net/mlx5: use bond index for netdev operations
PATCH 1/1 net/mlx5: use bond index for netdev operations
In case of bonding, device ifindex was detected as the PF ifindex, so any operation using ifindex applied to PF instead of the bond device. These operations includes MTU get/set, up/down and mac address manipulation, etc.
This patch detects bond interface ifindex and name for PF that join a bond interface, uses it by default for netdev operations.
--- drivers/net/mlx5/linux/mlx5_ethdev_os.c | 56 +++++++++++++++++++++++++ drivers/net/mlx5/linux/mlx5_os.c | 13 ++++++ drivers/net/mlx5/mlx5.h | 4 ++ drivers/net/mlx5/mlx5_ethdev.c | 2 +- 4 files changed, 74 insertions(+), 1 deletion(-)
drivers/net/mlx5/linux/mlx5_ethdev_os.c +56 -0
@@ -151,6 +151,10 @@ mlx5_get_ifname(const struct rte_eth_dev *dev, char (*ifname)[IF_NAMESIZE])MLX5_ASSERT (priv);MLX5_ASSERT (priv->sh); +if (priv->bond_ifindex >0 ) { +memcpy (ifname, priv->bond_name,IF_NAMESIZE ); +return 0 ; + } ifindex =mlx5_ifindex (dev);if (!ifindex) {if (!priv->representor)
@@ -1101,6 +1105,58 @@ mlx5_sysfs_switch_info(unsigned int ifindex, struct mlx5_switch_info *info)return 0 ; } +/** +* Get bond information associated with network interface. +* +* @param pf_ifindex +* Network interface index of bond slave interface +* @param[out] ifindex +* Pointer to bond ifindex. +* @param[out] ifname +* Pointer to bond ifname. +* +* @return +* 0 on success, a negative errno value otherwise and rte_errno is set. +*/ +int +mlx5_sysfs_bond_info (unsigned int pf_ifindex,unsigned int *ifindex, +char *ifname) +{ +char name[IF_NAMESIZE ]; +FILE *file; +unsigned int index; +int ret; + +if (!if_indextoname (pf_ifindex, name) || !strlen (name)) { + rte_errno = errno; +return -rte_errno; + } +MKSTR (bond_if,"/sys/class/net/%s/master/ifindex" , name); +/* read bond ifindex */ + file =fopen (bond_if,"rb" ); +if (file ==NULL ) { + rte_errno = errno; +return -rte_errno; + } + ret =fscanf (file,"%u" , &index); +fclose (file); +if (ret <=0 ) { + rte_errno = errno; +return -rte_errno; + } +if (ifindex) + *ifindex = index; + +/* read bond device name from symbol link */ +if (ifname) { +if (!if_indextoname (index, ifname)) { + rte_errno = errno; +return -rte_errno; + } + } +return 0 ; +} +/** * DPDK callback to retrieve plug-in module EEPROM information (type and size). *
drivers/net/mlx5/linux/mlx5_os.c +13 -0
@@ -1168,6 +1168,19 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,*/ MLX5_ASSERT (spawn->ifindex); priv->if_index = spawn->ifindex; +if (priv->pf_bond >=0 && priv->master) { +/* Get bond interface info */ + err =mlx5_sysfs_bond_info (priv->if_index, + &priv->bond_ifindex, + priv->bond_name); +if (err) +DRV_LOG (ERR ,"unable to get bond info: %s" , +strerror (rte_errno)); +else +DRV_LOG (INFO ,"PF device %u, bond device %u(%s)" , + priv->if_index, priv->bond_ifindex, + priv->bond_name); + } eth_dev->data->dev_private = priv; priv->dev_data = eth_dev->data; eth_dev->data->mac_addrs = priv->mac;
drivers/net/mlx5/mlx5.h +4 -0
@@ -771,6 +771,8 @@ struct mlx5_priv {int32_t representor_id;/* Port representor identifier. */ int32_t pf_bond;/* >=0 means PF index in bonding configuration. */ unsigned int if_index;/* Associated kernel network device index. */ +uint32_t bond_ifindex;/**< Bond interface index. */ +char bond_name[IF_NAMESIZE ];/**< Bond interface name. */ /* RX/TX queues. */ unsigned int rxqs_n;/* RX queues array size. */ unsigned int txqs_n;/* TX queues array size. */
@@ -897,6 +899,8 @@ void mlx5_translate_port_name(const char *port_name_in, struct mlx5_switch_info *port_info_out);void mlx5_intr_callback_unregister (const struct rte_intr_handle *handle,rte_intr_callback_fn cb_fn,void *cb_arg); +int mlx5_sysfs_bond_info (unsigned int pf_ifindex,unsigned int *ifindex, +char *ifname);int mlx5_get_module_info (struct rte_eth_dev *dev,struct rte_eth_dev_module_info *modinfo); int mlx5_get_module_eeprom(struct rte_eth_dev *dev,
drivers/net/mlx5/mlx5_ethdev.c +1 -1
@@ -43,7 +43,7 @@ mlx5_ifindex(const struct rte_eth_dev *dev)MLX5_ASSERT (priv);MLX5_ASSERT (priv->if_index); - ifindex = priv->if_index; + ifindex = priv->bond_ifindex >0 ? priv->bond_ifindex : priv->if_index;if (!ifindex) rte_errno =ENXIO ;return ifindex;
Signature · 1 line
2.25.1
Quoted 14 lines
-----Original Message-----
From: Xueming Li <[email protected]>
Sent: Tuesday, September 15, 2020 6:06
To: Matan Azrad <[email protected]>; Slava Ovsiienko <[email protected]>
Cc: [email protected]; Asaf Penso <[email protected]>; Xueming(Steven) Li <[email protected]>; [email protected]
Subject: [PATCH] net/mlx5: use bond index for netdev operationsIn case of bonding, device ifindex was detected as the PF ifindex, so any operation using ifindex applied to PF instead of the bond device. These operations includes MTU get/set, up/down and mac address manipulation, etc.
Quoted 5 lines
This patch detects bond interface ifindex and name for PF that join a bond interface, uses it by default for netdev operations.
Signed-off-by Xueming Li <[email protected]>
Hi,
Quoted 169 lines
-----Original Message-----
From: dev <[email protected]> On Behalf Of Xueming Li
Sent: Tuesday, September 15, 2020 6:06 AM
To: Matan Azrad <[email protected]>; Slava Ovsiienko <[email protected]>
Cc: [email protected]; Asaf Penso <[email protected]>; Xueming(Steven) Li <[email protected]>; [email protected]
Subject: [dpdk-dev] [PATCH] net/mlx5: use bond index for netdev operationsIn case of bonding, device ifindex was detected as the PF ifindex, so any operation using ifindex applied to PF instead of the bond device. These operations includes MTU get/set, up/down and mac address manipulation, etc.
This patch detects bond interface ifindex and name for PF that join a bond interface, uses it by default for netdev operations.
Signed-off-by Xueming Li <[email protected]>--- drivers/net/mlx5/linux/mlx5_ethdev_os.c | 56 +++++++++++++++++++++++++ drivers/net/mlx5/linux/mlx5_os.c | 13 ++++++ drivers/net/mlx5/mlx5.h | 4 ++ drivers/net/mlx5/mlx5_ethdev.c | 2 +- 4 files changed, 74 insertions(+), 1 deletion(-)drivers/net/mlx5/linux/mlx5_ethdev_os.c +4
-0@@ -151,6 +151,10 @@ mlx5_get_ifname(const struct rte_eth_dev *dev, char (*ifname)[IF_NAMESIZE])MLX5_ASSERT (priv );MLX5_ASSERT (priv->sh); +if (priv->bond_ifindex >0 ) { +memcpy (ifname, priv->bond_name,IF_NAMESIZE ); +return 0 ; + } ifindex =mlx5_ifindex (dev);if (!ifindex) {drivers/net/mlx5/linux/mlx5_ethdev_os.c +52
-0if (!priv->representor)@@ -1101,6 +1105,58 @@ mlx5_sysfs_switch_info(unsigned int ifindex, struct mlx5_switch_info *info)return 0 ; } +/** +* Get bond information associated with network interface. +* +* @param pf_ifindex +* Network interface index of bond slave interface +* @param[out] ifindex +* Pointer to bond ifindex. +* @param[out] ifname +* Pointer to bond ifname. +* +* @return +* 0 on success, a negative errno value otherwise and rte_errno is set. +*/ +int +mlx5_sysfs_bond_info (unsigned int pf_ifindex,unsigned int *ifindex, +char *ifname) +{ +char name[IF_NAMESIZE ]; +FILE *file; +unsigned int index; +int ret; + +if (!if_indextoname (pf_ifindex, name) || !strlen (name)) { + rte_errno = errno; +return -rte_errno; + } +MKSTR (bond_if,"/sys/class/net/%s/master/ifindex" , name); +/* read bond ifindex */ + file =fopen (bond_if,"rb" ); +if (file ==NULL ) { + rte_errno = errno; +return -rte_errno; + } + ret =fscanf (file,"%u" , &index); +fclose (file); +if (ret <=0 ) { + rte_errno = errno; +return -rte_errno; + } +if (ifindex) + *ifindex = index; + +/* read bond device name from symbol link */ +if (ifname) { +if (!if_indextoname (index, ifname)) { + rte_errno = errno; +return -rte_errno; + } + } +return 0 ; +} +/** * DPDK callback to retrieve plug-in module EEPROM information (type and size).
*drivers/net/mlx5/linux/mlx5_os.c +13
-0@@ -1168,6 +1168,19 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,*/ MLX5_ASSERT (spawn->ifindex); priv->if_index = spawn->ifindex; +if (priv->pf_bond >=0 && priv->master) { +/* Get bond interface info */ + err =mlx5_sysfs_bond_info (priv->if_index, + &priv->bond_ifindex, + priv->bond_name); +if (err) +DRV_LOG (ERR ,"unable to get bond info: %s" , +strerror (rte_errno)); +else + DRV_LOG(INFO, "PF device %u, bond device %u(%s)", + priv->if_index, priv->bond_ifindex, + priv->bond_name); + } eth_dev->data->dev_private = priv; priv->dev_data = eth_dev->data;drivers/net/mlx5/linux/mlx5_os.c +0
-0eth_dev->data->mac_addrs = priv->mac;drivers/net/mlx5/mlx5.h +4
-0@@ -771,6 +771,8 @@ struct mlx5_priv {int32_t representor_id;/* Port representor identifier. */ int32_t pf_bond;/* >=0 means PF index in bonding configuration. */ unsigned int if_index;/* Associated kernel network device index. */ +uint32_t bond_ifindex;/**< Bond interface index. */ +char bond_name[IF_NAMESIZE ];/**< Bond interface name. */ /* RX/TX queues. */ unsigned int rxqs_n;/* RX queues array size. */ unsigned int txqs_n;/* TX queues array size. */ @@ -897,6 +899,8 @@ void mlx5_translate_port_name(const char *port_name_in, struct mlx5_switch_info *port_info_out);void mlx5_intr_callback_unregister (const struct rte_intr_handle *handle,rte_intr_callback_fn cb_fn,void *cb_arg); +int mlx5_sysfs_bond_info (unsigned int pf_ifindex,unsigned int *ifindex, +char *ifname);int mlx5_get_module_info (struct rte_eth_dev *dev,struct rte_eth_dev_module_info *modinfo);int mlx5_get_module_eeprom(struct
rte_eth_dev*dev,drivers/net/mlx5/mlx5_ethdev.c +1
-1@@ -43,7 +43,7 @@ mlx5_ifindex(const struct rte_eth_dev *dev)MLX5_ASSERT (priv);MLX5_ASSERT (priv->if_index); - ifindex = priv->if_index; + ifindex = priv->bond_ifindex >0 ? priv->bond_ifindex : priv- >if_index;if (!ifindex) rte_errno =ENXIO ;
Quoted 3 lines
return ifindex;
--
2.25.1
Patch applied to next-net-mlx,
Kindest regards
Raslan Darawsheh