Add Unisoc's drm kms module
Subsystems (4)
cover Add Unisoc's drm kms module
ChangeList:
RFC v1:
1. only upstream modeset and atomic at first commit.
2. remove some unused code;
3. use alpha and blend_mode properties;
3. add yaml support;
4. remove auto-adaptive panel driver;
5. bugfix
RFC v2:
1. add sprd crtc and plane module for KMS, preparing for multi crtc&encoder
2. remove gem drivers, use generic CMA handlers
3. remove redundant "module_init", all the sub modules loading by KMS
RFC v3:
1. multi crtc&encoder design have problem, so rollback to v1
RFC v4:
1. update to gcc-linaro-7.5.0
2. update to Linux 5.6-rc3
3. remove pm_runtime support
4. add COMPILE_TEST, remove unused kconfig
5. "drm_dev_put" on drm_unbind
6. fix some naming convention issue
7. remove semaphore lock for crtc flip
8. remove static variables
RFC v5:
1. optimize encoder and connector code implementation
2. use "platform_get_irq" and "platform_get_resource"
3. drop useless function return type, drop unless debug log
4. custom properties should be separate, so drop it
5. use DRM_XXX replase pr_xxx
6. drop dsi&dphy hal callback ops
7. drop unless callback ops checking
8. add comments for sprd dpu structure
RFC v6:
1. Access registers via readl/writel
2. Checking for unsupported KMS properties (format, rotation, blend_mode, etc) on plane_check ops
3. Remove always true checks for dpu core ops
RFC v7:
1. Fix DTC unit name warnings
2. Fix the problem of maintainers
3. Call drmm_mode_config_init to mode config init
4. Embed drm_device in sprd_drm and use devm_drm_dev_alloc
5. Replace DRM_XXX with drm_xxx on KMS module, but not suitable for other subsystems
6. Remove plane_update stuff, dpu handles all the HW update in crtc->atomic_flush
7. Dsi&Dphy Code structure adjustment, all move to "sprd/"
v0:
1. Remove dpu_core_ops stuff layer for sprd drtc driver, but dpu_layer need to keeping. Because all the HW update in crtc->atomic_flush, we need temporary storage all layers for the dpu pageflip of atomic_flush.
2. Add ports subnode with port@X.
v1:
1. Remove dphy and dsi graph binding, merge the dphy driver into the dsi.
2. Add commit messages for Unisoc's virtual nodes.
Kevin Tang (6):
dt-bindings: display: add Unisoc's drm master bindings drm/sprd: add Unisoc's drm kms master
dt-bindings: display: add Unisoc's dpu bindings drm/sprd: add Unisoc's drm display controller driver
dt-bindings: display: add Unisoc's mipi dsi controller bindings drm/sprd: add Unisoc's drm mipi dsi&dphy driver
.../display/sprd/sprd,display-subsystem.yaml | 64 + .../bindings/display/sprd/sprd,sharkl3-dpu.yaml | 83 ++ .../display/sprd/sprd,sharkl3-dsi-host.yaml | 107 ++ drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/sprd/Kconfig | 13 + drivers/gpu/drm/sprd/Makefile | 11 + drivers/gpu/drm/sprd/dpu_r2p0.c | 598 ++++++++ drivers/gpu/drm/sprd/dw_dsi_ctrl.c | 792 +++++++++++ drivers/gpu/drm/sprd/dw_dsi_ctrl.h | 1475 ++++++++++++++++++++ drivers/gpu/drm/sprd/dw_dsi_ctrl_ppi.c | 275 ++++ drivers/gpu/drm/sprd/dw_dsi_ctrl_ppi.h | 34 + drivers/gpu/drm/sprd/megacores_pll.c | 316 +++++ drivers/gpu/drm/sprd/megacores_pll.h | 146 ++ drivers/gpu/drm/sprd/sprd_dpu.c | 457 ++++++ drivers/gpu/drm/sprd/sprd_dpu.h | 175 +++ drivers/gpu/drm/sprd/sprd_drm.c | 224 +++ drivers/gpu/drm/sprd/sprd_drm.h | 19 + drivers/gpu/drm/sprd/sprd_dsi.c | 1145 +++++++++++++++ drivers/gpu/drm/sprd/sprd_dsi.h | 106 ++ 20 files changed, 6043 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml create mode 100644 drivers/gpu/drm/sprd/Kconfig create mode 100644 drivers/gpu/drm/sprd/Makefile create mode 100644 drivers/gpu/drm/sprd/dpu_r2p0.c create mode 100644 drivers/gpu/drm/sprd/dw_dsi_ctrl.c create mode 100644 drivers/gpu/drm/sprd/dw_dsi_ctrl.h create mode 100644 drivers/gpu/drm/sprd/dw_dsi_ctrl_ppi.c create mode 100644 drivers/gpu/drm/sprd/dw_dsi_ctrl_ppi.h create mode 100644 drivers/gpu/drm/sprd/megacores_pll.c create mode 100644 drivers/gpu/drm/sprd/megacores_pll.h create mode 100644 drivers/gpu/drm/sprd/sprd_dpu.c create mode 100644 drivers/gpu/drm/sprd/sprd_dpu.h create mode 100644 drivers/gpu/drm/sprd/sprd_drm.c create mode 100644 drivers/gpu/drm/sprd/sprd_drm.h create mode 100644 drivers/gpu/drm/sprd/sprd_dsi.c create mode 100644 drivers/gpu/drm/sprd/sprd_dsi.h
Signature · 1 line
2.7.4
PATCH 1/6 dt-bindings: display: add Unisoc's drm master bindings
From: Kevin Tang <[email protected]>
The Unisoc DRM master device is a virtual device needed to list all DPU devices or other display interface nodes that comprise the graphics subsystem
Unisoc's display pipeline have several components as below description, multi display controllers and corresponding physical interfaces. For different display scenarios, dpu0 and dpu1 maybe binding to different encoder.
E.g:
dpu0 and dpu1 both binding to DSI for dual mipi-dsi display;
dpu0 binding to DSI for primary display, and dpu1 binding to DP for external display;
--- .../display/sprd/sprd,display-subsystem.yaml | 64 ++++++++++++++++++++++ 1 file changed, 64 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml new file +64 -0
@@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/sprd/sprd,display-subsystem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc DRM master device + +maintainers: + - Kevin Tang <[email protected]> + +description: | + The Unisoc DRM master device is a virtual device needed to list all + DPU devices or other display interface nodes that comprise the + graphics subsystem. + + Unisoc's display pipeline have several components as below description, + multi display controllers and corresponding physical interfaces. + For different display scenarios, dpu0 and dpu1 maybe binding to different + encoder. + + E.g: + dpu0 and dpu1 both binding to DSI for dual mipi-dsi display; + dpu0 binding to DSI for primary display, and dpu1 binding to DP for external display; + + +-----------------------------------------+ + | | + | +---------+ | + +----+ | +----+ +---------+ |DPHY/CPHY| | +------+ + | +----->+dpu0+--->+MIPI|DSI +--->+Combo +----->+Panel0| + |AXI | | +----+ +---------+ +---------+ | +------+ + | | | ^ | + | | | | | + | | | +-----------+ | + | | | | | + |APB | | +--+-+ +-----------+ +---+ | +------+ + | +----->+dpu1+--->+DisplayPort+--->+PHY+--------->+Panel1| + | | | +----+ +-----------+ +---+ | +------+ + +----+ | | + +-----------------------------------------+ + +properties: + compatible: + const: sprd,display-subsystem + + ports: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Should contain a list of phandles pointing to display interface port + of DPU devices. + +required: + - compatible + - ports + +additionalProperties: false + +examples: + - | + display-subsystem { + compatible = "sprd,display-subsystem"; + ports = <&dpu_out>; + }; +
Signature · 1 line
2.7.4
Re: [PATCH v1 1/6] dt-bindings: display: add Unisoc's drm master bindings
Quoted 15 lines · Kevin Tang
From: Kevin Tang <[email protected]>
The Unisoc DRM master device is a virtual device needed to list all DPU devices or other display interface nodes that comprise the graphics subsystem
Unisoc's display pipeline have several components as below description, multi display controllers and corresponding physical interfaces. For different display scenarios, dpu0 and dpu1 maybe binding to different encoder.
E.g:
dpu0 and dpu1 both binding to DSI for dual mipi-dsi display;
dpu0 binding to DSI for primary display, and dpu1 binding to DP for external display;
Quoted 8 lines
Cc Orson Zhai <[email protected]>Cc Chunyan Zhang <[email protected]>Signed-off-by Kevin Tang <[email protected]>--- .../display/sprd/sprd,display-subsystem.yaml | 64 ++++++++++++++++++++++ 1 file changed, 64 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 2/6 drm/sprd: add Unisoc's drm kms master
In reply to Kevin TangAdds drm support for the Unisoc's display subsystem.
This is drm kms driver, this driver provides support for the application framework in Android, Yocto and more.
Application framework can access Unisoc's display internel peripherals through libdrm or libkms, it's test ok by modetest (DRM/KMS test tool) and Android HWComposer.
--- drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/sprd/Kconfig | 12 +++ drivers/gpu/drm/sprd/Makefile | 5 + drivers/gpu/drm/sprd/sprd_drm.c | 222 ++++++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/sprd/sprd_drm.h | 16 +++ 6 files changed, 258 insertions(+) create mode 100644 drivers/gpu/drm/sprd/Kconfig create mode 100644 drivers/gpu/drm/sprd/Makefile create mode 100644 drivers/gpu/drm/sprd/sprd_drm.c create mode 100644 drivers/gpu/drm/sprd/sprd_drm.h
drivers/gpu/drm/Kconfig +2 -0
@@ -388,6 +388,8 @@ source "drivers/gpu/drm/tidss/Kconfig" source "drivers/gpu/drm/xlnx/Kconfig" +source "drivers/gpu/drm/sprd/Kconfig" + # Keep legacy drivers last menuconfig DRM_LEGACY
drivers/gpu/drm/Makefile +1 -0
@@ -124,3 +124,4 @@ obj-$(CONFIG_DRM_ASPEED_GFX) += aspeed/ obj-$(CONFIG_DRM_MCDE) += mcde/ obj-$(CONFIG_DRM_TIDSS) += tidss/ obj-y += xlnx/ +obj-$(CONFIG_DRM_SPRD) += sprd/
drivers/gpu/drm/sprd/Kconfig new file +12 -0
@@ -0,0 +1,12 @@ +config DRM_SPRD + tristate "DRM Support for Unisoc SoCs Platform" + depends on ARCH_SPRD || COMPILE_TEST + depends on DRM && OF + select DRM_KMS_HELPER + select DRM_GEM_CMA_HELPER + select DRM_KMS_CMA_HELPER + select DRM_MIPI_DSI + help + Choose this option if you have a Unisoc chipset. + If M is selected the module will be called sprd_drm. +
drivers/gpu/drm/sprd/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + +subdir-ccflags-y += -I$(srctree)/$(src) + +obj-y := sprd_drm.o
drivers/gpu/drm/sprd/sprd_drm.c new file +222 -0
222 lines not on this page · raw message
drivers/gpu/drm/sprd/sprd_drm.h new file +16 -0
@@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2020 Unisoc Inc. +*/ + +#ifndef _SPRD_DRM_H_ +#define _SPRD_DRM_H_ + +#include <drm/drm_atomic.h> +#include <drm/drm_print.h> + +struct sprd_drm { +struct drm_device drm; +}; + +#endif /* _SPRD_DRM_H_ */
Signature · 1 line
2.7.4
PATCH 3/6 dt-bindings: display: add Unisoc's dpu bindings
In reply to Kevin TangFrom: Kevin Tang <[email protected]>
DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs which transfers the image data from a video memory buffer to an internal LCD interface.
--- .../bindings/display/sprd/sprd,sharkl3-dpu.yaml | 83 ++++++++++++++++++++++ 1 file changed, 83 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml new file +83 -0
@@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc Sharkl3 Display Processor Unit (DPU) + +maintainers: + - Kevin Tang <[email protected]> + +description: | + DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs + which transfers the image data from a video memory buffer to an internal + LCD interface. + +properties: + compatible: + const: sprd,sharkl3-dpu + + reg: + maxItems: 1 + description: + Physical base address and length of the DPU registers set + + interrupts: + maxItems: 1 + description: + The interrupt signal from DPU + + clocks: + minItems: 2 + + clock-names: + items: + - const: clk_src_128m + - const: clk_src_384m + + power-domains: + maxItems: 1 + description: A phandle to DPU power domain node. + + iommus: + maxItems: 1 + description: A phandle to DPU iommu node. + + port: + type: object + description: + A port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + That port should be the output endpoint, usually output to + the associated DSI. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sprd,sc9860-clk.h> + dpu: dpu@63000000 { + compatible = "sprd,sharkl3-dpu"; + reg = <0x63000000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "clk_src_128m", "clk_src_384m"; + + clocks = <&pll CLK_TWPLL_128M>, + <&pll CLK_TWPLL_384M>; + + dpu_port: port { + dpu_out: endpoint { + remote-endpoint = <&dsi_in>; + }; + }; + };
Signature · 1 line
2.7.4
Re: [PATCH v1 3/6] dt-bindings: display: add Unisoc's dpu bindings
Quoted 34 lines · Kevin Tang
From: Kevin Tang <[email protected]>
DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs which transfers the image data from a video memory buffer to an internal LCD interface.
Cc Orson Zhai <[email protected]>Cc Chunyan Zhang <[email protected]>Signed-off-by Kevin Tang <[email protected]>--- .../bindings/display/sprd/sprd,sharkl3-dpu.yaml | 83 ++++++++++++++++++++++ 1 file changed, 83 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yamlDocumentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml new file +14
-0@@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc Sharkl3 Display Processor Unit (DPU) + +maintainers: + - Kevin Tang <[email protected]> + +description: | + DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs + which transfers the image data from a video memory buffer to an internal
Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml line 24
Quoted 10 lines
Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml new file +10
-0+ LCD interface. + +properties: + compatible: + const: sprd,sharkl3-dpu + + reg: + maxItems: 1 + description: + Physical base address and length of the DPU registers set
Drop. Nothing unique about this.
Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml line 29
Quoted 5 lines
Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml new file +5
-0+ + interrupts: + maxItems: 1 + description: + The interrupt signal from DPU
Drop.
Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml line 41
Quoted 12 lines
Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml new file +12
-0+ + clocks: + minItems: 2 + + clock-names: + items: + - const: clk_src_128m + - const: clk_src_384m + + power-domains: + maxItems: 1 + description: A phandle to DPU power domain node.
Drop.
Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml line 45
Quoted 4 lines
Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml new file +4
-0+ + iommus: + maxItems: 1 + description: A phandle to DPU iommu node.
Drop.
With those,
Quoted 41 lines
Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml new file +38
-0+ + port: + type: object + description: + A port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + That port should be the output endpoint, usually output to + the associated DSI. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sprd,sc9860-clk.h> + dpu: dpu@63000000 { + compatible = "sprd,sharkl3-dpu"; + reg = <0x63000000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "clk_src_128m", "clk_src_384m"; + + clocks = <&pll CLK_TWPLL_128M>, + <&pll CLK_TWPLL_384M>; + + dpu_port: port { + dpu_out: endpoint { + remote-endpoint = <&dsi_in>; + }; + }; + };Signature · 1 line
2.7.4
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 4/6 drm/sprd: add Unisoc's drm display controller driver
In reply to Kevin TangAdds DPU(Display Processor Unit) support for the Unisoc's display subsystem. It's support multi planes, scaler, rotation, PQ(Picture Quality) and more.
--- drivers/gpu/drm/sprd/Kconfig | 1 + drivers/gpu/drm/sprd/Makefile | 6 +- drivers/gpu/drm/sprd/dpu_r2p0.c | 598 ++++++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/sprd/sprd_dpu.c | 457 ++++++++++++++++++++++++++++++ drivers/gpu/drm/sprd/sprd_dpu.h | 175 ++++++++++++ drivers/gpu/drm/sprd/sprd_drm.c | 1 + drivers/gpu/drm/sprd/sprd_drm.h | 2 + 7 files changed, 1238 insertions(+), 2 deletions(-) create mode 100644 drivers/gpu/drm/sprd/dpu_r2p0.c create mode 100644 drivers/gpu/drm/sprd/sprd_dpu.c create mode 100644 drivers/gpu/drm/sprd/sprd_dpu.h
drivers/gpu/drm/sprd/Kconfig +1 -0
@@ -3,6 +3,7 @@ config DRM_SPRD depends on ARCH_SPRD || COMPILE_TEST depends on DRM && OF select DRM_KMS_HELPER + select VIDEOMODE_HELPERS select DRM_GEM_CMA_HELPER select DRM_KMS_CMA_HELPER select DRM_MIPI_DSI
drivers/gpu/drm/sprd/Makefile +4 -2
@@ -1,5 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 -subdir-ccflags-y += -I$(srctree)/$(src) +obj-y := sprd_drm.o \ + sprd_dpu.o + +obj-y += dpu_r2p0.o -obj-y := sprd_drm.o
drivers/gpu/drm/sprd/dpu_r2p0.c new file +598 -0
598 lines not on this page · raw message
drivers/gpu/drm/sprd/sprd_dpu.c new file +457 -0
457 lines not on this page · raw message
drivers/gpu/drm/sprd/sprd_dpu.h new file +175 -0
175 lines not on this page · raw message
drivers/gpu/drm/sprd/sprd_drm.c +1 -0
@@ -196,6 +196,7 @@ static struct platform_driver sprd_drm_driver = {static struct platform_driver *sprd_drm_drivers[] = { &sprd_drm_driver, + &sprd_dpu_driver, };static int __init sprd_drm_init (void )
drivers/gpu/drm/sprd/sprd_drm.h +2 -0
@@ -13,4 +13,6 @@ struct sprd_drm { struct drm_device drm; }; +extern struct platform_driver sprd_dpu_driver; +#endif /* _SPRD_DRM_H_ */
Signature · 1 line
2.7.4
PATCH 5/6 dt-bindings: display: add Unisoc's mipi dsi controller bindings
In reply to Kevin TangFrom: Kevin Tang <[email protected]>
Adds MIPI DSI Controller
support for Unisoc's display subsystem.
--- .../display/sprd/sprd,sharkl3-dsi-host.yaml | 107 +++++++++++++++++++++ 1 file changed, 107 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml new file +107 -0
@@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dsi-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc MIPI DSI Controller + +maintainers: + - Kevin Tang <[email protected]> + +properties: + compatible: + const: sprd,sharkl3-dsi-host + + reg: + maxItems: 1 + description: + Physical base address and length of the registers set for the device. + + interrupts: + maxItems: 2 + description: + Should contain DSI interrupt. + + clocks: + minItems: 1 + + clock-names: + items: + - const: clk_src_96m + + power-domains: + maxItems: 1 + description: A phandle to DSIM power domain node + + ports: + type: object + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: + A port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + That port should be the input endpoint, usually coming from + the associated DPU. + port@1: + type: object + description: + A port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + That port should be the output endpoint, usually output to + the associated panel. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sprd,sc9860-clk.h> + dsi: dsi@63100000 { + compatible = "sprd,sharkl3-dsi-host"; + reg = <0x63100000 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "clk_src_96m"; + clocks = <&pll CLK_TWPLL_96M>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <&dpu_out>; + }; + }; + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + };
Signature · 1 line
2.7.4
Re: [PATCH v1 5/6] dt-bindings: display: add Unisoc's mipi dsi controller bindings
Quoted 5 lines · Kevin Tang
From: Kevin Tang <[email protected]>
Adds MIPI DSI Controller
support for Unisoc's display subsystem.
Quoted 8 lines
Cc Orson Zhai <[email protected]>Cc Chunyan Zhang <[email protected]>Signed-off-by Kevin Tang <[email protected]>--- .../display/sprd/sprd,sharkl3-dsi-host.yaml | 107 +++++++++++++++++++++ 1 file changed, 107 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 6/6 drm/sprd: add Unisoc's drm mipi dsi&dphy driver
In reply to Kevin TangAdds dsi host controller support for the Unisoc's display subsystem. Adds dsi phy support for the Unisoc's display subsystem. Only MIPI DSI Displays supported, DP/TV/HMDI will be support in the feature.
v1:
- Remove dphy and dsi graph binding, merge the dphy driver into the dsi.
--- drivers/gpu/drm/sprd/Makefile | 8 +- drivers/gpu/drm/sprd/dw_dsi_ctrl.c | 792 +++++++++++++++++ drivers/gpu/drm/sprd/dw_dsi_ctrl.h | 1475 ++++++++++++++++++++++++++++++++ drivers/gpu/drm/sprd/dw_dsi_ctrl_ppi.c | 275 ++++++ drivers/gpu/drm/sprd/dw_dsi_ctrl_ppi.h | 34 + drivers/gpu/drm/sprd/megacores_pll.c | 316 +++++++ drivers/gpu/drm/sprd/megacores_pll.h | 146 ++++ drivers/gpu/drm/sprd/sprd_drm.c | 1 + drivers/gpu/drm/sprd/sprd_drm.h | 1 + drivers/gpu/drm/sprd/sprd_dsi.c | 1145 +++++++++++++++++++++++++ drivers/gpu/drm/sprd/sprd_dsi.h | 106 +++ 11 files changed, 4297 insertions(+), 2 deletions(-) create mode 100644 drivers/gpu/drm/sprd/dw_dsi_ctrl.c create mode 100644 drivers/gpu/drm/sprd/dw_dsi_ctrl.h create mode 100644 drivers/gpu/drm/sprd/dw_dsi_ctrl_ppi.c create mode 100644 drivers/gpu/drm/sprd/dw_dsi_ctrl_ppi.h create mode 100644 drivers/gpu/drm/sprd/megacores_pll.c create mode 100644 drivers/gpu/drm/sprd/megacores_pll.h create mode 100644 drivers/gpu/drm/sprd/sprd_dsi.c create mode 100644 drivers/gpu/drm/sprd/sprd_dsi.h
drivers/gpu/drm/sprd/Makefile +6 -2
@@ -1,7 +1,11 @@ # SPDX-License-Identifier: GPL-2.0 obj-y := sprd_drm.o \ - sprd_dpu.o + sprd_dpu.o \ + sprd_dsi.o \ + dpu_r2p0.o \ + dw_dsi_ctrl.o \ + dw_dsi_ctrl_ppi.o \ + megacores_pll.o -obj-y += dpu_r2p0.o
drivers/gpu/drm/sprd/dw_dsi_ctrl.c new file +792 -0
792 lines not on this page · raw message
drivers/gpu/drm/sprd/dw_dsi_ctrl.h new file +1475 -0
1,475 lines not on this page · raw message
drivers/gpu/drm/sprd/dw_dsi_ctrl_ppi.c new file +275 -0
275 lines not on this page · raw message
drivers/gpu/drm/sprd/dw_dsi_ctrl_ppi.h new file +34 -0
@@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2020 Unisoc Inc. +*/ + +#ifndef _DW_DSI_CTRL_PPI_H_ +#define _DW_DSI_CTRL_PPI_H_ + +#include "sprd_dsi.h" + +void dsi_phy_rstz (struct dsi_context *ctx,int level); +void dsi_phy_shutdownz (struct dsi_context *ctx,int level); +void dsi_phy_force_pll (struct dsi_context *ctx,int force); +void dsi_phy_clklane_ulps_rqst (struct dsi_context *ctx,int en); +void dsi_phy_clklane_ulps_exit (struct dsi_context *ctx,int en); +void dsi_phy_datalane_ulps_rqst (struct dsi_context *ctx,int en); +void dsi_phy_datalane_ulps_exit (struct dsi_context *ctx,int en); +void dsi_phy_stop_wait_time (struct dsi_context *ctx,u8 byte_clk); +void dsi_phy_datalane_en (struct dsi_context *ctx); +void dsi_phy_clklane_en (struct dsi_context *ctx,int en); +void dsi_phy_clk_hs_rqst (struct dsi_context *ctx,int en); +u8 dsi_phy_is_pll_locked (struct dsi_context *ctx); +u8 dsi_phy_is_stop_state_clklane (struct dsi_context *ctx); +u8 dsi_phy_is_stop_state_datalane (struct dsi_context *ctx); +u8 dsi_phy_is_ulps_active_datalane (struct dsi_context *ctx); +u8 dsi_phy_is_ulps_active_clklane (struct dsi_context *ctx); +void dsi_phy_test_clk (struct dsi_context *ctx,u8 level); +void dsi_phy_test_clr (struct dsi_context *ctx,u8 level); +void dsi_phy_test_en (struct dsi_context *ctx,u8 level); +u8 dsi_phy_test_dout (struct dsi_context *ctx); +void dsi_phy_test_din (struct dsi_context *ctx,u8 data); +void dsi_phy_bist_en (struct dsi_context *ctx,int en); + +#endif /* _DW_DSI_CTRL_PPI_H_ */
drivers/gpu/drm/sprd/megacores_pll.c new file +316 -0
316 lines not on this page · raw message
drivers/gpu/drm/sprd/megacores_pll.h new file +146 -0
94 lines not on this page · raw message
drivers/gpu/drm/sprd/sprd_dsi.c new file +1145 -0
1,145 lines not on this page · raw message
drivers/gpu/drm/sprd/sprd_dsi.h new file +106 -0
106 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.7.4
Part of the diff is not shown here. View the raw message.