PCI/portdrv: Don't disable pci device during shutdown
PATCH 1/1 PCI/portdrv: Don't disable pci device during shutdown
Use separate remove()/shutdown() callback, and don't disable pci device during shutdown. This can avoid some poweroff/reboot failures.
The poweroff/reboot failures can easily reproduce on Loongson platforms. I think this is not a Loongson-specific problem, instead, is a problem related to some specific PCI hosts. On some x86 platforms, radeon/amdgpu devices can cause the same problem, and commit faefba95c9e8ca3a523831c2e ("drm/amdgpu: just suspend the hw on pci shutdown") can resolve it.
As Tiezhu said, this occasionally shutdown or reboot failure is due to clear PCI_COMMAND_MASTER on the device in do_pci_disable_device().
drivers/pci/pci.c
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}When remove "pci_command &= ~PCI_COMMAND_MASTER;", it can work well when shutdown or reboot. This may implies that there are DMA activities on the device while shutdown.
Radeon driver is more difficult than amdgpu due to its confusing symbol names, and I have maintained an out-of-tree patch for a long time [1]. Recently, we found more and more devices can cause the same problem, and it is very difficult to modify all problematic drivers as radeon/amdgpu does (the .shutdown callback should make sure there is no DMA activity). So, I think modify the PCIe port driver is a simple and effective way. And as early discussed, kexec can still work after this patch.
[1] https://github.com/chenhuacai/linux/commit/6612f9c1fc290d42a14618ce9a7d03014d8ebb1a
--- drivers/pci/pcie/portdrv.h | 2 +- drivers/pci/pcie/portdrv_core.c | 6 ++++-- drivers/pci/pcie/portdrv_pci.c | 15 +++++++++++++-- 3 files changed, 18 insertions(+), 5 deletions(-)
drivers/pci/pcie/portdrv.h +1 -1
@@ -123,7 +123,7 @@ int pcie_port_device_resume(struct device *dev);int pcie_port_device_runtime_suspend (struct device *dev);int pcie_port_device_runtime_resume (struct device *dev);#endif -void pcie_port_device_remove (struct pci_dev *dev); +void pcie_port_device_remove (struct pci_dev *dev,bool disable);int __must_check pcie_port_bus_register (void );void pcie_port_bus_unregister (void );
drivers/pci/pcie/portdrv_core.c +4 -2
@@ -487,11 +487,13 @@ EXPORT_SYMBOL_GPL(pcie_port_find_device);* Remove PCI Express port service devices associated with given port and * disable MSI-X or MSI for the port. */ -void pcie_port_device_remove (struct pci_dev *dev) +void pcie_port_device_remove (struct pci_dev *dev,bool disable) {device_for_each_child (&dev->dev,NULL , remove_iter);pci_free_irq_vectors (dev); -pci_disable_device (dev); + +if (disable) +pci_disable_device (dev); }/**
drivers/pci/pcie/portdrv_pci.c +13 -2
@@ -142,7 +142,18 @@ static void pcie_portdrv_remove(struct pci_dev *dev)pm_runtime_dont_use_autosuspend (&dev->dev); } -pcie_port_device_remove (dev); +pcie_port_device_remove (dev, true); +} + +static void pcie_portdrv_shutdown (struct pci_dev *dev) +{ +if (pci_bridge_d3_possible (dev)) { +pm_runtime_forbid (&dev->dev); +pm_runtime_get_noresume (&dev->dev); +pm_runtime_dont_use_autosuspend (&dev->dev); + } + +pcie_port_device_remove (dev, false); } static pci_ers_result_t pcie_portdrv_error_detected(struct pci_dev *dev,
@@ -211,7 +222,7 @@ static struct pci_driver pcie_portdriver = { .probe = pcie_portdrv_probe, .remove = pcie_portdrv_remove, - .shutdown = pcie_portdrv_remove, + .shutdown = pcie_portdrv_shutdown, .err_handler = &pcie_portdrv_err_handler,
Signature · 1 line
2.7.0
Quoted 8 lines · Huacai Chen
Use separate remove()/shutdown() callback, and don't disable pci device during shutdown. This can avoid some poweroff/reboot failures.
