docs: add docs about use of automatic cleanup functions
v3 cover docs: add docs about use of automatic cleanup functions
This is ostensibly about adding docs for the g_autofree/g_autoptr macros. As part of doing that, however, the existing HACKING doc is merged into the CODING_STYLE doc and the text is converted to rst with a table of contents.
Changed in v3:
- Make checkpatch.pl aware of README.rst rename
Changed in v2:
- Use RST instead of markdown
- Also convert README file
- Group sections better
- Remove GMutexLocker example
Daniel P. Berrangé (4):
docs: convert README, CODING_STYLE and HACKING to RST syntax
docs: merge HACKING.rst contents into CODING_STYLE.rst
docs: document use of automatic cleanup functions in glib
docs: split the CODING_STYLE doc into distinct groups
CODING_STYLE | 216 -------------- CODING_STYLE.rst | 641 ++++++++++++++++++++++++++++++++++++++++++ HACKING | 257 ----------------- README => README.rst | 47 ++-- scripts/checkpatch.pl | 2 +- 5 files changed, 671 insertions(+), 492 deletions(-) delete mode 100644 CODING_STYLE create mode 100644 CODING_STYLE.rst delete mode 100644 HACKING rename README => README.rst (84%)
Signature · 1 line
2.21.0
PATCH v3 1/4 docs: convert README, CODING_STYLE and HACKING to RST syntax
--- CODING_STYLE => CODING_STYLE.rst | 121 +++++++++++++++++++----------- HACKING => HACKING.rst | 123 +++++++++++++++++++++---------- README => README.rst | 47 +++++++----- scripts/checkpatch.pl | 2 +- 4 files changed, 191 insertions(+), 102 deletions(-) rename CODING_STYLE => CODING_STYLE.rst (72%) rename HACKING => HACKING.rst (79%) rename README => README.rst (84%)
CODING_STYLE.rst renamed from CODING_STYLE +78 -43
@@ -1,10 +1,14 @@ +================= QEMU Coding Style ================= +.. contents:: Table of Contents + Please use the script checkpatch.pl in the scripts directory to check patches before submitting. -1. Whitespace +Whitespace +========== Of course, the most important aspect in any coding style is whitespace. Crusty old coders who have trouble spotting the glasses on their noses
@@ -16,26 +20,27 @@ QEMU indents are four spaces. Tabs are never used, except in Makefiles where they have been irreversibly coded into the syntax. Spaces of course are superior to tabs because: - - You have just one way to specify whitespace, not two. Ambiguity breeds - mistakes. - - The confusion surrounding 'use tabs to indent, spaces to justify' is gone. - - Tab indents push your code to the right, making your screen seriously - unbalanced. - - Tabs will be rendered incorrectly on editors who are misconfigured not - to use tab stops of eight positions. - - Tabs are rendered badly in patches, causing off-by-one errors in almost - every line. - - It is the QEMU coding style. +* You have just one way to specify whitespace, not two. Ambiguity breeds + mistakes. +* The confusion surrounding 'use tabs to indent, spaces to justify' is gone. +* Tab indents push your code to the right, making your screen seriously + unbalanced. +* Tabs will be rendered incorrectly on editors who are misconfigured not + to use tab stops of eight positions. +* Tabs are rendered badly in patches, causing off-by-one errors in almost + every line. +* It is the QEMU coding style. Do not leave whitespace dangling off the ends of lines. -1.1 Multiline Indent +Multiline Indent +---------------- There are several places where indent is necessary: - - if/else - - while/for - - function definition & call +* if/else +* while/for +* function definition & call When breaking up a long line to fit within line width, we need a proper indent for the following lines.
@@ -45,6 +50,8 @@ opening parenthesis of the first. For example: +.. code-block:: c + if (a == 1 && b == 2) {
@@ -53,12 +60,13 @@ For example: In case of function, there are several variants: - * 4 spaces indent from the beginning - * align the secondary lines just after the opening parenthesis of the - first +* 4 spaces indent from the beginning +* align the secondary lines just after the opening parenthesis of the first For example: +.. code-block:: c + do_something(x, y, z);
@@ -68,7 +76,8 @@ For example: do_something(x, do_another(y, z)); -2. Line width +Line width +========== Lines should be 80 characters; try not to make them longer.
@@ -77,16 +86,18 @@ that use long function or symbol names. Even in that case, do not make lines much longer than 80 characters. Rationale: - - Some people like to tile their 24" screens with a 6x4 matrix of 80x24 - xterms and use vi in all of them. The best way to punish them is to - let them keep doing it. - - Code and especially patches is much more readable if limited to a sane - line length. Eighty is traditional. - - The four-space indentation makes the most common excuse ("But look - at all that white space on the left!") moot. - - It is the QEMU coding style. -3. Naming +* Some people like to tile their 24" screens with a 6x4 matrix of 80x24 + xterms and use vi in all of them. The best way to punish them is to + let them keep doing it. +* Code and especially patches is much more readable if limited to a sane + line length. Eighty is traditional. +* The four-space indentation makes the most common excuse ("But look + at all that white space on the left!") moot. +* It is the QEMU coding style. + +Naming +====== Variables are lower_case_with_underscores; easy to type and read. Structured type names are in CamelCase; harder to type but standing out. Enum type
@@ -95,10 +106,11 @@ names are lower_case_with_underscores_ending_with_a_t, like the POSIX uint64_t and family. Note that this last convention contradicts POSIX and is therefore likely to be changed. -When wrapping standard library functions, use the prefix qemu_ to alert +When wrapping standard library functions, use the prefix ``qemu_`` to alert readers that they are seeing a wrapped version; otherwise avoid this prefix. -4. Block structure +Block structure +=============== Every indented statement is braced; even if the block contains just one statement. The opening brace is on the line that contains the control
@@ -106,6 +118,8 @@ flow statement that introduces the new block; the closing brace is on the same line as the else keyword, or on a line by itself if there is no else keyword. Example: +.. code-block:: c + if (a == 5) { printf("a was 5.\n"); } else if (a == 6) {
@@ -121,6 +135,8 @@ statement. An exception is the opening brace for a function; for reasons of tradition and clarity it comes on a line by itself: +.. code-block:: c + void a_function(void) { do_something();
@@ -130,7 +146,8 @@ Rationale: a consistent (except for functions...) bracing style reduces ambiguity and avoids needless churn when lines are added or removed. Furthermore, it is the QEMU coding style. -5. Declarations +Declarations +============ Mixed declarations (interleaving statements and declarations within blocks) are generally not allowed; declarations should be at the beginning
@@ -142,11 +159,14 @@ be placed at the top of the block even if there are statements above. On the other hand, however, it's often best to move that #ifdef/#ifndef block to a separate function altogether. -6. Conditional statements +Conditional statements +====================== When comparing a variable for (in)equality with a constant, list the constant on the right, as in: +.. code-block:: c + if (a == 1) { /* Reads like: "If a equals 1" */ do_something();
@@ -156,19 +176,24 @@ Rationale: Yoda conditions (as in 'if (1 == a)') are awkward to read. Besides, good compilers already warn users when '==' is mis-typed as '=', even when the constant is on the right. -7. Comment style +Comment style +============= -We use traditional C-style /* */ comments and avoid // comments. +We use traditional C-style /``*`` ``*``/ comments and avoid // comments. Rationale: The // form is valid in C99, so this is purely a matter of consistency of style. The checkpatch script will warn you about this. Multiline comment blocks should have a row of stars on the left, -and the initial /* and terminating */ both on their own lines: +and the initial /``*`` and terminating ``*``/ both on their own lines: + +.. code-block:: c + /* * like * this */ + This is the same format required by the Linux kernel coding style. (Some of the existing comments in the codebase use the GNU Coding
@@ -180,24 +205,32 @@ comment anyway.) Rationale: Consistency, and ease of visually picking out a multiline comment from the surrounding code. -8. trace-events style +trace-events style +================== -8.1 0x prefix +0x prefix +--------- In trace-events files, use a '0x' prefix to specify hex numbers, as in: -some_trace(unsigned x, uint64_t y) "x 0x%x y 0x" PRIx64 +.. code-block:: + + some_trace(unsigned x, uint64_t y) "x 0x%x y 0x" PRIx64 An exception is made for groups of numbers that are hexadecimal by convention and separated by the symbols '.', '/', ':', or ' ' (such as PCI bus id): -another_trace(int cssid, int ssid, int dev_num) "bus id: %x.%x.%04x" +.. code-block:: + + another_trace(int cssid, int ssid, int dev_num) "bus id: %x.%x.%04x" However, you can use '0x' for such groups if you want. Anyway, be sure that it is obvious that numbers are in hex, ex.: -data_dump(uint8_t c1, uint8_t c2, uint8_t c3) "bytes (in hex): %02x %02x %02x" +.. code-block:: + + data_dump(uint8_t c1, uint8_t c2, uint8_t c3) "bytes (in hex): %02x %02x %02x" Rationale: hex numbers are hard to read in logs when there is no 0x prefix, especially when (occasionally) the representation doesn't contain any letters
@@ -205,12 +238,14 @@ and especially in one line with other decimal numbers. Number groups are allowed to not use '0x' because for some things notations like %x.%x.%x are used not only in Qemu. Also dumping raw data bytes with '0x' is less readable. -8.2 '#' printf flag +'#' printf flag +--------------- Do not use printf flag '#', like '%#x'. Rationale: there are two ways to add a '0x' prefix to printed number: '0x%...' and '%#...'. For consistency the only one way should be used. Arguments for '0x%' are: - - it is more popular - - '%#' omits the 0x for the value 0 which makes output inconsistent + +* it is more popular +* '%#' omits the 0x for the value 0 which makes output inconsistent
HACKING.rst renamed from HACKING +83 -40
245 lines not on this page · raw message
README.rst renamed from README +29 -18
116 lines not on this page · raw message
scripts/checkpatch.pl +1 -1
@@ -461,7 +461,7 @@ sub top_of_kernel_tree { my @tree_check = ( "COPYING", "MAINTAINERS", "Makefile", - "README", "docs", "VERSION", + "README.rst", "docs", "VERSION", "vl.c" );
Signature · 1 line
2.21.0
Re: [Qemu-devel] [PATCH v3 1/4] docs: convert README, CODING_STYLE and HACKING to RST syntax
Quoted 10 lines · Daniel P. Berrangé
Signed-off-by Daniel P. Berrangé <[email protected]>--- CODING_STYLE => CODING_STYLE.rst | 121 +++++++++++++++++++----------- HACKING => HACKING.rst | 123 +++++++++++++++++++++---------- README => README.rst | 47 +++++++----- scripts/checkpatch.pl | 2 +- 4 files changed, 191 insertions(+), 102 deletions(-) rename CODING_STYLE => CODING_STYLE.rst (72%) rename HACKING => HACKING.rst (79%) rename README => README.rst (84%)
This change broke the NSIS build:
(cd /tmp/qemu-nsis; \
for i in qemu-system-*.exe; do \
arch=${i%.exe}; \
arch=${arch#qemu-system-}; \
echo Section \"$arch\" Section_$arch; \
echo SetOutPath \"\$INSTDIR\"; \
echo File \"\${BINDIR}\\$i\"; \
echo SectionEnd; \
done \
) >/tmp/qemu-nsis/system-emulations.nsh
makensis -V2 -NOCD \
-DCONFIG_DOCUMENTATION="y" \
-DCONFIG_GTK="y" \
-DBINDIR="/tmp/qemu-nsis" \
\
-DSRCDIR="/tmp/qemu-test/src" \
-DOUTFILE="qemu-setup-4.1.50.exe" \
-DDISPLAYVERSION="4.1.50" \
/tmp/qemu-test/src/qemu.nsiFile: "/tmp/qemu-test/src\README" -> no files found.
Usage: File [/nonfatal] [/a] ([/r] [/x filespec [...]] filespec [...] |
/oname=outfile one_file_only)
Error in script "/tmp/qemu-test/src/qemu.nsi" on line 122 -- aborting creation process
make: *** [Makefile:1083: qemu-setup-4.1.50.exe] Error 1
I'll send a fix.
Re: [Qemu-devel] [PATCH v3 1/4] docs: convert README, CODING_STYLE and HACKING to RST syntax
Quoted 33 lines · Philippe Mathieu-Daudé
Quoted 10 lines · Daniel P. Berrangé
Signed-off-by Daniel P. Berrangé <[email protected]>--- CODING_STYLE => CODING_STYLE.rst | 121 +++++++++++++++++++----------- HACKING => HACKING.rst | 123 +++++++++++++++++++++---------- README => README.rst | 47 +++++++----- scripts/checkpatch.pl | 2 +- 4 files changed, 191 insertions(+), 102 deletions(-) rename CODING_STYLE => CODING_STYLE.rst (72%) rename HACKING => HACKING.rst (79%) rename README => README.rst (84%)This change broke the NSIS build:
(cd /tmp/qemu-nsis; \ for i in qemu-system-*.exe; do \ arch=${i%.exe}; \ arch=${arch#qemu-system-}; \ echo Section \"$arch\" Section_$arch; \ echo SetOutPath \"\$INSTDIR\"; \ echo File \"\${BINDIR}\\$i\"; \ echo SectionEnd; \ done \ ) >/tmp/qemu-nsis/system-emulations.nsh makensis -V2 -NOCD \ -DCONFIG_DOCUMENTATION="y" \ -DCONFIG_GTK="y" \ -DBINDIR="/tmp/qemu-nsis" \ \ -DSRCDIR="/tmp/qemu-test/src" \ -DOUTFILE="qemu-setup-4.1.50.exe" \ -DDISPLAYVERSION="4.1.50" \ /tmp/qemu-test/src/qemu.nsi
Quoted 8 lines
File: "/tmp/qemu-test/src\README" -> no files found.
Usage: File [/nonfatal] [/a] ([/r] [/x filespec [...]] filespec [...] |
/oname=outfileone_file_only)
Error in script "/tmp/qemu-test/src/qemu.nsi" on line 122 -- aborting creation process
make: *** [Makefile:1083: qemu-setup-4.1.50.exe] Error 1I'll send a fix.
Doh. If we care about NSIS, we really need to have it being tested by some part of our CI system, and by pre-merge build tests.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Re: [Qemu-devel] [PATCH v3 1/4] docs: convert README, CODING_STYLE and HACKING to RST syntax
Quoted 41 lines · Daniel P. Berrangé
Quoted 40 lines · Philippe Mathieu-Daudé
Quoted 10 lines · Daniel P. Berrangé
Signed-off-by Daniel P. Berrangé <[email protected]>--- CODING_STYLE => CODING_STYLE.rst | 121 +++++++++++++++++++----------- HACKING => HACKING.rst | 123 +++++++++++++++++++++---------- README => README.rst | 47 +++++++----- scripts/checkpatch.pl | 2 +- 4 files changed, 191 insertions(+), 102 deletions(-) rename CODING_STYLE => CODING_STYLE.rst (72%) rename HACKING => HACKING.rst (79%) rename README => README.rst (84%)This change broke the NSIS build:
(cd /tmp/qemu-nsis; \ for i in qemu-system-*.exe; do \ arch=${i%.exe}; \ arch=${arch#qemu-system-}; \ echo Section \"$arch\" Section_$arch; \ echo SetOutPath \"\$INSTDIR\"; \ echo File \"\${BINDIR}\\$i\"; \ echo SectionEnd; \ done \ ) >/tmp/qemu-nsis/system-emulations.nsh makensis -V2 -NOCD \ -DCONFIG_DOCUMENTATION="y" \ -DCONFIG_GTK="y" \ -DBINDIR="/tmp/qemu-nsis" \ \ -DSRCDIR="/tmp/qemu-test/src" \ -DOUTFILE="qemu-setup-4.1.50.exe" \ -DDISPLAYVERSION="4.1.50" \ /tmp/qemu-test/src/qemu.nsiFile: "/tmp/qemu-test/src\README" -> no files found.
Usage: File [/nonfatal] [/a] ([/r] [/x filespec [...]] filespec [...] |
/oname=outfileone_file_only)
Error in script "/tmp/qemu-test/src/qemu.nsi" on line 122 -- aborting creation process
make: *** [Makefile:1083: qemu-setup-4.1.50.exe] Error 1
Quoted 4 lines
Quoted 1 line
I'll send a fix.
Doh. If we care about NSIS, we really need to have it being tested by some part of our CI system, and by pre-merge build tests.
I believe Stefan Weil does, since he regularly sends fixes or opens LP bugs during freeze time.
We do build nsis/win32 with CI, but for some reason patchew was down.
I'm not sure we should duplicate the build on another CI, we should rather setup something to watch patchew and warn us when it goes down.
Re: [Qemu-devel] [PATCH v3 1/4] docs: convert README, CODING_STYLE and HACKING to RST syntax
Quoted 10 lines · Philippe Mathieu-Daudé
Quoted 2 lines
Doh. If we care about NSIS, we really need to have it being tested by some part of our CI system, and by pre-merge build tests.
I believe Stefan Weil does, since he regularly sends fixes or opens LP bugs during freeze time.
We do build nsis/win32 with CI, but for some reason patchew was down.
I'm not sure we should duplicate the build on another CI, we should rather setup something to watch patchew and warn us when it goes down.
I'm not sure what happened since I (obviously) was not monitoring patchew during my vacation. However, the recent Python 3 port of docker.py bumped the requirement to Python 3.6 to run "make docker" tests, and this broke patchew which had an older version. I have now updated the tester.
Paolo
Re: [Qemu-devel] [PATCH v3 1/4] docs: convert README, CODING_STYLE and HACKING to RST syntax
Quoted 9 lines · Paolo Bonzini
Quoted 8 lines · Philippe Mathieu-Daudé
Quoted 2 lines
Doh. If we care about NSIS, we really need to have it being tested by some part of our CI system, and by pre-merge build tests.
I believe Stefan Weil does, since he regularly sends fixes or opens LP bugs during freeze time.
We do build nsis/win32 with CI, but for some reason patchew was down.
Quoted 8 lines
Quoted 2 lines
I'm not sure we should duplicate the build on another CI, we should rather setup something to watch patchew and warn us when it goes down.
I'm not sure what happened since I (obviously) was not monitoring patchew during my vacation. However, the recent Python 3 port of
docker.pybumped the requirement to Python 3.6 to run "make docker" tests, and this broke patchew which had an older version. I have now updated the tester.
FWIW testing/next fixes the over eager python3 upgrade (I hadn't realised how recent encoding was as a check_output keyword). Expect it in a PR in the next few days.
Quoted 2 lines
Paolo
--
Alex Bennée
PATCH v3 2/4 docs: merge HACKING.rst contents into CODING_STYLE.rst
In reply to Daniel P. BerrangéThe split of information between the two docs is rather arbitary and unclear. It is simpler for contributors if all the information is in one file.
--- CODING_STYLE.rst | 296 ++++++++++++++++++++++++++++++++++++++++++++++ HACKING.rst | 300 ----------------------------------------------- README.rst | 2 +- 3 files changed, 297 insertions(+), 301 deletions(-) delete mode 100644 HACKING.rst
CODING_STYLE.rst +296 -0
@@ -205,6 +205,302 @@ comment anyway.) Rationale: Consistency, and ease of visually picking out a multiline comment from the surrounding code. +Preprocessor +============ + +Variadic macros +--------------- + +For variadic macros, stick with this C99-like syntax: + +.. code-block:: c + + #define DPRINTF(fmt, ...) \ + do { printf("IRQ: " fmt, ## __VA_ARGS__); } while (0) + +Include directives +------------------ + +Order include directives as follows: + +.. code-block:: c + + #include "qemu/osdep.h" /* Always first... */ + #include <...> /* then system headers... */ + #include "..." /* and finally QEMU headers. */ + +The "qemu/osdep.h" header contains preprocessor macros that affect the behavior +of core system headers like <stdint.h>. It must be the first include so that +core system headers included by external libraries get the preprocessor macros +that QEMU depends on. + +Do not include "qemu/osdep.h" from header files since the .c file will have +already included it. + +C types +======= + +It should be common sense to use the right type, but we have collected +a few useful guidelines here. + +Scalars +------- + +If you're using "int" or "long", odds are good that there's a better type. +If a variable is counting something, it should be declared with an +unsigned type. + +If it's host memory-size related, size_t should be a good choice (use +ssize_t only if required). Guest RAM memory offsets must use ram_addr_t, +but only for RAM, it may not cover whole guest address space. + +If it's file-size related, use off_t. +If it's file-offset related (i.e., signed), use off_t. +If it's just counting small numbers use "unsigned int"; +(on all but oddball embedded systems, you can assume that that +type is at least four bytes wide). + +In the event that you require a specific width, use a standard type +like int32_t, uint32_t, uint64_t, etc. The specific types are +mandatory for VMState fields. + +Don't use Linux kernel internal types like u32, __u32 or __le32. + +Use hwaddr for guest physical addresses except pcibus_t +for PCI addresses. In addition, ram_addr_t is a QEMU internal address +space that maps guest RAM physical addresses into an intermediate +address space that can map to host virtual address spaces. Generally +speaking, the size of guest memory can always fit into ram_addr_t but +it would not be correct to store an actual guest physical address in a +ram_addr_t. + +For CPU virtual addresses there are several possible types. +vaddr is the best type to use to hold a CPU virtual address in +target-independent code. It is guaranteed to be large enough to hold a +virtual address for any target, and it does not change size from target +to target. It is always unsigned. +target_ulong is a type the size of a virtual address on the CPU; this means +it may be 32 or 64 bits depending on which target is being built. It should +therefore be used only in target-specific code, and in some +performance-critical built-per-target core code such as the TLB code. +There is also a signed version, target_long. +abi_ulong is for the ``*``-user targets, and represents a type the size of +'void ``*``' in that target's ABI. (This may not be the same as the size of a +full CPU virtual address in the case of target ABIs which use 32 bit pointers +on 64 bit CPUs, like sparc32plus.) Definitions of structures that must match +the target's ABI must use this type for anything that on the target is defined +to be an 'unsigned long' or a pointer type. +There is also a signed version, abi_long. + +Of course, take all of the above with a grain of salt. If you're about +to use some system interface that requires a type like size_t, pid_t or +off_t, use matching types for any corresponding variables. + +Also, if you try to use e.g., "unsigned int" as a type, and that +conflicts with the signedness of a related variable, sometimes +it's best just to use the *wrong* type, if "pulling the thread" +and fixing all related variables would be too invasive. + +Finally, while using descriptive types is important, be careful not to +go overboard. If whatever you're doing causes warnings, or requires +casts, then reconsider or ask for help. + +Pointers +-------- + +Ensure that all of your pointers are "const-correct". +Unless a pointer is used to modify the pointed-to storage, +give it the "const" attribute. That way, the reader knows +up-front that this is a read-only pointer. Perhaps more +importantly, if we're diligent about this, when you see a non-const +pointer, you're guaranteed that it is used to modify the storage +it points to, or it is aliased to another pointer that is. + +Typedefs +-------- + +Typedefs are used to eliminate the redundant 'struct' keyword, since type +names have a different style than other identifiers ("CamelCase" versus +"snake_case"). Each named struct type should have a CamelCase name and a +corresponding typedef. + +Since certain C compilers choke on duplicated typedefs, you should avoid +them and declare a typedef only in one header file. For common types, +you can use "include/qemu/typedefs.h" for example. However, as a matter +of convenience it is also perfectly fine to use forward struct +definitions instead of typedefs in headers and function prototypes; this +avoids problems with duplicated typedefs and reduces the need to include +headers from other headers. + +Reserved namespaces in C and POSIX +---------------------------------- + +Underscore capital, double underscore, and underscore 't' suffixes should be +avoided. + +Low level memory management +=========================== + +Use of the malloc/free/realloc/calloc/valloc/memalign/posix_memalign +APIs is not allowed in the QEMU codebase. Instead of these routines, +use the GLib memory allocation routines g_malloc/g_malloc0/g_new/ +g_new0/g_realloc/g_free or QEMU's qemu_memalign/qemu_blockalign/qemu_vfree +APIs. + +Please note that g_malloc will exit on allocation failure, so there +is no need to test for failure (as you would have to with malloc). +Calling g_malloc with a zero size is valid and will return NULL. + +Prefer g_new(T, n) instead of g_malloc(sizeof(T) ``*`` n) for the following +reasons: + +* It catches multiplication overflowing size_t; +* It returns T ``*`` instead of void ``*``, letting compiler catch more type errors. + +Declarations like + +.. code-block:: c + + T *v = g_malloc(sizeof(*v)) + +are acceptable, though. + +Memory allocated by qemu_memalign or qemu_blockalign must be freed with +qemu_vfree, since breaking this will cause problems on Win32. + +String manipulation +=================== + +Do not use the strncpy function. As mentioned in the man page, it does *not* +guarantee a NULL-terminated buffer, which makes it extremely dangerous to use. +It also zeros trailing destination bytes out to the specified length. Instead, +use this similar function when possible, but note its different signature: + +.. code-block:: c + + void pstrcpy(char *dest, int dest_buf_size, const char *src) + +Don't use strcat because it can't check for buffer overflows, but: + +.. code-block:: c + + char *pstrcat(char *buf, int buf_size, const char *s) + +The same limitation exists with sprintf and vsprintf, so use snprintf and +vsnprintf. + +QEMU provides other useful string functions: + +.. code-block:: c + + int strstart(const char *str, const char *val, const char **ptr) + int stristart(const char *str, const char *val, const char **ptr) + int qemu_strnlen(const char *s, int max_len) + +There are also replacement character processing macros for isxyz and toxyz, +so instead of e.g. isalnum you should use qemu_isalnum. + +Because of the memory management rules, you must use g_strdup/g_strndup +instead of plain strdup/strndup. + +Printf-style functions +====================== + +Whenever you add a new printf-style function, i.e., one with a format +string argument and following "..." in its prototype, be sure to use +gcc's printf attribute directive in the prototype. + +This makes it so gcc's -Wformat and -Wformat-security options can do +their jobs and cross-check format strings with the number and types +of arguments. + +C standard, implementation defined and undefined behaviors +========================================================== + +C code in QEMU should be written to the C99 language specification. A copy +of the final version of the C99 standard with corrigenda TC1, TC2, and TC3 +included, formatted as a draft, can be downloaded from: + + `<http://www.open-std.org/jtc1/sc22/WG14/www/docs/n1256.pdf>`_ + +The C language specification defines regions of undefined behavior and +implementation defined behavior (to give compiler authors enough leeway to +produce better code). In general, code in QEMU should follow the language +specification and avoid both undefined and implementation defined +constructs. ("It works fine on the gcc I tested it with" is not a valid +argument...) However there are a few areas where we allow ourselves to +assume certain behaviors because in practice all the platforms we care about +behave in the same way and writing strictly conformant code would be +painful. These are: + +* you may assume that integers are 2s complement representation +* you may assume that right shift of a signed integer duplicates + the sign bit (ie it is an arithmetic shift, not a logical shift) + +In addition, QEMU assumes that the compiler does not use the latitude +given in C99 and C11 to treat aspects of signed '<<' as undefined, as +documented in the GNU Compiler Collection manual starting at version 4.0. + +Error handling and reporting +============================ + +Reporting errors to the human user +---------------------------------- + +Do not use printf(), fprintf() or monitor_printf(). Instead, use +error_report() or error_vreport() from error-report.h. This ensures the +error is reported in the right place (current monitor or stderr), and in +a uniform format. + +Use error_printf() & friends to print additional information. + +error_report() prints the current location. In certain common cases +like command line parsing, the current location is tracked +automatically. To manipulate it manually, use the loc_``*``() from +error-report.h. + +Propagating errors +------------------ + +An error can't always be reported to the user right where it's detected, +but often needs to be propagated up the call chain to a place that can +handle it. This can be done in various ways. + +The most flexible one is Error objects. See error.h for usage +information. + +Use the simplest suitable method to communicate success / failure to +callers. Stick to common methods: non-negative on success / -1 on +error, non-negative / -errno, non-null / null, or Error objects. + +Example: when a function returns a non-null pointer on success, and it +can fail only in one way (as far as the caller is concerned), returning +null on failure is just fine, and certainly simpler and a lot easier on +the eyes than propagating an Error object through an Error ``*````*`` parameter. + +Example: when a function's callers need to report details on failure +only the function really knows, use Error ``*````*``, and set suitable errors. + +Do not report an error to the user when you're also returning an error +for somebody else to handle. Leave the reporting to the place that +consumes the error returned. + +Handling errors +--------------- + +Calling exit() is fine when handling configuration errors during +startup. It's problematic during normal operation. In particular, +monitor commands should never exit(). + +Do not call exit() or abort() to handle an error that can be triggered +by the guest (e.g., some unimplemented corner case in guest code +translation or device emulation). Guests should not be able to +terminate QEMU. + +Note that &error_fatal is just another way to exit(1), and &error_abort +is just another way to abort(). + + trace-events style ==================
HACKING.rst deleted +0 -300
300 lines not on this page · raw message
README.rst +1 -1
@@ -66,7 +66,7 @@ When submitting patches, one common approach is to use 'git format-patch' and/or 'git send-email' to format & send the mail to the [email protected] mailing list. All patches submitted must contain a 'Signed-off-by' line from the author. Patches should follow the -guidelines set out in the HACKING.rst and CODING_STYLE.rst files. +guidelines set out in the CODING_STYLE.rst file. Additional information on submitting patches can be found online via the QEMU website
Signature · 1 line
2.21.0
Re: [Qemu-devel] [PATCH v3 2/4] docs: merge HACKING.rst contents into CODING_STYLE.rst
Quoted 4 lines · Daniel P. Berrangé
The split of information between the two docs is rather arbitary and unclear. It is simpler for contributors if all the information is in one file.
Quoted 8 lines
Signed-off-by Daniel P. Berrangé <[email protected]>--- CODING_STYLE.rst | 296 ++++++++++++++++++++++++++++++++++++++++++++++ HACKING.rst | 300 ----------------------------------------------- README.rst | 2 +- 3 files changed, 297 insertions(+), 301 deletions(-) delete mode 100644 HACKING.rst
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org
PATCH v3 3/4 docs: document use of automatic cleanup functions in glib
In reply to Daniel P. BerrangéDocument the use of g_autofree and g_autoptr in glib for automatic freeing of memory.
--- CODING_STYLE.rst | 85 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+)
CODING_STYLE.rst +85 -0
@@ -441,6 +441,91 @@ In addition, QEMU assumes that the compiler does not use the latitude given in C99 and C11 to treat aspects of signed '<<' as undefined, as documented in the GNU Compiler Collection manual starting at version 4.0. +Automatic memory deallocation +============================= + +QEMU has a mandatory dependency either the GCC or CLang compiler. As +such it has the freedom to make use of a C language extension for +automatically running a cleanup function when a stack variable goes +out of scope. This can be used to simplify function cleanup paths, +often allowing many goto jumps to be eliminated, through automatic +free'ing of memory. + +The GLib2 library provides a number of functions/macros for enabling +automatic cleanup: + + `<https://developer.gnome.org/glib/stable/glib-Miscellaneous-Macros.html>`_ + +Most notably: + +* g_autofree - will invoke g_free() on the variable going out of scope + +* g_autoptr - for structs / objects, will invoke the cleanup func created + by a previous use of G_DEFINE_AUTOPTR_CLEANUP_FUNC. This is + supported for most GLib data types and GObjects + +For example, instead of + +.. code-block:: c + + int somefunc(void) { + int ret = -1; + char *foo = g_strdup_printf("foo%", "wibble"); + GList *bar = ..... + + if (eek) { + goto cleanup; + } + + ret = 0; + + cleanup: + g_free(foo); + g_list_free(bar); + return ret; + } + +Using g_autofree/g_autoptr enables the code to be written as: + +.. code-block:: c + + int somefunc(void) { + g_autofree char *foo = g_strdup_printf("foo%", "wibble"); + g_autoptr (GList) bar = ..... + + if (eek) { + return -1; + } + + return 0; + } + +While this generally results in simpler, less leak-prone code, there +are still some caveats to beware of + +* Variables declared with g_auto* MUST always be initialized, + otherwise the cleanup function will use uninitialized stack memory + +* If a variable declared with g_auto* holds a value which must + live beyond the life of the function, that value must be saved + and the original variable NULL'd out. This can be simpler using + g_steal_pointer + + +.. code-block:: c + + char *somefunc(void) { + g_autofree char *foo = g_strdup_printf("foo%", "wibble"); + g_autoptr (GList) bar = ..... + + if (eek) { + return NULL; + } + + return g_steal_pointer(&foo); + } + + Error handling and reporting ============================
Signature · 1 line
2.21.0
Re: [Qemu-devel] [PATCH v3 3/4] docs: document use of automatic cleanup functions in glib
Quoted 13 lines · Daniel P. Berrangé
Document the use of
g_autofreeandg_autoptrin glib for automatic freeing of memory.Signed-off-by Daniel P. Berrangé <[email protected]>--- CODING_STYLE.rst | 85 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+)CODING_STYLE.rst +0
-0
CODING_STYLE.rst In addition, QEMU assumes that the compiler does not use the latitude · line 447
Quoted 7 lines
CODING_STYLE.rst +4
-0@@ -441,6 +441,91 @@ In addition, QEMU assumes that the compiler does not use the latitude given in C99 and C11 to treat aspects of signed '<<' as undefined, as documented in the GNU Compiler Collection manual starting at version 4.0. +Automatic memory deallocation +============================= + +QEMU has a mandatory dependency either the GCC or CLang compiler. As
s/either/on either/
CODING_STYLE.rst In addition, QEMU assumes that the compiler does not use the latitude · line 471
Quoted 13 lines
CODING_STYLE.rst +12
-0+such it has the freedom to make use of a C language extension for +automatically running a cleanup function when a stack variable goes +out of scope. This can be used to simplify function cleanup paths, +often allowing many goto jumps to be eliminated, through automatic +free'ing of memory. + + +For example, instead of + +.. code-block:: c + + int somefunc(void) {
Should that { be on its own line to match our prevailing style?
Quoted 11 lines
CODING_STYLE.rst +11
-0+ int ret = -1; + char *foo = g_strdup_printf("foo%", "wibble"); + GList *bar = ..... + + if (eek) { + goto cleanup; + } + + ret = 0; + + cleanup:
CODING_STYLE.rst In addition, QEMU assumes that the compiler does not use the latitude · line 492
Quoted 10 lines
CODING_STYLE.rst +10
-0+ g_free(foo); + g_list_free(bar); + return ret; + } + +Using g_autofree/g_autoptr enables the code to be written as: + +.. code-block:: c + + int somefunc(void) {
here too
Quoted 15 lines
CODING_STYLE.rst +15
-0+ g_autofree char *foo = g_strdup_printf("foo%", "wibble"); + g_autoptr (GList) bar = ..... + + if (eek) { + return -1; + } + + return 0; + } + +While this generally results in simpler, less leak-prone code, there +are still some caveats to beware of + +* Variables declared with g_auto* MUST always be initialized, + otherwise the cleanup function will use uninitialized stack memory
CODING_STYLE.rst In addition, QEMU assumes that the compiler does not use the latitude · line 517
Quoted 10 lines
CODING_STYLE.rst +10
-0+ +* If a variable declared with g_auto* holds a value which must + live beyond the life of the function, that value must be saved + and the original variable NULL'd out. This can be simpler using + g_steal_pointer + + +.. code-block:: c + + char *somefunc(void) {
and again
Quoted 5 lines
CODING_STYLE.rst +3
-0+ g_autofree char *foo = g_strdup_printf("foo%", "wibble"); + g_autoptr (GList) bar = ..... +
CODING_STYLE.rst In addition, QEMU assumes that the compiler does not use the latitude · line 530
Quoted 10 lines
CODING_STYLE.rst +8
-0+ if (eek) { + return NULL; + } + + return g_steal_pointer(&foo); + } + + Error handling and reporting ============================
With those fixes,
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org
PATCH v3 4/4 docs: split the CODING_STYLE doc into distinct groups
In reply to Daniel P. Berrangé--- CODING_STYLE.rst | 9 +++++++++ 1 file changed, 9 insertions(+)
CODING_STYLE.rst +9 -0
@@ -7,6 +7,9 @@ QEMU Coding Style Please use the script checkpatch.pl in the scripts directory to check patches before submitting. +Formatting and style +******************** + Whitespace ==========
@@ -205,6 +208,9 @@ comment anyway.) Rationale: Consistency, and ease of visually picking out a multiline comment from the surrounding code. +Language usage +************** + Preprocessor ============
@@ -526,6 +532,9 @@ are still some caveats to beware of } +QEMU Specific Idioms +******************** + Error handling and reporting ============================
Signature · 1 line
2.21.0
Re: [Qemu-devel] [PATCH v3 4/4] docs: split the CODING_STYLE doc into distinct groups
Quoted 5 lines · Daniel P. Berrangé
Signed-off-by Daniel P. Berrangé <[email protected]>--- CODING_STYLE.rst | 9 +++++++++ 1 file changed, 9 insertions(+)
thanks
-- PMM