted 6 lines
tests/kms_dither.c new file +6
-0+ { IGT_FRAME_BUFFER_BPC_16, DRM_FORMAT_XRGB16161616F }, + } > + int output_bpc[] = { +IGT_CONNECTOR_BPC_6 , +IGT_CONNECTOR_BPC_8 , + IGT_CONNECTOR_BPC_10 + };Should these strucs be defined outside
igt_main()?
[Bhanu] No other function is directly accessing these structs, I think this can be ok to keep inside the main().
Quoted 49 lines
Quoted 5 lines
tests/kms_dither.c new file +4
-0+int i, j; +data_t data = {0 }; + + igt_fixture {tests/kms_dither.c
Quoted 10 lines
tests/kms_dither.c new file +10
-0+ data.drm_fd =drm_open_driver_master (DRIVER_INTEL ); +kmstest_set_vt_graphics_mode (); + +igt_display_require (&data.display, data.drm_fd); +igt_display_require_output (&data.display); + } + +for (i =0 ; i <ARRAY_SIZE (fb_formats); i++) { +for (j =0 ; j <ARRAY_SIZE (output_bpc); j++) { + igt_describe_f("Framebuffer BPC:%d, Panel BPC:%d,Expected Dither:%s\n",
tests/kms_dither.c
Quoted 2 lines
tests/kms_dither.c new file +2
-0+ fb_formats[i].bpc, output_bpc[j], + (fb_formats[i].bpc > output_bpc[j]) ?"Enable": "Disable"); > +
tests/kms_dither.c
Quoted 1 line
tests/kms_dither.c new file +1
-0+ igt_subtest_with_dynamic_f("FB-%dBPC-Vs-Panel-%dBPC",fb_formats[i].bpc, output_bpc[j])
Quoted 18 lines
tests/kms_dither.c new file +12
-0+run_dither_test (&data, + fb_formats[i].bpc, + fb_formats[i].format, + output_bpc[j], +TEST_NONE ); + } + } + + igt_fixture { +igt_display_fini (&data.display); + } +}tests/meson.build +0
-0tests/meson.build test_progs = [ · line 33
Quoted 7 lines
tests/meson.build +1
-0@@ -27,6 +27,7 @@ test_progs = [ 'kms_cursor_crc', 'kms_cursor_edge_walk', 'kms_cursor_legacy', + 'kms_dither', 'kms_dp_aux_dev', 'kms_dp_dsc', 'kms_dp_tiled_display',Overall it looks good. However on CI tests are getting skipped. Can you please get IGT+Kernel patches tested together?
Quoted 2 lines
--
~Swati Sharma
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 1/1 tests/kms_dither: New IGT to validate crtc Dithering
In reply to Bhanuprakash ModemMany of the display devices have color format support less than the color format of the input data (Ex: 8-bit input data and 6-bit display color depth). Then the input data will be either truncated or rounded, but this approach usually causes loss of detail and also produce large banded areas of a single color that significantly differs from the original image.
Dithering is a technique used to enhance these colors by creating the illusion of smoothness by adjusting the nearby pixel color. For Eg: Converting 8-bit to 6-bit by modifying the pixel information.
Dithering should be enabled when a panel color depth is lower than the color depth of the framebuffer.
Even though feature Dithering is there since legacy, there is no specific IGT for this. This patch will create New IGT for Dithering. And below is the truth table for CRTC Dithering.
|----------------|---------|-------------| | Frame buffer | Panel | Dithering | |----------------|---------|-------------| | 8 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 8 BPC | 8 BPC | No | |----------------|---------|-------------| | 8 BPC | 10 BPC | No | |----------------|---------|-------------| | 10 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 10 BPC | No | |----------------|---------|-------------| | 16 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 10 BPC | Yes | |----------------|---------|-------------|
v2:
* Fix commit message (Karthik)
* Add file author (Karthik)
* Dynamic subtests for pipe-output combinations (Karthik)
* Update deprecated pipe name (Karthik)
* Remove redundant fb creation logic (Karthik)
v3:
* Use for_each_pipe_with_valid_output() to simplify the logic (Bhanu)
* Remove magic numbers to create fb (Karthik)
* Fix typos & comments (Swati)
--- tests/Makefile.sources | 1 + tests/kms_dither.c | 256 +++++++++++++++++++++++++++++++++++++++++ tests/meson.build | 1 + 3 files changed, 258 insertions(+) create mode 100644 tests/kms_dither.c
tests/Makefile.sources +1 -0
@@ -43,6 +43,7 @@ TESTS_progs = \ kms_cursor_crc \ kms_cursor_edge_walk \ kms_cursor_legacy \ + kms_dither \ kms_dp_aux_dev \ kms_dp_dsc \ kms_dp_tiled_display \
tests/kms_dither.c new file +256 -0
256 lines not on this page · raw message
tests/meson.build +1 -0
@@ -27,6 +27,7 @@ test_progs = [ 'kms_cursor_crc', 'kms_cursor_edge_walk', 'kms_cursor_legacy', + 'kms_dither', 'kms_dp_aux_dev', 'kms_dp_dsc', 'kms_dp_tiled_display',
Signature · 6 lines
2.20.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t] tests/kms_dither: New IGT to validate crtc Dithering
Quoted 283 lines · Bhanuprakash Modem
Many of the display devices have color format support less than the color format of the input data (Ex: 8-bit input data and 6-bit display color depth). Then the input data will be either truncated or rounded, but this approach usually causes loss of detail and also produce large banded areas of a single color that significantly differs from the original image.
Dithering is a technique used to enhance these colors by creating the illusion of smoothness by adjusting the nearby pixel color. For Eg: Converting 8-bit to 6-bit by modifying the pixel information.
Dithering should be enabled when a panel color depth is lower than the color depth of the framebuffer.
Even though feature Dithering is there since legacy, there is no specific IGT for this. This patch will create New IGT for Dithering. And below is the truth table for CRTC Dithering.
|----------------|---------|-------------| | Frame buffer | Panel | Dithering | |----------------|---------|-------------| | 8 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 8 BPC | 8 BPC | No | |----------------|---------|-------------| | 8 BPC | 10 BPC | No | |----------------|---------|-------------| | 10 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 10 BPC | No | |----------------|---------|-------------| | 16 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 10 BPC | Yes | |----------------|---------|-------------|v2:
* Fix commit message (Karthik)
* Add file author (Karthik)
* Dynamic subtests for pipe-output combinations (Karthik)
* Update deprecated pipe name (Karthik)
* Remove redundant fb creation logic (Karthik)v3:
* Usefor_each_pipe_with_valid_output()to simplify the logic (Bhanu)
* Remove magic numbers to create fb (Karthik)
* Fix typos & comments (Swati)Cc Swati Sharma <[email protected]>Cc Karthik B S <[email protected]>Cc Uma Shankar <[email protected]>Cc Pankaj Bharadiya <[email protected]>Cc Petri Latvala <[email protected]>Cc Arkadiusz Hiler <[email protected]>Signed-off-by Bhanuprakash Modem <[email protected]>--- tests/Makefile.sources | 1 + tests/kms_dither.c | 256 +++++++++++++++++++++++++++++++++++++++++ tests/meson.build | 1 + 3 files changed, 258 insertions(+) create mode 100644 tests/kms_dither.ctests/Makefile.sources +1
-0@@ -43,6 +43,7 @@ TESTS_progs = \ kms_cursor_crc \ kms_cursor_edge_walk \ kms_cursor_legacy \ + kms_dither \ kms_dp_aux_dev \ kms_dp_dsc \ kms_dp_tiled_display \tests/kms_dither.c new file +199
-0@@ -0,0 +1,256 @@ +/* +* Copyright © 2020 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person obtaining a +* copy of this software and associated documentation files (the "Software"), +* to deal in the Software without restriction, including without limitation +* the rights to use, copy, modify, merge, publish, distribute, sublicense, +* and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice (including the next +* paragraph) shall be included in all copies or substantial portions of the +* Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR +* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, +* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +* OTHER DEALINGS IN THE SOFTWARE. +* +* Authors: +* Bhanuprakash Modem <[email protected]> +* +*/ + +#include "igt.h" +#include <fcntl.h> +#include <termios.h> +#include <unistd.h> + +IGT_TEST_DESCRIPTION ("Test Dithering block status" ); + +/* Connector BPC */ +#define IGT_CONNECTOR_BPC_6 6 +#define IGT_CONNECTOR_BPC_8 8 +#define IGT_CONNECTOR_BPC_10 10 +#define IGT_CONNECTOR_BPC_12 12 + +/* Framebuffer BPC */ +#define IGT_FRAME_BUFFER_BPC_8 8 +#define IGT_FRAME_BUFFER_BPC_10 10 +#define IGT_FRAME_BUFFER_BPC_16 16 + +/* Test flags. */ +enum { +TEST_NONE =1 <<0 , +TEST_SUSPEND =1 <<1 , +}; + +/* Common test data. */ +typedef struct data { +igt_display_t display; +igt_plane_t *primary; +igt_output_t *output; +igt_pipe_t *pipe; +drmModeModeInfo *mode; +enum pipe pipe_id; +int drm_fd; +igt_fb_t fb; +}data_t ; + +/* Prepare test data. */ +static void prepare_test (data_t *data,igt_output_t *output,enum pipe pipe) +{ +igt_display_t *display = &data->display; + + data->pipe_id = pipe; + data->pipe = &data->display.pipes[data->pipe_id]; +igt_assert (data->pipe); + +igt_display_reset (display); + + data->output = output; +igt_assert (data->output); + + data->mode =igt_output_get_mode (data->output); +igt_assert (data->mode); + + data->primary = +igt_pipe_get_plane_type (data->pipe,DRM_PLANE_TYPE_PRIMARY ); + +igt_output_set_pipe (data->output, data->pipe_id); +} + +/* Returns the current state of dithering from the crtc debugfs. */ +static bool get_dither_state (data_t *data) +{ +char buf[256 ]; +char crtc_name[7 ]; +char *start_loc; +int fd, res; +unsigned int status; + +snprintf (crtc_name,7 ,"crtc-%d" , data->pipe_id); + fd =igt_debugfs_open (data->drm_fd, crtc_name,O_RDONLY ); +igt_assert (fd >=0 ); + + res =igt_debugfs_simple_read (fd,"dither" , buf,sizeof (buf)); +igt_require (res >0 ); +close (fd); + +igt_assert (start_loc =strstr (buf,"Dither: " )); +igt_assert_eq (sscanf (start_loc,"Dither: %u" , &status),1 ); + +return !!status; +} + +/* Returns the maximum bpc from the connector debugfs. */ +static unsigned int get_output_bpc (data_t *data,igt_output_t *output) +{ +char buf[256 ]; +char *start_loc; +int fd, res; +unsigned int max_bpc; + + fd =igt_debugfs_connector_dir (data->drm_fd, output->name,O_RDONLY ); +igt_assert (fd >=0 ); + + res =igt_debugfs_simple_read (fd,"output_bpc" , buf,sizeof (buf)); + +igt_require (res >0 ); + +close (fd); + +igt_assert (start_loc =strstr (buf,"Maximum: " )); +igt_assert_eq (sscanf (start_loc,"Maximum: %u" , &max_bpc),1 ); + +return max_bpc; +} + +static void test_dithering (data_t *data,enum pipe pipe, +igt_output_t *output, +int fb_bpc,int fb_format, +int output_bpc,uint32_t flags) +{ +igt_display_t *display = &data->display; +bool enabled; + +igt_info ("Dithering test execution on %s PIPE_%s\n" , + output->name,kmstest_pipe_name (pipe)); +prepare_test (data, output, pipe); + +igt_assert (igt_create_fb (data->drm_fd, data->mode->hdisplay, + data->mode->vdisplay, fb_format, +LOCAL_DRM_FORMAT_MOD_NONE , &data->fb)); +igt_plane_set_fb (data->primary, &data->fb); +igt_plane_set_size (data->primary, data->mode->hdisplay, data->mode->vdisplay); +igt_output_set_prop_value (data->output,IGT_CONNECTOR_MAX_BPC , output_bpc); +igt_display_commit2 (display, display->is_atomic ?COMMIT_ATOMIC :COMMIT_LEGACY ); + +/* Check the status of Dithering block +* If fb_bpc is greater than output_bpc, Dithering should be Enabled +* else Disabled +*/ + enabled =get_dither_state (data); +if (fb_bpc > output_bpc) +igt_assert_f (enabled,"(fb_%dbpc > output_%dbpc): Dither should be enabled\n" , + fb_bpc, output_bpc); +else +igt_assert_f (!enabled,"(fb_%dbpc <= output_%dbpc): Dither should be disabled\n" , + fb_bpc, output_bpc); + +igt_plane_set_fb (data->primary,NULL ); +igt_output_set_pipe (output,PIPE_NONE ); +igt_display_commit2 (display, display->is_atomic ?COMMIT_ATOMIC :COMMIT_LEGACY ); + +igt_remove_fb (data->drm_fd, &data->fb); + +return ; +} + +/* Returns true if an output supports max bpc property. */ +static bool has_max_bpc (igt_output_t *output) +{ +return igt_output_has_prop (output,IGT_CONNECTOR_MAX_BPC ) && +igt_output_get_prop (output,IGT_CONNECTOR_MAX_BPC ); +} + +static void +run_dither_test (data_t *data,int fb_bpc,int fb_format,int output_bpc, +uint32_t flags) +{ +igt_output_t *output; +igt_display_t *display = &data->display; +enum pipe pipe; +unsigned int max_bpc; +int valid_outputs =0 ; + +for_each_pipe_with_valid_output (display, pipe, output) { +if (!has_max_bpc (output)) +continue ; + + max_bpc =get_output_bpc (data, output); +if (max_bpc < output_bpc) +continue ; + +igt_dynamic_f ("%s-on-pipe-%s" , output->name,kmstest_pipe_name (pipe))
tests/kms_dither.c line 209
Quoted 10 lines
tests/kms_dither.c new file +10
-0+if (igt_pipe_connector_valid (pipe, output)) +test_dithering (data, pipe, output, fb_bpc, + fb_format, output_bpc, flags); + + valid_outputs++; + } + +igt_require_f (valid_outputs,"No connector found with MAX BPC connector property. (or) " +"No connector found with Max Panel BPC (%d) >= %d.\n" , + max_bpc, output_bpc);
You don't need to explicitly igt_require that valid outputs were found. igt_subtest_with_dynamic automatically produces a skip if it doesn't enter any igt_dynamic blocks.
Signature · 5 lines
Petri Latvala _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t] tests/kms_dither: New IGT to validate crtc Dithering
In reply to Bhanuprakash ModemQuoted 227 lines
-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Friday, July 24, 2020 4:25 AM
To: Modem, Bhanuprakash <[email protected]>; igt- [email protected]
Cc: Sharma, Swati2 <[email protected]>; B S, Karthik <[email protected]>; Shankar, Uma <[email protected]>; Laxminarayan Bharadiya, Pankaj <[email protected]>; Latvala, Petri <[email protected]>; Hiler, Arkadiusz <[email protected]>
Subject: [PATCH i-g-t] tests/kms_dither: New IGT to validate crtc DitheringMany of the display devices have color format support less than the color format of the input data (Ex: 8-bit input data and 6-bit display color depth). Then the input data will be either truncated or rounded, but this approach usually causes loss of detail and also produce large banded areas of a single color that significantly differs from the original image.
Dithering is a technique used to enhance these colors by creating the illusion of smoothness by adjusting the nearby pixel color.
For Eg: Converting 8-bit to 6-bit by modifying the pixel information.Dithering should be enabled when a panel color depth is lower than the color depth of the framebuffer.
Even though feature Dithering is there since legacy, there is no specific IGT for this. This patch will create New IGT for Dithering.
And below is the truth table for CRTC Dithering.|----------------|---------|-------------| | Frame buffer | Panel | Dithering | |----------------|---------|-------------| | 8 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 8 BPC | 8 BPC | No | |----------------|---------|-------------| | 8 BPC | 10 BPC | No | |----------------|---------|-------------| | 10 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 10 BPC | No | |----------------|---------|-------------| | 16 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 10 BPC | Yes | |----------------|---------|-------------|v2:
* Fix commit message (Karthik)
* Add file author (Karthik)
* Dynamic subtests for pipe-output combinations (Karthik)
* Update deprecated pipe name (Karthik)
* Remove redundant fb creation logic (Karthik)v3:
* Usefor_each_pipe_with_valid_output()to simplify the logic (Bhanu)
* Remove magic numbers to create fb (Karthik)
* Fix typos & comments (Swati)Cc Swati Sharma <[email protected]>Cc Karthik B S <[email protected]>Cc Uma Shankar <[email protected]>Cc Pankaj Bharadiya <[email protected]>Cc Petri Latvala <[email protected]>Cc Arkadiusz Hiler <[email protected]>Signed-off-by Bhanuprakash Modem <[email protected]>--- tests/Makefile.sources | 1 + tests/kms_dither.c | 256 +++++++++++++++++++++++++++++++++++++++++ tests/meson.build | 1 + 3 files changed, 258 insertions(+) create mode 100644 tests/kms_dither.ctests/Makefile.sources index renamed from tests/Makefile.sources +0
-0
0653c3d3..e816037c100644tests/Makefile.sources +1
-0@@ -43,6 +43,7 @@ TESTS_progs = \ kms_cursor_crc \ kms_cursor_edge_walk \ kms_cursor_legacy \ + kms_dither \ kms_dp_aux_dev \ kms_dp_dsc \ kms_dp_tiled_display \tests/kms_dither.c new file mode 100644 index renamed from tests/kms_dither.c +0
-000000000..22d96d34
tests/kms_dither.c new file +32
-0@@ -0,0 +1,256 @@ +/* +* Copyright © 2020 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person +obtaining a +* copy of this software and associated documentation files (the +"Software"), +* to deal in the Software without restriction, including without +limitation +* the rights to use, copy, modify, merge, publish, distribute, +sublicense, +* and/or sell copies of the Software, and to permit persons to whom +the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice (including the +next +* paragraph) shall be included in all copies or substantial portions +of the +* Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT +SHALL +* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, +DAMAGES OR +* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR +OTHERWISE, +* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
tests/kms_dither.c new file +63
-0+OR +* OTHER DEALINGS IN THE SOFTWARE. +* +* Authors: +* Bhanuprakash Modem <[email protected]> +* +*/ + +#include "igt.h" +#include <fcntl.h> +#include <termios.h> +#include <unistd.h> + +IGT_TEST_DESCRIPTION ("Test Dithering block status" ); + +/* Connector BPC */ +#define IGT_CONNECTOR_BPC_6 6 +#define IGT_CONNECTOR_BPC_8 8 +#define IGT_CONNECTOR_BPC_10 10 +#define IGT_CONNECTOR_BPC_12 12 + +/* Framebuffer BPC */ +#define IGT_FRAME_BUFFER_BPC_8 8 +#define IGT_FRAME_BUFFER_BPC_10 10 +#define IGT_FRAME_BUFFER_BPC_16 16 + +/* Test flags. */ +enum { +TEST_NONE =1 <<0 , +TEST_SUSPEND =1 <<1 , +}; + +/* Common test data. */ +typedef struct data { +igt_display_t display; +igt_plane_t *primary; +igt_output_t *output; +igt_pipe_t *pipe; +drmModeModeInfo *mode; +enum pipe pipe_id; +int drm_fd; +igt_fb_t fb; +}data_t ; + +/* Prepare test data. */ +static void prepare_test (data_t *data,igt_output_t *output,enum pipe +pipe) { +igt_display_t *display = &data->display; + + data->pipe_id = pipe; + data->pipe = &data->display.pipes[data->pipe_id]; +igt_assert (data->pipe); + +igt_display_reset (display); + + data->output = output; +igt_assert (data->output); + + data->mode =igt_output_get_mode (data->output); +igt_assert (data->mode); + + data->primary = + igt_pipe_get_plane_type(data->pipe,
DRM_PLANE_TYPE_PRIMARY);tests/kms_dither.c new file +33
-0+ +igt_output_set_pipe (data->output, data->pipe_id); } + +/* Returns the current state of dithering from the crtc debugfs. */ +static bool get_dither_state (data_t *data) { +char buf[256 ]; +char crtc_name[7 ]; +char *start_loc; +int fd, res; +unsigned int status; + +snprintf (crtc_name,7 ,"crtc-%d" , data->pipe_id); + fd =igt_debugfs_open (data->drm_fd, crtc_name,O_RDONLY ); +igt_assert (fd >=0 ); + + res =igt_debugfs_simple_read (fd,"dither" , buf,sizeof (buf)); +igt_require (res >0 ); +close (fd); + +igt_assert (start_loc =strstr (buf,"Dither: " )); +igt_assert_eq (sscanf (start_loc,"Dither: %u" , &status),1 ); + +return !!status; +} + +/* Returns the maximum bpc from the connector debugfs. */ static +unsigned int get_output_bpc (data_t *data,igt_output_t *output) { +char buf[256 ]; +char *start_loc; +int fd, res; +unsigned int max_bpc; + + fd = igt_debugfs_connector_dir(data->drm_fd, output->name,
O_RDONLY);
tests/kms_dither.c line 124
Quoted 6 lines
tests/kms_dither.c new file +6
-0+igt_assert (fd >=0 ); + + res =igt_debugfs_simple_read (fd,"output_bpc" , buf,sizeof (buf)); + +igt_require (res >0 ); +
Drop the extra line.
Quoted 28 lines
tests/kms_dither.c new file +25
-0+close (fd); + +igt_assert (start_loc =strstr (buf,"Maximum: " )); +igt_assert_eq (sscanf (start_loc,"Maximum: %u" , &max_bpc),1 ); + +return max_bpc; +} + +static void test_dithering (data_t *data,enum pipe pipe, +igt_output_t *output, +int fb_bpc,int fb_format, +int output_bpc,uint32_t flags) +{ +igt_display_t *display = &data->display; +bool enabled; + +igt_info ("Dithering test execution on %s PIPE_%s\n" , + output->name,kmstest_pipe_name (pipe)); +prepare_test (data, output, pipe); + +igt_assert (igt_create_fb (data->drm_fd, data->mode->hdisplay, + data->mode->vdisplay, fb_format, +LOCAL_DRM_FORMAT_MOD_NONE , &data->fb)); +igt_plane_set_fb (data->primary, &data->fb); + igt_plane_set_size(data->primary, data->mode->hdisplay, data->mode-Quoted 1 line
vdisplay);
tests/kms_dither.c new file +1
-0+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC,
output_bpc);
tests/kms_dither.c line 153
Quoted 4 lines
tests/kms_dither.c new file +4
-0+igt_display_commit2 (display, display->is_atomic ?COMMIT_ATOMIC : +COMMIT_LEGACY ); + +/* Check the status of Dithering block
Adopt proper multi line comment style.
tests/kms_dither.c
Quoted 12 lines
tests/kms_dither.c new file +6
-0+* If fb_bpc is greater than output_bpc, Dithering should be Enabled +* else Disabled +*/ + enabled =get_dither_state (data); +if (fb_bpc > output_bpc) + igt_assert_f(enabled, "(fb_%dbpc > output_%dbpc): Dithershould be enabled\n",
tests/kms_dither.c new file +3
-0+ fb_bpc, output_bpc); + else + igt_assert_f(!enabled, "(fb_%dbpc <= output_%dbpc): Dithershould be disabled\n",
tests/kms_dither.c new file +1
-0+ fb_bpc, output_bpc);
This looks good to validate whether driver returned the right status. For features like these, I feel we also should try to see the effectiveness of dithering. I would propose to have some kind of reference images and compare them with the output what we get. A chamelium based test can be planned to see the really effectiveness of dithering. We can have reference golden image and do a crc check with the output grabbed from sink (through Chamelium).
Quoted 16 lines
tests/kms_dither.c new file +16
-0+igt_plane_set_fb (data->primary,NULL ); +igt_output_set_pipe (output,PIPE_NONE ); +igt_display_commit2 (display, display->is_atomic ?COMMIT_ATOMIC : +COMMIT_LEGACY ); + +igt_remove_fb (data->drm_fd, &data->fb); + +return ; +} + +/* Returns true if an output supports max bpc property. */ static bool +has_max_bpc (igt_output_t *output) { +return igt_output_has_prop (output,IGT_CONNECTOR_MAX_BPC ) && +igt_output_get_prop (output,IGT_CONNECTOR_MAX_BPC ); } + +static void
tests/kms_dither.c line 191
Quoted 10 lines
tests/kms_dither.c new file +10
-0+run_dither_test(data_t *data, int fb_bpc, int fb_format, int output_bpc, + uint32_t flags) +{ +igt_output_t *output; +igt_display_t *display = &data->display; +enum pipe pipe; +unsigned int max_bpc; +int valid_outputs =0 ; + +for_each_pipe_with_valid_output (display, pipe, output) {
Not sure if we should test on so many combinations, it may be overkill I believe and waste CI execution time. May be we can limit it to just 1 pipe as we have done for plane. Generally the same logic is applied on all pipes so if it works on 1 pipe, should work on others as well.
Quoted 28 lines
tests/kms_dither.c new file +8
-0+if (!has_max_bpc (output)) +continue ; + + max_bpc =get_output_bpc (data, output); +if (max_bpc < output_bpc) +continue ; + + igt_dynamic_f("%s-on-pipe-%s", output->name,
kmstest_pipe_name(pipe))tests/kms_dither.c new file +8
-0+if (igt_pipe_connector_valid (pipe, output)) +test_dithering (data, pipe, output, fb_bpc, + fb_format, output_bpc, flags); + + valid_outputs++; + } + + igt_require_f(valid_outputs, "No connector found with MAX BPCconnector property. (or) "
tests/kms_dither.c new file +1
-0+ "No connector found with Max Panel BPC (%d)Quoted 1 line
= %d.\n",
tests/kms_dither.c new file +8
-0+ max_bpc, output_bpc); +} + +igt_main +{ +struct { +int bpc; +int format;
tests/kms_dither.c line 226
Quoted 10 lines
tests/kms_dither.c new file +10
-0+ } fb_formats[] = { + { IGT_FRAME_BUFFER_BPC_8, DRM_FORMAT_RGB888 }, + { IGT_FRAME_BUFFER_BPC_10, DRM_FORMAT_XRGB2101010 }, + { IGT_FRAME_BUFFER_BPC_16, DRM_FORMAT_XRGB16161616F }, + }; + int output_bpc[] = { + IGT_CONNECTOR_BPC_6, + IGT_CONNECTOR_BPC_8, + IGT_CONNECTOR_BPC_10 + };
I think you can keep these out of main and have them defined as static.
Also, please test this out on real monitors and check the behavior.
Quoted 46 lines
tests/kms_dither.c new file +14
-0+int i, j; +data_t data = {0 }; + + igt_fixture { + data.drm_fd =drm_open_driver_master (DRIVER_INTEL ); +kmstest_set_vt_graphics_mode (); + +igt_display_require (&data.display, data.drm_fd); +igt_display_require_output (&data.display); + } + +for (i =0 ; i <ARRAY_SIZE (fb_formats); i++) { +for (j =0 ; j <ARRAY_SIZE (output_bpc); j++) { + igt_describe_f("Framebuffer BPC:%d, Panel BPC:%d,Expected Dither:%s\n",
tests/kms_dither.c new file +2
-0+ fb_formats[i].bpc, output_bpc[j], + (fb_formats[i].bpc > output_bpc[j]) ?"Enable": "Disable");
tests/kms_dither.c new file +2
-0+ + igt_subtest_with_dynamic_f("FB-%dBPC-Vs-Panel-%dBPC", fb_formats[i].bpc, output_bpc[j])
tests/kms_dither.c new file +12
-0+run_dither_test (&data, + fb_formats[i].bpc, + fb_formats[i].format, + output_bpc[j], +TEST_NONE ); + } + } + + igt_fixture { +igt_display_fini (&data.display); + } +}tests/meson.build index cfe508c4..05a9cfb8 renamed from tests/meson.build +0
-0100644
tests/meson.build +1
-1@@ -27,6 +27,7 @@ test_progs = [ 'kms_cursor_crc', 'kms_cursor_edge_walk', 'kms_cursor_legacy', + 'kms_dither', 'kms_dp_aux_dev', 'kms_dp_dsc', 'kms_dp_tiled_display', --
Quoted 1 line
2.20.1
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t] tests/kms_dither: New IGT to validate crtc Dithering
Quoted 293 lines
-----Original Message-----
From: Shankar, Uma <[email protected]>
Sent: Friday, July 24, 2020 4:41 PM
To: Modem, Bhanuprakash <[email protected]>; igt- [email protected]
Cc: Sharma, Swati2 <[email protected]>; B S, Karthik <[email protected]>; Laxminarayan Bharadiya, Pankaj <[email protected]>; Latvala, Petri <[email protected]>; Hiler, Arkadiusz <[email protected]>
Subject: RE: [PATCH i-g-t] tests/kms_dither: New IGT to validate crtc DitheringQuoted 8 lines
-----Original Message-----
From: Modem, Bhanuprakash <[email protected]>
Sent: Friday, July 24, 2020 4:25 AM
To: Modem, Bhanuprakash <[email protected]>; igt- [email protected]
Cc: Sharma, Swati2 <[email protected]>; B S, Karthik <[email protected]>; Shankar, Uma <[email protected]>; Laxminarayan Bharadiya, PankajQuoted 3 lines
Latvala, Petri <[email protected]>; Hiler, Arkadiusz <[email protected]>
Subject: [PATCH i-g-t] tests/kms_dither: New IGT to validate crtcDithering
Quoted 2 lines
Many of the display devices have color format support less than the
color format
Quoted 1 line
of the input data (Ex: 8-bit input data and 6-bit display color depth).
Then the
Quoted 1 line
input data will be either truncated or rounded, but this approach
usually causes
Quoted 1 line
loss of detail and also produce large banded areas of a single color
that
Quoted 3 lines
significantly differs from the original image.
Dithering is a technique used to enhance these colors by creating the
illusion of
Quoted 4 lines
smoothness by adjusting the nearby pixel color.
For Eg: Converting 8-bit to 6-bit by modifying the pixel information.Dithering should be enabled when a panel color depth is lower than the
color
Quoted 3 lines
depth of the framebuffer.
Even though feature Dithering is there since legacy, there is no
specific IGT for
tests/kms_dither.c new file mode
Quoted 64 lines
this. This patch will create New IGT for Dithering. And below is the truth table for CRTC Dithering.
|----------------|---------|-------------| | Frame buffer | Panel | Dithering | |----------------|---------|-------------| | 8 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 8 BPC | 8 BPC | No | |----------------|---------|-------------| | 8 BPC | 10 BPC | No | |----------------|---------|-------------| | 10 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 10 BPC | No | |----------------|---------|-------------| | 16 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 10 BPC | Yes | |----------------|---------|-------------|v2:
* Fix commit message (Karthik)
* Add file author (Karthik)
* Dynamic subtests for pipe-output combinations (Karthik)
* Update deprecated pipe name (Karthik)
* Remove redundant fb creation logic (Karthik)v3:
* Usefor_each_pipe_with_valid_output()to simplify the logic (Bhanu)
* Remove magic numbers to create fb (Karthik)
* Fix typos & comments (Swati)Cc Swati Sharma <[email protected]>Cc Karthik B S <[email protected]>Cc Uma Shankar <[email protected]>Cc Pankaj Bharadiya <[email protected]>Cc Petri Latvala <[email protected]>Cc Arkadiusz Hiler <[email protected]>Signed-off-by Bhanuprakash Modem <[email protected]>--- tests/Makefile.sources | 1 + tests/kms_dither.c | 256 +++++++++++++++++++++++++++++++++++++++++ tests/meson.build | 1 + 3 files changed, 258 insertions(+) create mode 100644 tests/kms_dither.ctests/Makefile.sources index renamed from tests/Makefile.sources +0
-0
0653c3d3..e816037c100644tests/Makefile.sources +1
-0@@ -43,6 +43,7 @@ TESTS_progs = \ kms_cursor_crc \ kms_cursor_edge_walk \ kms_cursor_legacy \ + kms_dither \ kms_dp_aux_dev \ kms_dp_dsc \ kms_dp_tiled_display \tests/kms_dither.c new file mode renamed from tests/kms_dither.c +0
-0100644 index
Quoted 135 lines
00000000..22d96d34
tests/kms_dither.c new file +32
-0@@ -0,0 +1,256 @@ +/* +* Copyright © 2020 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person +obtaining a +* copy of this software and associated documentation files (the +"Software"), +* to deal in the Software without restriction, including without +limitation +* the rights to use, copy, modify, merge, publish, distribute, +sublicense, +* and/or sell copies of the Software, and to permit persons to whom +the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice (including the +next +* paragraph) shall be included in all copies or substantial portions +of the +* Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT +SHALL +* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, +DAMAGES OR +* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR +OTHERWISE, +* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
tests/kms_dither.c new file +63
-0+OR +* OTHER DEALINGS IN THE SOFTWARE. +* +* Authors: +* Bhanuprakash Modem <[email protected]> +* +*/ + +#include "igt.h" +#include <fcntl.h> +#include <termios.h> +#include <unistd.h> + +IGT_TEST_DESCRIPTION ("Test Dithering block status" ); + +/* Connector BPC */ +#define IGT_CONNECTOR_BPC_6 6 +#define IGT_CONNECTOR_BPC_8 8 +#define IGT_CONNECTOR_BPC_10 10 +#define IGT_CONNECTOR_BPC_12 12 + +/* Framebuffer BPC */ +#define IGT_FRAME_BUFFER_BPC_8 8 +#define IGT_FRAME_BUFFER_BPC_10 10 +#define IGT_FRAME_BUFFER_BPC_16 16 + +/* Test flags. */ +enum { +TEST_NONE =1 <<0 , +TEST_SUSPEND =1 <<1 , +}; + +/* Common test data. */ +typedef struct data { +igt_display_t display; +igt_plane_t *primary; +igt_output_t *output; +igt_pipe_t *pipe; +drmModeModeInfo *mode; +enum pipe pipe_id; +int drm_fd; +igt_fb_t fb; +}data_t ; + +/* Prepare test data. */ +static void prepare_test (data_t *data,igt_output_t *output,enum pipe +pipe) { +igt_display_t *display = &data->display; + + data->pipe_id = pipe; + data->pipe = &data->display.pipes[data->pipe_id]; +igt_assert (data->pipe); + +igt_display_reset (display); + + data->output = output; +igt_assert (data->output); + + data->mode =igt_output_get_mode (data->output); +igt_assert (data->mode); + + data->primary = + igt_pipe_get_plane_type(data->pipe,
DRM_PLANE_TYPE_PRIMARY);tests/kms_dither.c new file +33
-0+ +igt_output_set_pipe (data->output, data->pipe_id); } + +/* Returns the current state of dithering from the crtc debugfs. */ +static bool get_dither_state (data_t *data) { +char buf[256 ]; +char crtc_name[7 ]; +char *start_loc; +int fd, res; +unsigned int status; + +snprintf (crtc_name,7 ,"crtc-%d" , data->pipe_id); + fd =igt_debugfs_open (data->drm_fd, crtc_name,O_RDONLY ); +igt_assert (fd >=0 ); + + res =igt_debugfs_simple_read (fd,"dither" , buf,sizeof (buf)); +igt_require (res >0 ); +close (fd); + +igt_assert (start_loc =strstr (buf,"Dither: " )); +igt_assert_eq (sscanf (start_loc,"Dither: %u" , &status),1 ); + +return !!status; +} + +/* Returns the maximum bpc from the connector debugfs. */ static +unsigned int get_output_bpc (data_t *data,igt_output_t *output) { +char buf[256 ]; +char *start_loc; +int fd, res; +unsigned int max_bpc; + + fd = igt_debugfs_connector_dir(data->drm_fd, output->name,
O_RDONLY);tests/kms_dither.c line 124
Quoted 6 lines
tests/kms_dither.c new file +6
-0+igt_assert (fd >=0 ); + + res =igt_debugfs_simple_read (fd,"output_bpc" , buf,sizeof (buf)); + +igt_require (res >0 ); +Drop the extra line.
Quoted 28 lines
tests/kms_dither.c new file +25
-0+close (fd); + +igt_assert (start_loc =strstr (buf,"Maximum: " )); +igt_assert_eq (sscanf (start_loc,"Maximum: %u" , &max_bpc),1 ); + +return max_bpc; +} + +static void test_dithering (data_t *data,enum pipe pipe, +igt_output_t *output, +int fb_bpc,int fb_format, +int output_bpc,uint32_t flags) +{ +igt_display_t *display = &data->display; +bool enabled; + +igt_info ("Dithering test execution on %s PIPE_%s\n" , + output->name,kmstest_pipe_name (pipe)); +prepare_test (data, output, pipe); + +igt_assert (igt_create_fb (data->drm_fd, data->mode->hdisplay, + data->mode->vdisplay, fb_format, +LOCAL_DRM_FORMAT_MOD_NONE , &data->fb)); +igt_plane_set_fb (data->primary, &data->fb); + igt_plane_set_size(data->primary, data->mode->hdisplay, data->mode-Quoted 1 line
vdisplay);
tests/kms_dither.c new file +1
-0+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC,
output_bpc);tests/kms_dither.c line 153
Quoted 4 lines
tests/kms_dither.c new file +4
-0+igt_display_commit2 (display, display->is_atomic ?COMMIT_ATOMIC : +COMMIT_LEGACY ); + +/* Check the status of Dithering block Adopt proper multi line comment style.
Quoted 16 lines
tests/kms_dither.c
Quoted 12 lines
tests/kms_dither.c new file +6
-0+* If fb_bpc is greater than output_bpc, Dithering should be Enabled +* else Disabled +*/ + enabled =get_dither_state (data); +if (fb_bpc > output_bpc) + igt_assert_f(enabled, "(fb_%dbpc > output_%dbpc): Dithershould be enabled\n",
tests/kms_dither.c new file +3
-0+ fb_bpc, output_bpc); + else + igt_assert_f(!enabled, "(fb_%dbpc <= output_%dbpc): Dithershould be disabled\n",
tests/kms_dither.c new file +1
-0+ fb_bpc, output_bpc);This looks good to validate whether driver returned the right status. For features like these, I feel we also should try to see the effectiveness of dithering.
[Bhanu] May be we can do this as part of manual E2E testing.
Quoted 8 lines
I would propose to have some kind of reference images and compare them
with the output what we get. A chamelium based test can be planned to see the really
effectiveness of dithering. We can have reference golden image and do a crc check with
the output grabbed from sink (through Chamelium).
[Bhanu] I think it is very difficult to maintain the same reference images all over the ci machines. Yeah, we can do this exercise with our local env.
Quoted 29 lines
Quoted 8 lines
tests/kms_dither.c new file +7
-0+igt_plane_set_fb (data->primary,NULL ); +igt_output_set_pipe (output,PIPE_NONE ); +igt_display_commit2 (display, display->is_atomic ?COMMIT_ATOMIC : +COMMIT_LEGACY ); + +igt_remove_fb (data->drm_fd, &data->fb); +tests/kms_dither.c
Quoted 10 lines
tests/kms_dither.c new file +10
-0+return ; +} + +/* Returns true if an output supports max bpc property. */ static bool +has_max_bpc (igt_output_t *output) { +return igt_output_has_prop (output,IGT_CONNECTOR_MAX_BPC ) && +igt_output_get_prop (output,IGT_CONNECTOR_MAX_BPC ); } + +static void +run_dither_test(data_t *data, int fb_bpc, int fb_format, int
output_bpc,tests/kms_dither.c line 191
Quoted 9 lines
tests/kms_dither.c new file +9
-0+ uint32_t flags) +{ +igt_output_t *output; +igt_display_t *display = &data->display; +enum pipe pipe; +unsigned int max_bpc; +int valid_outputs =0 ; + +for_each_pipe_with_valid_output (display, pipe, output) {
Quoted 7 lines
Not sure if we should test on so many combinations, it may be overkill I believe
and waste CI execution time. May be we can limit it to just 1 pipe as we have done for
plane. Generally the same logic is applied on all pipes so if it works on 1 pipe, should work
on others as well.
[Bhanu] I'll limit the execution to single pipe.
Quoted 33 lines
Quoted 33 lines
tests/kms_dither.c new file +8
-0+if (!has_max_bpc (output)) +continue ; + + max_bpc =get_output_bpc (data, output); +if (max_bpc < output_bpc) +continue ; + + igt_dynamic_f("%s-on-pipe-%s", output->name,
kmstest_pipe_name(pipe))tests/kms_dither.c new file +8
-0+if (igt_pipe_connector_valid (pipe, output)) +test_dithering (data, pipe, output, fb_bpc, + fb_format, output_bpc, flags); + + valid_outputs++; + } + + igt_require_f(valid_outputs, "No connector found with MAX BPCconnector property. (or) "
tests/kms_dither.c new file +1
-0+ "No connector found with Max Panel BPC (%d)Quoted 1 line
= %d.\n",
tests/kms_dither.c new file +12
-0+ max_bpc, output_bpc); +} + +igt_main +{ +struct { +int bpc; +int format; + } fb_formats[] = { + {IGT_FRAME_BUFFER_BPC_8 ,DRM_FORMAT_RGB888 }, + {IGT_FRAME_BUFFER_BPC_10 ,DRM_FORMAT_XRGB2101010 }, + {IGT_FRAME_BUFFER_BPC_16 ,DRM_FORMAT_XRGB16161616F },
Quoted 8 lines
tests/kms_dither.c line 226
Quoted 6 lines
tests/kms_dither.c new file +6
-0+ }; +int output_bpc[] = { +IGT_CONNECTOR_BPC_6 , +IGT_CONNECTOR_BPC_8 , +IGT_CONNECTOR_BPC_10 + };I think you can keep these out of main and have them defined as static.
[Bhanu] No other function is directly accessing these structs, I think it can be ok to keep inside the main().
Quoted 2 lines
Also, please test this out on real monitors and check the behavior.
[Bhanu] I'll run the CI on this patch along with kernel patches (IGT+kernel), Meanwhile, can you please review the kernel patches as well?
https://patchwork.freedesktop.org/series/79664/
Quoted 36 lines
tests/meson.build index
Quoted 35 lines
tests/kms_dither.c new file +14
-0+int i, j; +data_t data = {0 }; + + igt_fixture { + data.drm_fd =drm_open_driver_master (DRIVER_INTEL ); +kmstest_set_vt_graphics_mode (); + +igt_display_require (&data.display, data.drm_fd); +igt_display_require_output (&data.display); + } + +for (i =0 ; i <ARRAY_SIZE (fb_formats); i++) { +for (j =0 ; j <ARRAY_SIZE (output_bpc); j++) { + igt_describe_f("Framebuffer BPC:%d, Panel BPC:%d,Expected Dither:%s\n",
tests/kms_dither.c new file +2
-0+ fb_formats[i].bpc, output_bpc[j], + (fb_formats[i].bpc > output_bpc[j]) ?"Enable": "Disable");
tests/kms_dither.c new file +2
-0+ + igt_subtest_with_dynamic_f("FB-%dBPC-Vs-Panel-%dBPC", fb_formats[i].bpc, output_bpc[j])
tests/kms_dither.c new file +12
-0+run_dither_test (&data, + fb_formats[i].bpc, + fb_formats[i].format, + output_bpc[j], +TEST_NONE ); + } + } + + igt_fixture { +igt_display_fini (&data.display); + } +}tests/meson.build index renamed from tests/meson.build +0
-0
cfe508c4..05a9cfb8
Quoted 14 lines
Quoted 12 lines
100644
tests/meson.build +1
-1@@ -27,6 +27,7 @@ test_progs = [ 'kms_cursor_crc', 'kms_cursor_edge_walk', 'kms_cursor_legacy', + 'kms_dither', 'kms_dp_aux_dev', 'kms_dp_dsc', 'kms_dp_tiled_display', --Quoted 1 line
2.20.1
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 1/1 tests/kms_dither: New IGT to validate crtc Dithering
In reply to Bhanuprakash ModemMany of the display devices have color format support less than the color format of the input data (Ex: 8-bit input data and 6-bit display color depth). Then the input data will be either truncated or rounded, but this approach usually causes loss of detail and also produce large banded areas of a single color that significantly differs from the original image.
Dithering is a technique used to enhance these colors by creating the illusion of smoothness by adjusting the nearby pixel color. For Eg: Converting 8-bit to 6-bit by modifying the pixel information.
Dithering should be enabled when a panel color depth is lower than the color depth of the framebuffer.
Even though feature Dithering is there since legacy, there is no specific IGT for this. This patch will create New IGT for Dithering. And below is the truth table for CRTC Dithering.
|----------------|---------|-------------| | Frame buffer | Panel | Dithering | |----------------|---------|-------------| | 8 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 8 BPC | 8 BPC | No | |----------------|---------|-------------| | 8 BPC | 10 BPC | No | |----------------|---------|-------------| | 10 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 10 BPC | No | |----------------|---------|-------------| | 16 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 10 BPC | Yes | |----------------|---------|-------------|
v2:
* Fix commit message (Karthik)
* Add file author (Karthik)
* Dynamic subtests for pipe-output combinations (Karthik)
* Update deprecated pipe name (Karthik)
* Remove redundant fb creation logic (Karthik)
v3:
* Use for_each_pipe_with_valid_output() to simplify the logic (Bhanu)
* Remove magic numbers to create fb (Karthik)
* Fix typos & comments (Swati)
v4:
* Remove explicit igt_require for a valid output found, igt_subtest_with_dynamic will handle the SKIP (Petri)
* Limit the execution to a single pipe (Uma)
--- tests/Makefile.sources | 1 + tests/kms_dither.c | 249 +++++++++++++++++++++++++++++++++++++++++ tests/meson.build | 1 + 3 files changed, 251 insertions(+) create mode 100644 tests/kms_dither.c
tests/Makefile.sources +1 -0
@@ -44,6 +44,7 @@ TESTS_progs = \ kms_cursor_crc \ kms_cursor_edge_walk \ kms_cursor_legacy \ + kms_dither \ kms_dp_aux_dev \ kms_dp_dsc \ kms_dp_tiled_display \
tests/kms_dither.c new file +249 -0
249 lines not on this page · raw message
tests/meson.build +1 -0
@@ -28,6 +28,7 @@ test_progs = [ 'kms_cursor_crc', 'kms_cursor_edge_walk', 'kms_cursor_legacy', + 'kms_dither', 'kms_dp_aux_dev', 'kms_dp_dsc', 'kms_dp_tiled_display',
Signature · 6 lines
2.20.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 1/1 tests/kms_dither: New IGT to validate crtc Dithering
Many of the display devices have color format support less than the color format of the input data (Ex: 8-bit input data and 6-bit display color depth). Then the input data will be either truncated or rounded, but this approach usually causes loss of detail and also produce large banded areas of a single color that significantly differs from the original image.
Dithering is a technique used to enhance these colors by creating the illusion of smoothness by adjusting the nearby pixel color. For Eg: Converting 8-bit to 6-bit by modifying the pixel information.
Dithering should be enabled when a panel color depth is lower than the color depth of the framebuffer.
Even though feature Dithering is there since legacy, there is no specific IGT for this. This patch will create New IGT for Dithering. And below is the truth table for CRTC Dithering.
|----------------|---------|-------------| | Frame buffer | Panel | Dithering | |----------------|---------|-------------| | 8 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 8 BPC | 8 BPC | No | |----------------|---------|-------------| | 8 BPC | 10 BPC | No | |----------------|---------|-------------| | 10 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 10 BPC | 10 BPC | No | |----------------|---------|-------------| | 16 BPC | 6 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 8 BPC | Yes | |----------------|---------|-------------| | 16 BPC | 10 BPC | Yes | |----------------|---------|-------------|
v2:
* Fix commit message (Karthik)
* Add file author (Karthik)
* Dynamic subtests for pipe-output combinations (Karthik)
* Update deprecated pipe name (Karthik)
* Remove redundant fb creation logic (Karthik)
v3:
* Use for_each_pipe_with_valid_output() to simplify the logic (Bhanu)
* Remove magic numbers to create fb (Karthik)
* Fix typos & comments (Swati)
v4:
* Remove explicit igt_require for a valid output found, igt_subtest_with_dynamic will handle the SKIP (Petri)
* Limit the execution to a single pipe (Uma)
v5:
* SKIP subtest for HDMI with 6 BPC (Bhanu)
* Fix the usage of valid format to create 8 BPC Framebuffer (Bhanu)
* Add support for suspend/resume tests (Bhanu)
* Add few debug prints (Bhanu)
--- tests/Makefile.sources | 1 + tests/kms_dither.c | 273 +++++++++++++++++++++++++++++++++++++++++ tests/meson.build | 1 + 3 files changed, 275 insertions(+) create mode 100644 tests/kms_dither.c
tests/Makefile.sources +1 -0
@@ -44,6 +44,7 @@ TESTS_progs = \ kms_cursor_crc \ kms_cursor_edge_walk \ kms_cursor_legacy \ + kms_dither \ kms_dp_aux_dev \ kms_dp_dsc \ kms_dp_tiled_display \
tests/kms_dither.c new file +273 -0
273 lines not on this page · raw message
tests/meson.build +1 -0
@@ -28,6 +28,7 @@ test_progs = [ 'kms_cursor_crc', 'kms_cursor_edge_walk', 'kms_cursor_legacy', + 'kms_dither', 'kms_dp_aux_dev', 'kms_dp_dsc', 'kms_dp_tiled_display',
Signature · 6 lines
2.20.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for Add new IGT test to validate crtc Dithering (rev2)
In reply to Bhanuprakash Modem== Series Details ==
== Series Details ==
Series: Add new IGT test to validate crtc Dithering (rev2)
URL : https://patchwork.freedesktop.org/series/79661/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_8771 -> IGTPW_4786
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/index.html
Known issues
------------
Here are the changes found in IGTPW_4786 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@i915_pm_rpm@basic-pci-d3-state:
- fi-bsw-kefka: [PASS][1] -> [DMESG-WARN][2] ([i915#1982])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/fi-bsw-kefka/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/fi-bsw-kefka/igt@[email protected]
* igt@i915_selftest@live@gt_lrc:
- fi-tgl-u2: [PASS][3] -> [DMESG-FAIL][4] ([i915#1233])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/fi-tgl-u2/igt@i915_selftest@live@gt_lrc.html
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/fi-tgl-u2/igt@i915_selftest@live@gt_lrc.html
* igt@kms_busy@basic@flip:
- fi-kbl-x1275: [PASS][5] -> [DMESG-WARN][6] ([i915#62] / [i915#92] / [i915#95])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/fi-kbl-x1275/igt@kms_busy@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/fi-kbl-x1275/igt@kms_busy@[email protected]
* igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic:
- fi-bsw-n3050: [PASS][7] -> [DMESG-WARN][8] ([i915#1982]) +1 similar issue
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/fi-bsw-n3050/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/fi-bsw-n3050/igt@[email protected]
* igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy:
- fi-icl-u2: [PASS][9] -> [DMESG-WARN][10] ([i915#1982]) +1 similar issue
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/fi-icl-u2/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/fi-icl-u2/igt@[email protected]
* igt@vgem_basic@dmabuf-export:
- fi-tgl-y: [PASS][11] -> [DMESG-WARN][12] ([i915#402])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/fi-tgl-y/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/fi-tgl-y/igt@[email protected]
#### Possible fixes ####
* igt@gem_exec_suspend@basic-s0:
- fi-tgl-u2: [FAIL][13] ([i915#1888]) -> [PASS][14]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/fi-tgl-u2/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/fi-tgl-u2/igt@[email protected]
* igt@i915_pm_rpm@basic-pci-d3-state:
- {fi-tgl-dsi}: [DMESG-WARN][15] ([i915#1982]) -> [PASS][16]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/fi-tgl-dsi/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/fi-tgl-dsi/igt@[email protected]
* igt@kms_busy@basic@flip:
- fi-tgl-y: [DMESG-WARN][17] ([i915#1982]) -> [PASS][18]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/fi-tgl-y/igt@kms_busy@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/fi-tgl-y/igt@kms_busy@[email protected]
* igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic:
- fi-byt-j1900: [DMESG-WARN][19] ([i915#1982]) -> [PASS][20]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/fi-byt-j1900/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/fi-byt-j1900/igt@[email protected]
* igt@kms_flip@basic-flip-vs-wf_vblank@c-edp1:
- fi-icl-u2: [DMESG-WARN][21] ([i915#1982]) -> [PASS][22]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/fi-icl-u2/igt@kms_flip@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/fi-icl-u2/igt@kms_flip@[email protected]
* igt@vgem_basic@debugfs:
- fi-tgl-y: [DMESG-WARN][23] ([i915#402]) -> [PASS][24]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/fi-tgl-y/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/fi-tgl-y/igt@[email protected]
#### Warnings ####
* igt@gem_exec_suspend@basic-s3:
- fi-kbl-x1275: [DMESG-WARN][25] ([i915#62] / [i915#92] / [i915#95]) -> [DMESG-WARN][26] ([i915#62] / [i915#92]) +1 similar issue
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/fi-kbl-x1275/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/fi-kbl-x1275/igt@[email protected]
* igt@i915_pm_rpm@module-reload:
- fi-kbl-x1275: [SKIP][27] ([fdo#109271]) -> [DMESG-FAIL][28] ([i915#62])
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/fi-kbl-x1275/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/fi-kbl-x1275/igt@[email protected]
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
- fi-kbl-x1275: [DMESG-WARN][29] ([i915#62] / [i915#92]) -> [DMESG-WARN][30] ([i915#62] / [i915#92] / [i915#95])
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/fi-kbl-x1275/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/fi-kbl-x1275/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[i915#1233]: https://gitlab.freedesktop.org/drm/intel/issues/1233
[i915#1888]: https://gitlab.freedesktop.org/drm/intel/issues/1888
[i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
[i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402
[i915#62]: https://gitlab.freedesktop.org/drm/intel/issues/62
[i915#92]: https://gitlab.freedesktop.org/drm/intel/issues/92
[i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
Participating hosts (46 -> 40)
------------------------------
Missing (6): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_5742 -> IGTPW_4786
CI-20190529: 20190529
CI_DRM_8771: 03db6c5382b72d68bbb20e253f24acf199de15f2 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_4786: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/index.html
IGT_5742: 540f9de91ab2816885a9076a4c0835cb3dc67a97 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Testlist changes ==
+igt@kms_dither@fb-8bpc-vs-panel-6bpc
+igt@kms_dither@fb-8bpc-vs-panel-8bpc
+igt@kms_dither@fb-8bpc-vs-panel-10bpc
+igt@kms_dither@fb-10bpc-vs-panel-6bpc
+igt@kms_dither@fb-10bpc-vs-panel-8bpc
+igt@kms_dither@fb-10bpc-vs-panel-10bpc
+igt@kms_dither@fb-16bpc-vs-panel-6bpc
+igt@kms_dither@fb-16bpc-vs-panel-8bpc
+igt@kms_dither@fb-16bpc-vs-panel-10bpc
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.IGT: success for Add new IGT test to validate crtc Dithering (rev2)
In reply to Bhanuprakash Modem== Series Details ==
== Series Details ==
Series: Add new IGT test to validate crtc Dithering (rev2)
URL : https://patchwork.freedesktop.org/series/79661/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_8771_full -> IGTPW_4786_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/index.html
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_4786_full:
### IGT changes ###
#### Possible regressions ####
* {igt@kms_dither@fb-8bpc-vs-panel-6bpc} (NEW):
- shard-iclb: NOTRUN -> [SKIP][1] +8 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-iclb2/igt@[email protected]
* {igt@kms_dither@fb-8bpc-vs-panel-8bpc} (NEW):
- shard-tglb: NOTRUN -> [SKIP][2] +8 similar issues
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-tglb2/igt@[email protected]
New tests
---------
New tests have been introduced between CI_DRM_8771_full and IGTPW_4786_full:
### New IGT tests (9) ###
* igt@kms_dither@fb-10bpc-vs-panel-10bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-10bpc-vs-panel-6bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-10bpc-vs-panel-8bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-16bpc-vs-panel-10bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-16bpc-vs-panel-6bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0] s
* igt@kms_dither@fb-16bpc-vs-panel-8bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-8bpc-vs-panel-10bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-8bpc-vs-panel-6bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0] s
* igt@kms_dither@fb-8bpc-vs-panel-8bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0] s
Known issues
------------
Here are the changes found in IGTPW_4786_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_create@madvise:
- shard-glk: [PASS][3] -> [DMESG-WARN][4] ([i915#118] / [i915#95])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-glk6/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-glk9/igt@[email protected]
* igt@gem_exec_reloc@basic-concurrent0:
- shard-glk: [PASS][5] -> [FAIL][6] ([i915#1930])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-glk2/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-glk2/igt@[email protected]
* igt@gen9_exec_parse@allowed-all:
- shard-apl: [PASS][7] -> [DMESG-WARN][8] ([i915#1436] / [i915#1635] / [i915#716])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-apl3/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-apl7/igt@[email protected]
* igt@i915_selftest@perf@request:
- shard-tglb: [PASS][9] -> [INCOMPLETE][10] ([i915#1823])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-tglb1/igt@i915_selftest@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-tglb8/igt@i915_selftest@[email protected]
* igt@kms_big_fb@y-tiled-64bpp-rotate-0:
- shard-glk: [PASS][11] -> [DMESG-FAIL][12] ([i915#118] / [i915#95])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-glk1/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-glk8/igt@[email protected]
* igt@kms_cursor_legacy@cursor-vs-flip-atomic:
- shard-hsw: [PASS][13] -> [TIMEOUT][14] ([i915#1958] / [i915#2119]) +2 similar issues
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-hsw1/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-hsw6/igt@[email protected]
* igt@kms_cursor_legacy@cursor-vs-flip-atomic-transitions-varying-size:
- shard-hsw: [PASS][15] -> [FAIL][16] ([i915#57])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-hsw1/igt@kms_cursor_legacy@cursor-vs-flip-atomic-transitions-varying-size.html
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-hsw6/igt@kms_cursor_legacy@cursor-vs-flip-atomic-transitions-varying-size.html
* igt@kms_flip@2x-plain-flip@ab-vga1-hdmi-a1:
- shard-hsw: [PASS][17] -> [DMESG-WARN][18] ([i915#1982])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-hsw4/igt@kms_flip@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-hsw6/igt@kms_flip@[email protected]
* igt@kms_flip@flip-vs-suspend-interruptible@a-dp1:
- shard-kbl: [PASS][19] -> [DMESG-WARN][20] ([i915#180]) +8 similar issues
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-kbl6/igt@kms_flip@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-kbl1/igt@kms_flip@[email protected]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-indfb-draw-render:
- shard-kbl: [PASS][21] -> [DMESG-WARN][22] ([i915#1982]) +1 similar issue
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-kbl2/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-indfb-draw-render.html
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-kbl4/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-indfb-draw-render.html
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-shrfb-draw-blt:
- shard-tglb: [PASS][23] -> [DMESG-WARN][24] ([i915#1982])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-tglb5/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-tglb3/igt@[email protected]
* igt@kms_psr@psr2_basic:
- shard-iclb: [PASS][25] -> [SKIP][26] ([fdo#109441]) +2 similar issues
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-iclb2/igt@kms_psr@psr2_basic.html
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-iclb1/igt@kms_psr@psr2_basic.html
* igt@kms_vblank@pipe-c-wait-forked:
- shard-tglb: [PASS][27] -> [DMESG-WARN][28] ([i915#402])
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-tglb2/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-tglb5/igt@[email protected]
* igt@syncobj_basic@create-signaled:
- shard-snb: [PASS][29] -> [TIMEOUT][30] ([i915#1958] / [i915#2119]) +2 similar issues
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-snb4/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-snb2/igt@[email protected]
#### Possible fixes ####
* igt@gem_exec_parallel@fds@rcs0:
- shard-iclb: [INCOMPLETE][31] ([i915#2191]) -> [PASS][32]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-iclb8/igt@gem_exec_parallel@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-iclb5/igt@gem_exec_parallel@[email protected]
* igt@gem_exec_whisper@basic-fds:
- shard-glk: [DMESG-WARN][33] ([i915#118] / [i915#95]) -> [PASS][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-glk4/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-glk8/igt@[email protected]
* {igt@gem_huc_copy@huc-copy}:
- shard-tglb: [SKIP][35] ([i915#2190]) -> [PASS][36]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-tglb6/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-tglb3/igt@[email protected]
* igt@i915_module_load@reload:
- shard-tglb: [DMESG-WARN][37] ([i915#402]) -> [PASS][38] +2 similar issues
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-tglb8/igt@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-tglb3/igt@[email protected]
* igt@kms_cursor_crc@pipe-a-cursor-64x64-sliding:
- shard-snb: [SKIP][39] ([fdo#109271]) -> [PASS][40] +1 similar issue
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-snb2/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-snb6/igt@[email protected]
* igt@kms_cursor_crc@pipe-c-cursor-64x21-random:
- shard-kbl: [FAIL][41] ([i915#54]) -> [PASS][42]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-kbl7/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-kbl7/igt@[email protected]
- shard-apl: [FAIL][43] ([i915#1635] / [i915#54]) -> [PASS][44]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-apl8/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-apl6/igt@[email protected]
* igt@kms_cursor_legacy@2x-flip-vs-cursor-legacy:
- shard-glk: [FAIL][45] ([i915#72]) -> [PASS][46]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-glk8/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-glk9/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-shrfb-draw-render:
- shard-tglb: [DMESG-WARN][47] ([i915#1982]) -> [PASS][48] +4 similar issues
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-tglb2/igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-shrfb-draw-render.html
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-tglb2/igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-shrfb-draw-render.html
* igt@kms_frontbuffer_tracking@fbc-badstride:
- shard-glk: [DMESG-WARN][49] ([i915#1982]) -> [PASS][50]
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-glk1/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-glk5/igt@[email protected]
* igt@kms_psr@psr2_cursor_plane_onoff:
- shard-tglb: [SKIP][51] ([i915#668]) -> [PASS][52]
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-tglb8/igt@kms_psr@psr2_cursor_plane_onoff.html
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-tglb8/igt@kms_psr@psr2_cursor_plane_onoff.html
- shard-iclb: [SKIP][53] ([fdo#109441]) -> [PASS][54]
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-iclb1/igt@kms_psr@psr2_cursor_plane_onoff.html
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-iclb2/igt@kms_psr@psr2_cursor_plane_onoff.html
* igt@kms_universal_plane@universal-plane-pipe-b-functional:
- shard-apl: [FAIL][55] ([i915#1635] / [i915#331]) -> [PASS][56]
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-apl3/igt@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-apl1/igt@[email protected]
- shard-kbl: [FAIL][57] ([i915#331]) -> [PASS][58]
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-kbl7/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-kbl7/igt@[email protected]
* igt@kms_vblank@pipe-a-ts-continuation-suspend:
- shard-kbl: [DMESG-WARN][59] ([i915#180]) -> [PASS][60] +2 similar issues
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-kbl4/igt@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-kbl4/igt@[email protected]
* igt@perf_pmu@semaphore-busy@rcs0:
- shard-kbl: [FAIL][61] ([i915#1820]) -> [PASS][62]
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-kbl1/igt@perf_pmu@[email protected]
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-kbl2/igt@perf_pmu@[email protected]
* igt@prime_mmap@test_correct:
- shard-snb: [TIMEOUT][63] ([i915#1958] / [i915#2119]) -> [PASS][64]
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-snb1/igt@prime_mmap@test_correct.html
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-snb4/igt@prime_mmap@test_correct.html
- shard-hsw: [TIMEOUT][65] ([i915#1958] / [i915#2119]) -> [PASS][66]
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-hsw6/igt@prime_mmap@test_correct.html
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-hsw6/igt@prime_mmap@test_correct.html
* igt@sysfs_timeslice_duration@timeout@vecs0:
- shard-apl: [FAIL][67] ([i915#1635] / [i915#1755]) -> [PASS][68]
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-apl4/igt@sysfs_timeslice_duration@[email protected]
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-apl3/igt@sysfs_timeslice_duration@[email protected]
#### Warnings ####
* igt@gem_exec_reloc@basic-spin-others@vcs0:
- shard-snb: [WARN][69] ([i915#2021]) -> [WARN][70] ([i915#2036])
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-snb5/igt@gem_exec_reloc@[email protected]
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-snb1/igt@gem_exec_reloc@[email protected]
* igt@kms_content_protection@srm:
- shard-kbl: [TIMEOUT][71] ([i915#1319] / [i915#1958] / [i915#2119]) -> [TIMEOUT][72] ([i915#1319] / [i915#2119]) +1 similar issue
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-kbl6/igt@[email protected]
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-kbl7/igt@[email protected]
* igt@kms_cursor_crc@pipe-b-cursor-suspend:
- shard-kbl: [INCOMPLETE][73] ([i915#155]) -> [DMESG-WARN][74] ([i915#180])
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-kbl4/igt@[email protected]
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-kbl4/igt@[email protected]
* igt@kms_cursor_edge_walk@pipe-d-128x128-top-edge:
- shard-snb: [TIMEOUT][75] ([i915#1958] / [i915#2119]) -> [SKIP][76] ([fdo#109271]) +2 similar issues
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-snb1/igt@[email protected]
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-snb1/igt@[email protected]
* igt@kms_dp_dsc@basic-dsc-enable-edp:
- shard-snb: [SKIP][77] ([fdo#109271]) -> [TIMEOUT][78] ([i915#1958] / [i915#2119]) +2 similar issues
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-snb5/igt@[email protected]
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-snb2/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-spr-indfb-move:
- shard-hsw: [TIMEOUT][79] ([i915#1958] / [i915#2119]) -> [SKIP][80] ([fdo#109271]) +1 similar issue
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-hsw6/igt@[email protected]
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-hsw4/igt@[email protected]
* igt@kms_vblank@pipe-d-ts-continuation-modeset:
- shard-hsw: [SKIP][81] ([fdo#109271]) -> [TIMEOUT][82] ([i915#1958] / [i915#2119]) +1 similar issue
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8771/shard-hsw4/igt@[email protected]
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/shard-hsw6/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[i915#118]: https://gitlab.freedesktop.org/drm/intel/issues/118
[i915#1319]: https://gitlab.freedesktop.org/drm/intel/issues/1319
[i915#1436]: https://gitlab.freedesktop.org/drm/intel/issues/1436
[i915#155]: https://gitlab.freedesktop.org/drm/intel/issues/155
[i915#1635]: https://gitlab.freedesktop.org/drm/intel/issues/1635
[i915#1755]: https://gitlab.freedesktop.org/drm/intel/issues/1755
[i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
[i915#1820]: https://gitlab.freedesktop.org/drm/intel/issues/1820
[i915#1823]: https://gitlab.freedesktop.org/drm/intel/issues/1823
[i915#1930]: https://gitlab.freedesktop.org/drm/intel/issues/1930
[i915#1958]: https://gitlab.freedesktop.org/drm/intel/issues/1958
[i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
[i915#2021]: https://gitlab.freedesktop.org/drm/intel/issues/2021
[i915#2036]: https://gitlab.freedesktop.org/drm/intel/issues/2036
[i915#2119]: https://gitlab.freedesktop.org/drm/intel/issues/2119
[i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
[i915#2191]: https://gitlab.freedesktop.org/drm/intel/issues/2191
[i915#331]: https://gitlab.freedesktop.org/drm/intel/issues/331
[i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402
[i915#54]: https://gitlab.freedesktop.org/drm/intel/issues/54
[i915#57]: https://gitlab.freedesktop.org/drm/intel/issues/57
[i915#668]: https://gitlab.freedesktop.org/drm/intel/issues/668
[i915#716]: https://gitlab.freedesktop.org/drm/intel/issues/716
[i915#72]: https://gitlab.freedesktop.org/drm/intel/issues/72
[i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
Participating hosts (10 -> 8)
------------------------------
Missing (2): pig-skl-6260u pig-glk-j5005
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_5742 -> IGTPW_4786
* Piglit: piglit_4509 -> None
CI-20190529: 20190529
CI_DRM_8771: 03db6c5382b72d68bbb20e253f24acf199de15f2 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_4786: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/index.html
IGT_5742: 540f9de91ab2816885a9076a4c0835cb3dc67a97 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4786/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ GitLab.Pipeline: warning for Add new IGT test to validate crtc Dithering (rev3)
In reply to Bhanuprakash Modem== Series Details ==
== Series Details ==
Series: Add new IGT test to validate crtc Dithering (rev3)
URL : https://patchwork.freedesktop.org/series/79661/
State : warning
== Summary ==
Did not get list of undocumented tests for this run, something is wrong!
