Skip to contentSkip to conversation

ath11k: add 64bit check before reading msi high addr

PATCH In review Anilkumar Kolli 2 participants 3 messages Nov 24, 2020 – Dec 7, 2020 Qualcomm Atheros ATH11K wireless driver

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ath11k: add 64bit check before reading msi high addr

In QCN9074 ath11k boot, firmware crash is observed in 64-bit builds and is due to wrong 64 bit MSI address size. This patch fixes the firmware crash. Read msi high addr if 64-bit addresses allowed on MSI.

Tested-On: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r1-00026-QCAHKSWPL_SILICONZ-2

---
V2:
- Fixes compilation issues

 drivers/net/wireless/ath/ath11k/pci.c | 11 +++++++++--
 drivers/net/wireless/ath/ath11k/pci.h |  1 +
 2 files changed, 10 insertions(+), 2 deletions(-)
drivers/net/wireless/ath/ath11k/pci.c +9 -2
index b75f47dc36de..54ac0a861063 100644
@@ -264,13 +264,18 @@ int ath11k_pci_get_msi_irq(struct device *dev, unsigned int vector)
 static void ath11k_pci_get_msi_address(struct ath11k_base *ab, u32 *msi_addr_lo,
 				       u32 *msi_addr_hi)
 {
+	struct ath11k_pci *ab_pci = ath11k_pci_priv(ab);
 	struct pci_dev *pci_dev = to_pci_dev(ab->dev);
 
 	pci_read_config_dword(pci_dev, pci_dev->msi_cap + PCI_MSI_ADDRESS_LO,
 			      msi_addr_lo);
 
-	pci_read_config_dword(pci_dev, pci_dev->msi_cap + PCI_MSI_ADDRESS_HI,
-			      msi_addr_hi);
+	if (test_bit(ATH11K_PCI_FLAG_IS_MSI_64, &ab_pci->flags)) {
+		pci_read_config_dword(pci_dev, pci_dev->msi_cap + PCI_MSI_ADDRESS_HI,
+				      msi_addr_hi);
+	} else {
+		*msi_addr_hi = 0;
+	}
 }
 
 int ath11k_pci_get_user_msi_assignment(struct ath11k_pci *ab_pci, char *user_name,
@@ -658,6 +663,8 @@ static int ath11k_pci_enable_msi(struct ath11k_pci *ab_pci)
 	}
 
 	ab_pci->msi_ep_base_data = msi_desc->msg.data;
+	if (msi_desc->msi_attrib.is_64)
+		set_bit(ATH11K_PCI_FLAG_IS_MSI_64, &ab_pci->flags);
 
 	ath11k_dbg(ab, ATH11K_DBG_PCI, "msi base data is %d\n", ab_pci->msi_ep_base_data);
 
drivers/net/wireless/ath/ath11k/pci.h +1 -0
index 43562f774a37..9c503a17c237 100644
@@ -38,6 +38,7 @@ struct ath11k_msi_config {
 
 enum ath11k_pci_flags {
 	ATH11K_PCI_FLAG_INIT_DONE,
+	ATH11K_PCI_FLAG_IS_MSI_64,
 };
 
 struct ath11k_pci {
Signature · 7 lines
2.7.4


-- 
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k
#1 lore raw
Quoted 9 lines · Anilkumar Kolli

In QCN9074 ath11k boot, firmware crash is observed in 64-bit builds and is due to wrong 64 bit MSI address size. This patch fixes the firmware crash. Read msi high addr if 64-bit addresses allowed on MSI.

Tested-On: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r1-00026-QCAHKSWPL_SILICONZ-2

Patch applied to ath-next branch of ath.git, thanks.

e8e55d8919ea ath11k: add 64bit check before reading msi high addr

Signature · 9 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches


-- 
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k
#2 lore raw
In reply to Anilkumar Kolli
Quoted 9 lines · Anilkumar Kolli

In QCN9074 ath11k boot, firmware crash is observed in 64-bit builds and is due to wrong 64 bit MSI address size. This patch fixes the firmware crash. Read msi high addr if 64-bit addresses allowed on MSI.

Tested-On: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r1-00026-QCAHKSWPL_SILICONZ-2

Patch applied to ath-next branch of ath.git, thanks.

e8e55d8919ea ath11k: add 64bit check before reading msi high addr

Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches