nl80211: add common API to configure SAR power limitations.
Subsystems (4)
RFC 1/2 nl80211: add common API to configure SAR power limitations.
NL80211_CMD_SET_SAR_SPECS is added to configure SAR from user space. NL80211_ATTR_SAR_SPEC is used to pass the SAR power specification when used with NL80211_CMD_SET_SAR_SPECS.
Wireless driver needs to register SAR type, supported frequency ranges to wiphy, so user space can query it. The index in frequency range is used to specify which sub band the power limitation applies to. The SAR type is for compatibility, so later other SAR mechanism can be implemented without breaking the user space SAR applications.
Normal process is user space quries the SAR capability, and gets the index of supported frequency ranges and associates the power limitation with this index and sends to kernel.
Here is an example of message send to kernel:
8c 00 00 00 08 00 03 00 15 00 00 00 38 00 26 81
08 00 01 00 00 00 00 00 2c 00 02 80 14 00 01 80
05 00 02 00 00 00 00 00 05 00 01 00 38 00 00 00
14 00 02 80 05 00 02 00 01 00 00 00 05 00 01 00
48 00 00 00
NL80211_CMD_SET_SAR_SPECS: 0x8c NL80211_ATTR_SAR_SPEC: 0x8126 (NLA_NESTED) NL80211_SAR_ATTR_TYPE: 0x00 (NL80211_SAR_TYPE_POWER) NL80211_SAR_ATTR_SPECS: 0x8002 (NLA_NESTED) freq range 0 power: 0x38 in 0.25dbm unit (14dbm) freq range 1 power: 0x48 in 0.25dbm unit (18dbm)
--- include/net/cfg80211.h | 52 +++++++++++++ include/net/mac80211.h | 2 + include/uapi/linux/nl80211.h | 86 +++++++++++++++++++++ net/mac80211/cfg.c | 12 +++ net/wireless/nl80211.c | 173 +++++++++++++++++++++++++++++++++++++++++++ net/wireless/rdev-ops.h | 12 +++ net/wireless/trace.h | 19 +++++ 7 files changed, 356 insertions(+)
include/net/cfg80211.h +52 -0
@@ -1663,6 +1663,55 @@ struct station_info {u8 connected_to_as; }; +/** +* struct cfg80211_sar_sub_specs - sub specs limit +* @power: value in 0.25dbm +* @freq_range_index: index the power limitation applies to +*/ +struct cfg80211_sar_sub_specs { +u8 power; +u8 freq_range_index; +}; + +/** +* struct cfg80211_sar_specs - sar limit specs +* @type: it's set with power in 0.25dbm or other types +* @num_sub_specs: number of sar sub specs +* @sub_specs: memory to hold the sar sub specs +*/ +struct cfg80211_sar_specs { +enum nl80211_sar_type type; +u16 num_sub_specs; +struct cfg80211_sar_sub_specs *sub_specs; +}; + + +/** +* @struct cfg80211_sar_chan_ranges - sar frequency ranges +* @index: the index of this range. It's used to specify +* the frequency range when setting SAR power limitation +* @start_freq: start channel frequency in kHZ. For example, +* 2.4G channel 1 is represented as 2412000 +* @end_freq: end channel frequency in kHZ +*/ +struct cfg80211_sar_freq_ranges { +u8 index; +u32 start_freq; +u32 end_freq; +}; + +/** +* struct cfg80211_sar_capa - sar limit capability +* @type: it's set via power in 0.25dbm or other types +* @num_freq_ranges: number of frequency ranges +* @chan_ranges: memory to hold the channel ranges. +*/ +struct cfg80211_sar_capa { +enum nl80211_sar_type type; +u8 num_freq_ranges; +const struct cfg80211_sar_freq_ranges *freq_ranges; +}; +#if IS_ENABLED (CONFIG_CFG80211 )/** * cfg80211_get_station - retrieve information about a given station
@@ -4153,6 +4202,7 @@ struct cfg80211_ops { struct cfg80211_tid_config *tid_conf);int (*reset_tid_config)(struct wiphy *wiphy,struct net_device *dev,const u8 *peer,u8 tids); +int (*set_sar_specs)(struct wiphy *wiphy,struct cfg80211_sar_specs *sar); };/*
@@ -4919,6 +4969,8 @@ struct wiphy {u8 max_data_retry_count; +const struct cfg80211_sar_capa *sar_capa; +char priv[]__aligned(NETDEV_ALIGN) ; };
include/net/mac80211.h +2 -0
@@ -4125,6 +4125,8 @@ struct ieee80211_ops {int (*reset_tid_config)(struct ieee80211_hw *hw,struct ieee80211_vif *vif,struct ieee80211_sta *sta,u8 tids); +int (*set_sar_specs)(struct ieee80211_hw *hw, +const struct cfg80211_sar_specs *sar); };/**
include/uapi/linux/nl80211.h +86 -0
114 lines not on this page · raw message
net/mac80211/cfg.c +12 -0
@@ -3993,6 +3993,17 @@ static int ieee80211_reset_tid_config(struct wiphy *wiphy,return ret; } +static int ieee80211_set_sar_specs (struct wiphy *wiphy, +struct cfg80211_sar_specs *sar) +{ +struct ieee80211_local *local =wiphy_priv (wiphy); + +if (!local->ops->set_sar_specs) +return -EOPNOTSUPP ; + +return local->ops->set_sar_specs (&local->hw, sar); +} +const struct cfg80211_ops mac80211_config_ops = { .add_virtual_intf = ieee80211_add_iface, .del_virtual_intf = ieee80211_del_iface,
@@ -4096,4 +4107,5 @@ const struct cfg80211_ops mac80211_config_ops = { .probe_mesh_link = ieee80211_probe_mesh_link, .set_tid_config = ieee80211_set_tid_config, .reset_tid_config = ieee80211_reset_tid_config, + .set_sar_specs = ieee80211_set_sar_specs, };
net/wireless/nl80211.c +173 -0
215 lines not on this page · raw message
net/wireless/rdev-ops.h +12 -0
@@ -1356,4 +1356,16 @@ static inline int rdev_reset_tid_config(struct cfg80211_registered_device *rdev, return ret; } +static inline int rdev_set_sar_specs (struct cfg80211_registered_device *rdev, +struct cfg80211_sar_specs *sar) +{ +int ret; + +trace_rdev_set_sar_specs (&rdev->wiphy, sar); + ret = rdev->ops->set_sar_specs (&rdev->wiphy, sar); +trace_rdev_return_int (&rdev->wiphy, ret); + +return ret; +} +#endif /* __CFG80211_RDEV_OPS */
net/wireless/trace.h +19 -0
@@ -3547,6 +3547,25 @@ TRACE_EVENT(rdev_reset_tid_config,TP_printk (WIPHY_PR_FMT ", " NETDEV_PR_FMT ", peer: " MAC_PR_FMT ", tids: 0x%x" ,WIPHY_PR_ARG ,NETDEV_PR_ARG ,MAC_PR_ARG (peer), __entry->tids) ); + +TRACE_EVENT (rdev_set_sar_specs, + TP_PROTO(struct wiphy *wiphy, struct cfg80211_sar_specs *sar), +TP_ARGS (wiphy, sar), +TP_STRUCT__entry ( + WIPHY_ENTRY + __field(u16, type) +__field (u16, num) + ), +TP_fast_assign ( + WIPHY_ASSIGN; + __entry->type = sar->type; + __entry->num = sar->num_sub_specs; + + ), +TP_printk (WIPHY_PR_FMT ", Set type:%d, num_specs:%d" , +WIPHY_PR_ARG , __entry->type, __entry->num) +); +#endif /* !__RDEV_OPS_TRACE || TRACE_HEADER_MULTI_READ */ #undef TRACE_INCLUDE_PATH
Signature · 1 line
2.7.4
RFC 2/2 ath10k: allow dynamic SAR power limits via common API
ath10k assigns ath10k_mac_set_sar_specs to ath10k_ops, and this function is called when user space application calls NL80211_CMD_SET_SAR_SPECS. ath10k also registers SAR type, and supported frequency ranges to wiphy so user space can query SAR capabilities.
ath10k_mac_set_sar_specs further sets the power to firmware to limit the TX power.
This feature is controlled by hw parameter: dynamic_sar_support.
--- drivers/net/wireless/ath/ath10k/core.c | 16 +++++ drivers/net/wireless/ath/ath10k/core.h | 3 + drivers/net/wireless/ath/ath10k/hw.h | 2 + drivers/net/wireless/ath/ath10k/mac.c | 106 +++++++++++++++++++++++++++++++++ 4 files changed, 127 insertions(+)
drivers/net/wireless/ath/ath10k/core.c +16 -0
@@ -90,6 +90,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = true, + .dynamic_sar_support = false, }, { .id = QCA988X_HW_2_0_VERSION,
@@ -124,6 +125,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = true, + .dynamic_sar_support = false, }, { .id = QCA9887_HW_1_0_VERSION,
@@ -159,6 +161,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, }, { .id = QCA6174_HW_3_2_VERSION,
@@ -189,6 +192,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .tx_stats_over_pktlog = false, .bmi_large_size_download = true, .supports_peer_stats_info = true, + .dynamic_sar_support = true, }, { .id = QCA6174_HW_2_1_VERSION,
@@ -223,6 +227,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, }, { .id = QCA6174_HW_2_1_VERSION,
@@ -257,6 +262,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, }, { .id = QCA6174_HW_3_0_VERSION,
@@ -291,6 +297,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, }, { .id = QCA6174_HW_3_2_VERSION,
@@ -329,6 +336,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .fw_diag_ce_download = true, .tx_stats_over_pktlog = false, .supports_peer_stats_info = true, + .dynamic_sar_support = true, }, { .id = QCA99X0_HW_2_0_DEV_VERSION,
@@ -369,6 +377,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, }, { .id = QCA9984_HW_1_0_DEV_VERSION,
@@ -416,6 +425,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, }, { .id = QCA9888_HW_2_0_DEV_VERSION,
@@ -460,6 +470,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, }, { .id = QCA9377_HW_1_0_DEV_VERSION,
@@ -494,6 +505,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, }, { .id = QCA9377_HW_1_1_DEV_VERSION,
@@ -530,6 +542,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = true, .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, }, { .id = QCA9377_HW_1_1_DEV_VERSION,
@@ -557,6 +570,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .ast_skid_limit = 0x10, .num_wds_entries = 0x20, .uart_pin_workaround = true, + .dynamic_sar_support = false, }, { .id = QCA4019_HW_1_0_DEV_VERSION,
@@ -598,6 +612,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, }, { .id = WCN3990_HW_1_0_DEV_VERSION,
@@ -625,6 +640,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = false, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .dynamic_sar_support = true, }, };
drivers/net/wireless/ath/ath10k/core.h +3 -0
@@ -1281,6 +1281,9 @@ struct ath10k {bool coex_support;int coex_gpio_pin; +u32 tx_power_2g_limit; +u32 tx_power_5g_limit; +/* must be last */ u8 drv_priv[]__aligned(sizeof(void *)) ; };
drivers/net/wireless/ath/ath10k/hw.h +2 -0
@@ -623,6 +623,8 @@ struct ath10k_hw_params {/* provides bitrates for sta_statistics using WMI_TLV_PEER_STATS_INFO_EVENTID */ bool supports_peer_stats_info; + +bool dynamic_sar_support; };struct htt_rx_desc ;
drivers/net/wireless/ath/ath10k/mac.c +106 -0
136 lines not on this page · raw message
Signature · 1 line
2.7.4
Sorry, send to wrong ath11k list.
Let me resend to ath10k list for these 2 patches.
Thanks,
Carl
Quoted 585 lines · Carl Huang
NL80211_CMD_SET_SAR_SPECSis added to configure SAR from user space.NL80211_ATTR_SAR_SPECis used to pass the SAR power specification when used withNL80211_CMD_SET_SAR_SPECS.Wireless driver needs to register SAR type, supported frequency ranges to wiphy, so user space can query it. The index in frequency range is used to specify which sub band the power limitation applies to. The SAR type is for compatibility, so later other SAR mechanism can be implemented without breaking the user space SAR applications.
Normal process is user space quries the SAR capability, and gets the index of supported frequency ranges and associates the power limitation with this index and sends to kernel.
Here is an example of message send to kernel:
8c 00 00 00 08 00 03 00 15 00 00 00 38 00 26 81
08 00 01 00 00 00 00 00 2c 00 02 80 14 00 01 80
05 00 02 00 00 00 00 00 05 00 01 00 38 00 00 00
14 00 02 80 05 00 02 00 01 00 00 00 05 00 01 00
48 00 00 00NL80211_CMD_SET_SAR_SPECS: 0x8c NL80211_ATTR_SAR_SPEC: 0x8126 (NLA_NESTED) NL80211_SAR_ATTR_TYPE: 0x00 (NL80211_SAR_TYPE_POWER) NL80211_SAR_ATTR_SPECS: 0x8002 (NLA_NESTED) freq range 0 power: 0x38 in 0.25dbm unit (14dbm) freq range 1 power: 0x48 in 0.25dbm unit (18dbm)Signed-off-by Carl Huang <[email protected]>--- include/net/cfg80211.h | 52 +++++++++++++ include/net/mac80211.h | 2 + include/uapi/linux/nl80211.h | 86 +++++++++++++++++++++ net/mac80211/cfg.c | 12 +++ net/wireless/nl80211.c | 173 +++++++++++++++++++++++++++++++++++++++++++ net/wireless/rdev-ops.h | 12 +++ net/wireless/trace.h | 19 +++++ 7 files changed, 356 insertions(+)include/net/cfg80211.h +50
-0@@ -1663,6 +1663,55 @@ struct station_info {u8 connected_to_as; }; +/** +* struct cfg80211_sar_sub_specs - sub specs limit +* @power: value in 0.25dbm +* @freq_range_index: index the power limitation applies to +*/ +struct cfg80211_sar_sub_specs { +u8 power; +u8 freq_range_index; +}; + +/** +* struct cfg80211_sar_specs - sar limit specs +* @type: it's set with power in 0.25dbm or other types +* @num_sub_specs: number of sar sub specs +* @sub_specs: memory to hold the sar sub specs +*/ +struct cfg80211_sar_specs { +enum nl80211_sar_type type; +u16 num_sub_specs; +struct cfg80211_sar_sub_specs *sub_specs; +}; + + +/** +* @struct cfg80211_sar_chan_ranges - sar frequency ranges +* @index: the index of this range. It's used to specify +* the frequency range when setting SAR power limitation +* @start_freq: start channel frequency in kHZ. For example, +* 2.4G channel 1 is represented as 2412000 +* @end_freq: end channel frequency in kHZ +*/ +struct cfg80211_sar_freq_ranges { +u8 index; +u32 start_freq; +u32 end_freq; +}; + +/** +* struct cfg80211_sar_capa - sar limit capability +* @type: it's set via power in 0.25dbm or other types +* @num_freq_ranges: number of frequency ranges +* @chan_ranges: memory to hold the channel ranges. +*/ +struct cfg80211_sar_capa { +enum nl80211_sar_type type; +u8 num_freq_ranges; +const struct cfg80211_sar_freq_ranges *freq_ranges; +}; +#if IS_ENABLED (CONFIG_CFG80211 )/** * cfg80211_get_station - retrieve information about a given station @@ -4153,6 +4202,7 @@ struct cfg80211_ops { struct cfg80211_tid_config *tid_conf);int (*reset_tid_config)(struct wiphy *wiphy,struct net_device *dev,const u8 *peer,u8 tids); +int (*set_sar_specs)(struct wiphy *wiphy,struct cfg80211_sar_specs *sar); };/*
include/net/cfg80211.h +2
-0@@ -4919,6 +4969,8 @@ struct wiphy {u8 max_data_retry_count; +const struct cfg80211_sar_capa *sar_capa; +char priv[]__aligned(NETDEV_ALIGN) ; };include/net/mac80211.h +2
-0@@ -4125,6 +4125,8 @@ struct ieee80211_ops {int (*reset_tid_config)(struct ieee80211_hw *hw,struct ieee80211_vif *vif,struct ieee80211_sta *sta,u8 tids); +int (*set_sar_specs)(struct ieee80211_hw *hw, +const struct cfg80211_sar_specs *sar); };/** include/uapi/linux/nl80211.h +0
-0@@ -1177,6 +1177,9 @@* includes the contents of the frame. %NL80211_ATTR_ACK flag is included
* if the recipient acknowledged the frame.
*
+ * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is
+ * passed using %NL80211_ATTR_SAR_SPEC.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/include/uapi/linux/nl80211.h +2
-0@@ -1407,6 +1410,8 @@ enum nl80211_commands {NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS , + NL80211_CMD_SET_SAR_SPECS, +/* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -2513,6 +2518,10 @@ enum nl80211_commands {* @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from
* association request when used withNL80211_CMD_NEW_STATION).
*
+ * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when
+ * used with %NL80211_CMD_SET_SAR_SPECS. It contains array of
+ * %nl80211_sar_specs_attrs.
+ *
* @NUM_NL80211_ATTR: total number ofnl80211_attrsavailable
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal useinclude/uapi/linux/nl80211.h +48
-0@@ -2995,6 +3004,8 @@ enum nl80211_attrs {NL80211_ATTR_HE_6GHZ_CAPABILITY , +NL80211_ATTR_SAR_SPEC , +/* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST,@@ -7004,4 +7015,79 @@ enum nl80211_iftype_akm_attributes { NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1, }; +/** +* enum nl80211_sar_type - type of SAR specs +* +* @NL80211_SAR_TYPE_POWER: the value is specified in 0.25 dbm +* +*/ +enum nl80211_sar_type { +NL80211_SAR_TYPE_POWER , + +/* add new type here */ + +/* Keep last */ +NUM_NL80211_SAR_TYPE , +}; + +/** +* nl80211_sar_attrs - Attributes for SAR spec +* +* @NL80211_SAR_ATTR_TYPE: Type of SAR: power or index +* +* @NL80211_SAR_ATTR_SPECS: Nested array of SAR power +* limit specifications. Each specification contains a set +* of %nl80211_sar_specs_attrs +* +* @__NL80211_SAR_ATTR_LAST: Internal +* @NL80211_SAR_ATTR_MAX: highest sar attribute +* +* These attributes are used with %NL80211_CMD_SET_SAR_SPEC +*/ +enum nl80211_sar_attrs { + __NL80211_SAR_ATTR_INVALID, + +NL80211_SAR_ATTR_TYPE , +NL80211_SAR_ATTR_SPECS , + + __NL80211_SAR_ATTR_LAST, +NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST -1 , +}; + +#define NL80211_SAR_ALL_FREQ_RNAGES 0xff +#define NUM_MAX_NL80211_SAR_FREQ_RANGES 0xfe + +/** +* nl80211_sar_specs_attrs - Attributes for SAR power limit specs +* +* @NL80211_SAR_ATTR_SPECS_POWER: Required (u32)value to specify the actual
+ * power limit value in units of 0.25 dBm if type is
+ *NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm)
+ *
+ * @NL80211_SAR_ATTR_SPECS_FREQ_RANGES_INDEX: optional (u32) value to specify the
+ * index of exported freq ranges table. If this attribute is not
present, then
+ * the power is applied to all freq ranges, i.e, all bands
+ *
+ * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start
+ * frequency of this range to register SAR capability to wihpy and the
unit
+ * is kHZ
+ *
+ * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end frequency
+ * of this range to register SAR capability to wiphy and the unit is
kHZ
+ *
+ * @__NL80211_SAR_ATTR_SPECS_LAST: Internal
+ * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute
+ */include/uapi/linux/nl80211.h +12
-0+enum nl80211_sar_specs_attrs { + __NL80211_SAR_ATTR_SPECS_INVALID, + +NL80211_SAR_ATTR_SPECS_POWER , +NL80211_SAR_ATTR_SPECS_FREQ_RANGE_INDEX , +NL80211_SAR_ATTR_SPECS_START_FREQ , +NL80211_SAR_ATTR_SPECS_END_FREQ , + + __NL80211_SAR_ATTR_SPECS_LAST, +NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST -1 , +}; +#endif /* __LINUX_NL80211_H */ net/mac80211/cfg.c +11
-0@@ -3993,6 +3993,17 @@ static int ieee80211_reset_tid_config(structwiphy *wiphy, return ret; } +static int ieee80211_set_sar_specs (struct wiphy *wiphy, +struct cfg80211_sar_specs *sar) +{ +struct ieee80211_local *local =wiphy_priv (wiphy); + +if (!local->ops->set_sar_specs) +return -EOPNOTSUPP ; + +return local->ops->set_sar_specs (&local->hw, sar); +} +const struct cfg80211_ops mac80211_config_ops = { .add_virtual_intf = ieee80211_add_iface,net/mac80211/cfg.c +1
-0.del_virtual_intf = ieee80211_del_iface,@@ -4096,4 +4107,5 @@ const struct cfg80211_ops mac80211_config_ops = { .probe_mesh_link = ieee80211_probe_mesh_link, .set_tid_config = ieee80211_set_tid_config, .reset_tid_config = ieee80211_reset_tid_config, + .set_sar_specs = ieee80211_set_sar_specs, };net/wireless/nl80211.c +13
-0@@ -367,6 +367,19 @@ nl80211_tid_config_attr_policy[NL80211_TID_CONFIG_ATTR_MAX + 1] = { NLA_POLICY_NESTED(nl80211_txattr_policy), }; +static const struct nla_policy +sar_specs_policy[NL80211_SAR_ATTR_SPECS_MAX +1 ] = { + [NL80211_SAR_ATTR_SPECS_POWER ] = { .type =NLA_U8 }, + [NL80211_SAR_ATTR_SPECS_FREQ_RANGE_INDEX ] = +NLA_POLICY_MAX (NLA_U8 ,NUM_MAX_NL80211_SAR_FREQ_RANGES ), +}; + +static const struct nla_policy +sar_policy[NL80211_SAR_ATTR_MAX +1 ] = { + [NL80211_SAR_ATTR_TYPE ] =NLA_POLICY_MAX (NLA_U32 ,NUM_NL80211_SAR_TYPE ), + [NL80211_SAR_ATTR_SPECS ] =NLA_POLICY_NESTED_ARRAY (sar_specs_policy), +}; +static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR ] = {net/wireless/nl80211.c +1
-0[0] = { .strict_start_type = NL80211_ATTR_HE_OBSS_PD }, [NL80211_ATTR_WIPHY] = { .type = NLA_U32 },@@ -675,6 +688,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = { [NL80211_ATTR_SCAN_FREQ_KHZ] = { .type = NLA_NESTED }, [NL80211_ATTR_HE_6GHZ_CAPABILITY ] = NLA_POLICY_EXACT_LEN(sizeof(struct ieee80211_he_6ghz_capa)), + [NL80211_ATTR_SAR_SPEC] = NLA_POLICY_NESTED(sar_policy), };/* policy for the key attributes */
net/wireless/nl80211.c +2
-0@@ -1856,6 +1870,8 @@ static int nl80211_add_commands_unsplit(structcfg80211_registered_device *rdev, goto nla_put_failure; } +CMD (set_sar_specs,SET_SAR_SPECS ); +return i; nla_put_failure:net/wireless/nl80211.c +49
-0return -ENOBUFS ;@@ -2034,6 +2050,55 @@ nl80211_put_tid_config_support(struct cfg80211_registered_device *rdev, return -ENOBUFS ; } +static int +nl80211_put_sar_specs (struct cfg80211_registered_device *rdev, +struct sk_buff *msg) +{ +struct nlattr *sar_capa, *specs, *sub_freq_range; +u8 num_freq_ranges; +int i; + +if (!rdev->wiphy.sar_capa) +return 0 ; + + num_freq_ranges = rdev->wiphy.sar_capa->num_freq_ranges; + + sar_capa =nla_nest_start (msg,NL80211_ATTR_SAR_SPEC ); +if (!sar_capa) +return -ENOSPC ; + +if (nla_put_u16 (msg,NL80211_SAR_ATTR_TYPE , rdev->wiphy.sar_capa->type)) + goto fail; + + specs =nla_nest_start_noflag (msg,NL80211_SAR_ATTR_SPECS ); +if (!specs) + goto fail; + +/* report supported freq_ranges */ +for (i =0 ; i < num_freq_ranges; i++) { + sub_freq_range =nla_nest_start_noflag (msg, i +1 ); + +nla_put_u32 (msg,NL80211_SAR_ATTR_SPECS_START_FREQ , + rdev->wiphy.sar_capa->freq_ranges[i].start_freq); + +nla_put_u32 (msg,NL80211_SAR_ATTR_SPECS_END_FREQ , + rdev->wiphy.sar_capa->freq_ranges[i].end_freq); + +nla_put_u8 (msg,NL80211_SAR_ATTR_SPECS_FREQ_RANGE_INDEX , + rdev->wiphy.sar_capa->freq_ranges[i].index); + +nla_nest_end (msg, sub_freq_range); + } + +nla_nest_end (msg, specs); +nla_nest_end (msg, sar_capa); + +return 0 ; +fail: +nla_nest_cancel (msg, sar_capa); +return -ENOBUFS ; +} +struct nl80211_dump_wiphy_state {net/wireless/nl80211.c +3
-0s64 filter_wiphy;long start;@@ -2598,6 +2663,9 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev, if (nl80211_put_tid_config_support(rdev, msg)) goto nla_put_failure; +if (nl80211_put_sar_specs (rdev, msg)) + goto nla_put_failure; +/* done */ state->split_start =0 ;net/wireless/nl80211.c +97
-0break ;@@ -14473,6 +14541,103 @@ static void nl80211_post_doit(const struct genl_ops *ops, struct sk_buff *skb, } } +static int nl80211_set_sar_specs(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; +struct nlattr *spec[NL80211_SAR_ATTR_SPECS_MAX +1 ]; +struct nlattr *tb[NL80211_SAR_ATTR_MAX +1 ]; +struct cfg80211_sar_specs *sar_spec; +u8 type, power, index, specs; +struct nlattr *spec_list; +int rem, err; + +if (!rdev->wiphy.sar_capa) +return -EOPNOTSUPP ; + +if (!info->attrs[NL80211_ATTR_SAR_SPEC ]) +return -EINVAL ; + +nla_parse_nested (tb,NL80211_SAR_ATTR_MAX , info->attrs[NL80211_ATTR_SAR_SPEC ], + sar_policy, info->extack); + +if (!tb[NL80211_SAR_ATTR_TYPE ]) +return -EINVAL ; + + type =nla_get_u32 (tb[NL80211_SAR_ATTR_TYPE ]); + +if (!tb[NL80211_SAR_ATTR_SPECS ]) +return -EINVAL ; + + specs =0 ; +nla_for_each_nested (spec_list, tb[NL80211_SAR_ATTR_SPECS ], rem) + specs++; + + sar_spec =kzalloc (sizeof (*sar_spec) + + specs *sizeof (struct cfg80211_sar_sub_specs ), +GFP_KERNEL ); +if (!sar_spec) +return -ENOMEM ; + + sar_spec->sub_specs = (struct cfg80211_sar_sub_specs *) + ((char *)sar_spec +sizeof (*sar_spec)); + specs =0 ; + sar_spec->type = type; + +nla_for_each_nested (spec_list, tb[NL80211_SAR_ATTR_SPECS ], rem) { +if (nla_parse (spec, +NL80211_SAR_ATTR_SPECS_MAX , +nla_data (spec_list), +nla_len (spec_list), + sar_specs_policy, +NULL )) { + err = -EINVAL ; + goto error; + } + +/* for power type, power value must be presented */ +if (!spec[NL80211_SAR_ATTR_SPECS_POWER ] && + type ==NL80211_SAR_TYPE_POWER ) { + err = -EINVAL ; + goto error; + } + + power =nla_get_u8 (spec[NL80211_SAR_ATTR_SPECS_POWER ]); + sar_spec->sub_specs[specs].power = power; + +/* if NL80211_SAR_ATTR_SPECS_FREQ_RANGE_INDEX isn't present, +* then the power applies to all bands. But it's only valid +* for the first entry. +*/ +if (!spec[NL80211_SAR_ATTR_SPECS_FREQ_RANGE_INDEX ]) { +if (specs) { + err = -EINVAL ; + goto error; + }else { + sar_spec->sub_specs[specs].freq_range_index = +NL80211_SAR_ALL_FREQ_RNAGES ; + specs++; +break ; + } + } + + index =nla_get_u8 (spec[NL80211_SAR_ATTR_SPECS_FREQ_RANGE_INDEX ]); + sar_spec->sub_specs[specs].freq_range_index = index; + specs++; + } + + sar_spec->num_sub_specs = specs; + + rdev->cur_cmd_info = info; +if (rdev->ops->set_sar_specs) + err =rdev_set_sar_specs (rdev, sar_spec); +else + err = -EOPNOTSUPP ; + rdev->cur_cmd_info =NULL ; +error: +kfree (sar_spec); +return err; +} +static const struct
genl_opsnl80211_ops[] = {net/wireless/nl80211.c +8
-0{ .cmd = NL80211_CMD_GET_WIPHY,@@ -15331,6 +15496,14 @@ static const struct genl_ops nl80211_ops[] = { .internal_flags = NL80211_FLAG_NEED_NETDEV | NL80211_FLAG_NEED_RTNL, }, + { + .cmd = NL80211_CMD_SET_SAR_SPECS, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, + .doit = nl80211_set_sar_specs, + .flags = GENL_UNS_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | + NL80211_FLAG_NEED_RTNL, + }, };static struct genl_family nl80211_fam__ro_after_init = {net/wireless/rdev-ops.h +1
-0@@ -1356,4 +1356,16 @@ static inline int rdev_reset_tid_config(structcfg80211_registered_device *rdev, return ret; } +static inline int rdev_set_sar_specs(struct cfg80211_registered_device*rdev,
net/wireless/rdev-ops.h +11
-0+ struct cfg80211_sar_specs *sar) +{ +int ret; + +trace_rdev_set_sar_specs (&rdev->wiphy, sar); + ret = rdev->ops->set_sar_specs (&rdev->wiphy, sar); +trace_rdev_return_int (&rdev->wiphy, ret); + +return ret; +} +#endif /* __CFG80211_RDEV_OPS */ net/wireless/trace.h +19
-0@@ -3547,6 +3547,25 @@ TRACE_EVENT(rdev_reset_tid_config, TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", peer: " MAC_PR_FMT ", tids: 0x%x",WIPHY_PR_ARG ,NETDEV_PR_ARG ,MAC_PR_ARG (peer), __entry->tids) ); + +TRACE_EVENT (rdev_set_sar_specs, + TP_PROTO(struct wiphy *wiphy, struct cfg80211_sar_specs *sar), +TP_ARGS (wiphy, sar), +TP_STRUCT__entry ( + WIPHY_ENTRY + __field(u16, type) +__field (u16, num) + ), +TP_fast_assign ( + WIPHY_ASSIGN; + __entry->type = sar->type; + __entry->num = sar->num_sub_specs; + + ), +TP_printk (WIPHY_PR_FMT ", Set type:%d, num_specs:%d" , +WIPHY_PR_ARG , __entry->type, __entry->num) +); +#endif /* !__RDEV_OPS_TRACE || TRACE_HEADER_MULTI_READ */ #undef
TRACE_INCLUDE_PATH
--
2.7.4
Signature · 3 lines
ath11k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath11k
Quoted 2 lines · [email protected] writes:
Sorry, send to wrong ath11k list.
Let me resend to ath10k list for these 2 patches.
When you submit a new version mark it as "v2". Otherwise people don't know what's the latest version.
Signature · 8 lines
https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches -- ath11k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath11k
Quoted 11 lines · Carl Huang
include/net/cfg80211.h +11
-0+/** +* struct cfg80211_sar_capa - sar limit capability +* @type: it's set via power in 0.25dbm or other types +* @num_freq_ranges: number of frequency ranges +* @chan_ranges: memory to hold the channel ranges. +*/ +struct cfg80211_sar_capa { +enum nl80211_sar_type type; +u8 num_freq_ranges; +const struct cfg80211_sar_freq_ranges *freq_ranges; +};
...
include/net/cfg80211.h struct wiphy { · line 4975
Quoted 6 lines
u8 max_data_retry_count;include/net/cfg80211.h +2
-0+const struct cfg80211_sar_capa *sar_capa; +char priv[]__aligned(NETDEV_ALIGN) ; };
What are the ABI guarantees around a given driver/chip's 'sar_capa'? Do we guarantee that if the driver supports N ranges of certain bands, that it will always continue to support those bands? What if, for instance, ath10k grows a new set of subbands, supporting sub-sections of the 5GHz band -- does it still need to support both a contiguous [5, 5 + X] and a split [5, 5 + X/2], [5 + X/2, 5 + X]? Basically, do we intend to put the burden on user space to figure out how to map its power tables to the supported frequency band(s), or on the kernel, to support a backwards-compatible set of frequency ranges? The latter doesn't really work if you expect user space to always specify all ranges in a SET command.
To be clear, I'm not as worried about differences between chips or drivers (I expect that different driver or chips may have different range support); just about stability for a given chip.
Brian
Signature · 3 lines
ath11k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath11k
Quoted 32 lines · Brian Norris
Quoted 11 lines · Carl Huang
include/net/cfg80211.h +11
-0+/** +* struct cfg80211_sar_capa - sar limit capability +* @type: it's set via power in 0.25dbm or other types +* @num_freq_ranges: number of frequency ranges +* @chan_ranges: memory to hold the channel ranges. +*/ +struct cfg80211_sar_capa { +enum nl80211_sar_type type; +u8 num_freq_ranges; +const struct cfg80211_sar_freq_ranges *freq_ranges; +};...
include/net/cfg80211.h struct wiphy { · line 4975
Quoted 6 lines
u8 max_data_retry_count;include/net/cfg80211.h +2
-0+const struct cfg80211_sar_capa *sar_capa; +char priv[]__aligned(NETDEV_ALIGN) ; };What are the ABI guarantees around a given driver/chip's '
sar_capa'? Do we guarantee that if the driver supports N ranges of certain bands, that it will always continue to support those bands? What if, for instance, ath10k grows a new set of subbands, supporting sub-sections of the 5GHz band -- does it still need to support both a contiguous [5, 5 + X] and a split [5, 5 + X/2], [5 + X/2, 5 + X]? Basically, do we intend to put the burden on user space to figure out how to map its power tables to the supported frequency band(s), or on the kernel, to support a backwards-compatible set of frequency ranges? The latter doesn't really work if you expect user space to always specify all ranges in a SET command.
Quoted 4 lines
To be clear, I'm not as worried about differences between chips or drivers (I expect that different driver or chips may have different range support); just about stability for a given chip.
For a given chip(at least a QCOM chip), we don't see that the range will grow or change.
In addition, with current index-power SET method, it's hard for driver to know what the index mean given your example. Does the index mean [5,5 + x] or [5, 5 + x/2] ? So it's required for user-space to specify all the ranges.
The number of ranges is quite small, so the SET itself is not a problem to specify all.
Brian, are you fine that we go with this proposal? I'll send V2 based on the comments from Johannes and Abhishek.
Quoted 1 line
Brian
+ ath10k
[ I realize I replied to the "wrong" RFC v1; I fell trap to Kalle's note:
"When you submit a new version mark it as "v2". Otherwise people don't know what's the latest version." ]
Quoted 4 lines · Carl Huang
Quoted 3 lines · Brian Norris
What are the ABI guarantees around a given driver/chip's '
sar_capa'? Do we guarantee that if the driver supports N ranges of certain bands, that it will always continue to support those bands?
...
Quoted 2 lines
For a given chip(at least a QCOM chip), we don't see that the range will grow or change.
That's good to know. But that's not quite the same as an ABI guarantee.
Quoted 4 lines
In addition, with current index-power SET method, it's hard for driver to know what the index mean given your example. Does the index mean [5,5 + x] or [5, 5 + x/2] ? So it's required for user-space to specify all the ranges.
Well, we'd have to change the API (which is why I'm asking now) if we wanted the kernel to handle this gracefully. We'd have to retain the index (which, it sounds like you might be dropping if things go as Johannes suggested), so user space can continue to request the old range even if the driver also splits up a new range.
More explicitly, something like this:
Linux version A:
ath10k supports:
0: 2G band
1: 5G band
Linux version B:
ath10k supports:
0: 2G band
1: 5G band
2: 1st half of 5G band
3: 2nd half of 5G band
Indexes 2 and 3 would be overlapping with 1 of course, but it does mean that the following SET request will work on both A and B:
SET
index 0 -> power X
index 1 -> power Y
Notably, that also requires nl80211 allow specifying only a subset of bands in a SET request.
But spelling that out, the proposal sounds more complicated than it's worth -- it's probably better to let user space handle the complexity. So that goes back to making ABI requirements clear, so we don't have kernel/user mixups/regressions down the line.
Quoted 2 lines
The number of ranges is quite small, so the SET itself is not a problem to specify all.
Sure, but it does mean that if I (user space) don't trust that driver support remains constant, I have to do some negotiation. I would already do some verification via the get/dump API of course, but negotiation is pretty complex if there is unbounded flexibility. It would be nice to spell out what sort of negotiation is reasonable as part of the ABI. For example, it might be reasonable to say that bands should never be combined; only ever added or split.
BTW, considering the possibility of "added" bands, how about this
example: if ath10k were to add 6GHz support (and SAR to go with it), user space would have to learn to specify limits for it too, due to the "all or nothing" limitation? It'd be good to be up front about this, similar to the previous paragraph.
Quoted 2 lines
Brian, are you fine that we go with this proposal? I'll send V2 based on the comments from Johannes and Abhishek.
I think I'm fine with it; my main concerns around ambiguities, so maybe it just needs more explicit mentions in the docs (commit messages and/or comments). I'd be happy to see v2 and go from there.
Brian
Signature · 3 lines
ath11k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath11k
Quoted 9 lines · Brian Norris
+ ath10k
[ I realize I replied to the "wrong" RFC v1; I fell trap to Kalle's note:
"When you submit a new version mark it as "v2". Otherwise people don't know what's the latest version." ]
Quoted 1 line · Carl Huang
On 2020-11-04 10:00, Brian Norris wrote:
Quoted 8 lines
Quoted 3 lines
Quoted 3 lines
What are the ABI guarantees around a given driver/chip's '
sar_capa'? Do we guarantee that if the driver supports N ranges of certain bands, that it will always continue to support those bands?...
Quoted 2 lines
For a given chip(at least a QCOM chip), we don't see that the range will grow or change.
That's good to know. But that's not quite the same as an ABI guarantee.
I'm not sure if I understood Brian's question correctly, but I have concerns on the assumption that frequency ranges never change. For example, in ath10k we have a patch[1] under discussion which adds more channels and in ath11k we added 6 GHz band after initial ath11k support landed. And I would not be surprised if in some boards/platforms a certain band is disabled due to cotting costs (no antenna etc). My preference is to have a robust interface which would be designed to handle these kind of changes.
[1] [PATCH] ath10k: enable advertising support for channels 32, 68 and 98
Signature · 8 lines
https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 29 lines · Kalle Valo
Quoted 9 lines · Brian Norris
+ ath10k
[ I realize I replied to the "wrong" RFC v1; I fell trap to Kalle's note:
"When you submit a new version mark it as "v2". Otherwise people don't know what's the latest version." ]
Quoted 1 line · Carl Huang
On 2020-11-04 10:00, Brian Norris wrote:
Quoted 8 lines
Quoted 3 lines
Quoted 3 lines
What are the ABI guarantees around a given driver/chip's '
sar_capa'? Do we guarantee that if the driver supports N ranges of certain bands, that it will always continue to support those bands?...
Quoted 2 lines
For a given chip(at least a QCOM chip), we don't see that the range will grow or change.
That's good to know. But that's not quite the same as an ABI guarantee.
I'm not sure if I understood Brian's question correctly, but I have concerns on the assumption that frequency ranges never change. For example, in ath10k we have a patch[1] under discussion which adds more channels and in ath11k we added 6 GHz band after initial ath11k support landed. And I would not be surprised if in some boards/platforms a certain band is disabled due to cotting costs (no antenna etc). My preference is to have a robust interface which would be designed to handle these kind of changes.
Quoted 1 line
[1] [PATCH] ath10k: enable advertising support for channels 32, 68 and 98
So the trick here is even if more channels are supported, it doesn't mean that it can support different SAR setting on these new channels. In this case, it likely falls into 5G range. It's safe for driver to extend the 5G range and doesn't break userspace. (68 and 98 are already in the 5G range, so driver just extends the start edge freq to 32 here.).
But for flexibility, given 6 GHz as example here, let's keep the explicit index for SET command. For sar_capa advertisement, the explicit index is dropped as Johannes suggested. New ranges can only be appended to existing ones. Like Brian said, only add or split is allowed. The complexity to handle splitted range Vs whole range is left to WLAN driver itself.
Userspace can SET any ranges which are advertised by WLAN driver. It's not required to set all ranges and userspace can skip any ranges.
Quoted 8 lines · Carl Huang
Quoted 7 lines · Kalle Valo
Quoted 6 lines · Brian Norris
Quoted 4 lines · Carl Huang
Quoted 3 lines · Brian Norris
What are the ABI guarantees around a given driver/chip's '
sar_capa'? Do we guarantee that if the driver supports N ranges of certain bands, that it will always continue to support those bands?
To be clear: the answer here is "no." So we have to map out what the user/kernel interaction looks like when they change.
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
...
Quoted 2 lines
For a given chip(at least a QCOM chip), we don't see that the range will grow or change.
That's good to know. But that's not quite the same as an ABI guarantee.
Quoted 6 lines
Quoted 6 lines
I'm not sure if I understood Brian's question correctly, but I have concerns on the assumption that frequency ranges never change. For example, in ath10k we have a patch[1] under discussion which adds more channels and in ath11k we added 6 GHz band after initial ath11k support landed. And I would not be surprised if in some boards/platforms a certain band is disabled due to cotting costs (no antenna etc).
Right, I certainly was not taking the "never change bands" claim from Carl at face value ;) This is exactly why I was asking.
Quoted 3 lines
Quoted 3 lines
My
preference is to have a robust interface which would be designed to handle these kind of changes.
Sure.
Quoted 12 lines
Quoted 2 lines
[1] [PATCH] ath10k: enable advertising support for channels 32, 68 and 98
So the trick here is even if more channels are supported, it doesn't mean
that it can support different SAR setting on these new channels. In this case,
it likely falls into 5G range. It's safe for driver to extend the 5G range and
doesn't break userspace. (68 and 98 are already in the 5G range, so driver just
extends the start edge freq to 32 here.).
You can't just wave your hands and say it "doesn't break userspace" -- you have to think about how user space can use this API.
Specifically, consider that user space is not going to memorize indeces, as those are per-driver implementation details; it's going to memorize frequency bands. It wants to cross reference those with the results of the GET/DUMP API before it translates those into indeces for SET. As you're describing it, user space will have to have some kind of "fuzziness" to its logic -- today, it thinks the 5G band is [X,Y], but tomorrow it might expand to [X-N, Y+M]. So user space should just ensure that it configures any band that intersects with [X,Y], even though it didn't know about [X-N,X] or [Y,Y+M]? That logic covers splits too, I suppose.
There's still the question of ranges that user space has no knowledge of (i.e., no intersection with any known [X,Y]). I think there's two approaches that are roughly equivalent:
1) require SET operations to specify all bands, and designate a NULL or MAX value that user space should use for unknown/unconfigured bands [or, user space uses some kind of "extension" from the nearest known band, just to be safe?]
2) allow SET operations to specify a subset of supported bands [gray
area: what happens with the unconfigured band(s)? left as-is? use max?]
We're approximately in #1 right now. If we're explicit about how that's supposed to work, then I think we can stay with that. Although it sounds like Carl is moving toward #2 (allow subsets).
Quoted 10 lines
But for flexibility, given 6 GHz as example here, let's keep the explicit
index for SET command. Forsar_capaadvertisement, the explicit index is dropped as Johannes suggested. New ranges can only be appended to existing
ones. Like Brian said, only add or split is allowed.The complexity to
handle
splitted range Vs whole range is left to WLAN driver itself.
Hmm? I thought we're keeping the driver simple. I'm OK with that (and moving a little more complexity into user space) as long as we're clear about it.
Brian
Quoted 2 lines
Userspace can SET any ranges which are advertised by WLAN driver. It's not required to set all ranges and userspace can skip any ranges.
Signature · 3 lines
ath11k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath11k
Quoted 85 lines · Brian Norris
Quoted 8 lines · Carl Huang
Quoted 7 lines · Kalle Valo
Quoted 6 lines · Brian Norris
Quoted 4 lines · Carl Huang
Quoted 3 lines · Brian Norris
What are the ABI guarantees around a given driver/chip's '
sar_capa'? Do we guarantee that if the driver supports N ranges of certain bands, that it will always continue to support those bands?To be clear: the answer here is "no." So we have to map out what the user/kernel interaction looks like when they change.
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
...
Quoted 2 lines
For a given chip(at least a QCOM chip), we don't see that the range will grow or change.
That's good to know. But that's not quite the same as an ABI guarantee.
Quoted 6 lines
Quoted 6 lines
I'm not sure if I understood Brian's question correctly, but I have concerns on the assumption that frequency ranges never change. For example, in ath10k we have a patch[1] under discussion which adds more channels and in ath11k we added 6 GHz band after initial ath11k support landed. And I would not be surprised if in some boards/platforms a certain band is disabled due to cotting costs (no antenna etc).
Right, I certainly was not taking the "never change bands" claim from Carl at face value ;) This is exactly why I was asking.
Quoted 3 lines
Quoted 3 lines
My
preference is to have a robust interface which would be designed to handle these kind of changes.Sure.
Quoted 12 lines
Quoted 2 lines
[1] [PATCH] ath10k: enable advertising support for channels 32, 68 and 98
So the trick here is even if more channels are supported, it doesn't mean
that it can support different SAR setting on these new channels. In this case,
it likely falls into 5G range. It's safe for driver to extend the 5G range and
doesn't break userspace. (68 and 98 are already in the 5G range, so driver just
extends the start edge freq to 32 here.).You can't just wave your hands and say it "doesn't break userspace" -- you have to think about how user space can use this API.
Specifically, consider that user space is not going to memorize indeces, as those are per-driver implementation details; it's going to memorize frequency bands. It wants to cross reference those with the results of the GET/DUMP API before it translates those into indeces for SET. As you're describing it, user space will have to have some kind of "fuzziness" to its logic -- today, it thinks the 5G band is [X,Y], but tomorrow it might expand to [X-N, Y+M]. So user space should just ensure that it configures any band that intersects with [X,Y], even though it didn't know about [X-N,X] or [Y,Y+M]? That logic covers splits too, I suppose.
There's still the question of ranges that user space has no knowledge of (i.e., no intersection with any known [X,Y]). I think there's two approaches that are roughly equivalent:
1) require SET operations to specify all bands, and designate a NULL or MAX value that user space should use for unknown/unconfigured bands [or, user space uses some kind of "extension" from the nearest known band, just to be safe?]
2) allow SET operations to specify a subset of supported bands [gray
area: what happens with the unconfigured band(s)? left as-is? use max?]We're approximately in #1 right now. If we're explicit about how that's supposed to work, then I think we can stay with that. Although it sounds like Carl is moving toward #2 (allow subsets).
Quoted 6 lines
But for flexibility, given 6 GHz as example here, let's keep the explicit
index for SET command. Forsar_capaadvertisement, the explicit index is dropped as Johannes suggested. New ranges can only be appended to existing
ones. Like Brian said, only add or split is allowed.
Quoted 8 lines
Quoted 3 lines
The complexity to
handle
splitted range Vs whole range is left to WLAN driver itself.Hmm? I thought we're keeping the driver simple. I'm OK with that (and moving a little more complexity into user space) as long as we're clear about it.
I've sent [PATCH 0/3] add common API to configure SAR, please let's start from there again.
Quoted 9 lines
Brian
Quoted 2 lines
Userspace can SET any ranges which are advertised by WLAN driver. It's not required to set all ranges and userspace can skip any ranges.
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 69 lines · Brian Norris
+ ath10k
[ I realize I replied to the "wrong" RFC v1; I fell trap to Kalle's note:
"When you submit a new version mark it as "v2". Otherwise people don't know what's the latest version." ]
Quoted 4 lines · Carl Huang
Quoted 3 lines · Brian Norris
What are the ABI guarantees around a given driver/chip's '
sar_capa'? Do we guarantee that if the driver supports N ranges of certain bands, that it will always continue to support those bands?...
Quoted 2 lines
For a given chip(at least a QCOM chip), we don't see that the range will grow or change.
That's good to know. But that's not quite the same as an ABI guarantee.
Quoted 4 lines
In addition, with current index-power SET method, it's hard for driver to know what the index mean given your example. Does the index mean [5,5 + x] or [5, 5 + x/2] ? So it's required for user-space to specify all the ranges.
Well, we'd have to change the API (which is why I'm asking now) if we wanted the kernel to handle this gracefully. We'd have to retain the index (which, it sounds like you might be dropping if things go as Johannes suggested), so user space can continue to request the old range even if the driver also splits up a new range.
More explicitly, something like this:
Linux version A:
ath10k supports:
0: 2G band
1: 5G bandLinux version B:
ath10k supports:
0: 2G band
1: 5G band
2: 1st half of 5G band
3: 2nd half of 5G bandIndexes 2 and 3 would be overlapping with 1 of course, but it does mean that the following SET request will work on both A and B:
SET
index 0 -> power X
index 1 -> power YNotably, that also requires nl80211 allow specifying only a subset of bands in a SET request.
But spelling that out, the proposal sounds more complicated than it's worth -- it's probably better to let user space handle the complexity. So that goes back to making ABI requirements clear, so we don't have kernel/user mixups/regressions down the line.
Quoted 2 lines
The number of ranges is quite small, so the SET itself is not a problem to specify all.
Sure, but it does mean that if I (user space) don't trust that driver support remains constant, I have to do some negotiation. I would already do some verification via the get/dump API of course, but negotiation is pretty complex if there is unbounded flexibility. It would be nice to spell out what sort of negotiation is reasonable as part of the ABI. For example, it might be reasonable to say that bands should never be combined; only ever added or split.
Quoted 6 lines
BTW, considering the possibility of "added" bands, how about this
example: if ath10k were to add 6GHz support (and SAR to go with it), user space would have to learn to specify limits for it too, due to the "all or nothing" limitation? It'd be good to be up front about this, similar to the previous paragraph.
Like what I've replied in another email. Let's remove "all or nothing" limitation. If certain ranges are not SET, then these ranges just don't have SAR power limitation.
Just FYI, ath10k will never support 6GHz, it's ath11k to support it.
Quoted 8 lines
Quoted 2 lines
Brian, are you fine that we go with this proposal? I'll send V2 based on the comments from Johannes and Abhishek.
I think I'm fine with it; my main concerns around ambiguities, so maybe it just needs more explicit mentions in the docs (commit messages and/or comments). I'd be happy to see v2 and go from there.
Brian