RDMA/hns: Misc Updates
Subsystems (2)
v3 cover RDMA/hns: Misc Updates
Here are some miscellaneous cleanups and fixes for the hns driver, including refactor, some newly added checks and so on.
Previous discussion:
v2: https://patchwork.kernel.org/cover/11765125/
v1: https://patchwork.kernel.org/cover/11761647/
Changes since v2:
Fix some issuses according to Jason's comments.
- Change 'unlikely' to 'WARN_ON' and remove prints when getting illegal opcodes.
- Drop patch #2 from v1 because the newly added check is meaningless for sparse.
- Add fixes tag for patch #3 ~ #5.
- Change '1 << PAGE_SHIFT' to 'PAGE_SIZE' in patch #6.
Changes since v1:
- Fix a missing assignment of owner_bit in set_rc_wqe()
Jiaran Zhang (2):
RDMA/hns: Add check for the validity of sl configuration RDMA/hns: Solve the overflow of the calc_pg_sz()
Lang Cheng (1):
RDMA/hns: Correct typo of hns_roce_create_cq()
Weihang Li (3):
RDMA/hns: Refactor process about opcode in post_send() RDMA/hns: Fix configuration of ack_req_freq in QPC RDMA/hns: Fix missing sq_sig_type when querying QP
Wenpeng Liang (1):
RDMA/hns: Fix the wrong value of rnr_retry when querying qp
Yangyang Li (1):
RDMA/hns: Add interception for resizing SRQs
drivers/infiniband/hw/hns/hns_roce_cq.c | 2 +- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 178 ++++++++++++++++++----------- drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 2 + 3 files changed, 114 insertions(+), 68 deletions(-)
Signature · 1 line
2.8.1
PATCH v3 1/8 RDMA/hns: Refactor process about opcode in post_send()
According to the IB specifications, the verbs should return an immediate error when the users set an unsupported opcode. Furthermore, refactor codes about opcode in process of post_send to make the difference between opcodes clearer.
--- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 133 +++++++++++++++++------------ 1 file changed, 78 insertions(+), 55 deletions(-)
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +78 -55
@@ -292,6 +292,33 @@ static unsigned int calc_wr_sge_num(const struct ib_send_wr *wr,return valid_num; } +static __le32 get_immtdata (const struct ib_send_wr *wr) +{ +switch (wr->opcode) { +case IB_WR_SEND_WITH_IMM : +case IB_WR_RDMA_WRITE_WITH_IMM : +return cpu_to_le32 (be32_to_cpu (wr->ex.imm_data)); +default : +return 0 ; + } +} + +static int set_ud_opcode (struct hns_roce_v2_ud_send_wqe *ud_sq_wqe, +const struct ib_send_wr *wr) +{ +u32 ib_op = wr->opcode; + +if (ib_op !=IB_WR_SEND && ib_op !=IB_WR_SEND_WITH_IMM ) +return -EINVAL ; + + ud_sq_wqe->immtdata =get_immtdata (wr); + +roce_set_field (ud_sq_wqe->byte_4,V2_UD_SEND_WQE_BYTE_4_OPCODE_M , +V2_UD_SEND_WQE_BYTE_4_OPCODE_S ,to_hr_opcode (ib_op)); + +return 0 ; +} + static inline int set_ud_wqe(struct hns_roce_qp *qp, const struct ib_send_wr *wr, void *wqe, unsigned int *sge_idx,
@@ -300,15 +327,21 @@ static inline int set_ud_wqe(struct hns_roce_qp *qp,struct hns_roce_dev *hr_dev =to_hr_dev (qp->ibqp.device);struct hns_roce_ah *ah =to_hr_ah (ud_wr (wr)->ah);struct hns_roce_v2_ud_send_wqe *ud_sq_wqe = wqe; +struct ib_device *ibdev = &hr_dev->ib_dev;unsigned int curr_idx = *sge_idx;int valid_num_sge;u32 msg_len =0 ;bool loopback;u8 *smac; +int ret; valid_num_sge =calc_wr_sge_num (wr, &msg_len);memset (ud_sq_wqe,0 ,sizeof (*ud_sq_wqe)); + ret =set_ud_opcode (ud_sq_wqe, wr); +if (WARN_ON (ret)) +return ret; +roce_set_field (ud_sq_wqe->dmac,V2_UD_SEND_WQE_DMAC_0_M ,V2_UD_SEND_WQE_DMAC_0_S , ah->av.mac[0 ]); roce_set_field(ud_sq_wqe->dmac, V2_UD_SEND_WQE_DMAC_1_M,
@@ -329,23 +362,8 @@ static inline int set_ud_wqe(struct hns_roce_qp *qp,roce_set_bit (ud_sq_wqe->byte_40,V2_UD_SEND_WQE_BYTE_40_LBI_S , loopback); -roce_set_field (ud_sq_wqe->byte_4, -V2_UD_SEND_WQE_BYTE_4_OPCODE_M , -V2_UD_SEND_WQE_BYTE_4_OPCODE_S , -HNS_ROCE_V2_WQE_OP_SEND ); - ud_sq_wqe->msg_len =cpu_to_le32 (msg_len); -switch (wr->opcode) { -case IB_WR_SEND_WITH_IMM : -case IB_WR_RDMA_WRITE_WITH_IMM : - ud_sq_wqe->immtdata =cpu_to_le32 (be32_to_cpu (wr->ex.imm_data)); -break ; -default : - ud_sq_wqe->immtdata =0 ; -break ; - } -/* Set sig attr */ roce_set_bit (ud_sq_wqe->byte_4,V2_UD_SEND_WQE_BYTE_4_CQE_S , (wr->send_flags &IB_SEND_SIGNALED ) ?1 :0 );
@@ -402,34 +420,66 @@ static inline int set_ud_wqe(struct hns_roce_qp *qp,return 0 ; } +static int set_rc_opcode (struct hns_roce_v2_rc_send_wqe *rc_sq_wqe, +const struct ib_send_wr *wr) +{ +u32 ib_op = wr->opcode; + + rc_sq_wqe->immtdata =get_immtdata (wr); + +switch (ib_op) { +case IB_WR_RDMA_READ : +case IB_WR_RDMA_WRITE : +case IB_WR_RDMA_WRITE_WITH_IMM : + rc_sq_wqe->rkey =cpu_to_le32 (rdma_wr (wr)->rkey); + rc_sq_wqe->va =cpu_to_le64 (rdma_wr (wr)->remote_addr); +break ; +case IB_WR_SEND : +case IB_WR_SEND_WITH_IMM : +break ; +case IB_WR_ATOMIC_CMP_AND_SWP : +case IB_WR_ATOMIC_FETCH_AND_ADD : + rc_sq_wqe->rkey =cpu_to_le32 (atomic_wr (wr)->rkey); + rc_sq_wqe->va =cpu_to_le64 (atomic_wr (wr)->remote_addr); +break ; +case IB_WR_REG_MR : +set_frmr_seg (rc_sq_wqe,reg_wr (wr)); +break ; +case IB_WR_LOCAL_INV : +roce_set_bit (rc_sq_wqe->byte_4,V2_RC_SEND_WQE_BYTE_4_SO_S ,1 ); + fallthrough; +case IB_WR_SEND_WITH_INV : + rc_sq_wqe->inv_key =cpu_to_le32 (wr->ex.invalidate_rkey); +break ; +default : +return -EINVAL ; + } + +roce_set_field (rc_sq_wqe->byte_4,V2_RC_SEND_WQE_BYTE_4_OPCODE_M , +V2_RC_SEND_WQE_BYTE_4_OPCODE_S ,to_hr_opcode (ib_op)); + +return 0 ; +}static inline int set_rc_wqe (struct hns_roce_qp *qp,const struct ib_send_wr *wr,void *wqe,unsigned int *sge_idx,unsigned int owner_bit) { +struct ib_device *ibdev = &to_hr_dev (qp->ibqp.device)->ib_dev;struct hns_roce_v2_rc_send_wqe *rc_sq_wqe = wqe;unsigned int curr_idx = *sge_idx;unsigned int valid_num_sge;u32 msg_len =0 ; -int ret =0 ; +int ret; valid_num_sge =calc_wr_sge_num (wr, &msg_len);memset (rc_sq_wqe,0 ,sizeof (*rc_sq_wqe)); rc_sq_wqe->msg_len =cpu_to_le32 (msg_len); -switch (wr->opcode) { -case IB_WR_SEND_WITH_IMM : -case IB_WR_RDMA_WRITE_WITH_IMM : - rc_sq_wqe->immtdata =cpu_to_le32 (be32_to_cpu (wr->ex.imm_data)); -break ; -case IB_WR_SEND_WITH_INV : - rc_sq_wqe->inv_key =cpu_to_le32 (wr->ex.invalidate_rkey); -break ; -default : - rc_sq_wqe->immtdata =0 ; -break ; - } + ret =set_rc_opcode (rc_sq_wqe, wr); +if (WARN_ON (ret)) +return ret;roce_set_bit (rc_sq_wqe->byte_4,V2_RC_SEND_WQE_BYTE_4_FENCE_S , (wr->send_flags &IB_SEND_FENCE ) ?1 :0 );
@@ -443,33 +493,6 @@ static inline int set_rc_wqe(struct hns_roce_qp *qp,roce_set_bit (rc_sq_wqe->byte_4,V2_RC_SEND_WQE_BYTE_4_OWNER_S , owner_bit); -switch (wr->opcode) { -case IB_WR_RDMA_READ : -case IB_WR_RDMA_WRITE : -case IB_WR_RDMA_WRITE_WITH_IMM : - rc_sq_wqe->rkey =cpu_to_le32 (rdma_wr (wr)->rkey); - rc_sq_wqe->va =cpu_to_le64 (rdma_wr (wr)->remote_addr); -break ; -case IB_WR_LOCAL_INV : -roce_set_bit (rc_sq_wqe->byte_4,V2_RC_SEND_WQE_BYTE_4_SO_S ,1 ); - rc_sq_wqe->inv_key =cpu_to_le32 (wr->ex.invalidate_rkey); -break ; -case IB_WR_REG_MR : -set_frmr_seg (rc_sq_wqe,reg_wr (wr)); -break ; -case IB_WR_ATOMIC_CMP_AND_SWP : -case IB_WR_ATOMIC_FETCH_AND_ADD : - rc_sq_wqe->rkey =cpu_to_le32 (atomic_wr (wr)->rkey); - rc_sq_wqe->va =cpu_to_le64 (atomic_wr (wr)->remote_addr); -break ; -default : -break ; - } - -roce_set_field (rc_sq_wqe->byte_4,V2_RC_SEND_WQE_BYTE_4_OPCODE_M , -V2_RC_SEND_WQE_BYTE_4_OPCODE_S , -to_hr_opcode (wr->opcode)); -if (wr->opcode ==IB_WR_ATOMIC_CMP_AND_SWP || wr->opcode ==IB_WR_ATOMIC_FETCH_AND_ADD )set_atomic_seg (wr, rc_sq_wqe, valid_num_sge);
Signature · 1 line
2.8.1
Jason Gunthorpe
maintainerRe: [PATCH v3 for-next 1/8] RDMA/hns: Refactor process about opcode in post_send()
Quoted 9 lines · Weihang Li
According to the IB specifications, the verbs should return an immediate error when the users set an unsupported opcode. Furthermore, refactor codes about opcode in process of
post_sendto make the difference between opcodes clearer.Signed-off-by Weihang Li <[email protected]>--- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 133 +++++++++++++++++------------ 1 file changed, 78 insertions(+), 55 deletions(-)
This gives compile warnings:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function ‘set_ud_wqe’:drivers/infiniband/hw/hns/hns_roce_hw_v2.c:330:20: warning: unused variable ‘ibdev’ [-Wunused-variable]
330 | struct ib_device *ibdev = &hr_dev->ib_dev;
| ^~~~~drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function ‘set_rc_wqe’:drivers/infiniband/hw/hns/hns_roce_hw_v2.c:468:20: warning: unused variable ‘ibdev’ [-Wunused-variable]
468 | struct ib_device *ibdev = &to_hr_dev(qp->ibqp.device)->ib_dev;
| ^~~~~
I deleted the unused variables
Jason
Re: [PATCH v3 for-next 1/8] RDMA/hns: Refactor process about opcode in post_send()
Quoted 22 lines · Jason Gunthorpe
Quoted 9 lines · Weihang Li
According to the IB specifications, the verbs should return an immediate error when the users set an unsupported opcode. Furthermore, refactor codes about opcode in process of
post_sendto make the difference between opcodes clearer.Signed-off-by Weihang Li <[email protected]>--- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 133 +++++++++++++++++------------ 1 file changed, 78 insertions(+), 55 deletions(-)This gives compile warnings:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function ‘set_ud_wqe’:drivers/infiniband/hw/hns/hns_roce_hw_v2.c:330:20: warning: unused variable ‘ibdev’ [-Wunused-variable]
330 | structib_device*ibdev =&hr_dev->ib_dev;
| ^~~~~drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function ‘set_rc_wqe’:drivers/infiniband/hw/hns/hns_roce_hw_v2.c:468:20: warning: unused variable ‘ibdev’ [-Wunused-variable]
468 | structib_device*ibdev = &to_hr_dev(qp->ibqp.device)->ib_dev;
| ^~~~~
Quoted 4 lines
I deleted the unused variables
Jason
I forgot to remove them when I replace the prints with WARN_ON(), thank you :)
Weihang
PATCH v3 2/8 RDMA/hns: Add interception for resizing SRQs
In reply to Weihang LiFrom: Yangyang Li <[email protected]>
HIP08 doesn't support modifying the maximum number of outstanding WR in an SRQ. However, the driver does not return a failure message, and users may mistakenly think that the resizing is executed successfully. So the driver needs to intercept this operation.
--- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +4 -0
@@ -5036,6 +5036,10 @@ static int hns_roce_v2_modify_srq(struct ib_srq *ibsrq,struct hns_roce_cmd_mailbox *mailbox;int ret; +/* Resizing SRQs is not supported yet */ +if (srq_attr_mask &IB_SRQ_MAX_WR ) +return -EINVAL ; +if (srq_attr_mask &IB_SRQ_LIMIT ) {if (srq_attr->srq_limit >= srq->wqe_cnt)return -EINVAL ;
Signature · 1 line
2.8.1
PATCH v3 3/8 RDMA/hns: Correct typo of hns_roce_create_cq()
In reply to Weihang LiFrom: Lang Cheng <[email protected]>
Change "initialze" to "initialize".
--- drivers/infiniband/hw/hns/hns_roce_cq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/hns/hns_roce_cq.c +1 -1
@@ -287,7 +287,7 @@ int hns_roce_create_cq(struct ib_cq *ib_cq, const struct ib_cq_init_attr *attr,/* * For the QP created by kernel space, tptr value should be initialized * to zero; For the QP created by user space, it will cause synchronous -* problems if tptr is set to zero here, so we initialze it in user +* problems if tptr is set to zero here, so we initialize it in user * space. */ if (!udata && hr_cq->tptr_addr)
Signature · 1 line
2.8.1
PATCH v3 4/8 RDMA/hns: Add check for the validity of sl configuration
In reply to Weihang LiFrom: Jiaran Zhang <[email protected]>
According to the RoCE v1 specification, the sl (service level) 0-7 are mapped directly to priorities 0-7 respectively, sl 8-15 are reserved. The driver should verify whether the the value of sl is larger than 7, if so, an exception should be returned.
--- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 12 ++++++++++-- drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 2 ++ 2 files changed, 12 insertions(+), 2 deletions(-)
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +10 -2
@@ -4291,11 +4291,19 @@ static int hns_roce_v2_set_path(struct ib_qp *ibqp, V2_QPC_BYTE_28_FL_S, 0);memcpy (context->dgid, grh->dgid.raw,sizeof (grh->dgid.raw));memset (qpc_mask->dgid,0 ,sizeof (grh->dgid.raw)); + + hr_qp->sl =rdma_ah_get_sl (&attr->ah_attr); +if (unlikely (hr_qp->sl >MAX_SERVICE_LEVEL )) { +ibdev_err (ibdev, +"failed to fill QPC, sl (%d) shouldn't be larger than %d.\n" , + hr_qp->sl,MAX_SERVICE_LEVEL ); +return -EINVAL ; + } +roce_set_field (context->byte_28_at_fl,V2_QPC_BYTE_28_SL_M , -V2_QPC_BYTE_28_SL_S ,rdma_ah_get_sl (&attr->ah_attr)); +V2_QPC_BYTE_28_SL_S , hr_qp->sl);roce_set_field (qpc_mask->byte_28_at_fl,V2_QPC_BYTE_28_SL_M ,V2_QPC_BYTE_28_SL_S ,0 ); - hr_qp->sl =rdma_ah_get_sl (&attr->ah_attr);return 0 ; }
drivers/infiniband/hw/hns/hns_roce_hw_v2.h +2 -0
@@ -1941,6 +1941,8 @@ struct hns_roce_eq_context {#define HNS_ROCE_V2_AEQE_EVENT_QUEUE_NUM_S 0#define HNS_ROCE_V2_AEQE_EVENT_QUEUE_NUM_M GENMASK(23, 0) +#define MAX_SERVICE_LEVEL 0x7 +struct hns_roce_wqe_atomic_seg {__le64 fetchadd_swap_data;__le64 cmp_data;
Signature · 1 line
2.8.1
PATCH v3 5/8 RDMA/hns: Solve the overflow of the calc_pg_sz()
In reply to Weihang LiFrom: Jiaran Zhang <[email protected]>
calc_pg_sz() may gets a data calculation overflow if the PAGE_SIZE is 64 KB and hop_num is 2. It is because that all variables involved in calculation are defined in type of int. So change the type of bt_chunk_size, buf_chunk_size and obj_per_chunk_default to u64.
--- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +3 -3
@@ -1793,9 +1793,9 @@ static void calc_pg_sz(int obj_num, int obj_size, int hop_num, int ctx_bt_num, int *buf_page_size, int *bt_page_size, u32 hem_type) { u64 obj_per_chunk; -int bt_chunk_size =1 <<PAGE_SHIFT ; -int buf_chunk_size =1 <<PAGE_SHIFT ; -int obj_per_chunk_default = buf_chunk_size / obj_size; +u64 bt_chunk_size =PAGE_SIZE ; +u64 buf_chunk_size =PAGE_SIZE ; +u64 obj_per_chunk_default = buf_chunk_size / obj_size; *buf_page_size =0 ; *bt_page_size =0 ;
Signature · 1 line
2.8.1
PATCH v3 6/8 RDMA/hns: Fix the wrong value of rnr_retry when querying qp
In reply to Weihang LiFrom: Wenpeng Liang <[email protected]>
The rnr_retry returned to the user is not correct, it should be got from another fields in QPC.
--- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +3 -1
@@ -4799,7 +4799,9 @@ static int hns_roce_v2_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *qp_attr, qp_attr->retry_cnt =roce_get_field (context.byte_212_lsn,V2_QPC_BYTE_212_RETRY_CNT_M ,V2_QPC_BYTE_212_RETRY_CNT_S ); - qp_attr->rnr_retry =le32_to_cpu (context.rq_rnr_timer); + qp_attr->rnr_retry =roce_get_field (context.byte_244_rnr_rxack, +V2_QPC_BYTE_244_RNR_CNT_M , +V2_QPC_BYTE_244_RNR_CNT_S ); done: qp_attr->cur_qp_state = qp_attr->qp_state;
Signature · 1 line
2.8.1
PATCH v3 7/8 RDMA/hns: Fix configuration of ack_req_freq in QPC
In reply to Weihang LiThe hardware will add AckReq flag in BTH header according to the value of ack_req_freq to request ACK from responder for the packets with this flag. It should be greater than or equal to lp_pktn_ini instead of using a fixed value.
--- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +12 -6
@@ -3664,9 +3664,6 @@ static void modify_qp_reset_to_init(struct ib_qp *ibqp, V2_QPC_BYTE_76_SRQ_EN_S, 1); } -roce_set_field (context->byte_172_sq_psn,V2_QPC_BYTE_172_ACK_REQ_FREQ_M , -V2_QPC_BYTE_172_ACK_REQ_FREQ_S ,4 ); -roce_set_bit (context->byte_172_sq_psn,V2_QPC_BYTE_172_FRE_S ,1 ); hr_qp->access_flags = attr->qp_access_flags;
@@ -3977,6 +3974,7 @@ static int modify_qp_init_to_rtr(struct ib_qp *ibqp,dma_addr_t trrl_ba;dma_addr_t irrl_ba;enum ib_mtu mtu; +u8 lp_pktn_ini;u8 port_num;u64 *mtts;u8 *dmac;
@@ -4084,13 +4082,21 @@ static int modify_qp_init_to_rtr(struct ib_qp *ibqp, }#define MAX_LP_MSG_LEN 65536 -/* MTU*(2^LP_PKTN_INI) shouldn't be bigger than 64kb */ +/* MTU * (2 ^ LP_PKTN_INI) shouldn't be bigger than 64KB */ + lp_pktn_ini =ilog2 (MAX_LP_MSG_LEN /ib_mtu_enum_to_int (mtu)); +roce_set_field (context->byte_56_dqpn_err,V2_QPC_BYTE_56_LP_PKTN_INI_M , -V2_QPC_BYTE_56_LP_PKTN_INI_S , -ilog2 (MAX_LP_MSG_LEN /ib_mtu_enum_to_int (mtu))); +V2_QPC_BYTE_56_LP_PKTN_INI_S , lp_pktn_ini);roce_set_field (qpc_mask->byte_56_dqpn_err,V2_QPC_BYTE_56_LP_PKTN_INI_M ,V2_QPC_BYTE_56_LP_PKTN_INI_S ,0 ); +/* ACK_REQ_FREQ should be larger than or equal to LP_PKTN_INI */ +roce_set_field (context->byte_172_sq_psn,V2_QPC_BYTE_172_ACK_REQ_FREQ_M , +V2_QPC_BYTE_172_ACK_REQ_FREQ_S , lp_pktn_ini); +roce_set_field (qpc_mask->byte_172_sq_psn, +V2_QPC_BYTE_172_ACK_REQ_FREQ_M , +V2_QPC_BYTE_172_ACK_REQ_FREQ_S ,0 ); +roce_set_bit (qpc_mask->byte_108_rx_reqepsn,V2_QPC_BYTE_108_RX_REQ_PSN_ERR_S ,0 ); roce_set_field(qpc_mask->byte_96_rx_reqmsn, V2_QPC_BYTE_96_RX_REQ_MSN_M,
Signature · 1 line
2.8.1
PATCH v3 8/8 RDMA/hns: Fix missing sq_sig_type when querying QP
In reply to Weihang LiThe sq_sig_type field should be filled when querying QP, or the users may get a wrong value.
--- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 1 + 1 file changed, 1 insertion(+)
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +1 -0
@@ -4823,6 +4823,7 @@ static int hns_roce_v2_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *qp_attr, } qp_init_attr->cap = qp_attr->cap; + qp_init_attr->sq_sig_type = hr_qp->sq_signal_bits; out:mutex_unlock (&hr_qp->mutex);
Signature · 1 line
2.8.1
Quoted 31 lines · Weihang Li
Here are some miscellaneous cleanups and fixes for the hns driver, including refactor, some newly added checks and so on.
Previous discussion:
v2: https://patchwork.kernel.org/cover/11765125/
v1: https://patchwork.kernel.org/cover/11761647/Changes since v2:
Fix some issuses according to Jason's comments.
- Change 'unlikely' to 'WARN_ON' and remove prints when getting illegal opcodes.
- Drop patch #2 from v1 because the newly added check is meaningless for sparse.
- Add fixes tag for patch #3 ~ #5.
- Change '1 <<PAGE_SHIFT' to 'PAGE_SIZE' in patch #6.Changes since v1:
- Fix a missing assignment ofowner_bitinset_rc_wqe()Jiaran Zhang (2):
RDMA/hns: Add check for the validity of sl configuration RDMA/hns: Solve the overflow of thecalc_pg_sz()Lang Cheng (1):
RDMA/hns: Correct typo ofhns_roce_create_cq()Weihang Li (3):
RDMA/hns: Refactor process about opcode inpost_send()RDMA/hns: Fix configuration ofack_req_freqin QPC RDMA/hns: Fix missingsq_sig_typewhen querying QP
Quoted 5 lines
Wenpeng Liang (1):
RDMA/hns: Fix the wrong value ofrnr_retrywhen querying qpYangyang Li (1):
RDMA/hns: Add interception for resizing SRQs
Applied to for-next, thanks
Jason