mips: mtmips: add support for MediaTek MT7620 SoC
Subsystems (3)
PATCH 5/18 mips: mtmips: add support for MediaTek MT7620 SoC
This patch adds support for MediaTek MT7620 SoC.
All files are dedicated for u-boot.
--- arch/mips/dts/mt7620-u-boot.dtsi | 38 +++ arch/mips/dts/mt7620.dtsi | 302 ++++++++++++++++++ arch/mips/mach-mtmips/Kconfig | 22 ++ arch/mips/mach-mtmips/Makefile | 1 + .../mach-mtmips/include/mach/mt7620-sysc.h | 54 ++++ arch/mips/mach-mtmips/mt7620/Kconfig | 54 ++++ arch/mips/mach-mtmips/mt7620/Makefile | 10 + arch/mips/mach-mtmips/mt7620/dram.c | 114 +++++++ arch/mips/mach-mtmips/mt7620/init.c | 185 +++++++++++ arch/mips/mach-mtmips/mt7620/lowlevel_init.S | 53 +++ arch/mips/mach-mtmips/mt7620/mt7620.h | 102 ++++++ arch/mips/mach-mtmips/mt7620/serial.c | 37 +++ arch/mips/mach-mtmips/mt7620/sysc.c | 171 ++++++++++ include/configs/mt7620.h | 46 +++ 14 files changed, 1189 insertions(+) create mode 100644 arch/mips/dts/mt7620-u-boot.dtsi create mode 100644 arch/mips/dts/mt7620.dtsi create mode 100644 arch/mips/mach-mtmips/include/mach/mt7620-sysc.h create mode 100644 arch/mips/mach-mtmips/mt7620/Kconfig create mode 100644 arch/mips/mach-mtmips/mt7620/Makefile create mode 100644 arch/mips/mach-mtmips/mt7620/dram.c create mode 100644 arch/mips/mach-mtmips/mt7620/init.c create mode 100644 arch/mips/mach-mtmips/mt7620/lowlevel_init.S create mode 100644 arch/mips/mach-mtmips/mt7620/mt7620.h create mode 100644 arch/mips/mach-mtmips/mt7620/serial.c create mode 100644 arch/mips/mach-mtmips/mt7620/sysc.c create mode 100644 include/configs/mt7620.h
arch/mips/dts/mt7620-u-boot.dtsi new file +38 -0
@@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 MediaTek Inc. + * + * Author: Weijie Gao <[email protected]> + */ + +&palmbus { + u-boot,dm-pre-reloc; +}; + +&sysc { + u-boot,dm-pre-reloc; +}; + +&uartlite { + u-boot,dm-pre-reloc; +}; + +&uartfull { + u-boot,dm-pre-reloc; +}; + +&reboot { + u-boot,dm-pre-reloc; +}; + +&clkctrl { + u-boot,dm-pre-reloc; +}; + +&rstctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +};
arch/mips/dts/mt7620.dtsi new file +302 -0
302 lines not on this page · raw message
arch/mips/mach-mtmips/Kconfig +22 -0
@@ -5,6 +5,7 @@ config SYS_MALLOC_F_LEN default 0x1000 config SYS_SOC + default "mt7620" if SOC_MT7620 default "mt7628" if SOC_MT7628 config SYS_DCACHE_SIZE
@@ -31,10 +32,30 @@ config SPL_PAYLOAD config BUILD_TARGET default "u-boot-with-spl.bin" if SPL + default "u-boot.bin" choice prompt "MediaTek MIPS SoC select" +config SOC_MT7620 + bool "MT7620" + select MIPS_L1_CACHE_SHIFT_5 + select SYS_MIPS_CACHE_INIT_RAM_LOAD + select PINCTRL_MT7620 + select MT7620_SERIAL + select SYSRESET_RESETCTL + select MISC + select SPL_SEPARATE_BSS if SPL + select SPL_LOADER_SUPPORT if SPL + select SPL_OF_CONTROL if SPL_DM + select SPL_SIMPLE_BUS if SPL_DM + select SPL_DM_SERIAL if SPL_DM + select SPL_CLK if SPL_DM && SPL_SERIAL_SUPPORT + select SPL_SYSRESET if SPL_DM + select SPL_OF_LIBFDT if SPL_OF_CONTROL + help + This supports MediaTek MT7620. + config SOC_MT7628 bool "MT7628" select MIPS_L1_CACHE_SHIFT_5
@@ -58,6 +79,7 @@ config SOC_MT7628 endchoice +source "arch/mips/mach-mtmips/mt7620/Kconfig" source "arch/mips/mach-mtmips/mt7628/Kconfig" endmenu
arch/mips/mach-mtmips/Makefile +1 -0
@@ -5,4 +5,5 @@ obj-y += ddr_init.o obj-y += ddr_cal.o obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_SOC_MT7620) += mt7620/ obj-$(CONFIG_SOC_MT7628) += mt7628/
arch/mips/mach-mtmips/include/mach/mt7620-sysc.h new file +54 -0
54 lines not on this page · raw message
arch/mips/mach-mtmips/mt7620/Kconfig new file +54 -0
54 lines not on this page · raw message
arch/mips/mach-mtmips/mt7620/Makefile new file +10 -0
@@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-y += lowlevel_init.o +obj-y += init.o +obj-y += dram.o +obj-y += serial.o + +ifndef CONFIG_SPL_BUILD +obj-y += sysc.o +endif
arch/mips/mach-mtmips/mt7620/dram.c new file +114 -0
114 lines not on this page · raw message
arch/mips/mach-mtmips/mt7620/init.c new file +185 -0
185 lines not on this page · raw message
arch/mips/mach-mtmips/mt7620/lowlevel_init.S new file +53 -0
53 lines not on this page · raw message
arch/mips/mach-mtmips/mt7620/mt7620.h new file +102 -0
102 lines not on this page · raw message
arch/mips/mach-mtmips/mt7620/serial.c new file +37 -0
@@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2020 MediaTek Inc. +* +* Author: Weijie Gao <[email protected]> +*/ + +#include <common.h> +#include <asm/io.h> +#include <asm/addrspace.h> +#include "mt7620.h" + +void board_debug_uart_init (void ) +{ +void __iomem *base =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); + +#if CONFIG_DEBUG_UART_BASE ==0xb0000500 /* KSEG1ADDR(UARTFULL_BASE) */ +clrsetbits_32 (base +SYSCTL_GPIOMODE_REG ,UARTF_SHARE_MODE_M , +UARTF_MODE_UARTF_GPIO <<UARTF_SHARE_MODE_S ); +#else +clrbits_32 (base +SYSCTL_GPIOMODE_REG ,UARTL_GPIO_MODE ); +#endif +} + +void mtmips_spl_serial_init (void ) +{ +#ifdef CONFIG_SPL_SERIAL_SUPPORT +void __iomem *base =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); + +#if CONFIG_CONS_INDEX ==1 +clrbits_32 (base +SYSCTL_GPIOMODE_REG ,UARTL_GPIO_MODE ); +#elif CONFIG_CONS_INDEX ==2 +clrsetbits_32 (base +SYSCTL_GPIOMODE_REG ,UARTF_SHARE_MODE_M , +UARTF_MODE_UARTF_GPIO <<UARTF_SHARE_MODE_S ); +#endif +#endif /* CONFIG_SPL_SERIAL_SUPPORT */ +}
arch/mips/mach-mtmips/mt7620/sysc.c new file +171 -0
171 lines not on this page · raw message
include/configs/mt7620.h new file +46 -0
46 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH 5/18 mips: mtmips: add support for MediaTek MT7620 SoC
Am Freitag, den 16.10.2020, 15:35 +0800 schrieb Weijie Gao:
Quoted 588 lines
This patch adds support for MediaTek MT7620 SoC.
All files are dedicated for u-boot.Signed-off-by Weijie Gao <[email protected]>--- arch/mips/dts/mt7620-u-boot.dtsi | 38 +++ arch/mips/dts/mt7620.dtsi | 302 ++++++++++++++++++ arch/mips/mach-mtmips/Kconfig | 22 ++ arch/mips/mach-mtmips/Makefile | 1 + .../mach-mtmips/include/mach/mt7620-sysc.h | 54 ++++ arch/mips/mach-mtmips/mt7620/Kconfig | 54 ++++ arch/mips/mach-mtmips/mt7620/Makefile | 10 + arch/mips/mach-mtmips/mt7620/dram.c | 114 +++++++ arch/mips/mach-mtmips/mt7620/init.c | 185 +++++++++++ arch/mips/mach-mtmips/mt7620/lowlevel_init.S | 53 +++ arch/mips/mach-mtmips/mt7620/mt7620.h | 102 ++++++ arch/mips/mach-mtmips/mt7620/serial.c | 37 +++ arch/mips/mach-mtmips/mt7620/sysc.c | 171 ++++++++++ include/configs/mt7620.h | 46 +++ 14 files changed, 1189 insertions(+) create mode 100644 arch/mips/dts/mt7620-u-boot.dtsi create mode 100644 arch/mips/dts/mt7620.dtsi create mode 100644 arch/mips/mach-mtmips/include/mach/mt7620-sysc.h create mode 100644 arch/mips/mach-mtmips/mt7620/Kconfig create mode 100644 arch/mips/mach-mtmips/mt7620/Makefile create mode 100644 arch/mips/mach-mtmips/mt7620/dram.c create mode 100644 arch/mips/mach-mtmips/mt7620/init.c create mode 100644 arch/mips/mach-mtmips/mt7620/lowlevel_init.S create mode 100644 arch/mips/mach-mtmips/mt7620/mt7620.h create mode 100644 arch/mips/mach-mtmips/mt7620/serial.c create mode 100644 arch/mips/mach-mtmips/mt7620/sysc.c create mode 100644 include/configs/mt7620.harch/mips/dts/mt7620-u-boot.dtsi new file +38
-0@@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 MediaTek Inc. + * + * Author: Weijie Gao <[email protected]> + */ + +&palmbus { + u-boot,dm-pre-reloc; +}; + +&sysc { + u-boot,dm-pre-reloc; +}; + +&uartlite { + u-boot,dm-pre-reloc; +}; + +&uartfull { + u-boot,dm-pre-reloc; +}; + +&reboot { + u-boot,dm-pre-reloc; +}; + +&clkctrl { + u-boot,dm-pre-reloc; +}; + +&rstctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +};arch/mips/dts/mt7620.dtsi new file +302
-0@@ -0,0 +1,302 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/clock/mt7620-clk.h> +#include <dt-bindings/reset/mt7620-reset.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mediatek,mt7620-soc"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu at 0 { + compatible = "mti,mips24KEc"; + device_type = "cpu"; + reg = <0>; + }; + }; + + clk48m: clk48m at 0 { + compatible = "fixed-clock"; + + clock-frequency = <48000000>; + + #clock-cells = <0>; + }; + + palmbus: palmbus at 10000000 { + compatible = "palmbus", "simple-bus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1fffff>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc: sysc at 0 { + compatible = "mediatek,mt7620-sysc"; + reg = <0x0 0x100>; + }; + + clkctrl: clkctrl at 0x30 { + compatible = "mediatek,mt7620-clk"; + mediatek,sysc = <&sysc>; + + #clock-cells = <1>; + u-boot,dm-pre-reloc; + }; + + rstctrl: rstctrl at 0x34 { + compatible = "mediatek,mtmips-reset"; + reg = <0x34 0x4>; + #reset-cells = <1>; + }; + + reboot: resetctl-reboot { + compatible = "resetctl-reboot"; + + resets = <&rstctrl SYS_RST>; + reset-names = "sysreset"; + }; + + uartfull: uartfull at 500 { + compatible = "mediatek,mt7620-uart"; + reg = <0x500 0x100>; + + pinctrl-names = "default"; + pinctrl-0 = <&uartf_gpio_pins>; + + clocks = <&clkctrl CLK_UARTF>; + + resets = <&rstctrl UARTF_RST>; + reset-names = "uartf"; + + status = "disabled"; + }; + + uartlite: uartlite at c00 { + compatible = "mediatek,mt7620-uart"; + reg = <0xc00 0x100>; + + pinctrl-names = "default"; + pinctrl-0 = <&uartl_pins>; + + clocks = <&clkctrl CLK_UARTL>; + + resets = <&rstctrl UARTL_RST>; + reset-names = "uartl"; + }; + + pinctrl: pinctrl at 60 { + compatible = "mediatek,mt7620-pinctrl"; + reg = <0x60 0x4>; + + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pin_state { + sutif_pins { + groups = "sutif"; + function = "none"; + }; + }; + + nand_pins: nand_pins { + groups = "nand"; + function = "nand"; + }; + + sd_pins: sd_pins { + groups = "nand"; + function = "sd"; + }; + + spi_single_pins: spi_single_pins { + groups = "spi"; + function = "spi"; + }; + + spi_dual_pins: spi_dual_pins { + spi_master_pins { + groups = "spi"; + function = "spi"; + }; + + spi_cs1_pin { + groups = "spi cs1"; + function = "spi cs1"; + }; + }; + + uartl_pins: uartl_pins { + groups = "uartl"; + function = "uartl"; + }; + + uartf_pins: uartf_pins { + groups = "uartf"; + function = "uartf"; + }; + + uartf_pcm_pins: uartf_pcm_pins { + groups = "uartf"; + function = "uartf pcm"; + }; + + uartf_i2s_pins: uartf_i2s_pins { + groups = "uartf"; + function = "i2s uartf"; + }; + + uartf_gpio_pins: uartf_gpio_pins { + groups = "uartf"; + function = "uartf gpio"; + }; + }; + + watchdog: watchdog at 120 { + compatible = "mediatek,mt7620-wdt"; + reg = <0x120 0x10>; + + resets = <&rstctrl TIMER_RST>; + reset-names = "wdt"; + }; + + gpio0: gpio0 at 600 { + compatible = "mediatek,mt7620-gpio"; + reg = <0x600 0x34>; + + resets = <&rstctrl PIO_RST>; + reset-names = "pio"; + + mediatek,bank-name = "PIOA"; + mediatek,gpio-num = <24>; + mediatek,register-map = <0x20 0x24 0x2c 0x30>; + + gpio-controller; + #gpio-cells = <2>; + }; + + gpio1: gpio1 at 638 { + compatible = "mediatek,mt7620-gpio"; + reg = <0x638 0x24>; + + resets = <&rstctrl PIO_RST>; + reset-names = "pio"; + + mediatek,bank-name = "PIOB"; + mediatek,gpio-num = <16>; + mediatek,register-map = <0x10 0x14 0x1c 0x20>; + + gpio-controller; + #gpio-cells = <2>; + }; + + gpio2: gpio2 at 660 { + compatible = "mediatek,mt7620-gpio"; + reg = <0x660 0x24>; + + resets = <&rstctrl PIO_RST>; + reset-names = "pio"; + + mediatek,bank-name = "PIOC"; + mediatek,gpio-num = <32>; + mediatek,register-map = <0x10 0x14 0x1c 0x20>; + + gpio-controller; + #gpio-cells = <2>; + }; + + gpio3: gpio3 at 688 { + compatible = "mediatek,mt7620-gpio"; + reg = <0x688 0x24>; + + resets = <&rstctrl PIO_RST>; + reset-names = "pio"; + + mediatek,bank-name = "PIOD"; + mediatek,gpio-num = <1>; + mediatek,register-map = <0x10 0x14 0x1c 0x20>; + + gpio-controller; + #gpio-cells = <2>; + }; + + spi0: spi at b00 { + compatible = "mediatek,mt7620-spi"; + reg = <0xb00 0x100>; + + pinctrl-names = "default"; + pinctrl-0 = <&spi_single_pins>; + + resets = <&rstctrl SPI_RST>; + reset-names = "spi"; + + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&clkctrl CLK_SPI>; + }; + }; + + eth: eth at 10100000 { + compatible = "mediatek,mt7620-eth"; + reg = <0x10100000 0x10000 + 0x10110000 0x8000>; + reg-names = "fe", "esw"; + + mediatek,sysc = <&sysc>; + + resets = <&rstctrl EPHY_RST>, + <&rstctrl ESW_RST>, + <&rstctrl FE_RST>; + reset-names = "ephy", "esw", "fe"; + + clocks = <&clkctrl CLK_EPHY>, + <&clkctrl CLK_ESW>, + <&clkctrl CLK_FE>; + clock-names = "ephy", "esw", "fe"; + + status = "disabled"; + }; + + usb_phy: mt7620-usb-phy { + compatible = "mediatek,mt7620-usbphy"; + + #phy-cells = <0>; + + mediatek,sysc = <&sysc>; + + clocks = <&clkctrl CLK_UPHY_48M>, <&clkctrl CLK_UPHY_12M>; + clock-names = "uphy48m", "uphy12m"; + + resets = <&rstctrl UHST_RST>, <&rstctrl UDEV_RST>; + reset-names = "uhst", "udev"; + }; + + ehci at 101c0000 { + compatible = "generic-ehci"; + reg = <0x101c0000 0x1000>; + + phys = <&usb_phy>; + phy-names = "usb"; + }; + + mmc: mmc at 10130000 { + compatible = "mediatek,mt7620-mmc"; + reg = <0x10130000 0x4000>; + builtin-cd = <1>; + r_smpl = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd_pins>; + + clocks = <&clk48m>, <&clkctrl CLK_SDHC>; + clock-names = "source", "hclk"; + + resets = <&rstctrl SDHC_RST>; + + status = "disabled"; + }; +};arch/mips/mach-mtmips/Kconfig +22
-0@@ -5,6 +5,7 @@ config SYS_MALLOC_F_LEN default 0x1000 config SYS_SOC + default "mt7620" if SOC_MT7620 default "mt7628" if SOC_MT7628 config SYS_DCACHE_SIZE@@ -31,10 +32,30 @@ config SPL_PAYLOAD config BUILD_TARGET default "u-boot-with-spl.bin" if SPL + default "u-boot.bin" choice prompt "MediaTek MIPS SoC select" +config SOC_MT7620 + bool "MT7620" + select MIPS_L1_CACHE_SHIFT_5 + select SYS_MIPS_CACHE_INIT_RAM_LOAD + select PINCTRL_MT7620 + select MT7620_SERIAL + select SYSRESET_RESETCTL + select MISC + select SPL_SEPARATE_BSS if SPL + select SPL_LOADER_SUPPORT if SPL + select SPL_OF_CONTROL if SPL_DM + select SPL_SIMPLE_BUS if SPL_DM + select SPL_DM_SERIAL if SPL_DM + select SPL_CLK if SPL_DM && SPL_SERIAL_SUPPORT + select SPL_SYSRESET if SPL_DM + select SPL_OF_LIBFDT if SPL_OF_CONTROL + help + This supports MediaTek MT7620. + config SOC_MT7628 bool "MT7628" select MIPS_L1_CACHE_SHIFT_5@@ -58,6 +79,7 @@ config SOC_MT7628 endchoice +source "arch/mips/mach-mtmips/mt7620/Kconfig" source "arch/mips/mach-mtmips/mt7628/Kconfig" endmenuarch/mips/mach-mtmips/Makefile +1
-0@@ -5,4 +5,5 @@ obj-y += ddr_init.o obj-y += ddr_cal.o obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_SOC_MT7620) += mt7620/ obj-$(CONFIG_SOC_MT7628) += mt7628/arch/mips/mach-mtmips/include/mach/mt7620-sysc.h new file +54
-0@@ -0,0 +1,54 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2020 MediaTek Inc. +* +* Author: Weijie Gao <[email protected]> +* +* Definitions of ioctl requests of MT7620 sysc driver +*/ + +#ifndef _MT7620_SYSC_H_ +#define _MT7620_SYSC_H_ + +#include <linux/types.h> + +enum mt7620_sysc_requests { +MT7620_SYSC_IOCTL_GET_CLK , +MT7620_SYSC_IOCTL_GET_CHIP_REV , +MT7620_SYSC_IOCTL_SET_GE1_MODE , +MT7620_SYSC_IOCTL_SET_GE2_MODE , +MT7620_SYSC_IOCTL_SET_USB_MODE , +MT7620_SYSC_IOCTL_SET_PCIE_MODE +}; + +struct mt7620_sysc_clks { +u32 cpu_clk; +u32 sys_clk; +u32 xtal_clk; +u32 peri_clk; +}; + +struct mt7620_sysc_chip_rev { +bool bga; +u32 ver :4 ; +u32 eco :4 ; +}; + +enum mt7620_sysc_ge_mode { +MT7620_SYSC_GE_RGMII , +MT7620_SYSC_GE_MII , +MT7620_SYSC_GE_RMII , +MT7620_SYSC_GE_ESW_PHY , +}; + +enum mt7620_sysc_usb_mode { +MT7620_SYSC_USB_DEVICE_MODE , +MT7620_SYSC_USB_HOST_MODE +}; + +enum mt7620_sysc_pcie_mode { +MT7620_SYSC_PCIE_EP_MODE , +MT7620_SYSC_PCIE_RC_MODE +}; + +#endif /* _MT7620_SYSC_H_ */ arch/mips/mach-mtmips/mt7620/Kconfig new file +54
-0@@ -0,0 +1,54 @@ + +if SOC_MT7620 + +config DEBUG_UART_BOARD_INIT + default y + +choice + prompt "Board select" + +endchoice + +choice + prompt "CPU frequency select" + default CPU_FREQ_580MHZ + +config CPU_FREQ_480MHZ + bool "480MHz" + +config CPU_FREQ_500MHZ + bool "500MHz" + +config CPU_FREQ_520MHZ + bool "520MHz" + +config CPU_FREQ_540MHZ + bool "540MHz" + +config CPU_FREQ_560MHZ + bool "560MHz" + +config CPU_FREQ_580MHZ + bool "580MHz" + +config CPU_FREQ_600MHZ + bool "600MHz" + +config CPU_FREQ_620MHZ + bool "620MHz" + +endchoice + +config CPU_FREQ_MULTI + int + range 0 7 + default 0 if CPU_FREQ_480MHZ + default 1 if CPU_FREQ_500MHZ + default 2 if CPU_FREQ_520MHZ + default 3 if CPU_FREQ_540MHZ + default 4 if CPU_FREQ_560MHZ + default 5 if CPU_FREQ_580MHZ + default 6 if CPU_FREQ_600MHZ + default 7 if CPU_FREQ_620MHZ + +endifarch/mips/mach-mtmips/mt7620/Makefile new file +10
-0@@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-y += lowlevel_init.o +obj-y += init.o +obj-y += dram.o +obj-y += serial.o + +ifndef CONFIG_SPL_BUILD +obj-y += sysc.o +endifarch/mips/mach-mtmips/mt7620/dram.c new file +0
-0
arch/mips/mach-mtmips/mt7620/dram.c line 8
Quoted 8 lines
arch/mips/mach-mtmips/mt7620/dram.c new file +8
-0@@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2020 MediaTek Inc. All Rights Reserved. +* +* Author: Weijie Gao <[email protected]> +*/ + +#include <common.h>
please try to avoid common.h in new code and directly use required header files. I think you just additionallyneed asm/io.h. There is ongoing work of refactoring and cleanup of common.h by Simon Glass.
Quoted 470 lines
arch/mips/mach-mtmips/mt7620/dram.c new file +106
-0+#include <asm/addrspace.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/sizes.h> +#include <linux/io.h> +#include <mach/ddr.h> +#include <mach/mc.h> +#include "mt7620.h" + +/* SDR parameters */ +#define SDR_CFG0_VAL 0x51B283B3 +#define SDR_CFG1_VAL 0xC00003A9 + +/* DDR2 DQ_DLY */ +#define DDR2_DQ_DLY 0x88888888 + +/* DDR2 DQS_DLY */ +#define DDR2_DQS_DLY 0x88888888 + +static const struct mc_ddr_cfg ddr1_cfgs_200mhz[] = { + [DRAM_8MB ] = {0x34A1EB94 ,0x20262324 ,0x28000033 ,0x00000002 ,0x00000000 }, + [DRAM_16MB ] = {0x34A1EB94 ,0x202A2324 ,0x28000033 ,0x00000002 ,0x00000000 }, + [DRAM_32MB ] = {0x34A1E5CA ,0x202E2324 ,0x28000033 ,0x00000002 ,0x00000000 }, + [DRAM_64MB ] = {0x3421E5CA ,0x20322324 ,0x28000033 ,0x00000002 ,0x00000000 }, + [DRAM_128MB ] = {0x241B05CA ,0x20362334 ,0x28000033 ,0x00000002 ,0x00000000 }, +}; + +static const struct mc_ddr_cfg ddr1_cfgs_160mhz[] = { + [DRAM_8MB ] = {0x239964A1 ,0x20262323 ,0x00000033 ,0x00000002 ,0x00000000 }, + [DRAM_16MB ] = {0x239964A1 ,0x202A2323 ,0x00000033 ,0x00000002 ,0x00000000 }, + [DRAM_32MB ] = {0x239964A1 ,0x202E2323 ,0x00000033 ,0x00000002 ,0x00000000 }, + [DRAM_64MB ] = {0x239984A1 ,0x20322323 ,0x00000033 ,0x00000002 ,0x00000000 }, + [DRAM_128MB ] = {0x239AB4A1 ,0x20362333 ,0x00000033 ,0x00000002 ,0x00000000 }, +}; + +static const struct mc_ddr_cfg ddr2_cfgs_200mhz[] = { + [DRAM_32MB ] = {0x2519E2E5 ,0x222E2323 ,0x68000C43 ,0x00000416 ,0x0000000A }, + [DRAM_64MB ] = {0x249AA2E5 ,0x22322323 ,0x68000C43 ,0x00000416 ,0x0000000A }, + [DRAM_128MB ] = {0x249B42E5 ,0x22362323 ,0x68000C43 ,0x00000416 ,0x0000000A }, + [DRAM_256MB ] = {0x249CE2E5 ,0x223A2323 ,0x68000C43 ,0x00000416 ,0x0000000A }, +}; + +static const struct mc_ddr_cfg ddr2_cfgs_160mhz[] = { + [DRAM_32MB ] = {0x23918250 ,0x222E2322 ,0x40000A43 ,0x00000416 ,0x00000006 }, + [DRAM_64MB ] = {0x239A2250 ,0x22322322 ,0x40000A43 ,0x00000416 ,0x00000008 }, + [DRAM_128MB ] = {0x2392A250 ,0x22362322 ,0x40000A43 ,0x00000416 ,0x00000008 }, + [DRAM_256MB ] = {0x24140250 ,0x223A2322 ,0x40000A43 ,0x00000416 ,0x00000008 }, +}; + +static void mt7620_memc_reset (int assert) +{ +void __iomem *sysc =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); + +if (assert) +setbits_32 (sysc +SYSCTL_RSTCTL_REG ,MC_RST ); +else +clrbits_32 (sysc +SYSCTL_RSTCTL_REG ,MC_RST ); +} + +void mt7620_dram_init (void ) +{ +void __iomem *sysc; +bool lspd = false; +int ddr_type, aux; +struct mc_ddr_init_param param; + + sysc =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); + ddr_type = (readl (sysc +SYSCTL_SYSCFG0_REG ) &DRAM_TYPE_M ) + >>DRAM_TYPE_S ; + aux =readl (sysc +SYSCTL_CPLL_CFG1_REG ) & + (CPU_CLK_AUX1 |CPU_CLK_AUX0 ); + +if (aux ==CPU_CLK_AUX1 || aux ==CPU_CLK_AUX0 ) + lspd = true; + +mt7620_memc_reset (1 ); +__udelay (200 ); + + param.memc =ioremap_nocache (MEMCTL_BASE ,MEMCTL_SIZE ); + param.dq_dly =DDR2_DQ_DLY ; + param.dqs_dly =DDR2_DQS_DLY ; + param.mc_reset = mt7620_memc_reset; + param.memsize =0 ; + param.bus_width =0 ; + +if (ddr_type ==DRAM_DDR1 ) { +if (lspd) + param.cfgs = ddr1_cfgs_160mhz; +else + param.cfgs = ddr1_cfgs_200mhz; + +ddr1_init (¶m); + }else if (ddr_type ==DRAM_DDR2 ) { +if (lspd) + param.cfgs = ddr2_cfgs_160mhz; +else + param.cfgs = ddr2_cfgs_200mhz; + +ddr2_init (¶m); + }else { + param.sdr_cfg0 =SDR_CFG0_VAL ; + param.sdr_cfg1 =SDR_CFG1_VAL ; + +sdr_init (¶m); + } +}arch/mips/mach-mtmips/mt7620/init.c new file +185
-0@@ -0,0 +1,185 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2020 MediaTek Inc. All Rights Reserved. +* +* Author: Weijie Gao <[email protected]> +*/ + +#include <config.h> +#include <asm/global_data.h> +#include <linux/io.h> +#include "mt7620.h" + +DECLARE_GLOBAL_DATA_PTR ; + +static const char *const dram_type[] = { +"SDRAM" ,"DDR" ,"DDR2" ,"SDRAM" +}; + +static const char *const boot_mode[(CHIP_MODE_M >>CHIP_MODE_S ) +1 ] = { + [1 ] ="NAND 4-cycles 2KB-page" , + [2 ] ="SPI-NOR 3-Byte Addr" , + [3 ] ="SPI-NOR 4-Byte Addr" , + [10 ] ="NAND 4-cycles 512B-page" , + [11 ] ="NAND 5-cycles 2KB-page" , + [12 ] ="NAND 3-cycles 512B-page" , +}; + +static void cpu_pll_init (void ) +{ +void __iomem *sysc =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); +u32 pllmul =CONFIG_CPU_FREQ_MULTI ; + +/* Make sure the pll multiplier is valid */ +if (pllmul >7 ) + pllmul =7 ; + +/* Set init CPU clock to 480MHz */ +clrsetbits_32 (sysc +SYSCTL_CPLL_CFG1_REG ,CPU_CLK_AUX1 ,CPU_CLK_AUX0 ); + +/* Enable software control of CPU PLL */ +setbits_32 (sysc +SYSCTL_CPLL_CFG0_REG ,CPLL_SW_CFG ); + +/* CPU PLL power down */ +setbits_32 (sysc +SYSCTL_CPLL_CFG1_REG ,CPLL_PD ); + +/* PLL configuration */ +clrsetbits_32 (sysc +SYSCTL_CPLL_CFG0_REG ,PLL_MULT_RATIO_M | +PLL_DIV_RATIO_M |SSC_UP_BOUND_M |SSC_EN , + (pllmul <<PLL_MULT_RATIO_S ) |SSC_SWING_M ); + +/* CPU PLL power up */ +clrbits_32 (sysc +SYSCTL_CPLL_CFG1_REG ,CPLL_PD ); + +/* Wait for CPU PLL locked */ +while (!(readl (sysc +SYSCTL_CPLL_CFG1_REG ) &CPLL_LD )) + ; + +/* Set final CPU clock source */ +clrbits_32 (sysc +SYSCTL_CPLL_CFG1_REG ,CPU_CLK_AUX1 |CPU_CLK_AUX0 ); + +/* Adjust CPU clock */ +clrsetbits_32 (sysc +SYSCTL_CPU_SYS_CLKCFG_REG , +CPU_FDIV_M |CPU_FFRAC_M , + (1 <<CPU_FDIV_S ) | (1 <<CPU_FFRAC_S )); +} + +void mt7620_init (void ) +{ +u32 cpu_clk; + +cpu_pll_init (); + +/* +* Set timer freq, which will be used during DRAM initialization +* Note that this function is using a temporary gd which will be +* destroyed after leaving this function. +*/ +mt7620_get_clks (&cpu_clk,NULL ,NULL ); + gd->arch.timer_freq = cpu_clk /2 ; + +mt7620_dram_init (); +} + +void mt7620_get_clks (u32 *cpu_clk,u32 *sys_clk,u32 *xtal_clk) +{ +void __iomem *sysc =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); +u32 val, multi, div, fdiv, ffrac, dram_type, sys_div; +u32 cpu_freq, xtal_freq; + +static const u32 div_ratio_table[] = {2 ,3 ,4 ,8 }; + + val =readl (sysc +SYSCTL_SYSCFG0_REG ); + + dram_type = (val &DRAM_TYPE_M ) >>DRAM_TYPE_S ; + +if (val &XTAL_FREQ_SEL ) + xtal_freq =40000000 ; +else + xtal_freq =20000000 ; + + val =readl (sysc +SYSCTL_CPLL_CFG1_REG ); +if (val &CPU_CLK_AUX1 ) { + cpu_freq = xtal_freq; + }else if (val &CPU_CLK_AUX0 ) { + cpu_freq =480000000 ; + }else { + val =readl (sysc +SYSCTL_CPLL_CFG0_REG ); +if (val &CPLL_SW_CFG ) { + multi = (val &PLL_MULT_RATIO_M ) >>PLL_MULT_RATIO_S ; + div = (val &PLL_DIV_RATIO_M ) >>PLL_DIV_RATIO_S ; + cpu_freq = (multi +24 ) *40000000 / + div_ratio_table[div]; + }else { + cpu_freq =600000000 ; + } + } + + val =readl (sysc +SYSCTL_CUR_CLK_STS_REG ); + ffrac = (val &CUR_CPU_FFRAC_M ) >>CUR_CPU_FFRAC_S ; + fdiv = (val &CUR_CPU_FDIV_M ) >>CUR_CPU_FDIV_S ; + cpu_freq = (cpu_freq * ffrac) / fdiv; + +switch (dram_type) { +case DRAM_SDRAM_E1 : + sys_div =4 ; +break ; +case DRAM_DDR1 : +case DRAM_DDR2 : + sys_div =3 ; +break ; +case DRAM_SDRAM : + sys_div =5 ; +break ; + } + +if (cpu_clk) + *cpu_clk = cpu_freq; + +if (sys_clk) + *sys_clk = cpu_freq / sys_div; + +if (xtal_clk) + *xtal_clk = xtal_freq; +} + +int print_cpuinfo (void ) +{ +void __iomem *sysc =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); +u32 cpu_clk, bus_clk, xtal_clk; +u32 val, ver, eco, pkg, dram, chipmode; +const char *bootdev; + + val =readl (sysc +SYSCTL_CHIP_REV_ID_REG ); + ver = (val &VER_M ) >>VER_S ; + eco = (val &ECO_M ) >>ECO_S ; + pkg = !!(val &PKG_ID ); + + val =readl (sysc +SYSCTL_SYSCFG0_REG ); + dram = (val &DRAM_TYPE_M ) >>DRAM_TYPE_S ; + chipmode = (val &CHIP_MODE_M ) >>CHIP_MODE_S ; + + bootdev = boot_mode[chipmode]; +if (!bootdev) + bootdev ="Unsupported boot mode" ; + +printf ("CPU: MediaTek MT7620%c ver:%u eco:%u\n" , + pkg ?'A' :'N' , ver, eco); + +printf ("Boot: %s, %s\n" , dram_type[dram], bootdev); + +mt7620_get_clks (&cpu_clk, &bus_clk, &xtal_clk); + +/* Set final timer frequency */ + gd->arch.timer_freq = cpu_clk /2 ; + +printf ("Clock: CPU: %uMHz, Bus: %uMHz, XTAL: %uMHz\n" , + cpu_clk /1000000 , bus_clk /1000000 , xtal_clk /1000000 ); + +return 0 ; +} + +ulong notrace get_tbclk(void) +{ +return gd->arch.timer_freq; +}arch/mips/mach-mtmips/mt7620/lowlevel_init.S new file +53
-0@@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2020 MediaTek Inc. + * + * Author: Weijie Gao <[email protected]> + */ + +#include <config.h> +#include <asm-offsets.h> +#include <asm/regdef.h> +#include <asm/asm.h> + + .set noreorder + +NESTED(lowlevel_init, 0, ra) + /* Save ra and do real lowlevel initialization */ + move s0, ra + + /* + * Use SRAM from 802.11n MAC/BBP, 16KiB (0x10184000 ~ 0x10187fff) + * NOTE: non-word operations may fail in this SRAM. + * Use it as stack only for CPU/DRAM init which only has word operations. + */ + PTR_LI sp, 0xb0187f00 + + /* We still need a temporary gd for udelay */ + PTR_SUBU \ + sp, sp, GD_SIZE # reserve space for gd + li t0, -16 + and sp, sp, t0 # force 16 byte alignment + move k0, sp # save gd pointer + + move fp, sp + + /* Clear gd */ + move t0, k0 +1: + PTR_S zero, 0(t0) + PTR_ADDIU t0, PTRSIZE + blt t0, t1, 1b + nop + + /* Do CPU & DRAM initialization */ + PTR_LA t9, mt7620_init + jalr t9 + nop + + /* Restore ra */ + move ra, s0 + + jr ra + nop + END(lowlevel_init)arch/mips/mach-mtmips/mt7620/mt7620.h new file +102
-0@@ -0,0 +1,102 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2020 MediaTek Inc. All Rights Reserved. +* +* Author: Weijie Gao <[email protected]> +*/ + +#ifndef _MT7620_H_ +#define _MT7620_H_ + +#include <linux/bitops.h> + +#define SYSCTL_BASE 0x10000000 +#define SYSCTL_SIZE 0x100 +#define MEMCTL_BASE 0x10000300 +#define MEMCTL_SIZE 0x100 +#define UARTFULL_BASE 0x10000500 +#define UARTFULL_SIZE 0x100 +#define UARTLITE_BASE 0x10000c00 +#define UARTLITE_SIZE 0x100 + +#define SYSCTL_CHIP_REV_ID_REG 0x0c +#define PKG_ID BIT(16) +#define PKG_ID_A 1 +#define PKG_ID_N 0 +#define VER_S 8 +#define VER_M GENMASK(11, 8) +#define ECO_S 0 +#define ECO_M GENMASK(3, 0) + +#define SYSCTL_SYSCFG0_REG 0x10 +#define XTAL_FREQ_SEL BIT(6) +#define XTAL_40MHZ 1 +#define XTAL_20MHZ 0 +#define DRAM_TYPE_S 4 +#define DRAM_TYPE_M GENMASK(5, 4) +#define DRAM_SDRAM 3 +#define DRAM_DDR2 2 +#define DRAM_DDR1 1 +#define DRAM_SDRAM_E1 0 +#define CHIP_MODE_S 0 +#define CHIP_MODE_M GENMASK(3, 0) + +#define SYSCTL_SYSCFG1_REG 0x14 +#define GE2_MODE_S 14 +#define GE2_MODE_M GENMASK(15, 14) +#define GE1_MODE_S 12 +#define GE1_MODE_M GENMASK(13, 12) +#define USB0_HOST_MODE BIT(10) +#define PCIE_RC_MODE BIT(8) +#define GE_MODE_M GENMASK(1, 0) + +#define SYSCTL_RSTCTL_REG 0x34 +#define MC_RST BIT(10) + +#define SYSCTL_CLKCFG0_REG 0x2c +#define PERI_CLK_SEL BIT(4) + +#define SYSCTL_CPU_SYS_CLKCFG_REG 0x3c +#define CPU_OCP_RATIO_S 16 +#define CPU_OCP_RATIO_M GENMASK(19, 16) +#define CPU_FDIV_S 8 +#define CPU_FDIV_M GENMASK(12, 8) +#define CPU_FFRAC_S 0 +#define CPU_FFRAC_M GENMASK(4, 0) + +#define SYSCTL_CUR_CLK_STS_REG 0x44 +#define CUR_CPU_OCP_RATIO_S 16 +#define CUR_CPU_OCP_RATIO_M GENMASK(19, 16) +#define CUR_CPU_FDIV_S 8 +#define CUR_CPU_FDIV_M GENMASK(12, 8) +#define CUR_CPU_FFRAC_S 0 +#define CUR_CPU_FFRAC_M GENMASK(4, 0) + +#define SYSCTL_CPLL_CFG0_REG 0x54 +#define CPLL_SW_CFG BIT(31) +#define PLL_MULT_RATIO_S 16 +#define PLL_MULT_RATIO_M GENMASK(18, 16) +#define PLL_DIV_RATIO_S 10 +#define PLL_DIV_RATIO_M GENMASK(11, 10) +#define SSC_UP_BOUND_S 8 +#define SSC_UP_BOUND_M GENMASK(9, 8) +#define SSC_EN BIT(7) +#define SSC_SWING_S 4 +#define SSC_SWING_M GENMASK(6, 4) + +#define SYSCTL_CPLL_CFG1_REG 0x58 +#define CPLL_PD BIT(26) +#define CPU_CLK_AUX1 BIT(25) +#define CPU_CLK_AUX0 BIT(24) +#define CPLL_LD BIT(23) + +#define SYSCTL_GPIOMODE_REG 0x60 +#define UARTL_GPIO_MODE BIT(5) +#define UARTF_SHARE_MODE_S 2 +#define UARTF_SHARE_MODE_M GENMASK(4, 2) +#define UARTF_MODE_UARTF_GPIO 5 + +void mt7620_dram_init (void ); +void mt7620_get_clks (u32 *cpu_clk,u32 *sys_clk,u32 *xtal_clk); + +#endif /* _MT7620_H_ */ arch/mips/mach-mtmips/mt7620/serial.c new file +0
-0
arch/mips/mach-mtmips/mt7620/serial.c line 8
Quoted 8 lines
arch/mips/mach-mtmips/mt7620/serial.c new file +8
-0@@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2020 MediaTek Inc. +* +* Author: Weijie Gao <[email protected]> +*/ + +#include <common.h>
you should just need debug_uart.h
Quoted 260 lines
arch/mips/mach-mtmips/mt7620/serial.c new file +29
-0+#include <asm/io.h> +#include <asm/addrspace.h> +#include "mt7620.h" + +void board_debug_uart_init (void ) +{ +void __iomem *base =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); + +#if CONFIG_DEBUG_UART_BASE ==0xb0000500 /* KSEG1ADDR(UARTFULL_BASE) */ +clrsetbits_32 (base +SYSCTL_GPIOMODE_REG ,UARTF_SHARE_MODE_M , +UARTF_MODE_UARTF_GPIO <<UARTF_SHARE_MODE_S ); +#else +clrbits_32 (base +SYSCTL_GPIOMODE_REG ,UARTL_GPIO_MODE ); +#endif +} + +void mtmips_spl_serial_init (void ) +{ +#ifdef CONFIG_SPL_SERIAL_SUPPORT +void __iomem *base =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); + +#if CONFIG_CONS_INDEX ==1 +clrbits_32 (base +SYSCTL_GPIOMODE_REG ,UARTL_GPIO_MODE ); +#elif CONFIG_CONS_INDEX ==2 +clrsetbits_32 (base +SYSCTL_GPIOMODE_REG ,UARTF_SHARE_MODE_M , +UARTF_MODE_UARTF_GPIO <<UARTF_SHARE_MODE_S ); +#endif +#endif /* CONFIG_SPL_SERIAL_SUPPORT */ +}arch/mips/mach-mtmips/mt7620/sysc.c new file +171
-0@@ -0,0 +1,171 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2020 MediaTek Inc. All Rights Reserved. +* +* Author: Weijie Gao <[email protected]> +* +* Misc driver for manipulating System control registers +*/ + +#include <dm.h> +#include <misc.h> +#include <asm/io.h> +#include <asm/addrspace.h> +#include <linux/compat.h> +#include <mach/mt7620-sysc.h> +#include "mt7620.h" + +struct mt7620_sysc_priv { +void __iomem *base; +}; + +static int mt7620_sysc_read (struct udevice *dev,int offset,void *buf, +int size) +{ +struct mt7620_sysc_priv *priv =dev_get_priv (dev); +u32 val; + +if (offset %sizeof (u32) || size !=sizeof (u32) || + offset >=SYSCTL_SIZE ) +return -EINVAL ; + + val =readl (priv->base + offset); + +if (buf) + *(u32 *)buf = val; + +return 0 ; +} + +static int mt7620_sysc_write (struct udevice *dev,int offset,const void *buf, +int size) +{ +struct mt7620_sysc_priv *priv =dev_get_priv (dev); +u32 val; + +if (offset %sizeof (u32) || size !=sizeof (u32) || + offset >=SYSCTL_SIZE || !buf) +return -EINVAL ; + + val = *(u32 *)buf; +writel (val, priv->base + offset); + +return 0 ; +} + +static int mt7620_sysc_ioctl (struct udevice *dev,unsigned long request, +void *buf) +{ +struct mt7620_sysc_priv *priv =dev_get_priv (dev); +struct mt7620_sysc_chip_rev *chip_rev; +struct mt7620_sysc_clks *clks; +u32 val, shift; + +if (!buf) +return -EINVAL ; + +switch (request) { +case MT7620_SYSC_IOCTL_GET_CLK : + clks = buf; +mt7620_get_clks (&clks->cpu_clk, &clks->sys_clk, + &clks->xtal_clk); + + val =readl (priv->base +SYSCTL_CLKCFG0_REG ); +if (val &PERI_CLK_SEL ) + clks->peri_clk = clks->xtal_clk; +else + clks->peri_clk =40000000 ; + +return 0 ; + +case MT7620_SYSC_IOCTL_GET_CHIP_REV : + chip_rev = buf; + + val =readl (priv->base +SYSCTL_CHIP_REV_ID_REG ); + + chip_rev->bga = !!(val &PKG_ID ); + chip_rev->ver = (val &VER_M ) >>VER_S ; + chip_rev->eco = (val &ECO_M ) >>ECO_S ; + +return 0 ; + +case MT7620_SYSC_IOCTL_SET_GE1_MODE : +case MT7620_SYSC_IOCTL_SET_GE2_MODE : + val = *(u32 *)buf; + +if (val >MT7620_SYSC_GE_ESW_PHY ) +return -EINVAL ; + +if (request ==MT7620_SYSC_IOCTL_SET_GE1_MODE ) + shift =GE1_MODE_S ; +else + shift =GE2_MODE_S ; + +clrsetbits_32 (priv->base +SYSCTL_SYSCFG1_REG , +GE_MODE_M << shift, val << shift); + +return 0 ; + +case MT7620_SYSC_IOCTL_SET_USB_MODE : + val = *(u32 *)buf; + +if (val ==MT7620_SYSC_USB_DEVICE_MODE ) + val =0 ; +else if (val ==MT7620_SYSC_USB_HOST_MODE ) + val =USB0_HOST_MODE ; + +clrsetbits_32 (priv->base +SYSCTL_SYSCFG1_REG , +USB0_HOST_MODE , val); + +return 0 ; + +case MT7620_SYSC_IOCTL_SET_PCIE_MODE : + val = *(u32 *)buf; + +if (val ==MT7620_SYSC_PCIE_EP_MODE ) + val =0 ; +else if (val ==MT7620_SYSC_PCIE_RC_MODE ) + val =PCIE_RC_MODE ; + +clrsetbits_32 (priv->base +SYSCTL_SYSCFG1_REG , +PCIE_RC_MODE , val); + +return 0 ; + +default : +return -EINVAL ; + } +} + +static int mt7620_sysc_probe (struct udevice *dev) +{ +struct mt7620_sysc_priv *priv =dev_get_priv (dev); + + priv->base =dev_remap_addr_index (dev,0 ); +if (!priv->base) { +dev_err (dev,"failed to map sysc registers\n" ); +return -EINVAL ; + } + +return 0 ; +} + +static struct misc_ops mt7620_sysc_ops = { + .read = mt7620_sysc_read, + .write = mt7620_sysc_write, + .ioctl = mt7620_sysc_ioctl, +}; + +static const struct udevice_id mt7620_sysc_ids[] = { + { .compatible ="mediatek,mt7620-sysc" }, + { } +}; + +U_BOOT_DRIVER (mt7620_sysc) = { + .name ="mt7620_sysc" , + .id =UCLASS_MISC , + .of_match = mt7620_sysc_ids, + .probe = mt7620_sysc_probe, + .ops = &mt7620_sysc_ops, + .priv_auto_alloc_size =sizeof (struct mt7620_sysc_priv ), +};include/configs/mt7620.h new file +46
-0@@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2020 MediaTek Inc. All Rights Reserved. +* +* Author: Weijie Gao <[email protected]> +*/ + +#ifndef __CONFIG_MT7620_H +#define __CONFIG_MT7620_H + +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_MIPS_TIMER_FREQ 290000000 + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_MALLOC_LEN 0x100000 +#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_LOAD_ADDR 0x80010000 + +#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 + +#define CONFIG_SYS_BOOTM_LEN 0x1000000 + +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_CBSIZE 1024 + +/* Serial common */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* SPL */ +#if defined(CONFIG_SPL ) && !defined(CONFIG_SPL_BUILD ) +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SPL_BSS_START_ADDR 0x80010000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x10000 +#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_PAD_TO 0 + +/* Dummy value */ +#define CONFIG_SYS_UBOOT_BASE 0 + +#endif /* __CONFIG_MT7620_H */ Signature · 1 line
2.17.1
Signature · 1 line
- Daniel
PATCH 5/18 mips: mtmips: add support for MediaTek MT7620 SoC
Quoted 593 lines · Daniel Schwierzeck
Am Freitag, den 16.10.2020, 15:35 +0800 schrieb Weijie Gao:
Quoted 592 lines
This patch adds support for MediaTek MT7620 SoC.
All files are dedicated for u-boot.Signed-off-by Weijie Gao <[email protected]>--- arch/mips/dts/mt7620-u-boot.dtsi | 38 +++ arch/mips/dts/mt7620.dtsi | 302 ++++++++++++++++++ arch/mips/mach-mtmips/Kconfig | 22 ++ arch/mips/mach-mtmips/Makefile | 1 + .../mach-mtmips/include/mach/mt7620-sysc.h | 54 ++++ arch/mips/mach-mtmips/mt7620/Kconfig | 54 ++++ arch/mips/mach-mtmips/mt7620/Makefile | 10 + arch/mips/mach-mtmips/mt7620/dram.c | 114 +++++++ arch/mips/mach-mtmips/mt7620/init.c | 185 +++++++++++ arch/mips/mach-mtmips/mt7620/lowlevel_init.S | 53 +++ arch/mips/mach-mtmips/mt7620/mt7620.h | 102 ++++++ arch/mips/mach-mtmips/mt7620/serial.c | 37 +++ arch/mips/mach-mtmips/mt7620/sysc.c | 171 ++++++++++ include/configs/mt7620.h | 46 +++ 14 files changed, 1189 insertions(+) create mode 100644 arch/mips/dts/mt7620-u-boot.dtsi create mode 100644 arch/mips/dts/mt7620.dtsi create mode 100644 arch/mips/mach-mtmips/include/mach/mt7620-sysc.h create mode 100644 arch/mips/mach-mtmips/mt7620/Kconfig create mode 100644 arch/mips/mach-mtmips/mt7620/Makefile create mode 100644 arch/mips/mach-mtmips/mt7620/dram.c create mode 100644 arch/mips/mach-mtmips/mt7620/init.c create mode 100644 arch/mips/mach-mtmips/mt7620/lowlevel_init.S create mode 100644 arch/mips/mach-mtmips/mt7620/mt7620.h create mode 100644 arch/mips/mach-mtmips/mt7620/serial.c create mode 100644 arch/mips/mach-mtmips/mt7620/sysc.c create mode 100644 include/configs/mt7620.harch/mips/dts/mt7620-u-boot.dtsi new file +38
-0@@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 MediaTek Inc. + * + * Author: Weijie Gao <[email protected]> + */ + +&palmbus { + u-boot,dm-pre-reloc; +}; + +&sysc { + u-boot,dm-pre-reloc; +}; + +&uartlite { + u-boot,dm-pre-reloc; +}; + +&uartfull { + u-boot,dm-pre-reloc; +}; + +&reboot { + u-boot,dm-pre-reloc; +}; + +&clkctrl { + u-boot,dm-pre-reloc; +}; + +&rstctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +};arch/mips/dts/mt7620.dtsi new file +302
-0@@ -0,0 +1,302 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/clock/mt7620-clk.h> +#include <dt-bindings/reset/mt7620-reset.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mediatek,mt7620-soc"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu at 0 { + compatible = "mti,mips24KEc"; + device_type = "cpu"; + reg = <0>; + }; + }; + + clk48m: clk48m at 0 { + compatible = "fixed-clock"; + + clock-frequency = <48000000>; + + #clock-cells = <0>; + }; + + palmbus: palmbus at 10000000 { + compatible = "palmbus", "simple-bus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1fffff>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc: sysc at 0 { + compatible = "mediatek,mt7620-sysc"; + reg = <0x0 0x100>; + }; + + clkctrl: clkctrl at 0x30 { + compatible = "mediatek,mt7620-clk"; + mediatek,sysc = <&sysc>; + + #clock-cells = <1>; + u-boot,dm-pre-reloc; + }; + + rstctrl: rstctrl at 0x34 { + compatible = "mediatek,mtmips-reset"; + reg = <0x34 0x4>; + #reset-cells = <1>; + }; + + reboot: resetctl-reboot { + compatible = "resetctl-reboot"; + + resets = <&rstctrl SYS_RST>; + reset-names = "sysreset"; + }; + + uartfull: uartfull at 500 { + compatible = "mediatek,mt7620-uart"; + reg = <0x500 0x100>; + + pinctrl-names = "default"; + pinctrl-0 = <&uartf_gpio_pins>; + + clocks = <&clkctrl CLK_UARTF>; + + resets = <&rstctrl UARTF_RST>; + reset-names = "uartf"; + + status = "disabled"; + }; + + uartlite: uartlite at c00 { + compatible = "mediatek,mt7620-uart"; + reg = <0xc00 0x100>; + + pinctrl-names = "default"; + pinctrl-0 = <&uartl_pins>; + + clocks = <&clkctrl CLK_UARTL>; + + resets = <&rstctrl UARTL_RST>; + reset-names = "uartl"; + }; + + pinctrl: pinctrl at 60 { + compatible = "mediatek,mt7620-pinctrl"; + reg = <0x60 0x4>; + + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pin_state { + sutif_pins { + groups = "sutif"; + function = "none"; + }; + }; + + nand_pins: nand_pins { + groups = "nand"; + function = "nand"; + }; + + sd_pins: sd_pins { + groups = "nand"; + function = "sd"; + }; + + spi_single_pins: spi_single_pins { + groups = "spi"; + function = "spi"; + }; + + spi_dual_pins: spi_dual_pins { + spi_master_pins { + groups = "spi"; + function = "spi"; + }; + + spi_cs1_pin { + groups = "spi cs1"; + function = "spi cs1"; + }; + }; + + uartl_pins: uartl_pins { + groups = "uartl"; + function = "uartl"; + }; + + uartf_pins: uartf_pins { + groups = "uartf"; + function = "uartf"; + }; + + uartf_pcm_pins: uartf_pcm_pins { + groups = "uartf"; + function = "uartf pcm"; + }; + + uartf_i2s_pins: uartf_i2s_pins { + groups = "uartf"; + function = "i2s uartf"; + }; + + uartf_gpio_pins: uartf_gpio_pins { + groups = "uartf"; + function = "uartf gpio"; + }; + }; + + watchdog: watchdog at 120 { + compatible = "mediatek,mt7620-wdt"; + reg = <0x120 0x10>; + + resets = <&rstctrl TIMER_RST>; + reset-names = "wdt"; + }; + + gpio0: gpio0 at 600 { + compatible = "mediatek,mt7620-gpio"; + reg = <0x600 0x34>; + + resets = <&rstctrl PIO_RST>; + reset-names = "pio"; + + mediatek,bank-name = "PIOA"; + mediatek,gpio-num = <24>; + mediatek,register-map = <0x20 0x24 0x2c 0x30>; + + gpio-controller; + #gpio-cells = <2>; + }; + + gpio1: gpio1 at 638 { + compatible = "mediatek,mt7620-gpio"; + reg = <0x638 0x24>; + + resets = <&rstctrl PIO_RST>; + reset-names = "pio"; + + mediatek,bank-name = "PIOB"; + mediatek,gpio-num = <16>; + mediatek,register-map = <0x10 0x14 0x1c 0x20>; + + gpio-controller; + #gpio-cells = <2>; + }; + + gpio2: gpio2 at 660 { + compatible = "mediatek,mt7620-gpio"; + reg = <0x660 0x24>; + + resets = <&rstctrl PIO_RST>; + reset-names = "pio"; + + mediatek,bank-name = "PIOC"; + mediatek,gpio-num = <32>; + mediatek,register-map = <0x10 0x14 0x1c 0x20>; + + gpio-controller; + #gpio-cells = <2>; + }; + + gpio3: gpio3 at 688 { + compatible = "mediatek,mt7620-gpio"; + reg = <0x688 0x24>; + + resets = <&rstctrl PIO_RST>; + reset-names = "pio"; + + mediatek,bank-name = "PIOD"; + mediatek,gpio-num = <1>; + mediatek,register-map = <0x10 0x14 0x1c 0x20>; + + gpio-controller; + #gpio-cells = <2>; + }; + + spi0: spi at b00 { + compatible = "mediatek,mt7620-spi"; + reg = <0xb00 0x100>; + + pinctrl-names = "default"; + pinctrl-0 = <&spi_single_pins>; + + resets = <&rstctrl SPI_RST>; + reset-names = "spi"; + + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&clkctrl CLK_SPI>; + }; + }; + + eth: eth at 10100000 { + compatible = "mediatek,mt7620-eth"; + reg = <0x10100000 0x10000 + 0x10110000 0x8000>; + reg-names = "fe", "esw"; + + mediatek,sysc = <&sysc>; + + resets = <&rstctrl EPHY_RST>, + <&rstctrl ESW_RST>, + <&rstctrl FE_RST>; + reset-names = "ephy", "esw", "fe"; + + clocks = <&clkctrl CLK_EPHY>, + <&clkctrl CLK_ESW>, + <&clkctrl CLK_FE>; + clock-names = "ephy", "esw", "fe"; + + status = "disabled"; + }; + + usb_phy: mt7620-usb-phy { + compatible = "mediatek,mt7620-usbphy"; + + #phy-cells = <0>; + + mediatek,sysc = <&sysc>; + + clocks = <&clkctrl CLK_UPHY_48M>, <&clkctrl CLK_UPHY_12M>; + clock-names = "uphy48m", "uphy12m"; + + resets = <&rstctrl UHST_RST>, <&rstctrl UDEV_RST>; + reset-names = "uhst", "udev"; + }; + + ehci at 101c0000 { + compatible = "generic-ehci"; + reg = <0x101c0000 0x1000>; + + phys = <&usb_phy>; + phy-names = "usb"; + }; + + mmc: mmc at 10130000 { + compatible = "mediatek,mt7620-mmc"; + reg = <0x10130000 0x4000>; + builtin-cd = <1>; + r_smpl = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd_pins>; + + clocks = <&clk48m>, <&clkctrl CLK_SDHC>; + clock-names = "source", "hclk"; + + resets = <&rstctrl SDHC_RST>; + + status = "disabled"; + }; +};arch/mips/mach-mtmips/Kconfig +22
-0@@ -5,6 +5,7 @@ config SYS_MALLOC_F_LEN default 0x1000 config SYS_SOC + default "mt7620" if SOC_MT7620 default "mt7628" if SOC_MT7628 config SYS_DCACHE_SIZE@@ -31,10 +32,30 @@ config SPL_PAYLOAD config BUILD_TARGET default "u-boot-with-spl.bin" if SPL + default "u-boot.bin" choice prompt "MediaTek MIPS SoC select" +config SOC_MT7620 + bool "MT7620" + select MIPS_L1_CACHE_SHIFT_5 + select SYS_MIPS_CACHE_INIT_RAM_LOAD + select PINCTRL_MT7620 + select MT7620_SERIAL + select SYSRESET_RESETCTL + select MISC + select SPL_SEPARATE_BSS if SPL + select SPL_LOADER_SUPPORT if SPL + select SPL_OF_CONTROL if SPL_DM + select SPL_SIMPLE_BUS if SPL_DM + select SPL_DM_SERIAL if SPL_DM + select SPL_CLK if SPL_DM && SPL_SERIAL_SUPPORT + select SPL_SYSRESET if SPL_DM + select SPL_OF_LIBFDT if SPL_OF_CONTROL + help + This supports MediaTek MT7620. + config SOC_MT7628 bool "MT7628" select MIPS_L1_CACHE_SHIFT_5@@ -58,6 +79,7 @@ config SOC_MT7628 endchoice +source "arch/mips/mach-mtmips/mt7620/Kconfig" source "arch/mips/mach-mtmips/mt7628/Kconfig" endmenuarch/mips/mach-mtmips/Makefile +1
-0@@ -5,4 +5,5 @@ obj-y += ddr_init.o obj-y += ddr_cal.o obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_SOC_MT7620) += mt7620/ obj-$(CONFIG_SOC_MT7628) += mt7628/arch/mips/mach-mtmips/include/mach/mt7620-sysc.h new file +54
-0@@ -0,0 +1,54 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2020 MediaTek Inc. +* +* Author: Weijie Gao <[email protected]> +* +* Definitions of ioctl requests of MT7620 sysc driver +*/ + +#ifndef _MT7620_SYSC_H_ +#define _MT7620_SYSC_H_ + +#include <linux/types.h> + +enum mt7620_sysc_requests { +MT7620_SYSC_IOCTL_GET_CLK , +MT7620_SYSC_IOCTL_GET_CHIP_REV , +MT7620_SYSC_IOCTL_SET_GE1_MODE , +MT7620_SYSC_IOCTL_SET_GE2_MODE , +MT7620_SYSC_IOCTL_SET_USB_MODE , +MT7620_SYSC_IOCTL_SET_PCIE_MODE +}; + +struct mt7620_sysc_clks { +u32 cpu_clk; +u32 sys_clk; +u32 xtal_clk; +u32 peri_clk; +}; + +struct mt7620_sysc_chip_rev { +bool bga; +u32 ver :4 ; +u32 eco :4 ; +}; + +enum mt7620_sysc_ge_mode { +MT7620_SYSC_GE_RGMII , +MT7620_SYSC_GE_MII , +MT7620_SYSC_GE_RMII , +MT7620_SYSC_GE_ESW_PHY , +}; + +enum mt7620_sysc_usb_mode { +MT7620_SYSC_USB_DEVICE_MODE , +MT7620_SYSC_USB_HOST_MODE +}; + +enum mt7620_sysc_pcie_mode { +MT7620_SYSC_PCIE_EP_MODE , +MT7620_SYSC_PCIE_RC_MODE +}; + +#endif /* _MT7620_SYSC_H_ */ arch/mips/mach-mtmips/mt7620/Kconfig new file +54
-0@@ -0,0 +1,54 @@ + +if SOC_MT7620 + +config DEBUG_UART_BOARD_INIT + default y + +choice + prompt "Board select" + +endchoice + +choice + prompt "CPU frequency select" + default CPU_FREQ_580MHZ + +config CPU_FREQ_480MHZ + bool "480MHz" + +config CPU_FREQ_500MHZ + bool "500MHz" + +config CPU_FREQ_520MHZ + bool "520MHz" + +config CPU_FREQ_540MHZ + bool "540MHz" + +config CPU_FREQ_560MHZ + bool "560MHz" + +config CPU_FREQ_580MHZ + bool "580MHz" + +config CPU_FREQ_600MHZ + bool "600MHz" + +config CPU_FREQ_620MHZ + bool "620MHz" + +endchoice + +config CPU_FREQ_MULTI + int + range 0 7 + default 0 if CPU_FREQ_480MHZ + default 1 if CPU_FREQ_500MHZ + default 2 if CPU_FREQ_520MHZ + default 3 if CPU_FREQ_540MHZ + default 4 if CPU_FREQ_560MHZ + default 5 if CPU_FREQ_580MHZ + default 6 if CPU_FREQ_600MHZ + default 7 if CPU_FREQ_620MHZ + +endifarch/mips/mach-mtmips/mt7620/Makefile new file +10
-0@@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-y += lowlevel_init.o +obj-y += init.o +obj-y += dram.o +obj-y += serial.o + +ifndef CONFIG_SPL_BUILD +obj-y += sysc.o +endifarch/mips/mach-mtmips/mt7620/dram.c new file +4
-0@@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2020 MediaTek Inc. All Rights Reserved. +*
Quoted 8 lines
arch/mips/mach-mtmips/mt7620/dram.c line 8
Quoted 4 lines
arch/mips/mach-mtmips/mt7620/dram.c new file +4
-0+* Author: Weijie Gao <[email protected]> +*/ + +#include <common.h> please try to avoid
common.hin new code and directly use required header files. I think you just additionallyneedasm/io.h. There is ongoing work of refactoring and cleanup ofcommon.hby Simon Glass.
ok. seems that I forgot to modify some files derived from mt7628.
Quoted 473 lines
Quoted 473 lines
arch/mips/mach-mtmips/mt7620/dram.c new file +106
-0+#include <asm/addrspace.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/sizes.h> +#include <linux/io.h> +#include <mach/ddr.h> +#include <mach/mc.h> +#include "mt7620.h" + +/* SDR parameters */ +#define SDR_CFG0_VAL 0x51B283B3 +#define SDR_CFG1_VAL 0xC00003A9 + +/* DDR2 DQ_DLY */ +#define DDR2_DQ_DLY 0x88888888 + +/* DDR2 DQS_DLY */ +#define DDR2_DQS_DLY 0x88888888 + +static const struct mc_ddr_cfg ddr1_cfgs_200mhz[] = { + [DRAM_8MB ] = {0x34A1EB94 ,0x20262324 ,0x28000033 ,0x00000002 ,0x00000000 }, + [DRAM_16MB ] = {0x34A1EB94 ,0x202A2324 ,0x28000033 ,0x00000002 ,0x00000000 }, + [DRAM_32MB ] = {0x34A1E5CA ,0x202E2324 ,0x28000033 ,0x00000002 ,0x00000000 }, + [DRAM_64MB ] = {0x3421E5CA ,0x20322324 ,0x28000033 ,0x00000002 ,0x00000000 }, + [DRAM_128MB ] = {0x241B05CA ,0x20362334 ,0x28000033 ,0x00000002 ,0x00000000 }, +}; + +static const struct mc_ddr_cfg ddr1_cfgs_160mhz[] = { + [DRAM_8MB ] = {0x239964A1 ,0x20262323 ,0x00000033 ,0x00000002 ,0x00000000 }, + [DRAM_16MB ] = {0x239964A1 ,0x202A2323 ,0x00000033 ,0x00000002 ,0x00000000 }, + [DRAM_32MB ] = {0x239964A1 ,0x202E2323 ,0x00000033 ,0x00000002 ,0x00000000 }, + [DRAM_64MB ] = {0x239984A1 ,0x20322323 ,0x00000033 ,0x00000002 ,0x00000000 }, + [DRAM_128MB ] = {0x239AB4A1 ,0x20362333 ,0x00000033 ,0x00000002 ,0x00000000 }, +}; + +static const struct mc_ddr_cfg ddr2_cfgs_200mhz[] = { + [DRAM_32MB ] = {0x2519E2E5 ,0x222E2323 ,0x68000C43 ,0x00000416 ,0x0000000A }, + [DRAM_64MB ] = {0x249AA2E5 ,0x22322323 ,0x68000C43 ,0x00000416 ,0x0000000A }, + [DRAM_128MB ] = {0x249B42E5 ,0x22362323 ,0x68000C43 ,0x00000416 ,0x0000000A }, + [DRAM_256MB ] = {0x249CE2E5 ,0x223A2323 ,0x68000C43 ,0x00000416 ,0x0000000A }, +}; + +static const struct mc_ddr_cfg ddr2_cfgs_160mhz[] = { + [DRAM_32MB ] = {0x23918250 ,0x222E2322 ,0x40000A43 ,0x00000416 ,0x00000006 }, + [DRAM_64MB ] = {0x239A2250 ,0x22322322 ,0x40000A43 ,0x00000416 ,0x00000008 }, + [DRAM_128MB ] = {0x2392A250 ,0x22362322 ,0x40000A43 ,0x00000416 ,0x00000008 }, + [DRAM_256MB ] = {0x24140250 ,0x223A2322 ,0x40000A43 ,0x00000416 ,0x00000008 }, +}; + +static void mt7620_memc_reset (int assert) +{ +void __iomem *sysc =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); + +if (assert) +setbits_32 (sysc +SYSCTL_RSTCTL_REG ,MC_RST ); +else +clrbits_32 (sysc +SYSCTL_RSTCTL_REG ,MC_RST ); +} + +void mt7620_dram_init (void ) +{ +void __iomem *sysc; +bool lspd = false; +int ddr_type, aux; +struct mc_ddr_init_param param; + + sysc =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); + ddr_type = (readl (sysc +SYSCTL_SYSCFG0_REG ) &DRAM_TYPE_M ) + >>DRAM_TYPE_S ; + aux =readl (sysc +SYSCTL_CPLL_CFG1_REG ) & + (CPU_CLK_AUX1 |CPU_CLK_AUX0 ); + +if (aux ==CPU_CLK_AUX1 || aux ==CPU_CLK_AUX0 ) + lspd = true; + +mt7620_memc_reset (1 ); +__udelay (200 ); + + param.memc =ioremap_nocache (MEMCTL_BASE ,MEMCTL_SIZE ); + param.dq_dly =DDR2_DQ_DLY ; + param.dqs_dly =DDR2_DQS_DLY ; + param.mc_reset = mt7620_memc_reset; + param.memsize =0 ; + param.bus_width =0 ; + +if (ddr_type ==DRAM_DDR1 ) { +if (lspd) + param.cfgs = ddr1_cfgs_160mhz; +else + param.cfgs = ddr1_cfgs_200mhz; + +ddr1_init (¶m); + }else if (ddr_type ==DRAM_DDR2 ) { +if (lspd) + param.cfgs = ddr2_cfgs_160mhz; +else + param.cfgs = ddr2_cfgs_200mhz; + +ddr2_init (¶m); + }else { + param.sdr_cfg0 =SDR_CFG0_VAL ; + param.sdr_cfg1 =SDR_CFG1_VAL ; + +sdr_init (¶m); + } +}arch/mips/mach-mtmips/mt7620/init.c new file +185
-0@@ -0,0 +1,185 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2020 MediaTek Inc. All Rights Reserved. +* +* Author: Weijie Gao <[email protected]> +*/ + +#include <config.h> +#include <asm/global_data.h> +#include <linux/io.h> +#include "mt7620.h" + +DECLARE_GLOBAL_DATA_PTR ; + +static const char *const dram_type[] = { +"SDRAM" ,"DDR" ,"DDR2" ,"SDRAM" +}; + +static const char *const boot_mode[(CHIP_MODE_M >>CHIP_MODE_S ) +1 ] = { + [1 ] ="NAND 4-cycles 2KB-page" , + [2 ] ="SPI-NOR 3-Byte Addr" , + [3 ] ="SPI-NOR 4-Byte Addr" , + [10 ] ="NAND 4-cycles 512B-page" , + [11 ] ="NAND 5-cycles 2KB-page" , + [12 ] ="NAND 3-cycles 512B-page" , +}; + +static void cpu_pll_init (void ) +{ +void __iomem *sysc =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); +u32 pllmul =CONFIG_CPU_FREQ_MULTI ; + +/* Make sure the pll multiplier is valid */ +if (pllmul >7 ) + pllmul =7 ; + +/* Set init CPU clock to 480MHz */ +clrsetbits_32 (sysc +SYSCTL_CPLL_CFG1_REG ,CPU_CLK_AUX1 ,CPU_CLK_AUX0 ); + +/* Enable software control of CPU PLL */ +setbits_32 (sysc +SYSCTL_CPLL_CFG0_REG ,CPLL_SW_CFG ); + +/* CPU PLL power down */ +setbits_32 (sysc +SYSCTL_CPLL_CFG1_REG ,CPLL_PD ); + +/* PLL configuration */ +clrsetbits_32 (sysc +SYSCTL_CPLL_CFG0_REG ,PLL_MULT_RATIO_M | +PLL_DIV_RATIO_M |SSC_UP_BOUND_M |SSC_EN , + (pllmul <<PLL_MULT_RATIO_S ) |SSC_SWING_M ); + +/* CPU PLL power up */ +clrbits_32 (sysc +SYSCTL_CPLL_CFG1_REG ,CPLL_PD ); + +/* Wait for CPU PLL locked */ +while (!(readl (sysc +SYSCTL_CPLL_CFG1_REG ) &CPLL_LD )) + ; + +/* Set final CPU clock source */ +clrbits_32 (sysc +SYSCTL_CPLL_CFG1_REG ,CPU_CLK_AUX1 |CPU_CLK_AUX0 ); + +/* Adjust CPU clock */ +clrsetbits_32 (sysc +SYSCTL_CPU_SYS_CLKCFG_REG , +CPU_FDIV_M |CPU_FFRAC_M , + (1 <<CPU_FDIV_S ) | (1 <<CPU_FFRAC_S )); +} + +void mt7620_init (void ) +{ +u32 cpu_clk; + +cpu_pll_init (); + +/* +* Set timer freq, which will be used during DRAM initialization +* Note that this function is using a temporary gd which will be +* destroyed after leaving this function. +*/ +mt7620_get_clks (&cpu_clk,NULL ,NULL ); + gd->arch.timer_freq = cpu_clk /2 ; + +mt7620_dram_init (); +} + +void mt7620_get_clks (u32 *cpu_clk,u32 *sys_clk,u32 *xtal_clk) +{ +void __iomem *sysc =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); +u32 val, multi, div, fdiv, ffrac, dram_type, sys_div; +u32 cpu_freq, xtal_freq; + +static const u32 div_ratio_table[] = {2 ,3 ,4 ,8 }; + + val =readl (sysc +SYSCTL_SYSCFG0_REG ); + + dram_type = (val &DRAM_TYPE_M ) >>DRAM_TYPE_S ; + +if (val &XTAL_FREQ_SEL ) + xtal_freq =40000000 ; +else + xtal_freq =20000000 ; + + val =readl (sysc +SYSCTL_CPLL_CFG1_REG ); +if (val &CPU_CLK_AUX1 ) { + cpu_freq = xtal_freq; + }else if (val &CPU_CLK_AUX0 ) { + cpu_freq =480000000 ; + }else { + val =readl (sysc +SYSCTL_CPLL_CFG0_REG ); +if (val &CPLL_SW_CFG ) { + multi = (val &PLL_MULT_RATIO_M ) >>PLL_MULT_RATIO_S ; + div = (val &PLL_DIV_RATIO_M ) >>PLL_DIV_RATIO_S ; + cpu_freq = (multi +24 ) *40000000 / + div_ratio_table[div]; + }else { + cpu_freq =600000000 ; + } + } + + val =readl (sysc +SYSCTL_CUR_CLK_STS_REG ); + ffrac = (val &CUR_CPU_FFRAC_M ) >>CUR_CPU_FFRAC_S ; + fdiv = (val &CUR_CPU_FDIV_M ) >>CUR_CPU_FDIV_S ; + cpu_freq = (cpu_freq * ffrac) / fdiv; + +switch (dram_type) { +case DRAM_SDRAM_E1 : + sys_div =4 ; +break ; +case DRAM_DDR1 : +case DRAM_DDR2 : + sys_div =3 ; +break ; +case DRAM_SDRAM : + sys_div =5 ; +break ; + } + +if (cpu_clk) + *cpu_clk = cpu_freq; + +if (sys_clk) + *sys_clk = cpu_freq / sys_div; + +if (xtal_clk) + *xtal_clk = xtal_freq; +} + +int print_cpuinfo (void ) +{ +void __iomem *sysc =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); +u32 cpu_clk, bus_clk, xtal_clk; +u32 val, ver, eco, pkg, dram, chipmode; +const char *bootdev; + + val =readl (sysc +SYSCTL_CHIP_REV_ID_REG ); + ver = (val &VER_M ) >>VER_S ; + eco = (val &ECO_M ) >>ECO_S ; + pkg = !!(val &PKG_ID ); + + val =readl (sysc +SYSCTL_SYSCFG0_REG ); + dram = (val &DRAM_TYPE_M ) >>DRAM_TYPE_S ; + chipmode = (val &CHIP_MODE_M ) >>CHIP_MODE_S ; + + bootdev = boot_mode[chipmode]; +if (!bootdev) + bootdev ="Unsupported boot mode" ; + +printf ("CPU: MediaTek MT7620%c ver:%u eco:%u\n" , + pkg ?'A' :'N' , ver, eco); + +printf ("Boot: %s, %s\n" , dram_type[dram], bootdev); + +mt7620_get_clks (&cpu_clk, &bus_clk, &xtal_clk); + +/* Set final timer frequency */ + gd->arch.timer_freq = cpu_clk /2 ; + +printf ("Clock: CPU: %uMHz, Bus: %uMHz, XTAL: %uMHz\n" , + cpu_clk /1000000 , bus_clk /1000000 , xtal_clk /1000000 ); + +return 0 ; +} + +ulong notrace get_tbclk(void) +{ +return gd->arch.timer_freq; +}arch/mips/mach-mtmips/mt7620/lowlevel_init.S new file +53
-0@@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2020 MediaTek Inc. + * + * Author: Weijie Gao <[email protected]> + */ + +#include <config.h> +#include <asm-offsets.h> +#include <asm/regdef.h> +#include <asm/asm.h> + + .set noreorder + +NESTED(lowlevel_init, 0, ra) + /* Save ra and do real lowlevel initialization */ + move s0, ra + + /* + * Use SRAM from 802.11n MAC/BBP, 16KiB (0x10184000 ~ 0x10187fff) + * NOTE: non-word operations may fail in this SRAM. + * Use it as stack only for CPU/DRAM init which only has word operations. + */ + PTR_LI sp, 0xb0187f00 + + /* We still need a temporary gd for udelay */ + PTR_SUBU \ + sp, sp, GD_SIZE # reserve space for gd + li t0, -16 + and sp, sp, t0 # force 16 byte alignment + move k0, sp # save gd pointer + + move fp, sp + + /* Clear gd */ + move t0, k0 +1: + PTR_S zero, 0(t0) + PTR_ADDIU t0, PTRSIZE + blt t0, t1, 1b + nop + + /* Do CPU & DRAM initialization */ + PTR_LA t9, mt7620_init + jalr t9 + nop + + /* Restore ra */ + move ra, s0 + + jr ra + nop + END(lowlevel_init)arch/mips/mach-mtmips/mt7620/mt7620.h new file +102
-0@@ -0,0 +1,102 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2020 MediaTek Inc. All Rights Reserved. +* +* Author: Weijie Gao <[email protected]> +*/ + +#ifndef _MT7620_H_ +#define _MT7620_H_ + +#include <linux/bitops.h> + +#define SYSCTL_BASE 0x10000000 +#define SYSCTL_SIZE 0x100 +#define MEMCTL_BASE 0x10000300 +#define MEMCTL_SIZE 0x100 +#define UARTFULL_BASE 0x10000500 +#define UARTFULL_SIZE 0x100 +#define UARTLITE_BASE 0x10000c00 +#define UARTLITE_SIZE 0x100 + +#define SYSCTL_CHIP_REV_ID_REG 0x0c +#define PKG_ID BIT(16) +#define PKG_ID_A 1 +#define PKG_ID_N 0 +#define VER_S 8 +#define VER_M GENMASK(11, 8) +#define ECO_S 0 +#define ECO_M GENMASK(3, 0) + +#define SYSCTL_SYSCFG0_REG 0x10 +#define XTAL_FREQ_SEL BIT(6) +#define XTAL_40MHZ 1 +#define XTAL_20MHZ 0 +#define DRAM_TYPE_S 4 +#define DRAM_TYPE_M GENMASK(5, 4) +#define DRAM_SDRAM 3 +#define DRAM_DDR2 2 +#define DRAM_DDR1 1 +#define DRAM_SDRAM_E1 0 +#define CHIP_MODE_S 0 +#define CHIP_MODE_M GENMASK(3, 0) + +#define SYSCTL_SYSCFG1_REG 0x14 +#define GE2_MODE_S 14 +#define GE2_MODE_M GENMASK(15, 14) +#define GE1_MODE_S 12 +#define GE1_MODE_M GENMASK(13, 12) +#define USB0_HOST_MODE BIT(10) +#define PCIE_RC_MODE BIT(8) +#define GE_MODE_M GENMASK(1, 0) + +#define SYSCTL_RSTCTL_REG 0x34 +#define MC_RST BIT(10) + +#define SYSCTL_CLKCFG0_REG 0x2c +#define PERI_CLK_SEL BIT(4) + +#define SYSCTL_CPU_SYS_CLKCFG_REG 0x3c +#define CPU_OCP_RATIO_S 16 +#define CPU_OCP_RATIO_M GENMASK(19, 16) +#define CPU_FDIV_S 8 +#define CPU_FDIV_M GENMASK(12, 8) +#define CPU_FFRAC_S 0 +#define CPU_FFRAC_M GENMASK(4, 0) + +#define SYSCTL_CUR_CLK_STS_REG 0x44 +#define CUR_CPU_OCP_RATIO_S 16 +#define CUR_CPU_OCP_RATIO_M GENMASK(19, 16) +#define CUR_CPU_FDIV_S 8 +#define CUR_CPU_FDIV_M GENMASK(12, 8) +#define CUR_CPU_FFRAC_S 0 +#define CUR_CPU_FFRAC_M GENMASK(4, 0) + +#define SYSCTL_CPLL_CFG0_REG 0x54 +#define CPLL_SW_CFG BIT(31) +#define PLL_MULT_RATIO_S 16 +#define PLL_MULT_RATIO_M GENMASK(18, 16) +#define PLL_DIV_RATIO_S 10 +#define PLL_DIV_RATIO_M GENMASK(11, 10) +#define SSC_UP_BOUND_S 8 +#define SSC_UP_BOUND_M GENMASK(9, 8) +#define SSC_EN BIT(7) +#define SSC_SWING_S 4 +#define SSC_SWING_M GENMASK(6, 4) + +#define SYSCTL_CPLL_CFG1_REG 0x58 +#define CPLL_PD BIT(26) +#define CPU_CLK_AUX1 BIT(25) +#define CPU_CLK_AUX0 BIT(24) +#define CPLL_LD BIT(23) + +#define SYSCTL_GPIOMODE_REG 0x60 +#define UARTL_GPIO_MODE BIT(5) +#define UARTF_SHARE_MODE_S 2 +#define UARTF_SHARE_MODE_M GENMASK(4, 2) +#define UARTF_MODE_UARTF_GPIO 5 + +void mt7620_dram_init (void ); +void mt7620_get_clks (u32 *cpu_clk,u32 *sys_clk,u32 *xtal_clk); + +#endif /* _MT7620_H_ */ arch/mips/mach-mtmips/mt7620/serial.c new file +2
-0@@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
Quoted 8 lines
arch/mips/mach-mtmips/mt7620/serial.c line 8
Quoted 6 lines
arch/mips/mach-mtmips/mt7620/serial.c new file +6
-0+* Copyright (C) 2020 MediaTek Inc. +* +* Author: Weijie Gao <[email protected]> +*/ + +#include <common.h> you should just need
debug_uart.h
ok. I'll change it.
Quoted 261 lines
Quoted 261 lines
arch/mips/mach-mtmips/mt7620/serial.c new file +29
-0+#include <asm/io.h> +#include <asm/addrspace.h> +#include "mt7620.h" + +void board_debug_uart_init (void ) +{ +void __iomem *base =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); + +#if CONFIG_DEBUG_UART_BASE ==0xb0000500 /* KSEG1ADDR(UARTFULL_BASE) */ +clrsetbits_32 (base +SYSCTL_GPIOMODE_REG ,UARTF_SHARE_MODE_M , +UARTF_MODE_UARTF_GPIO <<UARTF_SHARE_MODE_S ); +#else +clrbits_32 (base +SYSCTL_GPIOMODE_REG ,UARTL_GPIO_MODE ); +#endif +} + +void mtmips_spl_serial_init (void ) +{ +#ifdef CONFIG_SPL_SERIAL_SUPPORT +void __iomem *base =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); + +#if CONFIG_CONS_INDEX ==1 +clrbits_32 (base +SYSCTL_GPIOMODE_REG ,UARTL_GPIO_MODE ); +#elif CONFIG_CONS_INDEX ==2 +clrsetbits_32 (base +SYSCTL_GPIOMODE_REG ,UARTF_SHARE_MODE_M , +UARTF_MODE_UARTF_GPIO <<UARTF_SHARE_MODE_S ); +#endif +#endif /* CONFIG_SPL_SERIAL_SUPPORT */ +}arch/mips/mach-mtmips/mt7620/sysc.c new file +171
-0@@ -0,0 +1,171 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2020 MediaTek Inc. All Rights Reserved. +* +* Author: Weijie Gao <[email protected]> +* +* Misc driver for manipulating System control registers +*/ + +#include <dm.h> +#include <misc.h> +#include <asm/io.h> +#include <asm/addrspace.h> +#include <linux/compat.h> +#include <mach/mt7620-sysc.h> +#include "mt7620.h" + +struct mt7620_sysc_priv { +void __iomem *base; +}; + +static int mt7620_sysc_read (struct udevice *dev,int offset,void *buf, +int size) +{ +struct mt7620_sysc_priv *priv =dev_get_priv (dev); +u32 val; + +if (offset %sizeof (u32) || size !=sizeof (u32) || + offset >=SYSCTL_SIZE ) +return -EINVAL ; + + val =readl (priv->base + offset); + +if (buf) + *(u32 *)buf = val; + +return 0 ; +} + +static int mt7620_sysc_write (struct udevice *dev,int offset,const void *buf, +int size) +{ +struct mt7620_sysc_priv *priv =dev_get_priv (dev); +u32 val; + +if (offset %sizeof (u32) || size !=sizeof (u32) || + offset >=SYSCTL_SIZE || !buf) +return -EINVAL ; + + val = *(u32 *)buf; +writel (val, priv->base + offset); + +return 0 ; +} + +static int mt7620_sysc_ioctl (struct udevice *dev,unsigned long request, +void *buf) +{ +struct mt7620_sysc_priv *priv =dev_get_priv (dev); +struct mt7620_sysc_chip_rev *chip_rev; +struct mt7620_sysc_clks *clks; +u32 val, shift; + +if (!buf) +return -EINVAL ; + +switch (request) { +case MT7620_SYSC_IOCTL_GET_CLK : + clks = buf; +mt7620_get_clks (&clks->cpu_clk, &clks->sys_clk, + &clks->xtal_clk); + + val =readl (priv->base +SYSCTL_CLKCFG0_REG ); +if (val &PERI_CLK_SEL ) + clks->peri_clk = clks->xtal_clk; +else + clks->peri_clk =40000000 ; + +return 0 ; + +case MT7620_SYSC_IOCTL_GET_CHIP_REV : + chip_rev = buf; + + val =readl (priv->base +SYSCTL_CHIP_REV_ID_REG ); + + chip_rev->bga = !!(val &PKG_ID ); + chip_rev->ver = (val &VER_M ) >>VER_S ; + chip_rev->eco = (val &ECO_M ) >>ECO_S ; + +return 0 ; + +case MT7620_SYSC_IOCTL_SET_GE1_MODE : +case MT7620_SYSC_IOCTL_SET_GE2_MODE : + val = *(u32 *)buf; + +if (val >MT7620_SYSC_GE_ESW_PHY ) +return -EINVAL ; + +if (request ==MT7620_SYSC_IOCTL_SET_GE1_MODE ) + shift =GE1_MODE_S ; +else + shift =GE2_MODE_S ; + +clrsetbits_32 (priv->base +SYSCTL_SYSCFG1_REG , +GE_MODE_M << shift, val << shift); + +return 0 ; + +case MT7620_SYSC_IOCTL_SET_USB_MODE : + val = *(u32 *)buf; + +if (val ==MT7620_SYSC_USB_DEVICE_MODE ) + val =0 ; +else if (val ==MT7620_SYSC_USB_HOST_MODE ) + val =USB0_HOST_MODE ; + +clrsetbits_32 (priv->base +SYSCTL_SYSCFG1_REG , +USB0_HOST_MODE , val); + +return 0 ; + +case MT7620_SYSC_IOCTL_SET_PCIE_MODE : + val = *(u32 *)buf; + +if (val ==MT7620_SYSC_PCIE_EP_MODE ) + val =0 ; +else if (val ==MT7620_SYSC_PCIE_RC_MODE ) + val =PCIE_RC_MODE ; + +clrsetbits_32 (priv->base +SYSCTL_SYSCFG1_REG , +PCIE_RC_MODE , val); + +return 0 ; + +default : +return -EINVAL ; + } +} + +static int mt7620_sysc_probe (struct udevice *dev) +{ +struct mt7620_sysc_priv *priv =dev_get_priv (dev); + + priv->base =dev_remap_addr_index (dev,0 ); +if (!priv->base) { +dev_err (dev,"failed to map sysc registers\n" ); +return -EINVAL ; + } + +return 0 ; +} + +static struct misc_ops mt7620_sysc_ops = { + .read = mt7620_sysc_read, + .write = mt7620_sysc_write, + .ioctl = mt7620_sysc_ioctl, +}; + +static const struct udevice_id mt7620_sysc_ids[] = { + { .compatible ="mediatek,mt7620-sysc" }, + { } +}; + +U_BOOT_DRIVER (mt7620_sysc) = { + .name ="mt7620_sysc" , + .id =UCLASS_MISC , + .of_match = mt7620_sysc_ids, + .probe = mt7620_sysc_probe, + .ops = &mt7620_sysc_ops, + .priv_auto_alloc_size =sizeof (struct mt7620_sysc_priv ), +};include/configs/mt7620.h new file +46
-0@@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2020 MediaTek Inc. All Rights Reserved. +* +* Author: Weijie Gao <[email protected]> +*/ + +#ifndef __CONFIG_MT7620_H +#define __CONFIG_MT7620_H + +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_MIPS_TIMER_FREQ 290000000 + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_MALLOC_LEN 0x100000 +#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_LOAD_ADDR 0x80010000 + +#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 + +#define CONFIG_SYS_BOOTM_LEN 0x1000000 + +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_CBSIZE 1024 + +/* Serial common */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* SPL */ +#if defined(CONFIG_SPL ) && !defined(CONFIG_SPL_BUILD ) +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SPL_BSS_START_ADDR 0x80010000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x10000 +#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_PAD_TO 0 + +/* Dummy value */ +#define CONFIG_SYS_UBOOT_BASE 0 + +#endif /* __CONFIG_MT7620_H */ Signature · 1 line
2.17.1