The poweroff/reboot failures can easily reproduce on Loongson platforms. I think this is not a Loongson-specific problem, instead, is a problem related to some specific PCI hosts. On some x86 platforms, radeon/amdgpu devices can cause the same problem, and commit
faefba95c9e8ca3a523831c2e("drm/amdgpu: just suspend the hw on pci shutdown") can resolve it.
This sounds like a quirk to me rather than a behavior that should be applied to all platforms.
Hi, Sinan,
Quoted 5 lines · Sinan Kaya
Quoted 3 lines · Huacai Chen
Use separate remove()/shutdown() callback, and don't disable pci device during shutdown. This can avoid some poweroff/reboot failures.
Quoted 8 lines
Quoted 5 lines
The poweroff/reboot failures can easily reproduce on Loongson platforms. I think this is not a Loongson-specific problem, instead, is a problem related to some specific PCI hosts. On some x86 platforms, radeon/amdgpu devices can cause the same problem, and commit
faefba95c9e8ca3a523831c2e("drm/amdgpu: just suspend the hw on pci shutdown") can resolve it.This sounds like a quirk to me rather than a behavior that should be applied to all platforms.
Yes, this is very like a quirk, but it seems there are a lot of platforms that have problems, and removing the pci_disable_device() has no side effect.
Huacai
Quoted 5 lines · Huacai Chen
Quoted 2 lines
his sounds like a quirk to me rather than a behavior that should be applied to all platforms.
Yes, this is very like a quirk, but it seems there are a lot of platforms that have problems, and removing the
pci_disable_device()has no side effect.
Why is there no side effect?
AFAIK, kexec goes through the shutdown path and you are leaving a PCI device enabled during kexec boot which can corrupt the booting OS memory.
I don't think you can generalize a behavior based on a few quirky devices. You should be quirking only the device that has a problem rather than changing the behavior of all other platforms.
Quoted 11 lines · Sinan Kaya
Quoted 5 lines · Huacai Chen
Quoted 2 lines
his sounds like a quirk to me rather than a behavior that should be applied to all platforms.
Yes, this is very like a quirk, but it seems there are a lot of platforms that have problems, and removing the
pci_disable_device()has no side effect.Why is there no side effect?
AFAIK, kexec goes through the shutdown path and you are leaving a PCI device enabled during kexec boot which can corrupt the booting OS memory.
Hi,
The related kexec operations are already executed afterwards by the function pci_device_shutdown(), this is done by commit 4fc9bbf98fd6 ("PCI: Disable Bus Master only on kexec reboot") and commit 6e0eda3c3898 ("PCI: Don't try to disable Bus Master on disconnected PCI devices").
drivers/pci/pci-driver.c
static void pci_device_shutdown(struct device *dev) {
...
if (drv && drv->shutdown)
drv->shutdown(pci_dev);
/*
* If this is a kexec reboot, turn off Bus Master bit on the
* device to tell it to not continue to do DMA. Don't touch
* devices in D3cold or unknown states.
* If it is not a kexec reboot, firmware will hit the PCI
* devices with big hammer and stop their DMA any way.
*/
if (kexec_in_progress && (pci_dev->current_state <= PCI_D3hot))
pci_clear_master(pci_dev);
}device_shutdown()
dev->bus->shutdown() == pci_device_shutdown()
drv->shutdown() == pcie_portdrv_shutdown()
pci_disable_device()[ 36.159446] Call Trace: [ 36.241688] [<ffffffff80211434>] show_stack+0x9c/0x130 [ 36.326619] [<ffffffff80661b70>] dump_stack+0xb0/0xf0 [ 36.410403] [<ffffffff806a8240>] pcie_portdrv_shutdown+0x18/0x78 [ 36.495302] [<ffffffff8069c6b4>] pci_device_shutdown+0x44/0x90 [ 36.580027] [<ffffffff807aac90>] device_shutdown+0x130/0x290 [ 36.664486] [<ffffffff80265448>] kernel_power_off+0x38/0x80 [ 36.748272] [<ffffffff80265634>] __do_sys_reboot+0x1a4/0x258 [ 36.831985] [<ffffffff80218b90>] syscall_common+0x34/0x58
Early discussions:
https://lore.kernel.org/patchwork/patch/1304917/#1499666
https://lore.kernel.org/patchwork/patch/1305067/
Thanks,
Tiezhu
Quoted 4 lines
I don't think you can generalize a behavior based on a few quirky devices. You should be quirking only the device that has a problem rather than changing the behavior of all other platforms.
Hi, Sinan,
Quoted 15 lines · Huacai Chen
Hi, Sinan,
Quoted 11 lines · Sinan Kaya
Quoted 8 lines · Huacai Chen
Use separate remove()/shutdown() callback, and don't disable pci device during shutdown. This can avoid some poweroff/reboot failures.
The poweroff/reboot failures can easily reproduce on Loongson platforms. I think this is not a Loongson-specific problem, instead, is a problem related to some specific PCI hosts. On some x86 platforms, radeon/amdgpu devices can cause the same problem, and commit
faefba95c9e8ca3a523831c2e("drm/amdgpu: just suspend the hw on pci shutdown") can resolve it.
Quoted 5 lines
Quoted 2 lines
This sounds like a quirk to me rather than a behavior that should be applied to all platforms.
Yes, this is very like a quirk, but it seems there are a lot of platforms that have problems, and removing the
pci_disable_device()has no side effect.
I have seen that you talk about kexec (but this email didn't go to my inbox). This has been discussed in another thread, and Lucas told us that in pci_device_shutdown the Bus Master is disabled for kexec. So I think there will be no memory corruption. Moreover, before 4.15 there is no .shutdown callback for portdrv, but kexec still works.
Yes, the perfect way is to modify all problematic drivers, as radeon/amdgpu does. But I don't have enough knowledge about all of the devices.
Huacai
Quoted 2 lines
Huacai
Hi, Bjorn
Quoted 30 lines · Huacai Chen
Hi, Sinan,
Quoted 15 lines · Huacai Chen
Hi, Sinan,
Quoted 11 lines · Sinan Kaya
Quoted 8 lines · Huacai Chen
Use separate remove()/shutdown() callback, and don't disable pci device during shutdown. This can avoid some poweroff/reboot failures.
The poweroff/reboot failures can easily reproduce on Loongson platforms. I think this is not a Loongson-specific problem, instead, is a problem related to some specific PCI hosts. On some x86 platforms, radeon/amdgpu devices can cause the same problem, and commit
faefba95c9e8ca3a523831c2e("drm/amdgpu: just suspend the hw on pci shutdown") can resolve it.Quoted 5 lines
Quoted 2 lines
This sounds like a quirk to me rather than a behavior that should be applied to all platforms.
Yes, this is very like a quirk, but it seems there are a lot of platforms that have problems, and removing the
pci_disable_device()has no side effect.I have seen that you talk about kexec (but this email didn't go to my inbox). This has been discussed in another thread, and Lucas told us that in
pci_device_shutdownthe Bus Master is disabled for kexec. So I think there will be no memory corruption. Moreover, before 4.15 there is no .shutdown callback for portdrv, but kexec still works.
Quoted 5 lines
Yes, the perfect way is to modify all problematic drivers, as radeon/amdgpu does. But I don't have enough knowledge about all of the devices.
Huacai
Any new comments?
Huacai
Quoted 2 lines
Quoted 2 lines
Huacai