Skip to contentSkip to conversation

net: phy: marvell: replace phy_modify()

PATCH In review Yejune Deng 2 participants 2 messages Nov 30, 2020 – Dec 2, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 net: phy: marvell: replace phy_modify()

a set of phy_set_bits() looks more neater

---
 drivers/net/phy/marvell.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/net/phy/marvell.c +8 -8
index 587930a..620052c 100644
@@ -1132,8 +1132,8 @@ static int m88e1510_config_init(struct phy_device *phydev)
 			return err;
 
 		/* PHY reset is necessary after changing MODE[2:0] */
-		err = phy_modify(phydev, MII_88E1510_GEN_CTRL_REG_1, 0,
-				 MII_88E1510_GEN_CTRL_REG_1_RESET);
+		err = phy_set_bits(phydev, MII_88E1510_GEN_CTRL_REG_1,
+				   MII_88E1510_GEN_CTRL_REG_1_RESET);
 		if (err < 0)
 			return err;
 
@@ -1725,8 +1725,8 @@ static int m88e1318_set_wol(struct phy_device *phydev,
 			__phy_read(phydev, MII_M1011_IEVENT);
 
 		/* Enable the WOL interrupt */
-		err = __phy_modify(phydev, MII_88E1318S_PHY_CSIER, 0,
-				   MII_88E1318S_PHY_CSIER_WOL_EIE);
+		err = __phy_set_bits(phydev, MII_88E1318S_PHY_CSIER,
+				     MII_88E1318S_PHY_CSIER_WOL_EIE);
 		if (err < 0)
 			goto error;
 
@@ -1764,9 +1764,9 @@ static int m88e1318_set_wol(struct phy_device *phydev,
 			goto error;
 
 		/* Clear WOL status and enable magic packet matching */
-		err = __phy_modify(phydev, MII_88E1318S_PHY_WOL_CTRL, 0,
-				   MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS |
-				   MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE);
+		err = __phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL,
+				     MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS |
+				     MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE);
 		if (err < 0)
 			goto error;
 	} else {
@@ -1995,7 +1995,7 @@ static int marvell_cable_test_start_common(struct phy_device *phydev)
 		return bmsr;
 
 	if (bmcr & BMCR_ANENABLE) {
-		ret =  phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0);
+		ret =  phy_clear_bits(phydev, MII_BMCR, BMCR_ANENABLE);
 		if (ret < 0)
 			return ret;
 		ret = genphy_soft_reset(phydev);
Signature · 1 line
1.9.1
maintainer
#1 lore raw
Quoted 3 lines · On Mon, 30 Nov 2020 18:41:35 +0800 Yejune Deng wrote:

a set of phy_set_bits() looks more neater

Looks like that's what those helpers are for so applied to net-next, thanks.