add axi clock control for MT8192 spi-nor
Subsystems (2)
PATCH 1/1 add axi clock control for MT8192 spi-nor
bayi cheng (1):
spi: spi-mtk-nor: add axi clock control for MT8192 spi-nor
drivers/spi/spi-mtk-nor.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
--
1.9.1
PATCH 1/1 spi: spi-mtk-nor: add axi clock control for MT8192 spi-nor
From: bayi cheng <[email protected]>
MT8192 spi-nor is an independent sub system, we need extra control axi bus clock for it. Add support for the additional axi clock to allow it to be configured appropriately.
--- drivers/spi/spi-mtk-nor.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
drivers/spi/spi-mtk-nor.c +15 -1
@@ -103,6 +103,7 @@ struct mtk_nor {dma_addr_t buffer_dma;struct clk *spi_clk;struct clk *ctlr_clk; +struct clk *axi_clk;unsigned int spi_freq;bool wbuf_en;bool has_irq;
@@ -672,6 +673,7 @@ static void mtk_nor_disable_clk(struct mtk_nor *sp) {clk_disable_unprepare (sp->spi_clk);clk_disable_unprepare (sp->ctlr_clk); +clk_disable_unprepare (sp->axi_clk); }static int mtk_nor_enable_clk (struct mtk_nor *sp)
@@ -688,6 +690,13 @@ static int mtk_nor_enable_clk(struct mtk_nor *sp)return ret; } + ret =clk_prepare_enable (sp->axi_clk); +if (ret) { +clk_disable_unprepare (sp->spi_clk); +clk_disable_unprepare (sp->ctlr_clk); +return ret; + } +return 0 ; }
@@ -746,7 +755,7 @@ static int mtk_nor_probe(struct platform_device *pdev)struct spi_controller *ctlr;struct mtk_nor *sp;void __iomem *base; -struct clk *spi_clk, *ctlr_clk; +struct clk *spi_clk, *ctlr_clk, *axi_clk;int ret, irq;unsigned long dma_bits;
@@ -762,6 +771,10 @@ static int mtk_nor_probe(struct platform_device *pdev)if (IS_ERR (ctlr_clk))return PTR_ERR (ctlr_clk); + axi_clk =devm_clk_get_optional (&pdev->dev,"axi" ); +if (IS_ERR (axi_clk)) +return PTR_ERR (axi_clk); + dma_bits = (unsigned long )of_device_get_match_data (&pdev->dev);if (dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (dma_bits))) {dev_err (&pdev->dev,"failed to set dma mask(%lu)\n" , dma_bits);
@@ -794,6 +807,7 @@ static int mtk_nor_probe(struct platform_device *pdev) sp->dev = &pdev->dev; sp->spi_clk = spi_clk; sp->ctlr_clk = ctlr_clk; + sp->axi_clk = axi_clk; sp->high_dma = (dma_bits >32 ); sp->buffer = dmam_alloc_coherent(&pdev->dev, MTK_NOR_BOUNCE_BUF_SIZE + MTK_NOR_DMA_ALIGN,
Signature · 1 line
1.9.1
Re: [PATCH v1] spi: spi-mtk-nor: add axi clock control for MT8192 spi-nor
Quoted 8 lines · Bayi Cheng
From: bayi cheng <[email protected]>
MT8192 spi-nor is an independent sub system, we need extra control axi bus clock for it. Add support for the additional axi clock to allow it to be configured appropriately.
Signed-off-by bayi cheng <[email protected]>
Quoted 67 lines
--- drivers/spi/spi-mtk-nor.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)drivers/spi/spi-mtk-nor.c +15
-2@@ -103,6 +103,7 @@ struct mtk_nor {dma_addr_t buffer_dma;struct clk *spi_clk;struct clk *ctlr_clk; +struct clk *axi_clk;unsigned int spi_freq;bool wbuf_en;bool has_irq;@@ -672,6 +673,7 @@ static void mtk_nor_disable_clk(struct mtk_nor *sp) {clk_disable_unprepare (sp->spi_clk);clk_disable_unprepare (sp->ctlr_clk); +clk_disable_unprepare (sp->axi_clk); }static int mtk_nor_enable_clk (struct mtk_nor *sp)@@ -688,6 +690,13 @@ static int mtk_nor_enable_clk(struct mtk_nor *sp)return ret; } + ret =clk_prepare_enable (sp->axi_clk); +if (ret) { +clk_disable_unprepare (sp->spi_clk); +clk_disable_unprepare (sp->ctlr_clk); +return ret; + } +return 0 ; }@@ -746,7 +755,7 @@ static int mtk_nor_probe(struct platform_device *pdev)struct spi_controller *ctlr;struct mtk_nor *sp;void __iomem *base; -struct clk *spi_clk, *ctlr_clk; +struct clk *spi_clk, *ctlr_clk, *axi_clk;int ret, irq;unsigned long dma_bits;@@ -762,6 +771,10 @@ static int mtk_nor_probe(struct platform_device *pdev)if (IS_ERR (ctlr_clk))return PTR_ERR (ctlr_clk); + axi_clk =devm_clk_get_optional (&pdev->dev,"axi" ); +if (IS_ERR (axi_clk)) +return PTR_ERR (axi_clk); + dma_bits = (unsigned long )of_device_get_match_data (&pdev->dev);if (dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (dma_bits))) {dev_err (&pdev->dev,"failed to set dma mask(%lu)\n" , dma_bits);@@ -794,6 +807,7 @@ static int mtk_nor_probe(struct platform_device *pdev) sp->dev = &pdev->dev; sp->spi_clk = spi_clk; sp->ctlr_clk = ctlr_clk; + sp->axi_clk = axi_clk; sp->high_dma = (dma_bits >32 ); sp->buffer = dmam_alloc_coherent(&pdev->dev, MTK_NOR_BOUNCE_BUF_SIZE + MTK_NOR_DMA_ALIGN, --
Quoted 2 lines
1.9.1
_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek
Mark Brown
maintainerQuoted 2 lines · Bayi Cheng
bayi cheng (1):
spi: spi-mtk-nor: add axi clock control for MT8192 spi-nor
Please don't send cover letters for single patches, if there is anything that needs saying put it in the changelog of the patch or after the --- if it's administrative stuff. This reduces mail volume and ensures that any important information is recorded in the changelog rather than being lost.
_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek
Mark Brown
maintainerQuoted 6 lines · Bayi Cheng
bayi cheng (1):
spi: spi-mtk-nor: add axi clock control for MT8192 spi-nordrivers/spi/spi-mtk-nor.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
Quoted 6 lines
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
Thanks!
[1/1] spi: spi-mtk-nor: add axi clock control for MT8192 spi-nor
commit: f32cce8483f18a098ae50b524f926ef0f2bd2e12
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek