ASoC: Intel: boards: Add CML_RT1015 m/c driver
Subsystems (3)
PATCH v3 1/1 ASoC: Intel: boards: Add CML_RT1015 m/c driver
From: Keith Tzeng <[email protected]>
Machine driver to enable RT5682 on SSP0, DMIC, HDMI and RT1015 AMP on
SSP1: Enabled 4 CH TDM playback with 24 bit data.
Signed-off-by Keith Tzeng <[email protected]>
--- sound/soc/intel/boards/Kconfig | 15 + sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/cml_rt1015_rt5682.c | 570 ++++++++++++++++++++++ sound/soc/intel/common/soc-acpi-intel-cnl-match.c | 7 + 4 files changed, 594 insertions(+) create mode 100644 sound/soc/intel/boards/cml_rt1015_rt5682.c
sound/soc/intel/boards/Kconfig +15 -0
@@ -496,6 +496,21 @@ config SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH Say Y if you have such a device. If unsure select "N". +config SND_SOC_INTEL_SOF_CML_RT1015_RT5682_MACH + tristate "CML with RT1015 and RT5682 in I2S Mode" + depends on I2C && ACPI && GPIOLIB + depends on MFD_INTEL_LPSS || COMPILE_TEST + depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC + select SND_SOC_RT1015 + select SND_SOC_RT5682_I2C + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC machine driver for SOF platform with + RT1015 + RT5682 I2S codec. + Say Y if you have such a device. + If unsure select "N". + endif ## SND_SOC_SOF_COMETLAKE && SND_SOC_SOF_HDA_LINK if SND_SOC_SOF_JASPERLAKE
sound/soc/intel/boards/Makefile +2 -0
@@ -20,6 +20,7 @@ snd-soc-sst-byt-cht-es8316-objs := bytcht_es8316.o snd-soc-sst-byt-cht-nocodec-objs := bytcht_nocodec.o snd-soc-sof_rt5682-objs := sof_rt5682.o hda_dsp_common.o sof_maxim_common.o snd-soc-cml_rt1011_rt5682-objs := cml_rt1011_rt5682.o hda_dsp_common.o +snd-soc-cml_rt1015_rt5682-objs := cml_rt1015_rt5682.o snd-soc-kbl_da7219_max98357a-objs := kbl_da7219_max98357a.o snd-soc-kbl_da7219_max98927-objs := kbl_da7219_max98927.o snd-soc-kbl_rt5663_max98927-objs := kbl_rt5663_max98927.o
@@ -60,6 +61,7 @@ obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH) += snd-soc-sst-byt-cht-da7213.o obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH) += snd-soc-sst-byt-cht-es8316.o obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) += snd-soc-sst-byt-cht-nocodec.o obj-$(CONFIG_SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH) += snd-soc-cml_rt1011_rt5682.o +obj-$(CONFIG_SND_SOC_INTEL_SOF_CML_RT1015_RT5682_MACH) += cml_rt1015_rt5682.o obj-$(CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH) += snd-soc-kbl_da7219_max98357a.o obj-$(CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH) += snd-soc-kbl_da7219_max98927.o obj-$(CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH) += snd-soc-kbl_rt5663_max98927.o
sound/soc/intel/boards/cml_rt1015_rt5682.c new file +570 -0
570 lines not on this page · raw message
sound/soc/intel/common/soc-acpi-intel-cnl-match.c +7 -0
@@ -23,6 +23,13 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cnl_machines[] = { .sof_fw_filename = "sof-cnl.ri", .sof_tplg_filename = "sof-cnl-rt274.tplg", }, + { + .id = "10EC1015", + .drv_name = "cml_rt1015_rt5682", + .quirk_data = &cml_codecs, + .sof_fw_filename = "sof-cnl.ri", + .sof_tplg_filename = "sof-cml-rt1015-rt5682.tplg", + }, {}, };EXPORT_SYMBOL_GPL (snd_soc_acpi_intel_cnl_machines);
Signature · 1 line
2.7.4
Quoted 4 lines · Keith Tzneg
From: Keith Tzeng <[email protected]>
Machine driver to enable RT5682 on SSP0, DMIC, HDMI and RT1015 AMP on
SSP1: Enabled 4 CH TDM playback with 24 bit data.
Same comment for the third time: there is no reason to add an entire machine driver just to replace one amplifier by another.
let's use an existing machine driver and use a quirk (DMI or table_id) to select the relevant amp for that device.