Other than that, pipeline status: FAILED.
see https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/pipelines/181216 for the overview.
build:tests-fedora has failed (https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/jobs/3770125):
Using Docker executor with image registry.freedesktop.org/gfx-ci/igt-ci-tags/build-fedora:commit-7c27fc9636dd5a6db464749cc9f32627b36d6a35 ...
Authenticating with credentials from job payload (GitLab Registry)
Pulling docker image registry.freedesktop.org/gfx-ci/igt-ci-tags/build-fedora:commit-7c27fc9636dd5a6db464749cc9f32627b36d6a35 ...
Using docker image sha256:4b3054d89ef79f9be95501786fbbbe22857d02c867fff99693808cd80909939f for registry.freedesktop.org/gfx-ci/igt-ci-tags/build-fedora:commit-7c27fc9636dd5a6db464749cc9f32627b36d6a35 ... section_end:1595517314:prepare_executor
section_start:1595517314:prepare_script
Preparing environment
Running on runner-z2cifdyy-project-3185-concurrent-0 via gst-htz-3...
section_end:1595517314:prepare_script
section_start:1595517314:get_sources
Getting source from Git repository
$ eval "$CI_PRE_CLONE_SCRIPT" Fetching changes... Initialized empty Git repository in /builds/gfx-ci/igt-ci-tags/.git/ Created fresh repository. error: RPC failed; curl 92 HTTP/2 stream 0 was not closed cleanly: Unknown error code (err 1) fatal: the remote end hung up unexpectedly section_end:1595517379:get_sources ERROR: Job failed: exit code 1
build:tests-fedora-oldest-meson has failed (https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/jobs/3770127):
Using Docker executor with image registry.freedesktop.org/gfx-ci/igt-ci-tags/build-fedora:commit-7c27fc9636dd5a6db464749cc9f32627b36d6a35 ...
Authenticating with credentials from job payload (GitLab Registry)
Pulling docker image registry.freedesktop.org/gfx-ci/igt-ci-tags/build-fedora:commit-7c27fc9636dd5a6db464749cc9f32627b36d6a35 ...
Using docker image sha256:4b3054d89ef79f9be95501786fbbbe22857d02c867fff99693808cd80909939f for registry.freedesktop.org/gfx-ci/igt-ci-tags/build-fedora:commit-7c27fc9636dd5a6db464749cc9f32627b36d6a35 ... section_end:1595517338:prepare_executor
section_start:1595517338:prepare_script
Preparing environment
Running on runner-z2cifdyy-project-3185-concurrent-1 via gst-htz-3...
section_end:1595517340:prepare_script
section_start:1595517340:get_sources
Getting source from Git repository
$ eval "$CI_PRE_CLONE_SCRIPT" Fetching changes... Initialized empty Git repository in /builds/gfx-ci/igt-ci-tags/.git/ Created fresh repository. error: RPC failed; curl 92 HTTP/2 stream 0 was not closed cleanly: Unknown error code (err 1) fatal: the remote end hung up unexpectedly section_end:1595517402:get_sources ERROR: Job failed: exit code 1
== Logs ==
For more details see: https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/pipelines/181216
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ Fi.CI.BAT: failure for Add new IGT test to validate crtc Dithering (rev3)
In reply to Bhanuprakash Modem== Series Details ==
== Series Details ==
Series: Add new IGT test to validate crtc Dithering (rev3)
URL : https://patchwork.freedesktop.org/series/79661/
State : failure
== Summary ==
CI Bug Log - changes from IGT_5746 -> IGTPW_4793
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with IGTPW_4793 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in IGTPW_4793, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/index.html
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_4793:
### IGT changes ###
#### Possible regressions ####
* igt@i915_selftest@live@execlists:
- fi-cml-s: [PASS][1] -> [INCOMPLETE][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-cml-s/igt@i915_selftest@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-cml-s/igt@i915_selftest@[email protected]
Known issues
------------
Here are the changes found in IGTPW_4793 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_suspend@basic-s3:
- fi-tgl-u2: [PASS][3] -> [FAIL][4] ([i915#1888])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-tgl-u2/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-tgl-u2/igt@[email protected]
* igt@gem_flink_basic@flink-lifetime:
- fi-tgl-y: [PASS][5] -> [DMESG-WARN][6] ([i915#402]) +1 similar issue
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-tgl-y/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-tgl-y/igt@[email protected]
* igt@i915_module_load@reload:
- fi-bxt-dsi: [PASS][7] -> [DMESG-WARN][8] ([i915#1635] / [i915#1982])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-bxt-dsi/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-bxt-dsi/igt@[email protected]
* igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy:
- fi-icl-u2: [PASS][9] -> [DMESG-WARN][10] ([i915#1982]) +1 similar issue
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-icl-u2/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-icl-u2/igt@[email protected]
#### Possible fixes ####
* igt@i915_pm_rpm@module-reload:
- fi-bsw-kefka: [DMESG-WARN][11] ([i915#1982]) -> [PASS][12]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-bsw-kefka/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-bsw-kefka/igt@[email protected]
- fi-bsw-n3050: [DMESG-WARN][13] ([i915#1982]) -> [PASS][14]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-bsw-n3050/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-bsw-n3050/igt@[email protected]
* igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic:
- {fi-kbl-7560u}: [DMESG-WARN][15] ([i915#1982]) -> [PASS][16]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-kbl-7560u/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-kbl-7560u/igt@[email protected]
* igt@kms_flip@basic-flip-vs-dpms@b-hdmi-a1:
- fi-cml-s: [DMESG-WARN][17] ([i915#1982]) -> [PASS][18]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-cml-s/igt@kms_flip@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-cml-s/igt@kms_flip@[email protected]
* igt@kms_flip@basic-flip-vs-wf_vblank@c-edp1:
- fi-icl-u2: [DMESG-WARN][19] ([i915#1982]) -> [PASS][20]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-icl-u2/igt@kms_flip@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-icl-u2/igt@kms_flip@[email protected]
* igt@kms_flip@basic-flip-vs-wf_vblank@c-hdmi-a2:
- fi-skl-guc: [DMESG-WARN][21] ([i915#2203]) -> [PASS][22]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-skl-guc/igt@kms_flip@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-skl-guc/igt@kms_flip@[email protected]
* igt@prime_self_import@basic-with_two_bos:
- fi-tgl-y: [DMESG-WARN][23] ([i915#402]) -> [PASS][24] +1 similar issue
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-tgl-y/igt@prime_self_import@basic-with_two_bos.html
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-tgl-y/igt@prime_self_import@basic-with_two_bos.html
#### Warnings ####
* igt@gem_exec_suspend@basic-s0:
- fi-kbl-x1275: [DMESG-WARN][25] ([i915#1982] / [i915#62] / [i915#92] / [i915#95]) -> [DMESG-WARN][26] ([i915#62] / [i915#92] / [i915#95])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-kbl-x1275/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-kbl-x1275/igt@[email protected]
* igt@i915_pm_rpm@basic-pci-d3-state:
- fi-kbl-x1275: [DMESG-WARN][27] ([i915#62] / [i915#92] / [i915#95]) -> [DMESG-WARN][28] ([i915#62] / [i915#92]) +1 similar issue
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-kbl-x1275/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-kbl-x1275/igt@[email protected]
* igt@kms_cursor_legacy@basic-flip-after-cursor-legacy:
- fi-kbl-x1275: [DMESG-WARN][29] ([i915#62] / [i915#92]) -> [DMESG-WARN][30] ([i915#62] / [i915#92] / [i915#95]) +8 similar issues
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-kbl-x1275/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-kbl-x1275/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[i915#1635]: https://gitlab.freedesktop.org/drm/intel/issues/1635
[i915#1888]: https://gitlab.freedesktop.org/drm/intel/issues/1888
[i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
[i915#2203]: https://gitlab.freedesktop.org/drm/intel/issues/2203
[i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402
[i915#62]: https://gitlab.freedesktop.org/drm/intel/issues/62
[i915#92]: https://gitlab.freedesktop.org/drm/intel/issues/92
[i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
Participating hosts (47 -> 40)
------------------------------
Missing (7): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper fi-bdw-samus
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_5746 -> IGTPW_4793
CI-20190529: 20190529
CI_DRM_8778: 5ead5989a42079951e6f0b7b6a072a690df0b985 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_4793: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/index.html
IGT_5746: d818f0c54e5e781ba3fb372aab8f270cf153776c @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Testlist changes ==
+igt@kms_dither@fb-8bpc-vs-panel-6bpc
+igt@kms_dither@fb-8bpc-vs-panel-8bpc
+igt@kms_dither@fb-8bpc-vs-panel-10bpc
+igt@kms_dither@fb-10bpc-vs-panel-6bpc
+igt@kms_dither@fb-10bpc-vs-panel-8bpc
+igt@kms_dither@fb-10bpc-vs-panel-10bpc
+igt@kms_dither@fb-16bpc-vs-panel-6bpc
+igt@kms_dither@fb-16bpc-vs-panel-8bpc
+igt@kms_dither@fb-16bpc-vs-panel-10bpc
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] ✗ Fi.CI.BAT: failure for Add new IGT test to validate crtc Dithering (rev3)
Quoted 30 lines · Patchwork
== Series Details ==
Series: Add new IGT test to validate crtc Dithering (rev3)
URL : https://patchwork.freedesktop.org/series/79661/
State : failure== Summary ==
CI Bug Log - changes from
IGT_5746->IGTPW_4793
====================================================Summary
-------**FAILURE**
Serious unknown changes coming with
IGTPW_4793absolutely need to be verified manually.If you think the reported changes have nothing to do with the changes introduced in
IGTPW_4793, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/index.html
Possible new issues
-------------------Here are the unknown changes that may have been introduced in
IGTPW_4793:
Quoted 9 lines
### IGT changes ###
#### Possible regressions ####
* igt@i915_selftest@live@execlists:
- fi-cml-s: [PASS][1] -> [INCOMPLETE][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-cml-s/igt@i915_selftest@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-cml-s/igt@i915_selftest@[email protected]
Lakshmi, false positive here.
Signature · 5 lines
Petri Latvala _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] ✗ Fi.CI.BAT: failure for Add new IGT test to validate crtc Dithering (rev3)
Re-reported.
-----Original Message-----
From: Latvala, Petri <[email protected]>
Sent: Friday, July 24, 2020 2:01 AM
To: [email protected]; Vudum, Lakshminarayana <[email protected]>
Cc: Modem, Bhanuprakash <[email protected]>
Subject: Re: [igt-dev] ✗ Fi.CI.BAT: failure for Add new IGT test to validate crtc Dithering (rev3)
Quoted 33 lines · Patchwork
== Series Details ==
Series: Add new IGT test to validate crtc Dithering (rev3)
URL : https://patchwork.freedesktop.org/series/79661/
State : failure== Summary ==
CI Bug Log - changes from
IGT_5746->IGTPW_4793
====================================================Summary
-------**FAILURE**
Serious unknown changes coming with
IGTPW_4793absolutely need to be verified manually.If you think the reported changes have nothing to do with the changes introduced in
IGTPW_4793, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.External URL:
https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/index.htmlPossible new issues
-------------------Here are the unknown changes that may have been introduced in
IGTPW_4793:### IGT changes ###
Quoted 9 lines
#### Possible regressions ####
* igt@i915_selftest@live@execlists:
- fi-cml-s: [PASS][1] -> [INCOMPLETE][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-cml-s/igt@i915_selftest@[email protected]
[2]:
https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-cml-s/igt@i915_
selftest@[email protected]
Lakshmi, false positive here.
--
Petri Latvala
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for Add new IGT test to validate crtc Dithering (rev3)
In reply to Bhanuprakash Modem== Series Details ==
== Series Details ==
Series: Add new IGT test to validate crtc Dithering (rev3)
URL : https://patchwork.freedesktop.org/series/79661/
State : success
== Summary ==
CI Bug Log - changes from IGT_5746 -> IGTPW_4793
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/index.html
Known issues
------------
Here are the changes found in IGTPW_4793 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_suspend@basic-s3:
- fi-tgl-u2: [PASS][1] -> [FAIL][2] ([i915#1888])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-tgl-u2/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-tgl-u2/igt@[email protected]
* igt@gem_flink_basic@flink-lifetime:
- fi-tgl-y: [PASS][3] -> [DMESG-WARN][4] ([i915#402]) +1 similar issue
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-tgl-y/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-tgl-y/igt@[email protected]
* igt@i915_module_load@reload:
- fi-bxt-dsi: [PASS][5] -> [DMESG-WARN][6] ([i915#1635] / [i915#1982])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-bxt-dsi/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-bxt-dsi/igt@[email protected]
* igt@i915_selftest@live@execlists:
- fi-cml-s: [PASS][7] -> [INCOMPLETE][8] ([i915#2120])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-cml-s/igt@i915_selftest@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-cml-s/igt@i915_selftest@[email protected]
* igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy:
- fi-icl-u2: [PASS][9] -> [DMESG-WARN][10] ([i915#1982]) +1 similar issue
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-icl-u2/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-icl-u2/igt@[email protected]
#### Possible fixes ####
* igt@i915_pm_rpm@module-reload:
- fi-bsw-kefka: [DMESG-WARN][11] ([i915#1982]) -> [PASS][12]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-bsw-kefka/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-bsw-kefka/igt@[email protected]
- fi-bsw-n3050: [DMESG-WARN][13] ([i915#1982]) -> [PASS][14]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-bsw-n3050/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-bsw-n3050/igt@[email protected]
* igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic:
- {fi-kbl-7560u}: [DMESG-WARN][15] ([i915#1982]) -> [PASS][16]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-kbl-7560u/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-kbl-7560u/igt@[email protected]
* igt@kms_flip@basic-flip-vs-dpms@b-hdmi-a1:
- fi-cml-s: [DMESG-WARN][17] ([i915#1982]) -> [PASS][18]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-cml-s/igt@kms_flip@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-cml-s/igt@kms_flip@[email protected]
* igt@kms_flip@basic-flip-vs-wf_vblank@c-edp1:
- fi-icl-u2: [DMESG-WARN][19] ([i915#1982]) -> [PASS][20]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-icl-u2/igt@kms_flip@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-icl-u2/igt@kms_flip@[email protected]
* igt@kms_flip@basic-flip-vs-wf_vblank@c-hdmi-a2:
- fi-skl-guc: [DMESG-WARN][21] ([i915#2203]) -> [PASS][22]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-skl-guc/igt@kms_flip@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-skl-guc/igt@kms_flip@[email protected]
* igt@prime_self_import@basic-with_two_bos:
- fi-tgl-y: [DMESG-WARN][23] ([i915#402]) -> [PASS][24] +1 similar issue
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-tgl-y/igt@prime_self_import@basic-with_two_bos.html
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-tgl-y/igt@prime_self_import@basic-with_two_bos.html
#### Warnings ####
* igt@gem_exec_suspend@basic-s0:
- fi-kbl-x1275: [DMESG-WARN][25] ([i915#1982] / [i915#62] / [i915#92] / [i915#95]) -> [DMESG-WARN][26] ([i915#62] / [i915#92] / [i915#95])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-kbl-x1275/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-kbl-x1275/igt@[email protected]
* igt@i915_pm_rpm@basic-pci-d3-state:
- fi-kbl-x1275: [DMESG-WARN][27] ([i915#62] / [i915#92] / [i915#95]) -> [DMESG-WARN][28] ([i915#62] / [i915#92]) +1 similar issue
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-kbl-x1275/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-kbl-x1275/igt@[email protected]
* igt@kms_cursor_legacy@basic-flip-after-cursor-legacy:
- fi-kbl-x1275: [DMESG-WARN][29] ([i915#62] / [i915#92]) -> [DMESG-WARN][30] ([i915#62] / [i915#92] / [i915#95]) +8 similar issues
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/fi-kbl-x1275/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/fi-kbl-x1275/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[i915#1635]: https://gitlab.freedesktop.org/drm/intel/issues/1635
[i915#1888]: https://gitlab.freedesktop.org/drm/intel/issues/1888
[i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
[i915#2120]: https://gitlab.freedesktop.org/drm/intel/issues/2120
[i915#2203]: https://gitlab.freedesktop.org/drm/intel/issues/2203
[i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402
[i915#62]: https://gitlab.freedesktop.org/drm/intel/issues/62
[i915#92]: https://gitlab.freedesktop.org/drm/intel/issues/92
[i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
Participating hosts (47 -> 40)
------------------------------
Missing (7): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper fi-bdw-samus
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_5746 -> IGTPW_4793
CI-20190529: 20190529
CI_DRM_8778: 5ead5989a42079951e6f0b7b6a072a690df0b985 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_4793: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/index.html
IGT_5746: d818f0c54e5e781ba3fb372aab8f270cf153776c @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Testlist changes ==
+igt@kms_dither@fb-8bpc-vs-panel-6bpc
+igt@kms_dither@fb-8bpc-vs-panel-8bpc
+igt@kms_dither@fb-8bpc-vs-panel-10bpc
+igt@kms_dither@fb-10bpc-vs-panel-6bpc
+igt@kms_dither@fb-10bpc-vs-panel-8bpc
+igt@kms_dither@fb-10bpc-vs-panel-10bpc
+igt@kms_dither@fb-16bpc-vs-panel-6bpc
+igt@kms_dither@fb-16bpc-vs-panel-8bpc
+igt@kms_dither@fb-16bpc-vs-panel-10bpc
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.IGT: success for Add new IGT test to validate crtc Dithering (rev3)
In reply to Bhanuprakash Modem== Series Details ==
== Series Details ==
Series: Add new IGT test to validate crtc Dithering (rev3)
URL : https://patchwork.freedesktop.org/series/79661/
State : success
== Summary ==
CI Bug Log - changes from IGT_5746_full -> IGTPW_4793_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/index.html
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_4793_full:
### IGT changes ###
#### Possible regressions ####
* {igt@kms_dither@fb-8bpc-vs-panel-6bpc} (NEW):
- shard-iclb: NOTRUN -> [SKIP][1] +8 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-iclb5/igt@[email protected]
* {igt@kms_dither@fb-8bpc-vs-panel-8bpc} (NEW):
- shard-tglb: NOTRUN -> [SKIP][2] +8 similar issues
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-tglb3/igt@[email protected]
New tests
---------
New tests have been introduced between IGT_5746_full and IGTPW_4793_full:
### New IGT tests (9) ###
* igt@kms_dither@fb-10bpc-vs-panel-10bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-10bpc-vs-panel-6bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-10bpc-vs-panel-8bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0] s
* igt@kms_dither@fb-16bpc-vs-panel-10bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-16bpc-vs-panel-6bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-16bpc-vs-panel-8bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0] s
* igt@kms_dither@fb-8bpc-vs-panel-10bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-8bpc-vs-panel-6bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0] s
* igt@kms_dither@fb-8bpc-vs-panel-8bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
Known issues
------------
Here are the changes found in IGTPW_4793_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_balancer@bonded-early:
- shard-kbl: [PASS][3] -> [FAIL][4] ([i915#2079])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-kbl3/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-kbl1/igt@[email protected]
* igt@gem_exec_fence@syncobj-repeat:
- shard-hsw: [PASS][5] -> [TIMEOUT][6] ([i915#1958] / [i915#2119]) +3 similar issues
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-hsw6/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-hsw8/igt@[email protected]
* igt@i915_module_load@reload-with-fault-injection:
- shard-tglb: [PASS][7] -> [DMESG-WARN][8] ([i915#402]) +1 similar issue
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-tglb5/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-tglb5/igt@[email protected]
* igt@i915_pm_rc6_residency@rc6-idle:
- shard-iclb: [PASS][9] -> [WARN][10] ([i915#1515])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-iclb4/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-iclb1/igt@[email protected]
* igt@i915_suspend@forcewake:
- shard-kbl: [PASS][11] -> [INCOMPLETE][12] ([i915#155] / [i915#636])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-kbl4/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-kbl4/igt@[email protected]
* igt@kms_big_fb@y-tiled-64bpp-rotate-0:
- shard-glk: [PASS][13] -> [DMESG-FAIL][14] ([i915#118] / [i915#95])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-glk7/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-glk8/igt@[email protected]
* igt@kms_cursor_legacy@cursora-vs-flipa-varying-size:
- shard-apl: [PASS][15] -> [DMESG-WARN][16] ([i915#1635] / [i915#1982]) +1 similar issue
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-apl7/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-apl3/igt@[email protected]
* igt@kms_flip@flip-vs-suspend@c-dp1:
- shard-kbl: [PASS][17] -> [DMESG-WARN][18] ([i915#180]) +4 similar issues
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-kbl7/igt@kms_flip@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-kbl6/igt@kms_flip@[email protected]
* igt@kms_flip@flip-vs-suspend@c-hdmi-a1:
- shard-hsw: [PASS][19] -> [INCOMPLETE][20] ([i915#2055])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-hsw1/igt@kms_flip@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-hsw8/igt@kms_flip@[email protected]
* igt@kms_flip@plain-flip-ts-check-interruptible@a-edp1:
- shard-tglb: [PASS][21] -> [DMESG-WARN][22] ([i915#1982]) +3 similar issues
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-tglb6/igt@kms_flip@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-tglb2/igt@kms_flip@[email protected]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-onoff:
- shard-kbl: [PASS][23] -> [DMESG-WARN][24] ([i915#1982])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-kbl6/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-kbl3/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-spr-indfb-draw-pwrite:
- shard-glk: [PASS][25] -> [FAIL][26] ([i915#49])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-glk5/igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-spr-indfb-draw-pwrite.html
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-glk8/igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-spr-indfb-draw-pwrite.html
* igt@kms_getfb@getfb-handle-closed:
- shard-snb: [PASS][27] -> [TIMEOUT][28] ([i915#1958] / [i915#2119]) +3 similar issues
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-snb4/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-snb2/igt@[email protected]
* igt@kms_psr@psr2_primary_page_flip:
- shard-iclb: [PASS][29] -> [SKIP][30] ([fdo#109441]) +3 similar issues
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-iclb2/igt@kms_psr@psr2_primary_page_flip.html
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-iclb6/igt@kms_psr@psr2_primary_page_flip.html
* igt@kms_vblank@pipe-b-ts-continuation-suspend:
- shard-tglb: [PASS][31] -> [INCOMPLETE][32] ([i915#1798] / [i915#456])
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-tglb6/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-tglb5/igt@[email protected]
#### Possible fixes ####
* igt@gem_exec_whisper@basic-contexts-priority-all:
- shard-glk: [DMESG-WARN][33] ([i915#118] / [i915#95]) -> [PASS][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-glk9/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-glk2/igt@[email protected]
* igt@gem_fenced_exec_thrash@2-spare-fences:
- shard-hsw: [TIMEOUT][35] ([i915#1958] / [i915#2119]) -> [PASS][36] +3 similar issues
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-hsw4/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-hsw6/igt@[email protected]
- shard-snb: [TIMEOUT][37] ([i915#1958] / [i915#2119]) -> [PASS][38] +2 similar issues
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-snb5/igt@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-snb1/igt@[email protected]
* {igt@gem_huc_copy@huc-copy}:
- shard-tglb: [SKIP][39] ([i915#2190]) -> [PASS][40]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-tglb6/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-tglb8/igt@[email protected]
* igt@gen9_exec_parse@allowed-all:
- shard-apl: [DMESG-WARN][41] ([i915#1436] / [i915#1635] / [i915#716]) -> [PASS][42]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-apl4/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-apl6/igt@[email protected]
* igt@i915_module_load@reload:
- shard-tglb: [DMESG-WARN][43] ([i915#402]) -> [PASS][44] +2 similar issues
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-tglb1/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-tglb8/igt@[email protected]
* igt@i915_pm_dc@dc6-psr:
- shard-iclb: [FAIL][45] ([i915#454]) -> [PASS][46]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-iclb6/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-iclb5/igt@[email protected]
* igt@i915_pm_rc6_residency@rc6-fence:
- shard-hsw: [WARN][47] ([i915#1519]) -> [PASS][48]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-hsw1/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-hsw5/igt@[email protected]
* igt@kms_big_fb@x-tiled-8bpp-rotate-180:
- shard-apl: [DMESG-WARN][49] ([i915#1635] / [i915#1982]) -> [PASS][50] +1 similar issue
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-apl6/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-apl2/igt@[email protected]
* igt@kms_big_fb@y-tiled-64bpp-rotate-0:
- shard-iclb: [FAIL][51] ([i915#1119]) -> [PASS][52]
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-iclb2/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-iclb1/igt@[email protected]
* igt@kms_cursor_crc@pipe-c-cursor-dpms:
- shard-glk: [FAIL][53] ([i915#54]) -> [PASS][54]
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-glk5/igt@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-glk5/igt@[email protected]
- shard-apl: [FAIL][55] ([i915#1635] / [i915#54]) -> [PASS][56]
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-apl1/igt@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-apl7/igt@[email protected]
- shard-kbl: [FAIL][57] ([i915#54]) -> [PASS][58]
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-kbl2/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-kbl3/igt@[email protected]
* igt@kms_flip@flip-vs-expired-vblank-interruptible@a-hdmi-a2:
- shard-glk: [FAIL][59] ([i915#79]) -> [PASS][60]
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-glk7/igt@kms_flip@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-glk9/igt@kms_flip@[email protected]
* igt@kms_flip@flip-vs-suspend-interruptible@a-dp1:
- shard-kbl: [DMESG-WARN][61] ([i915#180]) -> [PASS][62] +4 similar issues
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-kbl4/igt@kms_flip@[email protected]
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-kbl6/igt@kms_flip@[email protected]
* igt@kms_frontbuffer_tracking@psr-1p-offscren-pri-indfb-draw-blt:
- shard-tglb: [DMESG-WARN][63] ([i915#1982]) -> [PASS][64] +5 similar issues
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-tglb5/igt@[email protected]
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-tglb2/igt@[email protected]
* igt@kms_hdmi_inject@inject-audio:
- shard-tglb: [SKIP][65] ([i915#433]) -> [PASS][66]
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-tglb1/igt@[email protected]
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-tglb8/igt@[email protected]
* igt@kms_plane@plane-panning-bottom-right-suspend-pipe-a-planes:
- shard-glk: [DMESG-WARN][67] ([i915#1982]) -> [PASS][68] +1 similar issue
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-glk8/igt@[email protected]
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-glk8/igt@[email protected]
* igt@kms_psr@psr2_cursor_plane_move:
- shard-iclb: [SKIP][69] ([fdo#109441]) -> [PASS][70] +1 similar issue
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-iclb1/igt@kms_psr@psr2_cursor_plane_move.html
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-iclb2/igt@kms_psr@psr2_cursor_plane_move.html
* igt@kms_setmode@basic:
- shard-apl: [FAIL][71] ([i915#1635] / [i915#31]) -> [PASS][72]
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-apl6/igt@[email protected]
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-apl1/igt@[email protected]
* igt@kms_vblank@pipe-c-wait-idle:
- shard-kbl: [DMESG-WARN][73] ([i915#1982]) -> [PASS][74]
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-kbl7/igt@[email protected]
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-kbl2/igt@[email protected]
* igt@perf@blocking-parameterized:
- shard-iclb: [FAIL][75] ([i915#1542]) -> [PASS][76]
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-iclb8/igt@[email protected]
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-iclb1/igt@[email protected]
* igt@sysfs_preempt_timeout@timeout@vecs0:
- shard-apl: [FAIL][77] ([i915#1635]) -> [PASS][78]
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-apl3/igt@sysfs_preempt_timeout@[email protected]
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-apl6/igt@sysfs_preempt_timeout@[email protected]
#### Warnings ####
* igt@gem_ctx_persistence@engines-hang:
- shard-hsw: [TIMEOUT][79] ([i915#1958] / [i915#2119]) -> [SKIP][80] ([fdo#109271] / [i915#1099])
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-hsw4/igt@[email protected]
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-hsw1/igt@[email protected]
- shard-snb: [TIMEOUT][81] ([i915#1958] / [i915#2119]) -> [SKIP][82] ([fdo#109271] / [i915#1099])
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-snb5/igt@[email protected]
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-snb6/igt@[email protected]
* igt@kms_big_fb@yf-tiled-64bpp-rotate-90:
- shard-hsw: [SKIP][83] ([fdo#109271]) -> [TIMEOUT][84] ([i915#1958] / [i915#2119])
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-hsw1/igt@[email protected]
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-hsw8/igt@[email protected]
* igt@kms_flip@2x-flip-vs-panning-interruptible:
- shard-snb: [SKIP][85] ([fdo#109271]) -> [TIMEOUT][86] ([i915#1958] / [i915#2119]) +1 similar issue
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-snb2/igt@[email protected]
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-snb2/igt@[email protected]
* igt@kms_frontbuffer_tracking@psr-2p-scndscrn-pri-shrfb-draw-mmap-cpu:
- shard-hsw: [TIMEOUT][87] ([i915#1958] / [i915#2119]) -> [SKIP][88] ([fdo#109271])
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-hsw4/igt@kms_frontbuffer_tracking@psr-2p-scndscrn-pri-shrfb-draw-mmap-cpu.html
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-hsw1/igt@kms_frontbuffer_tracking@psr-2p-scndscrn-pri-shrfb-draw-mmap-cpu.html
* igt@kms_universal_plane@universal-plane-pipe-c-functional:
- shard-snb: [TIMEOUT][89] ([i915#1958] / [i915#2119]) -> [SKIP][90] ([fdo#109271]) +1 similar issue
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5746/shard-snb5/igt@[email protected]
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/shard-snb4/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[i915#1099]: https://gitlab.freedesktop.org/drm/intel/issues/1099
[i915#1119]: https://gitlab.freedesktop.org/drm/intel/issues/1119
[i915#118]: https://gitlab.freedesktop.org/drm/intel/issues/118
[i915#1436]: https://gitlab.freedesktop.org/drm/intel/issues/1436
[i915#1515]: https://gitlab.freedesktop.org/drm/intel/issues/1515
[i915#1519]: https://gitlab.freedesktop.org/drm/intel/issues/1519
[i915#1542]: https://gitlab.freedesktop.org/drm/intel/issues/1542
[i915#155]: https://gitlab.freedesktop.org/drm/intel/issues/155
[i915#1635]: https://gitlab.freedesktop.org/drm/intel/issues/1635
[i915#1798]: https://gitlab.freedesktop.org/drm/intel/issues/1798
[i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
[i915#1958]: https://gitlab.freedesktop.org/drm/intel/issues/1958
[i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
[i915#2055]: https://gitlab.freedesktop.org/drm/intel/issues/2055
[i915#2079]: https://gitlab.freedesktop.org/drm/intel/issues/2079
[i915#2119]: https://gitlab.freedesktop.org/drm/intel/issues/2119
[i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
[i915#31]: https://gitlab.freedesktop.org/drm/intel/issues/31
[i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402
[i915#433]: https://gitlab.freedesktop.org/drm/intel/issues/433
[i915#454]: https://gitlab.freedesktop.org/drm/intel/issues/454
[i915#456]: https://gitlab.freedesktop.org/drm/intel/issues/456
[i915#49]: https://gitlab.freedesktop.org/drm/intel/issues/49
[i915#54]: https://gitlab.freedesktop.org/drm/intel/issues/54
[i915#636]: https://gitlab.freedesktop.org/drm/intel/issues/636
[i915#716]: https://gitlab.freedesktop.org/drm/intel/issues/716
[i915#79]: https://gitlab.freedesktop.org/drm/intel/issues/79
[i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
Participating hosts (8 -> 8)
------------------------------
No changes in participating hosts
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_5746 -> IGTPW_4793
CI-20190529: 20190529
CI_DRM_8778: 5ead5989a42079951e6f0b7b6a072a690df0b985 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_4793: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/index.html
IGT_5746: d818f0c54e5e781ba3fb372aab8f270cf153776c @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4793/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for Add new IGT test to validate crtc Dithering (rev4)
In reply to Bhanuprakash Modem== Series Details ==
== Series Details ==
Series: Add new IGT test to validate crtc Dithering (rev4)
URL : https://patchwork.freedesktop.org/series/79661/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_8786 -> IGTPW_4803
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/index.html
Known issues
------------
Here are the changes found in IGTPW_4803 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@i915_module_load@reload:
- fi-bsw-kefka: [PASS][1] -> [DMESG-WARN][2] ([i915#1982])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/fi-bsw-kefka/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/fi-bsw-kefka/igt@[email protected]
* igt@i915_pm_rpm@basic-pci-d3-state:
- fi-byt-j1900: [PASS][3] -> [DMESG-WARN][4] ([i915#1982])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/fi-byt-j1900/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/fi-byt-j1900/igt@[email protected]
* igt@i915_pm_rpm@module-reload:
- fi-apl-guc: [PASS][5] -> [DMESG-WARN][6] ([i915#1635] / [i915#1982])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/fi-apl-guc/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/fi-apl-guc/igt@[email protected]
* igt@kms_addfb_basic@bad-pitch-63:
- fi-tgl-y: [PASS][7] -> [DMESG-WARN][8] ([i915#402]) +1 similar issue
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/fi-tgl-y/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/fi-tgl-y/igt@[email protected]
* igt@kms_busy@basic@flip:
- fi-kbl-x1275: [PASS][9] -> [DMESG-WARN][10] ([i915#62] / [i915#92] / [i915#95])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/fi-kbl-x1275/igt@kms_busy@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/fi-kbl-x1275/igt@kms_busy@[email protected]
#### Possible fixes ####
* igt@gem_exec_suspend@basic-s3:
- fi-tgl-u2: [FAIL][11] ([i915#1888]) -> [PASS][12] +1 similar issue
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/fi-tgl-u2/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/fi-tgl-u2/igt@[email protected]
* igt@i915_pm_rpm@module-reload:
- fi-bsw-kefka: [DMESG-WARN][13] ([i915#1982]) -> [PASS][14]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/fi-bsw-kefka/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/fi-bsw-kefka/igt@[email protected]
* igt@kms_addfb_basic@bad-pitch-0:
- fi-tgl-y: [DMESG-WARN][15] ([i915#402]) -> [PASS][16]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/fi-tgl-y/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/fi-tgl-y/igt@[email protected]
* igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic:
- {fi-kbl-7560u}: [DMESG-WARN][17] ([i915#1982]) -> [PASS][18]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/fi-kbl-7560u/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/fi-kbl-7560u/igt@[email protected]
#### Warnings ####
* igt@i915_pm_rpm@basic-rte:
- fi-kbl-guc: [SKIP][19] ([fdo#109271]) -> [DMESG-FAIL][20] ([i915#2203])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/fi-kbl-guc/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/fi-kbl-guc/igt@[email protected]
* igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy:
- fi-kbl-x1275: [DMESG-WARN][21] ([i915#62] / [i915#92]) -> [DMESG-WARN][22] ([i915#62] / [i915#92] / [i915#95]) +3 similar issues
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/fi-kbl-x1275/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/fi-kbl-x1275/igt@[email protected]
* igt@kms_cursor_legacy@basic-flip-before-cursor-atomic:
- fi-kbl-x1275: [DMESG-WARN][23] ([i915#62] / [i915#92] / [i915#95]) -> [DMESG-WARN][24] ([i915#62] / [i915#92]) +2 similar issues
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/fi-kbl-x1275/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/fi-kbl-x1275/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[i915#1635]: https://gitlab.freedesktop.org/drm/intel/issues/1635
[i915#1888]: https://gitlab.freedesktop.org/drm/intel/issues/1888
[i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
[i915#2203]: https://gitlab.freedesktop.org/drm/intel/issues/2203
[i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402
[i915#62]: https://gitlab.freedesktop.org/drm/intel/issues/62
[i915#92]: https://gitlab.freedesktop.org/drm/intel/issues/92
[i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
Participating hosts (47 -> 36)
------------------------------
Missing (11): fi-cml-u2 fi-ilk-m540 fi-cml-s fi-hsw-4200u fi-byt-squawks fi-icl-u2 fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper fi-bdw-samus fi-kbl-r
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_5747 -> IGTPW_4803
CI-20190529: 20190529
CI_DRM_8786: e9ecbe8de4e7e7c08363c1ecaaee9270b9c6f2ec @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_4803: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/index.html
IGT_5747: 6980775bcadec862cd5e5affd65928ef79e5b580 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Testlist changes ==
+igt@kms_dither@fb-8bpc-vs-panel-6bpc
+igt@kms_dither@fb-8bpc-vs-panel-8bpc
+igt@kms_dither@fb-8bpc-vs-panel-10bpc
+igt@kms_dither@fb-10bpc-vs-panel-6bpc
+igt@kms_dither@fb-10bpc-vs-panel-8bpc
+igt@kms_dither@fb-10bpc-vs-panel-10bpc
+igt@kms_dither@fb-16bpc-vs-panel-6bpc
+igt@kms_dither@fb-16bpc-vs-panel-8bpc
+igt@kms_dither@fb-16bpc-vs-panel-10bpc
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.IGT: success for Add new IGT test to validate crtc Dithering (rev4)
In reply to Bhanuprakash Modem== Series Details ==
== Series Details ==
Series: Add new IGT test to validate crtc Dithering (rev4)
URL : https://patchwork.freedesktop.org/series/79661/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_8786_full -> IGTPW_4803_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/index.html
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_4803_full:
### IGT changes ###
#### Possible regressions ####
* {igt@kms_dither@fb-8bpc-vs-panel-6bpc} (NEW):
- shard-iclb: NOTRUN -> [SKIP][1] +8 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-iclb4/igt@[email protected]
* {igt@kms_dither@fb-8bpc-vs-panel-8bpc} (NEW):
- shard-tglb: NOTRUN -> [SKIP][2] +8 similar issues
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-tglb3/igt@[email protected]
New tests
---------
New tests have been introduced between CI_DRM_8786_full and IGTPW_4803_full:
### New IGT tests (9) ###
* igt@kms_dither@fb-10bpc-vs-panel-10bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-10bpc-vs-panel-6bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0] s
* igt@kms_dither@fb-10bpc-vs-panel-8bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-16bpc-vs-panel-10bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-16bpc-vs-panel-6bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-16bpc-vs-panel-8bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0] s
* igt@kms_dither@fb-8bpc-vs-panel-10bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-8bpc-vs-panel-6bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-8bpc-vs-panel-8bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
Known issues
------------
Here are the changes found in IGTPW_4803_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_flush@basic-uc-prw-default:
- shard-tglb: [PASS][3] -> [DMESG-WARN][4] ([i915#402])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-tglb8/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-tglb1/igt@[email protected]
* igt@i915_pm_rc6_residency@rc6-idle:
- shard-hsw: [PASS][5] -> [WARN][6] ([i915#1519])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-hsw2/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-hsw4/igt@[email protected]
* igt@kms_cursor_crc@pipe-c-cursor-suspend:
- shard-kbl: [PASS][7] -> [DMESG-WARN][8] ([i915#180]) +7 similar issues
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-kbl1/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-kbl6/igt@[email protected]
* igt@kms_flip@2x-flip-vs-expired-vblank@ac-hdmi-a1-hdmi-a2:
- shard-glk: [PASS][9] -> [FAIL][10] ([i915#79])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-glk8/igt@kms_flip@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-glk1/igt@kms_flip@[email protected]
* igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-indfb-draw-blt:
- shard-kbl: [PASS][11] -> [DMESG-WARN][12] ([i915#1982])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-kbl2/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-kbl3/igt@[email protected]
* igt@kms_frontbuffer_tracking@psr-1p-primscrn-spr-indfb-draw-blt:
- shard-tglb: [PASS][13] -> [DMESG-WARN][14] ([i915#1982]) +2 similar issues
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-tglb3/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-tglb5/igt@[email protected]
* igt@kms_psr@psr2_cursor_plane_move:
- shard-iclb: [PASS][15] -> [SKIP][16] ([fdo#109441]) +3 similar issues
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-iclb2/igt@kms_psr@psr2_cursor_plane_move.html
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-iclb6/igt@kms_psr@psr2_cursor_plane_move.html
* igt@kms_vblank@pipe-b-wait-busy:
- shard-apl: [PASS][17] -> [DMESG-WARN][18] ([i915#1635] / [i915#1982])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-apl4/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-apl3/igt@[email protected]
* igt@kms_vblank@pipe-b-wait-idle-hang:
- shard-hsw: [PASS][19] -> [TIMEOUT][20] ([i915#1958] / [i915#2119])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-hsw1/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-hsw2/igt@[email protected]
- shard-snb: [PASS][21] -> [TIMEOUT][22] ([i915#1958] / [i915#2119])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-snb1/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-snb1/igt@[email protected]
* igt@perf@blocking-parameterized:
- shard-iclb: [PASS][23] -> [FAIL][24] ([i915#1542])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-iclb1/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-iclb6/igt@[email protected]
#### Possible fixes ####
* igt@gem_exec_gttfill@engines@bcs0:
- shard-tglb: [INCOMPLETE][25] -> [PASS][26]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-tglb8/igt@gem_exec_gttfill@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-tglb1/igt@gem_exec_gttfill@[email protected]
* igt@gem_exec_whisper@basic-fds-forked:
- shard-glk: [DMESG-WARN][27] ([i915#118] / [i915#95]) -> [PASS][28]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-glk3/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-glk5/igt@[email protected]
* igt@i915_getparams_basic@basic-subslice-total:
- shard-hsw: [TIMEOUT][29] ([i915#1958] / [i915#2119]) -> [PASS][30] +1 similar issue
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-hsw6/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-hsw6/igt@[email protected]
* igt@i915_module_load@reload-with-fault-injection:
- shard-tglb: [DMESG-WARN][31] ([i915#402]) -> [PASS][32] +2 similar issues
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-tglb1/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-tglb2/igt@[email protected]
* igt@i915_pm_dc@dc6-psr:
- shard-iclb: [FAIL][33] ([i915#454]) -> [PASS][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-iclb2/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-iclb6/igt@[email protected]
* igt@kms_big_fb@y-tiled-64bpp-rotate-180:
- shard-glk: [DMESG-FAIL][35] ([i915#118] / [i915#95]) -> [PASS][36]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-glk8/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-glk1/igt@[email protected]
* igt@kms_cursor_edge_walk@pipe-b-256x256-bottom-edge:
- shard-glk: [DMESG-WARN][37] ([i915#1982]) -> [PASS][38] +1 similar issue
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-glk4/igt@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-glk3/igt@[email protected]
* igt@kms_cursor_legacy@flip-vs-cursor-crc-atomic:
- shard-glk: [FAIL][39] ([i915#1566]) -> [PASS][40]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-glk9/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-glk7/igt@[email protected]
* igt@kms_draw_crc@draw-method-xrgb2101010-pwrite-xtiled:
- shard-kbl: [DMESG-WARN][41] ([i915#1982]) -> [PASS][42] +1 similar issue
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-kbl6/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-kbl6/igt@[email protected]
* igt@kms_flip@flip-vs-suspend@c-hdmi-a1:
- shard-hsw: [INCOMPLETE][43] ([i915#2055]) -> [PASS][44]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-hsw4/igt@kms_flip@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-hsw6/igt@kms_flip@[email protected]
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
- shard-kbl: [DMESG-WARN][45] ([i915#180]) -> [PASS][46] +4 similar issues
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-kbl3/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-kbl3/igt@[email protected]
* igt@kms_psr@psr2_sprite_plane_move:
- shard-iclb: [SKIP][47] ([fdo#109441]) -> [PASS][48] +1 similar issue
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-iclb1/igt@kms_psr@psr2_sprite_plane_move.html
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-iclb2/igt@kms_psr@psr2_sprite_plane_move.html
* igt@perf@polling-parameterized:
- shard-iclb: [FAIL][49] ([i915#1542]) -> [PASS][50]
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-iclb7/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-iclb5/igt@[email protected]
* igt@perf_pmu@module-unload:
- shard-tglb: [DMESG-WARN][51] ([i915#1982]) -> [PASS][52] +3 similar issues
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-tglb2/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-tglb1/igt@[email protected]
#### Warnings ####
* igt@gem_exec_reloc@basic-concurrent16:
- shard-snb: [FAIL][53] ([i915#1930]) -> [TIMEOUT][54] ([i915#1958] / [i915#2119])
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-snb2/igt@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-snb1/igt@[email protected]
* igt@kms_big_fb@y-tiled-32bpp-rotate-90:
- shard-hsw: [TIMEOUT][55] ([i915#1958] / [i915#2119]) -> [SKIP][56] ([fdo#109271]) +1 similar issue
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-hsw6/igt@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-hsw4/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbcpsr-1p-offscren-pri-indfb-draw-render:
- shard-hsw: [SKIP][57] ([fdo#109271]) -> [TIMEOUT][58] ([i915#1958] / [i915#2119]) +2 similar issues
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-hsw8/igt@kms_frontbuffer_tracking@fbcpsr-1p-offscren-pri-indfb-draw-render.html
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-hsw2/igt@kms_frontbuffer_tracking@fbcpsr-1p-offscren-pri-indfb-draw-render.html
* igt@kms_psr@psr2_no_drrs:
- shard-snb: [SKIP][59] ([fdo#109271]) -> [TIMEOUT][60] ([i915#1958] / [i915#2119]) +4 similar issues
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8786/shard-snb4/igt@kms_psr@psr2_no_drrs.html
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/shard-snb1/igt@kms_psr@psr2_no_drrs.html
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[i915#118]: https://gitlab.freedesktop.org/drm/intel/issues/118
[i915#1519]: https://gitlab.freedesktop.org/drm/intel/issues/1519
[i915#1542]: https://gitlab.freedesktop.org/drm/intel/issues/1542
[i915#1566]: https://gitlab.freedesktop.org/drm/intel/issues/1566
[i915#1635]: https://gitlab.freedesktop.org/drm/intel/issues/1635
[i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
[i915#1930]: https://gitlab.freedesktop.org/drm/intel/issues/1930
[i915#1958]: https://gitlab.freedesktop.org/drm/intel/issues/1958
[i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
[i915#2055]: https://gitlab.freedesktop.org/drm/intel/issues/2055
[i915#2119]: https://gitlab.freedesktop.org/drm/intel/issues/2119
[i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402
[i915#454]: https://gitlab.freedesktop.org/drm/intel/issues/454
[i915#79]: https://gitlab.freedesktop.org/drm/intel/issues/79
[i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
Participating hosts (11 -> 8)
------------------------------
Missing (3): pig-skl-6260u pig-glk-j5005 pig-icl-1065g7
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_5747 -> IGTPW_4803
* Piglit: piglit_4509 -> None
CI-20190529: 20190529
CI_DRM_8786: e9ecbe8de4e7e7c08363c1ecaaee9270b9c6f2ec @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_4803: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/index.html
IGT_5747: 6980775bcadec862cd5e5affd65928ef79e5b580 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4803/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for Add new IGT test to validate crtc Dithering (rev6)
In reply to Bhanuprakash Modem== Series Details ==
== Series Details ==
Series: Add new IGT test to validate crtc Dithering (rev6)
URL : https://patchwork.freedesktop.org/series/79661/
State : success
== Summary ==
CI Bug Log - changes from IGT_5752 -> IGTPW_4826
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/index.html
Known issues
------------
Here are the changes found in IGTPW_4826 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@i915_module_load@reload:
- fi-bsw-kefka: [PASS][1] -> [DMESG-WARN][2] ([i915#1982])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/fi-bsw-kefka/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/fi-bsw-kefka/igt@[email protected]
#### Possible fixes ####
* igt@gem_exec_suspend@basic-s3:
- fi-tgl-u2: [FAIL][3] ([i915#1888]) -> [PASS][4] +1 similar issue
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/fi-tgl-u2/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/fi-tgl-u2/igt@[email protected]
* igt@i915_pm_rpm@basic-pci-d3-state:
- fi-byt-j1900: [DMESG-WARN][5] ([i915#1982]) -> [PASS][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/fi-byt-j1900/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/fi-byt-j1900/igt@[email protected]
* igt@i915_pm_rpm@module-reload:
- {fi-kbl-7560u}: [WARN][7] -> [PASS][8]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/fi-kbl-7560u/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/fi-kbl-7560u/igt@[email protected]
* igt@i915_selftest@live@gt_lrc:
- fi-tgl-u2: [DMESG-FAIL][9] ([i915#1233]) -> [PASS][10]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/fi-tgl-u2/igt@i915_selftest@live@gt_lrc.html
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/fi-tgl-u2/igt@i915_selftest@live@gt_lrc.html
* igt@kms_setmode@basic-clone-single-crtc:
- {fi-kbl-7560u}: [WARN][11] ([i915#2100]) -> [PASS][12]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/fi-kbl-7560u/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/fi-kbl-7560u/igt@[email protected]
#### Warnings ####
* igt@gem_exec_suspend@basic-s0:
- fi-kbl-x1275: [DMESG-WARN][13] ([i915#62] / [i915#92] / [i915#95]) -> [DMESG-WARN][14] ([i915#1982] / [i915#62] / [i915#92] / [i915#95])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/fi-kbl-x1275/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/fi-kbl-x1275/igt@[email protected]
* igt@kms_cursor_legacy@basic-flip-after-cursor-legacy:
- fi-kbl-x1275: [DMESG-WARN][15] ([i915#62] / [i915#92] / [i915#95]) -> [DMESG-WARN][16] ([i915#62] / [i915#92]) +2 similar issues
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/fi-kbl-x1275/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/fi-kbl-x1275/igt@[email protected]
* igt@kms_force_connector_basic@force-edid:
- fi-kbl-x1275: [DMESG-WARN][17] ([i915#62] / [i915#92]) -> [DMESG-WARN][18] ([i915#62] / [i915#92] / [i915#95]) +2 similar issues
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/fi-kbl-x1275/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/fi-kbl-x1275/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[i915#1233]: https://gitlab.freedesktop.org/drm/intel/issues/1233
[i915#1888]: https://gitlab.freedesktop.org/drm/intel/issues/1888
[i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
[i915#2100]: https://gitlab.freedesktop.org/drm/intel/issues/2100
[i915#62]: https://gitlab.freedesktop.org/drm/intel/issues/62
[i915#92]: https://gitlab.freedesktop.org/drm/intel/issues/92
[i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
Participating hosts (43 -> 36)
------------------------------
Missing (7): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper fi-bdw-samus
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_5752 -> IGTPW_4826
CI-20190529: 20190529
CI_DRM_8815: 521846d50ed323d4dcb0ffafa63e34528b0a4996 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_4826: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/index.html
IGT_5752: 3ecf9d88803a686354394ea60164551646235273 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Testlist changes ==
+igt@kms_dither@fb-8bpc-vs-panel-6bpc
+igt@kms_dither@fb-8bpc-vs-panel-6bpc-suspend
+igt@kms_dither@fb-8bpc-vs-panel-8bpc
+igt@kms_dither@fb-8bpc-vs-panel-8bpc-suspend
+igt@kms_dither@fb-8bpc-vs-panel-10bpc
+igt@kms_dither@fb-8bpc-vs-panel-10bpc-suspend
+igt@kms_dither@fb-10bpc-vs-panel-6bpc
+igt@kms_dither@fb-10bpc-vs-panel-6bpc-suspend
+igt@kms_dither@fb-10bpc-vs-panel-8bpc
+igt@kms_dither@fb-10bpc-vs-panel-8bpc-suspend
+igt@kms_dither@fb-10bpc-vs-panel-10bpc
+igt@kms_dither@fb-10bpc-vs-panel-10bpc-suspend
+igt@kms_dither@fb-16bpc-vs-panel-6bpc
+igt@kms_dither@fb-16bpc-vs-panel-6bpc-suspend
+igt@kms_dither@fb-16bpc-vs-panel-8bpc
+igt@kms_dither@fb-16bpc-vs-panel-8bpc-suspend
+igt@kms_dither@fb-16bpc-vs-panel-10bpc
+igt@kms_dither@fb-16bpc-vs-panel-10bpc-suspend
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ Fi.CI.IGT: failure for Add new IGT test to validate crtc Dithering (rev6)
In reply to Bhanuprakash Modem== Series Details ==
== Series Details ==
Series: Add new IGT test to validate crtc Dithering (rev6)
URL : https://patchwork.freedesktop.org/series/79661/
State : failure
== Summary ==
CI Bug Log - changes from IGT_5752_full -> IGTPW_4826_full
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with IGTPW_4826_full absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in IGTPW_4826_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/index.html
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_4826_full:
### IGT changes ###
#### Possible regressions ####
* igt@gem_exec_parallel@contexts@bcs0:
- shard-kbl: [PASS][1] -> [INCOMPLETE][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-kbl4/igt@gem_exec_parallel@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-kbl7/igt@gem_exec_parallel@[email protected]
* {igt@kms_dither@fb-8bpc-vs-panel-6bpc} (NEW):
- shard-iclb: NOTRUN -> [SKIP][3] +16 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-iclb1/igt@[email protected]
* {igt@kms_dither@fb-8bpc-vs-panel-6bpc-suspend} (NEW):
- shard-tglb: NOTRUN -> [SKIP][4] +16 similar issues
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-tglb8/igt@[email protected]
* igt@kms_flip@2x-flip-vs-fences@bc-vga1-hdmi-a1:
- shard-hsw: [PASS][5] -> [INCOMPLETE][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-hsw6/igt@kms_flip@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-hsw8/igt@kms_flip@[email protected]
New tests
---------
New tests have been introduced between IGT_5752_full and IGTPW_4826_full:
### New IGT tests (18) ###
* igt@kms_dither@fb-10bpc-vs-panel-10bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-10bpc-vs-panel-10bpc-suspend:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-10bpc-vs-panel-6bpc:
- Statuses :
- Exec time: [None] s
* igt@kms_dither@fb-10bpc-vs-panel-6bpc-suspend:
- Statuses : 7 skip(s)
- Exec time: [0.0] s
* igt@kms_dither@fb-10bpc-vs-panel-8bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-10bpc-vs-panel-8bpc-suspend:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-16bpc-vs-panel-10bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-16bpc-vs-panel-10bpc-suspend:
- Statuses : 7 skip(s)
- Exec time: [0.0] s
* igt@kms_dither@fb-16bpc-vs-panel-6bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0] s
* igt@kms_dither@fb-16bpc-vs-panel-6bpc-suspend:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-16bpc-vs-panel-8bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-16bpc-vs-panel-8bpc-suspend:
- Statuses : 5 skip(s)
- Exec time: [0.0] s
* igt@kms_dither@fb-8bpc-vs-panel-10bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-8bpc-vs-panel-10bpc-suspend:
- Statuses : 6 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-8bpc-vs-panel-6bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0] s
* igt@kms_dither@fb-8bpc-vs-panel-6bpc-suspend:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-8bpc-vs-panel-8bpc:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
* igt@kms_dither@fb-8bpc-vs-panel-8bpc-suspend:
- Statuses : 7 skip(s)
- Exec time: [0.0, 0.00] s
Known issues
------------
Here are the changes found in IGTPW_4826_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_reloc@basic-concurrent0:
- shard-glk: [PASS][7] -> [FAIL][8] ([i915#1930])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-glk6/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-glk1/igt@[email protected]
* igt@gen9_exec_parse@allowed-all:
- shard-apl: [PASS][9] -> [DMESG-WARN][10] ([i915#1436] / [i915#1635] / [i915#716])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-apl8/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-apl1/igt@[email protected]
- shard-kbl: [PASS][11] -> [DMESG-WARN][12] ([i915#1436] / [i915#716])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-kbl2/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-kbl2/igt@[email protected]
* igt@i915_pm_dc@dc6-psr:
- shard-iclb: [PASS][13] -> [FAIL][14] ([i915#454])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-iclb6/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-iclb2/igt@[email protected]
* igt@kms_cursor_edge_walk@pipe-c-128x128-top-edge:
- shard-glk: [PASS][15] -> [DMESG-WARN][16] ([i915#1982])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-glk3/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-glk1/igt@[email protected]
* igt@kms_flip@2x-modeset-vs-vblank-race-interruptible@ab-vga1-hdmi-a1:
- shard-hsw: [PASS][17] -> [DMESG-WARN][18] ([i915#1982])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-hsw4/igt@kms_flip@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-hsw6/igt@kms_flip@[email protected]
* igt@kms_flip@modeset-vs-vblank-race-interruptible@a-dp1:
- shard-kbl: [PASS][19] -> [DMESG-WARN][20] ([i915#1982]) +1 similar issue
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-kbl1/igt@kms_flip@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-kbl1/igt@kms_flip@[email protected]
* igt@kms_frontbuffer_tracking@fbc-suspend:
- shard-kbl: [PASS][21] -> [DMESG-WARN][22] ([i915#180]) +2 similar issues
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-kbl1/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-kbl3/igt@[email protected]
* igt@kms_frontbuffer_tracking@psr-rgb565-draw-mmap-wc:
- shard-tglb: [PASS][23] -> [DMESG-WARN][24] ([i915#1982]) +4 similar issues
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-tglb3/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-tglb5/igt@[email protected]
* igt@kms_plane_scaling@pipe-a-scaler-with-clipping-clamping:
- shard-iclb: [PASS][25] -> [DMESG-WARN][26] ([i915#1982]) +2 similar issues
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-iclb7/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-iclb3/igt@[email protected]
* igt@kms_prop_blob@blob-prop-validate:
- shard-snb: [PASS][27] -> [TIMEOUT][28] ([i915#1958] / [i915#2119])
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-snb5/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-snb6/igt@[email protected]
* igt@kms_psr@psr2_cursor_plane_onoff:
- shard-iclb: [PASS][29] -> [SKIP][30] ([fdo#109441]) +2 similar issues
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-iclb2/igt@kms_psr@psr2_cursor_plane_onoff.html
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-iclb8/igt@kms_psr@psr2_cursor_plane_onoff.html
#### Possible fixes ####
* igt@core_setmaster@master-drop-set-user:
- shard-iclb: [FAIL][31] -> [PASS][32]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-iclb5/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-iclb2/igt@[email protected]
- shard-kbl: [FAIL][33] -> [PASS][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-kbl2/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-kbl1/igt@[email protected]
- shard-snb: [FAIL][35] -> [PASS][36]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-snb6/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-snb5/igt@[email protected]
- shard-tglb: [FAIL][37] -> [PASS][38]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-tglb5/igt@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-tglb5/igt@[email protected]
- shard-apl: [FAIL][39] ([i915#1635]) -> [PASS][40]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-apl4/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-apl2/igt@[email protected]
- shard-glk: [FAIL][41] -> [PASS][42]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-glk5/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-glk3/igt@[email protected]
- shard-hsw: [FAIL][43] -> [PASS][44]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-hsw6/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-hsw2/igt@[email protected]
* igt@gem_ctx_isolation@preservation-s3@vcs0:
- shard-kbl: [DMESG-WARN][45] ([i915#180]) -> [PASS][46] +3 similar issues
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-kbl1/igt@gem_ctx_isolation@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-kbl1/igt@gem_ctx_isolation@[email protected]
* igt@gem_exec_whisper@basic-queues-priority-all:
- shard-glk: [DMESG-WARN][47] ([i915#118] / [i915#95]) -> [PASS][48]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-glk4/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-glk2/igt@[email protected]
* igt@kms_addfb_basic@bo-too-small:
- shard-hsw: [TIMEOUT][49] ([i915#1958] / [i915#2119]) -> [PASS][50] +2 similar issues
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-hsw1/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-hsw4/igt@[email protected]
* igt@kms_cursor_edge_walk@pipe-b-128x128-left-edge:
- shard-glk: [DMESG-WARN][51] ([i915#1982]) -> [PASS][52]
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-glk6/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-glk2/igt@[email protected]
* igt@kms_cursor_edge_walk@pipe-b-256x256-top-edge:
- shard-snb: [TIMEOUT][53] ([i915#1958] / [i915#2119]) -> [PASS][54] +3 similar issues
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-snb5/igt@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-snb2/igt@[email protected]
* igt@kms_flip@2x-flip-vs-absolute-wf_vblank-interruptible@ab-vga1-hdmi-a1:
- shard-hsw: [DMESG-WARN][55] ([i915#1982]) -> [PASS][56]
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-hsw6/igt@kms_flip@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-hsw4/igt@kms_flip@[email protected]
* igt@kms_flip@flip-vs-suspend-interruptible@b-hdmi-a1:
- shard-hsw: [INCOMPLETE][57] ([i915#2055]) -> [PASS][58]
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-hsw1/igt@kms_flip@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-hsw1/igt@kms_flip@[email protected]
* igt@kms_frontbuffer_tracking@fbc-modesetfrombusy:
- shard-kbl: [DMESG-WARN][59] ([i915#1982]) -> [PASS][60]
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-kbl6/igt@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-kbl6/igt@[email protected]
* igt@kms_frontbuffer_tracking@psr-1p-primscrn-cur-indfb-draw-render:
- shard-tglb: [DMESG-WARN][61] ([i915#1982]) -> [PASS][62] +3 similar issues
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-tglb5/igt@kms_frontbuffer_tracking@psr-1p-primscrn-cur-indfb-draw-render.html
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-tglb1/igt@kms_frontbuffer_tracking@psr-1p-primscrn-cur-indfb-draw-render.html
- shard-iclb: [DMESG-WARN][63] ([i915#1982]) -> [PASS][64]
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-iclb8/igt@kms_frontbuffer_tracking@psr-1p-primscrn-cur-indfb-draw-render.html
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-iclb3/igt@kms_frontbuffer_tracking@psr-1p-primscrn-cur-indfb-draw-render.html
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
- shard-kbl: [INCOMPLETE][65] ([i915#155]) -> [PASS][66] +1 similar issue
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-kbl3/igt@[email protected]
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-kbl6/igt@[email protected]
* igt@kms_psr2_su@page_flip:
- shard-iclb: [SKIP][67] ([fdo#109642] / [fdo#111068]) -> [PASS][68]
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-iclb4/igt@kms_psr2_su@page_flip.html
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-iclb2/igt@kms_psr2_su@page_flip.html
* igt@kms_psr@psr2_primary_page_flip:
- shard-iclb: [SKIP][69] ([fdo#109441]) -> [PASS][70]
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-iclb5/igt@kms_psr@psr2_primary_page_flip.html
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-iclb2/igt@kms_psr@psr2_primary_page_flip.html
* igt@kms_vblank@pipe-c-query-forked-busy:
- shard-apl: [DMESG-WARN][71] ([i915#1635] / [i915#1982]) -> [PASS][72] +1 similar issue
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-apl3/igt@[email protected]
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-apl7/igt@[email protected]
* igt@perf@blocking-parameterized:
- shard-iclb: [FAIL][73] ([i915#1542]) -> [PASS][74]
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-iclb2/igt@[email protected]
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-iclb2/igt@[email protected]
#### Warnings ####
* igt@gem_ctx_persistence@engines-mixed-process:
- shard-snb: [SKIP][75] ([fdo#109271] / [i915#1099]) -> [TIMEOUT][76] ([i915#1958] / [i915#2119])
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-snb5/igt@[email protected]
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-snb6/igt@[email protected]
* igt@kms_content_protection@atomic:
- shard-kbl: [TIMEOUT][77] ([i915#1319] / [i915#2119]) -> [TIMEOUT][78] ([i915#1319] / [i915#1958] / [i915#2119])
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-kbl1/igt@[email protected]
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-kbl4/igt@[email protected]
* igt@kms_cursor_crc@pipe-c-cursor-512x512-random:
- shard-snb: [TIMEOUT][79] ([i915#1958] / [i915#2119]) -> [SKIP][80] ([fdo#109271])
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-snb5/igt@[email protected]
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-snb5/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-shrfb-pgflip-blt:
- shard-hsw: [TIMEOUT][81] ([i915#1958] / [i915#2119]) -> [SKIP][82] ([fdo#109271]) +1 similar issue
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-hsw1/igt@[email protected]
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-hsw4/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-cur-indfb-draw-blt:
- shard-hsw: [SKIP][83] ([fdo#109271]) -> [TIMEOUT][84] ([i915#1958] / [i915#2119]) +3 similar issues
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-hsw8/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-cur-indfb-draw-blt.html
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-hsw1/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-cur-indfb-draw-blt.html
* igt@kms_frontbuffer_tracking@psr-1p-primscrn-cur-indfb-draw-mmap-wc:
- shard-snb: [SKIP][85] ([fdo#109271]) -> [TIMEOUT][86] ([i915#1958] / [i915#2119]) +3 similar issues
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5752/shard-snb4/igt@kms_frontbuffer_tracking@psr-1p-primscrn-cur-indfb-draw-mmap-wc.html
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/shard-snb6/igt@kms_frontbuffer_tracking@psr-1p-primscrn-cur-indfb-draw-mmap-wc.html
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#109642]: https://bugs.freedesktop.org/show_bug.cgi?id=109642
[fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
[i915#1099]: https://gitlab.freedesktop.org/drm/intel/issues/1099
[i915#118]: https://gitlab.freedesktop.org/drm/intel/issues/118
[i915#1319]: https://gitlab.freedesktop.org/drm/intel/issues/1319
[i915#1436]: https://gitlab.freedesktop.org/drm/intel/issues/1436
[i915#1542]: https://gitlab.freedesktop.org/drm/intel/issues/1542
[i915#155]: https://gitlab.freedesktop.org/drm/intel/issues/155
[i915#1635]: https://gitlab.freedesktop.org/drm/intel/issues/1635
[i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
[i915#1930]: https://gitlab.freedesktop.org/drm/intel/issues/1930
[i915#1958]: https://gitlab.freedesktop.org/drm/intel/issues/1958
[i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
[i915#2055]: https://gitlab.freedesktop.org/drm/intel/issues/2055
[i915#2119]: https://gitlab.freedesktop.org/drm/intel/issues/2119
[i915#454]: https://gitlab.freedesktop.org/drm/intel/issues/454
[i915#716]: https://gitlab.freedesktop.org/drm/intel/issues/716
[i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
Participating hosts (8 -> 8)
------------------------------
No changes in participating hosts
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_5752 -> IGTPW_4826
CI-20190529: 20190529
CI_DRM_8815: 521846d50ed323d4dcb0ffafa63e34528b0a4996 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_4826: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/index.html
IGT_5752: 3ecf9d88803a686354394ea60164551646235273 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4826/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev