libxc/x86: avoid overflow in CPUID APIC ID adjustments
PATCH v2 1/1 libxc/x86: avoid overflow in CPUID APIC ID adjustments
Recent AMD processors may report up to 128 logical processors in CPUID leaf 1. Doubling this value produces 0 (which OSes sincerely dislike), as the respective field is only 8 bits wide. Suppress doubling the value (and its leaf 0x80000008 counterpart) in such a case.
Note that while there's a similar overflow in intel_xc_cpuid_policy(), that one is being left alone for now.
Note further that while it was considered to suppress the multiplication by 2 altogether if the host topology already provides at least one bit of thread ID within APIC IDs, it was decided to avoid more change here than really needed at this point.
Also zap leaf 4 (and at the same time leaf 2) EDX output for AMD, as it should have been from the beginning.
---
v2: Drop use of physinfo. Drop Intel-only leaf 4 change. Increment
ApicIdCoreSize only when doubling NumberOfCores.
tools/libxc/xc_cpuid_x86.c +20 -7
@@ -385,7 +385,7 @@ static void amd_xc_cpuid_policy(const st {case 0x00000002 :case 0x00000004 : - regs[0 ] = regs[1 ] = regs[2 ] =0 ; + regs[0 ] = regs[1 ] = regs[2 ] = regs[3 ] =0 ;break ;case 0x80000000 :
@@ -395,11 +395,20 @@ static void amd_xc_cpuid_policy(const stcase 0x80000008 :/* -* ECX[15:12] is ApicIdCoreSize: ECX[7:0] is NumberOfCores (minus one). -* Update to reflect vLAPIC_ID = vCPU_ID * 2. +* ECX[15:12] is ApicIdCoreSize. +* ECX[7:0] is NumberOfCores (minus one). +* Update to reflect vLAPIC_ID = vCPU_ID * 2. But make sure to avoid +* - overflow, +* - going out of sync with leaf 1 EBX[23:16], +* - incrementing ApicIdCoreSize when it's zero (which changes the +* meaning of bits 7:0). */ - regs[2 ] = ((regs[2 ] + (1u <<12 )) &0xf000u ) | - ((regs[2 ] &0xffu ) <<1 ) |1u ; +if ( (regs[2 ] &0x7fu ) <0x7fu ) + { +if ( (regs[2 ] &0xf000u ) && (regs[2 ] &0xf000u ) !=0xf000u ) + regs[2 ] = ((regs[2 ] +0x1000u ) &0xf000u ) | (regs[2 ] &0xffu ); + regs[2 ] = (regs[2 ] &0xf000u ) | ((regs[2 ] &0x7fu ) <<1 ) |1u ; + }break ;case 0x8000000a : {
@@ -478,9 +487,13 @@ static void xc_cpuid_hvm_policy(const stcase 0x00000001 :/* * EBX[23:16] is Maximum Logical Processors Per Package. -* Update to reflect vLAPIC_ID = vCPU_ID * 2. +* Update to reflect vLAPIC_ID = vCPU_ID * 2, but make sure to avoid +* overflow. */ - regs[1 ] = (regs[1 ] &0x0000ffffu ) | ((regs[1 ] &0x007f0000u ) <<1 ); +if ( !(regs[1 ] &0x00800000u ) ) + regs[1 ] = (regs[1 ] &0x0000ffffu ) | ((regs[1 ] &0x007f0000u ) <<1 ); +else + regs[1 ] &=0x00ffffffu ; regs[2 ] = info->featureset[featureword_of (X86_FEATURE_SSE3 )]; regs[3] = (info->featureset[featureword_of(X86_FEATURE_FPU)] |
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 5 lines · Jan Beulich
Recent AMD processors may report up to 128 logical processors in CPUID leaf 1. Doubling this value produces 0 (which OSes sincerely dislike), as the respective field is only 8 bits wide. Suppress doubling the value (and its leaf
0x80000008counterpart) in such a case.
Quoted 7 lines
Note that while there's a similar overflow in
intel_xc_cpuid_policy(), that one is being left alone for now.Note further that while it was considered to suppress the multiplication by 2 altogether if the host topology already provides at least one bit of thread ID within APIC IDs, it was decided to avoid more change here than really needed at this point.
Given this I've just changed the title to "avoid certain overflows in CPUID APIC ID adjustments".
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 13 lines · Jan Beulich
Recent AMD processors may report up to 128 logical processors in CPUID leaf 1. Doubling this value produces 0 (which OSes sincerely dislike), as the respective field is only 8 bits wide. Suppress doubling the value (and its leaf
0x80000008counterpart) in such a case.Note that while there's a similar overflow in
intel_xc_cpuid_policy(), that one is being left alone for now.Note further that while it was considered to suppress the multiplication by 2 altogether if the host topology already provides at least one bit of thread ID within APIC IDs, it was decided to avoid more change here than really needed at this point.
Quoted 7 lines
Also zap leaf 4 (and at the same time leaf 2) EDX output for AMD, as it should have been from the beginning.
Signed-off-by Jan Beulich <[email protected]>---
v2: Drop use of physinfo. Drop Intel-only leaf 4 change. Increment
ApicIdCoreSize only when doubling NumberOfCores.
Thinking about it some more, dropping the leaf 4 change seems at least somewhat risky to me. This being just a 6-bit field (and effectively already saturating in a way, at least when power-of-two maximum core counts are involved), and hence there being 2 bits of "playing room" between this and the involved leaf 1 field, the calculation there not getting adjusted is still a latent risk imo with guest side calculations like this one
smp_num_siblings = smp_num_siblings / c->x86_max_cores;
found in basically all versions of Linux (where certain functions, e.g. apic_id_is_primary_thread(), won't cope with smp_num_siblings ending up as zero, while others, e.g. topology_smt_supported(), do).
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 29 lines · Jan Beulich
Quoted 13 lines · Jan Beulich
Recent AMD processors may report up to 128 logical processors in CPUID leaf 1. Doubling this value produces 0 (which OSes sincerely dislike), as the respective field is only 8 bits wide. Suppress doubling the value (and its leaf
0x80000008counterpart) in such a case.Note that while there's a similar overflow in
intel_xc_cpuid_policy(), that one is being left alone for now.Note further that while it was considered to suppress the multiplication by 2 altogether if the host topology already provides at least one bit of thread ID within APIC IDs, it was decided to avoid more change here than really needed at this point.
Quoted 7 lines
Also zap leaf 4 (and at the same time leaf 2) EDX output for AMD, as it should have been from the beginning.
Signed-off-by Jan Beulich <[email protected]>---
v2: Drop use of physinfo. Drop Intel-only leaf 4 change. Increment
ApicIdCoreSize only when doubling NumberOfCores.Thinking about it some more, dropping the leaf 4 change seems at least somewhat risky to me. This being just a 6-bit field (and effectively already saturating in a way, at least when power-of-two maximum core counts are involved), and hence there being 2 bits of "playing room" between this and the involved leaf 1 field, the calculation there not getting adjusted is still a latent risk imo with guest side calculations like this one
Quoted 5 lines
smp_num_siblings = smp_num_siblings / c->x86_max_cores;found in basically all versions of Linux (where certain functions, e.g.
apic_id_is_primary_thread(), won't cope withsmp_num_siblingsending up as zero, while others, e.g.topology_smt_supported(), do).
None of these adjustments are correct. The topology should be constructed from first principles.
What matters is having as few alterations to the algorithm as necessary, until we can fix the many toolstack side issues.
~Andrew
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 30 lines · Andrew Cooper
Quoted 29 lines · Jan Beulich
Quoted 13 lines · Jan Beulich
Recent AMD processors may report up to 128 logical processors in CPUID leaf 1. Doubling this value produces 0 (which OSes sincerely dislike), as the respective field is only 8 bits wide. Suppress doubling the value (and its leaf
0x80000008counterpart) in such a case.Note that while there's a similar overflow in
intel_xc_cpuid_policy(), that one is being left alone for now.Note further that while it was considered to suppress the multiplication by 2 altogether if the host topology already provides at least one bit of thread ID within APIC IDs, it was decided to avoid more change here than really needed at this point.
Quoted 7 lines
Also zap leaf 4 (and at the same time leaf 2) EDX output for AMD, as it should have been from the beginning.
Signed-off-by Jan Beulich <[email protected]>---
v2: Drop use of physinfo. Drop Intel-only leaf 4 change. Increment
ApicIdCoreSize only when doubling NumberOfCores.Thinking about it some more, dropping the leaf 4 change seems at least somewhat risky to me. This being just a 6-bit field (and effectively already saturating in a way, at least when power-of-two maximum core counts are involved), and hence there being 2 bits of "playing room" between this and the involved leaf 1 field, the calculation there not getting adjusted is still a latent risk imo with guest side calculations like this one
Quoted 8 lines
Quoted 5 lines
smp_num_siblings = smp_num_siblings / c->x86_max_cores;found in basically all versions of Linux (where certain functions, e.g.
apic_id_is_primary_thread(), won't cope withsmp_num_siblingsending up as zero, while others, e.g.topology_smt_supported(), do).None of these adjustments are correct. The topology should be constructed from first principles.
Fully agree.
Quoted 2 lines
What matters is having as few alterations to the algorithm as necessary, until we can fix the many toolstack side issues.
But if an alteration is needed, we should also try to limit the risk of it introducing regressions elsewhere. I wrote the above reply simply because I'm uncertain whether the larger risk is to leave leaf 4 handling unchanged, or to change it along the lines of the other two adjustments done here.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 13 lines · Jan Beulich
Recent AMD processors may report up to 128 logical processors in CPUID leaf 1. Doubling this value produces 0 (which OSes sincerely dislike), as the respective field is only 8 bits wide. Suppress doubling the value (and its leaf
0x80000008counterpart) in such a case.Note that while there's a similar overflow in
intel_xc_cpuid_policy(), that one is being left alone for now.Note further that while it was considered to suppress the multiplication by 2 altogether if the host topology already provides at least one bit of thread ID within APIC IDs, it was decided to avoid more change here than really needed at this point.
Quoted 4 lines
Also zap leaf 4 (and at the same time leaf 2) EDX output for AMD, as it should have been from the beginning.
Signed-off-by Jan Beulich <[email protected]>
I'm going to defer this patch to Andrew.
Wei.
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 13 lines · Jan Beulich
Recent AMD processors may report up to 128 logical processors in CPUID leaf 1. Doubling this value produces 0 (which OSes sincerely dislike), as the respective field is only 8 bits wide. Suppress doubling the value (and its leaf
0x80000008counterpart) in such a case.Note that while there's a similar overflow in
intel_xc_cpuid_policy(), that one is being left alone for now.Note further that while it was considered to suppress the multiplication by 2 altogether if the host topology already provides at least one bit of thread ID within APIC IDs, it was decided to avoid more change here than really needed at this point.
Quoted 4 lines
Also zap leaf 4 (and at the same time leaf 2) EDX output for AMD, as it should have been from the beginning.
Signed-off-by Jan Beulich <[email protected]>
I'll rebase my CPUID series over this change.
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 7 lines · Jan Beulich
tools/libxc/xc_cpuid_x86.c +1
-2@@ -395,11 +395,20 @@ static void amd_xc_cpuid_policy(const stcase 0x80000008 :/* -* ECX[15:12] is ApicIdCoreSize: ECX[7:0] is NumberOfCores (minus one). -* Update to reflect vLAPIC_ID = vCPU_ID * 2. +* ECX[15:12] is ApicIdCoreSize.
tools/libxc/xc_cpuid_x86.c static void amd_xc_cpuid_policy(const st · line 406
Quoted 10 lines
tools/libxc/xc_cpuid_x86.c +7
-2+* ECX[7:0] is NumberOfCores (minus one). +* Update to reflect vLAPIC_ID = vCPU_ID * 2. But make sure to avoid +* - overflow, +* - going out of sync with leaf 1 EBX[23:16], +* - incrementing ApicIdCoreSize when it's zero (which changes the +* meaning of bits 7:0). */ - regs[2 ] = ((regs[2 ] + (1u <<12 )) &0xf000u ) | - ((regs[2 ] &0xffu ) <<1 ) |1u ; +if ( (regs[2 ] &0x7fu ) <0x7fu )
In attempting to rebase my series, there is a bug here. It should be & 0xff otherwise the top bit isn't included in the comparison, and a value of 128 will still be doubled.
~Andrew
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 14 lines · Andrew Cooper
Quoted 13 lines · Jan Beulich
tools/libxc/xc_cpuid_x86.c +7
-2@@ -395,11 +395,20 @@ static void amd_xc_cpuid_policy(const stcase 0x80000008 :/* -* ECX[15:12] is ApicIdCoreSize: ECX[7:0] is NumberOfCores (minus one). -* Update to reflect vLAPIC_ID = vCPU_ID * 2. +* ECX[15:12] is ApicIdCoreSize. +* ECX[7:0] is NumberOfCores (minus one). +* Update to reflect vLAPIC_ID = vCPU_ID * 2. But make sure to avoid +* - overflow, +* - going out of sync with leaf 1 EBX[23:16], +* - incrementing ApicIdCoreSize when it's zero (which changes the +* meaning of bits 7:0).
Quoted 8 lines
tools/libxc/xc_cpuid_x86.c static void amd_xc_cpuid_policy(const st · line 406
Quoted 4 lines
tools/libxc/xc_cpuid_x86.c +1
-2*/ - regs[2 ] = ((regs[2 ] + (1u <<12 )) &0xf000u ) | - ((regs[2 ] &0xffu ) <<1 ) |1u ; +if ( (regs[2 ] &0x7fu ) <0x7fu )In attempting to rebase my series, there is a bug here. It should be &
0xffotherwise the top bit isn't included in the comparison, and a value of 128 will still be doubled.
Oh, indeed, thanks for spotting. Will send a fixup patch once in the office, unless you did so already.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel