arm: actions: increase SYS_MALLOC_F_LEN
PATCH 1/1 arm: actions: increase SYS_MALLOC_F_LEN
after commit 4ab3817ff16a ("clk: fixed-rate: Enable DM_FLAG_PRE_RELOC flag") Cubieboard7 (based on actions S700 SoC) fails to boot.
It is due to the fact that the default value of CONFIG_SYS_MALLOC_F_LEN (0x400) would not provide enough memory for clock device to probe (before relocation) well.
This commit fixes it, by increasing SYS_MALLOC_F_LEN to value 0x2000.
--- Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Kconfig +1 -1
@@ -200,7 +200,7 @@ config SYS_MALLOC_F_LEN default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \ ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \ ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \ - ARCH_LS1046A || ARCH_QEMU || ARCH_SUNXI) + ARCH_LS1046A || ARCH_QEMU || ARCH_SUNXI || ARCH_OWL) default 0x400 help Before relocation, memory is very limited on many platforms. Still,
Signature · 1 line
2.7.4
PATCH 1/1 arm: actions: increase SYS_MALLOC_F_LEN
Quoted 11 lines · Amit Singh Tomar
after commit
4ab3817ff16a("clk: fixed-rate: EnableDM_FLAG_PRE_RELOCflag") Cubieboard7 (based on actions S700 SoC) fails to boot.It is due to the fact that the default value of
CONFIG_SYS_MALLOC_F_LEN(0x400) would not provide enough memory for clock device to probe (before relocation) well.This commit fixes it, by increasing
SYS_MALLOC_F_LENto value0x2000.Suggested-by Andre Przywara <[email protected]>Signed-off-by Amit Singh Tomar <[email protected]>
Thanks for fixing!
Regards,
Mani
Quoted 20 lines
--- Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Kconfig +1
-1@@ -200,7 +200,7 @@ config SYS_MALLOC_F_LEN default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \ ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \ ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \ - ARCH_LS1046A || ARCH_QEMU || ARCH_SUNXI) + ARCH_LS1046A || ARCH_QEMU || ARCH_SUNXI || ARCH_OWL) default 0x400 help Before relocation, memory is very limited on many platforms. Still,Signature · 1 line
2.7.4
PATCH 1/1 arm: actions: increase SYS_MALLOC_F_LEN
In reply to Amit Singh TomarQuoted 11 lines · Amit Singh Tomar
after commit
4ab3817ff16a("clk: fixed-rate: EnableDM_FLAG_PRE_RELOCflag") Cubieboard7 (based on actions S700 SoC) fails to boot.It is due to the fact that the default value of
CONFIG_SYS_MALLOC_F_LEN(0x400) would not provide enough memory for clock device to probe (before relocation) well.This commit fixes it, by increasing
SYS_MALLOC_F_LENto value0x2000.Suggested-by Andre Przywara <[email protected]>Signed-off-by Amit Singh Tomar <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201109/e72c20ec/attachment.sig>